aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorThibaut VARÈNE <hacks@slashdirt.org>2020-03-17 17:53:43 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-03-27 17:12:46 +0100
commit9a122df07e82224f1fd0588559ded6ce4cf6a9e5 (patch)
tree7bfa621c2724c6987df7391e297ea91446995274 /target/linux
parent43105f24eb50c2fa3bbadd3225beeb5f1981f6bb (diff)
downloadupstream-9a122df07e82224f1fd0588559ded6ce4cf6a9e5.tar.gz
upstream-9a122df07e82224f1fd0588559ded6ce4cf6a9e5.tar.bz2
upstream-9a122df07e82224f1fd0588559ded6ce4cf6a9e5.zip
ath79: fix Mikrotik wAP G-5HacT2HnD mtd partitions
In RouterBOARD parlance there never was an "art" partition. This partition has always been named 'hard_config' on ar71xx. This partition contains more than just ART (Atheros Radio Test) data. It includes the hardware description (product code, serial, board identifier, name, hardware options, MAC address), as well as other bits affecting the operation of RouterBoot. To avoid confusion with regular ART data, this partition is renamed in line with historical ar71xx and ramips nomenclature as 'hard_config'. This commit fixes the previous support files and implements the nested RouterBoot partition scheme as already used by ramips-based SPI-NOR RouterBOARD DTSes, as previously reviewed and implemented in bbe2cf657ca7 ("ramips: fix RBM11G partitioning"). Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts61
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom4
-rw-r--r--target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata2
3 files changed, 38 insertions, 29 deletions
diff --git a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
index 015bd2efe5..5fd4623726 100644
--- a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
+++ b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
@@ -53,7 +53,7 @@
&eth1 {
status = "okay";
- mtd-mac-address = <&art 0x10>;
+ mtd-mac-address = <&hard_config 0x10>;
pll-data = <0x03000101 0x80000101 0x80001313>;
phy-handle = <&phy0>;
@@ -81,32 +81,41 @@
#size-cells = <1>;
partition@0 {
- label = "routerboot";
- reg = <0x000000 0x00e000>;
+ label = "RouterBoot";
+ reg = <0x0 0x20000>;
read-only;
- };
-
- art: partition@e000 {
- label = "art";
- reg = <0x000e000 0x001000>;
- read-only;
- };
-
- partition@f000 {
- label = "bios";
- reg = <0x000f000 0x001000>;
- read-only;
- };
-
- partition@10000 {
- label = "routerboot2";
- reg = <0x010000 0x00f000>;
- read-only;
- };
-
- partition@1f000 {
- label = "soft_config";
- reg = <0x001f000 0x001000>;
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader1";
+ reg = <0x0 0xe000>;
+ read-only;
+ };
+
+ hard_config: partition@e000 {
+ label = "hard_config";
+ reg = <0xe000 0x1000>;
+ read-only;
+ };
+
+ partition@f000 {
+ label = "bios";
+ reg = <0xf000 0x1000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "bootloader2";
+ reg = <0x10000 0xf000>;
+ read-only;
+ };
+
+ partition@1f000 {
+ label = "soft_config";
+ reg = <0x1f000 0x1000>;
+ };
};
partition@20000 {
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index f5f88484b5..86995de890 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -11,8 +11,8 @@ case "$FIRMWARE" in
"ath9k-eeprom-ahb-18100000.wmac.bin")
case $board in
mikrotik,routerboard-wap-g-5hact2hnd)
- mikrotik_caldata_extract "art" 0x1000 0x440
- ath9k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x10) +2)
+ mikrotik_caldata_extract "hard_config" 0x1000 0x440
+ ath9k_patch_mac $(macaddr_add $(mtd_get_mac_binary hard_config 0x10) +2)
;;
*)
caldata_die "board $board is not supported yet"
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 6eb9a93b75..7773eb1e3a 100644
--- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -11,7 +11,7 @@ case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
mikrotik,routerboard-wap-g-5hact2hnd)
- mikrotik_caldata_extract "art" 0x5000 0x844
+ mikrotik_caldata_extract "hard_config" 0x5000 0x844
;;
esac
;;