aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2012-04-13 16:53:16 +0000
committerHauke Mehrtens <hauke@hauke-m.de>2012-04-13 16:53:16 +0000
commitc75e700d4234d149aeba5781d0a73cc329a6005c (patch)
treee50d6f8830dbac7471cef55ea14baa36b245aa54 /target/linux
parent99768ccb7c7593c36ebca250bd5cbe1d6b74d166 (diff)
downloadupstream-c75e700d4234d149aeba5781d0a73cc329a6005c.tar.gz
upstream-c75e700d4234d149aeba5781d0a73cc329a6005c.tar.bz2
upstream-c75e700d4234d149aeba5781d0a73cc329a6005c.zip
brcm47xx: remove support for kernel 3.0
SVN-Revision: 31276
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/brcm47xx/config-3.0140
-rw-r--r--target/linux/brcm47xx/patches-3.0/0008-bcm47xx-prepare-to-support-different-buses.patch443
-rw-r--r--target/linux/brcm47xx/patches-3.0/0009-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch395
-rw-r--r--target/linux/brcm47xx/patches-3.0/0010-bcm47xx-add-support-for-bcma-bus.patch410
-rw-r--r--target/linux/brcm47xx/patches-3.0/0011-bcm47xx-fix-irq-assignment-for-new-SoCs.patch37
-rw-r--r--target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch142
-rw-r--r--target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch681
-rw-r--r--target/linux/brcm47xx/patches-3.0/0014-ssb-move-flash-to-chipcommon.patch149
-rw-r--r--target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch697
-rw-r--r--target/linux/brcm47xx/patches-3.0/0016-brcm47xx-add-common-interface-for-sflash.patch193
-rw-r--r--target/linux/brcm47xx/patches-3.0/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch579
-rw-r--r--target/linux/brcm47xx/patches-3.0/0018-mtd-bcm47xx-add-parallel-flash-driver.patch240
-rw-r--r--target/linux/brcm47xx/patches-3.0/0019-mtd-bcm47xx-add-serial-flash-driver.patch330
-rw-r--r--target/linux/brcm47xx/patches-3.0/0020-bcm47xx-register-flash-drivers.patch100
-rw-r--r--target/linux/brcm47xx/patches-3.0/0021-add-workarround-for-wndr3400.patch51
-rw-r--r--target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch33
-rw-r--r--target/linux/brcm47xx/patches-3.0/0025-bcm47xx-read-nvram-from-sflash.patch118
-rw-r--r--target/linux/brcm47xx/patches-3.0/0026-bcma-export-needed-gpio-functions.patch47
-rw-r--r--target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch60
-rw-r--r--target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch115
-rw-r--r--target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch291
-rw-r--r--target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch265
-rw-r--r--target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch358
-rw-r--r--target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch325
-rw-r--r--target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch357
-rw-r--r--target/linux/brcm47xx/patches-3.0/0045-ssb-fix-cardbus-in-hostmode.patch22
-rw-r--r--target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch69
-rw-r--r--target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch141
-rw-r--r--target/linux/brcm47xx/patches-3.0/019-fix-boot.patch42
-rw-r--r--target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch13
-rw-r--r--target/linux/brcm47xx/patches-3.0/150-cpu_fixes.patch367
-rw-r--r--target/linux/brcm47xx/patches-3.0/160-kmap_coherent.patch77
-rw-r--r--target/linux/brcm47xx/patches-3.0/210-b44_phy_fix.patch61
-rw-r--r--target/linux/brcm47xx/patches-3.0/211-b44_timeout_spam.patch15
-rw-r--r--target/linux/brcm47xx/patches-3.0/220-bcm5354.patch42
-rw-r--r--target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch25
-rw-r--r--target/linux/brcm47xx/patches-3.0/300-fork_cacheflush.patch11
-rw-r--r--target/linux/brcm47xx/patches-3.0/301-kmod-fuse-dcache-bug-r4k.patch28
-rw-r--r--target/linux/brcm47xx/patches-3.0/302-kmod-fuse-dcache-bug-fuse.patch46
-rw-r--r--target/linux/brcm47xx/patches-3.0/310-no_highpage.patch66
-rw-r--r--target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch56
-rw-r--r--target/linux/brcm47xx/patches-3.0/601-mips-remove-pci-collision-check.patch18
-rw-r--r--target/linux/brcm47xx/patches-3.0/610-pci_ide_fix.patch14
-rw-r--r--target/linux/brcm47xx/patches-3.0/700-ssb-gigabit-ethernet-driver.patch325
-rw-r--r--target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch180
-rw-r--r--target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch305
-rw-r--r--target/linux/brcm47xx/patches-3.0/830-tg3_add_pci_ids.patch47
-rw-r--r--target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch104
-rw-r--r--target/linux/brcm47xx/patches-3.0/920-cache-wround.patch138
-rw-r--r--target/linux/brcm47xx/patches-3.0/940-bcm47xx-yenta.patch46
-rw-r--r--target/linux/brcm47xx/patches-3.0/976-ssb_increase_pci_delay.patch11
-rw-r--r--target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch13
-rw-r--r--target/linux/brcm47xx/patches-3.0/999-wl_exports.patch22
53 files changed, 0 insertions, 8860 deletions
diff --git a/target/linux/brcm47xx/config-3.0 b/target/linux/brcm47xx/config-3.0
deleted file mode 100644
index ddf2b2fea8..0000000000
--- a/target/linux/brcm47xx/config-3.0
+++ /dev/null
@@ -1,140 +0,0 @@
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ARPD is not set
-# CONFIG_ATH79 is not set
-CONFIG_B44=y
-CONFIG_B44_PCI=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_BCM47XX=y
-CONFIG_BCM47XX_BCMA=y
-CONFIG_BCM47XX_SSB=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_MIPS=y
-CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_POSSIBLE=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BRCMUTIL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CFE=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-# CONFIG_LANTIQ is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_MACH_NO_WESTBRIDGE=y
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_BCM47XX_PFLASH=y
-CONFIG_MTD_BCM47XX_SFLASH=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_RSA is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_EXTIF=y
-CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_SFLASH=y
-CONFIG_SSB_SPROM=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_USB_HCD_BCMA is not set
-# CONFIG_USB_HCD_SSB is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XZ_DEC=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm47xx/patches-3.0/0008-bcm47xx-prepare-to-support-different-buses.patch b/target/linux/brcm47xx/patches-3.0/0008-bcm47xx-prepare-to-support-different-buses.patch
deleted file mode 100644
index 5dd648da3c..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0008-bcm47xx-prepare-to-support-different-buses.patch
+++ /dev/null
@@ -1,443 +0,0 @@
-From 18fe82b600f9563e59e28746211a2ce3176a81de Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 6 Jun 2011 00:07:36 +0200
-Subject: [PATCH 08/26] bcm47xx: prepare to support different buses
-
-Prepare bcm47xx to support different System buses. Before adding
-support for bcma it should be possible to build bcm47xx without the
-need of ssb. With this patch bcm47xx does not directly contain a
-ssb_bus, but a union contain all the supported system buses. As a SoC
-just uses one system bus a union is a good choice.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/gpio.c | 56 ++++++++++++++++----------
- arch/mips/bcm47xx/nvram.c | 15 +++++--
- arch/mips/bcm47xx/serial.c | 13 +++++-
- arch/mips/bcm47xx/setup.c | 33 ++++++++++++---
- arch/mips/bcm47xx/time.c | 9 +++-
- arch/mips/bcm47xx/wgt634u.c | 14 ++++--
- arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 14 ++++++-
- arch/mips/include/asm/mach-bcm47xx/gpio.h | 55 ++++++++++++++++++-------
- drivers/watchdog/bcm47xx_wdt.c | 12 +++++-
- 9 files changed, 160 insertions(+), 61 deletions(-)
-
---- a/arch/mips/bcm47xx/gpio.c
-+++ b/arch/mips/bcm47xx/gpio.c
-@@ -20,42 +20,54 @@ static DECLARE_BITMAP(gpio_in_use, BCM47
-
- int gpio_request(unsigned gpio, const char *tag)
- {
-- if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
-- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-- return -EINVAL;
--
-- if (ssb_extif_available(&ssb_bcm47xx.extif) &&
-- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
-- return -EINVAL;
--
-- if (test_and_set_bit(gpio, gpio_in_use))
-- return -EBUSY;
--
-- return 0;
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
-+ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-+ return -EINVAL;
-+
-+ if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
-+ ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
-+ return -EINVAL;
-+
-+ if (test_and_set_bit(gpio, gpio_in_use))
-+ return -EBUSY;
-+
-+ return 0;
-+ }
-+ return -EINVAL;
- }
- EXPORT_SYMBOL(gpio_request);
-
- void gpio_free(unsigned gpio)
- {
-- if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
-- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-- return;
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
-+ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-+ return;
-+
-+ if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
-+ ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
-+ return;
-
-- if (ssb_extif_available(&ssb_bcm47xx.extif) &&
-- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
-+ clear_bit(gpio, gpio_in_use);
- return;
--
-- clear_bit(gpio, gpio_in_use);
-+ }
- }
- EXPORT_SYMBOL(gpio_free);
-
- int gpio_to_irq(unsigned gpio)
- {
-- if (ssb_chipco_available(&ssb_bcm47xx.chipco))
-- return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
-- else if (ssb_extif_available(&ssb_bcm47xx.extif))
-- return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
-- else
-- return -EINVAL;
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
-+ return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
-+ else if (ssb_extif_available(&bcm47xx_bus.ssb.extif))
-+ return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
-+ else
-+ return -EINVAL;
-+ }
-+ return -EINVAL;
- }
- EXPORT_SYMBOL_GPL(gpio_to_irq);
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -26,14 +26,21 @@ static char nvram_buf[NVRAM_SPACE];
- /* Probe for NVRAM header */
- static void early_nvram_init(void)
- {
-- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
-+ struct ssb_mipscore *mcore_ssb;
- struct nvram_header *header;
- int i;
-- u32 base, lim, off;
-+ u32 base = 0;
-+ u32 lim = 0;
-+ u32 off;
- u32 *src, *dst;
-
-- base = mcore->flash_window;
-- lim = mcore->flash_window_size;
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ mcore_ssb = &bcm47xx_bus.ssb.mipscore;
-+ base = mcore_ssb->flash_window;
-+ lim = mcore_ssb->flash_window_size;
-+ break;
-+ }
-
- off = FLASH_MIN;
- while (off <= lim) {
---- a/arch/mips/bcm47xx/serial.c
-+++ b/arch/mips/bcm47xx/serial.c
-@@ -23,10 +23,10 @@ static struct platform_device uart8250_d
- },
- };
-
--static int __init uart8250_init(void)
-+static int __init uart8250_init_ssb(void)
- {
- int i;
-- struct ssb_mipscore *mcore = &(ssb_bcm47xx.mipscore);
-+ struct ssb_mipscore *mcore = &(bcm47xx_bus.ssb.mipscore);
-
- memset(&uart8250_data, 0, sizeof(uart8250_data));
-
-@@ -45,6 +45,15 @@ static int __init uart8250_init(void)
- return platform_device_register(&uart8250_device);
- }
-
-+static int __init uart8250_init(void)
-+{
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ return uart8250_init_ssb();
-+ }
-+ return -EINVAL;
-+}
-+
- module_init(uart8250_init);
-
- MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -35,15 +35,22 @@
- #include <bcm47xx.h>
- #include <asm/mach-bcm47xx/nvram.h>
-
--struct ssb_bus ssb_bcm47xx;
--EXPORT_SYMBOL(ssb_bcm47xx);
-+union bcm47xx_bus bcm47xx_bus;
-+EXPORT_SYMBOL(bcm47xx_bus);
-+
-+enum bcm47xx_bus_type bcm47xx_bus_type;
-+EXPORT_SYMBOL(bcm47xx_bus_type);
-
- static void bcm47xx_machine_restart(char *command)
- {
- printk(KERN_ALERT "Please stand by while rebooting the system...\n");
- local_irq_disable();
- /* Set the watchdog timer to reset immediately */
-- ssb_watchdog_timer_set(&ssb_bcm47xx, 1);
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
-+ break;
-+ }
- while (1)
- cpu_relax();
- }
-@@ -52,7 +59,11 @@ static void bcm47xx_machine_halt(void)
- {
- /* Disable interrupts and watchdog and spin forever */
- local_irq_disable();
-- ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
-+ break;
-+ }
- while (1)
- cpu_relax();
- }
-@@ -247,7 +258,7 @@ static int bcm47xx_get_invariants(struct
- return 0;
- }
-
--void __init plat_mem_setup(void)
-+static void __init bcm47xx_register_ssb(void)
- {
- int err;
- char buf[100];
-@@ -258,12 +269,12 @@ void __init plat_mem_setup(void)
- printk(KERN_WARNING "bcm47xx: someone else already registered"
- " a ssb SPROM callback handler (err %d)\n", err);
-
-- err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
-+ err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
- bcm47xx_get_invariants);
- if (err)
- panic("Failed to initialize SSB bus (err %d)\n", err);
-
-- mcore = &ssb_bcm47xx.mipscore;
-+ mcore = &bcm47xx_bus.ssb.mipscore;
- if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
- if (strstr(buf, "console=ttyS1")) {
- struct ssb_serial_port port;
-@@ -276,6 +287,14 @@ void __init plat_mem_setup(void)
- memcpy(&mcore->serial_ports[1], &port, sizeof(port));
- }
- }
-+}
-+
-+void __init plat_mem_setup(void)
-+{
-+ struct cpuinfo_mips *c = &current_cpu_data;
-+
-+ bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
-+ bcm47xx_register_ssb();
-
- _machine_restart = bcm47xx_machine_restart;
- _machine_halt = bcm47xx_machine_halt;
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -30,7 +30,7 @@
-
- void __init plat_time_init(void)
- {
-- unsigned long hz;
-+ unsigned long hz = 0;
-
- /*
- * Use deterministic values for initial counter interrupt
-@@ -39,7 +39,12 @@ void __init plat_time_init(void)
- write_c0_count(0);
- write_c0_compare(0xffff);
-
-- hz = ssb_cpu_clock(&ssb_bcm47xx.mipscore) / 2;
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
-+ break;
-+ }
-+
- if (!hz)
- hz = 100000000;
-
---- a/arch/mips/bcm47xx/wgt634u.c
-+++ b/arch/mips/bcm47xx/wgt634u.c
-@@ -108,7 +108,7 @@ static irqreturn_t gpio_interrupt(int ir
-
- /* Interrupts are shared, check if the current one is
- a GPIO interrupt. */
-- if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
-+ if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
- SSB_CHIPCO_IRQ_GPIO))
- return IRQ_NONE;
-
-@@ -132,22 +132,26 @@ static int __init wgt634u_init(void)
- * machine. Use the MAC address as an heuristic. Netgear Inc. has
- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
- */
-+ u8 *et0mac;
-
-- u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
-+ if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
-+ return -ENODEV;
-+
-+ et0mac = bcm47xx_bus.ssb.sprom.et0mac;
-
- if (et0mac[0] == 0x00 &&
- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
-- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
-+ struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
-
- printk(KERN_INFO "WGT634U machine detected.\n");
-
- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
- gpio_interrupt, IRQF_SHARED,
-- "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
-+ "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
- gpio_direction_input(WGT634U_GPIO_RESET);
- gpio_intmask(WGT634U_GPIO_RESET, 1);
-- ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
-+ ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
- SSB_CHIPCO_IRQ_GPIO,
- SSB_CHIPCO_IRQ_GPIO);
- }
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-@@ -19,7 +19,17 @@
- #ifndef __ASM_BCM47XX_H
- #define __ASM_BCM47XX_H
-
--/* SSB bus */
--extern struct ssb_bus ssb_bcm47xx;
-+#include <linux/ssb/ssb.h>
-+
-+enum bcm47xx_bus_type {
-+ BCM47XX_BUS_TYPE_SSB,
-+};
-+
-+union bcm47xx_bus {
-+ struct ssb_bus ssb;
-+};
-+
-+extern union bcm47xx_bus bcm47xx_bus;
-+extern enum bcm47xx_bus_type bcm47xx_bus_type;
-
- #endif /* __ASM_BCM47XX_H */
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -21,41 +21,66 @@ extern int gpio_to_irq(unsigned gpio);
-
- static inline int gpio_get_value(unsigned gpio)
- {
-- return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio);
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
-+ }
-+ return -EINVAL;
- }
-
- static inline void gpio_set_value(unsigned gpio, int value)
- {
-- ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
-+ value ? 1 << gpio : 0);
-+ }
- }
-
- static inline int gpio_direction_input(unsigned gpio)
- {
-- ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0);
-- return 0;
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
-+ return 0;
-+ }
-+ return -EINVAL;
- }
-
- static inline int gpio_direction_output(unsigned gpio, int value)
- {
-- /* first set the gpio out value */
-- ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
-- /* then set the gpio mode */
-- ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio);
-- return 0;
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ /* first set the gpio out value */
-+ ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
-+ value ? 1 << gpio : 0);
-+ /* then set the gpio mode */
-+ ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
-+ return 0;
-+ }
-+ return -EINVAL;
- }
-
- static inline int gpio_intmask(unsigned gpio, int value)
- {
-- ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio,
-- value ? 1 << gpio : 0);
-- return 0;
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
-+ value ? 1 << gpio : 0);
-+ return 0;
-+ }
-+ return -EINVAL;
- }
-
- static inline int gpio_polarity(unsigned gpio, int value)
- {
-- ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio,
-- value ? 1 << gpio : 0);
-- return 0;
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
-+ value ? 1 << gpio : 0);
-+ return 0;
-+ }
-+ return -EINVAL;
- }
-
-
---- a/drivers/watchdog/bcm47xx_wdt.c
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -54,12 +54,20 @@ static atomic_t ticks;
- static inline void bcm47xx_wdt_hw_start(void)
- {
- /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
-- ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
-+ break;
-+ }
- }
-
- static inline int bcm47xx_wdt_hw_stop(void)
- {
-- return ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
-+ switch (bcm47xx_bus_type) {
-+ case BCM47XX_BUS_TYPE_SSB:
-+ return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
-+ }
-+ return -EINVAL;
- }
-
- static void bcm47xx_timer_tick(unsigned long unused)
diff --git a/target/linux/brcm47xx/patches-3.0/0009-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch b/target/linux/brcm47xx/patches-3.0/0009-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch
deleted file mode 100644
index 5b5771a85b..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0009-bcm47xx-make-it-possible-to-build-bcm47xx-without-ss.patch
+++ /dev/null
@@ -1,395 +0,0 @@
-From 1ba12ca9e05153fbc611918ec0ea4cd9ec97f2c8 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 22 Jun 2011 22:16:35 +0200
-Subject: [PATCH 09/26] bcm47xx: make it possible to build bcm47xx without ssb.
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/Kconfig | 8 +-------
- arch/mips/bcm47xx/Kconfig | 18 ++++++++++++++++++
- arch/mips/bcm47xx/Makefile | 3 ++-
- arch/mips/bcm47xx/gpio.c | 6 ++++++
- arch/mips/bcm47xx/nvram.c | 4 ++++
- arch/mips/bcm47xx/serial.c | 4 ++++
- arch/mips/bcm47xx/setup.c | 8 ++++++++
- arch/mips/bcm47xx/time.c | 2 ++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 4 ++++
- arch/mips/include/asm/mach-bcm47xx/gpio.h | 12 ++++++++++++
- arch/mips/pci/pci-bcm47xx.c | 6 ++++++
- drivers/watchdog/bcm47xx_wdt.c | 4 ++++
- 12 files changed, 71 insertions(+), 8 deletions(-)
- create mode 100644 arch/mips/bcm47xx/Kconfig
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -91,15 +91,8 @@ config BCM47XX
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
-- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
-- select SSB
-- select SSB_DRIVER_MIPS
-- select SSB_DRIVER_EXTIF
-- select SSB_EMBEDDED
-- select SSB_B43_PCI_BRIDGE if PCI
-- select SSB_PCICORE_HOSTMODE if PCI
- select GENERIC_GPIO
- select SYS_HAS_EARLY_PRINTK
- select CFE
-@@ -785,6 +778,7 @@ endchoice
-
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath79/Kconfig"
-+source "arch/mips/bcm47xx/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/jz4740/Kconfig"
---- /dev/null
-+++ b/arch/mips/bcm47xx/Kconfig
-@@ -0,0 +1,18 @@
-+if BCM47XX
-+
-+config BCM47XX_SSB
-+ bool "SSB Support for Broadcom BCM47XX"
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SSB
-+ select SSB_DRIVER_MIPS
-+ select SSB_DRIVER_EXTIF
-+ select SSB_EMBEDDED
-+ select SSB_B43_PCI_BRIDGE if PCI
-+ select SSB_PCICORE_HOSTMODE if PCI
-+ default y
-+ help
-+ Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
-+
-+ This will generate an image with support for SSB and MIPS32 R1 instruction set.
-+
-+endif
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,5 @@
- # under Linux.
- #
-
--obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
-+obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
-+obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
---- a/arch/mips/bcm47xx/gpio.c
-+++ b/arch/mips/bcm47xx/gpio.c
-@@ -21,6 +21,7 @@ static DECLARE_BITMAP(gpio_in_use, BCM47
- int gpio_request(unsigned gpio, const char *tag)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-@@ -34,6 +35,7 @@ int gpio_request(unsigned gpio, const ch
- return -EBUSY;
-
- return 0;
-+#endif
- }
- return -EINVAL;
- }
-@@ -42,6 +44,7 @@ EXPORT_SYMBOL(gpio_request);
- void gpio_free(unsigned gpio)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
-@@ -53,6 +56,7 @@ void gpio_free(unsigned gpio)
-
- clear_bit(gpio, gpio_in_use);
- return;
-+#endif
- }
- }
- EXPORT_SYMBOL(gpio_free);
-@@ -60,6 +64,7 @@ EXPORT_SYMBOL(gpio_free);
- int gpio_to_irq(unsigned gpio)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco))
- return ssb_mips_irq(bcm47xx_bus.ssb.chipco.dev) + 2;
-@@ -67,6 +72,7 @@ int gpio_to_irq(unsigned gpio)
- return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
- else
- return -EINVAL;
-+#endif
- }
- return -EINVAL;
- }
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -26,7 +26,9 @@ static char nvram_buf[NVRAM_SPACE];
- /* Probe for NVRAM header */
- static void early_nvram_init(void)
- {
-+#ifdef CONFIG_BCM47XX_SSB
- struct ssb_mipscore *mcore_ssb;
-+#endif
- struct nvram_header *header;
- int i;
- u32 base = 0;
-@@ -35,11 +37,13 @@ static void early_nvram_init(void)
- u32 *src, *dst;
-
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- mcore_ssb = &bcm47xx_bus.ssb.mipscore;
- base = mcore_ssb->flash_window;
- lim = mcore_ssb->flash_window_size;
- break;
-+#endif
- }
-
- off = FLASH_MIN;
---- a/arch/mips/bcm47xx/serial.c
-+++ b/arch/mips/bcm47xx/serial.c
-@@ -23,6 +23,7 @@ static struct platform_device uart8250_d
- },
- };
-
-+#ifdef CONFIG_BCM47XX_SSB
- static int __init uart8250_init_ssb(void)
- {
- int i;
-@@ -44,12 +45,15 @@ static int __init uart8250_init_ssb(void
- }
- return platform_device_register(&uart8250_device);
- }
-+#endif
-
- static int __init uart8250_init(void)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return uart8250_init_ssb();
-+#endif
- }
- return -EINVAL;
- }
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -47,9 +47,11 @@ static void bcm47xx_machine_restart(char
- local_irq_disable();
- /* Set the watchdog timer to reset immediately */
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
- break;
-+#endif
- }
- while (1)
- cpu_relax();
-@@ -60,14 +62,17 @@ static void bcm47xx_machine_halt(void)
- /* Disable interrupts and watchdog and spin forever */
- local_irq_disable();
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
- break;
-+#endif
- }
- while (1)
- cpu_relax();
- }
-
-+#ifdef CONFIG_BCM47XX_SSB
- #define READ_FROM_NVRAM(_outvar, name, buf) \
- if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
- sprom->_outvar = simple_strtoul(buf, NULL, 0);
-@@ -288,13 +293,16 @@ static void __init bcm47xx_register_ssb(
- }
- }
- }
-+#endif
-
- void __init plat_mem_setup(void)
- {
- struct cpuinfo_mips *c = &current_cpu_data;
-
-+#ifdef CONFIG_BCM47XX_SSB
- bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
- bcm47xx_register_ssb();
-+#endif
-
- _machine_restart = bcm47xx_machine_restart;
- _machine_halt = bcm47xx_machine_halt;
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -40,9 +40,11 @@ void __init plat_time_init(void)
- write_c0_compare(0xffff);
-
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
- break;
-+#endif
- }
-
- if (!hz)
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-@@ -22,11 +22,15 @@
- #include <linux/ssb/ssb.h>
-
- enum bcm47xx_bus_type {
-+#ifdef CONFIG_BCM47XX_SSB
- BCM47XX_BUS_TYPE_SSB,
-+#endif
- };
-
- union bcm47xx_bus {
-+#ifdef CONFIG_BCM47XX_SSB
- struct ssb_bus ssb;
-+#endif
- };
-
- extern union bcm47xx_bus bcm47xx_bus;
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -22,8 +22,10 @@ extern int gpio_to_irq(unsigned gpio);
- static inline int gpio_get_value(unsigned gpio)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
-+#endif
- }
- return -EINVAL;
- }
-@@ -31,18 +33,22 @@ static inline int gpio_get_value(unsigne
- static inline void gpio_set_value(unsigned gpio, int value)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
-+#endif
- }
- }
-
- static inline int gpio_direction_input(unsigned gpio)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
- return 0;
-+#endif
- }
- return -EINVAL;
- }
-@@ -50,6 +56,7 @@ static inline int gpio_direction_input(u
- static inline int gpio_direction_output(unsigned gpio, int value)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- /* first set the gpio out value */
- ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
-@@ -57,6 +64,7 @@ static inline int gpio_direction_output(
- /* then set the gpio mode */
- ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
- return 0;
-+#endif
- }
- return -EINVAL;
- }
-@@ -64,10 +72,12 @@ static inline int gpio_direction_output(
- static inline int gpio_intmask(unsigned gpio, int value)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
- return 0;
-+#endif
- }
- return -EINVAL;
- }
-@@ -75,10 +85,12 @@ static inline int gpio_intmask(unsigned
- static inline int gpio_polarity(unsigned gpio, int value)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
- return 0;
-+#endif
- }
- return -EINVAL;
- }
---- a/arch/mips/pci/pci-bcm47xx.c
-+++ b/arch/mips/pci/pci-bcm47xx.c
-@@ -25,6 +25,7 @@
- #include <linux/types.h>
- #include <linux/pci.h>
- #include <linux/ssb/ssb.h>
-+#include <bcm47xx.h>
-
- int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
-@@ -33,9 +34,13 @@ int __init pcibios_map_irq(const struct
-
- int pcibios_plat_dev_init(struct pci_dev *dev)
- {
-+#ifdef CONFIG_BCM47XX_SSB
- int res;
- u8 slot, pin;
-
-+ if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
-+ return 0;
-+
- res = ssb_pcibios_plat_dev_init(dev);
- if (res < 0) {
- printk(KERN_ALERT "PCI: Failed to init device %s\n",
-@@ -55,5 +60,6 @@ int pcibios_plat_dev_init(struct pci_dev
- }
-
- dev->irq = res;
-+#endif
- return 0;
- }
---- a/drivers/watchdog/bcm47xx_wdt.c
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -55,17 +55,21 @@ static inline void bcm47xx_wdt_hw_start(
- {
- /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
- break;
-+#endif
- }
- }
-
- static inline int bcm47xx_wdt_hw_stop(void)
- {
- switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
-+#endif
- }
- return -EINVAL;
- }
diff --git a/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-add-support-for-bcma-bus.patch b/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-add-support-for-bcma-bus.patch
deleted file mode 100644
index fc8b09d91b..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0010-bcm47xx-add-support-for-bcma-bus.patch
+++ /dev/null
@@ -1,410 +0,0 @@
-From d3fb63a710e1f04fed2c2703c6dce3531490c451 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 6 Jun 2011 00:07:37 +0200
-Subject: [PATCH 10/26] bcm47xx: add support for bcma bus
-
-This patch add support for the bcma bus. Broadcom uses only Mips 74K
-CPUs on the new SoC and on the old ons using ssb bus there are no Mips
-74K CPUs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/Kconfig | 13 ++++++
- arch/mips/bcm47xx/gpio.c | 22 +++++++++++
- arch/mips/bcm47xx/nvram.c | 10 +++++
- arch/mips/bcm47xx/serial.c | 29 ++++++++++++++
- arch/mips/bcm47xx/setup.c | 53 +++++++++++++++++++++++++-
- arch/mips/bcm47xx/time.c | 5 ++
- arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 8 ++++
- arch/mips/include/asm/mach-bcm47xx/gpio.h | 41 ++++++++++++++++++++
- drivers/watchdog/bcm47xx_wdt.c | 11 +++++
- 9 files changed, 190 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm47xx/Kconfig
-+++ b/arch/mips/bcm47xx/Kconfig
-@@ -15,4 +15,17 @@ config BCM47XX_SSB
-
- This will generate an image with support for SSB and MIPS32 R1 instruction set.
-
-+config BCM47XX_BCMA
-+ bool "BCMA Support for Broadcom BCM47XX"
-+ select SYS_HAS_CPU_MIPS32_R2
-+ select BCMA
-+ select BCMA_HOST_SOC
-+ select BCMA_DRIVER_MIPS
-+ select BCMA_DRIVER_PCI_HOSTMODE if PCI
-+ default y
-+ help
-+ Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
-+
-+ This will generate an image with support for BCMA and MIPS32 R2 instruction set.
