diff options
author | Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> | 2021-02-19 19:04:38 -0800 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-03-06 11:24:12 +0100 |
commit | 3149d8e7be6539897e9f3873ed9a2b9213a798a9 (patch) | |
tree | e0b17de217a6e55108bc178d77e46ecb5103acac /target/linux/ramips/patches-5.10/0102-staging-mt7621-pci-use-gpios-for-properly-reset.patch | |
parent | eda836e390af2e9f08618dde8e06af851e732a47 (diff) | |
download | upstream-3149d8e7be6539897e9f3873ed9a2b9213a798a9.tar.gz upstream-3149d8e7be6539897e9f3873ed9a2b9213a798a9.tar.bz2 upstream-3149d8e7be6539897e9f3873ed9a2b9213a798a9.zip |
ramips: 5.10: delete upstreamed patches
0098-disable_cm.patch is not needed because upstream fixed CM handling.
The rest are straightforward removals of upstreamed patches.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Diffstat (limited to 'target/linux/ramips/patches-5.10/0102-staging-mt7621-pci-use-gpios-for-properly-reset.patch')
-rw-r--r-- | target/linux/ramips/patches-5.10/0102-staging-mt7621-pci-use-gpios-for-properly-reset.patch | 222 |
1 files changed, 0 insertions, 222 deletions
diff --git a/target/linux/ramips/patches-5.10/0102-staging-mt7621-pci-use-gpios-for-properly-reset.patch b/target/linux/ramips/patches-5.10/0102-staging-mt7621-pci-use-gpios-for-properly-reset.patch deleted file mode 100644 index 1b7828f1e6..0000000000 --- a/target/linux/ramips/patches-5.10/0102-staging-mt7621-pci-use-gpios-for-properly-reset.patch +++ /dev/null @@ -1,222 +0,0 @@ -From 227a8bf421ff8b085444e51e471ef06a87228cfd Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos <sergio.paracuellos@gmail.com> -Date: Fri, 13 Mar 2020 21:09:08 +0100 -Subject: [PATCH] staging: mt7621-pci: use gpios for properly reset - -Original driver code was using three gpio's for reset -asserts and deasserts the pcis. Instead of using that -a general reset control with a perst gpio was introduced -and it seems it is partially working but sometimes there -are some unexpected hangs on boot. This commit make use of -the three original gpios using 'reset-gpios' property of -the device tree and removes the reset line and perst gpio. -According to the mediatek aplication note v0.1 there are -three gpios used for pcie ports reset control: gpio#19, -gpio#8 and gpio#7 for slots 0, 1 and 2 respectively. -This schema can be used separately for mt7621A but in some -boards due to pin share issue, if the PCM and I2S function -are enable at the same time, there are no enough GPIO to -control per-port PCIe reset. In those cases gpio#19 is enought -for reset the three ports together. Because of this we just -try to get the three gpios but if some of them fail we are not -failing in boot process, just prints a kernel notice and take -after into account if the descriptor is or not valid in order -to use it. All of them are set as GPIO output low configuration. -The gpio descriptor's API takes device tree property into account -and invert value if the pin is configured as active low. -So we also have to properly request pins from device tree -and set values correct in assert and deassert functions. -After this changes the order to make all assert and -deassert in the 'probe' process makes more sense: -* Parse device tree. -* make assert of the RC's and EP's before doing anything else. -* make deassert of the RC's before initializing the phy. -* Init the phy. -* make deassert of the EP's before initialize pci ports. -* Normal PCI initialization. - -Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> -Link: https://lore.kernel.org/r/20200313200913.24321-2-sergio.paracuellos@gmail.com -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> ---- - drivers/staging/mt7621-pci/pci-mt7621.c | 84 ++++++++++++++++++++------------- - 1 file changed, 51 insertions(+), 33 deletions(-) - ---- a/drivers/staging/mt7621-pci/pci-mt7621.c -+++ b/drivers/staging/mt7621-pci/pci-mt7621.c -@@ -95,6 +95,7 @@ - * @pcie: pointer to PCIe host info - * @phy: pointer to PHY control block - * @pcie_rst: pointer to port reset control -+ * @gpio_rst: gpio reset - * @slot: port slot - * @enabled: indicates if port is enabled - */ -@@ -104,6 +105,7 @@ struct mt7621_pcie_port { - struct mt7621_pcie *pcie; - struct phy *phy; - struct reset_control *pcie_rst; -+ struct gpio_desc *gpio_rst; - u32 slot; - bool enabled; - }; -@@ -117,8 +119,6 @@ struct mt7621_pcie_port { - * @offset: IO / Memory offset - * @dev: Pointer to PCIe device - * @ports: pointer to PCIe port information -- * @perst: gpio reset -- * @rst: pointer to pcie reset - * @resets_inverted: depends on chip revision - * reset lines are inverted. - */ -@@ -133,8 +133,6 @@ struct mt7621_pcie { - resource_size_t io; - } offset; - struct list_head ports; -- struct gpio_desc *perst; -- struct reset_control *rst; - bool resets_inverted; - }; - -@@ -210,16 +208,16 @@ static void write_config(struct mt7621_p - pcie_write(pcie, val, RALINK_PCI_CONFIG_DATA); - } - --static inline void mt7621_perst_gpio_pcie_assert(struct mt7621_pcie *pcie) -+static inline void mt7621_rst_gpio_pcie_assert(struct mt7621_pcie_port *port) - { -- gpiod_set_value(pcie->perst, 0); -- mdelay(PERST_DELAY_US); -+ if (port->gpio_rst) -+ gpiod_set_value(port->gpio_rst, 1); - } - --static inline void mt7621_perst_gpio_pcie_deassert(struct mt7621_pcie *pcie) -+static inline void mt7621_rst_gpio_pcie_deassert(struct mt7621_pcie_port *port) - { -- gpiod_set_value(pcie->perst, 1); -- mdelay(PERST_DELAY_US); -+ if (port->gpio_rst) -+ gpiod_set_value(port->gpio_rst, 0); - } - - static inline bool mt7621_pcie_port_is_linkup(struct mt7621_pcie_port *port) -@@ -367,6 +365,13 @@ static int mt7621_pcie_parse_port(struct - if (IS_ERR(port->phy)) - return PTR_ERR(port->phy); - -+ port->gpio_rst = devm_gpiod_get_index_optional(dev, "reset", slot, -+ GPIOD_OUT_LOW); -+ if (IS_ERR(port->gpio_rst)) { -+ dev_err(dev, "Failed to get GPIO for PCIe%d\n", slot); -+ return PTR_ERR(port->gpio_rst); -+ } -+ - port->slot = slot; - port->pcie = pcie; - -@@ -383,12 +388,6 @@ static int mt7621_pcie_parse_dt(struct m - struct resource regs; - int err; - -- pcie->perst = devm_gpiod_get(dev, "perst", GPIOD_OUT_HIGH); -- if (IS_ERR(pcie->perst)) { -- dev_err(dev, "failed to get gpio perst\n"); -- return PTR_ERR(pcie->perst); -- } -- - err = of_address_to_resource(node, 0, ®s); - if (err) { - dev_err(dev, "missing \"reg\" property\n"); -@@ -399,12 +398,6 @@ static int mt7621_pcie_parse_dt(struct m - if (IS_ERR(pcie->base)) - return PTR_ERR(pcie->base); - -- pcie->rst = devm_reset_control_get_exclusive(dev, "pcie"); -- if (PTR_ERR(pcie->rst) == -EPROBE_DEFER) { -- dev_err(dev, "failed to get pcie reset control\n"); -- return PTR_ERR(pcie->rst); -- } -- - for_each_available_child_of_node(node, child) { - int slot; - -@@ -458,16 +451,49 @@ static int mt7621_pcie_init_port(struct - return 0; - } - -+static void mt7621_pcie_reset_assert(struct mt7621_pcie *pcie) -+{ -+ struct mt7621_pcie_port *port; -+ -+ list_for_each_entry(port, &pcie->ports, list) { -+ /* PCIe RC reset assert */ -+ mt7621_control_assert(port); -+ -+ /* PCIe EP reset assert */ -+ mt7621_rst_gpio_pcie_assert(port); -+ } -+ -+ mdelay(PERST_DELAY_US); -+} -+ -+static void mt7621_pcie_reset_rc_deassert(struct mt7621_pcie *pcie) -+{ -+ struct mt7621_pcie_port *port; -+ -+ list_for_each_entry(port, &pcie->ports, list) -+ mt7621_control_deassert(port); -+} -+ -+static void mt7621_pcie_reset_ep_deassert(struct mt7621_pcie *pcie) -+{ -+ struct mt7621_pcie_port *port; -+ -+ list_for_each_entry(port, &pcie->ports, list) -+ mt7621_rst_gpio_pcie_deassert(port); -+ -+ mdelay(PERST_DELAY_US); -+} -+ - static void mt7621_pcie_init_ports(struct mt7621_pcie *pcie) - { - struct device *dev = pcie->dev; - struct mt7621_pcie_port *port, *tmp; -- u32 val = 0; - int err; - - rt_sysc_m32(PERST_MODE_MASK, PERST_MODE_GPIO, MT7621_GPIO_MODE); - -- mt7621_perst_gpio_pcie_assert(pcie); -+ mt7621_pcie_reset_assert(pcie); -+ mt7621_pcie_reset_rc_deassert(pcie); - - list_for_each_entry_safe(port, tmp, &pcie->ports, list) { - u32 slot = port->slot; -@@ -476,16 +502,10 @@ static void mt7621_pcie_init_ports(struc - if (err) { - dev_err(dev, "Initiating port %d failed\n", slot); - list_del(&port->list); -- } else { -- val = read_config(pcie, slot, PCIE_FTS_NUM); -- dev_info(dev, "Port %d N_FTS = %x\n", slot, -- (unsigned int)val); - } - } - -- reset_control_assert(pcie->rst); -- -- mt7621_perst_gpio_pcie_deassert(pcie); -+ mt7621_pcie_reset_ep_deassert(pcie); - - list_for_each_entry(port, &pcie->ports, list) { - u32 slot = port->slot; -@@ -499,8 +519,6 @@ static void mt7621_pcie_init_ports(struc - port->enabled = false; - } - } -- -- reset_control_deassert(pcie->rst); - } - - static void mt7621_pcie_enable_port(struct mt7621_pcie_port *port) |