diff options
author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-12-08 15:18:17 +0900 |
---|---|---|
committer | Christian Lamparter <chunkeey@gmail.com> | 2018-12-24 19:18:07 +0100 |
commit | c566439c9bf3cf2b4e5e5a059332c64199d97611 (patch) | |
tree | 88e55e4b1cbf4911e29df8e7ad31e341882d7aae /tools/Makefile | |
parent | 99df98442e1101607e3e6c902d5d957e72cea1d6 (diff) | |
download | upstream-c566439c9bf3cf2b4e5e5a059332c64199d97611.tar.gz upstream-c566439c9bf3cf2b4e5e5a059332c64199d97611.tar.bz2 upstream-c566439c9bf3cf2b4e5e5a059332c64199d97611.zip |
ath79: add support for NEC Aterm WG800HP
NEC Aterm WG800HP is a 2.4/5 GHz band 11ac router, based on Qualcomm
Atheros QCA9563.
Specification:
- Qualcomm Atheros QCA9563
- 64 MB of RAM (DDR2)
- 8 MB of Flash (SPI-NOR)
- 2.4/5 GHz wifi
- 2.4 GHz: 2T2R (SoC internal)
- 5 GHz: 1T1R (QCA9887)
- 4x 10/100/1000 Mbps Ethernet
- 8x LEDs, 3x keys (2x buttons, 1x slide-switch)
- UART through-hole on PCB (J2)
- Vcc, GND, NC, TX, RX from SoC side
- 115200n8
Flash instruction using factory image:
1. Connect the computer to the LAN port on WG800HP
2. Connect power cable to WG800HP and turn on it
3. Access to "http://192.168.10.1/" and open firmware update page
("ファームウェア更新")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'tools/Makefile')
0 files changed, 0 insertions, 0 deletions