-+
- endif
---- a/arch/mips/bcm47xx/gpio.c
-+++ b/arch/mips/bcm47xx/gpio.c
-@@ -36,6 +36,16 @@ int gpio_request(unsigned gpio, const ch
-
- return 0;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
-+ return -EINVAL;
-+
-+ if (test_and_set_bit(gpio, gpio_in_use))
-+ return -EBUSY;
-+
-+ return 0;
-+#endif
- }
- return -EINVAL;
- }
-@@ -57,6 +67,14 @@ void gpio_free(unsigned gpio)
- clear_bit(gpio, gpio_in_use);
- return;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
-+ return;
-+
-+ clear_bit(gpio, gpio_in_use);
-+ return;
-+#endif
- }
- }
- EXPORT_SYMBOL(gpio_free);
-@@ -73,6 +91,10 @@ int gpio_to_irq(unsigned gpio)
- else
- return -EINVAL;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ return bcma_core_mips_irq(bcm47xx_bus.bcma.bus.drv_cc.core) + 2;
-+#endif
- }
- return -EINVAL;
- }
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -29,6 +29,9 @@ static void early_nvram_init(void)
- #ifdef CONFIG_BCM47XX_SSB
- struct ssb_mipscore *mcore_ssb;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ struct bcma_drv_cc *bcma_cc;
-+#endif
- struct nvram_header *header;
- int i;
- u32 base = 0;
-@@ -44,6 +47,13 @@ static void early_nvram_init(void)
- lim = mcore_ssb->flash_window_size;
- break;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
-+ base = bcma_cc->pflash.window;
-+ lim = bcma_cc->pflash.window_size;
-+ break;
-+#endif
- }
-
- off = FLASH_MIN;
---- a/arch/mips/bcm47xx/serial.c
-+++ b/arch/mips/bcm47xx/serial.c
-@@ -47,6 +47,31 @@ static int __init uart8250_init_ssb(void
- }
- #endif
-
-+#ifdef CONFIG_BCM47XX_BCMA
-+static int __init uart8250_init_bcma(void)
-+{
-+ int i;
-+ struct bcma_drv_cc *cc = &(bcm47xx_bus.bcma.bus.drv_cc);
-+
-+ memset(&uart8250_data, 0, sizeof(uart8250_data));
-+
-+ for (i = 0; i < cc->nr_serial_ports; i++) {
-+ struct plat_serial8250_port *p = &(uart8250_data[i]);
-+ struct bcma_serial_port *bcma_port;
-+ bcma_port = &(cc->serial_ports[i]);
-+
-+ p->mapbase = (unsigned int) bcma_port->regs;
-+ p->membase = (void *) bcma_port->regs;
-+ p->irq = bcma_port->irq + 2;
-+ p->uartclk = bcma_port->baud_base;
-+ p->regshift = bcma_port->reg_shift;
-+ p->iotype = UPIO_MEM;
-+ p->flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-+ }
-+ return platform_device_register(&uart8250_device);
-+}
-+#endif
-+
- static int __init uart8250_init(void)
- {
- switch (bcm47xx_bus_type) {
-@@ -54,6 +79,10 @@ static int __init uart8250_init(void)
- case BCM47XX_BUS_TYPE_SSB:
- return uart8250_init_ssb();
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ return uart8250_init_bcma();
-+#endif
- }
- return -EINVAL;
- }
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -29,6 +29,7 @@
- #include <linux/types.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
-+#include <linux/bcma/bcma_soc.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -52,6 +53,11 @@ static void bcm47xx_machine_restart(char
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
- break;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
-+ break;
-+#endif
- }
- while (1)
- cpu_relax();
-@@ -67,6 +73,11 @@ static void bcm47xx_machine_halt(void)
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
- break;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
-+ break;
-+#endif
- }
- while (1)
- cpu_relax();
-@@ -295,16 +306,54 @@ static void __init bcm47xx_register_ssb(
- }
- #endif
-
-+#ifdef CONFIG_BCM47XX_BCMA
-+static void __init bcm47xx_register_bcma(void)
-+{
-+ int err;
-+
-+ err = bcma_host_soc_register(&bcm47xx_bus.bcma);
-+ if (err)
-+ panic("Failed to initialize BCMA bus (err %d)\n", err);
-+}
-+#endif
-+
- void __init plat_mem_setup(void)
- {
- struct cpuinfo_mips *c = &current_cpu_data;
-
-+ if (c->cputype == CPU_74K) {
-+ printk(KERN_INFO "bcm47xx: using bcma bus\n");
-+#ifdef CONFIG_BCM47XX_BCMA
-+ bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
-+ bcm47xx_register_bcma();
-+#endif
-+ } else {
-+ printk(KERN_INFO "bcm47xx: using ssb bus\n");
- #ifdef CONFIG_BCM47XX_SSB
-- bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
-- bcm47xx_register_ssb();
-+ bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
-+ bcm47xx_register_ssb();
- #endif
-+ }
-
- _machine_restart = bcm47xx_machine_restart;
- _machine_halt = bcm47xx_machine_halt;
- pm_power_off = bcm47xx_machine_halt;
- }
-+
-+static int __init bcm47xx_register_bus_complete(void)
-+{
-+ switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
-+ case BCM47XX_BUS_TYPE_SSB:
-+ /* Nothing to do */
-+ break;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_bus_register(&bcm47xx_bus.bcma.bus);
-+ break;
-+#endif
-+ }
-+ return 0;
-+}
-+device_initcall(bcm47xx_register_bus_complete);
---- a/arch/mips/bcm47xx/time.c
-+++ b/arch/mips/bcm47xx/time.c
-@@ -45,6 +45,11 @@ void __init plat_time_init(void)
- hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
- break;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
-+ break;
-+#endif
- }
-
- if (!hz)
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
-@@ -20,17 +20,25 @@
- #define __ASM_BCM47XX_H
-
- #include <linux/ssb/ssb.h>
-+#include <linux/bcma/bcma.h>
-+#include <linux/bcma/bcma_soc.h>
-
- enum bcm47xx_bus_type {
- #ifdef CONFIG_BCM47XX_SSB
- BCM47XX_BUS_TYPE_SSB,
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ BCM47XX_BUS_TYPE_BCMA,
-+#endif
- };
-
- union bcm47xx_bus {
- #ifdef CONFIG_BCM47XX_SSB
- struct ssb_bus ssb;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ struct bcma_soc bcma;
-+#endif
- };
-
- extern union bcm47xx_bus bcm47xx_bus;
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -10,6 +10,7 @@
- #define __BCM47XX_GPIO_H
-
- #include <linux/ssb/ssb_embedded.h>
-+#include <linux/bcma/bcma.h>
- #include <asm/mach-bcm47xx/bcm47xx.h>
-
- #define BCM47XX_EXTIF_GPIO_LINES 5
-@@ -26,6 +27,11 @@ static inline int gpio_get_value(unsigne
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc,
-+ 1 << gpio);
-+#endif
- }
- return -EINVAL;
- }
-@@ -37,6 +43,13 @@ static inline void gpio_set_value(unsign
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
-+ return;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
-+ value ? 1 << gpio : 0);
-+ return;
- #endif
- }
- }
-@@ -49,6 +62,12 @@ static inline int gpio_direction_input(u
- ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
- return 0;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
-+ 0);
-+ return 0;
-+#endif
- }
- return -EINVAL;
- }
-@@ -65,6 +84,16 @@ static inline int gpio_direction_output(
- ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
- return 0;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ /* first set the gpio out value */
-+ bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
-+ value ? 1 << gpio : 0);
-+ /* then set the gpio mode */
-+ bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
-+ 1 << gpio);
-+ return 0;
-+#endif
- }
- return -EINVAL;
- }
-@@ -78,6 +107,12 @@ static inline int gpio_intmask(unsigned
- value ? 1 << gpio : 0);
- return 0;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
-+ 1 << gpio, value ? 1 << gpio : 0);
-+ return 0;
-+#endif
- }
- return -EINVAL;
- }
-@@ -91,6 +126,12 @@ static inline int gpio_polarity(unsigned
- value ? 1 << gpio : 0);
- return 0;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
-+ 1 << gpio, value ? 1 << gpio : 0);
-+ return 0;
-+#endif
- }
- return -EINVAL;
- }
---- a/drivers/watchdog/bcm47xx_wdt.c
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -60,6 +60,12 @@ static inline void bcm47xx_wdt_hw_start(
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
- break;
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
-+ 0xfffffff);
-+ break;
-+#endif
- }
- }
-
-@@ -70,6 +76,11 @@ static inline int bcm47xx_wdt_hw_stop(vo
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
- #endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
-+ return 0;
-+#endif
- }
- return -EINVAL;
- }
diff --git a/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-fix-irq-assignment-for-new-SoCs.patch b/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-fix-irq-assignment-for-new-SoCs.patch
deleted file mode 100644
index 216c56d9e6..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0011-bcm47xx-fix-irq-assignment-for-new-SoCs.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 1c44f60e3fd9336d19f56a67c1efc1129fd728a6 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 6 Jun 2011 00:07:38 +0200
-Subject: [PATCH 11/26] bcm47xx: fix irq assignment for new SoCs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/irq.c | 12 ++++++++++++
- 1 files changed, 12 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm47xx/irq.c
-+++ b/arch/mips/bcm47xx/irq.c
-@@ -26,6 +26,7 @@
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <asm/irq_cpu.h>
-+#include <bcm47xx.h>
-
- void plat_irq_dispatch(void)
- {
-@@ -51,5 +52,16 @@ void plat_irq_dispatch(void)
-
- void __init arch_init_irq(void)
- {
-+#ifdef CONFIG_BCM47XX_BCMA
-+ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
-+ bcma_write32(bcm47xx_bus.bcma.bus.drv_mips.core,
-+ BCMA_MIPS_MIPS74K_INTMASK(5), 1 << 31);
-+ /*
-+ * the kernel reads the timer irq from some register and thinks
-+ * it's #5, but we offset it by 2 and route to #7
-+ */
-+ cp0_compare_irq = 7;
-+ }
-+#endif
- mips_cpu_irq_init();
- }
diff --git a/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch b/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch
deleted file mode 100644
index 11855b4496..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-flash-into-a-union.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From b7d9f9cd6a8e463c1061ea29ed3e614403625024 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 14:51:47 +0200
-Subject: [PATCH 12/26] bcma: move parallel flash into a union
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/nvram.c | 3 +
- drivers/bcma/driver_mips.c | 1 +
- include/linux/bcma/bcma_driver_chipcommon.h | 73 ++++++++++++++++++++++++++-
- 3 files changed, 76 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -50,6 +50,9 @@ static void early_nvram_init(void)
- #ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
-+ if (bcma_cc->flash_type != BCMA_PFLASH)
-+ return;
-+
- base = bcma_cc->pflash.window;
- lim = bcma_cc->pflash.window_size;
- break;
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -189,6 +189,7 @@ static void bcma_core_mips_flash_detect(
- break;
- case BCMA_CC_FLASHT_PARA:
- pr_info("found parallel flash.\n");
-+ bus->drv_cc.flash_type = BCMA_PFLASH;
- bus->drv_cc.pflash.window = 0x1c000000;
- bus->drv_cc.pflash.window_size = 0x02000000;
-
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -108,10 +108,68 @@
- #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
- #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
- #define BCMA_CC_FLASHCTL 0x0040
-+
-+/* Start/busy bit in flashcontrol */
-+#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff
-+#define BCMA_CC_FLASHCTL_ACTION 0x00000700
-+#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */
- #define BCMA_CC_FLASHCTL_START 0x80000000
- #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
-+
-+/* flashcontrol action+opcodes for ST flashes */
-+#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
-+#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
-+#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
-+#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
-+#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
-+#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */
-+#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */
-+#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */
-+#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */
-+#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */
-+#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
-+#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
-+
-+
-+/* flashcontrol action+opcodes for Atmel flashes */
-+#define BCMA_CC_FLASHCTL_AT_READ 0x07e8
-+#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2
-+#define BCMA_CC_FLASHCTL_AT_BUF1_READ
-+#define BCMA_CC_FLASHCTL_AT_BUF2_READ
-+#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7
-+#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384
-+#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387
-+#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283
-+#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286
-+#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288
-+#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289
-+#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281
-+#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250
-+#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
-+#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
-+#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253
-+#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255
-+#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260
-+#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261
-+#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
-+#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
-+
- #define BCMA_CC_FLASHADDR 0x0044
- #define BCMA_CC_FLASHDATA 0x0048
-+
-+/* Status register bits for ST flashes */
-+#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
-+#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
-+#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
-+#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2
-+#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
-+
-+/* Status register bits for Atmel flashes */
-+#define BCMA_CC_FLASHDATA_AT_READY 0x80
-+#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40
-+#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38
-+#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3
-+
- #define BCMA_CC_BCAST_ADDR 0x0050
- #define BCMA_CC_BCAST_DATA 0x0054
- #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
-@@ -300,6 +358,12 @@
- #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */
- #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */
-
-+#define BCMA_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
-+#define BCMA_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
-+#define BCMA_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
-+#define BCMA_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */
-+
-+
- /* Data for the PMU, if available.
- * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
- */
-@@ -309,6 +373,10 @@ struct bcma_chipcommon_pmu {
- };
-
- #ifdef CONFIG_BCMA_DRIVER_MIPS
-+enum bcma_flash_type {
-+ BCMA_PFLASH,
-+};
-+
- struct bcma_pflash {
- u8 buswidth;
- u32 window;
-@@ -334,7 +402,10 @@ struct bcma_drv_cc {
- u16 fast_pwrup_delay;
- struct bcma_chipcommon_pmu pmu;
- #ifdef CONFIG_BCMA_DRIVER_MIPS
-- struct bcma_pflash pflash;
-+ enum bcma_flash_type flash_type;
-+ union {
-+ struct bcma_pflash pflash;
-+ };
-
- int nr_serial_ports;
- struct bcma_serial_port serial_ports[4];
diff --git a/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch
deleted file mode 100644
index e78f3c4576..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0013-bcma-add-serial-flash-support-to-bcma.patch
+++ /dev/null
@@ -1,681 +0,0 @@
-From a62940e988526c881966a8c72cc28c95fca89f3c Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 14:53:07 +0200
-Subject: [PATCH 13/26] bcma: add serial flash support to bcma
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/Kconfig | 5 +
- drivers/bcma/Makefile | 1 +
- drivers/bcma/bcma_private.h | 5 +
- drivers/bcma/driver_chipcommon_sflash.c | 555 +++++++++++++++++++++++++++
- drivers/bcma/driver_mips.c | 8 +-
- include/linux/bcma/bcma_driver_chipcommon.h | 24 ++
- 6 files changed, 597 insertions(+), 1 deletions(-)
- create mode 100644 drivers/bcma/driver_chipcommon_sflash.c
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -38,6 +38,11 @@ config BCMA_HOST_SOC
- bool
- depends on BCMA_DRIVER_MIPS
-
-+config BCMA_SFLASH
-+ bool
-+ depends on BCMA_DRIVER_MIPS
-+ default y
-+
- config BCMA_DRIVER_MIPS
- bool "BCMA Broadcom MIPS core driver"
- depends on BCMA && MIPS
---- a/drivers/bcma/Makefile
-+++ b/drivers/bcma/Makefile
-@@ -1,5 +1,6 @@
- bcma-y += main.o scan.o core.o sprom.o
- bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
-+bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
- bcma-y += driver_pci.o
- bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
- bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -41,6 +41,11 @@ void bcma_chipco_serial_init(struct bcma
- u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
- u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
-
-+#ifdef CONFIG_BCMA_SFLASH
-+/* driver_chipcommon_sflash.c */
-+int bcma_sflash_init(struct bcma_drv_cc *cc);
-+#endif /* CONFIG_BCMA_SFLASH */
-+
- #ifdef CONFIG_BCMA_HOST_PCI
- /* host_pci.c */
- extern int __init bcma_host_pci_init(void);
---- /dev/null
-+++ b/drivers/bcma/driver_chipcommon_sflash.c
-@@ -0,0 +1,555 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
-+ * Copyright 2010, Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/bcma/bcma.h>
-+#include <linux/bcma/bcma_driver_chipcommon.h>
-+#include <linux/delay.h>
-+
-+#include "bcma_private.h"
-+
-+#define NUM_RETRIES 3
-+
-+
-+/* Issue a serial flash command */
-+static inline void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
-+{
-+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
-+ BCMA_CC_FLASHCTL_START | opcode);
-+ while (bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & BCMA_CC_FLASHCTL_BUSY)
-+ ;
-+}
-+
-+
-+static inline void bcma_sflash_write_u8(struct bcma_drv_cc *cc,
-+ u32 offset, u8 byte)
-+{
-+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
-+ bcma_cc_write32(cc, BCMA_CC_FLASHDATA, byte);
-+}
-+
-+/* Initialize serial flash access */
-+int bcma_sflash_init(struct bcma_drv_cc *cc)
-+{
-+ u32 id, id2;
-+
-+ memset(&cc->sflash, 0, sizeof(struct bcma_sflash));
-+
-+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-+ case BCMA_CC_FLASHT_STSER:
-+ /* Probe for ST chips */
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);
-+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
-+ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
-+ cc->sflash.blocksize = 64 * 1024;
-+ switch (id) {
-+ case 0x11:
-+ /* ST M25P20 2 Mbit Serial Flash */
-+ cc->sflash.numblocks = 4;
-+ break;
-+ case 0x12:
-+ /* ST M25P40 4 Mbit Serial Flash */
-+ cc->sflash.numblocks = 8;
-+ break;
-+ case 0x13:
-+ /* ST M25P80 8 Mbit Serial Flash */
-+ cc->sflash.numblocks = 16;
-+ break;
-+ case 0x14:
-+ /* ST M25P16 16 Mbit Serial Flash */
-+ cc->sflash.numblocks = 32;
-+ break;
-+ case 0x15:
-+ /* ST M25P32 32 Mbit Serial Flash */
-+ cc->sflash.numblocks = 64;
-+ break;
-+ case 0x16:
-+ /* ST M25P64 64 Mbit Serial Flash */
-+ cc->sflash.numblocks = 128;
-+ break;
-+ case 0x17:
-+ /* ST M25FL128 128 Mbit Serial Flash */
-+ cc->sflash.numblocks = 256;
-+ break;
-+ case 0xbf:
-+ /* All of the following flashes are SST with
-+ * 4KB subsectors. Others should be added but
-+ * We'll have to revamp the way we identify them
-+ * since RES is not eough to disambiguate them.
-+ */
-+ cc->sflash.blocksize = 4 * 1024;
-+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
-+ id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
-+ switch (id2) {
-+ case 1:
-+ /* SST25WF512 512 Kbit Serial Flash */
-+ case 0x48:
-+ /* SST25VF512 512 Kbit Serial Flash */
-+ cc->sflash.numblocks = 16;
-+ break;
-+ case 2:
-+ /* SST25WF010 1 Mbit Serial Flash */
-+ case 0x49:
-+ /* SST25VF010 1 Mbit Serial Flash */
-+ cc->sflash.numblocks = 32;
-+ break;
-+ case 3:
-+ /* SST25WF020 2 Mbit Serial Flash */
-+ case 0x43:
-+ /* SST25VF020 2 Mbit Serial Flash */
-+ cc->sflash.numblocks = 64;
-+ break;
-+ case 4:
-+ /* SST25WF040 4 Mbit Serial Flash */
-+ case 0x44:
-+ /* SST25VF040 4 Mbit Serial Flash */
-+ case 0x8d:
-+ /* SST25VF040B 4 Mbit Serial Flash */
-+ cc->sflash.numblocks = 128;
-+ break;
-+ case 5:
-+ /* SST25WF080 8 Mbit Serial Flash */
-+ case 0x8e:
-+ /* SST25VF080B 8 Mbit Serial Flash */
-+ cc->sflash.numblocks = 256;
-+ break;
-+ case 0x41:
-+ /* SST25VF016 16 Mbit Serial Flash */
-+ cc->sflash.numblocks = 512;
-+ break;
-+ case 0x4a:
-+ /* SST25VF032 32 Mbit Serial Flash */
-+ cc->sflash.numblocks = 1024;
-+ break;
-+ case 0x4b:
-+ /* SST25VF064 64 Mbit Serial Flash */
-+ cc->sflash.numblocks = 2048;
-+ break;
-+ }
-+ break;
-+ }
-+ break;
-+
-+ case BCMA_CC_FLASHT_ATSER:
-+ /* Probe for Atmel chips */
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
-+ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;
-+ switch (id) {
-+ case 0xc:
-+ /* Atmel AT45DB011 1Mbit Serial Flash */
-+ cc->sflash.blocksize = 256;
-+ cc->sflash.numblocks = 512;
-+ break;
-+ case 0x14:
-+ /* Atmel AT45DB021 2Mbit Serial Flash */
-+ cc->sflash.blocksize = 256;
-+ cc->sflash.numblocks = 1024;
-+ break;
-+ case 0x1c:
-+ /* Atmel AT45DB041 4Mbit Serial Flash */
-+ cc->sflash.blocksize = 256;
-+ cc->sflash.numblocks = 2048;
-+ break;
-+ case 0x24:
-+ /* Atmel AT45DB081 8Mbit Serial Flash */
-+ cc->sflash.blocksize = 256;
-+ cc->sflash.numblocks = 4096;
-+ break;
-+ case 0x2c:
-+ /* Atmel AT45DB161 16Mbit Serial Flash */
-+ cc->sflash.blocksize = 512;
-+ cc->sflash.numblocks = 4096;
-+ break;
-+ case 0x34:
-+ /* Atmel AT45DB321 32Mbit Serial Flash */
-+ cc->sflash.blocksize = 512;
-+ cc->sflash.numblocks = 8192;
-+ break;
-+ case 0x3c:
-+ /* Atmel AT45DB642 64Mbit Serial Flash */
-+ cc->sflash.blocksize = 1024;
-+ cc->sflash.numblocks = 8192;
-+ break;
-+ }
-+ break;
-+ }
-+
-+ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
-+
-+ return cc->sflash.size ? 0 : -ENODEV;
-+}
-+
-+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
-+int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+ u8 *buf)
-+{
-+ u8 *from, *to;
-+ u32 cnt, i;
-+
-+ if (!len)
-+ return 0;
-+
-+ if ((offset + len) > cc->sflash.size)
-+ return -EINVAL;
-+
-+ if ((len >= 4) && (offset & 3))
-+ cnt = 4 - (offset & 3);
-+ else if ((len >= 4) && ((u32)buf & 3))
-+ cnt = 4 - ((u32)buf & 3);
-+ else
-+ cnt = len;
-+
-+
-+ if (cc->core->id.rev == 12)
-+ from = (u8 *)KSEG1ADDR(BCMA_FLASH2 + offset);
-+ else
-+ from = (u8 *)KSEG0ADDR(BCMA_FLASH2 + offset);
-+
-+ to = (u8 *)buf;
-+
-+ if (cnt < 4) {
-+ for (i = 0; i < cnt; i++) {
-+ *to = readb(from);
-+ from++;
-+ to++;
-+ }
-+ return cnt;
-+ }
-+
-+ while (cnt >= 4) {
-+ *(u32 *)to = readl(from);
-+ from += 4;
-+ to += 4;
-+ cnt -= 4;
-+ }
-+
-+ return len - cnt;
-+}
-+
-+/* Poll for command completion. Returns zero when complete. */
-+int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset)
-+{
-+ if (offset >= cc->sflash.size)
-+ return -22;
-+
-+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-+ case BCMA_CC_FLASHT_STSER:
-+ /* Check for ST Write In Progress bit */
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RDSR);
-+ return bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
-+ & BCMA_CC_FLASHDATA_ST_WIP;
-+ case BCMA_CC_FLASHT_ATSER:
-+ /* Check for Atmel Ready bit */
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
-+ return !(bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
-+ & BCMA_CC_FLASHDATA_AT_READY);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static int sflash_st_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+ const u8 *buf)
-+{
-+ struct bcma_bus *bus = cc->core->bus;
-+ int ret = 0;
-+ bool is4712b0 = (bus->chipinfo.id == 0x4712) && (bus->chipinfo.rev == 3);
-+ u32 mask;
-+
-+
-+ /* Enable writes */
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
-+ if (is4712b0) {
-+ mask = 1 << 14;
-+ bcma_sflash_write_u8(cc, offset, *buf++);
-+ /* Set chip select */
-+ bcma_cc_set32(cc, BCMA_CC_GPIOOUT, mask);
-+ /* Issue a page program with the first byte */
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_PP);
-+ ret = 1;
-+ offset++;
-+ len--;
-+ while (len > 0) {
-+ if ((offset & 255) == 0) {
-+ /* Page boundary, drop cs and return */
-+ bcma_cc_mask32(cc, BCMA_CC_GPIOOUT, ~mask);
-+ udelay(1);
-+ if (!bcma_sflash_poll(cc, offset)) {
-+ /* Flash rejected command */
-+ return -EAGAIN;
-+ }
-+ return ret;
-+ } else {
-+ /* Write single byte */
-+ bcma_sflash_cmd(cc, *buf++);
-+ }
-+ ret++;
-+ offset++;
-+ len--;
-+ }
-+ /* All done, drop cs */
-+ bcma_cc_mask32(cc, BCMA_CC_GPIOOUT, ~mask);
-+ udelay(1);
-+ if (!bcma_sflash_poll(cc, offset)) {
-+ /* Flash rejected command */
-+ return -EAGAIN;
-+ }
-+ } else if (cc->core->id.rev >= 20) {
-+ bcma_sflash_write_u8(cc, offset, *buf++);
-+ /* Issue a page program with CSA bit set */
-+ bcma_sflash_cmd(cc,
-+ BCMA_CC_FLASHCTL_ST_CSA |
-+ BCMA_CC_FLASHCTL_ST_PP);
-+ ret = 1;
-+ offset++;
-+ len--;
-+ while (len > 0) {
-+ if ((offset & 255) == 0) {
-+ /* Page boundary, poll droping cs and return */
-+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
-+ udelay(1);
-+ if (!bcma_sflash_poll(cc, offset)) {
-+ /* Flash rejected command */
-+ return -EAGAIN;
-+ }
-+ return ret;
-+ } else {
-+ /* Write single byte */
-+ bcma_sflash_cmd(cc,
-+ BCMA_CC_FLASHCTL_ST_CSA |
-+ *buf++);
-+ }
-+ ret++;
-+ offset++;
-+ len--;
-+ }
-+ /* All done, drop cs & poll */
-+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
-+ udelay(1);
-+ if (!bcma_sflash_poll(cc, offset)) {
-+ /* Flash rejected command */
-+ return -EAGAIN;
-+ }
-+ } else {
-+ ret = 1;
-+ bcma_sflash_write_u8(cc, offset, *buf);
-+ /* Page program */
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_PP);
-+ }
-+ return ret;
-+}
-+
-+static int sflash_at_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+ const u8 *buf)
-+{
-+ struct bcma_sflash *sfl = &cc->sflash;
-+ u32 page, byte, mask;
-+ int ret = 0;
-+ mask = sfl->blocksize - 1;
-+ page = (offset & ~mask) << 1;
-+ byte = offset & mask;
-+ /* Read main memory page into buffer 1 */
-+ if (byte || (len < sfl->blocksize)) {
-+ int i = 100;
-+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_LOAD);
-+ /* 250 us for AT45DB321B */
-+ while (i > 0 && bcma_sflash_poll(cc, offset)) {
-+ udelay(10);
-+ i--;
-+ }
-+ BUG_ON(!bcma_sflash_poll(cc, offset));
-+ }
-+ /* Write into buffer 1 */
-+ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
-+ bcma_sflash_write_u8(cc, byte++, *buf++);
-+ bcma_sflash_cmd(cc,
-+ BCMA_CC_FLASHCTL_AT_BUF1_WRITE);
-+ }
-+ /* Write buffer 1 into main memory page */
-+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM);
-+
-+ return ret;
-+}
-+
-+/* Write len bytes starting at offset into buf. Returns number of bytes
-+ * written. Caller should poll for completion.
-+ */
-+int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+ const u8 *buf)
-+{
-+ struct bcma_sflash *sfl;
-+ int ret = 0, tries = NUM_RETRIES;
-+
-+ if (!len)
-+ return 0;
-+
-+ if ((offset + len) > cc->sflash.size)
-+ return -EINVAL;
-+
-+ sfl = &cc->sflash;
-+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-+ case BCMA_CC_FLASHT_STSER:
-+ do {
-+ ret = sflash_st_write(cc, offset, len, buf);
-+ tries--;
-+ } while (ret == -EAGAIN && tries > 0);
-+
-+ if (ret == -EAGAIN && tries == 0) {
-+ pr_info("ST Flash rejected write\n");
-+ ret = -EIO;
-+ }
-+ break;
-+ case BCMA_CC_FLASHT_ATSER:
-+ ret = sflash_at_write(cc, offset, len, buf);
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+/* Erase a region. Returns number of bytes scheduled for erasure.
-+ * Caller should poll for completion.
-+ */
-+int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset)
-+{
-+ struct bcma_sflash *sfl;
-+
-+ if (offset >= cc->sflash.size)
-+ return -EINVAL;
-+
-+ sfl = &cc->sflash;
-+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-+ case BCMA_CC_FLASHT_STSER:
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
-+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
-+ /* Newer flashes have "sub-sectors" which can be erased independently
-+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as
-+ * before.
-+ */
-+ bcma_sflash_cmd(cc, (sfl->blocksize < (64 * 1024)) ? BCMA_CC_FLASHCTL_ST_SSE : BCMA_CC_FLASHCTL_ST_SE);
-+ return sfl->blocksize;
-+ case BCMA_CC_FLASHT_ATSER:
-+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset << 1);
-+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_PAGE_ERASE);
-+ return sfl->blocksize;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * writes the appropriate range of flash, a NULL buf simply erases
-+ * the region of flash
-+ */
-+int bcma_sflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+ const u8 *buf)
-+{
-+ struct bcma_sflash *sfl;
-+ u8 *block = NULL, *cur_ptr, *blk_ptr;
-+ u32 blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
-+ u32 blk_offset, blk_len, copied;
-+ int bytes, ret = 0;
-+
-+ /* Check address range */
-+ if (len <= 0)
-+ return 0;
-+
-+ sfl = &cc->sflash;
-+ if ((offset + len) > sfl->size)
-+ return -EINVAL;
-+
-+ blocksize = sfl->blocksize;
-+ mask = blocksize - 1;
-+
-+ /* Allocate a block of mem */
-+ block = kmalloc(blocksize, GFP_KERNEL);
-+ if (!block)
-+ return -ENOMEM;
-+
-+ while (len) {
-+ /* Align offset */
-+ cur_offset = offset & ~mask;
-+ cur_length = blocksize;
-+ cur_ptr = block;
-+
-+ remainder = blocksize - (offset & mask);
-+ if (len < remainder)
-+ cur_retlen = len;
-+ else
-+ cur_retlen = remainder;
-+
-+ /* buf == NULL means erase only */
-+ if (buf) {
-+ /* Copy existing data into holding block if necessary */
-+ if ((offset & mask) || (len < blocksize)) {
-+ blk_offset = cur_offset;
-+ blk_len = cur_length;
-+ blk_ptr = cur_ptr;
-+
-+ /* Copy entire block */
-+ while (blk_len) {
-+ copied = bcma_sflash_read(cc,
-+ blk_offset,
-+ blk_len, blk_ptr);
-+ blk_offset += copied;
-+ blk_len -= copied;
-+ blk_ptr += copied;
-+ }
-+ }
-+
-+ /* Copy input data into holding block */
-+ memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
-+ }
-+
-+ /* Erase block */
-+ ret = bcma_sflash_erase(cc, cur_offset);
-+ if (ret < 0)
-+ goto done;
-+
-+ while (bcma_sflash_poll(cc, cur_offset));
-+
-+ /* buf == NULL means erase only */
-+ if (!buf) {
-+ offset += cur_retlen;
-+ len -= cur_retlen;
-+ continue;
-+ }
-+
-+ /* Write holding block */
-+ while (cur_length > 0) {
-+ bytes = bcma_sflash_write(cc, cur_offset,
-+ cur_length, cur_ptr);
-+
-+ if (bytes < 0) {
-+ ret = bytes;
-+ goto done;
-+ }
-+
-+ while (bcma_sflash_poll(cc, cur_offset))
-+ ;
-+
-+ cur_offset += bytes;
-+ cur_length -= bytes;
-+ cur_ptr += bytes;
-+ }
-+
-+ offset += cur_retlen;
-+ len -= cur_retlen;
-+ buf += cur_retlen;
-+ }
-+
-+ ret = len;
-+done:
-+ kfree(block);
-+ return ret;
-+}
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -185,7 +185,13 @@ static void bcma_core_mips_flash_detect(
- switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
- case BCMA_CC_FLASHT_STSER:
- case BCMA_CC_FLASHT_ATSER:
-- pr_err("Serial flash not supported.\n");
-+#ifdef CONFIG_BCMA_SFLASH
-+ pr_info("found serial flash.\n");
-+ bus->drv_cc.flash_type = BCMA_SFLASH;
-+ bcma_sflash_init(&bus->drv_cc);
-+#else
-+ pr_info("serial flash not supported.\n");
-+#endif /* CONFIG_BCMA_SFLASH */
- break;
- case BCMA_CC_FLASHT_PARA:
- pr_info("found parallel flash.\n");
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -375,6 +375,7 @@ struct bcma_chipcommon_pmu {
- #ifdef CONFIG_BCMA_DRIVER_MIPS
- enum bcma_flash_type {
- BCMA_PFLASH,
-+ BCMA_SFLASH,
- };
-
- struct bcma_pflash {
-@@ -383,6 +384,14 @@ struct bcma_pflash {
- u32 window_size;
- };
-
-+#ifdef CONFIG_BCMA_SFLASH
-+struct bcma_sflash {
-+ u32 blocksize; /* Block size */
-+ u32 numblocks; /* Number of blocks */
-+ u32 size; /* Total size in bytes */
-+};
-+#endif /* CONFIG_BCMA_SFLASH */
-+
- struct bcma_serial_port {
- void *regs;
- unsigned long clockspeed;
-@@ -405,6 +414,9 @@ struct bcma_drv_cc {
- enum bcma_flash_type flash_type;
- union {
- struct bcma_pflash pflash;
-+#ifdef CONFIG_BCMA_SFLASH
-+ struct bcma_sflash sflash;
-+#endif /* CONFIG_BCMA_SFLASH */
- };
-
- int nr_serial_ports;
-@@ -459,4 +471,16 @@ extern void bcma_chipco_chipctl_maskset(
- extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
- u32 offset, u32 mask, u32 set);
-
-+#ifdef CONFIG_BCMA_SFLASH
-+/* Chipcommon sflash support. */
-+int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+ u8 *buf);
-+int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset);
-+int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+ const u8 *buf);
-+int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset);
-+int bcma_sflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len,
-+ const u8 *buf);
-+#endif /* CONFIG_BCMA_SFLASH */
-+
- #endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/target/linux/brcm47xx/patches-3.0/0014-ssb-move-flash-to-chipcommon.patch b/target/linux/brcm47xx/patches-3.0/0014-ssb-move-flash-to-chipcommon.patch
deleted file mode 100644
index 91d8acb267..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0014-ssb-move-flash-to-chipcommon.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From e8afde87ecf56beff67c7d5371cabaa4fc018541 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 23 Jul 2011 23:57:06 +0200
-Subject: [PATCH 14/26] ssb: move flash to chipcommon
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/nvram.c | 8 +++---
- arch/mips/bcm47xx/wgt634u.c | 8 +++---
- drivers/ssb/driver_mipscore.c | 36 +++++++++++++++++++++-------
- include/linux/ssb/ssb_driver_chipcommon.h | 18 ++++++++++++++
- include/linux/ssb/ssb_driver_mips.h | 4 ---
- 5 files changed, 53 insertions(+), 21 deletions(-)
-
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -27,7 +27,7 @@ static char nvram_buf[NVRAM_SPACE];
- static void early_nvram_init(void)
- {
- #ifdef CONFIG_BCM47XX_SSB
-- struct ssb_mipscore *mcore_ssb;
-+ struct ssb_chipcommon *ssb_cc;
- #endif
- #ifdef CONFIG_BCM47XX_BCMA
- struct bcma_drv_cc *bcma_cc;
-@@ -42,9 +42,9 @@ static void early_nvram_init(void)
- switch (bcm47xx_bus_type) {
- #ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
-- mcore_ssb = &bcm47xx_bus.ssb.mipscore;
-- base = mcore_ssb->flash_window;
-- lim = mcore_ssb->flash_window_size;
-+ ssb_cc = &bcm47xx_bus.ssb.chipco;
-+ base = ssb_cc->pflash.window;
-+ lim = ssb_cc->pflash.window_size;
- break;
- #endif
- #ifdef CONFIG_BCM47XX_BCMA
---- a/arch/mips/bcm47xx/wgt634u.c
-+++ b/arch/mips/bcm47xx/wgt634u.c
-@@ -156,10 +156,10 @@ static int __init wgt634u_init(void)
- SSB_CHIPCO_IRQ_GPIO);
- }
-
-- wgt634u_flash_data.width = mcore->flash_buswidth;
-- wgt634u_flash_resource.start = mcore->flash_window;
-- wgt634u_flash_resource.end = mcore->flash_window
-- + mcore->flash_window_size
-+ wgt634u_flash_data.width = mcore->pflash.buswidth;
-+ wgt634u_flash_resource.start = mcore->pflash.window;
-+ wgt634u_flash_resource.end = mcore->pflash.window
-+ + mcore->pflash.window_size
- - 1;
- return platform_add_devices(wgt634u_devices,
- ARRAY_SIZE(wgt634u_devices));
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -190,16 +190,34 @@ static void ssb_mips_flash_detect(struct
- {
- struct ssb_bus *bus = mcore->dev->bus;
-
-- mcore->flash_buswidth = 2;
-- if (bus->chipco.dev) {
-- mcore->flash_window = 0x1c000000;
-- mcore->flash_window_size = 0x02000000;
-+ /* When there is no chipcommon on the bus there is 4MB flash */
-+ if (!bus->chipco.dev) {
-+ pr_info("found parallel flash.\n");
-+ bus->chipco.flash_type = SSB_PFLASH;
-+ bus->chipco.pflash.window = SSB_FLASH1;
-+ bus->chipco.pflash.window_size = SSB_FLASH1_SZ;
-+ bus->chipco.pflash.buswidth = 2;
-+ return;
-+ }
-+
-+ switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+ case SSB_CHIPCO_FLASHT_STSER:
-+ case SSB_CHIPCO_FLASHT_ATSER:
-+ pr_info("serial flash not supported.\n");
-+ break;
-+ case SSB_CHIPCO_FLASHT_PARA:
-+ pr_info("found parallel flash.\n");
-+ bus->chipco.flash_type = SSB_PFLASH;
-+ bus->chipco.pflash.window = SSB_FLASH2;
-+ bus->chipco.pflash.window_size = SSB_FLASH2_SZ;
- if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
-- & SSB_CHIPCO_CFG_DS16) == 0)
-- mcore->flash_buswidth = 1;
-- } else {
-- mcore->flash_window = 0x1fc00000;
-- mcore->flash_window_size = 0x00400000;
-+ & SSB_CHIPCO_CFG_DS16) == 0)
-+ bus->chipco.pflash.buswidth = 1;
-+ else
-+ bus->chipco.pflash.buswidth = 2;
-+ break;
-+ default:
-+ pr_err("flash not supported.\n");
- }
- }
-
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -582,6 +582,18 @@ struct ssb_chipcommon_pmu {
- u32 crystalfreq; /* The active crystal frequency (in kHz) */
- };
-
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+enum ssb_flash_type {
-+ SSB_PFLASH,
-+};
-+
-+struct ssb_pflash {
-+ u8 buswidth;
-+ u32 window;
-+ u32 window_size;
-+};
-+#endif /* CONFIG_SSB_DRIVER_MIPS */
-+
- struct ssb_chipcommon {
- struct ssb_device *dev;
- u32 capabilities;
-@@ -589,6 +601,12 @@ struct ssb_chipcommon {
- /* Fast Powerup Delay constant */
- u16 fast_pwrup_delay;
- struct ssb_chipcommon_pmu pmu;
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+ enum ssb_flash_type flash_type;
-+ union {
-+ struct ssb_pflash pflash;
-+ };
-+#endif /* CONFIG_SSB_DRIVER_MIPS */
- };
-
- static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
---- a/include/linux/ssb/ssb_driver_mips.h
-+++ b/include/linux/ssb/ssb_driver_mips.h
-@@ -19,10 +19,6 @@ struct ssb_mipscore {
-
- int nr_serial_ports;
- struct ssb_serial_port serial_ports[4];
--
-- u8 flash_buswidth;
-- u32 flash_window;
-- u32 flash_window_size;
- };
-
- extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
diff --git a/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch b/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch
deleted file mode 100644
index e91c2a44f4..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-support.patch
+++ /dev/null
@@ -1,697 +0,0 @@
-From 980da78179592a3f5f99168bc5af415835aa8c13 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 24 Jul 2011 20:20:36 +0200
-Subject: [PATCH 15/26] ssb: add serial flash support
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/ssb/Kconfig | 6 +
- drivers/ssb/Makefile | 1 +
- drivers/ssb/driver_chipcommon_sflash.c | 556 +++++++++++++++++++++++++++++
- drivers/ssb/driver_mipscore.c | 6 +
- drivers/ssb/ssb_private.h | 4 +
- include/linux/ssb/ssb_driver_chipcommon.h | 30 ++-
- 6 files changed, 601 insertions(+), 2 deletions(-)
- create mode 100644 drivers/ssb/driver_chipcommon_sflash.c
-
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -137,6 +137,12 @@ config SSB_DRIVER_MIPS
-
- If unsure, say N
-
-+config SSB_SFLASH
-+ bool
-+ depends on SSB_DRIVER_MIPS
-+ default y
-+
-+
- # Assumption: We are on embedded, if we compile the MIPS core.
