aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-01-30 14:59:25 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-18 21:23:17 +0100
commit18c95c9d6ebea5cef1254ee917bff8aba993666d (patch)
tree866399a793a883012360d8bbd3f4fc695ada19be /target/linux
parentdc145de4be7b737bd7e37f4a79fc6e36833691b9 (diff)
downloadupstream-18c95c9d6ebea5cef1254ee917bff8aba993666d.tar.gz
upstream-18c95c9d6ebea5cef1254ee917bff8aba993666d.tar.bz2
upstream-18c95c9d6ebea5cef1254ee917bff8aba993666d.zip
ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2
This adds a pinmux to the shared DTSI for TP-Link TL-WR841N/ND v8, TL-WR842N v2 and TL-MR3420 v2. It is supposed to be the equivalent of: /* config gpio4 as normal gpio function */ ath79_gpio_output_select(TL_MR3420V2_GPIO_USB_POWER,AR934X_GPIO_OUT_GPIO); This allows to enable USB power on these devices. While at it, move the jtag_disable_pins to &gpio node and remove the redundant status=okay there. Tested on TP-Link TL-WR842N v2. Fixes: FS#2753 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Armin Fuerst <armin@fuerst.priv.at>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ath79/dts/ar9341_tplink.dtsi12
1 files changed, 8 insertions, 4 deletions
diff --git a/target/linux/ath79/dts/ar9341_tplink.dtsi b/target/linux/ath79/dts/ar9341_tplink.dtsi
index 0a950bd1a6..6bd7c3409b 100644
--- a/target/linux/ath79/dts/ar9341_tplink.dtsi
+++ b/target/linux/ath79/dts/ar9341_tplink.dtsi
@@ -18,9 +18,6 @@
keys: keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&jtag_disable_pins>;
-
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
@@ -85,7 +82,14 @@
};
&gpio {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &pmx_usb_power>;
+};
+
+&pinmux {
+ pmx_usb_power: usb_power {
+ pinctrl-single,bits = <0x4 0x0 0xff>;
+ };
};
&eth0 {