aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2019-03-25 15:15:57 +0100
committerHauke Mehrtens <hauke@hauke-m.de>2019-05-03 21:27:12 +0200
commit675832de79ec14ddc1183a66d1084aff7a856289 (patch)
tree652192f679f37ee14a99c97de71c4ce35fe1f697 /target/linux
parentcd3b29853380676bb7e51283050c2044048f8f85 (diff)
downloadupstream-675832de79ec14ddc1183a66d1084aff7a856289.tar.gz
upstream-675832de79ec14ddc1183a66d1084aff7a856289.tar.bz2
upstream-675832de79ec14ddc1183a66d1084aff7a856289.zip
xburst: Remove unmaintained target
This target only supports kernel 3.18, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/xburst/Makefile25
-rwxr-xr-xtarget/linux/xburst/base-files/etc/board.d/01_system12
-rw-r--r--target/linux/xburst/base-files/etc/config/fstab6
-rw-r--r--target/linux/xburst/base-files/etc/config/network13
-rw-r--r--target/linux/xburst/config-3.18346
-rw-r--r--target/linux/xburst/image/Makefile46
-rw-r--r--target/linux/xburst/image/ubinize.cfg14
-rw-r--r--target/linux/xburst/modules.mk40
-rw-r--r--target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch20
-rw-r--r--target/linux/xburst/patches-3.18/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch43
-rw-r--r--target/linux/xburst/patches-3.18/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch104
-rw-r--r--target/linux/xburst/patches-3.18/004-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch33
-rw-r--r--target/linux/xburst/patches-3.18/005-RTC-JZ4740-Init-the-regulator-register-on-startup.patch55
-rw-r--r--target/linux/xburst/patches-3.18/006-Add-ili8960-lcd-driver.patch309
-rw-r--r--target/linux/xburst/patches-3.18/007-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch21
-rw-r--r--target/linux/xburst/qi_lb60/config-default33
-rw-r--r--target/linux/xburst/qi_lb60/target.mk1
17 files changed, 0 insertions, 1121 deletions
diff --git a/target/linux/xburst/Makefile b/target/linux/xburst/Makefile
deleted file mode 100644
index 16d0b8b1b4..0000000000
--- a/target/linux/xburst/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# Copyright (C) 2009-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=mipsel
-BOARD:=xburst
-BOARDNAME:=Ingenic XBurst
-FEATURES:=targz nand ubifs audio source-only
-SUBTARGETS:=qi_lb60
-
-KERNEL_PATCHVER:=3.18
-
-DEVICE_TYPE:=other
-
-define Target/Description
- Build firmware images for XBurst JZ47x0 based boards.
-endef
-
-include $(INCLUDE_DIR)/target.mk
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/xburst/base-files/etc/board.d/01_system b/target/linux/xburst/base-files/etc/board.d/01_system
deleted file mode 100755
index 16f4987aae..0000000000
--- a/target/linux/xburst/base-files/etc/board.d/01_system
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-ucidef_set_hostname "BenNanoNote"
-ucidef_set_ntpserver
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/xburst/base-files/etc/config/fstab b/target/linux/xburst/base-files/etc/config/fstab
deleted file mode 100644
index 522356112f..0000000000
--- a/target/linux/xburst/base-files/etc/config/fstab
+++ /dev/null
@@ -1,6 +0,0 @@
-config mount
- option target /card
- option device /dev/mmcblk0p1
- option fstype auto
- option options rw,sync
- option enabled 1
diff --git a/target/linux/xburst/base-files/etc/config/network b/target/linux/xburst/base-files/etc/config/network
deleted file mode 100644
index a086003e32..0000000000
--- a/target/linux/xburst/base-files/etc/config/network
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-config interface loopback
- option ifname lo
- option proto static
- option ipaddr 127.0.0.1
- option netmask 255.0.0.0
-
-config interface lan
- option ifname usb0
- option proto static
- option ipaddr 192.168.1.1
- option netmask 255.255.255.0
diff --git a/target/linux/xburst/config-3.18 b/target/linux/xburst/config-3.18
deleted file mode 100644
index 099f5b0ed6..0000000000