- config SSB_EMBEDDED
- bool
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
- # built-in drivers
- ssb-y += driver_chipcommon.o
- ssb-y += driver_chipcommon_pmu.o
-+ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o
- ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
- ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
- ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
---- /dev/null
-+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -0,0 +1,556 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
-+ * Copyright 2010, Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_driver_chipcommon.h>
-+#include <linux/delay.h>
-+
-+#include "ssb_private.h"
-+
-+#define NUM_RETRIES 3
-+
-+
-+/* Issue a serial flash command */
-+static inline void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
-+{
-+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
-+ SSB_CHIPCO_FLASHCTL_START | opcode);
-+ while (chipco_read32(cc, SSB_CHIPCO_FLASHCTL)
-+ & SSB_CHIPCO_FLASHCTL_BUSY)
-+ ;
-+}
-+
-+
-+static inline void ssb_sflash_write_u8(struct ssb_chipcommon *cc,
-+ u32 offset, u8 byte)
-+{
-+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
-+ chipco_write32(cc, SSB_CHIPCO_FLASHDATA, byte);
-+}
-+
-+/* Initialize serial flash access */
-+int ssb_sflash_init(struct ssb_chipcommon *cc)
-+{
-+ u32 id, id2;
-+
-+ memset(&cc->sflash, 0, sizeof(struct ssb_sflash));
-+
-+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+ case SSB_CHIPCO_FLASHT_STSER:
-+ /* Probe for ST chips */
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
-+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
-+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
-+ cc->sflash.blocksize = 64 * 1024;
-+ switch (id) {
-+ case 0x11:
-+ /* ST M25P20 2 Mbit Serial Flash */
-+ cc->sflash.numblocks = 4;
-+ break;
-+ case 0x12:
-+ /* ST M25P40 4 Mbit Serial Flash */
-+ cc->sflash.numblocks = 8;
-+ break;
-+ case 0x13:
-+ /* ST M25P80 8 Mbit Serial Flash */
-+ cc->sflash.numblocks = 16;
-+ break;
-+ case 0x14:
-+ /* ST M25P16 16 Mbit Serial Flash */
-+ cc->sflash.numblocks = 32;
-+ break;
-+ case 0x15:
-+ /* ST M25P32 32 Mbit Serial Flash */
-+ cc->sflash.numblocks = 64;
-+ break;
-+ case 0x16:
-+ /* ST M25P64 64 Mbit Serial Flash */
-+ cc->sflash.numblocks = 128;
-+ break;
-+ case 0x17:
-+ /* ST M25FL128 128 Mbit Serial Flash */
-+ cc->sflash.numblocks = 256;
-+ break;
-+ case 0xbf:
-+ /* All of the following flashes are SST with
-+ * 4KB subsectors. Others should be added but
-+ * We'll have to revamp the way we identify them
-+ * since RES is not eough to disambiguate them.
-+ */
-+ cc->sflash.blocksize = 4 * 1024;
-+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
-+ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
-+ switch (id2) {
-+ case 1:
-+ /* SST25WF512 512 Kbit Serial Flash */
-+ case 0x48:
-+ /* SST25VF512 512 Kbit Serial Flash */
-+ cc->sflash.numblocks = 16;
-+ break;
-+ case 2:
-+ /* SST25WF010 1 Mbit Serial Flash */
-+ case 0x49:
-+ /* SST25VF010 1 Mbit Serial Flash */
-+ cc->sflash.numblocks = 32;
-+ break;
-+ case 3:
-+ /* SST25WF020 2 Mbit Serial Flash */
-+ case 0x43:
-+ /* SST25VF020 2 Mbit Serial Flash */
-+ cc->sflash.numblocks = 64;
-+ break;
-+ case 4:
-+ /* SST25WF040 4 Mbit Serial Flash */
-+ case 0x44:
-+ /* SST25VF040 4 Mbit Serial Flash */
-+ case 0x8d:
-+ /* SST25VF040B 4 Mbit Serial Flash */
-+ cc->sflash.numblocks = 128;
-+ break;
-+ case 5:
-+ /* SST25WF080 8 Mbit Serial Flash */
-+ case 0x8e:
-+ /* SST25VF080B 8 Mbit Serial Flash */
-+ cc->sflash.numblocks = 256;
-+ break;
-+ case 0x41:
-+ /* SST25VF016 16 Mbit Serial Flash */
-+ cc->sflash.numblocks = 512;
-+ break;
-+ case 0x4a:
-+ /* SST25VF032 32 Mbit Serial Flash */
-+ cc->sflash.numblocks = 1024;
-+ break;
-+ case 0x4b:
-+ /* SST25VF064 64 Mbit Serial Flash */
-+ cc->sflash.numblocks = 2048;
-+ break;
-+ }
-+ break;
-+ }
-+ break;
-+
-+ case SSB_CHIPCO_FLASHT_ATSER:
-+ /* Probe for Atmel chips */
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
-+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
-+ switch (id) {
-+ case 0xc:
-+ /* Atmel AT45DB011 1Mbit Serial Flash */
-+ cc->sflash.blocksize = 256;
-+ cc->sflash.numblocks = 512;
-+ break;
-+ case 0x14:
-+ /* Atmel AT45DB021 2Mbit Serial Flash */
-+ cc->sflash.blocksize = 256;
-+ cc->sflash.numblocks = 1024;
-+ break;
-+ case 0x1c:
-+ /* Atmel AT45DB041 4Mbit Serial Flash */
-+ cc->sflash.blocksize = 256;
-+ cc->sflash.numblocks = 2048;
-+ break;
-+ case 0x24:
-+ /* Atmel AT45DB081 8Mbit Serial Flash */
-+ cc->sflash.blocksize = 256;
-+ cc->sflash.numblocks = 4096;
-+ break;
-+ case 0x2c:
-+ /* Atmel AT45DB161 16Mbit Serial Flash */
-+ cc->sflash.blocksize = 512;
-+ cc->sflash.numblocks = 4096;
-+ break;
-+ case 0x34:
-+ /* Atmel AT45DB321 32Mbit Serial Flash */
-+ cc->sflash.blocksize = 512;
-+ cc->sflash.numblocks = 8192;
-+ break;
-+ case 0x3c:
-+ /* Atmel AT45DB642 64Mbit Serial Flash */
-+ cc->sflash.blocksize = 1024;
-+ cc->sflash.numblocks = 8192;
-+ break;
-+ }
-+ break;
-+ }
-+
-+ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
-+
-+ return cc->sflash.size ? 0 : -ENODEV;
-+}
-+
-+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
-+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+ u8 *buf)
-+{
-+ u8 *from, *to;
-+ u32 cnt, i;
-+
-+ if (!len)
-+ return 0;
-+
-+ if ((offset + len) > cc->sflash.size)
-+ return -EINVAL;
-+
-+ if ((len >= 4) && (offset & 3))
-+ cnt = 4 - (offset & 3);
-+ else if ((len >= 4) && ((u32)buf & 3))
-+ cnt = 4 - ((u32)buf & 3);
-+ else
-+ cnt = len;
-+
-+
-+ if (cc->dev->id.revision == 12)
-+ from = (u8 *)KSEG1ADDR(SSB_FLASH2 + offset);
-+ else
-+ from = (u8 *)KSEG0ADDR(SSB_FLASH2 + offset);
-+
-+ to = (u8 *)buf;
-+
-+ if (cnt < 4) {
-+ for (i = 0; i < cnt; i++) {
-+ *to = readb(from);
-+ from++;
-+ to++;
-+ }
-+ return cnt;
-+ }
-+
-+ while (cnt >= 4) {
-+ *(u32 *)to = readl(from);
-+ from += 4;
-+ to += 4;
-+ cnt -= 4;
-+ }
-+
-+ return len - cnt;
-+}
-+
-+/* Poll for command completion. Returns zero when complete. */
-+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset)
-+{
-+ if (offset >= cc->sflash.size)
-+ return -22;
-+
-+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+ case SSB_CHIPCO_FLASHT_STSER:
-+ /* Check for ST Write In Progress bit */
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RDSR);
-+ return chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
-+ & SSB_CHIPCO_FLASHSTA_ST_WIP;
-+ case SSB_CHIPCO_FLASHT_ATSER:
-+ /* Check for Atmel Ready bit */
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
-+ return !(chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
-+ & SSB_CHIPCO_FLASHSTA_AT_READY);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static int sflash_st_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+ const u8 *buf)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ int ret = 0;
-+ bool is4712b0 = (bus->chip_id == 0x4712) && (bus->chip_rev == 3);
-+ u32 mask;
-+
-+
-+ /* Enable writes */
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
-+ if (is4712b0) {
-+ mask = 1 << 14;
-+ ssb_sflash_write_u8(cc, offset, *buf++);
-+ /* Set chip select */
-+ chipco_set32(cc, SSB_CHIPCO_GPIOOUT, mask);
-+ /* Issue a page program with the first byte */
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
-+ ret = 1;
-+ offset++;
-+ len--;
-+ while (len > 0) {
-+ if ((offset & 255) == 0) {
-+ /* Page boundary, drop cs and return */
-+ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
-+ udelay(1);
-+ if (!ssb_sflash_poll(cc, offset)) {
-+ /* Flash rejected command */
-+ return -EAGAIN;
-+ }
-+ return ret;
-+ } else {
-+ /* Write single byte */
-+ ssb_sflash_cmd(cc, *buf++);
-+ }
-+ ret++;
-+ offset++;
-+ len--;
-+ }
-+ /* All done, drop cs */
-+ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
-+ udelay(1);
-+ if (!ssb_sflash_poll(cc, offset)) {
-+ /* Flash rejected command */
-+ return -EAGAIN;
-+ }
-+ } else if (cc->dev->id.revision >= 20) {
-+ ssb_sflash_write_u8(cc, offset, *buf++);
-+ /* Issue a page program with CSA bit set */
-+ ssb_sflash_cmd(cc,
-+ SSB_CHIPCO_FLASHCTL_ST_CSA |
-+ SSB_CHIPCO_FLASHCTL_ST_PP);
-+ ret = 1;
-+ offset++;
-+ len--;
-+ while (len > 0) {
-+ if ((offset & 255) == 0) {
-+ /* Page boundary, poll droping cs and return */
-+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
-+ udelay(1);
-+ if (!ssb_sflash_poll(cc, offset)) {
-+ /* Flash rejected command */
-+ return -EAGAIN;
-+ }
-+ return ret;
-+ } else {
-+ /* Write single byte */
-+ ssb_sflash_cmd(cc,
-+ SSB_CHIPCO_FLASHCTL_ST_CSA |
-+ *buf++);
-+ }
-+ ret++;
-+ offset++;
-+ len--;
-+ }
-+ /* All done, drop cs & poll */
-+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
-+ udelay(1);
-+ if (!ssb_sflash_poll(cc, offset)) {
-+ /* Flash rejected command */
-+ return -EAGAIN;
-+ }
-+ } else {
-+ ret = 1;
-+ ssb_sflash_write_u8(cc, offset, *buf);
-+ /* Page program */
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
-+ }
-+ return ret;
-+}
-+
-+static int sflash_at_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+ const u8 *buf)
-+{
-+ struct ssb_sflash *sfl = &cc->sflash;
-+ u32 page, byte, mask;
-+ int ret = 0;
-+ mask = sfl->blocksize - 1;
-+ page = (offset & ~mask) << 1;
-+ byte = offset & mask;
-+ /* Read main memory page into buffer 1 */
-+ if (byte || (len < sfl->blocksize)) {
-+ int i = 100;
-+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
-+ /* 250 us for AT45DB321B */
-+ while (i > 0 && ssb_sflash_poll(cc, offset)) {
-+ udelay(10);
-+ i--;
-+ }
-+ BUG_ON(!ssb_sflash_poll(cc, offset));
-+ }
-+ /* Write into buffer 1 */
-+ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
-+ ssb_sflash_write_u8(cc, byte++, *buf++);
-+ ssb_sflash_cmd(cc,
-+ SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
-+ }
-+ /* Write buffer 1 into main memory page */
-+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
-+
-+ return ret;
-+}
-+
-+/* Write len bytes starting at offset into buf. Returns number of bytes
-+ * written. Caller should poll for completion.
-+ */
-+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+ const u8 *buf)
-+{
-+ struct ssb_sflash *sfl;
-+ int ret = 0, tries = NUM_RETRIES;
-+
-+ if (!len)
-+ return 0;
-+
-+ if ((offset + len) > cc->sflash.size)
-+ return -EINVAL;
-+
-+ sfl = &cc->sflash;
-+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+ case SSB_CHIPCO_FLASHT_STSER:
-+ do {
-+ ret = sflash_st_write(cc, offset, len, buf);
-+ tries--;
-+ } while (ret == -EAGAIN && tries > 0);
-+
-+ if (ret == -EAGAIN && tries == 0) {
-+ pr_info("ST Flash rejected write\n");
-+ ret = -EIO;
-+ }
-+ break;
-+ case SSB_CHIPCO_FLASHT_ATSER:
-+ ret = sflash_at_write(cc, offset, len, buf);
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+/* Erase a region. Returns number of bytes scheduled for erasure.
-+ * Caller should poll for completion.
-+ */
-+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset)
-+{
-+ struct ssb_sflash *sfl;
-+
-+ if (offset >= cc->sflash.size)
-+ return -EINVAL;
-+
-+ sfl = &cc->sflash;
-+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-+ case SSB_CHIPCO_FLASHT_STSER:
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
-+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
-+ /* Newer flashes have "sub-sectors" which can be erased independently
-+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as
-+ * before.
-+ */
-+ ssb_sflash_cmd(cc, (sfl->blocksize < (64 * 1024)) ? SSB_CHIPCO_FLASHCTL_ST_SSE : SSB_CHIPCO_FLASHCTL_ST_SE);
-+ return sfl->blocksize;
-+ case SSB_CHIPCO_FLASHT_ATSER:
-+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset << 1);
-+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
-+ return sfl->blocksize;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * writes the appropriate range of flash, a NULL buf simply erases
-+ * the region of flash
-+ */
-+int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+ const u8 *buf)
-+{
-+ struct ssb_sflash *sfl;
-+ u8 *block = NULL, *cur_ptr, *blk_ptr;
-+ u32 blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
-+ u32 blk_offset, blk_len, copied;
-+ int bytes, ret = 0;
-+
-+ /* Check address range */
-+ if (len <= 0)
-+ return 0;
-+
-+ sfl = &cc->sflash;
-+ if ((offset + len) > sfl->size)
-+ return -EINVAL;
-+
-+ blocksize = sfl->blocksize;
-+ mask = blocksize - 1;
-+
-+ /* Allocate a block of mem */
-+ block = kmalloc(blocksize, GFP_KERNEL);
-+ if (!block)
-+ return -ENOMEM;
-+
-+ while (len) {
-+ /* Align offset */
-+ cur_offset = offset & ~mask;
-+ cur_length = blocksize;
-+ cur_ptr = block;
-+
-+ remainder = blocksize - (offset & mask);
-+ if (len < remainder)
-+ cur_retlen = len;
-+ else
-+ cur_retlen = remainder;
-+
-+ /* buf == NULL means erase only */
-+ if (buf) {
-+ /* Copy existing data into holding block if necessary */
-+ if ((offset & mask) || (len < blocksize)) {
-+ blk_offset = cur_offset;
-+ blk_len = cur_length;
-+ blk_ptr = cur_ptr;
-+
-+ /* Copy entire block */
-+ while (blk_len) {
-+ copied = ssb_sflash_read(cc,
-+ blk_offset,
-+ blk_len, blk_ptr);
-+ blk_offset += copied;
-+ blk_len -= copied;
-+ blk_ptr += copied;
-+ }
-+ }
-+
-+ /* Copy input data into holding block */
-+ memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
-+ }
-+
-+ /* Erase block */
-+ ret = ssb_sflash_erase(cc, cur_offset);
-+ if (ret < 0)
-+ goto done;
-+
-+ while (ssb_sflash_poll(cc, cur_offset));
-+
-+ /* buf == NULL means erase only */
-+ if (!buf) {
-+ offset += cur_retlen;
-+ len -= cur_retlen;
-+ continue;
-+ }
-+
-+ /* Write holding block */
-+ while (cur_length > 0) {
-+ bytes = ssb_sflash_write(cc, cur_offset,
-+ cur_length, cur_ptr);
-+
-+ if (bytes < 0) {
-+ ret = bytes;
-+ goto done;
-+ }
-+
-+ while (ssb_sflash_poll(cc, cur_offset))
-+ ;
-+
-+ cur_offset += bytes;
-+ cur_length -= bytes;
-+ cur_ptr += bytes;
-+ }
-+
-+ offset += cur_retlen;
-+ len -= cur_retlen;
-+ buf += cur_retlen;
-+ }
-+
-+ ret = len;
-+done:
-+ kfree(block);
-+ return ret;
-+}
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -203,7 +203,13 @@ static void ssb_mips_flash_detect(struct
- switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
- case SSB_CHIPCO_FLASHT_STSER:
- case SSB_CHIPCO_FLASHT_ATSER:
-+#ifdef CONFIG_SSB_SFLASH
-+ pr_info("found serial flash.\n");
-+ bus->chipco.flash_type = SSB_SFLASH;
-+ ssb_sflash_init(&bus->chipco);
-+#else
- pr_info("serial flash not supported.\n");
-+#endif /* CONFIG_SSB_SFLASH */
- break;
- case SSB_CHIPCO_FLASHT_PARA:
- pr_info("found parallel flash.\n");
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -192,6 +192,10 @@ extern int ssb_devices_freeze(struct ssb
- extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
-
-
-+#ifdef CONFIG_SSB_SFLASH
-+/* driver_chipcommon_sflash.c */
-+int ssb_sflash_init(struct ssb_chipcommon *cc);
-+#endif /* CONFIG_SSB_SFLASH */
-
- /* b43_pci_bridge.c */
- #ifdef CONFIG_SSB_B43_PCI_BRIDGE
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -503,8 +503,10 @@
- #define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
- #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
- #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
--#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
--#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
-+#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00D9 /* Deep Power-down */
-+#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
-+#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
-+#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
-
- /* Status register bits for ST flashes */
- #define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
-@@ -585,6 +587,7 @@ struct ssb_chipcommon_pmu {
- #ifdef CONFIG_SSB_DRIVER_MIPS
- enum ssb_flash_type {
- SSB_PFLASH,
-+ SSB_SFLASH,
- };
-
- struct ssb_pflash {
-@@ -592,6 +595,14 @@ struct ssb_pflash {
- u32 window;
- u32 window_size;
- };
-+
-+#ifdef CONFIG_SSB_SFLASH
-+struct ssb_sflash {
-+ u32 blocksize; /* Block size */
-+ u32 numblocks; /* Number of blocks */
-+ u32 size; /* Total size in bytes */
-+};
-+#endif /* CONFIG_SSB_SFLASH */
- #endif /* CONFIG_SSB_DRIVER_MIPS */
-
- struct ssb_chipcommon {
-@@ -605,6 +616,9 @@ struct ssb_chipcommon {
- enum ssb_flash_type flash_type;
- union {
- struct ssb_pflash pflash;
-+#ifdef CONFIG_SSB_SFLASH
-+ struct ssb_sflash sflash;
-+#endif /* CONFIG_SSB_SFLASH */
- };
- #endif /* CONFIG_SSB_DRIVER_MIPS */
- };
-@@ -666,6 +680,18 @@ extern int ssb_chipco_serial_init(struct
- struct ssb_serial_port *ports);
- #endif /* CONFIG_SSB_SERIAL */
-
-+#ifdef CONFIG_SSB_SFLASH
-+/* Chipcommon sflash support. */
-+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+ u8 *buf);
-+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset);
-+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+ const u8 *buf);
-+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset);
-+int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len,
-+ const u8 *buf);
-+#endif /* CONFIG_SSB_SFLASH */
-+
- /* PMU support */
- extern void ssb_pmu_init(struct ssb_chipcommon *cc);
-
diff --git a/target/linux/brcm47xx/patches-3.0/0016-brcm47xx-add-common-interface-for-sflash.patch b/target/linux/brcm47xx/patches-3.0/0016-brcm47xx-add-common-interface-for-sflash.patch
deleted file mode 100644
index 841c44dc2a..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0016-brcm47xx-add-common-interface-for-sflash.patch
+++ /dev/null
@@ -1,193 +0,0 @@
-From 4f314ac9edbc80897f158fdb4e1b1de8a2d0d432 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 24 Jul 2011 21:10:49 +0200
-Subject: [PATCH 16/26] brcm47xx: add common interface for sflash
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/Makefile | 2 +-
- arch/mips/bcm47xx/bus.c | 94 ++++++++++++++++++++++++++++++
- arch/mips/bcm47xx/setup.c | 8 +++
- arch/mips/include/asm/mach-bcm47xx/bus.h | 37 ++++++++++++
- 4 files changed, 140 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm47xx/bus.c
- create mode 100644 arch/mips/include/asm/mach-bcm47xx/bus.h
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,5 +3,5 @@
- # under Linux.
- #
-
--obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
-+obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o
- obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
---- /dev/null
-+++ b/arch/mips/bcm47xx/bus.c
-@@ -0,0 +1,94 @@
-+/*
-+ * BCM947xx nvram variable access
-+ *
-+ * Copyright (C) 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <bus.h>
-+
-+static int bcm47xx_sflash_bcma_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf)
-+{
-+ return bcma_sflash_read(dev->bcc, offset, len, buf);
-+}
-+
-+static int bcm47xx_sflash_bcma_poll(struct bcm47xx_sflash *dev, u32 offset)
-+{
-+ return bcma_sflash_poll(dev->bcc, offset);
-+}
-+
-+static int bcm47xx_sflash_bcma_write(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
-+{
-+ return bcma_sflash_write(dev->bcc, offset, len, buf);
-+}
-+
-+static int bcm47xx_sflash_bcma_erase(struct bcm47xx_sflash *dev, u32 offset)
-+{
-+ return bcma_sflash_erase(dev->bcc, offset);
-+}
-+
-+static int bcm47xx_sflash_bcma_commit(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
-+{
-+ return bcma_sflash_commit(dev->bcc, offset, len, buf);
-+}
-+
-+void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc)
-+{
-+ sflash->sflash_type = BCM47XX_BUS_TYPE_BCMA;
-+ sflash->bcc = bcc;
-+
-+ sflash->read = bcm47xx_sflash_bcma_read;
-+ sflash->poll = bcm47xx_sflash_bcma_poll;
-+ sflash->write = bcm47xx_sflash_bcma_write;
-+ sflash->erase = bcm47xx_sflash_bcma_erase;
-+ sflash->commit = bcm47xx_sflash_bcma_commit;
-+
-+ sflash->blocksize = bcc->sflash.blocksize;
-+ sflash->numblocks = bcc->sflash.numblocks;
-+ sflash->size = bcc->sflash.size;
-+}
-+
-+static int bcm47xx_sflash_ssb_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf)
-+{
-+ return ssb_sflash_read(dev->scc, offset, len, buf);
-+}
-+
-+static int bcm47xx_sflash_ssb_poll(struct bcm47xx_sflash *dev, u32 offset)
-+{
-+ return ssb_sflash_poll(dev->scc, offset);
-+}
-+
-+static int bcm47xx_sflash_ssb_write(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
-+{
-+ return ssb_sflash_write(dev->scc, offset, len, buf);
-+}
-+
-+static int bcm47xx_sflash_ssb_erase(struct bcm47xx_sflash *dev, u32 offset)
-+{
-+ return ssb_sflash_erase(dev->scc, offset);
-+}
-+
-+static int bcm47xx_sflash_ssb_commit(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf)
-+{
-+ return ssb_sflash_commit(dev->scc, offset, len, buf);
-+}
-+
-+void bcm47xx_sflash_struct_ssb_init(struct bcm47xx_sflash *sflash, struct ssb_chipcommon *scc)
-+{
-+ sflash->sflash_type = BCM47XX_BUS_TYPE_SSB;
-+ sflash->scc = scc;
-+
-+ sflash->read = bcm47xx_sflash_ssb_read;
-+ sflash->poll = bcm47xx_sflash_ssb_poll;
-+ sflash->write = bcm47xx_sflash_ssb_write;
-+ sflash->erase = bcm47xx_sflash_ssb_erase;
-+ sflash->commit = bcm47xx_sflash_ssb_commit;
-+
-+ sflash->blocksize = scc->sflash.blocksize;
-+ sflash->numblocks = scc->sflash.numblocks;
-+ sflash->size = scc->sflash.size;
-+}
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -42,6 +42,8 @@ EXPORT_SYMBOL(bcm47xx_bus);
- enum bcm47xx_bus_type bcm47xx_bus_type;
- EXPORT_SYMBOL(bcm47xx_bus_type);
-
-+struct bcm47xx_sflash bcm47xx_sflash;
-+
- static void bcm47xx_machine_restart(char *command)
- {
- printk(KERN_ALERT "Please stand by while rebooting the system...\n");
-@@ -290,6 +292,9 @@ static void __init bcm47xx_register_ssb(
- if (err)
- panic("Failed to initialize SSB bus (err %d)\n", err);
-
-+ if (bcm47xx_bus.ssb.chipco.flash_type == SSB_SFLASH)
-+ bcm47xx_sflash_struct_ssb_init(&bcm47xx_sflash, &bcm47xx_bus.ssb.chipco);
-+
- mcore = &bcm47xx_bus.ssb.mipscore;
- if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
- if (strstr(buf, "console=ttyS1")) {
-@@ -314,6 +319,9 @@ static void __init bcm47xx_register_bcma
- err = bcma_host_soc_register(&bcm47xx_bus.bcma);
- if (err)
- panic("Failed to initialize BCMA bus (err %d)\n", err);
-+
-+ if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_SFLASH)
-+ bcm47xx_sflash_struct_bcma_init(&bcm47xx_sflash, &bcm47xx_bus.bcma.bus.drv_cc);
- }
- #endif
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm47xx/bus.h
-@@ -0,0 +1,37 @@
-+/*
-+ * BCM947xx nvram variable access
-+ *
-+ * Copyright (C) 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/bcma/bcma.h>
-+#include <bcm47xx.h>
-+
-+struct bcm47xx_sflash {
-+ enum bcm47xx_bus_type sflash_type;
-+ union {
-+ struct ssb_chipcommon *scc;
-+ struct bcma_drv_cc *bcc;
-+ };
-+
-+ int (*read)(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf);
-+ int (*poll)(struct bcm47xx_sflash *dev, u32 offset);
-+ int (*write)(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf);
-+ int (*erase)(struct bcm47xx_sflash *dev, u32 offset);
-+ int (*commit)(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf);
-+
-+ u32 blocksize; /* Block size */
-+ u32 numblocks; /* Number of blocks */
-+ u32 size; /* Total size in bytes */
-+};
-+
-+void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc);
-+void bcm47xx_sflash_struct_ssb_init(struct bcm47xx_sflash *sflash, struct ssb_chipcommon *scc);
-+
-+extern struct bcm47xx_sflash bcm47xx_sflash;
diff --git a/target/linux/brcm47xx/patches-3.0/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch b/target/linux/brcm47xx/patches-3.0/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch
deleted file mode 100644
index 284b83aa52..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0017-mtd-bcm47xx-add-bcm47xx-part-parser.patch
+++ /dev/null
@@ -1,579 +0,0 @@
-From 1934b89b42976a083c2ad8d8fdc526ab5b05c5e4 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 14:54:11 +0200
-Subject: [PATCH 17/26] mtd: bcm47xx: add bcm47xx part parser
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/mtd/Kconfig | 7 +
- drivers/mtd/Makefile | 1 +
- drivers/mtd/bcm47xxpart.c | 536 +++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 544 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mtd/bcm47xxpart.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -173,6 +173,13 @@ config MTD_MYLOADER_PARTS
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically.
