aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2018-11-17 08:47:40 +0000
committerJohn Crispin <john@phrozen.org>2018-11-26 12:16:52 +0100
commit20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c (patch)
tree514411700431f59bb7f7b6aa5141338f7e4498df /target/linux/ramips
parentb85fe43ec8c4d4aa34d3c0bbb3e57da3f176526b (diff)
downloadupstream-20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c.tar.gz
upstream-20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c.tar.bz2
upstream-20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c.zip
ramips: add support for Lava LR-25G001
The Lava LR-25G001 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610EN) - 5x 10/100/1000 Mbps AR8337 Switch (1 WAN AND 4 LAN) - 2x external, detachable antennas - 1x USB 2.0 - UART (J3) header on PCB (57600 8n1) - 8x LED (3x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - Work only three Gigabit ports (3/5, 1 WAN and 2LAN) Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/ramips')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh3
-rw-r--r--target/linux/ramips/dts/LR-25G001.dts182
-rw-r--r--target/linux/ramips/image/mt7620.mk15
-rw-r--r--target/linux/ramips/mt7620/config-4.142
7 files changed, 210 insertions, 3 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 29d3c31275..2f83f221f1 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -195,6 +195,10 @@ kn_rf|\
kng_rc)
set_wifi_led "$boardname:green:wifi"
;;
+lava,lr-25g001)
+ ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
+ ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"
+ ;;
linkits7688)
ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 6d5db45c50..043607df5b 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -353,6 +353,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"4:lan" "6@eth0"
;;
+ lava,lr-25g001|\
tew-691gr|\
tew-692gr|\
wlr-6000)
@@ -475,7 +476,8 @@ ramips_setup_macs()
;;
dlink,dwr-116-a1|\
dlink,dwr-118-a2|\
- dlink,dwr-921-c1)
+ dlink,dwr-921-c1|\
+ lava,lr-25g001)
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 711b8388ba..aee446d156 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -56,7 +56,8 @@ case "$FIRMWARE" in
case $board in
dlink,dwr-116-a1|\
dlink,dwr-118-a2|\
- dlink,dwr-921-c1)
+ dlink,dwr-921-c1|\
+ lava,lr-25g001)
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
wifi_mac=$(macaddr_add "$wan_mac" 1)
jboot_eeprom_extract "config" 0xE000
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index f54f2fbe77..ecc4650f68 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -295,7 +295,8 @@ platform_check_image() {
dlink,dwr-116-a1|\
dlink,dwr-118-a2|\
dlink,dwr-921-c1|\
- dwr-512-b)
+ dwr-512-b|\
+ lava,lr-25g001)
[ "$magic" != "0404242b" ] && {
echo "Invalid image type."
return 1
diff --git a/target/linux/ramips/dts/LR-25G001.dts b/target/linux/ramips/dts/LR-25G001.dts
new file mode 100644
index 0000000000..a89a6e57fb
--- /dev/null
+++ b/target/linux/ramips/dts/LR-25G001.dts
@@ -0,0 +1,182 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "lava,lr-25g001", "ralink,mt7620a-soc";
+ model = "LAVA LR-25G001";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "lava,lr-25g001:green:status";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2g {
+ label = "lava,lr-25g001:green:wifi2g";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi5g {
+ label = "lava,lr-25g001:green:wifi5g";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ mx25l12805d@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "firmware";
+ reg = <0x10000 0xfe0000>;
+ };
+
+ config: partition@ff0000 {
+ label = "config";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ port@5 {
+ status = "okay";
+ phy-mode = "rgmii";
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+
+ mdio-bus {
+ status = "okay";
+ mediatek,mdio-mode = <1>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ qca,ar8327-initvals = <
+ 0x04 0x87300000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x00000000 /* PORT6_STATUS */
+
+ >;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76x0e@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&config 0xe07e>;
+ mtd-mac-address-increment = <(2)>;
+ mediatek,mtd-eeprom = <&config 0xe08a>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "i2c";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 61a6e56937..5e3d37b5c8 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -352,6 +352,21 @@ define Device/microwrt
endef
TARGET_DEVICES += microwrt
+define Device/lava_lr-25g001
+ DTS := LR-25G001
+ DEVICE_TITLE := LAVA LR-25G001
+ DLINK_ROM_ID := LVA6E3804001
+ DLINK_FAMILY_MEMBER := 0x6E38
+ DLINK_FIRMWARE_SIZE := 0xFE0000
+ KERNEL := $(KERNEL_DTB)
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := mkdlinkfw | pad-rootfs | append-metadata
+ IMAGE/factory.bin := mkdlinkfw | pad-rootfs | mkdlinkfw-factory
+ DEVICE_PACKAGES := jboot-tools kmod-usb2 kmod-mt76 kmod-mt76x0-common \
+ kmod-mt76x0e
+endef
+TARGET_DEVICES += lava_lr-25g001
+
define Device/miwifi-mini
DTS := MIWIFI-MINI
IMAGE_SIZE := $(ralink_default_fw_size_16M)
diff --git a/target/linux/ramips/mt7620/config-4.14 b/target/linux/ramips/mt7620/config-4.14
index 1162ed47b2..e1a8e0c73b 100644
--- a/target/linux/ramips/mt7620/config-4.14
+++ b/target/linux/ramips/mt7620/config-4.14
@@ -1,3 +1,4 @@
+CONFIG_AR8216_PHY=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
@@ -57,6 +58,7 @@ CONFIG_DTB_RT_NONE=y
# CONFIG_DTB_VOCORE2 is not set
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y