--- a/target/linux/xburst/config-3.18
+++ /dev/null
@@ -1,346 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_BACKLIGHT_PWM is not set
-CONFIG_BATTERY_JZ4740=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CHARGER_GPIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_JZ4740=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_DW_DMAC_CORE is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_JZ4740=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FONTS=y
-# CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_6x10 is not set
-CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_SUN8x16 is not set
-CONFIG_FONT_SUPPORT=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MATRIXKMAP=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_PWM_BEEPER=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_JZ4740_QI_LB60=y
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_MATRIX=y
-# CONFIG_LCD_AMS369FG06 is not set
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_ILI8960=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=2
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_JZ4740=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_JZ4740_ADC=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_JZ4740=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_JZ4740=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NLS=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-CONFIG_NOP_USB_XCEIV=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PWM=y
-CONFIG_PWM_JZ4740=y
-CONFIG_PWM_SYSFS=y
-# CONFIG_RCU_BOOST is not set
-CONFIG_RCU_CPU_STALL_VERBOSE=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_DRV_JZ4740=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SND=y
-CONFIG_SND_COMPRESS_OFFLOAD=y
-CONFIG_SND_DMAENGINE_PCM=y
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_JACK=y
-CONFIG_SND_JZ4740_SOC=y
-CONFIG_SND_JZ4740_SOC_I2S=y
-CONFIG_SND_JZ4740_SOC_QI_LB60=y
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-CONFIG_SND_PCM=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_SOC=y
-# CONFIG_SND_SOC_FSL_SSI is not set
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-CONFIG_SND_SOC_JZ4740_CODEC=y
-CONFIG_SND_TIMER=y
-CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_STAGING is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_SYN_COOKIES is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB=y
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_COMMON=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_F_ECM=y
-CONFIG_USB_F_SUBSET=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_LIBCOMPOSITE=y
-# CONFIG_USB_MUSB_DUAL_ROLE is not set
-CONFIG_USB_MUSB_GADGET=y
-CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_JZ4740=y
-# CONFIG_USB_MUSB_TUSB6010 is not set
-# CONFIG_USB_MUSB_UX500 is not set
-CONFIG_USB_OTG_BLACKLIST_HUB=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_U_ETHER=y
-CONFIG_VFAT_FS=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_WATCHDOG is not set
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/xburst/image/Makefile b/target/linux/xburst/image/Makefile
deleted file mode 100644
index ff25fbebcc..0000000000
--- a/target/linux/xburst/image/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-JFFS2_BLOCKSIZE=256k 512k
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-ifneq ($(CONFIG_TARGET_xburst_qi_lb60),)
-UBI_OPTS = -m 4096 -p 512KiB
-UBIFS_OPTS = -m 4096 -e 516096 -c 4095
-else
-UBI_OPTS = -m 2048 -p 128KiB -s 512
-UBIFS_OPTS = -m 2048 -e 126KiB -c 4096
-endif
-
-UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage.bin
-
-define MkImageGzip
- gzip -9n -c $(1) > $(1).gz
- mkimage -A mips -O linux -T kernel -a 0x80010000 -C gzip \
- -e 0x80010000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
- -d $(1).gz $(2)
-endef
-
-define Image/Prepare