-
-+config MTD_BCM47XX_PARTS
-+ tristate "BCM47XX partitioning support"
-+ default y
-+ depends on BCM47XX
-+ ---help---
-+ bcm47XX partitioning support
-+
- comment "User Modules And Translation Layers"
-
- config MTD_CHAR
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR) += mtdchar.o
---- /dev/null
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -0,0 +1,536 @@
-+/*
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
-+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ * original functions for finding root filesystem from Mike Baker
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * Flash mapping for BCM947XX boards
-+ */
-+
-+#define pr_fmt(fmt) "bcm47xx_part: " fmt
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/wait.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/crc32.h>
-+#include <linux/io.h>
-+#include <asm/mach-bcm47xx/nvram.h>
-+#include <asm/mach-bcm47xx/bcm47xx.h>
-+#include <asm/fw/cfe/cfe_api.h>
-+
-+
-+#define TRX_MAGIC 0x30524448 /* "HDR0" */
-+#define TRX_VERSION 1
-+#define TRX_MAX_LEN 0x3A0000
-+#define TRX_NO_HEADER 1 /* Do not write TRX header */
-+#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */
-+#define TRX_MAX_OFFSET 3
-+
-+struct trx_header {
-+ u32 magic; /* "HDR0" */
-+ u32 len; /* Length of file including header */
-+ u32 crc32; /* 32-bit CRC from flag_version to end of file */
-+ u32 flag_version; /* 0:15 flags, 16:31 version */
-+ u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
-+};
-+
-+/* for Edimax Print servers which use an additional header
-+ * then the firmware on flash looks like :
-+ * EDIMAX HEADER | TRX HEADER
-+ * As this header is 12 bytes long we have to handle it
-+ * and skip it to find the TRX header
-+ */
-+#define EDIMAX_PS_HEADER_MAGIC 0x36315350 /* "PS16" */
-+#define EDIMAX_PS_HEADER_LEN 0xc /* 12 bytes long for edimax header */
-+
-+#define NVRAM_SPACE 0x8000
-+
-+#define ROUTER_NETGEAR_WGR614L 1
-+#define ROUTER_NETGEAR_WNR834B 2
-+#define ROUTER_NETGEAR_WNDR3300 3
-+#define ROUTER_NETGEAR_WNR3500L 4
-+#define ROUTER_SIMPLETECH_SIMPLESHARE 5
-+
-+static struct mtd_partition bcm47xx_parts[] = {
-+ { name: "cfe", offset:0, size:0, mask_flags:MTD_WRITEABLE, },
-+ { name: "linux", offset:0, size:0, },
-+ { name: "rootfs", offset:0, size:0, },
-+ { name: "nvram", offset:0, size:0, },
-+ { name: NULL, }, /* Used to create custom partitons with the function get_router() */
-+ { name: NULL, },
-+};
-+
-+static int
-+find_cfe_size(struct mtd_info *mtd)
-+{
-+ struct trx_header *trx;
-+ unsigned char buf[512];
-+ int off;
-+ size_t len;
-+ int blocksize;
-+
-+ trx = (struct trx_header *) buf;
-+
-+ blocksize = mtd->erasesize;
-+ if (blocksize < 0x10000)
-+ blocksize = 0x10000;
-+
-+ for (off = (128*1024); off < mtd->size; off += blocksize) {
-+ memset(buf, 0xe5, sizeof(buf));
-+
-+ /*
-+ * Read into buffer
-+ */
-+ if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
-+ len != sizeof(buf))
-+ continue;
-+
-+ if (le32_to_cpu(trx->magic) == EDIMAX_PS_HEADER_MAGIC) {
-+ if (mtd->read(mtd, off + EDIMAX_PS_HEADER_LEN,
-+ sizeof(buf), &len, buf) || len != sizeof(buf)) {
-+ continue;
-+ } else {
-+ pr_notice("Found edimax header\n");
-+ }
-+ }
-+
-+ /* found a TRX header */
-+ if (le32_to_cpu(trx->magic) == TRX_MAGIC)
-+ goto found;
-+ }
-+
-+ pr_notice("%s: Couldn't find bootloader size\n", mtd->name);
-+ return -1;
-+
-+ found:
-+ pr_notice("bootloader size: %d\n", off);
-+ return off;
-+
-+}
-+
-+/*
-+ * Copied from mtdblock.c
-+ *
-+ * Cache stuff...
-+ *
-+ * Since typical flash erasable sectors are much larger than what Linux's
-+ * buffer cache can handle, we must implement read-modify-write on flash
-+ * sectors for each block write requests. To avoid over-erasing flash sectors
-+ * and to speed things up, we locally cache a whole flash sector while it is
-+ * being written to until a different sector is required.
-+ */
-+
-+static void erase_callback(struct erase_info *done)
-+{
-+ wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
-+ wake_up(wait_q);
-+}
-+
-+static int erase_write(struct mtd_info *mtd, unsigned long pos,
-+ int len, const char *buf)
-+{
-+ struct erase_info erase;
-+ DECLARE_WAITQUEUE(wait, current);
-+ wait_queue_head_t wait_q;
-+ size_t retlen;
-+ int ret;
-+
-+ /*
-+ * First, let's erase the flash block.
-+ */
-+
-+ init_waitqueue_head(&wait_q);
-+ erase.mtd = mtd;
-+ erase.callback = erase_callback;
-+ erase.addr = pos;
-+ erase.len = len;
-+ erase.priv = (u_long)&wait_q;
-+
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ add_wait_queue(&wait_q, &wait);
-+
-+ ret = mtd->erase(mtd, &erase);
-+ if (ret) {
-+ set_current_state(TASK_RUNNING);
-+ remove_wait_queue(&wait_q, &wait);
-+ pr_warn("erase of region [0x%lx, 0x%x] on \"%s\" failed\n",
-+ pos, len, mtd->name);
-+ return ret;
-+ }
-+
-+ schedule(); /* Wait for erase to finish. */
-+ remove_wait_queue(&wait_q, &wait);
-+
-+ /*
-+ * Next, write data to flash.
-+ */
-+
-+ ret = mtd->write(mtd, pos, len, &retlen, buf);
-+ if (ret)
-+ return ret;
-+ if (retlen != len)
-+ return -EIO;
-+ return 0;
-+}
-+
-+
-+static int
-+find_dual_image_off(struct mtd_info *mtd)
-+{
-+ struct trx_header trx;
-+ int off, blocksize;
-+ size_t len;
-+
-+ blocksize = mtd->erasesize;
-+ if (blocksize < 0x10000)
-+ blocksize = 0x10000;
-+
-+ for (off = (128*1024); off < mtd->size; off += blocksize) {
-+ memset(&trx, 0xe5, sizeof(trx));
-+ /*
-+ * Read into buffer
-+ */
-+ if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
-+ len != sizeof(trx))
-+ continue;
-+ /* found last TRX header */
-+ if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
-+ if (le32_to_cpu(trx.flag_version >> 16) == 2) {
-+ pr_notice("dual image TRX header found\n");
-+ return mtd->size / 2;
-+ } else {
-+ return 0;
-+ }
-+ }
-+ }
-+ return 0;
-+}
-+
-+
-+static int
-+find_root(struct mtd_info *mtd, struct mtd_partition *part)
-+{
-+ struct trx_header trx, *trx2;
-+ unsigned char buf[512], *block;
-+ int off, blocksize, trxoff = 0;
-+ u32 i, crc = ~0;
-+ size_t len;
-+ bool edimax = false;
-+
-+ blocksize = mtd->erasesize;
-+ if (blocksize < 0x10000)
-+ blocksize = 0x10000;
-+
-+ for (off = (128*1024); off < mtd->size; off += blocksize) {
-+ memset(&trx, 0xe5, sizeof(trx));
-+
-+ /*
-+ * Read into buffer
-+ */
-+ if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
-+ len != sizeof(trx))
-+ continue;
-+
-+ /* found an edimax header */
-+ if (le32_to_cpu(trx.magic) == EDIMAX_PS_HEADER_MAGIC) {
-+ /* read the correct trx header */
-+ if (mtd->read(mtd, off + EDIMAX_PS_HEADER_LEN,
-+ sizeof(trx), &len, (char *) &trx) ||
-+ len != sizeof(trx)) {
-+ continue;
-+ } else {
-+ pr_notice("Found an edimax ps header\n");
-+ edimax = true;
-+ }
-+ }
-+
-+ /* found a TRX header */
-+ if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
-+ part->offset = le32_to_cpu(trx.offsets[2]) ? :
-+ le32_to_cpu(trx.offsets[1]);
-+ part->size = le32_to_cpu(trx.len);
-+
-+ part->size -= part->offset;
-+ part->offset += off;
-+ if (edimax) {
-+ off += EDIMAX_PS_HEADER_LEN;
-+ trxoff = EDIMAX_PS_HEADER_LEN;
-+ }
-+
-+ goto found;
-+ }
-+ }
-+
-+ pr_warn("%s: Couldn't find root filesystem\n",
-+ mtd->name);
-+ return -1;
-+
-+ found:
-+ pr_notice("TRX offset : %x\n", trxoff);
-+ if (part->size == 0)
-+ return 0;
-+
-+ if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
-+ return 0;
-+
-+ /* Move the fs outside of the trx */
-+ part->size = 0;
-+
-+ if (trx.len != part->offset + part->size - off) {
-+ /* Update the trx offsets and length */
-+ trx.len = part->offset + part->size - off;
-+
-+ /* Update the trx crc32 */
-+ for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
-+ if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
-+ return 0;
-+ crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
-+ }
-+ trx.crc32 = crc;
-+
-+ /* read first eraseblock from the trx */
-+ block = kmalloc(mtd->erasesize, GFP_KERNEL);
-+ trx2 = (struct trx_header *) block;
-+ if (mtd->read(mtd, off - trxoff, mtd->erasesize, &len, block) || len != mtd->erasesize) {
-+ pr_err("Error accessing the first trx eraseblock\n");
-+ return 0;
-+ }
-+
-+ pr_notice("Updating TRX offsets and length:\n");
-+ pr_notice("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
-+ pr_notice("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32);
-+
-+ /* Write updated trx header to the flash */
-+ memcpy(block + trxoff, &trx, sizeof(trx));
-+ if (mtd->unlock)
-+ mtd->unlock(mtd, off - trxoff, mtd->erasesize);
-+ erase_write(mtd, off - trxoff, mtd->erasesize, block);
-+ if (mtd->sync)
-+ mtd->sync(mtd);
-+ kfree(block);
-+ pr_notice("Done\n");
-+ }
-+
-+ return part->size;
-+}
-+
-+static int get_router(void)
-+{
-+ char buf[20];
-+ u32 boardnum = 0;
-+ u16 boardtype = 0;
-+ u16 boardrev = 0;
-+ u32 boardflags = 0;
-+ u16 sdram_init = 0;
-+ u16 cardbus = 0;
-+ u16 strev = 0;
-+
-+ if (nvram_getenv("boardnum", buf, sizeof(buf)) >= 0)
-+ boardnum = simple_strtoul(buf, NULL, 0);
-+ if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
-+ boardtype = simple_strtoul(buf, NULL, 0);
-+ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
-+ boardrev = simple_strtoul(buf, NULL, 0);
-+ if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0)
-+ boardflags = simple_strtoul(buf, NULL, 0);
-+ if (nvram_getenv("sdram_init", buf, sizeof(buf)) >= 0)
-+ sdram_init = simple_strtoul(buf, NULL, 0);
-+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
-+ cardbus = simple_strtoul(buf, NULL, 0);
-+ if (nvram_getenv("st_rev", buf, sizeof(buf)) >= 0)
-+ strev = simple_strtoul(buf, NULL, 0);
-+
-+ if ((boardnum == 8 || boardnum == 01)
-+ && boardtype == 0x0472 && cardbus == 1) {
-+ /* Netgear WNR834B, Netgear WNR834Bv2 */
-+ return ROUTER_NETGEAR_WNR834B;
-+ }
-+
-+ if (boardnum == 01 && boardtype == 0x0472 && boardrev == 0x23) {
-+ /* Netgear WNDR-3300 */
-+ return ROUTER_NETGEAR_WNDR3300;
-+ }
-+
-+ if ((boardnum == 83258 || boardnum == 01)
-+ && boardtype == 0x048e
-+ && (boardrev == 0x11 || boardrev == 0x10)
-+ && boardflags == 0x750
-+ && sdram_init == 0x000A) {
-+ /* Netgear WGR614v8/L/WW 16MB ram, cfe v1.3 or v1.5 */
-+ return ROUTER_NETGEAR_WGR614L;
-+ }
-+
-+ if ((boardnum == 1 || boardnum == 3500)
-+ && boardtype == 0x04CF
-+ && (boardrev == 0x1213 || boardrev == 02)) {
-+ /* Netgear WNR3500v2/U/L */
-+ return ROUTER_NETGEAR_WNR3500L;
-+ }
-+
-+ if (boardtype == 0x042f
-+ && boardrev == 0x10
-+ && boardflags == 0
-+ && strev == 0x11) {
-+ /* Simpletech Simpleshare */
-+ return ROUTER_SIMPLETECH_SIMPLESHARE;
-+ }
-+
-+ return 0;
-+}
-+
-+static int parse_bcm47xx_partitions(struct mtd_info *mtd,
-+ struct mtd_partition **pparts,
-+// struct mtd_part_parser_data *data)
-+ unsigned long data)
-+{
-+ int cfe_size;
-+ int dual_image_offset = 0;
-+ /* e.g Netgear 0x003e0000-0x003f0000 : "board_data", we exclude this
-+ * part from our mapping to prevent overwriting len/checksum on e.g.
-+ * Netgear WGR614v8/L/WW
-+ */
-+ int custom_data_size = 0;
-+
-+ cfe_size = find_cfe_size(mtd);
-+ if (cfe_size < 0)
-+ return 0;
-+
-+ /* boot loader */
-+ bcm47xx_parts[0].offset = 0;
-+ bcm47xx_parts[0].size = cfe_size;
-+
-+ /* nvram */
-+ if (cfe_size != 384 * 1024) {
-+
-+ switch (get_router()) {
-+ case ROUTER_NETGEAR_WGR614L:
-+ case ROUTER_NETGEAR_WNR834B:
-+ case ROUTER_NETGEAR_WNDR3300:
-+ case ROUTER_NETGEAR_WNR3500L:
-+ /* Netgear: checksum is @ 0x003AFFF8 for 4M flash or checksum
-+ * is @ 0x007AFFF8 for 8M flash
-+ */
-+ custom_data_size = mtd->erasesize;
-+
-+ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
-+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
-+
-+ /* Place CFE board_data into a partition */
-+ bcm47xx_parts[4].name = "board_data";
-+ bcm47xx_parts[4].offset = bcm47xx_parts[3].offset - custom_data_size;
-+ bcm47xx_parts[4].size = custom_data_size;
-+ break;
-+
-+ case ROUTER_SIMPLETECH_SIMPLESHARE:
-+ /* Fixup Simpletech Simple share nvram */
-+
-+ pr_notice("Setting up simpletech nvram\n");
-+ custom_data_size = mtd->erasesize;
-+
-+ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize) * 2;
-+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
-+
-+ /* Place backup nvram into a partition */
-+ bcm47xx_parts[4].name = "nvram_copy";
-+ bcm47xx_parts[4].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
-+ bcm47xx_parts[4].size = roundup(NVRAM_SPACE, mtd->erasesize);
-+ break;
-+
-+ default:
-+ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
-+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
-+ }
-+
-+ } else {
-+ /* nvram (old 128kb config partition on netgear wgt634u) */
-+ bcm47xx_parts[3].offset = bcm47xx_parts[0].size;
-+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
-+ }
-+
-+ /* dual image offset*/
-+ pr_notice("Looking for dual image\n");
-+ dual_image_offset = find_dual_image_off(mtd);
-+ /* linux (kernel and rootfs) */
-+ if (cfe_size != 384 * 1024) {
-+ if (get_router() == ROUTER_SIMPLETECH_SIMPLESHARE) {
-+ bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
-+ bcm47xx_parts[1].size = bcm47xx_parts[4].offset - dual_image_offset -
-+ bcm47xx_parts[1].offset - custom_data_size;
-+ } else {
-+ bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
-+ bcm47xx_parts[1].size = bcm47xx_parts[3].offset - dual_image_offset -
-+ bcm47xx_parts[1].offset - custom_data_size;
-+ }
-+ } else {
-+ /* do not count the elf loader, which is on one block */
-+ bcm47xx_parts[1].offset = bcm47xx_parts[0].size +
-+ bcm47xx_parts[3].size + mtd->erasesize;
-+ bcm47xx_parts[1].size = mtd->size -
-+ bcm47xx_parts[0].size -
-+ (2*bcm47xx_parts[3].size) -
-+ mtd->erasesize - custom_data_size;
-+ }
-+
-+ /* find and size rootfs */
-+ find_root(mtd, &bcm47xx_parts[2]);
-+ bcm47xx_parts[2].size = mtd->size - dual_image_offset -
-+ bcm47xx_parts[2].offset -
-+ bcm47xx_parts[3].size - custom_data_size;
-+ *pparts = bcm47xx_parts;
-+ return bcm47xx_parts[4].name == NULL ? 4 : 5;
-+}
-+
-+static struct mtd_part_parser bcm47xx_parser = {
-+ .owner = THIS_MODULE,
-+ .parse_fn = parse_bcm47xx_partitions,
-+ .name = "bcm47xx",
-+};
-+
-+static int __init bcm47xx_parser_init(void)
-+{
-+ return register_mtd_parser(&bcm47xx_parser);
-+}
-+
-+static void __exit bcm47xx_parser_exit(void)
-+{
-+ deregister_mtd_parser(&bcm47xx_parser);
-+}
-+
-+module_init(bcm47xx_parser_init);
-+module_exit(bcm47xx_parser_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Parsing code for flash partitions on bcm47xx SoCs");
diff --git a/target/linux/brcm47xx/patches-3.0/0018-mtd-bcm47xx-add-parallel-flash-driver.patch b/target/linux/brcm47xx/patches-3.0/0018-mtd-bcm47xx-add-parallel-flash-driver.patch
deleted file mode 100644
index 0ab81f33b8..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0018-mtd-bcm47xx-add-parallel-flash-driver.patch
+++ /dev/null
@@ -1,240 +0,0 @@
-From fb261916ee9cd9eede57f6255ffd39e4145da48e Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 14:55:18 +0200
-Subject: [PATCH 18/26] mtd: bcm47xx: add parallel flash driver
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/mtd/maps/Kconfig | 9 ++
- drivers/mtd/maps/Makefile | 1 +
- drivers/mtd/maps/bcm47xx-pflash.c | 198 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 208 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mtd/maps/bcm47xx-pflash.c
-
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -264,6 +264,15 @@ config MTD_LANTIQ
- help
- Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
-
-+config MTD_BCM47XX_PFLASH
-+ tristate "bcm47xx parallel flash support"
-+ default y
-+ depends on BCM47XX
-+ select MTD_PARTITIONS
-+ select MTD_BCM47XX_PARTS
-+ help
-+ Support for bcm47xx parallel flash
-+
- config MTD_DILNETPC
- tristate "CFI Flash device mapped on DIL/Net PC"
- depends on X86 && MTD_CFI_INTELEXT && BROKEN
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -60,3 +60,4 @@ obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr
- obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o
- obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
- obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
-+obj-$(CONFIG_MTD_BCM47XX_PFLASH)+= bcm47xx-pflash.o
---- /dev/null
-+++ b/drivers/mtd/maps/bcm47xx-pflash.c
-@@ -0,0 +1,198 @@
-+/*
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
-+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ * original functions for finding root filesystem from Mike Baker
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * Flash mapping for BCM947XX boards
-+ */
-+
-+#define pr_fmt(fmt) "bcm47xx_pflash: " fmt
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/io.h>
-+#include <asm/mach-bcm47xx/bcm47xx.h>
-+#include <linux/platform_device.h>
-+
-+#define WINDOW_ADDR 0x1fc00000
-+#define WINDOW_SIZE 0x400000
-+#define BUSWIDTH 2
-+
-+static struct mtd_info *bcm47xx_mtd;
-+
-+static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+ if (len == 1) {
-+ memcpy_fromio(to, map->virt + from, len);
-+ } else {
-+ int i;
-+ u16 *dest = (u16 *) to;
-+ u16 *src = (u16 *) (map->virt + from);
-+ for (i = 0; i < (len / 2); i++)
-+ dest[i] = src[i];
-+ if (len & 1)
-+ *((u8 *)dest+len-1) = src[i] & 0xff;
-+ }
-+}
-+
-+static struct map_info bcm47xx_map = {
-+ name: "Physically mapped flash",
-+ size : WINDOW_SIZE,
-+ bankwidth : BUSWIDTH,
-+ phys : WINDOW_ADDR,
-+};
-+
-+static const char *probes[] = { "bcm47xx", NULL };
-+
-+static int bcm47xx_mtd_probe(struct platform_device *pdev)
-+{
-+#ifdef CONFIG_BCM47XX_SSB
-+ struct ssb_chipcommon *ssb_cc;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ struct bcma_drv_cc *bcma_cc;
-+#endif
-+ int ret = 0;
-+ struct mtd_partition *partitions = NULL;
-+ int num_partitions = 0;
-+
-+ switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
-+ case BCM47XX_BUS_TYPE_SSB:
-+ ssb_cc = &bcm47xx_bus.ssb.chipco;
-+ if (ssb_cc->flash_type != SSB_PFLASH)
-+ return -ENODEV;
-+
-+ bcm47xx_map.phys = ssb_cc->pflash.window;
-+ bcm47xx_map.size = ssb_cc->pflash.window_size;
-+ bcm47xx_map.bankwidth = ssb_cc->pflash.buswidth;
-+ break;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
-+ if (bcma_cc->flash_type != BCMA_PFLASH)
-+ return -ENODEV;
-+
-+ bcm47xx_map.phys = bcma_cc->pflash.window;
-+ bcm47xx_map.size = bcma_cc->pflash.window_size;
-+ bcm47xx_map.bankwidth = bcma_cc->pflash.buswidth;
-+ break;
-+#endif
-+ }
-+
-+ pr_notice("flash init: 0x%08x 0x%08lx\n", bcm47xx_map.phys, bcm47xx_map.size);
-+ bcm47xx_map.virt = ioremap_nocache(bcm47xx_map.phys, bcm47xx_map.size);
-+
-+ if (!bcm47xx_map.virt) {
-+ pr_err("Failed to ioremap\n");
-+ return -EIO;
-+ }
-+
-+ simple_map_init(&bcm47xx_map);
-+ /* override copy_from routine */
-+ bcm47xx_map.copy_from = bcm47xx_map_copy_from;
-+
-+ bcm47xx_mtd = do_map_probe("cfi_probe", &bcm47xx_map);
-+ if (!bcm47xx_mtd) {
-+ pr_err("Failed to do_map_probe\n");
-+ ret = -ENXIO;
-+ goto err_unmap;
-+ }
-+ bcm47xx_mtd->owner = THIS_MODULE;
-+
-+ pr_notice("Flash device: 0x%lx at 0x%x\n", bcm47xx_map.size, WINDOW_ADDR);
-+
-+ num_partitions = parse_mtd_partitions(bcm47xx_mtd, probes, &partitions, 0);
-+ if (num_partitions < 0) {
-+ ret = num_partitions;
-+ goto err_unmap;
-+ }
-+
-+ ret = mtd_device_register(bcm47xx_mtd, partitions, num_partitions);
-+
-+// ret = mtd_device_parse_register(bcm47xx_mtd, "bcm47xx", NULL, NULL, 0);
-+
-+ if (ret) {
-+ pr_err("Flash: mtd_device_register failed\n");
-+ goto err_destroy;
-+ }
-+ return 0;
-+
-+err_destroy:
-+ map_destroy(bcm47xx_mtd);
-+err_unmap:
-+ iounmap(bcm47xx_map.virt);
-+ return ret;
-+}
-+
-+static int __devexit bcm47xx_mtd_remove(struct platform_device *pdev)
-+{
-+ mtd_device_unregister(bcm47xx_mtd);
-+ map_destroy(bcm47xx_mtd);
-+ iounmap(bcm47xx_map.virt);
-+ return 0;
-+}
-+
-+static struct platform_driver bcm47xx_mtd_driver = {
-+ .remove = __devexit_p(bcm47xx_mtd_remove),
-+ .driver = {
-+ .name = "bcm47xx_pflash",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init init_bcm47xx_mtd(void)
-+{
-+ int ret = platform_driver_probe(&bcm47xx_mtd_driver, bcm47xx_mtd_probe);
-+
-+ if (ret)
-+ pr_err("error registering platform driver: %i\n", ret);
-+ return ret;
-+}
-+
-+static void __exit exit_bcm47xx_mtd(void)
-+{
-+ platform_driver_unregister(&bcm47xx_mtd_driver);
-+}
-+
-+module_init(init_bcm47xx_mtd);
-+module_exit(exit_bcm47xx_mtd);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("BCM47XX parallel flash driver");
diff --git a/target/linux/brcm47xx/patches-3.0/0019-mtd-bcm47xx-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.0/0019-mtd-bcm47xx-add-serial-flash-driver.patch
deleted file mode 100644
index d9f961081d..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0019-mtd-bcm47xx-add-serial-flash-driver.patch
+++ /dev/null
@@ -1,330 +0,0 @@
-From 6a615274708fff685952139fee00ebccc0cf3266 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 14:55:45 +0200
-Subject: [PATCH 19/26] mtd: bcm47xx: add serial flash driver
-
-sflash get the sflash ops from platform device
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/include/asm/mach-bcm47xx/bus.h | 3 +
- drivers/mtd/maps/Kconfig | 9 +
- drivers/mtd/maps/Makefile | 1 +
- drivers/mtd/maps/bcm47xx-sflash.c | 267 ++++++++++++++++++++++++++++++
- 4 files changed, 280 insertions(+), 0 deletions(-)
- create mode 100644 drivers/mtd/maps/bcm47xx-sflash.c
-
---- a/arch/mips/include/asm/mach-bcm47xx/bus.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bus.h
-@@ -11,6 +11,7 @@
-
- #include <linux/ssb/ssb.h>
- #include <linux/bcma/bcma.h>
-+#include <linux/mtd/mtd.h>
- #include <bcm47xx.h>
-
- struct bcm47xx_sflash {
-@@ -29,6 +30,8 @@ struct bcm47xx_sflash {
- u32 blocksize; /* Block size */
- u32 numblocks; /* Number of blocks */
- u32 size; /* Total size in bytes */
-+
-+ struct mtd_info *mtd;
- };
-
- void bcm47xx_sflash_struct_bcma_init(struct bcm47xx_sflash *sflash, struct bcma_drv_cc *bcc);
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -273,6 +273,15 @@ config MTD_BCM47XX_PFLASH
- help
- Support for bcm47xx parallel flash
-
-+config MTD_BCM47XX_SFLASH
-+ tristate "bcm47xx serial flash support"
-+ default y
-+ depends on BCM47XX
-+ select MTD_PARTITIONS
-+ select MTD_BCM47XX_PARTS
-+ help
-+ Support for bcm47xx parallel flash
-+
- config MTD_DILNETPC
- tristate "CFI Flash device mapped on DIL/Net PC"
- depends on X86 && MTD_CFI_INTELEXT && BROKEN
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -61,3 +61,4 @@ obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-f
- obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
- obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
- obj-$(CONFIG_MTD_BCM47XX_PFLASH)+= bcm47xx-pflash.o
-+obj-$(CONFIG_MTD_BCM47XX_SFLASH)+= bcm47xx-sflash.o
---- /dev/null
-+++ b/drivers/mtd/maps/bcm47xx-sflash.c
-@@ -0,0 +1,267 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2006, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#define pr_fmt(fmt) "bcm47xx_sflash: " fmt
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/ioport.h>
-+#include <linux/sched.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <bcm47xx.h>
-+#include <bus.h>
-+
-+static int
-+sflash_mtd_poll(struct bcm47xx_sflash *sflash, unsigned int offset, int timeout)
-+{
-+ unsigned long now = jiffies;
-+ int ret = 0;
-+
-+ for (;;) {
-+ if (!sflash->poll(sflash, offset)) {
-+ ret = 0;
-+ break;
-+ }
-+ if (time_after(jiffies, now + timeout)) {
-+ pr_err("timeout while polling\n");
-+ ret = -ETIMEDOUT;
-+ break;
-+ }
-+ udelay(1);
-+ }
-+
-+ return ret;
-+}
-+
-+static int
-+sflash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv;
-+
-+ /* Check address range */
-+ if (!len)
-+ return 0;
-+
-+ if ((from + len) > mtd->size)
-+ return -EINVAL;
-+
-+ *retlen = 0;
-+
-+ while (len) {
-+ int ret = sflash->read(sflash, from, len, buf);
-+ if (ret < 0)
-+ return ret;
-+
-+ from += (loff_t) ret;
-+ len -= ret;
-+ buf += ret;
-+ *retlen += ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv;
-+
-+ /* Check address range */
-+ if (!len)
-+ return 0;
-+
-+ if ((to + len) > mtd->size)
-+ return -EINVAL;
-+
-+ *retlen = 0;
-+ while (len) {
-+ int bytes;
-+ int ret = sflash->write(sflash, to, len, buf);
-+ if (ret < 0)
-+ return ret;
-+
-+ bytes = ret;
-+
-+ ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10);
-+ if (ret)
-+ return ret;
-+
-+ to += (loff_t) bytes;
-+ len -= bytes;
-+ buf += bytes;
-+ *retlen += bytes;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase)
-+{
-+ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv;
-+ int i, j, ret = 0;
-+ unsigned int addr, len;
-+
-+ /* Check address range */
-+ if (!erase->len)
-+ return 0;
-+ if ((erase->addr + erase->len) > mtd->size)
-+ return -EINVAL;
-+
-+ addr = erase->addr;
-+ len = erase->len;
-+
-+ /* Ensure that requested regions are aligned */
-+ for (i = 0; i < mtd->numeraseregions; i++) {
-+ for (j = 0; j < mtd->eraseregions[i].numblocks; j++) {
-+ if (addr == mtd->eraseregions[i].offset +
-+ mtd->eraseregions[i].erasesize * j &&
-+ len >= mtd->eraseregions[i].erasesize) {
-+ ret = sflash->erase(sflash, addr);
-+ if (ret < 0)
-+ break;
-+ ret = sflash_mtd_poll(sflash, addr, 10 * HZ);
-+ if (ret)
-+ break;
-+ addr += mtd->eraseregions[i].erasesize;
-+ len -= mtd->eraseregions[i].erasesize;
-+ }
-+ }
-+ if (ret)
-+ break;
-+ }
-+
-+ /* Set erase status */
-+ if (ret)
-+ erase->state = MTD_ERASE_FAILED;
-+ else
-+ erase->state = MTD_ERASE_DONE;
-+
-+ /* Call erase callback */
-+ if (erase->callback)
-+ erase->callback(erase);
-+
-+ return ret;
-+}
-+
-+static const char *probes[] = { "bcm47xx", NULL };
-+
-+static int bcm47xx_sflash_probe(struct platform_device *pdev)
-+{
-+ struct bcm47xx_sflash *sflash = dev_get_platdata(&pdev->dev);
-+ struct mtd_info *mtd;
-+ struct mtd_erase_region_info *regions;
-+ int ret = 0;
-+
-+ struct mtd_partition *parts;
-+ int num_partitions = 0;
-+
-+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+ if (!mtd)
-+ return -ENOMEM;
-+
-+ regions = kzalloc(sizeof(struct mtd_erase_region_info), GFP_KERNEL);
-+ if (!mtd)
-+ return -ENOMEM;
-+
-+ pr_info("found serial flash: blocksize=%dKB, numblocks=%d, size=%dKB\n",
-+ sflash->blocksize/1024, sflash->numblocks, sflash->size / 1024);
-+
-+ /* Setup region info */
-+ regions->offset = 0;
-+ regions->erasesize = sflash->blocksize;
-+ regions->numblocks = sflash->numblocks;
-+ if (regions->erasesize > mtd->erasesize)
-+ mtd->erasesize = regions->erasesize;
-+ mtd->size = sflash->size;
-+ mtd->numeraseregions = 1;
-+
-+ /* Register with MTD */
-+ mtd->name = "bcm47xx-sflash";
-+ mtd->type = MTD_NORFLASH;
-+ mtd->flags = MTD_CAP_NORFLASH;
-+ mtd->eraseregions = regions;
-+ mtd->erase = sflash_mtd_erase;
-+ mtd->read = sflash_mtd_read;
-+ mtd->write = sflash_mtd_write;
-+ mtd->writesize = 1;
-+ mtd->priv = sflash;
-+ mtd->owner = THIS_MODULE;
-+
-+ num_partitions = parse_mtd_partitions(mtd, probes, &parts, 0);
-+ if (num_partitions < 0) {
-+ ret = num_partitions;
-+ goto err_destroy;
-+ }
-+
-+ ret = mtd_device_register(mtd, parts, num_partitions);
-+
-+// ret = mtd_device_parse_register(bcm47xx_mtd, "bcm47xx", NULL, NULL, 0);
-+
-+ if (ret) {
-+ pr_err("mtd_device_register failed\n");
-+ return ret;
-+ }
-+ sflash->mtd = mtd;
-+ return 0;
-+
-+err_destroy:
-+ map_destroy(mtd);
-+ return ret;
-+}
-+
-+static int __devexit bcm47xx_sflash_remove(struct platform_device *pdev)
-+{
-+ struct bcm47xx_sflash *sflash = dev_get_platdata(&pdev->dev);
-+
-+ if (sflash) {
-+ mtd_device_unregister(sflash->mtd);
-+ map_destroy(sflash->mtd);
-+ kfree(sflash->mtd->eraseregions);
-+ kfree(sflash->mtd);
-+ }
-+ return 0;
-+}
-+
-+static struct platform_driver bcm47xx_sflash_driver = {
-+ .remove = __devexit_p(bcm47xx_sflash_remove),
-+ .driver = {
-+ .name = "bcm47xx_sflash",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init init_bcm47xx_sflash(void)
-+{
-+ int ret = platform_driver_probe(&bcm47xx_sflash_driver, bcm47xx_sflash_probe);
-+
-+ if (ret)
-+ pr_err("error registering platform driver: %i\n", ret);
-+ return ret;
-+}
-+
-+static void __exit exit_bcm47xx_sflash(void)
-+{
-+ platform_driver_unregister(&bcm47xx_sflash_driver);
-+}
-+
-+module_init(init_bcm47xx_sflash);
-+module_exit(exit_bcm47xx_sflash);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("BCM47XX parallel flash driver");
diff --git a/target/linux/brcm47xx/patches-3.0/0020-bcm47xx-register-flash-drivers.patch b/target/linux/brcm47xx/patches-3.0/0020-bcm47xx-register-flash-drivers.patch
deleted file mode 100644
index 9c57a62c36..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0020-bcm47xx-register-flash-drivers.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 64f3d068654589d6114048ac5933cd4498706cfc Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 15:02:10 +0200
-Subject: [PATCH 20/26] bcm47xx: register flash drivers
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/setup.c | 72 +++++++++++++++++++++++++++++++++++++++++++++
- 1 files changed, 72 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -30,10 +30,12 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
-+#include <linux/platform_device.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
- #include <bcm47xx.h>
-+#include <bus.h>
- #include <asm/mach-bcm47xx/nvram.h>
-
- union bcm47xx_bus bcm47xx_bus;
-@@ -365,3 +367,73 @@ static int __init bcm47xx_register_bus_c
- return 0;
- }
- device_initcall(bcm47xx_register_bus_complete);
-+
-+static struct resource bcm47xx_pflash_resource = {
-+ .name = "bcm47xx_pflash",
-+ .start = 0,
-+ .end = 0,
-+ .flags = 0,
-+};
-+
-+static struct platform_device bcm47xx_pflash_dev = {
-+ .name = "bcm47xx_pflash",
-+ .resource = &bcm47xx_pflash_resource,
-+ .num_resources = 1,
-+};
-+
-+static struct resource bcm47xx_sflash_resource = {
-+ .name = "bcm47xx_sflash",
-+ .start = 0,
-+ .end = 0,
-+ .flags = 0,
-+};
-+
-+static struct platform_device bcm47xx_sflash_dev = {
-+ .name = "bcm47xx_sflash",
-+ .resource = &bcm47xx_sflash_resource,
-+ .num_resources = 1,
-+};
-+
-+static int __init bcm47xx_register_flash(void)
-+{
-+#ifdef CONFIG_BCM47XX_SSB
-+ struct ssb_chipcommon *chipco;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ struct bcma_drv_cc *drv_cc;
-+#endif
-+ switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
-+ case BCM47XX_BUS_TYPE_SSB:
