diff options
author | David Bauer <mail@david-bauer.net> | 2020-05-19 22:49:35 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2020-05-22 21:54:30 +0200 |
commit | ebddc5f984a240980303aed68524eb615484eef8 (patch) | |
tree | f8eacc7f4ea3b557fa3163119e9c5bedcbdcf795 /target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration | |
parent | a9f75101508f64306710590bf45a326d4c2a1970 (diff) | |
download | upstream-ebddc5f984a240980303aed68524eb615484eef8.tar.gz upstream-ebddc5f984a240980303aed68524eb615484eef8.tar.bz2 upstream-ebddc5f984a240980303aed68524eb615484eef8.zip |
ath79: add support for Enterasys WS-AP3705i
Hardware
--------
SoC: Atheros AR9344
RAM: 128M DDR2
FLASH: 2x Macronix MX25L12845EM
2x 16MiB SPI-NOR
WLAN2: Atheros AR9344 2x2 2T2R
WLAN5: Atheros AR9580 2x2 2T2R
SERIAL: Cisco-RJ45 on the back (115200 8n1)
Installation
------------
The U-Boot CLI is password protected (using the same credentials as the
OS). Default is admin/new2day.
1. Download the OpenWrt initramfs-image. Place it into a TFTP server
root directory and rename it to 1401A8C0.img. Configure the TFTP
server to listen at 192.168.1.66/24.
2. Connect the TFTP server to the access point.
3. Connect to the serial console of the access point. Attach power and
interrupt the boot procedure when prompted (bootdelay is 1 second).
4. Configure the U-Boot environment for booting OpenWrt from Ram and
flash:
$ setenv boot_openwrt 'setenv bootargs; bootm 0xbf230000'
$ setenv ramboot_openwrt 'setenv serverip 192.168.1.66;
tftpboot 0x85000000; bootm'
$ setenv bootcmd 'run boot_openwrt'
$ saveenv
5. Load OpenWrt into memory:
$ run ramboot_openwrt
Wait for the image to boot.
6. Transfer the OpenWrt sysupgrade image to the device. Write the image
to flash using sysupgrade:
$ sysupgrade -n /path/to/openwrt-sysuograde.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration')
0 files changed, 0 insertions, 0 deletions