- $(call MkImageGzip,$(KDIR)/vmlinux,$(KDIR)/uimage)
-endef
-
-define Image/BuildKernel
- cp $(KDIR)/uimage $(UIMAGE)
-endef
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-endef
-
-define Image/Build
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
-endef
-
-$(eval $(call BuildImage))
diff --git a/target/linux/xburst/image/ubinize.cfg b/target/linux/xburst/image/ubinize.cfg
deleted file mode 100644
index 49d55b9840..0000000000
--- a/target/linux/xburst/image/ubinize.cfg
+++ /dev/null
@@ -1,14 +0,0 @@
-[rootfs]
-# Volume mode (other option is static)
-mode=ubi
-# Source image
-image=root.ubifs
-# Volume ID in UBI image
-vol_id=0
-# Allow for dynamic resize
-vol_type=dynamic
-# Volume name
-vol_name=rootfs
-# Autoresize volume at first mount
-vol_flags=autoresize
-
diff --git a/target/linux/xburst/modules.mk b/target/linux/xburst/modules.mk
deleted file mode 100644
index 95cebdad6a..0000000000
--- a/target/linux/xburst/modules.mk
+++ /dev/null
@@ -1,40 +0,0 @@
-
-
-SOUND_MENU:=Sound Support
-
-define KernelPackage/sound-soc-jz4740
- SUBMENU:=$(SOUND_MENU)
- DEPENDS:=kmod-sound-soc-core @TARGET_xburst @BROKEN
- TITLE:=JZ4740 SoC sound support
- KCONFIG:=CONFIG_SND_JZ4740_SOC CONFIG_SND_JZ4740_SOC_I2S
- FILES:= \
- $(LINUX_DIR)/sound/soc/jz4740/snd-soc-jz4740.ko \
- $(LINUX_DIR)/sound/soc/jz4740/snd-soc-jz4740-i2s.ko
- AUTOLOAD:=$(call AutoLoad,60,snd-soc-jz4740 snd-soc-jz4740-i2s)
-endef
-
-define KernelPackage/sound-soc-jz4740-codec
- SUBMENU:=$(SOUND_MENU)
- DEPENDS:=kmod-sound-soc-core @TARGET_xburst @BROKEN
- TITLE:=JZ4740 SoC internal codec support
- KCONFIG:=CONFIG_SND_SOC_JZ4740_CODEC
- FILES:=$(LINUX_DIR)/sound/soc/codecs/snd-soc-jz4740-codec.ko
- AUTOLOAD:=$(call AutoLoad,60,snd-soc-jz4740-codec)
-endef
-
-define KernelPackage/sound-soc-xburst/default
- SUBMENU:=$(SOUND_MENU)
- DEPENDS:=kmod-sound-soc-jz4740 kmod-sound-soc-jz4740-codec @TARGET_xburst_$(if $(4),$(4),$(3)) @BROKEN
- TITLE:=$(1) sound support
- KCONFIG:=CONFIG_SND_JZ4740_SOC_$(2)
- FILES:=$(LINUX_DIR)/sound/soc/jz4740/snd-soc-$(3).ko
- AUTOLOAD:=$(call AutoLoad,65,snd-soc-$(3))
-endef
-
-define KernelPackage/sound-soc-qilb60
-$(call KernelPackage/sound-soc-xburst/default,QI NanoNote,QI_LB60,qi-lb60,qi_lb60)
-endef
-
-$(eval $(call KernelPackage,sound-soc-jz4740))
-$(eval $(call KernelPackage,sound-soc-jz4740-codec))
-$(eval $(call KernelPackage,sound-soc-qilb60))
diff --git a/target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch b/target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
deleted file mode 100644
index 93851d7283..0000000000
--- a/target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From b0eb5175e0de3e5134a36a7da382d8811562af12 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Tue, 15 Mar 2011 12:49:15 +0100
-Subject: [PATCH 1/7] ubi: Read only the vid header instead of the whole page
-
----
- drivers/mtd/ubi/io.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -1014,7 +1014,7 @@ int ubi_io_read_vid_hdr(struct ubi_devic
-
- p = (char *)vid_hdr - ubi->vid_hdr_shift;
- read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
-- ubi->vid_hdr_alsize);
-+ UBI_VID_HDR_SIZE + ubi->vid_hdr_shift);
- if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
- return read_err;
-
diff --git a/target/linux/xburst/patches-3.18/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch b/target/linux/xburst/patches-3.18/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
deleted file mode 100644
index ce87452a16..0000000000
--- a/target/linux/xburst/patches-3.18/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 98d33db1c87e2447b9b203399d2f995e05ecdb52 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Sat, 26 Feb 2011 15:30:07 +0100
-Subject: [PATCH 2/7] NAND: Optimize NAND_ECC_HW_OOB_FIRST read
-
-Avoid sending unnecessary READ commands to the chip.