-+ chipco = &bcm47xx_bus.ssb.chipco;
-+ if (chipco->flash_type == SSB_PFLASH) {
-+ bcm47xx_pflash_resource.start = chipco->pflash.window;
-+ bcm47xx_pflash_resource.end = chipco->pflash.window + chipco->pflash.window_size;
-+ return platform_device_register(&bcm47xx_pflash_dev);
-+ } else if (chipco->flash_type == SSB_SFLASH) {
-+ bcm47xx_sflash_dev.dev.platform_data = &bcm47xx_sflash;
-+ return platform_device_register(&bcm47xx_sflash_dev);
-+ } else {
-+ printk(KERN_ERR "No flash device found\n");
-+ return -1;
-+ }
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ drv_cc = &bcm47xx_bus.bcma.bus.drv_cc;
-+ if (drv_cc->flash_type == BCMA_PFLASH) {
-+ bcm47xx_pflash_resource.start = drv_cc->pflash.window;
-+ bcm47xx_pflash_resource.end = drv_cc->pflash.window + drv_cc->pflash.window_size;
-+ return platform_device_register(&bcm47xx_pflash_dev);
-+ } else if (drv_cc->flash_type == BCMA_SFLASH) {
-+ bcm47xx_sflash_dev.dev.platform_data = &bcm47xx_sflash;
-+ return platform_device_register(&bcm47xx_sflash_dev);
-+ } else {
-+ printk(KERN_ERR "No flash device found\n");
-+ return -1;
-+ }
-+#endif
-+ }
-+ return -1;
-+}
-+fs_initcall(bcm47xx_register_flash);
diff --git a/target/linux/brcm47xx/patches-3.0/0021-add-workarround-for-wndr3400.patch b/target/linux/brcm47xx/patches-3.0/0021-add-workarround-for-wndr3400.patch
deleted file mode 100644
index 2cce8b97b9..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0021-add-workarround-for-wndr3400.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 3e889f1cf928c6d87229761a0bc4c18c775a988b Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 Jul 2011 21:13:32 +0200
-Subject: [PATCH 21/26] add workarround for wndr3400
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/mtd/bcm47xxpart.c | 17 ++++++++++++-----
- 1 files changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -78,11 +78,12 @@ struct trx_header {
-
- #define NVRAM_SPACE 0x8000
-
--#define ROUTER_NETGEAR_WGR614L 1
--#define ROUTER_NETGEAR_WNR834B 2
--#define ROUTER_NETGEAR_WNDR3300 3
--#define ROUTER_NETGEAR_WNR3500L 4
--#define ROUTER_SIMPLETECH_SIMPLESHARE 5
-+#define ROUTER_NETGEAR_WGR614L 1
-+#define ROUTER_NETGEAR_WNR834B 2
-+#define ROUTER_NETGEAR_WNDR3300 3
-+#define ROUTER_NETGEAR_WNR3500L 4
-+#define ROUTER_SIMPLETECH_SIMPLESHARE 5
-+#define ROUTER_NETGEAR_WNDR3400 6
-
- static struct mtd_partition bcm47xx_parts[] = {
- { name: "cfe", offset:0, size:0, mask_flags:MTD_WRITEABLE, },
-@@ -400,6 +401,11 @@ static int get_router(void)
- return ROUTER_NETGEAR_WNR3500L;
- }
-
-+ if (boardnum == 1 && boardtype == 0xb4cf && boardrev == 0x1100) {
-+ /* Netgear WNDR3400 */
-+ return ROUTER_NETGEAR_WNDR3400;
-+ }
-+
- if (boardtype == 0x042f
- && boardrev == 0x10
- && boardflags == 0
-@@ -440,6 +446,7 @@ static int parse_bcm47xx_partitions(stru
- case ROUTER_NETGEAR_WNR834B:
- case ROUTER_NETGEAR_WNDR3300:
- case ROUTER_NETGEAR_WNR3500L:
-+ case ROUTER_NETGEAR_WNDR3400:
- /* Netgear: checksum is @ 0x003AFFF8 for 4M flash or checksum
- * is @ 0x007AFFF8 for 8M flash
- */
diff --git a/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch b/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch
deleted file mode 100644
index fee1d0a5a6..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0023-bcma-use-randoom-mac-address-as-long-as-reading-it-o.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From e6730c06cfc827d715f43e9bd276ae939bb86af9 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 22 Jul 2011 17:11:51 +0200
-Subject: [PATCH 23/26] bcma: use randoom mac address as long as reading it out does not work
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/sprom.c | 5 ++++-
- 1 files changed, 4 insertions(+), 1 deletions(-)
-
---- a/drivers/bcma/sprom.c
-+++ b/drivers/bcma/sprom.c
-@@ -13,6 +13,7 @@
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
- #include <linux/slab.h>
-+#include <linux/etherdevice.h>
-
- #define SPOFF(offset) ((offset) / sizeof(u16))
-
-@@ -214,8 +215,10 @@ int bcma_sprom_get(struct bcma_bus *bus)
- if (!bus->drv_cc.core)
- return -EOPNOTSUPP;
-
-- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
-+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) {
-+ random_ether_addr(bus->sprom.il0mac);
- return -ENOENT;
-+ }
-
- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
- GFP_KERNEL);
diff --git a/target/linux/brcm47xx/patches-3.0/0025-bcm47xx-read-nvram-from-sflash.patch b/target/linux/brcm47xx/patches-3.0/0025-bcm47xx-read-nvram-from-sflash.patch
deleted file mode 100644
index d3781b8fe5..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0025-bcm47xx-read-nvram-from-sflash.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 1d693b2c9d5943cbe938f879041b837cd004737f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 23 Jul 2011 18:29:38 +0200
-Subject: [PATCH 25/26] bcm47xx: read nvram from sflash
-
-bcm47xx: add sflash support to nvram
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/nvram.c | 86 +++++++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 84 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -20,11 +20,12 @@
- #include <asm/addrspace.h>
- #include <asm/mach-bcm47xx/nvram.h>
- #include <asm/mach-bcm47xx/bcm47xx.h>
-+#include <asm/mach-bcm47xx/bus.h>
-
- static char nvram_buf[NVRAM_SPACE];
-
- /* Probe for NVRAM header */
--static void early_nvram_init(void)
-+static void early_nvram_init_pflash(void)
- {
- #ifdef CONFIG_BCM47XX_SSB
- struct ssb_chipcommon *ssb_cc;
-@@ -86,7 +87,88 @@ found:
- for (i = 0; i < sizeof(struct nvram_header); i += 4)
- *dst++ = *src++;
- for (; i < header->len && i < NVRAM_SPACE; i += 4)
-- *dst++ = le32_to_cpu(*src++);
-+ *dst++ = *src++;
-+}
-+
-+static int early_nvram_init_sflash(void)
-+{
-+ struct nvram_header header;
-+ u32 off;
-+ int ret;
-+ char *dst;
-+ int len;
-+
-+ /* check if the struct is already initilized */
-+ if (!bcm47xx_sflash.size)
-+ return -1;
-+
-+ off = FLASH_MIN;
-+ while (off <= bcm47xx_sflash.size) {
-+ ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - NVRAM_SPACE, sizeof(header), (u8 *)&header);
-+ if (ret != sizeof(header))
-+ return ret;
-+ if (header.magic == NVRAM_HEADER)
-+ goto found;
-+ off <<= 1;
-+ }
-+
-+ off = FLASH_MIN;
-+ while (off <= bcm47xx_sflash.size) {
-+ ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - (2 * NVRAM_SPACE), sizeof(header), (u8 *)&header);
-+ if (ret != sizeof(header))
-+ return ret;
-+ if (header.magic == NVRAM_HEADER)
-+ goto found;
-+ off <<= 1;
-+ }
-+ return -1;
-+
-+found:
-+ len = NVRAM_SPACE;
-+ dst = nvram_buf;
-+ while (len) {
-+ ret = bcm47xx_sflash.read(&bcm47xx_sflash, off - (2 * NVRAM_SPACE), len, dst);
-+ if (ret < 0)
-+ return ret;
-+ off += ret;
-+ len -= ret;
-+ dst += ret;
-+ }
-+ return 0;
-+}
-+
-+static void early_nvram_init(void)
-+{
-+ int err = 0;
-+
-+ switch (bcm47xx_bus_type) {
-+#ifdef CONFIG_BCM47XX_SSB
-+ case BCM47XX_BUS_TYPE_SSB:
-+ if (bcm47xx_bus.ssb.chipco.flash_type == SSB_PFLASH) {
-+ early_nvram_init_pflash();
-+ } else if (bcm47xx_bus.ssb.chipco.flash_type == SSB_SFLASH) {
-+ err = early_nvram_init_sflash();
-+ if (err < 0)
-+ printk(KERN_WARNING "can not read from flash: %i\n", err);
-+ } else {
-+ printk(KERN_WARNING "unknow flash type\n");
-+ }
-+ break;
-+#endif
-+#ifdef CONFIG_BCM47XX_BCMA
-+ case BCM47XX_BUS_TYPE_BCMA:
-+ if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_PFLASH) {
-+ early_nvram_init_pflash();
-+ } else if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_SFLASH) {
-+ err = early_nvram_init_sflash();
-+ if (err < 0)
-+ printk(KERN_WARNING "can not read from flash: %i\n", err);
-+ } else {
-+ printk(KERN_WARNING "unknow flash type\n");
-+ }
-+ break;
-+#endif
-+ }
- }
-
- int nvram_getenv(char *name, char *val, size_t val_len)
diff --git a/target/linux/brcm47xx/patches-3.0/0026-bcma-export-needed-gpio-functions.patch b/target/linux/brcm47xx/patches-3.0/0026-bcma-export-needed-gpio-functions.patch
deleted file mode 100644
index 7c8cd79635..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0026-bcma-export-needed-gpio-functions.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From f6e41db3ee7ead99e1398def222c14893fc265de Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 4 Aug 2011 21:09:48 +0200
-Subject: [PATCH 26/26] bcma: export needed gpio functions
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/driver_chipcommon.c | 5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -80,16 +80,19 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
- {
- return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_in);
-
- u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
-
- u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
-
- u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
-@@ -101,11 +104,13 @@ u32 bcma_chipco_gpio_intmask(struct bcma
- {
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_intmask);
-
- u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
- {
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
- }
-+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_polarity);
-
- #ifdef CONFIG_BCMA_DRIVER_MIPS
- void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
diff --git a/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch b/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch
deleted file mode 100644
index d74dfcb73e..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0028-bcma-scan-for-extra-address-space.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 1735daf1db79d338dccfc55444b52ed52af79e86 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 20 Nov 2011 18:22:35 +0100
-Subject: [PATCH 15/21] bcma: scan for extra address space
-
-Some cores like the USB core have two address spaces. In the USB host
-controller one address space is used for the OHCI and the other for the
-EHCI controller interface. The USB controller is the only core I found
-with two address spaces. This code is based on the AI scan function
-ai_scan() in shared/aiutils.c i the Broadcom SDK.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/scan.c | 17 ++++++++++++++++-
- include/linux/bcma/bcma.h | 1 +
- 2 files changed, 17 insertions(+), 1 deletions(-)
-
---- a/drivers/bcma/scan.c
-+++ b/drivers/bcma/scan.c
-@@ -286,6 +286,21 @@ static int bcma_get_next_core(struct bcm
- return -EILSEQ;
- }
-
-+
-+ /* First Slave Address Descriptor should be port 0:
-+ * the main register space for the core
-+ */
-+ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
-+ if (tmp < 0) {
-+ /* Try again to see if it is a bridge */
-+ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_BRIDGE, 0);
-+ if (tmp) {
-+ printk("found bridge\n");
-+ }
-+
-+ }
-+ core->addr = tmp;
-+
- /* get & parse slave ports */
- for (i = 0; i < ports[1]; i++) {
- for (j = 0; ; j++) {
-@@ -298,7 +313,7 @@ static int bcma_get_next_core(struct bcm
- break;
- } else {
- if (i == 0 && j == 0)
-- core->addr = tmp;
-+ core->addr1 = tmp;
- }
- }
- }
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -138,6 +138,7 @@ struct bcma_device {
- u8 core_index;
-
- u32 addr;
-+ u32 addr1;
- u32 wrap;
-
- void __iomem *io_addr;
diff --git a/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch b/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch
deleted file mode 100644
index 2c0462fea3..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0029-bcma-add-function-to-check-every-10-s-if-a-reg-is-se.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 6e8ae6e2cee0e7e5939dc7042584c808366e61e0 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 27 Nov 2011 14:01:01 +0100
-Subject: [PATCH 16/21] =?UTF-8?q?bcma:=20add=20function=20to=20check=20every?=
- =?UTF-8?q?=2010=20=C2=B5s=20if=20a=20reg=20is=20set?=
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This function checks if a reg get set or cleared every 10 microseconds.
-It is used in bcma_core_set_clockmode() and bcma_core_pll_ctl() to
-reduce code duplication. In addition it is needed in the USB host
-driver.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/core.c | 48 ++++++++++++++++++++++++++++----------------
- include/linux/bcma/bcma.h | 2 +
- 2 files changed, 32 insertions(+), 18 deletions(-)
-
---- a/drivers/bcma/core.c
-+++ b/drivers/bcma/core.c
-@@ -51,11 +51,36 @@ int bcma_core_enable(struct bcma_device
- }
- EXPORT_SYMBOL_GPL(bcma_core_enable);
-
-+/* Wait for bitmask in a register to get set or cleared.
-+ * timeout is in units of ten-microseconds.
-+ */
-+int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, int timeout,
-+ int set)
-+{
-+ int i;
-+ u32 val;
-+
-+ for (i = 0; i < timeout; i++) {
-+ val = bcma_read32(dev, reg);
-+ if (set) {
-+ if ((val & bitmask) == bitmask)
-+ return 0;
-+ } else {
-+ if (!(val & bitmask))
-+ return 0;
-+ }
-+ udelay(10);
-+ }
-+ pr_err("Timeout waiting for bitmask %08X on register %04X to %s.\n",
-+ bitmask, reg, (set ? "set" : "clear"));
-+
-+ return -ETIMEDOUT;
-+}
-+EXPORT_SYMBOL_GPL(bcma_wait_bits);
-+
- void bcma_core_set_clockmode(struct bcma_device *core,
- enum bcma_clkmode clkmode)
- {
-- u16 i;
--
- WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON &&
- core->id.id != BCMA_CORE_PCIE &&
- core->id.id != BCMA_CORE_80211);
-@@ -64,15 +89,8 @@ void bcma_core_set_clockmode(struct bcma
- case BCMA_CLKMODE_FAST:
- bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
- udelay(64);
-- for (i = 0; i < 1500; i++) {
-- if (bcma_read32(core, BCMA_CLKCTLST) &
-- BCMA_CLKCTLST_HAVEHT) {
-- i = 0;
-- break;
-- }
-- udelay(10);
-- }
-- if (i)
-+ if (bcma_wait_bits(core, BCMA_CLKCTLST, BCMA_CLKCTLST_HAVEHT,
-+ 1500, 1))
- pr_err("HT force timeout\n");
- break;
- case BCMA_CLKMODE_DYNAMIC:
-@@ -84,22 +102,12 @@ EXPORT_SYMBOL_GPL(bcma_core_set_clockmod
-
- void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on)
- {
-- u16 i;
--
- WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ);
- WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST);
-
- if (on) {
- bcma_set32(core, BCMA_CLKCTLST, req);
-- for (i = 0; i < 10000; i++) {
-- if ((bcma_read32(core, BCMA_CLKCTLST) & status) ==
-- status) {
-- i = 0;
-- break;
-- }
-- udelay(10);
-- }
-- if (i)
-+ if (bcma_wait_bits(core, BCMA_CLKCTLST, status, 10000, 1))
- pr_err("PLL enable timeout\n");
- } else {
- pr_warn("Disabling PLL not supported yet!\n");
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -283,6 +283,9 @@ static inline void bcma_maskset16(struct
- bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
- }
-
-+extern int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
-+ int timeout, int set);
-+
- extern bool bcma_core_is_enabled(struct bcma_device *core);
- extern void bcma_core_disable(struct bcma_device *core, u32 flags);
- extern int bcma_core_enable(struct bcma_device *core, u32 flags);
diff --git a/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch b/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch
deleted file mode 100644
index 6f22aa0508..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0030-USB-OHCI-Add-a-generic-platform-device-driver.patch
+++ /dev/null
@@ -1,291 +0,0 @@
-From b39adeae5b06e40699c174ed78ca7c45b8d7976f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:20:54 +0100
-Subject: [PATCH 17/21] USB: OHCI: Add a generic platform device driver
-
-This adds a generic driver for platform devices. It works like the PCI
-driver and is based on it. This is for devices which do not have an own
-bus but their OHCI controller works like a PCI controller. It will be
-used for the Broadcom bcma and ssb USB OHCI controller.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig | 10 ++
- drivers/usb/host/ohci-hcd.c | 21 ++++-
- drivers/usb/host/ohci-platform.c | 197 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 227 insertions(+), 1 deletions(-)
- create mode 100644 drivers/usb/host/ohci-platform.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -378,6 +378,16 @@ config USB_CNS3XXX_OHCI
- Enable support for the CNS3XXX SOC's on-chip OHCI controller.
- It is needed for low-speed USB 1.0 device support.
-
-+config USB_OHCI_HCD_PLATFORM
-+ bool "OHCI driver for a platform device"
-+ depends on USB_OHCI_HCD && EXPERIMENTAL
-+ default n
-+ ---help---
-+ Adds an OHCI host driver for a generic platform device, which
-+ provieds a memory space and an irq.
-+
-+ If unsure, say N.
-+
- config USB_OHCI_BIG_ENDIAN_DESC
- bool
- depends on USB_OHCI_HCD
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1111,6 +1111,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ohci_hcd_ath79_driver
- #endif
-
-+#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
-+#include "ohci-platform.c"
-+#define PLATFORM_OHCI_DRIVER ohci_platform_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OMAP1_PLATFORM_DRIVER) && \
-@@ -1120,7 +1125,8 @@ MODULE_LICENSE ("GPL");
- !defined(PS3_SYSTEM_BUS_DRIVER) && \
- !defined(SM501_OHCI_DRIVER) && \
- !defined(TMIO_OHCI_DRIVER) && \
-- !defined(SSB_OHCI_DRIVER)
-+ !defined(SSB_OHCI_DRIVER) && \
-+ !defined(PLATFORM_OHCI_DRIVER)
- #error "missing bus glue for ohci-hcd"
- #endif
-
-@@ -1204,9 +1210,19 @@ static int __init ohci_hcd_mod_init(void
- goto error_tmio;
- #endif
-
-+#ifdef PLATFORM_OHCI_DRIVER
-+ retval = platform_driver_register(&PLATFORM_OHCI_DRIVER);
-+ if (retval)
-+ goto error_platform;
-+#endif
-+
- return retval;
-
- /* Error path */
-+#ifdef PLATFORM_OHCI_DRIVER
-+ platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
-+ error_platform:
-+#endif
- #ifdef TMIO_OHCI_DRIVER
- platform_driver_unregister(&TMIO_OHCI_DRIVER);
- error_tmio:
-@@ -1260,6 +1276,9 @@ module_init(ohci_hcd_mod_init);
-
- static void __exit ohci_hcd_mod_exit(void)
- {
-+#ifdef PLATFORM_OHCI_DRIVER
-+ platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
-+#endif
- #ifdef TMIO_OHCI_DRIVER
- platform_driver_unregister(&TMIO_OHCI_DRIVER);
- #endif
---- /dev/null
-+++ b/drivers/usb/host/ohci-platform.c
-@@ -0,0 +1,197 @@
-+/*
-+ * Generic platform ohci driver
-+ *
-+ * Copyright 2007 Michael Buesch <m@bues.ch>
-+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/platform_device.h>
-+
-+static int ohci_platform_reset(struct usb_hcd *hcd)
-+{
-+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+ int err;
-+
-+ ohci_hcd_init(ohci);
-+ err = ohci_init(ohci);
-+
-+ return err;
-+}
-+
-+static int ohci_platform_start(struct usb_hcd *hcd)
-+{
-+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+ int err;
-+
-+ err = ohci_run(ohci);
-+ if (err < 0) {
-+ ohci_err(ohci, "can't start\n");
-+ ohci_stop(hcd);
-+ }
-+
-+ return err;
-+}
-+
-+static const struct hc_driver ohci_platform_hc_driver = {
-+ .description = "platform-usb-ohci",
-+ .product_desc = "Generic Platform OHCI Controller",
-+ .hcd_priv_size = sizeof(struct ohci_hcd),
-+
-+ .irq = ohci_irq,
-+ .flags = HCD_MEMORY | HCD_USB11,
-+
-+ .reset = ohci_platform_reset,
-+ .start = ohci_platform_start,
-+ .stop = ohci_stop,
-+ .shutdown = ohci_shutdown,
-+
-+ .urb_enqueue = ohci_urb_enqueue,
-+ .urb_dequeue = ohci_urb_dequeue,
-+ .endpoint_disable = ohci_endpoint_disable,
-+
-+ .get_frame_number = ohci_get_frame,
-+
-+ .hub_status_data = ohci_hub_status_data,
-+ .hub_control = ohci_hub_control,
-+#ifdef CONFIG_PM
-+ .bus_suspend = ohci_bus_suspend,
-+ .bus_resume = ohci_bus_resume,
-+#endif
-+
-+ .start_port_reset = ohci_start_port_reset,
-+};
-+
-+static int ohci_platform_attach(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+ struct resource *res_irq, *res_mem;
-+ int err = -ENOMEM;
-+
-+ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
-+ dev_name(&dev->dev));
-+ if (!hcd)
-+ goto err_return;
-+
-+ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
-+ if (!res_irq) {
-+ err = -ENXIO;
-+ goto err_return;
-+ }
-+ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+ if (!res_mem) {
-+ err = -ENXIO;
-+ goto err_return;
-+ }
-+ hcd->rsrc_start = res_mem->start;
-+ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs)
-+ goto err_put_hcd;
-+ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
-+ if (err)
-+ goto err_iounmap;
-+
-+ platform_set_drvdata(dev, hcd);
-+
-+ return err;
-+
-+err_iounmap:
-+ iounmap(hcd->regs);
-+err_put_hcd:
-+ usb_put_hcd(hcd);
-+err_return:
-+ return err;
-+}
-+
-+static int ohci_platform_probe(struct platform_device *dev)
-+{
-+ int err;
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ /* We currently always attach BCMA_DEV_USB11_HOSTDEV
-+ * as HOST OHCI. If we want to attach it as Client device,
-+ * we must branch here and call into the (yet to
-+ * be written) Client mode driver. Same for remove(). */
-+
-+ err = ohci_platform_attach(dev);
-+
-+ return err;
-+}
-+
-+static int ohci_platform_remove(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(dev);
-+ if (!hcd)
-+ return -ENODEV;
-+
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ usb_put_hcd(hcd);
-+
-+ return 0;
-+}
-+
-+static void ohci_platform_shutdown(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(dev);
-+ if (!hcd)
-+ return;
-+
-+ if (hcd->driver->shutdown)
-+ hcd->driver->shutdown(hcd);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ohci_platform_suspend(struct platform_device *dev,
-+ pm_message_t state)
-+{
-+
-+ return 0;
-+}
-+
-+static int ohci_platform_resume(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(dev);
-+
-+ ohci_finish_controller_resume(hcd);
-+ return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ohci_platform_suspend NULL
-+#define ohci_platform_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct platform_device_id ohci_platform_table[] = {
-+ { "ohci-platform", 0 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(platform, ohci_platform_table);
-+
-+static struct platform_driver ohci_platform_driver = {
-+ .id_table = ohci_platform_table,
-+ .probe = ohci_platform_probe,
-+ .remove = ohci_platform_remove,
-+ .shutdown = ohci_platform_shutdown,
-+ .suspend = ohci_platform_suspend,
-+ .resume = ohci_platform_resume,
-+ .driver = {
-+ .name = "ohci-platform",
-+ }
-+};
diff --git a/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch b/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch
deleted file mode 100644
index 43cf86a2b1..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0031-USB-EHCI-Add-a-generic-platform-device-driver.patch
+++ /dev/null
@@ -1,265 +0,0 @@
-From aa05e0048cec25719921291e8749674b8cc66fc0 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:28:56 +0100
-Subject: [PATCH 18/21] USB: EHCI: Add a generic platform device driver
-
-This adds a generic driver for platform devices. It works like the PCI
-driver and is based on it. This is for devices which do not have an own
-bus but their EHCI controller works like a PCI controller. It will be
-used for the Broadcom bcma and ssb USB EHCI controller.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig | 10 ++
- drivers/usb/host/ehci-hcd.c | 5 +
- drivers/usb/host/ehci-platform.c | 211 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 226 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ehci-platform.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -388,6 +388,16 @@ config USB_OHCI_HCD_PLATFORM
-
- If unsure, say N.
-
-+config USB_EHCI_HCD_PLATFORM
-+ bool "Generic EHCI driver for a platform device"
-+ depends on USB_EHCI_HCD && EXPERIMENTAL
-+ default n
-+ ---help---
-+ Adds an EHCI host driver for a generic platform device, which
-+ provieds a memory space and an irq.
-+
-+ If unsure, say N.
-+
- config USB_OHCI_BIG_ENDIAN_DESC
- bool
- depends on USB_OHCI_HCD
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1312,6 +1312,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ehci_grlib_driver
- #endif
-
-+#ifdef CONFIG_USB_EHCI_HCD_PLATFORM
-+#include "ehci-platform.c"
-+#define PLATFORM_DRIVER ehci_platform_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
---- /dev/null
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -0,0 +1,211 @@
-+/*
-+ * Generic platform ehci driver
-+ *
-+ * Copyright 2007 Steven Brown <sbrown@cortland.com>
-+ * Copyright 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Derived from the ohci-ssb driver
-+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
-+ *
-+ * Derived from the EHCI-PCI driver
-+ * Copyright (c) 2000-2004 by David Brownell
-+ *
-+ * Derived from the ohci-pci driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/platform_device.h>
-+
-+static int ehci_platform_reset(struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ int retval;
-+
-+ ehci->caps = hcd->regs;
-+ ehci->regs = hcd->regs +
-+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-+
-+ dbg_hcs_params(ehci, "reset");
-+ dbg_hcc_params(ehci, "reset");
-+
-+ /* cache this readonly data; minimize chip reads */
-+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+
-+ retval = ehci_halt(ehci);
-+ if (retval)
-+ return retval;
-+
-+ /* data structure init */
-+ retval = ehci_init(hcd);
-+ if (retval)
-+ return retval;
-+
-+ ehci_reset(ehci);
-+
-+ ehci_port_power(ehci, 1);
-+
-+ return retval;
-+}
-+
-+static const struct hc_driver ehci_platform_hc_driver = {
-+ .description = "platform-usb-ehci",
-+ .product_desc = "Generic Platform EHCI Controller",
-+ .hcd_priv_size = sizeof(struct ehci_hcd),
-+
-+ .irq = ehci_irq,
-+ .flags = HCD_MEMORY | HCD_USB2,
-+
-+ .reset = ehci_platform_reset,
-+ .start = ehci_run,
-+ .stop = ehci_stop,
-+ .shutdown = ehci_shutdown,
-+
-+ .urb_enqueue = ehci_urb_enqueue,
-+ .urb_dequeue = ehci_urb_dequeue,
-+ .endpoint_disable = ehci_endpoint_disable,
-+ .endpoint_reset = ehci_endpoint_reset,
-+
-+ .get_frame_number = ehci_get_frame,
-+
-+ .hub_status_data = ehci_hub_status_data,
-+ .hub_control = ehci_hub_control,
-+#if defined(CONFIG_PM)
-+ .bus_suspend = ehci_bus_suspend,
-+ .bus_resume = ehci_bus_resume,
-+#endif
-+ .relinquish_port = ehci_relinquish_port,
-+ .port_handed_over = ehci_port_handed_over,
-+
-+ .update_device = ehci_update_device,
-+
-+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-+};
-+
-+static int ehci_platform_attach(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+ struct resource *res_irq, *res_mem;
-+ int err = -ENOMEM;
-+
-+ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
-+ dev_name(&dev->dev));
-+ if (!hcd)
-+ goto err_return;
-+
-+ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
-+ if (!res_irq) {
-+ err = -ENXIO;
-+ goto err_return;
-+ }
-+ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+ if (!res_mem) {
-+ err = -ENXIO;
-+ goto err_return;
-+ }
-+ hcd->rsrc_start = res_mem->start;
-+ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+ /*
-+ * start & size modified per sbutils.c
-+ */
-+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs)
-+ goto err_put_hcd;
-+ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
-+ if (err)
-+ goto err_iounmap;
-+
-+ platform_set_drvdata(dev, hcd);
-+
-+ return err;
-+
-+err_iounmap:
-+ iounmap(hcd->regs);
-+err_put_hcd:
-+ usb_put_hcd(hcd);
-+err_return:
-+ return err;
-+}
-+
-+static int ehci_platform_probe(struct platform_device *dev)
-+{
-+ int err;
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ err = ehci_platform_attach(dev);
-+
-+ return err;
-+}
-+
-+static int ehci_platform_remove(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(dev);
-+ if (!hcd)
-+ return -ENODEV;
-+
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ usb_put_hcd(hcd);
-+
-+ return 0;
-+}
-+
-+static void ehci_platform_shutdown(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(dev);
-+ if (!hcd)
-+ return;
-+
-+ if (hcd->driver->shutdown)
-+ hcd->driver->shutdown(hcd);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ehci_platform_suspend(struct platform_device *dev,
-+ pm_message_t state)
-+{
-+ return 0;
-+}
-+
-+static int ehci_platform_resume(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(dev);
-+
-+ ehci_finish_controller_resume(hcd);
-+ return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ehci_platform_suspend NULL
-+#define ehci_platform_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct platform_device_id ehci_platform_table[] = {
-+ { "ehci-platform", 0 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(platform, ehci_platform_table);
-+
-+static struct platform_driver ehci_platform_driver = {
-+ .id_table = ehci_platform_table,
-+ .probe = ehci_platform_probe,
-+ .remove = ehci_platform_remove,
-+ .shutdown = ehci_platform_shutdown,
-+ .suspend = ehci_platform_suspend,
-+ .resume = ehci_platform_resume,
-+ .driver = {
-+ .name = "ehci-platform",
-+ }
-+};
diff --git a/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch b/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch
deleted file mode 100644
index e2a2f1e474..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0032-USB-Add-driver-for-the-bcma-bus.patch
+++ /dev/null
@@ -1,358 +0,0 @@
-From 4ea647c5a257d57eaf230f783e54b2c0232852b8 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:33:41 +0100
-Subject: [PATCH 19/26] USB: Add driver for the bcma bus
-
-This adds a USB driver using the generic platform device driver for the
-USB controller found on the Broadcom bcma bus. The bcma bus just
-exposes one device which serves the OHCI and the EHCI controller at the
-same time. This driver probes for this USB controller and creates and
-registers two new platform devices which will be probed by the new
-generic platform device driver. This makes it possible to use the EHCI
-and the OCHI controller on the bcma bus at the same time.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig | 12 ++
- drivers/usb/host/Makefile | 1 +
- drivers/usb/host/bcma-hcd.c | 309 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 322 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/bcma-hcd.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -598,3 +598,15 @@ config USB_OCTEON_OHCI
- config USB_OCTEON2_COMMON
- bool
- default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
-+
-+config USB_HCD_BCMA
-+ tristate "BCMA usb host driver"
-+ depends on BCMA && EXPERIMENTAL
-+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
-+ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
-+ help
-+ Enbale support for the EHCI and OCHI host controller on an bcma bus.
