aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/rdc
diff options
context:
space:
mode:
authorFlorian Fainelli <florian@openwrt.org>2010-05-21 09:53:59 +0000
committerFlorian Fainelli <florian@openwrt.org>2010-05-21 09:53:59 +0000
commit58405b0509e97c7f7fdf7a5a83e9e223bc25ca2a (patch)
tree0ff83bd4b7a2ab3f59706b52bfadff7594eafdf0 /target/linux/rdc
parent22eaf8b658736a1dd2fbf28c61abc720ff0ff4fb (diff)
downloadupstream-58405b0509e97c7f7fdf7a5a83e9e223bc25ca2a.tar.gz
upstream-58405b0509e97c7f7fdf7a5a83e9e223bc25ca2a.tar.bz2
upstream-58405b0509e97c7f7fdf7a5a83e9e223bc25ca2a.zip
add r6040 phylib support which allows to use the ip175c switch driver on ar525w
SVN-Revision: 21521
Diffstat (limited to 'target/linux/rdc')
-rw-r--r--target/linux/rdc/Makefile2
-rw-r--r--target/linux/rdc/patches-2.6.32/014-r6040_phylib_support.patch468
-rw-r--r--target/linux/rdc/profiles/ar525w.mk4
3 files changed, 471 insertions, 3 deletions
diff --git a/target/linux/rdc/Makefile b/target/linux/rdc/Makefile
index 738af3f02b..391ee68f83 100644
--- a/target/linux/rdc/Makefile
+++ b/target/linux/rdc/Makefile
@@ -16,7 +16,7 @@ LINUX_VERSION:=2.6.32.12
include $(INCLUDE_DIR)/target.mk
-DEFAULT_PACKAGES += wpad-mini kmod-r6040 kmod-input-core \
+DEFAULT_PACKAGES += wpad-mini kmod-libphy kmod-r6040 kmod-input-core \
kmod-input-polldev kmod-input-gpio-buttons kmod-button-hotplug \
kmod-rdc321x-wdt
diff --git a/target/linux/rdc/patches-2.6.32/014-r6040_phylib_support.patch b/target/linux/rdc/patches-2.6.32/014-r6040_phylib_support.patch
new file mode 100644
index 0000000000..9a9422877a
--- /dev/null
+++ b/target/linux/rdc/patches-2.6.32/014-r6040_phylib_support.patch
@@ -0,0 +1,468 @@
+Index: linux-2.6.32.12/drivers/net/r6040.c
+===================================================================
+--- linux-2.6.32.12.orig/drivers/net/r6040.c 2010-05-20 10:19:41.000000000 +0200
++++ linux-2.6.32.12/drivers/net/r6040.c 2010-05-20 10:28:48.000000000 +0200
+@@ -45,6 +45,7 @@
+ #include <linux/io.h>
+ #include <linux/irq.h>
+ #include <linux/uaccess.h>
++#include <linux/phy.h>
+
+ #include <asm/processor.h>
+
+@@ -180,7 +181,6 @@
+
+ struct r6040_private {
+ spinlock_t lock; /* driver lock */
+- struct timer_list timer;
+ struct pci_dev *pdev;
+ struct r6040_descriptor *rx_insert_ptr;
+ struct r6040_descriptor *rx_remove_ptr;
+@@ -190,13 +190,15 @@
+ struct r6040_descriptor *tx_ring;
+ dma_addr_t rx_ring_dma;
+ dma_addr_t tx_ring_dma;
+- u16 tx_free_desc, phy_addr, phy_mode;
++ u16 tx_free_desc, phy_addr;
+ u16 mcr0, mcr1;
+- u16 switch_sig;
+ struct net_device *dev;
+- struct mii_if_info mii_if;
++ struct mii_bus *mii_bus;
+ struct napi_struct napi;
+ void __iomem *base;
++ struct phy_device *phydev;
++ int old_link;
++ int old_duplex;
+ };
+
+ static char version[] __devinitdata = KERN_INFO DRV_NAME
+@@ -239,20 +241,29 @@
+ }
+ }
+
+-static int r6040_mdio_read(struct net_device *dev, int mii_id, int reg)