----
- drivers/mtd/nand/nand_base.c | 17 +++++++++++++----
- 1 file changed, 13 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -1365,9 +1365,16 @@ static int nand_read_page_hwecc_oob_firs
- unsigned int max_bitflips = 0;
-
- /* Read the OOB area first */
-- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-+ /* Read the OOB area first */
-+ if (mtd->writesize > 512) {
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1);
-+ } else {
-+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-+ }
-
- for (i = 0; i < chip->ecc.total; i++)
- ecc_code[i] = chip->oob_poi[eccpos[i]];
-@@ -1580,7 +1587,9 @@ static int nand_do_read_ops(struct mtd_i
- __func__, buf);
-
- read_retry:
-- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
-+ if (chip->ecc.mode != NAND_ECC_HW_OOB_FIRST) {
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
-+ }
-
- /*
- * Now read the page into the buffer. Absent an error,
diff --git a/target/linux/xburst/patches-3.18/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch b/target/linux/xburst/patches-3.18/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
deleted file mode 100644
index 65e739d479..0000000000
--- a/target/linux/xburst/patches-3.18/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From 6031a240816d1c9a10f596d0648e586f6b878809 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Tue, 15 Mar 2011 12:33:41 +0100
-Subject: [PATCH 3/7] NAND: Add support for subpage reads for
- NAND_ECC_HW_OOB_FIRST
-
----
- drivers/mtd/nand/nand_base.c | 77 +++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 76 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -1398,6 +1398,75 @@ static int nand_read_page_hwecc_oob_firs
- }
-
- /**
-+ * nand_read_subpage_hwecc_oob_first - [REPLACABLE] hw ecc based sub-page read function
-+ * @mtd: mtd info structure
-+ * @chip: nand chip info structure
-+ * @data_offs: offset of requested data within the page
-+ * @readlen: data length
-+ * @bufpoi: buffer to store read data
-+ * @page: page number to read
-+ *
-+ * Hardware ECC for large page chips, require OOB to be read first.
-+ * For this ECC mode, the write_page method is re-used from ECC_HW.
-+ * These methods read/write ECC from the OOB area, unlike the
-+ * ECC_HW_SYNDROME support with multiple ECC steps, follows the
-+ * "infix ECC" scheme and reads/writes ECC from the data area, by
-+ * overwriting the NAND manufacturer bad block markings.
-+ */
-+static int nand_read_subpage_hwecc_oob_first(struct mtd_info *mtd, struct nand_chip *chip,
-+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, int page)
-+{
-+ int start_step, end_step, num_steps;
-+ uint32_t *eccpos = chip->ecc.layout->eccpos;
-+ uint8_t *p;
-+ int data_col_addr;
-+ int eccsize = chip->ecc.size;
-+ int eccbytes = chip->ecc.bytes;
-+ uint8_t *ecc_code = chip->buffers->ecccode;
-+ uint8_t *ecc_calc = chip->buffers->ecccalc;
-+ int i;
-+
-+ /* Column address wihin the page aligned to ECC size */
-+ start_step = data_offs / chip->ecc.size;
-+ end_step = (data_offs + readlen - 1) / chip->ecc.size;
-+ num_steps = end_step - start_step + 1;
-+
-+ data_col_addr = start_step * chip->ecc.size;
-+
-+ /* Read the OOB area first */
-+ if (mtd->writesize > 512) {
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
-+ } else {
-+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, data_col_addr, page);
-+ }
-+
-+ for (i = 0; i < chip->ecc.total; i++)
-+ ecc_code[i] = chip->oob_poi[eccpos[i]];
-+
-+ p = bufpoi + data_col_addr;
-+
-+ for (i = eccbytes * start_step; num_steps; num_steps--, i += eccbytes, p += eccsize) {
-+ int stat;
-+
-+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
-+ chip->read_buf(mtd, p, eccsize);
-+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
-+
-+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
-+ if (stat < 0)
-+ mtd->ecc_stats.failed++;
-+ else
-+ mtd->ecc_stats.corrected += stat;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
- * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
- * @mtd: mtd info structure
- * @chip: nand chip info structure
-@@ -3961,8 +4030,14 @@ int nand_scan_tail(struct mtd_info *mtd)
- pr_warn("No ECC functions supplied; hardware ECC not possible\n");
- BUG();
- }
-- if (!ecc->read_page)
-+
-+ if (!ecc->read_page) {
- ecc->read_page = nand_read_page_hwecc_oob_first;
-+ if (!ecc->read_subpage) {
-+ ecc->read_subpage = nand_read_subpage_hwecc_oob_first;
-+ chip->options |= NAND_SUBPAGE_READ;
-+ }
-+ }
-
- case NAND_ECC_HW:
- /* Use standard hwecc read page function? */
diff --git a/target/linux/xburst/patches-3.18/004-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch b/target/linux/xburst/patches-3.18/004-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch
deleted file mode 100644
index f2c26ade09..0000000000
--- a/target/linux/xburst/patches-3.18/004-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 1a1095927d224403af8ad57c354cc64521bf3081 Mon Sep 17 00:00:00 2001
-From: Paul Cercueil <paul@crapouillou.net>
-Date: Sat, 16 Jun 2012 19:36:31 +0200
-Subject: [PATCH 4/7] ASoC: JZ4740: delay activation of the DAC to work around
- a sound bug.
