aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorTobias Welz <tw@wiznet.eu>2019-01-12 00:37:43 +0100
committerPetr Štetiar <ynezz@true.cz>2019-03-29 07:33:59 +0000
commit7c4b85ee278576816b0f9d20e48fa696f8793fdf (patch)
tree4bfd2cbb03c6866948cb179f48f56d4c093805e3 /target/linux
parentb0395cfc5625328ad824c605bad89f1ae0781e3e (diff)
downloadupstream-7c4b85ee278576816b0f9d20e48fa696f8793fdf.tar.gz
upstream-7c4b85ee278576816b0f9d20e48fa696f8793fdf.tar.bz2
upstream-7c4b85ee278576816b0f9d20e48fa696f8793fdf.zip
ramips: add support for WIZnet WizFi630S board
The WIZnet WizFi630S board is in the miniPCIe form factor. SoC: Mediatek MT7688AN RAM: 128MB Flash: 32Mb WiFi: 2.4GHz Ethernet: 3x 100Mbit USB: 1 (USB 2.0) serial ports: 2 (1x full, 1xlite) Flash and recovery instructions: Use the factory installed u-boot boot loader. It is available on UART2 (115200,8,n,1). Then get the sysupgrade image from a tftp server. Signed-off-by: Tobias Welz <tw@wiznet.eu> [whitespace and device name in makefile fixes] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ramips/dts/WIZFI630S.dts193
-rw-r--r--target/linux/ramips/image/mt76x8.mk7
3 files changed, 204 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index bb5ff483c4..9f656199a8 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -429,6 +429,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:wan" "6@eth0"
;;
+ wiznet,wizfi630s)
+ ucidef_add_switch "switch0" \
+ "0:wan" "3:lan" "4:lan" "6@eth0"
+ ;;
wt3020-4M|\
wt3020-8M)
ucidef_add_switch "switch0" \
diff --git a/target/linux/ramips/dts/WIZFI630S.dts b/target/linux/ramips/dts/WIZFI630S.dts
new file mode 100644
index 0000000000..13c8f68f15
--- /dev/null
+++ b/target/linux/ramips/dts/WIZFI630S.dts
@@ -0,0 +1,193 @@
+//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc";
+ model = "WIZnet WizFi630S";
+
+ chosen {
+ bootargs = "console=ttyS1,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ aliases {
+ led-boot = &led_run;
+ led-failsafe = &led_run;
+ led-running = &led_run;
+ led-upgrade = &led_run;
+ serial0 = &uart1;
+ serial1 = &uartlite;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_run: run {
+ label = "wizfi630s:green:run";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+
+ ledwps {
+ label = "wizfi630s:green:wps";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ leduart1 {
+ label = "wizfi630s:green:uart1";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ leduart2 {
+ label = "wizfi630s:green:uart2";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ scm1 {
+ label = "SCM1";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+
+ scm2 {
+ label = "SCM2";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_2>;
+ };
+
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio";
+ ralink,function = "gpio";
+ };
+
+ i2s {
+ ralink,group = "i2s";
+ ralink,function = "gpio";
+ };
+
+ wdt {
+ ralink,group = "wdt";
+ ralink,function = "gpio";
+ };
+
+
+ i2c {
+ ralink,group = "i2c";
+ ralink,function = "gpio";
+ };
+
+ refclk {
+ ralink,group = "refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ m25p,chunked-io = <31>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&sdhci {
+ status = "okay";
+ mediatek,cd-high;
+};
+
+&wmac {
+ status = "okay";
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index 414798d08c..cb8f181955 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -408,6 +408,13 @@ define Device/widora_neo-32m
endef
TARGET_DEVICES += widora_neo-32m
+define Device/wiznet_wizfi630s
+ DTS := WIZFI630S
+ IMAGE_SIZE := $(ralink_default_fw_size_32M)
+ DEVICE_TITLE := WIZnet WizFi630S
+endef
+TARGET_DEVICES += wiznet_wizfi630s
+
define Device/wrtnode2p
DTS := WRTNODE2P
IMAGE_SIZE := $(ralink_default_fw_size_16M)