ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 178 deletions

diff --git a/target/linux/ramips/dts/kng_rc.dts b/target/linux/ramips/dts/kng_rc.dts
deleted file mode 100644
index 3d6d2c6f06..0000000000
--- a/target/linux/ramips/dts/kng_rc.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "zyxel,keenetic-viva", "ralink,mt7620a-soc";
-	model = "ZyXEL Keenetic Viva";
-
-	aliases {
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_green;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wan {
-			label = "kng_rc:green:wan";
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		};
-
-		usb {
-			label = "kng_rc:green:usb";
-			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		power_alert {
-			label = "kng_rc:red:power";
-			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-		};
-
-		wifi {
-			label = "kng_rc:green:wifi";
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-		};
-
-		led_power_green: power {
-			label = "kng_rc:green:power";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		fn {
-			label = "fn";
-			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		usb_power {
-			gpio-export,name = "usb";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	rtl8367rb {
-		compatible = "realtek,rtl8367b";
-		cpu_port = <7>;
-		realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
-		mii-bus = <&mdio0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x50000 0xfb0000>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "i2c", "uartf";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&ethernet {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii2_pins &mdio_pins>;
-	mtd-mac-address = <&factory 0x00004>;
-
-	port@4 {
-		status = "okay";
-		mediatek,fixed-link = <1000 1 1 1>;
-		phy-mode = "rgmii";
-		phy-handle = <&phy4>;
-	};
-
-	mdio0: mdio-bus {
-		status = "okay";
-
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-			phy-mode = "rgmii";
-		};
-	};
-};
-
-&gsw {
-	mediatek,port4 = "gmac";
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};