-+ It converts the bcma driver into two platform device drivers
-+ for ehci and ohci.
-+
-+ If unsure, say N.
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -35,3 +35,4 @@ obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
- obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
- obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
- obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
-+obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
---- /dev/null
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -0,0 +1,309 @@
-+/*
-+ * Broadcom specific Advanced Microcontroller Bus
-+ * Broadcom USB-core driver (BCMA bus glue)
-+ *
-+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Based on ssb-ohci driver
-+ * Copyright 2007 Michael Buesch <m@bues.ch>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Derived from the USBcore related parts of Broadcom-SB
-+ * Copyright 2005-2011 Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/bcma/bcma.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+
-+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
-+MODULE_LICENSE("GPL");
-+
-+struct bcma_hcd_device {
-+ struct platform_device *ehci_dev;
-+ struct platform_device *ohci_dev;
-+};
-+
-+static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
-+{
-+#ifdef CONFIG_BCMA_DRIVER_MIPS
-+ /* Work around for 4716 failures. */
-+ if (dev->bus->chipinfo.id == 0x4716) {
-+ u32 tmp;
-+
-+ tmp = bcma_cpu_clock(&dev->bus->drv_mips);
-+ if (tmp >= 480000000)
-+ tmp = 0x1846b; /* set CDR to 0x11(fast) */
-+ else if (tmp == 453000000)
-+ tmp = 0x1046b; /* set CDR to 0x10(slow) */
-+ else
-+ tmp = 0;
-+
-+ /* Change Shim mdio control reg to fix host not acking at
-+ * high frequencies
-+ */
-+ if (tmp) {
-+ bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
-+ udelay(500);
-+
-+ bcma_write32(dev, 0x524, tmp);
-+ udelay(500);
-+ bcma_write32(dev, 0x524, 0x4ab);
-+ udelay(500);
-+ bcma_read32(dev, 0x528);
-+ bcma_write32(dev, 0x528, 0x80000000);
-+ }
-+ }
-+#endif /* CONFIG_BCMA_DRIVER_MIPS */
-+}
-+
-+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-+static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
-+{
-+ u32 tmp;
-+
-+ /*
-+ * USB 2.0 special considerations:
-+ *
-+ * 1. Since the core supports both OHCI and EHCI functions, it must
-+ * only be reset once.
-+ *
-+ * 2. In addition to the standard SI reset sequence, the Host Control
-+ * Register must be programmed to bring the USB core and various
-+ * phy components out of reset.
-+ */
-+ if (!bcma_core_is_enabled(dev)) {
-+ bcma_core_enable(dev, 0);
-+ mdelay(10);
-+ if (dev->id.rev >= 5) {
-+ /* Enable Misc PLL */
-+ tmp = bcma_read32(dev, 0x1e0);
-+ tmp |= 0x100;
-+ bcma_write32(dev, 0x1e0, tmp);
-+ if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100, 1))
-+ printk(KERN_EMERG "Failed to enable misc PPL!\n");
-+
-+ /* Take out of resets */
-+ bcma_write32(dev, 0x200, 0x4ff);
-+ udelay(25);
-+ bcma_write32(dev, 0x200, 0x6ff);
-+ udelay(25);
-+
-+ /* Make sure digital and AFE are locked in USB PHY */
-+ bcma_write32(dev, 0x524, 0x6b);
-+ udelay(50);
-+ tmp = bcma_read32(dev, 0x524);
-+ udelay(50);
-+ bcma_write32(dev, 0x524, 0xab);
-+ udelay(50);
-+ tmp = bcma_read32(dev, 0x524);
-+ udelay(50);
-+ bcma_write32(dev, 0x524, 0x2b);
-+ udelay(50);
-+ tmp = bcma_read32(dev, 0x524);
-+ udelay(50);
-+ bcma_write32(dev, 0x524, 0x10ab);
-+ udelay(50);
-+ tmp = bcma_read32(dev, 0x524);
-+
-+ if (bcma_wait_bits(dev, 0x528, 0xc000, 10000, 1)) {
-+ tmp = bcma_read32(dev, 0x528);
-+ printk(KERN_EMERG
-+ "USB20H mdio_rddata 0x%08x\n", tmp);
-+ }
-+ bcma_write32(dev, 0x528, 0x80000000);
-+ tmp = bcma_read32(dev, 0x314);
-+ udelay(265);
-+ bcma_write32(dev, 0x200, 0x7ff);
-+ udelay(10);
-+
-+ /* Take USB and HSIC out of non-driving modes */
-+ bcma_write32(dev, 0x510, 0);
-+ } else {
-+ bcma_write32(dev, 0x200, 0x7ff);
-+
-+ udelay(1);
-+ }
-+
-+ bcma_hcd_4716wa(dev);
-+ }
-+}
-+
-+static struct platform_device * __devinit
-+bcma_hcd_create_pdev(struct bcma_device *dev, char *name, u32 addr)
-+{
-+ struct platform_device *hci_dev;
-+ struct resource hci_res[2];
-+ int ret = -ENOMEM;
-+
-+ memset(hci_res, 0, sizeof(hci_res));
-+
-+ hci_res[0].start = addr;
-+ hci_res[0].end = hci_res[0].start + 0x1000 - 1;
-+ hci_res[0].flags = IORESOURCE_MEM;
-+
-+ hci_res[1].start = dev->irq;
-+ hci_res[1].flags = IORESOURCE_IRQ;
-+
-+ hci_dev = platform_device_alloc(name, 0);
-+ if (!hci_dev)
-+ goto err_alloc;
-+
-+ hci_dev->dev.parent = &dev->dev;
-+ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
-+
-+ ret = platform_device_add_resources(hci_dev, hci_res,
-+ ARRAY_SIZE(hci_res));
-+ if (ret)
-+ goto err_alloc;
-+
-+ ret = platform_device_add(hci_dev);
-+ if (ret) {
-+err_alloc:
-+ platform_device_put(hci_dev);
-+ return ERR_PTR(ret);
-+ }
-+
-+ return hci_dev;
-+}
-+
-+static int __devinit bcma_hcd_probe(struct bcma_device *dev)
-+{
-+ int err;
-+ u16 chipid_top;
-+ u32 ohci_addr;
-+ struct bcma_hcd_device *usb_dev;
-+ struct bcma_chipinfo *chipinfo;
-+
-+ chipinfo = &dev->bus->chipinfo;
-+ /* USBcores are only connected on embedded devices. */
-+ chipid_top = (chipinfo->id & 0xFF00);
-+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+ return -ENODEV;
-+
-+ /* TODO: Probably need checks here; is the core connected? */
-+
-+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-+ return -EOPNOTSUPP;
-+
-+ usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
-+ if (!usb_dev)
-+ return -ENOMEM;
-+
-+ bcma_hcd_init_chip(dev);
-+
-+ /* In AI chips EHCI is addrspace 0, OHCI is 1 */
-+ ohci_addr = dev->addr1;
-+ if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
-+ && chipinfo->rev == 0)
-+ ohci_addr = 0x18009000;
-+
-+ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
-+ ohci_addr);
-+ if (IS_ERR(usb_dev->ohci_dev)) {
-+ err = PTR_ERR(usb_dev->ohci_dev);
-+ goto err_free_usb_dev;
-+ }
-+
-+ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
-+ dev->addr);
-+ if (IS_ERR(usb_dev->ehci_dev)) {
-+ err = PTR_ERR(usb_dev->ehci_dev);
-+ goto err_unregister_ohci_dev;
-+ }
-+
-+ bcma_set_drvdata(dev, usb_dev);
-+ return 0;
-+
-+err_unregister_ohci_dev:
-+ platform_device_unregister(usb_dev->ohci_dev);
-+err_free_usb_dev:
-+ kfree(usb_dev);
-+ return err;
-+}
-+
-+static void __devexit bcma_hcd_remove(struct bcma_device *dev)
-+{
-+ struct bcma_hcd_device *usb_dev;
-+ struct platform_device *ohci_dev;
-+ struct platform_device *ehci_dev;
-+
-+ usb_dev = bcma_get_drvdata(dev);
-+ if (!usb_dev)
-+ return;
-+
-+ ohci_dev = usb_dev->ohci_dev;
-+ ehci_dev = usb_dev->ehci_dev;
-+
-+ if (ohci_dev) {
-+ platform_device_unregister(ohci_dev);
-+ }
-+ if (ehci_dev) {
-+ platform_device_unregister(ehci_dev);
-+ }
-+
-+ bcma_core_disable(dev, 0);
-+}
-+
-+static void bcma_hcd_shutdown(struct bcma_device *dev)
-+{
-+ bcma_core_disable(dev, 0);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state)
-+{
-+ bcma_core_disable(dev, 0);
-+
-+ return 0;
-+}
-+
-+static int bcma_hcd_resume(struct bcma_device *dev)
-+{
-+ bcma_core_enable(dev, 0);
-+
-+ return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define bcma_hcd_suspend NULL
-+#define bcma_hcd_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
-+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+ BCMA_CORETABLE_END
-+};
-+MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
-+
-+static struct bcma_driver bcma_hcd_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = bcma_hcd_table,
-+ .probe = bcma_hcd_probe,
-+ .remove = __devexit_p(bcma_hcd_remove),
-+ .shutdown = bcma_hcd_shutdown,
-+ .suspend = bcma_hcd_suspend,
-+ .resume = bcma_hcd_resume,
-+};
-+
-+static int __init bcma_hcd_init(void)
-+{
-+ return bcma_driver_register(&bcma_hcd_driver);
-+}
-+module_init(bcma_hcd_init);
-+
-+static void __exit bcma_hcd_exit(void)
-+{
-+ bcma_driver_unregister(&bcma_hcd_driver);
-+}
-+module_exit(bcma_hcd_exit);
diff --git a/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch b/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch
deleted file mode 100644
index 91b6c9cbca..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0033-USB-Add-driver-for-the-ssb-bus.patch
+++ /dev/null
@@ -1,325 +0,0 @@
-From 0f91c21de577d2d9f1fd164ca686d9a4ff0e2c8b Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:35:17 +0100
-Subject: [PATCH 20/26] USB: Add driver for the ssb bus
-
-This adds a USB driver using the generic platform device driver for the
-USB controller found on the Broadcom ssb bus. The ssb bus just
-exposes one device which serves the OHCI and the EHCI controller at the
-same time. This driver probes for this USB controller and creates and
-registers two new platform devices which will be probed by the new
-generic platform device driver. This makes it possible to use the EHCI
-and the OCHI controller on the ssb bus at the same time.
-
-The old ssb OHCI USB driver will be removed in the next step as this
-driver also provide an OHCI driver and an EHCI for the cores supporting
-it.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig | 12 ++
- drivers/usb/host/Makefile | 1 +
- drivers/usb/host/ssb-hcd.c | 272 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 285 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ssb-hcd.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -610,3 +610,15 @@ config USB_HCD_BCMA
- for ehci and ohci.
-
- If unsure, say N.
-+
-+config USB_HCD_SSB
-+ tristate "SSB usb host driver"
-+ depends on SSB && EXPERIMENTAL
-+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
-+ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
-+ help
-+ Enbale support for the EHCI and OCHI host controller on an bcma bus.
-+ It converts the bcma driver into two platform device drivers
-+ for ehci and ohci.
-+
-+ If unsure, say N.
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -36,3 +36,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd
- obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
- obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
- obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
-+obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
---- /dev/null
-+++ b/drivers/usb/host/ssb-hcd.c
-@@ -0,0 +1,272 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom USB-core driver (SSB bus glue)
-+ *
-+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Based on ssb-ohci driver
-+ * Copyright 2007 Michael Buesch <m@bues.ch>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Derived from the USBcore related parts of Broadcom-SB
-+ * Copyright 2005-2011 Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/ssb/ssb.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+
-+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("Common USB driver for SSB Bus");
-+MODULE_LICENSE("GPL");
-+
-+#define SSB_HCD_TMSLOW_HOSTMODE (1 << 29)
-+
-+struct ssb_hcd_device {
-+ struct platform_device *ehci_dev;
-+ struct platform_device *ohci_dev;
-+
-+ u32 enable_flags;
-+};
-+
-+static void __devinit ssb_hcd_5354wa(struct ssb_device *dev)
-+{
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+ /* Work around for 5354 failures */
-+ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-+ /* Change syn01 reg */
-+ ssb_write32(dev, 0x894, 0x00fe00fe);
-+
-+ /* Change syn03 reg */
-+ ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1);
-+ }
-+#endif
-+}
-+
-+static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev)
-+{
-+ if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+ /*
-+ * USB 2.0 special considerations:
-+ *
-+ * In addition to the standard SSB reset sequence, the Host
-+ * Control Register must be programmed to bring the USB core
-+ * and various phy components out of reset.
-+ */
-+ ssb_write32(dev, 0x200, 0x7ff);
-+
-+ /* Change Flush control reg */
-+ ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
-+ ssb_read32(dev, 0x400);
-+
-+ /* Change Shim control reg */
-+ ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
-+ ssb_read32(dev, 0x304);
-+
-+ udelay(1);
-+
-+ ssb_hcd_5354wa(dev);
-+ }
-+}
-+
-+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-+static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev)
-+{
-+ u32 flags = 0;
-+
-+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-+ /* Put the device into host-mode. */
-+ flags |= SSB_HCD_TMSLOW_HOSTMODE;
-+
-+ ssb_device_enable(dev, flags);
-+
-+ ssb_hcd_usb20wa(dev);
-+
-+ return flags;
-+}
-+
-+static struct platform_device * __devinit
-+ssb_hcd_create_pdev(struct ssb_device *dev, char *name, u32 addr, u32 len)
-+{
-+ struct platform_device *hci_dev;
-+ struct resource hci_res[2];
-+ int ret = -ENOMEM;
-+
-+ memset(hci_res, 0, sizeof(hci_res));
-+
-+ hci_res[0].start = addr;
-+ hci_res[0].end = hci_res[0].start + len - 1;
-+ hci_res[0].flags = IORESOURCE_MEM;
-+
-+ hci_res[1].start = dev->irq;
-+ hci_res[1].flags = IORESOURCE_IRQ;
-+
-+ hci_dev = platform_device_alloc(name, 0);
-+ if (!hci_dev)
-+ goto err_alloc;
-+
-+ hci_dev->dev.parent = dev->dev;
-+ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
-+
-+ ret = platform_device_add_resources(hci_dev, hci_res, 2);
-+ if (ret)
-+ goto err_alloc;
-+
-+ ret = platform_device_add(hci_dev);
-+ if (ret) {
-+err_alloc:
-+ platform_device_put(hci_dev);
-+ return ERR_PTR(ret);
-+ }
-+
-+ return hci_dev;
-+}
-+
-+static int __devinit ssb_hcd_probe(struct ssb_device *dev,
-+ const struct ssb_device_id *id)
-+{
-+ int err, tmp;
-+ int start, len;
-+ u16 chipid_top;
-+ struct ssb_hcd_device *usb_dev;
-+
-+ /* USBcores are only connected on embedded devices. */
-+ chipid_top = (dev->bus->chip_id & 0xFF00);
-+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+ return -ENODEV;
-+
-+ /* TODO: Probably need checks here; is the core connected? */
-+
-+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-+ return -EOPNOTSUPP;
-+
-+ usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
-+ if (!usb_dev)
-+ return -ENOMEM;
-+
-+ /* We currently always attach SSB_DEV_USB11_HOSTDEV
-+ * as HOST OHCI. If we want to attach it as Client device,
-+ * we must branch here and call into the (yet to
-+ * be written) Client mode driver. Same for remove(). */
-+ usb_dev->enable_flags = ssb_hcd_init_chip(dev);
-+
-+ tmp = ssb_read32(dev, SSB_ADMATCH0);
-+
-+ start = ssb_admatch_base(tmp);
-+ len = ssb_admatch_size(tmp);
-+ usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, "ohci-platform", start,
-+ len);
-+ if (IS_ERR(usb_dev->ohci_dev)) {
-+ err = PTR_ERR(usb_dev->ohci_dev);
-+ goto err_free_usb_dev;
-+ }
-+
-+ if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+ start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
-+ len = 0x100; /* ehci reg block size */
-+ usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, "ehci-platform",
-+ start, len);
-+ if (IS_ERR(usb_dev->ehci_dev)) {
-+ err = PTR_ERR(usb_dev->ehci_dev);
-+ goto err_unregister_ohci_dev;
-+ }
-+ }
-+
-+ ssb_set_drvdata(dev, usb_dev);
-+ return 0;
-+
-+err_unregister_ohci_dev:
-+ platform_device_unregister(usb_dev->ohci_dev);
-+err_free_usb_dev:
-+ kfree(usb_dev);
-+ return err;
-+}
-+
-+static void __devexit ssb_hcd_remove(struct ssb_device *dev)
-+{
-+ struct ssb_hcd_device *usb_dev;
-+ struct platform_device *ohci_dev;
-+ struct platform_device *ehci_dev;
-+
-+ usb_dev = ssb_get_drvdata(dev);
-+ if (!usb_dev)
-+ return;
-+
-+ ohci_dev = usb_dev->ohci_dev;
-+ ehci_dev = usb_dev->ehci_dev;
-+
-+ if (ohci_dev) {
-+ platform_device_unregister(ohci_dev);
-+ }
-+ if (ehci_dev) {
-+ platform_device_unregister(ehci_dev);
-+ }
-+
-+ ssb_device_disable(dev, 0);
-+}
-+
-+static void __devexit ssb_hcd_shutdown(struct ssb_device *dev)
-+{
-+ ssb_device_disable(dev, 0);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
-+{
-+ ssb_device_disable(dev, 0);
-+
-+ return 0;
-+}
-+
-+static int ssb_hcd_resume(struct ssb_device *dev)
-+{
-+ struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
-+
-+ ssb_device_enable(dev, usb_dev->enable_flags);
-+
-+ return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ssb_hcd_suspend NULL
-+#define ssb_hcd_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct ssb_device_id ssb_hcd_table[] __devinitconst = {
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-+ SSB_DEVTABLE_END
-+};
-+MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);
-+
-+static struct ssb_driver ssb_hcd_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = ssb_hcd_table,
-+ .probe = ssb_hcd_probe,
-+ .remove = __devexit_p(ssb_hcd_remove),
-+ .shutdown = ssb_hcd_shutdown,
-+ .suspend = ssb_hcd_suspend,
-+ .resume = ssb_hcd_resume,
-+};
-+
-+static int __init ssb_hcd_init(void)
-+{
-+ return ssb_driver_register(&ssb_hcd_driver);
-+}
-+module_init(ssb_hcd_init);
-+
-+static void __exit ssb_hcd_exit(void)
-+{
-+ ssb_driver_unregister(&ssb_hcd_driver);
-+}
-+module_exit(ssb_hcd_exit);
diff --git a/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch b/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch
deleted file mode 100644
index 140088c6d5..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0034-USB-OHCI-remove-old-SSB-OHCI-driver.patch
+++ /dev/null
@@ -1,357 +0,0 @@
-From 8483de69568d1da9c106683d35d2b79c729b56c2 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:36:50 +0100
-Subject: [PATCH 21/21] USB: OHCI: remove old SSB OHCI driver
-
-This is now replaced by the new ssb USB driver, which also supports
-devices with an EHCI controller.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig | 13 --
- drivers/usb/host/ohci-hcd.c | 19 ---
- drivers/usb/host/ohci-ssb.c | 260 -------------------------------------------
- 3 files changed, 0 insertions(+), 292 deletions(-)
- delete mode 100644 drivers/usb/host/ohci-ssb.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -351,19 +351,6 @@ config USB_OHCI_HCD_PCI
- Enables support for PCI-bus plug-in USB controller cards.
- If unsure, say Y.
-
--config USB_OHCI_HCD_SSB
-- bool "OHCI support for Broadcom SSB OHCI core"
-- depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
-- default n
-- ---help---
-- Support for the Sonics Silicon Backplane (SSB) attached
-- Broadcom USB OHCI core.
--
-- This device is present in some embedded devices with
-- Broadcom based SSB bus.
--
-- If unsure, say N.
--
- config USB_OHCI_SH
- bool "OHCI support for SuperH USB controller"
- depends on USB_OHCI_HCD && SUPERH
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1076,11 +1076,6 @@ MODULE_LICENSE ("GPL");
- #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
- #endif
-
--#ifdef CONFIG_USB_OHCI_HCD_SSB
--#include "ohci-ssb.c"
--#define SSB_OHCI_DRIVER ssb_ohci_driver
--#endif
--
- #ifdef CONFIG_MFD_SM501
- #include "ohci-sm501.c"
- #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
-@@ -1125,7 +1120,6 @@ MODULE_LICENSE ("GPL");
- !defined(PS3_SYSTEM_BUS_DRIVER) && \
- !defined(SM501_OHCI_DRIVER) && \
- !defined(TMIO_OHCI_DRIVER) && \
-- !defined(SSB_OHCI_DRIVER) && \
- !defined(PLATFORM_OHCI_DRIVER)
- #error "missing bus glue for ohci-hcd"
- #endif
-@@ -1192,12 +1186,6 @@ static int __init ohci_hcd_mod_init(void
- goto error_pci;
- #endif
-
--#ifdef SSB_OHCI_DRIVER
-- retval = ssb_driver_register(&SSB_OHCI_DRIVER);
-- if (retval)
-- goto error_ssb;
--#endif
--
- #ifdef SM501_OHCI_DRIVER
- retval = platform_driver_register(&SM501_OHCI_DRIVER);
- if (retval < 0)
-@@ -1231,10 +1219,6 @@ static int __init ohci_hcd_mod_init(void
- platform_driver_unregister(&SM501_OHCI_DRIVER);
- error_sm501:
- #endif
--#ifdef SSB_OHCI_DRIVER
-- ssb_driver_unregister(&SSB_OHCI_DRIVER);
-- error_ssb:
--#endif
- #ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
- error_pci:
-@@ -1285,9 +1269,6 @@ static void __exit ohci_hcd_mod_exit(voi
- #ifdef SM501_OHCI_DRIVER
- platform_driver_unregister(&SM501_OHCI_DRIVER);
- #endif
--#ifdef SSB_OHCI_DRIVER
-- ssb_driver_unregister(&SSB_OHCI_DRIVER);
--#endif
- #ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
- #endif
---- a/drivers/usb/host/ohci-ssb.c
-+++ /dev/null
-@@ -1,260 +0,0 @@
--/*
-- * Sonics Silicon Backplane
-- * Broadcom USB-core OHCI driver
-- *
-- * Copyright 2007 Michael Buesch <mb@bu3sch.de>
-- *
-- * Derived from the OHCI-PCI driver
-- * Copyright 1999 Roman Weissgaerber
-- * Copyright 2000-2002 David Brownell
-- * Copyright 1999 Linus Torvalds
-- * Copyright 1999 Gregory P. Smith
-- *
-- * Derived from the USBcore related parts of Broadcom-SB
-- * Copyright 2005 Broadcom Corporation
-- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-- */
--#include <linux/ssb/ssb.h>
--
--
--#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
--
--struct ssb_ohci_device {
-- struct ohci_hcd ohci; /* _must_ be at the beginning. */
--
-- u32 enable_flags;
--};
--
--static inline
--struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
--{
-- return (struct ssb_ohci_device *)(hcd->hcd_priv);
--}
--
--
--static int ssb_ohci_reset(struct usb_hcd *hcd)
--{
-- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-- struct ohci_hcd *ohci = &ohcidev->ohci;
-- int err;
--
-- ohci_hcd_init(ohci);
-- err = ohci_init(ohci);
--
-- return err;
--}
--
--static int ssb_ohci_start(struct usb_hcd *hcd)
--{
-- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-- struct ohci_hcd *ohci = &ohcidev->ohci;
-- int err;
--
-- err = ohci_run(ohci);
-- if (err < 0) {
-- ohci_err(ohci, "can't start\n");
-- ohci_stop(hcd);
-- }
--
-- return err;
--}
--
--static const struct hc_driver ssb_ohci_hc_driver = {
-- .description = "ssb-usb-ohci",
-- .product_desc = "SSB OHCI Controller",
-- .hcd_priv_size = sizeof(struct ssb_ohci_device),
--
-- .irq = ohci_irq,
-- .flags = HCD_MEMORY | HCD_USB11,
--
-- .reset = ssb_ohci_reset,
-- .start = ssb_ohci_start,
-- .stop = ohci_stop,
-- .shutdown = ohci_shutdown,
--
-- .urb_enqueue = ohci_urb_enqueue,
-- .urb_dequeue = ohci_urb_dequeue,
-- .endpoint_disable = ohci_endpoint_disable,
--
-- .get_frame_number = ohci_get_frame,
--
-- .hub_status_data = ohci_hub_status_data,
-- .hub_control = ohci_hub_control,
--#ifdef CONFIG_PM
-- .bus_suspend = ohci_bus_suspend,
-- .bus_resume = ohci_bus_resume,
--#endif
--
-- .start_port_reset = ohci_start_port_reset,
--};
--
--static void ssb_ohci_detach(struct ssb_device *dev)
--{
-- struct usb_hcd *hcd = ssb_get_drvdata(dev);
--
-- if (hcd->driver->shutdown)
-- hcd->driver->shutdown(hcd);
-- usb_remove_hcd(hcd);
-- iounmap(hcd->regs);
-- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-- usb_put_hcd(hcd);
-- ssb_device_disable(dev, 0);
--}
--
--static int ssb_ohci_attach(struct ssb_device *dev)
--{
-- struct ssb_ohci_device *ohcidev;
-- struct usb_hcd *hcd;
-- int err = -ENOMEM;
-- u32 tmp, flags = 0;
--
-- if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-- dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-- return -EOPNOTSUPP;
--
-- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
-- /* Put the device into host-mode. */
-- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-- ssb_device_enable(dev, flags);
-- } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-- /*
-- * USB 2.0 special considerations:
-- *
-- * In addition to the standard SSB reset sequence, the Host
-- * Control Register must be programmed to bring the USB core
-- * and various phy components out of reset.
-- */
-- ssb_device_enable(dev, 0);
-- ssb_write32(dev, 0x200, 0x7ff);
--
-- /* Change Flush control reg */
-- tmp = ssb_read32(dev, 0x400);
-- tmp &= ~8;
-- ssb_write32(dev, 0x400, tmp);
-- tmp = ssb_read32(dev, 0x400);
--
-- /* Change Shim control reg */
-- tmp = ssb_read32(dev, 0x304);
-- tmp &= ~0x100;
-- ssb_write32(dev, 0x304, tmp);
-- tmp = ssb_read32(dev, 0x304);
--
-- udelay(1);
--
-- /* Work around for 5354 failures */
-- if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-- /* Change syn01 reg */
-- tmp = 0x00fe00fe;
-- ssb_write32(dev, 0x894, tmp);
--
-- /* Change syn03 reg */
-- tmp = ssb_read32(dev, 0x89c);
-- tmp |= 0x1;
-- ssb_write32(dev, 0x89c, tmp);
-- }
-- } else
-- ssb_device_enable(dev, 0);
--
-- hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
-- dev_name(dev->dev));
-- if (!hcd)
-- goto err_dev_disable;
-- ohcidev = hcd_to_ssb_ohci(hcd);
-- ohcidev->enable_flags = flags;
--
-- tmp = ssb_read32(dev, SSB_ADMATCH0);
-- hcd->rsrc_start = ssb_admatch_base(tmp);
-- hcd->rsrc_len = ssb_admatch_size(tmp);
-- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-- if (!hcd->regs)
-- goto err_put_hcd;
-- err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
-- if (err)
-- goto err_iounmap;
--
-- ssb_set_drvdata(dev, hcd);
--
-- return err;
--
--err_iounmap:
-- iounmap(hcd->regs);
--err_put_hcd:
-- usb_put_hcd(hcd);
--err_dev_disable:
-- ssb_device_disable(dev, flags);
-- return err;
--}
--
--static int ssb_ohci_probe(struct ssb_device *dev,
-- const struct ssb_device_id *id)
--{
-- int err;
-- u16 chipid_top;
--
-- /* USBcores are only connected on embedded devices. */
-- chipid_top = (dev->bus->chip_id & 0xFF00);
-- if (chipid_top != 0x4700 && chipid_top != 0x5300)
-- return -ENODEV;
--
-- /* TODO: Probably need checks here; is the core connected? */
--
-- if (usb_disabled())
-- return -ENODEV;
--
-- /* We currently always attach SSB_DEV_USB11_HOSTDEV
-- * as HOST OHCI. If we want to attach it as Client device,
-- * we must branch here and call into the (yet to
-- * be written) Client mode driver. Same for remove(). */
--
-- err = ssb_ohci_attach(dev);
--
-- return err;
--}
--
--static void ssb_ohci_remove(struct ssb_device *dev)
--{
-- ssb_ohci_detach(dev);
--}
--
--#ifdef CONFIG_PM
--
--static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
--{
-- ssb_device_disable(dev, 0);
--
-- return 0;
--}
--
--static int ssb_ohci_resume(struct ssb_device *dev)
--{
-- struct usb_hcd *hcd = ssb_get_drvdata(dev);
-- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
--
-- ssb_device_enable(dev, ohcidev->enable_flags);
--
-- ohci_finish_controller_resume(hcd);
-- return 0;
--}
--
--#else /* !CONFIG_PM */
--#define ssb_ohci_suspend NULL
--#define ssb_ohci_resume NULL
--#endif /* CONFIG_PM */
--
--static const struct ssb_device_id ssb_ohci_table[] = {
-- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
-- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-- SSB_DEVTABLE_END
--};
--MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
--
--static struct ssb_driver ssb_ohci_driver = {
-- .name = KBUILD_MODNAME,
-- .id_table = ssb_ohci_table,
-- .probe = ssb_ohci_probe,
-- .remove = ssb_ohci_remove,
-- .suspend = ssb_ohci_suspend,
-- .resume = ssb_ohci_resume,
--};
diff --git a/target/linux/brcm47xx/patches-3.0/0045-ssb-fix-cardbus-in-hostmode.patch b/target/linux/brcm47xx/patches-3.0/0045-ssb-fix-cardbus-in-hostmode.patch
deleted file mode 100644
index 0a329c00a3..0000000000
--- a/target/linux/brcm47xx/patches-3.0/0045-ssb-fix-cardbus-in-hostmode.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 7b90e7040b9783b91a4e2baf72ac32d3a00f9f2d Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 21 Jan 2012 11:18:25 +0100
-Subject: [PATCH 31/34] ssb: fix cardbus in hostmode
-
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/ssb/driver_pcicore.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -74,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_
- u32 tmp;
-
- /* We do only have one cardbus device behind the bridge. */
-- if (pc->cardbusmode && (dev >= 1))
-+ if (pc->cardbusmode && (dev > 1))
- goto out;
-
- if (bus == 0) {
diff --git a/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
deleted file mode 100644
index 0951644412..0000000000
--- a/target/linux/brcm47xx/patches-3.0/014-MIPS-BCM47xx-Setup-and-register-serial-early.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Jul 2010 14:59:24 +0200
-Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early
-
-Swap the first and second serial if console=ttyS1 was set.
-Set it up and register it for early serial support.