++static int r6040_mdiobus_read(struct mii_bus *bus, int phy_addr, int reg)
+ {
++ struct net_device *dev = bus->priv;
+ struct r6040_private *lp = netdev_priv(dev);
+ void __iomem *ioaddr = lp->base;
+
+- return (r6040_phy_read(ioaddr, lp->phy_addr, reg));
++ return r6040_phy_read(ioaddr, phy_addr, reg);
+ }
+
+-static void r6040_mdio_write(struct net_device *dev, int mii_id, int reg, int val)
++static int r6040_mdiobus_write(struct mii_bus *bus, int phy_addr, int reg, u16 value)
+ {
++ struct net_device *dev = bus->priv;
+ struct r6040_private *lp = netdev_priv(dev);
+ void __iomem *ioaddr = lp->base;
+
+- r6040_phy_write(ioaddr, lp->phy_addr, reg, val);
++ r6040_phy_write(ioaddr, phy_addr, reg, value);
++
++ return 0;
++}
++
++static int r6040_mdiobus_reset(struct mii_bus *bus)
++{
++ return 0;
+ }
+
+ static void r6040_free_txbufs(struct net_device *dev)
+@@ -409,10 +420,9 @@
+ void __iomem *ioaddr = priv->base;
+
+ printk(KERN_WARNING "%s: transmit timed out, int enable %4.4x "
+- "status %4.4x, PHY status %4.4x\n",
++ "status %4.4x\n",
+ dev->name, ioread16(ioaddr + MIER),
+- ioread16(ioaddr + MISR),
+- r6040_mdio_read(dev, priv->mii_if.phy_id, MII_BMSR));
++ ioread16(ioaddr + MISR));
+
+ dev->stats.tx_errors++;
+
+@@ -464,9 +474,6 @@
+ struct r6040_private *lp = netdev_priv(dev);
+ struct pci_dev *pdev = lp->pdev;
+
+- /* deleted timer */
+- del_timer_sync(&lp->timer);
+-
+ spin_lock_irq(&lp->lock);
+ napi_disable(&lp->napi);
+ netif_stop_queue(dev);
+@@ -496,64 +503,14 @@
+ return 0;
+ }
+
+-/* Status of PHY CHIP */
+-static int r6040_phy_mode_chk(struct net_device *dev)
+-{
+- struct r6040_private *lp = netdev_priv(dev);
+- void __iomem *ioaddr = lp->base;
+- int phy_dat;
+-
+- /* PHY Link Status Check */
+- phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 1);
+- if (!(phy_dat & 0x4))
+- phy_dat = 0x8000; /* Link Failed, full duplex */
+-
+- /* PHY Chip Auto-Negotiation Status */
+- phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 1);
+- if (phy_dat & 0x0020) {
+- /* Auto Negotiation Mode */
+- phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 5);
+- phy_dat &= r6040_phy_read(ioaddr, lp->phy_addr, 4);
+- if (phy_dat & 0x140)
+- /* Force full duplex */
+- phy_dat = 0x8000;
+- else
+- phy_dat = 0;
+- } else {
+- /* Force Mode */
+- phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 0);
+- if (phy_dat & 0x100)
+- phy_dat = 0x8000;
+- else
+- phy_dat = 0x0000;
+- }
+-
+- return phy_dat;
+-};
+-
+-static void r6040_set_carrier(struct mii_if_info *mii)
+-{
+- if (r6040_phy_mode_chk(mii->dev)) {
+- /* autoneg is off: Link is always assumed to be up */
+- if (!netif_carrier_ok(mii->dev))
+- netif_carrier_on(mii->dev);
+- } else
+- r6040_phy_mode_chk(mii->dev);
+-}
+-
+ static int r6040_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+ struct r6040_private *lp = netdev_priv(dev);
+- struct mii_ioctl_data *data = if_mii(rq);
