aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorMathias Kresin <dev@kresin.me>2018-08-30 19:16:53 +0200
committerMathias Kresin <dev@kresin.me>2018-09-06 21:35:53 +0200
commit287b7aa583584262a68fcebc3786779b2ab14307 (patch)
treee7c4824f71b294a7d49011f25e3f6871c44f89dd /target/linux/ramips
parent563a5b5f94b2fb36dce36f39bf6515e5bbb31245 (diff)
downloadupstream-287b7aa583584262a68fcebc3786779b2ab14307.tar.gz
upstream-287b7aa583584262a68fcebc3786779b2ab14307.tar.bz2
upstream-287b7aa583584262a68fcebc3786779b2ab14307.zip
ramips: drop obsolete sd card driver code
The pinmux for all SoCs using this driver is now set via the pinmux. It makes this code obsolete. Some of the code targeting the mt76x8 SoCs is still required. The sd card pins share the pads with the EPHY. These pads need to be switched to digital mode if the pins are used for sd cards. The eMMC 8-bit mode has to be enabled via pinmux instead of a kernel option. The uart2 group need to be set to function "sdxc d5 d4", pwm1 to "sdxc d6" and pwm0 to "sdxc d7" to do so. It can't be done by as part of a default pinmux, as it would break the normal operation of uart2. Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/Kconfig4
-rw-r--r--target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c20
2 files changed, 4 insertions, 20 deletions
diff --git a/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/Kconfig b/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/Kconfig
index a58b0f3dc1..d23ed777fe 100644
--- a/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/Kconfig
+++ b/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/Kconfig
@@ -10,7 +10,3 @@ config MTK_MMC_CD_POLL
bool "Card Detect with Polling"
depends on MTK_MMC
-config MTK_MMC_EMMC_8BIT
- bool "eMMC 8-bit support"
- depends on MTK_MMC && RALINK_MT7628
-
diff --git a/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c b/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c
index 97ae927d2d..4ced4b6605 100644
--- a/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c
+++ b/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c
@@ -2207,27 +2207,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
int ret;
u32 reg;
- // Set the pins for sdxc to sdxc mode
- //FIXME: this should be done by pinctl and not by the sd driver
- if (ralink_soc == MT762X_SOC_MT7620A ||
- ralink_soc == MT762X_SOC_MT7621AT) {
- reg = sdr_read32((void __iomem *)(RALINK_SYSCTL_BASE +
- 0x60)) & ~(0x3 << 18);
- if (ralink_soc == MT762X_SOC_MT7620A)
- reg |= 0x1 << 18;
- } else {
+ //FIXME: this should be done by pinconf and not by the sd driver
+ if (ralink_soc == MT762X_SOC_MT7688 ||
+ ralink_soc == MT762X_SOC_MT7628AN) {
+ /* set EPHY pads to digital mode */
reg = sdr_read32((void __iomem *)(RALINK_SYSCTL_BASE + 0x3c));
reg |= 0x1e << 16;
sdr_write32((void __iomem *)(RALINK_SYSCTL_BASE + 0x3c), reg);
- reg = sdr_read32((void __iomem *)(RALINK_SYSCTL_BASE +
- 0x60)) & ~(0x3 << 10);
-#if defined(CONFIG_MTK_MMC_EMMC_8BIT)
- reg |= 0x3 << 26 | 0x3 << 28 | 0x3 << 30;
-#endif
}
- sdr_write32((void __iomem *)(RALINK_SYSCTL_BASE + 0x60), reg);
-
hw = &msdc0_hw;
if (of_property_read_bool(pdev->dev.of_node, "mtk,wp-en"))