-
-This patch has been in OpenWRT for a long time.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/bcm47xx/setup.c | 39 ++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 38 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -31,6 +31,8 @@
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
- #include <linux/platform_device.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -278,6 +280,31 @@ static int bcm47xx_get_invariants(struct
- return 0;
- }
-
-+#ifdef CONFIG_SERIAL_8250
-+static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore)
-+{
-+ int i;
-+
-+ for (i = 0; i < mcore->nr_serial_ports; i++) {
-+ struct ssb_serial_port *port = &(mcore->serial_ports[i]);
-+ struct uart_port s;
-+
-+ memset(&s, 0, sizeof(s));
-+ s.line = i;
-+ s.mapbase = (unsigned int) port->regs;
-+ s.membase = port->regs;
-+ s.irq = port->irq + 2;
-+ s.uartclk = port->baud_base;
-+ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-+ s.iotype = SERIAL_IO_MEM;
-+ s.regshift = port->reg_shift;
-+
-+ early_serial_setup(&s);
-+ }
-+ printk(KERN_DEBUG "Serial init done.\n");
-+}
-+#endif
-+
- static void __init bcm47xx_register_ssb(void)
- {
- int err;
-@@ -310,6 +337,10 @@ static void __init bcm47xx_register_ssb(
- memcpy(&mcore->serial_ports[1], &port, sizeof(port));
- }
- }
-+
-+#ifdef CONFIG_SERIAL_8250
-+ bcm47xx_early_serial_setup(mcore);
-+#endif
- }
- #endif
-
diff --git a/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch b/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch
deleted file mode 100644
index 69d4eefa85..0000000000
--- a/target/linux/brcm47xx/patches-3.0/016-MIPS-BCM47xx-Remove-CFE-console.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Jul 2010 15:11:26 +0200
-Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console
-
-Do not use the CFE console. It causes hangs on some devices like the
-Buffalo WHR-HP-G54.
-This was reported in https://dev.openwrt.org/ticket/4061 and
-https://forum.openwrt.org/viewtopic.php?id=17063
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/Kconfig | 1 -
- arch/mips/bcm47xx/prom.c | 82 +++------------------------------------------
- 2 files changed, 6 insertions(+), 77 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -94,7 +94,6 @@ config BCM47XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_GPIO
-- select SYS_HAS_EARLY_PRINTK
- select CFE
- help
- Support for BCM47XX based boards
---- a/arch/mips/bcm47xx/prom.c
-+++ b/arch/mips/bcm47xx/prom.c
-@@ -31,96 +31,28 @@
- #include <asm/fw/cfe/cfe_api.h>
- #include <asm/fw/cfe/cfe_error.h>
-
--static int cfe_cons_handle;
--
- const char *get_system_type(void)
- {
- return "Broadcom BCM47XX";
- }
-
--void prom_putchar(char c)
--{
-- while (cfe_write(cfe_cons_handle, &c, 1) == 0)
-- ;
--}
--
--static __init void prom_init_cfe(void)
-+static __init int prom_init_cfe(void)
- {
- uint32_t cfe_ept;
- uint32_t cfe_handle;
- uint32_t cfe_eptseal;
-- int argc = fw_arg0;
-- char **envp = (char **) fw_arg2;
-- int *prom_vec = (int *) fw_arg3;
--
-- /*
-- * Check if a loader was used; if NOT, the 4 arguments are
-- * what CFE gives us (handle, 0, EPT and EPTSEAL)
-- */
-- if (argc < 0) {
-- cfe_handle = (uint32_t)argc;
-- cfe_ept = (uint32_t)envp;
-- cfe_eptseal = (uint32_t)prom_vec;
-- } else {
-- if ((int)prom_vec < 0) {
-- /*
-- * Old loader; all it gives us is the handle,
-- * so use the "known" entrypoint and assume
-- * the seal.
-- */
-- cfe_handle = (uint32_t)prom_vec;
-- cfe_ept = 0xBFC00500;
-- cfe_eptseal = CFE_EPTSEAL;
-- } else {
-- /*
-- * Newer loaders bundle the handle/ept/eptseal
-- * Note: prom_vec is in the loader's useg
-- * which is still alive in the TLB.
-- */
-- cfe_handle = prom_vec[0];
-- cfe_ept = prom_vec[2];
-- cfe_eptseal = prom_vec[3];
-- }
-- }
-+
-+ cfe_eptseal = (uint32_t) fw_arg3;
-+ cfe_handle = (uint32_t) fw_arg0;
-+ cfe_ept = (uint32_t) fw_arg2;
-
- if (cfe_eptseal != CFE_EPTSEAL) {
-- /* too early for panic to do any good */
- printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
-- while (1) ;
-+ return -1;
- }
-
- cfe_init(cfe_handle, cfe_ept);
--}
--
--static __init void prom_init_console(void)
--{
-- /* Initialize CFE console */
-- cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
--}
--
--static __init void prom_init_cmdline(void)
--{
-- static char buf[COMMAND_LINE_SIZE] __initdata;
--
-- /* Get the kernel command line from CFE */
-- if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
-- buf[COMMAND_LINE_SIZE - 1] = 0;
-- strcpy(arcs_cmdline, buf);
-- }
--
-- /* Force a console handover by adding a console= argument if needed,
-- * as CFE is not available anymore later in the boot process. */
-- if ((strstr(arcs_cmdline, "console=")) == NULL) {
-- /* Try to read the default serial port used by CFE */
-- if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
-- || (strncmp("uart", buf, 4)))
-- /* Default to uart0 */
-- strcpy(buf, "uart0");
--
-- /* Compute the new command line */
-- snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
-- arcs_cmdline, buf[4]);
-- }
-+ return 0;
- }
-
- static __init void prom_init_mem(void)
-@@ -161,8 +93,6 @@ static __init void prom_init_mem(void)
- void __init prom_init(void)
- {
- prom_init_cfe();
-- prom_init_console();
-- prom_init_cmdline();
- prom_init_mem();
- }
-
diff --git a/target/linux/brcm47xx/patches-3.0/019-fix-boot.patch b/target/linux/brcm47xx/patches-3.0/019-fix-boot.patch
deleted file mode 100644
index f6d131d845..0000000000
--- a/target/linux/brcm47xx/patches-3.0/019-fix-boot.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -121,14 +121,6 @@
- #endif
- .endm
-
--#ifndef CONFIG_NO_EXCEPT_FILL
-- /*
-- * Reserved space for exception handlers.
-- * Necessary for machines which link their kernels at KSEG0.
-- */
-- .fill 0x400
--#endif
--
- EXPORT(_stext)
-
- #ifdef CONFIG_BOOT_RAW
-@@ -141,6 +133,14 @@ FEXPORT(__kernel_entry)
- j kernel_entry
- #endif
-
-+#ifndef CONFIG_NO_EXCEPT_FILL
-+ /*
-+ * Reserved space for exception handlers.
-+ * Necessary for machines which link their kernels at KSEG0.
-+ */
-+ .fill 0x400
-+#endif
-+
- #ifdef CONFIG_IMAGE_CMDLINE_HACK
- .ascii "CMDLINE:"
- EXPORT(__image_cmdline)
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -86,6 +86,7 @@ config ATH79
-
- config BCM47XX
- bool "Broadcom BCM47XX based boards"
-+ select BOOT_RAW
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
diff --git a/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch b/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch
deleted file mode 100644
index 2bc7718c34..0000000000
--- a/target/linux/brcm47xx/patches-3.0/040-bcm47xx-add-gpio_set_debounce.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
-@@ -136,6 +136,10 @@ static inline int gpio_polarity(unsigned
- return -EINVAL;
- }
-
-+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-+{
-+ return -ENOSYS;
-+}
-
- /* cansleep wrappers */
- #include <asm-generic/gpio.h>
diff --git a/target/linux/brcm47xx/patches-3.0/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.0/150-cpu_fixes.patch
deleted file mode 100644
index 479e66f681..0000000000
--- a/target/linux/brcm47xx/patches-3.0/150-cpu_fixes.patch
+++ /dev/null
@@ -1,367 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -17,6 +17,20 @@
- #include <asm/cpu-features.h>
- #include <asm/mipsmtregs.h>
-
-+#ifdef CONFIG_BCM47XX
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
-+
-+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
- * This macro return a properly sign-extended address suitable as base address
- * for indexed cache operations. Two issues here:
-@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Index_Writeback_Inv_D, addr);
- __dflush_epilogue
- }
-@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
- static inline void flush_dcache_line(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Writeback_Inv_D, addr);
- __dflush_epilogue
- }
-@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
- static inline void invalidate_dcache_line(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Invalidate_D, addr);
- __dflush_epilogue
- }
-@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
- */
- static inline void protected_flush_icache_line(unsigned long addr)
- {
-+ BCM4710_DUMMY_RREG();
- protected_cache_op(Hit_Invalidate_I, addr);
- }
-
-@@ -219,6 +237,7 @@ static inline void protected_flush_icach
- */
- static inline void protected_writeback_dcache_line(unsigned long addr)
- {
-+ BCM4710_DUMMY_RREG();
- protected_cache_op(Hit_Writeback_Inv_D, addr);
- }
-
-@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
- : "r" (base), \
- "i" (op));
-
-+static inline void blast_dcache(void)
-+{
-+ unsigned long start = KSEG0;
-+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+ unsigned long end = (start + dcache_size);
-+
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, start);
-+ start += current_cpu_data.dcache.linesz;
-+ } while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+
-+ BCM4710_FILL_TLB(start);
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Hit_Writeback_Inv_D, start);
-+ start += current_cpu_data.dcache.linesz;
-+ } while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+ unsigned long ws_end = current_cpu_data.dcache.ways <<
-+ current_cpu_data.dcache.waybit;
-+ unsigned long ws, addr;
-+ for (ws = 0; ws < ws_end; ws += ws_inc) {
-+ start = page + ws;
-+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, addr);
-+ }
-+ }
-+}
-+
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
- static inline void blast_##pfx##cache##lsize(void) \
- { \
- unsigned long start = INDEX_BASE; \
-@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
- \
- __##pfx##flush_prologue \
- \
-+ war \
- for (ws = 0; ws < ws_end; ws += ws_inc) \
- for (addr = start; addr < end; addr += lsize * 32) \
- cache##lsize##_unroll32(addr|ws, indexop); \
-@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
- \
- __##pfx##flush_prologue \
- \
-+ war \
- do { \
- cache##lsize##_unroll32(start, hitop); \
- start += lsize * 32; \
-@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
- current_cpu_data.desc.waybit; \
- unsigned long ws, addr; \
- \
-+ war \
-+ \
- __##pfx##flush_prologue \
- \
- for (ws = 0; ws < ws_end; ws += ws_inc) \
-@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
- __##pfx##flush_epilogue \
- }
-
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
--
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
-
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
- static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
- unsigned long end) \
- { \
- unsigned long lsize = cpu_##desc##_line_size(); \
- unsigned long addr = start & ~(lsize - 1); \
- unsigned long aend = (end - 1) & ~(lsize - 1); \
-+ war \
- \
- __##pfx##flush_prologue \
- \
- while (1) { \
-+ war2 \
- prot##cache_op(hitop, addr); \
- if (addr == aend) \
- break; \
-@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
- __##pfx##flush_epilogue \
- }
-
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
--__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
-
- #endif /* _ASM_R4KCACHE_H */
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -449,6 +449,10 @@
- .macro RESTORE_SP_AND_RET
- LONG_L sp, PT_R29(sp)
- .set mips3
-+#ifdef CONFIG_BCM47XX
-+ nop
-+ nop
-+#endif
- eret
- .set mips0
- .endm
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -52,6 +52,10 @@ NESTED(except_vec1_generic, 0, sp)
- NESTED(except_vec3_generic, 0, sp)
- .set push
- .set noat
-+#ifdef CONFIG_BCM47XX
-+ nop
-+ nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- mfc0 k0, CP0_INDEX
- #endif
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -35,6 +35,9 @@
- #include <asm/cacheflush.h> /* for run_uncached() */
-
-
-+/* For enabling BCM4710 cache workarounds */
-+int bcm4710 = 0;
-+
- /*
- * Special Variant of smp_call_function for use by cache functions:
- *
-@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache_page = blast_dcache_page;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache_page = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache_page_indexed = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -143,6 +152,9 @@ static void __cpuinit r4k_blast_dcache_s
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache = blast_dcache;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -679,6 +691,8 @@ static void local_r4k_flush_cache_sigtra
- unsigned long addr = (unsigned long) arg;
-
- R4600_HIT_CACHEOP_WAR_IMPL;
-+ BCM4710_PROTECTED_FILL_TLB(addr);
-+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
- if (dc_lsize)
- protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1309,6 +1323,17 @@ static void __cpuinit coherency_setup(vo
- * silly idea of putting something else there ...
- */
- switch (current_cpu_type()) {
-+ case CPU_BMIPS3300:
-+ {
-+ u32 cm;
-+ cm = read_c0_diag();
-+ /* Enable icache */
-+ cm |= (1 << 31);
-+ /* Enable dcache */
-+ cm |= (1 << 30);
-+ write_c0_diag(cm);
-+ }
-+ break;
- case CPU_R4000PC:
- case CPU_R4000SC:
- case CPU_R4000MC:
-@@ -1365,6 +1390,15 @@ void __cpuinit r4k_cache_init(void)
- break;
- }
-
-+ /* Check if special workarounds are required */
-+#ifdef CONFIG_BCM47XX
-+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
-+ printk("Enabling BCM4710A0 cache workarounds.\n");
-+ bcm4710 = 1;
-+ } else
-+#endif
-+ bcm4710 = 0;
-+
- probe_pcache();
- setup_scache();
-
-@@ -1423,5 +1457,13 @@ void __cpuinit r4k_cache_init(void)
- #if !defined(CONFIG_MIPS_CMP)
- local_r4k___flush_cache_all(NULL);
- #endif
-+#ifdef CONFIG_BCM47XX
-+ {
-+ static void (*_coherency_setup)(void);
-+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+ _coherency_setup();
-+ }
-+#else
- coherency_setup();
-+#endif
- }
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -1188,6 +1188,9 @@ static void __cpuinit build_r4000_tlb_re
- /* No need for uasm_i_nop */
- }
-
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+#endif
- #ifdef CONFIG_64BIT
- build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-@@ -1707,6 +1710,9 @@ build_r4000_tlbchange_handler_head(u32 *
- struct uasm_reloc **r, unsigned int pte,
- unsigned int ptr)
- {
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- #ifdef CONFIG_64BIT
- build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
- #else
diff --git a/target/linux/brcm47xx/patches-3.0/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-3.0/160-kmap_coherent.patch
deleted file mode 100644
index 9253e915ed..0000000000
--- a/target/linux/brcm47xx/patches-3.0/160-kmap_coherent.patch
+++ /dev/null
@@ -1,77 +0,0 @@
---- a/arch/mips/include/asm/cpu-features.h
-+++ b/arch/mips/include/asm/cpu-features.h
-@@ -110,6 +110,9 @@
- #ifndef cpu_has_pindexed_dcache
- #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
-
- /*
- * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -0,0 +1,13 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
-+ */
-+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
-+
-+#define cpu_use_kmap_coherent 0
-+
-+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -507,7 +507,7 @@ static inline void local_r4k_flush_cache
- */
- map_coherent = (cpu_has_dc_aliases &&
- page_mapped(page) && !Page_dcache_dirty(page));
-- if (map_coherent)
-+ if (map_coherent && cpu_use_kmap_coherent)
- vaddr = kmap_coherent(page, addr);
- else
- vaddr = kmap_atomic(page, KM_USER0);
-@@ -530,7 +530,7 @@ static inline void local_r4k_flush_cache
- }
-
- if (vaddr) {
-- if (map_coherent)
-+ if (map_coherent && cpu_use_kmap_coherent)
- kunmap_coherent();
- else
- kunmap_atomic(vaddr, KM_USER0);
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -208,7 +208,7 @@ void copy_user_highpage(struct page *to,
- void *vfrom, *vto;
-
- vto = kmap_atomic(to, KM_USER1);
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
-@@ -230,7 +230,7 @@ void copy_to_user_page(struct vm_area_st
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
- {
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(page) && !Page_dcache_dirty(page)) {
- void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(vto, src, len);
-@@ -248,7 +248,7 @@ void copy_from_user_page(struct vm_area_
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
- {
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(page) && !Page_dcache_dirty(page)) {
- void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(dst, vfrom, len);
diff --git a/target/linux/brcm47xx/patches-3.0/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-3.0/210-b44_phy_fix.patch
deleted file mode 100644
index 49f7999149..0000000000
--- a/target/linux/brcm47xx/patches-3.0/210-b44_phy_fix.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -411,10 +411,41 @@ static void b44_wap54g10_workaround(stru
- error:
- pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
- }
-+
-+static inline int startswith (const char *source, const char *cmp)
-+{
-+ return !strncmp(source,cmp,strlen(cmp));
-+}
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+ char buf[20];
-+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+ if (nvram_getenv("boardnum", buf, sizeof(buf)) > 0)
-+ return;
-+ if (simple_strtoul(buf, NULL, 0) == 100) {
-+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+ } else {
-+ /* WL-HDD */
-+ struct ssb_device *sdev = bp->sdev;
-+ if (nvram_getenv("hardware_version", buf, sizeof(buf)) > 0)
-+ return;
-+ if (startswith(buf, "WL300-")) {
-+ if (sdev->bus->sprom.et0phyaddr == 0 &&
-+ sdev->bus->sprom.et1phyaddr == 1)
-+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+ }
-+ }
-+ return;
-+}
- #else
- static inline void b44_wap54g10_workaround(struct b44 *bp)
- {
- }
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+}
- #endif
-
- static int b44_setup_phy(struct b44 *bp)
-@@ -423,6 +454,7 @@ static int b44_setup_phy(struct b44 *bp)
- int err;
-
- b44_wap54g10_workaround(bp);
-+ b44_bcm47xx_workarounds(bp);
-
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
- return 0;
-@@ -2089,6 +2121,8 @@ static int __devinit b44_get_invariants(
- * valid PHY address. */
- bp->phy_addr &= 0x1F;
-
-+ b44_bcm47xx_workarounds(bp);
-+
- memcpy(bp->dev->dev_addr, addr, 6);
-
- if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/brcm47xx/patches-3.0/211-b44_timeout_spam.patch b/target/linux/brcm47xx/patches-3.0/211-b44_timeout_spam.patch
deleted file mode 100644
index f333d71d80..0000000000
--- a/target/linux/brcm47xx/patches-3.0/211-b44_timeout_spam.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -188,10 +188,11 @@ static int b44_wait_bit(struct b44 *bp,
- udelay(10);
- }
- if (i == timeout) {
-+#if 0
- if (net_ratelimit())
- netdev_err(bp->dev, "BUG! Timeout waiting for bit %08x of register %lx to %s\n",
- bit, reg, clear ? "clear" : "set");
--
-+#endif
- return -ENODEV;
- }
- return 0;
diff --git a/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch b/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch
deleted file mode 100644
index 61f0a7ecad..0000000000
--- a/target/linux/brcm47xx/patches-3.0/220-bcm5354.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -317,6 +317,8 @@ void ssb_chipco_resume(struct ssb_chipco
- void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
- u32 *plltype, u32 *n, u32 *m)
- {
-+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
-+ return;
- *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
- *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- switch (*plltype) {
-@@ -340,6 +342,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
- void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
- u32 *plltype, u32 *n, u32 *m)
- {
-+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354)
-+ return;
- *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
- *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
- switch (*plltype) {
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -241,6 +241,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
-
- if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
- rate = 200000000;
-+ } else if (bus->chip_id == 0x5354) {
-+ rate = 240000000;
- } else {
- rate = ssb_calc_clock_rate(pll_type, n, m);
- }
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1105,6 +1105,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
-
- if (bus->chip_id == 0x5365) {
- rate = 100000000;
-+ } else if (bus->chip_id == 0x5354) {
-+ rate = 120000000;
- } else {
- rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
- if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
diff --git a/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch
deleted file mode 100644
index c535c05db5..0000000000
--- a/target/linux/brcm47xx/patches-3.0/280-activate_ssb_support_in_usb.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
- config BCMA_HOST_SOC
- bool
- depends on BCMA_DRIVER_MIPS
-+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
-
- config BCMA_SFLASH
- bool
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -147,6 +147,7 @@ config SSB_SFLASH
- config SSB_EMBEDDED
- bool
- depends on SSB_DRIVER_MIPS
-+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
- default y
-
- config SSB_DRIVER_EXTIF
diff --git a/target/linux/brcm47xx/patches-3.0/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-3.0/300-fork_cacheflush.patch
deleted file mode 100644
index 686fb1b945..0000000000
--- a/target/linux/brcm47xx/patches-3.0/300-fork_cacheflush.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/include/asm/cacheflush.h
-+++ b/arch/mips/include/asm/cacheflush.h
-@@ -32,7 +32,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
--#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/brcm47xx/patches-3.0/301-kmod-fuse-dcache-bug-r4k.patch b/target/linux/brcm47xx/patches-3.0/301-kmod-fuse-dcache-bug-r4k.patch
deleted file mode 100644
index abfb947e55..0000000000
--- a/target/linux/brcm47xx/patches-3.0/301-kmod-fuse-dcache-bug-r4k.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -373,7 +373,7 @@ static inline void local_r4k___flush_cac
- }
- }
-
--static void r4k___flush_cache_all(void)
-+void r4k___flush_cache_all(void)
- {
- r4k_on_each_cpu(local_r4k___flush_cache_all, NULL);
- }
-@@ -537,7 +537,7 @@ static inline void local_r4k_flush_cache
- }
- }
-
--static void r4k_flush_cache_page(struct vm_area_struct *vma,
-+void r4k_flush_cache_page(struct vm_area_struct *vma,
- unsigned long addr, unsigned long pfn)
- {
- struct flush_cache_page_args args;
-@@ -1467,3 +1467,7 @@ void __cpuinit r4k_cache_init(void)
- coherency_setup();
- #endif
- }
-+
-+/* fuse package DCACHE BUG patch exports */
-+void (*fuse_flush_cache_all)(void) = r4k___flush_cache_all;
-+EXPORT_SYMBOL(fuse_flush_cache_all);
diff --git a/target/linux/brcm47xx/patches-3.0/302-kmod-fuse-dcache-bug-fuse.patch b/target/linux/brcm47xx/patches-3.0/302-kmod-fuse-dcache-bug-fuse.patch
deleted file mode 100644
index 12e7251061..0000000000
--- a/target/linux/brcm47xx/patches-3.0/302-kmod-fuse-dcache-bug-fuse.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/fs/fuse/dev.c
-+++ b/fs/fuse/dev.c
-@@ -651,11 +651,20 @@ static int fuse_copy_fill(struct fuse_co
- return lock_request(cs->fc, cs->req);
- }
-
-+#ifdef DCACHE_BUG
-+extern void (*fuse_flush_cache_all)(void);
-+#endif
-+
- /* Do as much copy to/from userspace buffer as we can */
- static int fuse_copy_do(struct fuse_copy_state *cs, void **val, unsigned *size)
- {
- unsigned ncpy = min(*size, cs->len);
- if (val) {
-+#ifdef DCACHE_BUG
-+ // patch from mailing list, it is very important, otherwise,
-+ // can't mount, or ls mount point will hang
-+ fuse_flush_cache_all();
-+#endif
- if (cs->write)
- memcpy(cs->buf, *val, ncpy);
- else
---- a/fs/fuse/fuse_i.h
-+++ b/fs/fuse/fuse_i.h
-@@ -8,6 +8,7 @@
-
- #ifndef _FS_FUSE_I_H
- #define _FS_FUSE_I_H
-+#define DCACHE_BUG
-
- #include <linux/fuse.h>
- #include <linux/fs.h>
---- a/fs/fuse/inode.c
-+++ b/fs/fuse/inode.c
-@@ -1202,6 +1202,10 @@ static int __init fuse_init(void)
- printk(KERN_INFO "fuse init (API version %i.%i)\n",
- FUSE_KERNEL_VERSION, FUSE_KERNEL_MINOR_VERSION);
-
-+#ifdef DCACHE_BUG
-+ printk("fuse init DCACHE_BUG workaround enabled\n");
-+#endif
-+
- INIT_LIST_HEAD(&fuse_conn_list);
- res = fuse_fs_init();
- if (res)
diff --git a/target/linux/brcm47xx/patches-3.0/310-no_highpage.patch b/target/linux/brcm47xx/patches-3.0/310-no_highpage.patch
deleted file mode 100644
index 2bc05c4562..0000000000
--- a/target/linux/brcm47xx/patches-3.0/310-no_highpage.patch
+++ /dev/null
@@ -1,66 +0,0 @@
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -43,6 +43,7 @@
- #ifndef __ASSEMBLY__
-
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
- #include <asm/io.h>
-
- extern void build_clear_page(void);
-@@ -78,13 +79,16 @@ static inline void clear_user_page(void
- flush_data_cache_page((unsigned long)addr);
- }
-
--extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-- struct page *to);
--struct vm_area_struct;
--extern void copy_user_highpage(struct page *to, struct page *from,
-- unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+ struct page *to)
-+{
-+ extern void (*flush_data_cache_page)(unsigned long addr);
-
--#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+ copy_page(vto, vfrom);
-+ if (!cpu_has_ic_fills_f_dc ||
-+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+ flush_data_cache_page((unsigned long)vto);
-+}
-
- /*
- * These are used to make use of C type-checking..
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -202,30 +202,6 @@ void kunmap_coherent(void)
- preempt_check_resched();
- }
-
--void copy_user_highpage(struct page *to, struct page *from,
-- unsigned long vaddr, struct vm_area_struct *vma)
--{
-- void *vfrom, *vto;
--
-- vto = kmap_atomic(to, KM_USER1);
-- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
-- page_mapped(from) && !Page_dcache_dirty(from)) {
-- vfrom = kmap_coherent(from, vaddr);
-- copy_page(vto, vfrom);
-- kunmap_coherent();
-- } else {
-- vfrom = kmap_atomic(from, KM_USER0);
-- copy_page(vto, vfrom);
-- kunmap_atomic(vfrom, KM_USER0);
-- }
-- if ((!cpu_has_ic_fills_f_dc) ||
-- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-- flush_data_cache_page((unsigned long)vto);
-- kunmap_atomic(vto, KM_USER1);
-- /* Make sure this page is cleared on other CPU's too before using it */
-- smp_wmb();
--}
--
- void copy_to_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
diff --git a/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch
deleted file mode 100644
index 46d47e3d01..0000000000
--- a/target/linux/brcm47xx/patches-3.0/400-arch-bcm47xx.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -199,3 +199,30 @@ int nvram_getenv(char *name, char *val,
- return NVRAM_ERR_ENVNOTFOUND;
- }
- EXPORT_SYMBOL(nvram_getenv);
-+
-+char *nvram_get(const char *name)
-+{
-+ char *var, *value, *end, *eq;
-+
-+ if (!name)
-+ return NULL;
-+
-+ if (!nvram_buf[0])
-+ early_nvram_init();
-+
-+ /* Look for name=value and return value */
-+ var = &nvram_buf[sizeof(struct nvram_header)];
-+ end = nvram_buf + sizeof(nvram_buf) - 2;
-+ end[0] = end[1] = '\0';
-+ for (; *var; var = value + strlen(value) + 1) {
-+ eq = strchr(var, '=');
-+ if (!eq)
-+ break;
-+ value = eq + 1;
-+ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
-+ return value;
-+ }
-+
-+ return NULL;
-+}
-+EXPORT_SYMBOL(nvram_get);
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -468,3 +468,20 @@ static int __init bcm47xx_register_flash
- return -1;
- }
- fs_initcall(bcm47xx_register_flash);
-+
-+static int __init bcm47xx_register_gpiodev(void)
-+{
-+ static struct resource res = {
-+ .start = 0xFFFFFFFF,
-+ };
-+ struct platform_device *pdev;
-+
-+ pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
-+ if (!pdev) {
-+ printk(KERN_ERR "bcm47xx: GPIODEV init failed\n");
-+ return -ENODEV;
-+ }
-+
-+ return 0;
-+}
-+device_initcall(bcm47xx_register_gpiodev);
diff --git a/target/linux/brcm47xx/patches-3.0/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-3.0/601-mips-remove-pci-collision-check.patch
deleted file mode 100644
index 7860ca0dd8..0000000000
--- a/target/linux/brcm47xx/patches-3.0/601-mips-remove-pci-collision-check.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -185,12 +185,10 @@ static int pcibios_enable_resources(stru
- if ((idx == PCI_ROM_RESOURCE) &&
- (!(r->flags & IORESOURCE_ROM_ENABLE)))
- continue;
-- if (!r->start && r->end) {
-- printk(KERN_ERR "PCI: Device %s not available "
-- "because of resource collisions\n",
-+ if (!r->start && r->end)
-+ printk(KERN_WARNING "PCI: Device %s resource"
-+ "collisions detected. Ignoring...\n",
- pci_name(dev));
-- return -EINVAL;
-- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
diff --git a/target/linux/brcm47xx/patches-3.0/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-3.0/610-pci_ide_fix.patch
deleted file mode 100644
index f254b203bd..0000000000
--- a/target/linux/brcm47xx/patches-3.0/610-pci_ide_fix.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/include/linux/ide.h
-+++ b/include/linux/ide.h
-@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
- hw->io_ports.ctl_addr = ctl_addr;
- }
-
-+#if defined CONFIG_BCM47XX
-+# define MAX_HWIFS 2
-+#else
- #define MAX_HWIFS 10
-+#endif
-
- /*
- * Now for the data we need to maintain per-drive: ide_drive_t
diff --git a/target/linux/brcm47xx/patches-3.0/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-3.0/700-ssb-gigabit-ethernet-driver.patch
deleted file mode 100644
index d429573f2d..0000000000
--- a/target/linux/brcm47xx/patches-3.0/700-ssb-gigabit-ethernet-driver.patch
+++ /dev/null
@@ -1,325 +0,0 @@
---- a/drivers/net/tg3.c
-+++ b/drivers/net/tg3.c
-@@ -43,6 +43,7 @@
- #include <linux/prefetch.h>
- #include <linux/dma-mapping.h>
- #include <linux/firmware.h>
-+#include <linux/ssb/ssb_driver_gige.h>
-
- #include <net/checksum.h>
- #include <net/ip.h>
-@@ -515,7 +516,8 @@ static void _tw32_flush(struct tg3 *tp,
- static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
- {
- tp->write32_mbox(tp, off, val);
-- if (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND))
-+ if (tg3_flag(tp, FLUSH_POSTED_WRITES) ||
-+ (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND)))
- tp->read32_mbox(tp, off);
- }
-
-@@ -525,7 +527,7 @@ static void tg3_write32_tx_mbox(struct t
- writel(val, mbox);
- if (tg3_flag(tp, TXD_MBOX_HWBUG))
- writel(val, mbox);
-- if (tg3_flag(tp, MBOX_WRITE_REORDER))
-+ if (tg3_flag(tp, MBOX_WRITE_REORDER) || tg3_flag(tp, FLUSH_POSTED_WRITES))
- readl(mbox);
- }
-
-@@ -804,7 +806,7 @@ static void tg3_switch_clocks(struct tg3
-
- #define PHY_BUSY_LOOPS 5000
-
--static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
-+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
- {
- u32 frame_val;
- unsigned int loops;
-@@ -818,7 +820,7 @@ static int tg3_readphy(struct tg3 *tp, i
-
- *val = 0x0;
-
-- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
-+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
- MI_COM_PHY_ADDR_MASK);
- frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
- MI_COM_REG_ADDR_MASK);
-@@ -853,7 +855,12 @@ static int tg3_readphy(struct tg3 *tp, i
- return ret;
- }
-
--static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
-+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
-+{
-+ return __tg3_readphy(tp, tp->phy_addr, reg, val);
-+}
-+
-+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
- {
- u32 frame_val;
- unsigned int loops;
-@@ -869,7 +876,7 @@ static int tg3_writephy(struct tg3 *tp,
- udelay(80);
- }
-
-- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
-+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
- MI_COM_PHY_ADDR_MASK);
- frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
- MI_COM_REG_ADDR_MASK);
-@@ -902,6 +909,11 @@ static int tg3_writephy(struct tg3 *tp,
- return ret;
- }
-
-+static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
-+{
-+ return __tg3_writephy(tp, tp->phy_addr, reg, val);
-+}
-+
- static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
- {
- int err;
-@@ -2532,6 +2544,9 @@ static int tg3_nvram_read(struct tg3 *tp
- {
- int ret;
-
-+ if (tg3_flag(tp, IS_SSB_CORE))
-+ return -ENODEV;
-+
- if (!tg3_flag(tp, NVRAM))
- return tg3_nvram_read_using_eeprom(tp, offset, val);
-
-@@ -2855,8 +2870,10 @@ static int tg3_power_down_prepare(struct
- tg3_frob_aux_power(tp);
-
- /* Workaround for unstable PLL clock */
-- if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
-- (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
-+ if ((tp->phy_id & TG3_PHY_ID_MASK) != TG3_PHY_ID_BCM5750_2 &&
-+ /* !!! FIXME !!! */
-+ ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
-+ (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
- u32 val = tr32(0x7d00);
-
- val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
-@@ -3377,6 +3394,14 @@ relink:
- if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
- tg3_phy_copper_begin(tp);
-
-+ if (tg3_flag(tp, ROBOSWITCH)) {
-+ current_link_up = 1;
-+ current_speed = SPEED_1000; /* FIXME */
-+ current_duplex = DUPLEX_FULL;
-+ tp->link_config.active_speed = current_speed;
-+ tp->link_config.active_duplex = current_duplex;
-+ }
-+
- tg3_readphy(tp, MII_BMSR, &bmsr);
- if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
- (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
-@@ -6962,6 +6987,11 @@ static int tg3_poll_fw(struct tg3 *tp)
- int i;
- u32 val;
-
-+ if (tg3_flag(tp, IS_SSB_CORE)) {
-+ /* We don't use firmware. */
-+ return 0;
-+ }
-+
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- /* Wait up to 20ms for init done. */
- for (i = 0; i < 200; i++) {
-@@ -7251,6 +7281,14 @@ static int tg3_chip_reset(struct tg3 *tp
- tw32(0x5000, 0x400);
- }
-
-+ if (tg3_flag(tp, IS_SSB_CORE)) {
-+ /* BCM4785: In order to avoid repercussions from using potentially
-+ * defective internal ROM, stop the Rx RISC CPU, which is not
-+ * required. */
-+ tg3_stop_fw(tp);
-+ tg3_halt_cpu(tp, RX_CPU_BASE);
-+ }
-+
- tw32(GRC_MODE, tp->grc_mode);
-
- if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -7403,9 +7441,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
- return -ENODEV;
- }
-
-- /* Clear firmware's nvram arbitration. */
-- if (tg3_flag(tp, NVRAM))
-- tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
-+ if (!tg3_flag(tp, IS_SSB_CORE)) {
-+ /* Clear firmware's nvram arbitration. */
-+ if (tg3_flag(tp, NVRAM))
-+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
-+ }
-+
- return 0;
- }
-
-@@ -7467,6 +7508,11 @@ static int tg3_load_5701_a0_firmware_fix
- const __be32 *fw_data;
- int err, i;
-
-+ if (tg3_flag(tp, IS_SSB_CORE)) {
-+ /* We don't use firmware. */
-+ return 0;
-+ }
-+
- fw_data = (void *)tp->fw->data;
-
- /* Firmware blob starts with version numbers, followed by
-@@ -7523,6 +7569,11 @@ static int tg3_load_tso_firmware(struct
- unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
- int err, i;
-
-+ if (tg3_flag(tp, IS_SSB_CORE)) {
-+ /* We don't use firmware. */
-+ return 0;
-+ }
-+
- if (tg3_flag(tp, HW_TSO_1) ||
- tg3_flag(tp, HW_TSO_2) ||
- tg3_flag(tp, HW_TSO_3))
-@@ -8819,6 +8870,11 @@ static void tg3_timer(unsigned long __op
-
- spin_lock(&tp->lock);
-
-+ if (tg3_flag(tp, FLUSH_POSTED_WRITES)) {
-+ /* BCM4785: Flush posted writes from GbE to host memory. */
-+ tr32(HOSTCC_MODE);
-+ }
-+
- if (!tg3_flag(tp, TAGGED_STATUS)) {
- /* All of this garbage is because when using non-tagged
- * IRQ status the mailbox/status_block protocol the chip
-@@ -10446,6 +10502,11 @@ static int tg3_test_nvram(struct tg3 *tp
- if (tg3_flag(tp, NO_NVRAM))
- return 0;
-
-+ if (tg3_flag(tp, IS_SSB_CORE)) {
-+ /* We don't have NVRAM. */
-+ return 0;
-+ }
-+
- if (tg3_nvram_read(tp, 0, &magic) != 0)
- return -EIO;
-
-@@ -11440,7 +11501,7 @@ static int tg3_ioctl(struct net_device *
- return -EAGAIN;
-
- spin_lock_bh(&tp->lock);
-- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
-+ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
- spin_unlock_bh(&tp->lock);
-
- data->val_out = mii_regval;
-@@ -11456,7 +11517,7 @@ static int tg3_ioctl(struct net_device *
- return -EAGAIN;
-
- spin_lock_bh(&tp->lock);
-- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
-+ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
- spin_unlock_bh(&tp->lock);
-
- return err;
-@@ -12186,6 +12247,13 @@ static void __devinit tg3_get_5720_nvram
- /* Chips other than 5700/5701 use the NVRAM for fetching info. */
- static void __devinit tg3_nvram_init(struct tg3 *tp)
- {
-+ if (tg3_flag(tp, IS_SSB_CORE)) {
-+ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
-+ tg3_flag_clear(tp, NVRAM);
-+ tg3_flag_clear(tp, NVRAM_BUFFERED);
-+ return;
-+ }
-+
- tw32_f(GRC_EEPROM_ADDR,
- (EEPROM_ADDR_FSM_RESET |
- (EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -12452,6 +12520,9 @@ static int tg3_nvram_write_block(struct
- {
- int ret;
-
-+ if (tg3_flag(tp, IS_SSB_CORE))
-+ return -ENODEV;
-+
- if (tg3_flag(tp, EEPROM_WRITE_PROT)) {
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
- ~GRC_LCLCTRL_GPIO_OUTPUT1);
-@@ -13863,6 +13934,11 @@ static int __devinit tg3_get_invariants(
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
- tg3_flag_set(tp, SRAM_USE_CONFIG);
-
-+ if (tg3_flag(tp, FLUSH_POSTED_WRITES)) {
-+ tp->write32_tx_mbox = tg3_write_flush_reg32;
-+ tp->write32_rx_mbox = tg3_write_flush_reg32;
-+ }
-+
- /* Get eeprom hw config before calling tg3_set_power_state().
