aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorMathias Kresin <dev@kresin.me>2018-02-17 09:54:57 +0100
committerMathias Kresin <dev@kresin.me>2018-02-20 19:25:17 +0100
commitcb741654e5b9b659ffc7cb5c1e1fa362aa8c4652 (patch)
treecb7cb37100af81b774ca6f93222e2265b30b046a /target/linux
parentc330408ea92d9bf6af187b90d2f3f513d4d8ed8a (diff)
downloadupstream-cb741654e5b9b659ffc7cb5c1e1fa362aa8c4652.tar.gz
upstream-cb741654e5b9b659ffc7cb5c1e1fa362aa8c4652.tar.bz2
upstream-cb741654e5b9b659ffc7cb5c1e1fa362aa8c4652.zip
ramips: improve GnuBee Personal Cloud Two support
Use the generic board detection for the GnuBee Personal Cloud Two instead of the target specific one as all recent additions are doing. Fixup the pinmux to set all pins used as GPIO to the function GPIO. Request pins where used. Drop the i2c from the dts. There is nothing connected. While at it fix an indentation issue and use references instead of duplicating the whole node path. Use the same switch config as for the GB-PC1 and drop the led trigger for the not supported IP1001 phy connected to second rgmii. Fixes: c60a21532bc9 ("ramips: Add support for the GnuBee Personal Cloud Two") Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds9
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network7
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh2
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh2
-rw-r--r--target/linux/ramips/dts/GB-PC2.dts31
-rw-r--r--target/linux/ramips/image/mt7621.mk4
7 files changed, 22 insertions, 36 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 573dd31c64..16d38dd5fe 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -187,16 +187,11 @@ fonera20n)
set_usb_led "$boardname:orange:usb"
set_wifi_led "$boardname:orange:wifi"
;;
-gb-pc1)
+gb-pc1|\
+gnubee,gb-pc2)
ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
;;
-gb-pc2)
- ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x01"
- ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x10"
- ucidef_set_led_netdev "eth1-g" "eth1-g" "$board:green:eth1-g" "eth1"
- ucidef_set_led_netdev "eth1-y" "eth1-y" "$board:green:eth1-y" "eth1"
- ;;
gl-mt300a|\
gl-mt300n|\
gl-mt750)
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 4208321e69..946810b3e2 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -202,14 +202,11 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
;;
- gb-pc1)
+ gb-pc1|\
+ gnubee,gb-pc2)
ucidef_add_switch "switch0" \
"0:lan" "4:lan" "6@eth0"
;;
- gb-pc2)
- ucidef_add_switch "switch0" \
- "4:lan" "0:wan" "6@eth0"
- ;;
gl-mt300n-v2)
ucidef_add_switch "switch0" \
"1:lan" "0:wan" "6@eth0"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 04a398c826..c5f62ab66d 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -91,7 +91,7 @@ get_status_led() {
dir-620-d1|\
dwr-512-b|\
gb-pc1|\
- gb-pc2|\
+ gnubee,gb-pc2|\
hpm|\
hw550-3g|\
mac1200rv2|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 74ed5913b8..75474fbc6d 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -205,9 +205,6 @@ ramips_board_detect() {
*"GB-PC1")
name="gb-pc1"
;;
- *"GB-PC2")
- name="gb-pc2"
- ;;
*"GL-MT300A")
name="gl-mt300a"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index fd0198263e..23d31e9463 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -61,7 +61,7 @@ platform_check_image() {
fonera20n|\
freestation5|\
gb-pc1|\
- gb-pc2|\
+ gnubee,gb-pc2|\
gl-mt300a|\
gl-mt300n|\
gl-mt750|\
diff --git a/target/linux/ramips/dts/GB-PC2.dts b/target/linux/ramips/dts/GB-PC2.dts
index f31ac2b843..ccaf54f3c8 100644
--- a/target/linux/ramips/dts/GB-PC2.dts
+++ b/target/linux/ramips/dts/GB-PC2.dts
@@ -18,12 +18,6 @@
bootargs = "console=ttyS0,57600";
};
- palmbus: palmbus@1E000000 {
- i2c@900 {
- status = "okay";
- };
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -50,23 +44,23 @@
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
- lan {
- label = "gb-pc2:green:lan";
+ lan1 {
+ label = "gb-pc2:green:lan1";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
- wan {
- label = "gb-pc2:green:wan";
+ lan2 {
+ label = "gb-pc2:green:lan2";
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
- eth1-y {
- label = "gb-pc2:yellow:eth1-y";
+ lan3-yellow {
+ label = "gb-pc2:yellow:lan3";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
- eth1-g {
- label = "gb-pc2:green:eth1-g";
+ lan3-green {
+ label = "gb-pc2:green:lan3";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
@@ -75,6 +69,9 @@
&sdhci {
status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
};
&spi0 {
@@ -114,8 +111,8 @@
};
&cpuclock {
- compatible = "fixed-clock";
- clock-frequency = <900000000>;
+ compatible = "fixed-clock";
+ clock-frequency = <900000000>;
};
&pcie {
@@ -129,7 +126,7 @@
&pinctrl {
state_default: pinctrl0 {
gpio {
- ralink,group = "uart3";
+ ralink,group = "jtag", "rgmii3", "uart3", "wdt";
ralink,function = "gpio";
};
};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index f0b5a8444f..d3dfb237b6 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -83,13 +83,13 @@ define Device/gb-pc1
endef
TARGET_DEVICES += gb-pc1
-define Device/gb-pc2
+define Device/gnubee_gb-pc2
DTS := GB-PC2
DEVICE_TITLE := GnuBee Personal Cloud Two
DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620
IMAGE_SIZE := $(ralink_default_fw_size_32M)
endef
-TARGET_DEVICES += gb-pc2
+TARGET_DEVICES += gnubee_gb-pc2
define Device/hc5962
DTS := HC5962