aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorNuno Goncalves <nunojpg@gmail.com>2020-08-13 23:26:13 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-10-27 21:20:16 +0100
commit2a860bf4f4d5e76bd61235eeade834b6f8e2c9fa (patch)
tree01428f5852c97ba7fa511e877018ca834619c98d /target/linux
parent29804086ee7b740224d01012656162a9518deb97 (diff)
downloadupstream-2a860bf4f4d5e76bd61235eeade834b6f8e2c9fa.tar.gz
upstream-2a860bf4f4d5e76bd61235eeade834b6f8e2c9fa.tar.bz2
upstream-2a860bf4f4d5e76bd61235eeade834b6f8e2c9fa.zip
ramips: add support for Wavlink WL-WN530HG4
Same hardware as Phicomm K2G but different flash layout. Specification: - SoC: MediaTek MT7620A - Flash: 8 MB - RAM: 64 MB - Ethernet: 4 FE ports and 1 GE port (RTL8211F on port 5) - Wireless radio: MT7620 for 2.4G and MT7612E for 5G, both equipped with external PA. - UART: 1 x UART on PCB - 57600 8N1 Flash instruction: To avoid requiring UART for TFTP a dual flash procedure is suggested to install the squashfs image: 1. Rename openwrt-ramips-mt7620-wavlink_wl-wn530hg4-initramfs-kernel.bin to WN530HG4-WAVLINK. 2. Flash this file with the factory web interface. 3. With OpenWRT now running use standard sysupgrade to install the squashfs image. Signed-off-by: Nuno Goncalves <nunojpg@gmail.com> [remove dts-v1, remove model from LED labels, wrap commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ramips/dts/mt7620a_wavlink_wl-wn530hg4.dts138
-rw-r--r--target/linux/ramips/image/mt7620.mk9
-rwxr-xr-xtarget/linux/ramips/mt7620/base-files/etc/board.d/02_network6
3 files changed, 151 insertions, 2 deletions
diff --git a/target/linux/ramips/dts/mt7620a_wavlink_wl-wn530hg4.dts b/target/linux/ramips/dts/mt7620a_wavlink_wl-wn530hg4.dts
new file mode 100644
index 0000000000..d8ce40c8d1
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_wavlink_wl-wn530hg4.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "wavlink,wl-wn530hg4", "ralink,mt7620a-soc";
+ model = "Wavlink WL-WN530HG4";
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_blue;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_blue;
+ serial0 = &uartlite;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ status_yellow {
+ label = "yellow:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ status_red {
+ label = "red:status";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "uartf";
+ function = "gpio";
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii2_pins &mdio_pins>;
+
+ mtd-mac-address = <&factory 0x28>;
+
+ mediatek,portmap = "llllw";
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&wmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index d9725c9e69..dfdb5f28d3 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -1078,6 +1078,15 @@ define Device/vonets_var11n-300
endef
TARGET_DEVICES += vonets_var11n-300
+define Device/wavlink_wl-wn530hg4
+ SOC := mt7620a
+ IMAGE_SIZE := 7872k
+ DEVICE_VENDOR := Wavlink
+ DEVICE_MODEL := WL-WN530HG4
+ DEVICE_PACKAGES := kmod-mt76x2
+endef
+TARGET_DEVICES += wavlink_wl-wn530hg4
+
define Device/wrtnode_wrtnode
SOC := mt7620n
IMAGE_SIZE := 16064k
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index 3fdd42bbff..e884390c31 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -193,7 +193,8 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"4:lan" "0:wan" "6@eth0"
;;
- phicomm,k2g)
+ phicomm,k2g|\
+ wavlink,wl-wn530hg4)
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
;;
@@ -334,7 +335,8 @@ ramips_setup_macs()
lenovo,newifi-y1|\
lenovo,newifi-y1s|\
ohyeah,oy-0001|\
- phicomm,k2g)
+ phicomm,k2g|\
+ wavlink,wl-wn530hg4)
wan_mac=$(mtd_get_mac_binary factory 0x2e)
;;
linksys,e1700)