aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts/mt7621_linksys_re6500.dts
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2021-03-17 18:35:34 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-03-21 22:45:20 +0100
commitb3ca1f30efd7bb96a22f72b766d302e552265276 (patch)
treec0f6085f2486e9433a86a25bea5dd429a506db73 /target/linux/ramips/dts/mt7621_linksys_re6500.dts
parentfdbdbe8eaaa6aa3acacdcb3ae1308b2a2055fc39 (diff)
downloadupstream-b3ca1f30efd7bb96a22f72b766d302e552265276.tar.gz
upstream-b3ca1f30efd7bb96a22f72b766d302e552265276.tar.bz2
upstream-b3ca1f30efd7bb96a22f72b766d302e552265276.zip
ramips: add support for ELECOM WRC-1750GST2
ELECOM WRC-1750GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (NT5CC128M16JR-EK) - Flash : SPI-NOR 32 MiB (MX25L25645GMI-08G) - WLAN : 2.4/5 GHz 3T3R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LEDs/Keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX, from ethernet port side - 57600n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-1750GST2 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC addresses: LAN : 04:AB:18:xx:xx:23 (Factory, 0xE000 (hex)) WAN : 04:AB:18:xx:xx:24 (Factory, 0xE006 (hex)) 2.4GHz : 04:AB:18:xx:xx:25 (Factory, 0x4 (hex)) 5GHz : 04:AB:18:xx:xx:26 (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ramips/dts/mt7621_linksys_re6500.dts')
0 files changed, 0 insertions, 0 deletions