-
-A proper fix of that bug would require a big rewrite of the driver,
-which (I hope) will be done eventually.
----
- sound/soc/codecs/jz4740.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/sound/soc/codecs/jz4740.c
-+++ b/sound/soc/codecs/jz4740.c
-@@ -249,12 +249,15 @@ static int jz4740_codec_set_bias_level(s
- case SND_SOC_BIAS_ON:
- break;
- case SND_SOC_BIAS_PREPARE:
-- mask = JZ4740_CODEC_1_VREF_DISABLE |
-- JZ4740_CODEC_1_VREF_AMP_DISABLE |
-- JZ4740_CODEC_1_HEADPHONE_POWERDOWN_M;
-+ mask = JZ4740_CODEC_1_HEADPHONE_POWERDOWN_M;
- value = 0;
-
- regmap_update_bits(regmap, JZ4740_REG_CODEC_1, mask, value);
-+
-+ msleep(500);
-+ mask = JZ4740_CODEC_1_VREF_DISABLE |
-+ JZ4740_CODEC_1_VREF_AMP_DISABLE;
-+ regmap_update_bits(regmap, JZ4740_REG_CODEC_1, mask, 0);
- break;
- case SND_SOC_BIAS_STANDBY:
- /* The only way to clear the suspend flag is to reset the codec */
diff --git a/target/linux/xburst/patches-3.18/005-RTC-JZ4740-Init-the-regulator-register-on-startup.patch b/target/linux/xburst/patches-3.18/005-RTC-JZ4740-Init-the-regulator-register-on-startup.patch
deleted file mode 100644
index f38483ab5c..0000000000
--- a/target/linux/xburst/patches-3.18/005-RTC-JZ4740-Init-the-regulator-register-on-startup.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From f05b1ecd7e4fde7e69320a4b7be461636e982991 Mon Sep 17 00:00:00 2001
-From: Paul Cercueil <paul@crapouillou.net>
-Date: Thu, 13 Sep 2012 00:09:20 +0200
-Subject: [PATCH 5/7] RTC: JZ4740: Init the "regulator" register on startup.
-
-This register controls the accuracy of the RTC. uC/OS-II use
-the RTC as a 100Hz clock, and writes a completely wrong value
-on that register, that we have to overwrite if we want a working
-real-time clock.
