aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorMatthias Badaire <mbadaire@gmail.com>2018-04-15 22:34:05 +0200
committerMathias Kresin <dev@kresin.me>2018-05-07 18:54:23 +0200
commit5ef79af4f80f772772e44e38478f2b3b78d40732 (patch)
treefd56ba00858440e4c0e9b13420d64d1da5396161 /target/linux/ramips
parentef19747b6ce332ec5d4d76eda0efbe939eb49cec (diff)
downloadupstream-5ef79af4f80f772772e44e38478f2b3b78d40732.tar.gz
upstream-5ef79af4f80f772772e44e38478f2b3b78d40732.tar.bz2
upstream-5ef79af4f80f772772e44e38478f2b3b78d40732.zip
ramips: add support for Ravpower WD03
The RavPower WD03 is a battery powered SD card reader and a USB port. Specifications: SOC: MediaTek MT7620N BATTERY: 6000mah WLAN: 802.11bgn LAN: 1x 10/100 Mbps Ethernet USB: 1x USB 2.0 (Type-A) RAM: PM Tech PMD708416CTR-5CN 32 MB FLASH: Holtek HT66F40 - 8 MB Flash LED: Power button and 4 leds to indicate power level of the battery (could not get control of that) INPUT: Power, reset button OTHER: USB SD-Card reader with card detect on GPIO#42 Tested and working: - Ethernet - 2.4 GHz WiFi (Correct MAC-address) - installation from tftp - OpenWRT sysupgrade (Preserving and non-preserving) - LEDs - Buttons Installation: - Download the sysupgrade image - Place it in the root of a clean TFTP server running on your computer. - Rename the image to "kernel" — be sure there is no file extension. - Plug the WD03 into your computer via ethernet. - Set your computer to use 10.10.10.254 as its IP address. - With your WD03 shut down, hold down the power button until the first white LED lights up. - Push and hold the reset button and release the power button. Continue holding the reset button for 30 seconds or until it begins searching for files on your TFTP server, whichever comes first. - The WD03 (10.10.10.128) will look for your computer at 10.10.10.254 and install the kernel file. Once it has finished installation of the kernel file, it will search for a (nonexistent) rootfs file — when it begins searching for this file, shut down the WD03 by holding the power button normally. - Start up your WD03 normally. Signed-off-by: Matthias Badaire <mbadaire@gmail.com>
Diffstat (limited to 'target/linux/ramips')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/WD03.dts112
-rw-r--r--target/linux/ramips/image/mt7620.mk8
4 files changed, 122 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index b7e5fb6ff9..5d25cdba96 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -208,6 +208,7 @@ ramips_setup_interfaces()
ubnt-erx|\
ubnt-erx-sfp|\
ur-326n4g|\
+ ravpower,wd03|\
wrtnode|\
wrtnode2p | \
wrtnode2r | \
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 0a43f29920..ff73d6474b 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -165,6 +165,7 @@ platform_check_image() {
w2914nsv2|\
w306r-v20|\
w502u|\
+ ravpower,wd03|\
wf-2881|\
whr-1166d|\
whr-300hp2|\
diff --git a/target/linux/ramips/dts/WD03.dts b/target/linux/ramips/dts/WD03.dts
new file mode 100644
index 0000000000..454e757ce1
--- /dev/null
+++ b/target/linux/ramips/dts/WD03.dts
@@ -0,0 +1,112 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ravpower,wd03", "ralink,mt7620a-soc";
+ model = "Ravpower WD03";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ green-wifi {
+ label = "wd03:green:wifi";
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ };
+
+
+ blue-wifi {
+ label = "wd03:blue:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4000>;
+ ralink,port-map = "wllll";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled", "ephy";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 102a846e02..6ddbf066df 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -479,6 +479,14 @@ define Device/vonets_var11n-300
endef
TARGET_DEVICES += vonets_var11n-300
+define Device/ravpower_wd03
+ DTS := WD03
+ IMAGE_SIZE := $(ralink_default_fw_size_8M)
+ DEVICE_TITLE := Ravpower WD03
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-usb-ehci
+endef
+TARGET_DEVICES += ravpower_wd03
+
define Device/whr-1166d
DTS := WHR-1166D
IMAGE_SIZE := 15040k