ramips: split base-files into subtargets

While most of the target's contents are split into subtargets, the
base-files are maintained for the target as a whole.

However, OpenWrt already implements a mechanism that will use (and
even prefer) files in the subtargets' directories. This can be
exploited to make several scripts subtarget-specific and thus save
some space.

In certain cases, keeping files in parent (=target) base-files was
more convenient, and thus no splitting was performed for those.

Note that this will increase overall code lines, but reduce code
per subtarget.

base-files ipk size reduction:
master (mt7621)   60958 B
split (mt7620)    46358 B (- 14.3 kiB)
split (mt7621)    48759 B (- 11.9 kiB)
split (mt76x8)    44948 B (- 15.6 kiB)
split (rt288x)    43508 B (- 17.0 kiB)
split (rt305x)    45616 B (- 15.0 kiB)
split (rt3883)    44176 B (- 16.4 kiB)

Run-tested on:
GL.iNet GL-MT300N-V2 (mt76x8)
D-Link DWR-116 (mt7620)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 109 insertions, 0 deletions

diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..ae813e85d6
--- /dev/null
+++ b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+	ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+7links,px-4885-4m|\
+7links,px-4885-8m)
+	set_wifi_led "px-4885:orange:wifi"
+	;;
+airlive,air3gii|\
+aximcom,mr-102n|\
+edimax,3g-6200nl|\
+netgear,wnce2001)
+	set_wifi_led "$boardname:green:wlan"
+	;;
+alfa-network,w502u|\
+dlink,dir-300-b1|\
+dlink,dir-300-b7|\
+dlink,dir-320-b1|\
+dlink,dir-600-b1|\
+dlink,dir-610-a1|\
+dlink,dir-615-d|\
+dlink,dir-615-h1|\
+dlink,dir-620-a1|\
+engenius,esr-9753|\
+hilink,hlk-rm04|\
+nexx,wt1520-4m|\
+nexx,wt1520-8m|\
+skyline,sl-r7205|\
+tenda,w306r-v2|\
+zyxel,keenetic-start|\
+zyxel,keenetic|\
+zyxel,nbg-419n-v2)
+	set_wifi_led "rt2800pci-phy0::radio"
+	;;
+allnet,all0256n-4m|\
+allnet,all0256n-8m)
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
+	ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
+	set_wifi_led "rt2800pci-phy0::radio"
+	;;
+alphanetworks,asl26555-8m|\
+alphanetworks,asl26555-16m)
+	ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
+	set_wifi_led "asl26555:green:wlan"
+	;;
+asiarf,awapn2403)
+	set_wifi_led "rt2800soc-phy0::radio"
+	;;
+dlink,dcs-930l-b1)
+	ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
+	;;
+dlink,dir-620-d1|\
+trendnet,tew-714tru)
+	set_wifi_led "$boardname:green:wifi"
+	;;
+edimax,3g-6200n|\
+planex,mzk-w300nh2)
+	set_wifi_led "$boardname:amber:wlan"
+	;;
+fon,fonera-20n)
+	set_wifi_led "$boardname:orange:wifi"
+	;;
+hauppauge,broadway)
+	set_wifi_led "$boardname:red:wps_active"
+	;;
+hootoo,ht-tm02)
+	ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
+	set_wifi_led "$boardname:blue:wlan"
+	;;
+huawei,hg255d)
+	set_wifi_led "$boardname:green:wlan"
+	ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
+	;;
+intenso,memory2move)
+	set_wifi_led "$boardname:blue:wifi"
+	ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
+	;;
+omnima,miniembplug)
+	set_wifi_led "$boardname:red:wlan"
+	;;
+vocore,vocore-8m|\
+vocore,vocore-16m)
+	ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
+	;;
+zorlik,zl5900v2)
+	ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
+	;;
+esac
+
+board_config_flush
+
+exit 0