ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 84 insertions, 0 deletions

diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts
new file mode 100644
index 0000000000..243126125b
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a_zbtlink_zbt-we826.dtsi"
+
+/ {
+	compatible = "zbtlink,zbt-we826-e", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
+	model = "ZBT-WE826-E";
+
+	/delete-node/ leds;
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: gsm {
+			label = "zbt-we826-e:blue:gsm";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		signal {
+			label = "zbt-we826-e:green:signal";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		sim {
+			label = "zbt-we826-e:red:sim";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		air {
+			label = "zbt-we826-e:red:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			firmware: partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x1fb0000>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		default {
+			ralink,group = "i2c", "uartf", "wled";
+			ralink,function = "gpio";
+		};
+	};
+};