aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-04-08 14:43:04 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-04-14 12:03:57 +0200
commitd0cb6e995b6d6fc3aef52e46749449c46f3e8aa7 (patch)
tree5297b1a2829c6b4c386a0e1999f089075bccfb0e /target
parent9fd36f54f53f2cd0f93116b3278b1d7f6219b6bb (diff)
downloadupstream-d0cb6e995b6d6fc3aef52e46749449c46f3e8aa7.tar.gz
upstream-d0cb6e995b6d6fc3aef52e46749449c46f3e8aa7.tar.bz2
upstream-d0cb6e995b6d6fc3aef52e46749449c46f3e8aa7.zip
ath79: further fixes for ZyXEL NBG6716
This applies further fixes to the DTS of ZyXEL NBG6716 based on what is found in ar71xx (mach-nbg6716.c): - use WiFi label names as in ar71xx - fix WPS gpio number - fix GPIO_ACTIVE_HIGH and mode for WiFi switch - add codes for USB eject buttons - fix node name for "internet" LED This device has separate LEDs for WAN and "Internet". As the WAN-LED (and the four LAN-LEDs) are driven independent of the setup in DT/01_leds, the "internet" LED is left unassigned (in contrast to ar71xx, where it was set up effectively as a second WAN LED) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts17
1 files changed, 10 insertions, 7 deletions
diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
index 7fff1a78d9..2f00d0ba4d 100644
--- a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
+++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
@@ -29,7 +29,7 @@
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
- wan {
+ internet {
label = "nbg6716:white:internet";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
@@ -48,21 +48,21 @@
trigger-sources = <&hub_port0>;
};
- wifi2 {
- label = "nbg6716:white:wifi2";
+ wifi2g {
+ label = "nbg6716:white:wifi2g";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
- wifi5 {
- label = "nbg6716:white:wifi5";
+ wifi5g {
+ label = "nbg6716:white:wifi5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps {
label = "nbg6716:white:wps";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
@@ -79,18 +79,21 @@
wifi {
label = "WiFi button";
linux,code = <KEY_RFKILL>;
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
usb1 {
label = "USB1 eject button";
+ linux,code = <BTN_1>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
usb2 {
label = "USB2 eject button";
+ linux,code = <BTN_2>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};