- * In particular, the TG3_FLAG_IS_NIC flag must be
- * determined before calling tg3_set_power_state() so that
-@@ -14274,6 +14350,8 @@ static int __devinit tg3_get_device_addr
- }
-
- if (!is_valid_ether_addr(&dev->dev_addr[0])) {
-+ if (tg3_flag(tp, IS_SSB_CORE))
-+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
- #ifdef CONFIG_SPARC
- if (!tg3_get_default_macaddr_sparc(tp))
- return 0;
-@@ -14772,6 +14850,7 @@ static char * __devinit tg3_phy_string(s
- case TG3_PHY_ID_BCM5704: return "5704";
- case TG3_PHY_ID_BCM5705: return "5705";
- case TG3_PHY_ID_BCM5750: return "5750";
-+ case TG3_PHY_ID_BCM5750_2: return "5750-2";
- case TG3_PHY_ID_BCM5752: return "5752";
- case TG3_PHY_ID_BCM5714: return "5714";
- case TG3_PHY_ID_BCM5780: return "5780";
-@@ -14961,6 +15040,13 @@ static int __devinit tg3_init_one(struct
- tp->msg_enable = tg3_debug;
- else
- tp->msg_enable = TG3_DEF_MSG_ENABLE;
-+ if (pdev_is_ssb_gige_core(pdev)) {
-+ tg3_flag_set(tp, IS_SSB_CORE);
-+ if (ssb_gige_must_flush_posted_writes(pdev))
-+ tg3_flag_set(tp, FLUSH_POSTED_WRITES);
-+ if (ssb_gige_have_roboswitch(pdev))
-+ tg3_flag_set(tp, ROBOSWITCH);
-+ }
-
- /* The word/byte swap controls here control register access byte
- * swapping. DMA data byte swapping is controlled in the GRC_MODE
---- a/drivers/net/tg3.h
-+++ b/drivers/net/tg3.h
-@@ -2901,6 +2901,9 @@ enum TG3_FLAGS {
- TG3_FLAG_57765_PLUS,
- TG3_FLAG_APE_HAS_NCSI,
- TG3_FLAG_5717_PLUS,
-+ TG3_FLAG_IS_SSB_CORE,
-+ TG3_FLAG_FLUSH_POSTED_WRITES,
-+ TG3_FLAG_ROBOSWITCH,
-
- /* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */
- TG3_FLAG_NUMBER_OF_FLAGS, /* Last entry in enum TG3_FLAGS */
-@@ -3051,6 +3054,7 @@ struct tg3 {
- #define TG3_PHY_ID_BCM5704 0x60008190
- #define TG3_PHY_ID_BCM5705 0x600081a0
- #define TG3_PHY_ID_BCM5750 0x60008180
-+#define TG3_PHY_ID_BCM5750_2 0xbc050cd0
- #define TG3_PHY_ID_BCM5752 0x60008100
- #define TG3_PHY_ID_BCM5714 0x60008340
- #define TG3_PHY_ID_BCM5780 0x60008350
-@@ -3088,7 +3092,7 @@ struct tg3 {
- (X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \
- (X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \
- (X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM5719C || \
-- (X) == TG3_PHY_ID_BCM8002)
-+ (X) == TG3_PHY_ID_BCM8002 || (X) == TG3_PHY_ID_BCM5750_2)
-
- u32 phy_flags;
- #define TG3_PHYFLG_IS_LOW_POWER 0x00000001
diff --git a/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch
deleted file mode 100644
index 6bc34549fe..0000000000
--- a/target/linux/brcm47xx/patches-3.0/812-disable_wgt634u_crap.patch
+++ /dev/null
@@ -1,180 +0,0 @@
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -4,4 +4,3 @@
- #
-
- obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o
--obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
---- a/arch/mips/bcm47xx/wgt634u.c
-+++ /dev/null
-@@ -1,170 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License. See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
-- */
--
--#include <linux/platform_device.h>
--#include <linux/module.h>
--#include <linux/leds.h>
--#include <linux/mtd/physmap.h>
--#include <linux/ssb/ssb.h>
--#include <linux/interrupt.h>
--#include <linux/reboot.h>
--#include <linux/gpio.h>
--#include <asm/mach-bcm47xx/bcm47xx.h>
--
--/* GPIO definitions for the WGT634U */
--#define WGT634U_GPIO_LED 3
--#define WGT634U_GPIO_RESET 2
--#define WGT634U_GPIO_TP1 7
--#define WGT634U_GPIO_TP2 6
--#define WGT634U_GPIO_TP3 5
--#define WGT634U_GPIO_TP4 4
--#define WGT634U_GPIO_TP5 1
--
--static struct gpio_led wgt634u_leds[] = {
-- {
-- .name = "power",
-- .gpio = WGT634U_GPIO_LED,
-- .active_low = 1,
-- .default_trigger = "heartbeat",
-- },
--};
--
--static struct gpio_led_platform_data wgt634u_led_data = {
-- .num_leds = ARRAY_SIZE(wgt634u_leds),
-- .leds = wgt634u_leds,
--};
--
--static struct platform_device wgt634u_gpio_leds = {
-- .name = "leds-gpio",
-- .id = -1,
-- .dev = {
-- .platform_data = &wgt634u_led_data,
-- }
--};
--
--
--/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
-- firmware. */
--static struct mtd_partition wgt634u_partitions[] = {
-- {
-- .name = "cfe",
-- .offset = 0,
-- .size = 0x60000, /* 384k */
-- .mask_flags = MTD_WRITEABLE /* force read-only */
-- },
-- {
-- .name = "config",
-- .offset = 0x60000,
-- .size = 0x20000 /* 128k */
-- },
-- {
-- .name = "linux",
-- .offset = 0x80000,
-- .size = 0x140000 /* 1280k */
-- },
-- {
-- .name = "jffs",
-- .offset = 0x1c0000,
-- .size = 0x620000 /* 6272k */
-- },
-- {
-- .name = "nvram",
-- .offset = 0x7e0000,
-- .size = 0x20000 /* 128k */
-- },
--};
--
--static struct physmap_flash_data wgt634u_flash_data = {
-- .parts = wgt634u_partitions,
-- .nr_parts = ARRAY_SIZE(wgt634u_partitions)
--};
--
--static struct resource wgt634u_flash_resource = {
-- .flags = IORESOURCE_MEM,
--};
--
--static struct platform_device wgt634u_flash = {
-- .name = "physmap-flash",
-- .id = 0,
-- .dev = { .platform_data = &wgt634u_flash_data, },
-- .resource = &wgt634u_flash_resource,
-- .num_resources = 1,
--};
--
--/* Platform devices */
--static struct platform_device *wgt634u_devices[] __initdata = {
-- &wgt634u_flash,
-- &wgt634u_gpio_leds,
--};
--
--static irqreturn_t gpio_interrupt(int irq, void *ignored)
--{
-- int state;
--
-- /* Interrupts are shared, check if the current one is
-- a GPIO interrupt. */
-- if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
-- SSB_CHIPCO_IRQ_GPIO))
-- return IRQ_NONE;
--
-- state = gpio_get_value(WGT634U_GPIO_RESET);
--
-- /* Interrupt are level triggered, revert the interrupt polarity
-- to clear the interrupt. */
-- gpio_polarity(WGT634U_GPIO_RESET, state);
--
-- if (!state) {
-- printk(KERN_INFO "Reset button pressed");
-- ctrl_alt_del();
-- }
--
-- return IRQ_HANDLED;
--}
--
--static int __init wgt634u_init(void)
--{
-- /* There is no easy way to detect that we are running on a WGT634U
-- * machine. Use the MAC address as an heuristic. Netgear Inc. has
-- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
-- */
-- u8 *et0mac;
--
-- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
-- return -ENODEV;
--
-- et0mac = bcm47xx_bus.ssb.sprom.et0mac;
--
-- if (et0mac[0] == 0x00 &&
-- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
-- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
-- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
--
-- printk(KERN_INFO "WGT634U machine detected.\n");
--
-- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
-- gpio_interrupt, IRQF_SHARED,
-- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
-- gpio_direction_input(WGT634U_GPIO_RESET);
-- gpio_intmask(WGT634U_GPIO_RESET, 1);
-- ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
-- SSB_CHIPCO_IRQ_GPIO,
-- SSB_CHIPCO_IRQ_GPIO);
-- }
--
-- wgt634u_flash_data.width = mcore->pflash.buswidth;
-- wgt634u_flash_resource.start = mcore->pflash.window;
-- wgt634u_flash_resource.end = mcore->pflash.window
-- + mcore->pflash.window_size
-- - 1;
-- return platform_add_devices(wgt634u_devices,
-- ARRAY_SIZE(wgt634u_devices));
-- } else
-- return -ENODEV;
--}
--
--module_init(wgt634u_init);
diff --git a/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch
deleted file mode 100644
index 88a40e2bc3..0000000000
--- a/target/linux/brcm47xx/patches-3.0/820-wgt634u-nvram-fix.patch
+++ /dev/null
@@ -1,305 +0,0 @@
-The Netgear wgt634u uses a different format for storing the
-configuration. This patch is needed to read out the correct
-configuration. The cfe_env.c file uses a different method way to read
-out the configuration than the in kernel cfe config reader.
-
---- a/arch/mips/bcm47xx/Makefile
-+++ b/arch/mips/bcm47xx/Makefile
-@@ -3,4 +3,4 @@
- # under Linux.
- #
-
--obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o
-+obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o bus.o cfe_env.o
---- /dev/null
-+++ b/arch/mips/bcm47xx/cfe_env.c
-@@ -0,0 +1,229 @@
-+/*
-+ * CFE environment variable access
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+#define NVRAM_SIZE (0x1ff0)
-+static char _nvdata[NVRAM_SIZE];
-+static char _valuestr[256];
-+
-+/*
-+ * TLV types. These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ *
-+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
-+ * indicates the size of the length field.
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
-+#define ENV_LENGTH_8BITS 0x01
-+
-+#define ENV_TYPE_USER 0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END 0x00
-+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags
-+ */
-+
-+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
-+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
-+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
-+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
-+
-+
-+/* *********************************************************************
-+ * _nvram_read(buffer,offset,length)
-+ *
-+ * Read data from the NVRAM device
-+ *
-+ * Input parameters:
-+ * buffer - destination buffer
-+ * offset - offset of data to read
-+ * length - number of bytes to read
-+ *
-+ * Return value:
-+ * number of bytes read, or <0 if error occured
-+ ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+ int i;
-+ if (offset > NVRAM_SIZE)
-+ return -1;
-+
-+ for ( i = 0; i < length; i++) {
-+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+ }
-+ return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+ while (*dest && (cnt > 0)) {
-+ if (*dest == c) return (char *) dest;
-+ dest++;
-+ cnt--;
-+ }
-+ return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param name name of variable to get
-+ * @return value of variable or NULL if undefined
-+ */
-+
-+char*
-+cfe_env_get(unsigned char *nv_buf, char* name)
-+{
-+ int size;
-+ unsigned char *buffer;
-+ unsigned char *ptr;
-+ unsigned char *envval;
-+ unsigned int reclen;
-+ unsigned int rectype;
-+ int offset;
-+ int flg;
-+
-+ if (!strcmp(name, "nvram_type"))
-+ return "cfe";
-+
-+ size = NVRAM_SIZE;
-+ buffer = &_nvdata[0];
-+
-+ ptr = buffer;
-+ offset = 0;
-+
-+ /* Read the record type and length */
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+ goto error;
-+ }
-+
-+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
-+
-+ /* Adjust pointer for TLV type */
-+ rectype = *(ptr);
-+ offset++;
-+ size--;
-+
-+ /*
-+ * Read the length. It can be either 1 or 2 bytes
-+ * depending on the code
-+ */
-+ if (rectype & ENV_LENGTH_8BITS) {
-+ /* Read the record type and length - 8 bits */
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+ goto error;
-+ }
-+ reclen = *(ptr);
-+ size--;
-+ offset++;
-+ }
-+ else {
-+ /* Read the record type and length - 16 bits, MSB first */
-+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+ goto error;
-+ }
-+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+ size -= 2;
-+ offset += 2;
-+ }
-+
-+ if (reclen > size)
-+ break; /* should not happen, bad NVRAM */
-+
-+ switch (rectype) {
-+ case ENV_TLV_TYPE_ENV:
-+ /* Read the TLV data */
-+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+ goto error;
-+ flg = *ptr++;
-+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+ if (envval) {
-+ *envval++ = '\0';
-+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0
-+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+ if(!strcmp(ptr, name)){
-+ return _valuestr;
-+ }
-+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+ return _valuestr;
-+ }
-+ break;
-+
-+ default:
-+ /* Unknown TLV type, skip it. */
-+ break;
-+ }
-+
-+ /*
-+ * Advance to next TLV
-+ */
-+
-+ size -= (int)reclen;
-+ offset += reclen;
-+
-+ /* Read the next record type */
-+ ptr = buffer;
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+ goto error;
-+ }
-+
-+error:
-+ return NULL;
-+
-+}
-+
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -23,6 +23,8 @@
- #include <asm/mach-bcm47xx/bus.h>
-
- static char nvram_buf[NVRAM_SPACE];
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
-
- /* Probe for NVRAM header */
- static void early_nvram_init_pflash(void)
-@@ -59,6 +61,25 @@ static void early_nvram_init_pflash(void
- break;
- #endif
- }
-+ cfe_env = 0;
-+
-+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+ if (lim >= 8 * 1024 * 1024) {
-+ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
-+ dst = (u32 *) nvram_buf;
-+
-+ if ((*src & 0xff00ff) == 0x000001) {
-+ printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+ for (i = 0; i < 0x1ff0; i++) {
-+ if (*src == 0xFFFFFFFF)
-+ break;
-+ *dst++ = *src++;
-+ }
-+ cfe_env = 1;
-+ return;
-+ }
-+ }
-
- off = FLASH_MIN;
- while (off <= lim) {
-@@ -181,6 +202,12 @@ int nvram_getenv(char *name, char *val,
- if (!nvram_buf[0])
- early_nvram_init();
-
-+ if (cfe_env) {
-+ value = cfe_env_get(nvram_buf, name);
-+ snprintf(val, val_len, "%s", value);
-+ return 0;
-+ }
-+
- /* Look for name=value and return value */
- var = &nvram_buf[sizeof(struct nvram_header)];
- end = nvram_buf + sizeof(nvram_buf) - 2;
-@@ -210,6 +237,9 @@ char *nvram_get(const char *name)
- if (!nvram_buf[0])
- early_nvram_init();
-
-+ if (cfe_env)
-+ return cfe_env_get(nvram_buf, name);
-+
- /* Look for name=value and return value */
- var = &nvram_buf[sizeof(struct nvram_header)];
- end = nvram_buf + sizeof(nvram_buf) - 2;
diff --git a/target/linux/brcm47xx/patches-3.0/830-tg3_add_pci_ids.patch b/target/linux/brcm47xx/patches-3.0/830-tg3_add_pci_ids.patch
deleted file mode 100644
index faa9380fad..0000000000
--- a/target/linux/brcm47xx/patches-3.0/830-tg3_add_pci_ids.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-commit 812bcf8f47b45a206948008144233bc47d5747ac
-Author: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu Dec 16 20:01:17 2010 +0100
-
- Revert "tg3: Remove 5720, 5750, and 5750M"
-
- This reverts commit 67b284d476bcb3d100e946da23d6cf9acfd0465c.
-
---- a/drivers/net/tg3.c
-+++ b/drivers/net/tg3.c
-@@ -235,9 +235,12 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_t
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5901_2)},
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5704S_2)},
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705F)},
-+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5720)},
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)},
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)},
-+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)},
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)},
-+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750M)},
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)},
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F)},
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752)},
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -2077,6 +2077,7 @@
- #define PCI_DEVICE_ID_NX2_57711E 0x1650
- #define PCI_DEVICE_ID_TIGON3_5705 0x1653
- #define PCI_DEVICE_ID_TIGON3_5705_2 0x1654
-+#define PCI_DEVICE_ID_TIGON3_5720 0x1658
- #define PCI_DEVICE_ID_TIGON3_5721 0x1659
- #define PCI_DEVICE_ID_TIGON3_5722 0x165a
- #define PCI_DEVICE_ID_TIGON3_5723 0x165b
-@@ -2092,11 +2093,13 @@
- #define PCI_DEVICE_ID_TIGON3_5754M 0x1672
- #define PCI_DEVICE_ID_TIGON3_5755M 0x1673
- #define PCI_DEVICE_ID_TIGON3_5756 0x1674
-+#define PCI_DEVICE_ID_TIGON3_5750 0x1676
- #define PCI_DEVICE_ID_TIGON3_5751 0x1677
- #define PCI_DEVICE_ID_TIGON3_5715 0x1678
- #define PCI_DEVICE_ID_TIGON3_5715S 0x1679
- #define PCI_DEVICE_ID_TIGON3_5754 0x167a
- #define PCI_DEVICE_ID_TIGON3_5755 0x167b
-+#define PCI_DEVICE_ID_TIGON3_5750M 0x167c
- #define PCI_DEVICE_ID_TIGON3_5751M 0x167d
- #define PCI_DEVICE_ID_TIGON3_5751F 0x167e
- #define PCI_DEVICE_ID_TIGON3_5787F 0x167f
diff --git a/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch b/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch
deleted file mode 100644
index d60247e91a..0000000000
--- a/target/linux/brcm47xx/patches-3.0/900-bcm47xx_wdt-noprescale.patch
+++ /dev/null
@@ -1,104 +0,0 @@
---- a/drivers/watchdog/bcm47xx_wdt.c
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -31,6 +31,7 @@
-
- #define WDT_DEFAULT_TIME 30 /* seconds */
- #define WDT_MAX_TIME 255 /* seconds */
-+#define WDT_SHIFT 15 /* 32.768 KHz on cores with slow WDT clock */
-
- static int wdt_time = WDT_DEFAULT_TIME;
- static int nowayout = WATCHDOG_NOWAYOUT;
-@@ -50,20 +51,20 @@ static unsigned long bcm47xx_wdt_busy;
- static char expect_release;
- static struct timer_list wdt_timer;
- static atomic_t ticks;
-+static int needs_sw_scale;
-
--static inline void bcm47xx_wdt_hw_start(void)
-+static inline void bcm47xx_wdt_hw_start(u32 ticks)
- {
-- /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
- switch (bcm47xx_bus_type) {
- #ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
-- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
-+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, ticks);
- break;
- #endif
- #ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
-- 0xfffffff);
-+ ticks);
- break;
- #endif
- }
-@@ -88,33 +89,34 @@ static inline int bcm47xx_wdt_hw_stop(vo
- static void bcm47xx_timer_tick(unsigned long unused)
- {
- if (!atomic_dec_and_test(&ticks)) {
-- bcm47xx_wdt_hw_start();
-+ /* This is 2,5s on 100Mhz clock and 2s on 133 Mhz */
-+ bcm47xx_wdt_hw_start(0xfffffff);
- mod_timer(&wdt_timer, jiffies + HZ);
- } else {
-- printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n");
-+ printk(KERN_CRIT DRV_NAME ": Watchdog will fire soon!!!\n");
- }
- }
-
--static inline void bcm47xx_wdt_pet(void)
-+static void bcm47xx_wdt_pet(void)
- {
-- atomic_set(&ticks, wdt_time);
-+ if(needs_sw_scale)
-+ atomic_set(&ticks, wdt_time);
-+ else
-+ bcm47xx_wdt_hw_start(wdt_time << WDT_SHIFT);
- }
-
- static void bcm47xx_wdt_start(void)
- {
- bcm47xx_wdt_pet();
-- bcm47xx_timer_tick(0);
--}
--
--static void bcm47xx_wdt_pause(void)
--{
-- del_timer_sync(&wdt_timer);
-- bcm47xx_wdt_hw_stop();
-+ if(needs_sw_scale)
-+ bcm47xx_timer_tick(0);
- }
-
- static void bcm47xx_wdt_stop(void)
- {
-- bcm47xx_wdt_pause();
-+ if(needs_sw_scale)
-+ del_timer_sync(&wdt_timer);
-+ bcm47xx_wdt_hw_stop();
- }
-
- static int bcm47xx_wdt_settimeout(int new_time)
-@@ -266,7 +268,20 @@ static int __init bcm47xx_wdt_init(void)
- if (bcm47xx_wdt_hw_stop() < 0)
- return -ENODEV;
-
-- setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
-+ /* FIXME Other cores */
-+#ifdef BCM47XX_BUS_TYPE_BCMA
-+ if(bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA &&
-+ bcm47xx_bus.ssb.chip_id == 0x5354) {
-+ /* Slow WDT clock, no pre-scaling */
-+ needs_sw_scale = 0;
-+ } else {
-+#endif
-+ /* Fast WDT clock, needs software pre-scaling */
-+ needs_sw_scale = 1;
-+ setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
-+#ifdef BCM47XX_BUS_TYPE_BCMA
-+ }
-+#endif
-
- if (bcm47xx_wdt_settimeout(wdt_time)) {
- bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);
diff --git a/target/linux/brcm47xx/patches-3.0/920-cache-wround.patch b/target/linux/brcm47xx/patches-3.0/920-cache-wround.patch
deleted file mode 100644
index 5d96b0b191..0000000000
--- a/target/linux/brcm47xx/patches-3.0/920-cache-wround.patch
+++ /dev/null
@@ -1,138 +0,0 @@
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -20,10 +20,28 @@
- #ifdef CONFIG_BCM47XX
- #include <asm/paccess.h>
- #include <linux/ssb/ssb.h>
--#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
-+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
-+
-+static inline unsigned long bcm4710_dummy_rreg(void)
-+{
-+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
-+}
-+
-+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
-+
-+static inline unsigned long bcm4710_fill_tlb(void *addr)
-+{
-+ return *(unsigned long *)addr;
-+}
-+
-+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
-+
-+static inline void bcm4710_protected_fill_tlb(void *addr)
-+{
-+ unsigned long x;
-+ get_dbe(x, (unsigned long *)addr);;
-+}
-
--#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
--#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
- #else
- #define BCM4710_DUMMY_RREG()
-
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -835,6 +835,9 @@ build_get_pgde32(u32 **p, unsigned int t
- #endif
- uasm_i_addu(p, ptr, tmp, ptr);
- #else
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- UASM_i_LA_mostly(p, ptr, pgdc);
- #endif
- uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -1188,12 +1191,12 @@ static void __cpuinit build_r4000_tlb_re
- /* No need for uasm_i_nop */
- }
-
--#ifdef CONFIG_BCM47XX
-- uasm_i_nop(&p);
--#endif
- #ifdef CONFIG_64BIT
- build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-+# ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+# endif
- build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
- #endif
-
-@@ -1205,6 +1208,9 @@ static void __cpuinit build_r4000_tlb_re
- build_update_entries(&p, K0, K1);
- build_tlb_write_entry(&p, &l, &r, tlb_random);
- uasm_l_leave(&l, p);
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+#endif
- uasm_i_eret(&p); /* return from trap */
- }
- #ifdef CONFIG_HUGETLB_PAGE
-@@ -1710,12 +1716,12 @@ build_r4000_tlbchange_handler_head(u32 *
- struct uasm_reloc **r, unsigned int pte,
- unsigned int ptr)
- {
--#ifdef CONFIG_BCM47XX
-- uasm_i_nop(p);
--#endif
- #ifdef CONFIG_64BIT
- build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
- #else
-+# ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+# endif
- build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
- #endif
-
-@@ -1752,6 +1758,9 @@ build_r4000_tlbchange_handler_tail(u32 *
- build_update_entries(p, tmp, ptr);
- build_tlb_write_entry(p, l, r, tlb_indexed);
- uasm_l_leave(l, *p);
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- uasm_i_eret(p); /* return from trap */
-
- #ifdef CONFIG_64BIT
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -22,6 +22,19 @@
- #include <asm/page.h>
- #include <asm/thread_info.h>
-
-+#ifdef CONFIG_BCM47XX
-+# ifdef eret
-+# undef eret
-+# endif
-+# define eret \
-+ .set push; \
-+ .set noreorder; \
-+ nop; \
-+ nop; \
-+ eret; \
-+ .set pop;
-+#endif
-+
- #define PANIC_PIC(msg) \
- .set push; \
- .set reorder; \
-@@ -54,7 +67,6 @@ NESTED(except_vec3_generic, 0, sp)
- .set noat
- #ifdef CONFIG_BCM47XX
- nop
-- nop
- #endif
- #if R5432_CP0_INTERRUPT_WAR
- mfc0 k0, CP0_INDEX
-@@ -79,6 +91,9 @@ NESTED(except_vec3_r4000, 0, sp)
- .set push
- .set mips3
- .set noat
-+#ifdef CONFIG_BCM47XX
-+ nop
-+#endif
- mfc0 k1, CP0_CAUSE
- li k0, 31<<2
- andi k1, k1, 0x7c
diff --git a/target/linux/brcm47xx/patches-3.0/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-3.0/940-bcm47xx-yenta.patch
deleted file mode 100644
index c65958eda8..0000000000
--- a/target/linux/brcm47xx/patches-3.0/940-bcm47xx-yenta.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
- * Probe for usable interrupts using the force
- * register to generate bogus card status events.
- */
-+#ifndef CONFIG_BCM47XX
-+ /* WRT54G3G does not like this */
- cb_writel(socket, CB_SOCKET_EVENT, -1);
- cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- reg = exca_readb(socket, I365_CSCINT);
-@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
- }
- cb_writel(socket, CB_SOCKET_MASK, 0);
- exca_writeb(socket, I365_CSCINT, reg);
-+#endif
-
- mask = probe_irq_mask(val) & 0xffff;
-
-@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
- else
- socket->socket.irq_mask = 0;
-
-+ /* irq mask probing is broken for the WRT54G3G */
-+ if (socket->socket.irq_mask == 0)
-+ socket->socket.irq_mask = 0x6f8;
-+
- dev_printk(KERN_INFO, &socket->dev->dev,
- "ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->socket.irq_mask, socket->cb_irq);
-@@ -1257,6 +1264,15 @@ static int __devinit yenta_probe(struct
- dev_printk(KERN_INFO, &dev->dev,
- "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
-
-+ /* Generate an interrupt on card insert/remove */
-+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+ /* Set up Multifunction Routing Status Register */
-+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+ /* Switch interrupts to parallelized */
-+ config_writeb(socket, 0x92, 0x64);
-+
- yenta_fixup_parent_bridge(dev->subordinate);
-
- /* Register it with the pcmcia layer.. */
diff --git a/target/linux/brcm47xx/patches-3.0/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-3.0/976-ssb_increase_pci_delay.patch
deleted file mode 100644
index 0650c25683..0000000000
--- a/target/linux/brcm47xx/patches-3.0/976-ssb_increase_pci_delay.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -375,7 +375,7 @@ static void __devinit ssb_pcicore_init_h
- set_io_port_base(ssb_pcicore_controller.io_map_base);
- /* Give some time to the PCI controller to configure itself with the new
- * values. Not waiting at this point causes crashes of the machine. */
-- mdelay(10);
-+ mdelay(300);
- register_pci_controller(&ssb_pcicore_controller);
- }
-
diff --git a/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch
deleted file mode 100644
index 019b9932bd..0000000000
--- a/target/linux/brcm47xx/patches-3.0/980-wnr834b_no_cardbus_invariant.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -277,6 +277,10 @@ static int bcm47xx_get_invariants(struct
- if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
- iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
-
-+ /* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
-+ if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
-+ iv->has_cardbus_slot = 0;
-+
- return 0;
- }
-
diff --git a/target/linux/brcm47xx/patches-3.0/999-wl_exports.patch b/target/linux/brcm47xx/patches-3.0/999-wl_exports.patch
deleted file mode 100644
index b3aa126753..0000000000
--- a/target/linux/brcm47xx/patches-3.0/999-wl_exports.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm47xx/nvram.c
-+++ b/arch/mips/bcm47xx/nvram.c
-@@ -22,7 +22,8 @@
- #include <asm/mach-bcm47xx/bcm47xx.h>
- #include <asm/mach-bcm47xx/bus.h>
-
--static char nvram_buf[NVRAM_SPACE];
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
- static int cfe_env;
- extern char *cfe_env_get(char *nv_buf, const char *name);
-
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
-
- #endif /* CONFIG_DMA_NONCOHERENT */
-