aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/image/mt76x8.mk
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2019-04-13 00:05:47 +0200
committerChristian Lamparter <chunkeey@gmail.com>2019-04-13 18:46:40 +0200
commit43e8c37cb4da64a12a3cb88a84b19db7f2fc640c (patch)
tree62e2f878f7e98afa7084bcf308d99c87a6779261 /target/linux/ramips/image/mt76x8.mk
parentb3f7a73860ae62da5a39babb1a5f28cb35f0aba0 (diff)
downloadupstream-43e8c37cb4da64a12a3cb88a84b19db7f2fc640c.tar.gz
upstream-43e8c37cb4da64a12a3cb88a84b19db7f2fc640c.tar.bz2
upstream-43e8c37cb4da64a12a3cb88a84b19db7f2fc640c.zip
ramips: add support for GL.iNet VIXMINI
Hardware -------- SoC: MediaTek MT7628NN RAM: 64M DDR2 (Etron EM68B16CWQD-25H) FLASH: 8M (Winbond W25Q64JVSIQ) LED: Power - WLAN BTN: Reset UART: 115200 8N1 TX and RX are labled on the board as pads next to the SoC Installation via web-interface ------------------------------ 1. Visit the web-interface at 192.168.8.1 Note: The ethernet port is by default WAN. So you need to connect to the router via WiFi 2. Navigate to the Update tab on the left side. 3. Select "Local Update" 4. Upload the OpenWrt sysupgrade image. Note: Make sure you select not to preserve the configuration. Installation via U-Boot ----------------------- 1. Hold down the reset button while powering on the device. Wait for the LED to flash 5 times. 2. Assign yourself a static IPv4 in 192.168.1.0/24 3. Upload the OpenWrt sysupgrade image at 192.168.1.1. Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ramips/image/mt76x8.mk')
-rw-r--r--target/linux/ramips/image/mt76x8.mk8
1 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index cb8f181955..02b03e5007 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -66,6 +66,14 @@ define Device/gl-mt300n-v2
endef
TARGET_DEVICES += gl-mt300n-v2
+define Device/glinet_vixmini
+ DTS := VIXMINI
+ IMAGE_SIZE := 7872k
+ DEVICE_TITLE := GL.iNet VIXMINI
+ SUPPORTED_DEVICES += vixmini
+endef
+TARGET_DEVICES += glinet_vixmini
+
define Device/hc5661a
DTS := HC5661A
IMAGE_SIZE := $(ralink_default_fw_size_16M)