+- int rc;
+
+- if (!netif_running(dev))
++ if (!lp->phydev)
+ return -EINVAL;
+- spin_lock_irq(&lp->lock);
+- rc = generic_mii_ioctl(&lp->mii_if, data, cmd, NULL);
+- spin_unlock_irq(&lp->lock);
+- r6040_set_carrier(&lp->mii_if);
+- return rc;
++
++ return phy_mii_ioctl(lp->phydev, if_mii(rq), cmd);
+ }
+
+ static int r6040_rx(struct net_device *dev, int limit)
+@@ -752,26 +709,6 @@
+ if (ret)
+ return ret;
+
+- /* Read the PHY ID */
+- lp->switch_sig = r6040_phy_read(ioaddr, 0, 2);
+-
+- if (lp->switch_sig == ICPLUS_PHY_ID) {
+- r6040_phy_write(ioaddr, 29, 31, 0x175C); /* Enable registers */
+- lp->phy_mode = 0x8000;
+- } else {
+- /* PHY Mode Check */
+- r6040_phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
+- r6040_phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
+-
+- if (PHY_MODE == 0x3100)
+- lp->phy_mode = r6040_phy_mode_chk(dev);
+- else
+- lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
+- }
+-
+- /* Set duplex mode */
+- lp->mcr0 |= lp->phy_mode;
+-
+ /* improve performance (by RDC guys) */
+ r6040_phy_write(ioaddr, 30, 17, (r6040_phy_read(ioaddr, 30, 17) | 0x4000));
+ r6040_phy_write(ioaddr, 30, 17, ~((~r6040_phy_read(ioaddr, 30, 17)) | 0x2000));
+@@ -784,35 +721,6 @@
+ return 0;
+ }
+
+-/*
+- A periodic timer routine
+- Polling PHY Chip Link Status
+-*/
+-static void r6040_timer(unsigned long data)
+-{
+- struct net_device *dev = (struct net_device *)data;
+- struct r6040_private *lp = netdev_priv(dev);
+- void __iomem *ioaddr = lp->base;
+- u16 phy_mode;
+-
+- /* Polling PHY Chip Status */
+- if (PHY_MODE == 0x3100)
+- phy_mode = r6040_phy_mode_chk(dev);
+- else
+- phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
+-
+- if (phy_mode != lp->phy_mode) {
+- lp->phy_mode = phy_mode;
+- lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode;
+- iowrite16(lp->mcr0, ioaddr);
+- }
+-
+- /* Timer active again */
+- mod_timer(&lp->timer, round_jiffies(jiffies + HZ));
+-
+- /* Check media */
+- mii_check_media(&lp->mii_if, 1, 1);
+-}
+
+ /* Read/set MAC address routines */
+ static void r6040_mac_address(struct net_device *dev)
+@@ -874,10 +782,6 @@
+ napi_enable(&lp->napi);
+ netif_start_queue(dev);
+
+- /* set and active a timer process */
+- setup_timer(&lp->timer, r6040_timer, (unsigned long) dev);
+- if (lp->switch_sig != ICPLUS_PHY_ID)
+- mod_timer(&lp->timer, jiffies + HZ);
+ return 0;
+ }
+
+@@ -1020,40 +924,22 @@
+ static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct r6040_private *rp = netdev_priv(dev);
+- int rc;
+-
+- spin_lock_irq(&rp->lock);
+- rc = mii_ethtool_gset(&rp->mii_if, cmd);
+- spin_unlock_irq(&rp->lock);
+
+- return rc;
++ return phy_ethtool_gset(rp->phydev, cmd);
+ }
+
+ static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct r6040_private *rp = netdev_priv(dev);
+- int rc;
+-
+- spin_lock_irq(&rp->lock);
+- rc = mii_ethtool_sset(&rp->mii_if, cmd);