-
-Signed-off-by: Paul Cercueil <paul@crapouillou.net>
----
- drivers/rtc/rtc-jz4740.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/drivers/rtc/rtc-jz4740.c
-+++ b/drivers/rtc/rtc-jz4740.c
-@@ -15,6 +15,7 @@
- */
-
- #include <linux/io.h>
-+#include <linux/clk.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/platform_device.h>
-@@ -216,6 +217,7 @@ static int jz4740_rtc_probe(struct platf
- struct jz4740_rtc *rtc;
- uint32_t scratchpad;
- struct resource *mem;
-+ struct clk *rtc_clk;
-
- rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
- if (!rtc)
-@@ -263,6 +265,21 @@ static int jz4740_rtc_probe(struct platf
- }
- }
-
-+ rtc_clk = clk_get(&pdev->dev, "rtc");
-+ if (IS_ERR(rtc_clk)) {
-+ dev_err(&pdev->dev, "Failed to get RTC clock\n");
-+ return PTR_ERR(rtc_clk);
-+ }
-+
-+ /* TODO: initialize the ADJC bits (25:16) to fine-tune
-+ * the accuracy of the RTC */
-+ ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_REGULATOR,
-+ (clk_get_rate(rtc_clk) - 1) & 0xffff);
-+ clk_put(rtc_clk);
-+
-+ if (ret)
-+ dev_warn(&pdev->dev, "Could not update RTC regulator register\n");
-+
- return 0;
- }
-
diff --git a/target/linux/xburst/patches-3.18/006-Add-ili8960-lcd-driver.patch b/target/linux/xburst/patches-3.18/006-Add-ili8960-lcd-driver.patch
deleted file mode 100644
index dc12d93409..0000000000
--- a/target/linux/xburst/patches-3.18/006-Add-ili8960-lcd-driver.patch
+++ /dev/null
@@ -1,309 +0,0 @@
-From 8741ead92bc93e66740237e51b88b8690ebcbba3 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Sun, 1 Aug 2010 21:19:40 +0200
-Subject: [PATCH 6/7] Add ili8960 lcd driver
-
-Includes the following changes from the jz-3.5 branch:
-- Use module_spi_driver
-- Use devm_kzalloc
-- Use kstrtoul
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
----
- drivers/video/backlight/Kconfig | 7 +
- drivers/video/backlight/Makefile | 1 +
- drivers/video/backlight/ili8960.c | 262 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 270 insertions(+)
- create mode 100644 drivers/video/backlight/ili8960.c
-
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -59,6 +59,13 @@ config LCD_LTV350QV
-
- The LTV350QV panel is present on all ATSTK1000 boards.
-
-+config LCD_ILI8960
-+ tristate "Ilitek ili8960 LCD driver"
-+ depends on LCD_CLASS_DEVICE && SPI
-+ default n
-+ help
-+ Driver for the Ilitek ili8960 LCD controller chip.
-+
- config LCD_ILI922X
- tristate "ILI Technology ILI9221/ILI9222 support"
- depends on SPI
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
- obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o
- obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o
- obj-$(CONFIG_LCD_HX8357) += hx8357.o
-+obj-$(CONFIG_LCD_ILI8960) += ili8960.o
- obj-$(CONFIG_LCD_ILI922X) += ili922x.o
- obj-$(CONFIG_LCD_ILI9320) += ili9320.o
- obj-$(CONFIG_LCD_L4F00242T03) += l4f00242t03.o
---- /dev/null
-+++ b/drivers/video/backlight/ili8960.c
-@@ -0,0 +1,262 @@
-+/*
-+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
-+ * Driver for Ilitek ili8960 LCD
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/spi/spi.h>
-+#include <linux/lcd.h>
-+#include <linux/delay.h>
-+
-+struct ili8960 {
-+ struct spi_device *spi;
-+ struct lcd_device *lcd;
-+ bool enabled;
-+ unsigned int brightness;
-+};
-+
-+#define ILI8960_REG_BRIGHTNESS 0x03
-+#define ILI8960_REG_POWER 0x05
-+#define ILI8960_REG_CONTRAST 0x0d
-+
-+static int ili8960_write_reg(struct spi_device *spi, uint8_t reg,
-+ uint8_t data)
-+{
-+ uint8_t buf[2];
-+ buf[0] = ((reg & 0x40) << 1) | (reg & 0x3f);
