aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts/mt7628an_jotale_js76x8.dtsi
diff options
context:
space:
mode:
authorRobinson Wu <wurobinson@qq.com>2020-07-17 15:32:53 +0800
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-07-31 11:40:15 +0200
commit84cb0f7ace73fad15e29e1d74c469b37f90b334d (patch)
tree544e0b4abf8f349606bdad031044467270428f76 /target/linux/ramips/dts/mt7628an_jotale_js76x8.dtsi
parentced167d72971e125825941dae22aad1d318c9dd2 (diff)
downloadupstream-84cb0f7ace73fad15e29e1d74c469b37f90b334d.tar.gz
upstream-84cb0f7ace73fad15e29e1d74c469b37f90b334d.tar.bz2
upstream-84cb0f7ace73fad15e29e1d74c469b37f90b334d.zip
ramips: add support for JS76x8 series DEV boards
This commit adds support for the Jotale JS76x8 series development boards. These devices have the following specifications: - SOC: MT7628AN/NN, MT7688AN, MT7628DAN - RAM of MT7628AN/NN and MT7688AN: 64/128/256 MB (DDR2) - RAM of MT7628DAN: 64 MB (DDR2) - FLASH:8/16/32 MB (SPI NOR) - Ethernet:3x 10/100 Mbps ethernet ports (MT76x8 built-in switch) - WIFI:1x 2T2R 2.4 GHz Wi-Fi - LEDs:1x system status green LED, 1x wifi green LED, 3x ethernet green LED - Buttons:1x reset button - 1x microSD slot - 4x USB 2.0 port - 1x mini-usb debug UART - 1x DC jack for main power (DC 5V) - 1x TTL/RS232 UART - 1x TTL/RS485 UART - 13x GPIO header - 1x audio codec(wm8960) Installation via OpenWrt: The original firmware is OpenWrt, so both LuCI and sysupgrade can be used. Installation via U-boot web: 1. Power on board with reset button pressed, release it after wifi led start blinking. 2. Setup static IP 192.168.1.123/4 on your PC. 3. Go to 192.168.1.8 in browser and upload "sysupgrade" image. Installation via U-boot tftp: 1. Connect to serial console at the mini usb, which has been connected to UART0 on board (115200 8N1) 2. Setup static IP 192.168.1.123/4 on your PC. 3. Place openwrt-firmware.bin on your PC tftp server (192.168.1.123). 3. Connect one of LAN ports on board to your PC. 4. Start terminal software (e.g. screen /dev/ttyUSB0 115200) on PC. 5. Apply power to board. 6. Interrupt U-boot with keypress of "2". 7. At u-boot prompts: Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N) Y Input device IP (192.168.1.8) ==:192.168.1.8 Input server IP (192.168.1.123) ==:192.168.1.123 Input Linux Kernel filename (root_uImage) ==:openwrt-firmware.bin 8. board will download file from tftp server, write it to flash and reboot. Signed-off-by: Robinson Wu <wurobinson@qq.com> [add license to DTS files, fix state_default and reduce to the mimimum, move phy0tpt trigger to DTS, drop ucidef_set_led_timer, fix network ports] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/dts/mt7628an_jotale_js76x8.dtsi')
-rw-r--r--target/linux/ramips/dts/mt7628an_jotale_js76x8.dtsi126
1 files changed, 126 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7628an_jotale_js76x8.dtsi b/target/linux/ramips/dts/mt7628an_jotale_js76x8.dtsi
new file mode 100644
index 0000000000..61c5d7b7c4
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_jotale_js76x8.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "jotale,js76x8", "mediatek,mt7628an-soc";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "js76x8:green:system";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "js76x8:green:wifi";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "refclk", "wdt", "wled_an";
+ function = "gpio";
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ m25p,chunked-io = <32>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ firmware: partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ /* reg property is set based on flash size in DTS files */
+ };
+ };
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&i2s {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&sdhci {
+ status = "okay";
+ mediatek,cd-low;
+};
+
+&wmac {
+ status = "okay";
+};