aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2014-10-06 04:52:07 +0000
committerJohn Crispin <john@openwrt.org>2014-10-06 04:52:07 +0000
commitb04bb3eea71338214ed83671f026e3e2625d23e8 (patch)
tree4c4369fcfa51a9951795dd86ba1b74349be6823a /target/linux
parent7ab5357280ba8d15ebb9a7b1121a754b1c473fd1 (diff)
downloadupstream-b04bb3eea71338214ed83671f026e3e2625d23e8.tar.gz
upstream-b04bb3eea71338214ed83671f026e3e2625d23e8.tar.bz2
upstream-b04bb3eea71338214ed83671f026e3e2625d23e8.zip
ramips: Support for RAMIPS based Tripmate HT-TM02 board
Provides support for the Tripmate HT-TM02 personal router including LEDs and reset button. “Mode” switch is not supported. New profile includes full set of packages required to enable LEDs, USB, and LUCI. Patches were applied against trunk snapshot r42649. Functionality has been tested in AP, basic wifi client, wifi router, and routed client modes - all good. Signed-off-by: Ron Curry <wingspinner@gmail.com> SVN-Revision: 42785
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network7
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/HT-TM02.dts104
-rw-r--r--target/linux/ramips/image/Makefile3
-rw-r--r--target/linux/ramips/rt305x/profiles/hootoo.mk28
8 files changed, 153 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index bf646ed53b..ecaaaff764 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -112,6 +112,10 @@ case $board in
hlk-rm04)
set_wifi_led "rt2800pci-phy0::radio"
;;
+ ht-tm02)
+ ucidef_set_led_netdev "eth" "ETH" "ht-tm02:white:status" "eth0"
+ set_wifi_led "ht-tm02:blue:wifi"
+ ;;
all0239-3g|\
hw550-3g)
set_usb_led "hw550-3g:green:usb"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index e027b3be89..c462fd8142 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -97,6 +97,12 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "4 9t"
;;
+ ht-tm02)
+ ucidef_set_interface_lan "eth0.1"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "4 6t"
+ ;;
+
3g-6200n | \
dir-610-a1 | \
dir-300-b7 | \
@@ -253,6 +259,7 @@ ramips_setup_macs()
hlk-rm04 | \
mpr-a1 | \
mpr-a2 | \
+ ht-tm02 | \
dir-300-b7 | \
dir-320-b1 | \
psr-680w |\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 9ad7ccbda1..9752eb22ec 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -63,6 +63,9 @@ get_status_led() {
hlk-rm04)
status_led="hlk-rm04:red:power"
;;
+ ht-tm02)
+ status_led="ht-tm02:white:status"
+ ;;
all0239-3g|\
hw550-3g)
status_led="hw550-3g:green:status"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index bb42ace621..68ff509a4e 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -157,6 +157,9 @@ ramips_board_detect() {
*"HILINK HLK-RM04")
name="hlk-rm04"
;;
+ *"HOOTOO HT-TM02")
+ name="ht-tm02"
+ ;;
*"HAME MPR-A1")
name="mpr-a1"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 407c21838a..4aec78099a 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -52,6 +52,7 @@ platform_check_image() {
hw550-3g | \
hg255d | \
hlk-rm04 | \
+ ht-tm02 | \
ip2202 | \
m3 | \
m4 | \
diff --git a/target/linux/ramips/dts/HT-TM02.dts b/target/linux/ramips/dts/HT-TM02.dts
new file mode 100644
index 0000000000..1f456f0546
--- /dev/null
+++ b/target/linux/ramips/dts/HT-TM02.dts
@@ -0,0 +1,104 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "HT-TM02", "ralink,rt5350-soc";
+ model = "HOOTOO HT-TM02";
+
+ palmbus@10000000 {
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l6405d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ esw@10110000 {
+ ralink,portmap = <0x3f>;
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ wifi {
+ label = "ht-tm02:blue:wifi";
+ gpios = <&gpio0 7 1>;
+ };
+ status {
+ label = "ht-tm02:yellow:status";
+ gpios = <&gpio0 12 1>;
+ };
+
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ wps {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x198>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 35057e49e4..c365d9dbb5 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -434,6 +434,8 @@ define BuildFirmware/HLKRM04/initramfs
endef
Image/Build/Profile/HLKRM04=$(call BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02)
+Image/Build/Profile/HT-TM02=$(call BuildFirmware/Default8M/$(1),$(1),ht-tm02,HT-TM02)
+
Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
@@ -598,6 +600,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/FREESTATION5,$(1))
# $(call Image/Build/Profile/HG255D,$(1))
$(call Image/Build/Profile/HLKRM04,$(1))
+ $(call Image/Build/Profile/HT-TM02,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
$(call Image/Build/Profile/IP2202,$(1))
$(call Image/Build/Profile/M3,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/hootoo.mk b/target/linux/ramips/rt305x/profiles/hootoo.mk
new file mode 100644
index 0000000000..976226d5bd
--- /dev/null
+++ b/target/linux/ramips/rt305x/profiles/hootoo.mk
@@ -0,0 +1,28 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+
+define Profile/HT-TM02
+ NAME:=HOOTOO HT-TM02
+ PACKAGES:=\
+ wpad-mini \
+ kmod-ledtrig-netdev kmod-ledtrig-timer kmod-leds-gpio kmod-ledtrig-default-on \
+ kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-net usbutils \
+ kmod-scsi-core kmod-scsi-generic kmod-fs-ext4 \
+ kmod-usb-storage kmod-usb-storage-extras block-mount \
+ kmod-usb-serial kmod-usb-serial-ftdi kmod-gpio-button-hotplug \
+ kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-utf8 luci luci-mod-admin-full \
+ kmod-app-samba luci-theme-openwrt luci-proto-relay relayd nano \
+ fstools
+endef
+
+define Profile/HT-TM02/Description
+ Package set for HOOTOO HT-TM02 board
+endef
+
+$(eval $(call Profile,HT-TM02))
+