aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2013-08-01 14:30:53 +0000
committerJohn Crispin <john@openwrt.org>2013-08-01 14:30:53 +0000
commit23d3b705df405e36b07253f9d16f2fb7757f03f0 (patch)
tree881c9b7f84d81e8243c57dae99eab1ef1fd6ace4 /target/linux
parentaaedf6c8c612d0a561c91fd0f11631ff7e9576b1 (diff)
downloadupstream-23d3b705df405e36b07253f9d16f2fb7757f03f0.tar.gz
upstream-23d3b705df405e36b07253f9d16f2fb7757f03f0.tar.bz2
upstream-23d3b705df405e36b07253f9d16f2fb7757f03f0.zip
ramips: add Poray M3 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37636
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/02_network5
-rw-r--r--target/linux/ramips/base-files/lib/preinit/06_set_iface_mac5
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/M3.dts106
-rw-r--r--target/linux/ramips/image/Makefile3
-rw-r--r--target/linux/ramips/rt305x/profiles/poray.mk10
8 files changed, 136 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index f8e97875aa..a68538b2f7 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -52,6 +52,9 @@ get_status_led() {
hw550-3g)
status_led="hw550-3g:green:status"
;;
+ m3)
+ status_led="m3:blue:status"
+ ;;
mofi3500-3gn)
status_led="mofi3500-3gn:green:status"
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 6877588a45..307330b063 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -226,6 +226,11 @@ ramips_setup_macs()
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
+ m3)
+ lan_mac=$(mtd_get_mac_binary factory 4)
+ lan_mac=$(macaddr_add "$lan_mac" -1)
+ ;;
+
nbg-419n | \
wcr-150gn)
lan_mac=$(mtd_get_mac_binary factory 4)
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index aacec25fe3..86c19b0b81 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -75,6 +75,11 @@ preinit_set_mac_address() {
mac=$(mtd_get_mac_binary factory 40)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
+ m3)
+ mac=$(mtd_get_mac_binary factory 4)
+ mac=$(macaddr_add "$mac" -1)
+ ifconfig eth0 hw ether $mac 2>/dev/null
+ ;;
wl341v3)
mac=$(mtd_get_mac_binary board-nvram 65440)
ifconfig eth0 hw ether $mac 2>/dev/null
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index b1ecc8dfb9..7afa707363 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -148,6 +148,9 @@ ramips_board_detect() {
*"Planex MZK-W300NH2"*)
name="mzk-w300nh2"
;;
+ *"Poray M3")
+ name="m3"
+ ;;
*"PWH2004")
name="pwh2004"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 1d867a73f5..4ac86e97e0 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -44,6 +44,7 @@ platform_check_image() {
freestation5 | \
hw550-3g | \
hg255d | \
+ m3 | \
mofi3500-3gn | \
mpr-a1 | \
mpr-a2 | \
diff --git a/target/linux/ramips/dts/M3.dts b/target/linux/ramips/dts/M3.dts
new file mode 100644
index 0000000000..3e391b3d62
--- /dev/null
+++ b/target/linux/ramips/dts/M3.dts
@@ -0,0 +1,106 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "M3", "ralink,rt5350-soc";
+ model = "Poray M3";
+
+ palmbus@10000000 {
+ sysc@0 {
+ ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
+ ralink,gpiomux = "jtag";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q32";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q32";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ status = "okay";
+ };
+
+ esw@10110000 {
+ status = "okay";
+ ralink,portmap = <0x2f>;
+ ralink,led_polarity = <1>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ status {
+ label = "m3:blue:status";
+ gpios = <&gpio0 9 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+ mode {
+ label = "mode";
+ gpios = <&gpio0 17 1>;
+ linux,code = <0x100>;
+ linux,input-type = <5>;
+ };
+ };
+
+ wmac@10180000 {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 1a134e6ba2..b626bec7c4 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -374,6 +374,8 @@ Image/Build/Profile/RT-N13U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n13u,RT-
Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freestation5,FREESTATION5)
+Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
+
Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
# Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
@@ -508,6 +510,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/FREESTATION5,$(1))
# $(call Image/Build/Profile/HG255D,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
+ $(call Image/Build/Profile/M3,$(1))
$(call Image/Build/Profile/MOFI3500-3GN,$(1))
$(call Image/Build/Profile/MPRA2,$(1))
$(call Image/Build/Profile/MZKW300NH2,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/poray.mk b/target/linux/ramips/rt305x/profiles/poray.mk
index 2122ca1a80..972d7fdbd6 100644
--- a/target/linux/ramips/rt305x/profiles/poray.mk
+++ b/target/linux/ramips/rt305x/profiles/poray.mk
@@ -5,3 +5,13 @@
# See /LICENSE for more information.
#
+define Profile/M3
+ NAME:=Poray M3
+ PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer
+endef
+
+define Profile/M3/Description
+ Package set for Poray M3 board
+endef
+
+$(eval $(call Profile,M3))