aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorWeijie Gao <hackpascal@gmail.com>2018-11-19 01:14:53 +0800
committerJohn Crispin <john@phrozen.org>2018-11-26 12:13:52 +0100
commitc7ca224299e77f5d822dd154b99fe9aeefc550be (patch)
treedb43a6a8815e505967b6d408888e2d987402356c /target/linux/ramips
parentf5af8be636c94c933674c6a914ae8a752100a8be (diff)
downloadupstream-c7ca224299e77f5d822dd154b99fe9aeefc550be.tar.gz
upstream-c7ca224299e77f5d822dd154b99fe9aeefc550be.tar.bz2
upstream-c7ca224299e77f5d822dd154b99fe9aeefc550be.zip
ramips: fix cpu clock of mt7621 and add dt clk devices
For a long time the mt7621 uses a fixed cpu clock which causes a problem if the cpu frequency is not 880MHz. This patch fixes the cpu clock calculation and adds the cpu/bus clkdev which will be used in dts. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--target/linux/ramips/dts/mt7621.dtsi8
-rw-r--r--target/linux/ramips/patches-4.14/101-mt7621-timer.patch19
-rw-r--r--target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch224
3 files changed, 232 insertions, 19 deletions
diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi
index ee86d0c3c5..89f3f6fe2d 100644
--- a/target/linux/ramips/dts/mt7621.dtsi
+++ b/target/linux/ramips/dts/mt7621.dtsi
@@ -1,4 +1,5 @@
#include <dt-bindings/interrupt-controller/mips-gic.h>
+#include <dt-bindings/clock/mt7621-clk.h>
/ {
#address-cells = <1>;
@@ -33,6 +34,13 @@
serial0 = &uartlite;
};
+ pll: pll {
+ compatible = "mediatek,mt7621-pll", "syscon";
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "bus";
+ };
+
cpuclock: cpuclock {
#clock-cells = <0>;
compatible = "fixed-clock";
diff --git a/target/linux/ramips/patches-4.14/101-mt7621-timer.patch b/target/linux/ramips/patches-4.14/101-mt7621-timer.patch
index 5bbe137f1e..c7c4a40f97 100644
--- a/target/linux/ramips/patches-4.14/101-mt7621-timer.patch
+++ b/target/linux/ramips/patches-4.14/101-mt7621-timer.patch
@@ -85,22 +85,3 @@
endchoice
choice
---- a/arch/mips/ralink/timer-gic.c
-+++ b/arch/mips/ralink/timer-gic.c
-@@ -12,6 +12,7 @@
- #include <linux/of.h>
- #include <linux/clk-provider.h>
- #include <linux/clocksource.h>
-+#include <asm/time.h>
-
- #include "common.h"
-
-@@ -19,6 +20,8 @@ void __init plat_time_init(void)
- {
- ralink_of_remap();
-
-+ mips_hpt_frequency = 880000000 / 2;
-+
- of_clk_init(NULL);
- timer_probe();
- }
diff --git a/target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch b/target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch
new file mode 100644
index 0000000000..67062d1cd8
--- /dev/null
+++ b/target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch
@@ -0,0 +1,224 @@
+--- a/arch/mips/include/asm/mach-ralink/mt7621.h
++++ b/arch/mips/include/asm/mach-ralink/mt7621.h
+@@ -19,6 +19,10 @@
+ #define SYSC_REG_CHIP_REV 0x0c
+ #define SYSC_REG_SYSTEM_CONFIG0 0x10
+ #define SYSC_REG_SYSTEM_CONFIG1 0x14
++#define SYSC_REG_CLKCFG0 0x2c
++#define SYSC_REG_CUR_CLK_STS 0x44
++
++#define MEMC_REG_CPU_PLL 0x648
+
+ #define CHIP_REV_PKG_MASK 0x1
+ #define CHIP_REV_PKG_SHIFT 16
+@@ -26,6 +30,22 @@
+ #define CHIP_REV_VER_SHIFT 8
+ #define CHIP_REV_ECO_MASK 0xf
+
++#define XTAL_MODE_SEL_MASK 0x7
++#define XTAL_MODE_SEL_SHIFT 6
++
++#define CPU_CLK_SEL_MASK 0x3
++#define CPU_CLK_SEL_SHIFT 30
++
++#define CUR_CPU_FDIV_MASK 0x1f
++#define CUR_CPU_FDIV_SHIFT 8
++#define CUR_CPU_FFRAC_MASK 0x1f
++#define CUR_CPU_FFRAC_SHIFT 0
++
++#define CPU_PLL_PREDIV_MASK 0x3
++#define CPU_PLL_PREDIV_SHIFT 12
++#define CPU_PLL_FBDIV_MASK 0x7f
++#define CPU_PLL_FBDIV_SHIFT 4
++
+ #define MT7621_DRAM_BASE 0x0
+ #define MT7621_DDR2_SIZE_MIN 32
+ #define MT7621_DDR2_SIZE_MAX 256
+--- a/arch/mips/ralink/mt7621.c
++++ b/arch/mips/ralink/mt7621.c
+@@ -10,6 +10,10 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/jiffies.h>
++#include <linux/clk.h>
++#include <linux/clkdev.h>
++#include <linux/clk-provider.h>
++#include <dt-bindings/clock/mt7621-clk.h>
+
+ #include <asm/mipsregs.h>
+ #include <asm/smp-ops.h>
+@@ -18,16 +22,12 @@
+ #include <asm/mach-ralink/mt7621.h>
+ #include <asm/mips-boards/launch.h>
+ #include <asm/delay.h>
++#include <asm/time.h>
+
+ #include <pinmux.h>
+
+ #include "common.h"
+
+-#define SYSC_REG_SYSCFG 0x10
+-#define SYSC_REG_CPLL_CLKCFG0 0x2c
+-#define SYSC_REG_CUR_CLK_STS 0x44