+- spin_unlock_irq(&rp->lock);
+- r6040_set_carrier(&rp->mii_if);
+-
+- return rc;
+-}
+-
+-static u32 netdev_get_link(struct net_device *dev)
+-{
+- struct r6040_private *rp = netdev_priv(dev);
+
+- return mii_link_ok(&rp->mii_if);
++ return phy_ethtool_sset(rp->phydev, cmd);
+ }
+
+ static const struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+ .get_settings = netdev_get_settings,
+ .set_settings = netdev_set_settings,
+- .get_link = netdev_get_link,
++ .get_link = ethtool_op_get_link,
+ };
+
+ static const struct net_device_ops r6040_netdev_ops = {
+@@ -1072,6 +958,86 @@
+ #endif
+ };
+
++static void r6040_adjust_link(struct net_device *dev)
++{
++ struct r6040_private *lp = netdev_priv(dev);
++ struct phy_device *phydev = lp->phydev;
++ int status_changed = 0;
++ void __iomem *ioaddr = lp->base;
++
++ BUG_ON (!phydev);
++
++ if (lp->old_link != phydev->link) {
++ status_changed = 1;
++ lp->old_link = phydev->link;
++ }
++
++ /* reflect duplex change */
++ if (phydev->link && (lp->old_duplex != phydev->duplex)) {
++ lp->mcr0 |= (phydev->duplex == DUPLEX_FULL ? 0x8000 : 0);
++ iowrite16(lp->mcr0, ioaddr);
++
++ status_changed = 1;
++ lp->old_duplex = phydev->duplex;
++ }
++
++ if (status_changed) {
++ pr_info("%s: link %s", dev->name, phydev->link ?
++ "UP" : "DOWN");
++ if (phydev->link)
++ pr_cont(" - %d/%s", phydev->speed,
++ DUPLEX_FULL == phydev->duplex ? "full" : "half");
++ pr_cont("\n");
++ }
++}
++
++static int r6040_mii_probe(struct net_device *dev)
++{
++ struct r6040_private *lp = netdev_priv(dev);
++ struct phy_device *phydev = NULL;
++ int phy_addr;
++
++ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
++ if (lp->mii_bus->phy_map[phy_addr]) {
++ phydev = lp->mii_bus->phy_map[phy_addr];
++ break;
++ }
++ }
++
++ if (!phydev) {
++ printk(KERN_ERR DRV_NAME "no PHY found\n");
++ return -ENODEV;
++ }
++
++ phydev = phy_connect(dev, dev_name(&phydev->dev), &r6040_adjust_link,
++ 0, PHY_INTERFACE_MODE_MII);
++
++ if (IS_ERR(phydev)) {
++ printk(KERN_ERR DRV_NAME "could not attach to PHY\n");
++ return PTR_ERR(phydev);
++ }
++
++ /* mask with MAC supported features */
++ phydev->supported &= (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_Autoneg
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++
++ phydev->advertising = phydev->supported;
++ lp->phydev = phydev;
++ lp->old_link = 0;
++ lp->old_duplex = -1;
++
++ printk(KERN_INFO "%s: attached PHY driver [%s] "
++ "(mii_bus:phy_addr=%s)\n", dev->name,
++ phydev->drv->name, dev_name(&phydev->dev));
++
++ return 0;
++}
++
+ static int __devinit r6040_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+ {
+@@ -1082,6 +1048,7 @@
+ static int card_idx = -1;
+ int bar = 0;
+ u16 *adrp;
++ int i;
+
+ printk("%s\n", version);
+
+@@ -1169,7 +1136,6 @@
+ /* Init RDC private data */
+ lp->mcr0 = 0x1002;
+ lp->phy_addr = phy_table[card_idx];
+- lp->switch_sig = 0;
+