-+ buf[1] = data;
-+
-+ return spi_write(spi, buf, sizeof(buf));
-+}
-+
-+static int ili8960_programm_power(struct spi_device *spi, bool enabled)
-+{
-+ int ret;
-+
-+ if (enabled)
-+ mdelay(20);
-+
-+ ret = ili8960_write_reg(spi, ILI8960_REG_POWER, enabled ? 0xc7 : 0xc6);
-+
-+ if (!enabled)
-+ mdelay(20);
-+
-+ return ret;
-+}
-+
-+static int ili8960_set_power(struct lcd_device *lcd, int power)
-+{
-+ struct ili8960 *ili8960 = lcd_get_data(lcd);
-+
-+ switch (power) {
-+ case FB_BLANK_UNBLANK:
-+ ili8960->enabled = true;
-+ break;
-+ default:
-+ return 0;
-+ }
-+
-+ return ili8960_programm_power(ili8960->spi, ili8960->enabled);
-+}
-+
-+static int ili8960_early_set_power(struct lcd_device *lcd, int power)
-+{
-+ struct ili8960 *ili8960 = lcd_get_data(lcd);
-+
-+ switch (power) {
-+ case FB_BLANK_UNBLANK:
-+ return 0;
-+ default:
-+ ili8960->enabled = false;
-+ break;
-+ }
-+
-+ return ili8960_programm_power(ili8960->spi, ili8960->enabled);
-+}
-+
-+static int ili8960_get_power(struct lcd_device *lcd)
-+{
-+ struct ili8960 *ili8960 = lcd_get_data(lcd);
-+ return ili8960->enabled ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
-+}
-+
-+static int ili8960_set_contrast(struct lcd_device *lcd, int contrast)
-+{
-+ struct ili8960 *ili8960 = lcd_get_data(lcd);
-+
-+ return ili8960_write_reg(ili8960->spi, ILI8960_REG_CONTRAST, contrast);
-+}
-+
-+static int ili8960_set_mode(struct lcd_device *lcd, struct fb_videomode *mode)
-+{
-+ if (mode->xres != 320 && mode->yres != 240)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static int ili8960_set_brightness(struct ili8960 *ili8960, int brightness)
-+{
-+ int ret;
-+
-+ ret = ili8960_write_reg(ili8960->spi, ILI8960_REG_BRIGHTNESS, brightness);
-+
-+ if (ret == 0)
-+ ili8960->brightness = brightness;
-+
-+ return ret;
-+}
-+
-+static ssize_t ili8960_show_brightness(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct lcd_device *ld = to_lcd_device(dev);
-+ struct ili8960 *ili8960 = lcd_get_data(ld);
-+
-+ return sprintf(buf, "%u\n", ili8960->brightness);
-+}
-+
-+static ssize_t ili8960_store_brightness(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t count)
-+{
-+ struct lcd_device *ld = to_lcd_device(dev);
-+ struct ili8960 *ili8960 = lcd_get_data(ld);
-+ unsigned long brightness;
-+ int ret;
-+
-+ ret = kstrtoul(buf, 0, &brightness);
-+ if (ret)
-+ return ret;
-+
-+ if (brightness > 255)
-+ return -EINVAL;
-+
-+ ili8960_set_brightness(ili8960, brightness);
-+
-+ return count;
-+}
-+
-+
-+static DEVICE_ATTR(brightness, 0644, ili8960_show_brightness,
-+ ili8960_store_brightness);
-+
-+static struct lcd_ops ili8960_lcd_ops = {
-+ .set_power = ili8960_set_power,
-+ .early_set_power = ili8960_early_set_power,
-+ .get_power = ili8960_get_power,
-+ .set_contrast = ili8960_set_contrast,
-+ .set_mode = ili8960_set_mode,
-+};
-+
-+static int ili8960_probe(struct spi_device *spi)
-+{
-+ int ret;
-+ struct ili8960 *ili8960;
-+
-+ ili8960 = devm_kzalloc(&spi->dev, sizeof(*ili8960), GFP_KERNEL);
-+ if (!ili8960)
-+ return -ENOMEM;
-+
-+ spi->bits_per_word = 8;
-+ spi->mode = SPI_MODE_3;
-+
-+ ret = spi_setup(spi);
-+ if (ret) {
-+ dev_err(&spi->dev, "Failed to setup spi\n");
-+ return ret;
-+ }
-+
-+ ili8960->spi = spi;
-+
-+ ili8960->lcd = lcd_device_register("ili8960-lcd", &spi->dev, ili8960,
-+ &ili8960_lcd_ops);
-+
-+ if (IS_ERR(ili8960->lcd)) {
-+ ret = PTR_ERR(ili8960->lcd);
-+ dev_err(&spi->dev, "Failed to register lcd device: %d\n", ret);
-+ return ret;
-+ }
-+