+-#define CPU_CLK_SEL (BIT(30) | BIT(31))
+-
+ #define MT7621_GPIO_MODE_UART1 1
+ #define MT7621_GPIO_MODE_I2C 2
+ #define MT7621_GPIO_MODE_UART3_MASK 0x3
+@@ -113,49 +113,89 @@ static struct rt2880_pmx_group mt7621_pi
+ { 0 }
+ };
+
++static struct clk *clks[MT7621_CLK_MAX];
++static struct clk_onecell_data clk_data = {
++ .clks = clks,
++ .clk_num = ARRAY_SIZE(clks),
++};
++
+ phys_addr_t mips_cpc_default_phys_base(void)
+ {
+ panic("Cannot detect cpc address");
+ }
+
+-void __init ralink_clk_init(void)
++static struct clk *__init mt7621_add_sys_clkdev(
++ const char *id, unsigned long rate)
+ {
+- int cpu_fdiv = 0;
+- int cpu_ffrac = 0;
+- int fbdiv = 0;
+- u32 clk_sts, syscfg;
+- u8 clk_sel = 0, xtal_mode;
+- u32 cpu_clk;
++ struct clk *clk;
++ int err;
++
++ clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
++ if (IS_ERR(clk))
++ panic("failed to allocate %s clock structure", id);
++
++ err = clk_register_clkdev(clk, id, NULL);
++ if (err)
++ panic("unable to register %s clock device", id);
+
+- if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
+- clk_sel = 1;
++ return clk;
++}
++
++void __init ralink_clk_init(void)
++{
++ u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
++ u32 pll, prediv, fbdiv;
++ u32 xtal_clk, cpu_clk, bus_clk;
++ const static u32 prediv_tbl[] = {0, 1, 2, 2};
++
++ syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
++ xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
++
++ clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0);
++ clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK;
++
++ curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
++ ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK;
++ ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK;
++
++ if (xtal_sel <= 2)
++ xtal_clk = 20 * 1000 * 1000;
++ else if (xtal_sel <= 5)
++ xtal_clk = 40 * 1000 * 1000;
++ else
++ xtal_clk = 25 * 1000 * 1000;
+
+ switch (clk_sel) {
+ case 0:
+- clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
+- cpu_fdiv = ((clk_sts >> 8) & 0x1F);
+- cpu_ffrac = (clk_sts & 0x1F);
+- cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
++ cpu_clk = 500 * 1000 * 1000;
+ break;
+-
+ case 1:
+- fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
+- syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
+- xtal_mode = (syscfg >> 6) & 0x7;
+- if (xtal_mode >= 6) {
+- /* 25Mhz Xtal */
+- cpu_clk = 25 * fbdiv * 1000 * 1000;
+- } else if (xtal_mode >= 3) {
+- /* 40Mhz Xtal */
+- cpu_clk = 40 * fbdiv * 1000 * 1000;
+- } else {
+- /* 20Mhz Xtal */
+- cpu_clk = 20 * fbdiv * 1000 * 1000;
+- }
++ pll = rt_memc_r32(MEMC_REG_CPU_PLL);
++ fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK;
++ prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK;
++ cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv];
+ break;
++ default:
++ cpu_clk = xtal_clk;
+ }
++
++ cpu_clk = cpu_clk / ffiv * ffrac;
++ bus_clk = cpu_clk / 4;
++
++ clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk);
++ clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk);
++
++ pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000);
++ mips_hpt_frequency = cpu_clk / 2;
+ }
+
++static void __init mt7621_clocks_init_dt(struct device_node *np)
++{
++ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
++}
++
++CLK_OF_DECLARE(ar7100, "mediatek,mt7621-pll", mt7621_clocks_init_dt);
++
+ void __init ralink_of_remap(void)
+ {
+ rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
+--- a/arch/mips/ralink/timer-gic.c
++++ b/arch/mips/ralink/timer-gic.c
+@@ -11,14 +11,14 @@
+
+ #include <linux/of.h>
+ #include <linux/clk-provider.h>
+-#include <linux/clocksource.h>
++#include <asm/time.h>
+
+ #include "common.h"
+
+ void __init plat_time_init(void)
+ {
+ ralink_of_remap();
+-
++ ralink_clk_init();
+ of_clk_init(NULL);
+ timer_probe();
+ }
+--- a/include/dt-bindings/clock/mt7621-clk.h
++++ b/include/dt-bindings/clock/mt7621-clk.h
+@@ -0,0 +1,18 @@
++/*
++ * Copyright (C) 2018 Weijie Gao <hackpascal@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#ifndef __DT_BINDINGS_MT7621_CLK_H
++#define __DT_BINDINGS_MT7621_CLK_H
++
++#define MT7621_CLK_CPU 0
++#define MT7621_CLK_BUS 1
++
++#define MT7621_CLK_MAX 2
++
++#endif /* __DT_BINDINGS_MT7621_CLK_H */