aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts/mt7620a_iptime.dtsi
diff options
context:
space:
mode:
authorSungbo Eo <mans0n@gorani.run>2019-09-27 00:16:33 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-12-17 13:36:11 +0100
commit38bdfcdb87e9b3a1232e9820bd6534da4c28282b (patch)
tree0d548e896d109870cb6b7f71a7b0e3f8379bcaa8 /target/linux/ramips/dts/mt7620a_iptime.dtsi
parent01d39cd18c4035e362f179548cd2c051aac03042 (diff)
downloadupstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.tar.gz
upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.tar.bz2
upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.zip
ramips: add support for ipTIME A104ns
ipTIME A104ns is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 8MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610EN - Ethernet: 5x 10/100Mbps - Switch: SoC internal - USB: 1x 2.0 - UART: - J2: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1 Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. In contrast to to-be-supported A1004ns, the A104ns has no usable value in 0x1fc40 (uboot), so wan_mac needs to be calculated. Also note that GPIOs for the LEDs really are inverted compared to the A1004ns. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [moved state_default to device DTS, reordered properties in wmac, added comment about wan_mac and LED GPIOs] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/dts/mt7620a_iptime.dtsi')
-rw-r--r--target/linux/ramips/dts/mt7620a_iptime.dtsi86
1 files changed, 86 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7620a_iptime.dtsi b/target/linux/ramips/dts/mt7620a_iptime.dtsi
new file mode 100644
index 0000000000..5a6fdacb52
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_iptime.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &ethernet;
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "config";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ firmware: partition@30000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ };
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&uboot 0x1fc20>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&uboot 0x1f800>;
+ ieee80211-freq-limit = <5000000 6000000>;
+
+ led {
+ led-sources = <0>;
+ led-active-low;
+ };
+ };
+};
+
+&wmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wled_pins>;
+
+ ralink,mtd-eeprom = <&uboot 0x1f400>;
+};