-+ ili8960->lcd->props.max_contrast = 255;
-+
-+ ret = device_create_file(&ili8960->lcd->dev, &dev_attr_brightness);
-+ if (ret)
-+ goto err_unregister_lcd;
-+
-+ ili8960_programm_power(ili8960->spi, true);
-+ ili8960->enabled = true;
-+
-+ spi_set_drvdata(spi, ili8960);
-+
-+ ili8960_write_reg(spi, 0x13, 0x01);
-+
-+ return 0;
-+err_unregister_lcd:
-+ lcd_device_unregister(ili8960->lcd);
-+ return ret;
-+}
-+
-+static int ili8960_remove(struct spi_device *spi)
-+{
-+ struct ili8960 *ili8960 = spi_get_drvdata(spi);
-+
-+ device_remove_file(&ili8960->lcd->dev, &dev_attr_brightness);
-+ lcd_device_unregister(ili8960->lcd);
-+
-+ spi_set_drvdata(spi, NULL);
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ili8960_suspend(struct spi_device *spi, pm_message_t state)
-+{
-+ struct ili8960 *ili8960 = spi_get_drvdata(spi);
-+
-+ if (ili8960->enabled)
-+ ili8960_programm_power(ili8960->spi, false);
-+
-+ return 0;
-+}
-+
-+static int ili8960_resume(struct spi_device *spi)
-+{
-+ struct ili8960 *ili8960 = spi_get_drvdata(spi);
-+
-+ if (ili8960->enabled)
-+ ili8960_programm_power(ili8960->spi, true);
-+
-+ return 0;
-+}
-+
-+#else
-+#define ili8960_suspend NULL
-+#define ili8960_resume NULL
-+#endif
-+
-+static struct spi_driver ili8960_driver = {
-+ .driver = {
-+ .name = "ili8960",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = ili8960_probe,
-+ .remove = ili8960_remove,
-+ .suspend = ili8960_suspend,
-+ .resume = ili8960_resume,
-+};
-+module_spi_driver(ili8960_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("LCD driver for Ilitek ili8960");
-+MODULE_ALIAS("spi:ili8960");
diff --git a/target/linux/xburst/patches-3.18/007-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch b/target/linux/xburst/patches-3.18/007-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
deleted file mode 100644
index fd89ad3bca..0000000000
--- a/target/linux/xburst/patches-3.18/007-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 4371d60ae342c76708c4317e06fb7dcf0159c2f1 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Wed, 13 Oct 2010 01:17:24 +0200
-Subject: [PATCH 7/7] qi_lb60: Don't use 3-wire spi mode for the display for
- now
-
-The spi_gpio driver does not support 3-wire mode.
----
- arch/mips/jz4740/board-qi_lb60.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/mips/jz4740/board-qi_lb60.c
-+++ b/arch/mips/jz4740/board-qi_lb60.c
-@@ -313,7 +313,6 @@ static struct spi_board_info qi_lb60_spi
- .chip_select = 0,
- .bus_num = 1,
- .max_speed_hz = 30 * 1000,
-- .mode = SPI_3WIRE,
- },
- };
-
diff --git a/target/linux/xburst/qi_lb60/config-default b/target/linux/xburst/qi_lb60/config-default
deleted file mode 100644
index 1fd421b5fc..0000000000
--- a/target/linux/xburst/qi_lb60/config-default
+++ /dev/null
@@ -1,33 +0,0 @@
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_INPUT_MATRIXKMAP=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_MATRIX=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_ILI8960=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_REGMAP_SPI=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-CONFIG_SND_SEQ_DUMMY=y
-# CONFIG_SND_VIRMIDI is not set
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-# CONFIG_USB_FUSB300 is not set
-CONFIG_USB_JZ4740=y
diff --git a/target/linux/xburst/qi_lb60/target.mk b/target/linux/xburst/qi_lb60/target.mk
deleted file mode 100644
index 8ae71bd9cb..0000000000
--- a/target/linux/xburst/qi_lb60/target.mk
+++ /dev/null
@@ -1 +0,0 @@
-BOARDNAME:=QI Ben Nanonote (qi_lb60)