+ /* The RDC-specific entries in the device structure. */
+ dev->netdev_ops = &r6040_netdev_ops;
+@@ -1177,28 +1143,61 @@
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ netif_napi_add(dev, &lp->napi, r6040_poll, 64);
+- lp->mii_if.dev = dev;
+- lp->mii_if.mdio_read = r6040_mdio_read;
+- lp->mii_if.mdio_write = r6040_mdio_write;
+- lp->mii_if.phy_id = lp->phy_addr;
+- lp->mii_if.phy_id_mask = 0x1f;
+- lp->mii_if.reg_num_mask = 0x1f;
++
++ lp->mii_bus = mdiobus_alloc();
++ if (!lp->mii_bus) {
++ printk(KERN_ERR DRV_NAME ": mdiobus_alloc failed\n");
++ goto err_out_unmap;
++ }
++
++ lp->mii_bus->priv = dev;
++ lp->mii_bus->read = r6040_mdiobus_read;
++ lp->mii_bus->write = r6040_mdiobus_write;
++ lp->mii_bus->reset = r6040_mdiobus_reset;
++ lp->mii_bus->name = "r6040_eth_mii";
++ snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "%x", card_idx);
++ lp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
++ if (!lp->mii_bus->irq) {
++ printk(KERN_ERR DRV_NAME ": allocation failed\n");
++ goto err_out_mdio;
++ }
++
++ for (i = 0; i < PHY_MAX_ADDR; i++)
++ lp->mii_bus->irq[i] = PHY_POLL;
++
++ err = mdiobus_register(lp->mii_bus);
++ if (err) {
++ printk(KERN_ERR DRV_NAME ": failed to register MII bus\n");
++ goto err_out_mdio_irq;
++ }
++
++ err = r6040_mii_probe(dev);
++ if (err) {
++ printk(KERN_ERR DRV_NAME ": failed to probe MII bus\n");
++ goto err_out_mdio_unregister;
++ }
+
+ /* Check the vendor ID on the PHY, if 0xffff assume none attached */
+ if (r6040_phy_read(ioaddr, lp->phy_addr, 2) == 0xffff) {
+ printk(KERN_ERR DRV_NAME ": Failed to detect an attached PHY\n");
+ err = -ENODEV;
+- goto err_out_unmap;
++ goto err_out_mdio_unregister;
+ }
+
+ /* Register net device. After this dev->name assign */
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR DRV_NAME ": Failed to register net device\n");
+- goto err_out_unmap;
++ goto err_out_mdio_unregister;
+ }
+ return 0;
+
++err_out_mdio_unregister:
++ mdiobus_unregister(lp->mii_bus);
++err_out_mdio_irq:
++ kfree(lp->mii_bus->irq);
++err_out_mdio:
++ mdiobus_free(lp->mii_bus);
+ err_out_unmap:
+ pci_iounmap(pdev, ioaddr);
+ err_out_free_res:
+@@ -1212,8 +1211,12 @@
+ static void __devexit r6040_remove_one(struct pci_dev *pdev)
+ {
+ struct net_device *dev = pci_get_drvdata(pdev);
++ struct r6040_private *lp = netdev_priv(dev);
+
+ unregister_netdev(dev);
++ mdiobus_unregister(lp->mii_bus);
++ kfree(lp->mii_bus->irq);
++ mdiobus_free(lp->mii_bus);
+ pci_release_regions(pdev);
+ free_netdev(dev);
+ pci_disable_device(pdev);
diff --git a/target/linux/rdc/profiles/ar525w.mk b/target/linux/rdc/profiles/ar525w.mk
index c2faee9da6..e86f47a49a 100644
--- a/target/linux/rdc/profiles/ar525w.mk
+++ b/target/linux/rdc/profiles/ar525w.mk
@@ -6,7 +6,7 @@
#
define Profile/ar525w
- NAME:=Airlink AR525W
- PACKAGES:=kmod-rt61-pci
+ NAME:=Airlink AR525W
+ PACKAGES:=kmod-rt61-pci kmod-switch-ip175c
endef
$(eval $(call Profile,ar525w))