diff options
author | Andreas Wiese <aw-openwrt@meterriblecrew.net> | 2020-05-27 15:31:30 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-31 15:44:05 +0200 |
commit | c764c512ac18ce9724b3fb0e476831150817c162 (patch) | |
tree | 1e9d99d246846b38ba5e8ca95160a073ba967c03 /tools/firmware-utils/src/pc1crypt.c | |
parent | 7e513136c63108bf55b38be4d2b65aa00b0d2b26 (diff) | |
download | upstream-c764c512ac18ce9724b3fb0e476831150817c162.tar.gz upstream-c764c512ac18ce9724b3fb0e476831150817c162.tar.bz2 upstream-c764c512ac18ce9724b3fb0e476831150817c162.zip |
ath79: add support for TP-Link RE450 v3
TP-Link RE450 v3 is a dual band router/range-extender based on
Qualcomm/Atheros QCA9563 + QCA9880.
This device is nearly identical to RE450 v2 besides a modified flash
layout (hence I think force-flashing a RE450v2 image will lead to at
least loss of MAC address).
Specification:
- 775 MHz CPU
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 1x 10/100/1000 Mbps Ethernet (AR8033 PHY)
- 7x LED, 4x button-
- possible UART header on PCB¹
Flash instruction:
Apply factory image in OEM firmware web-gui.
¹ Didn't check to connect as I didn't even manage to connect on
RE450v2 (AFAIU it requires disconnecting some resistors, which I was
too much of a coward to do). But given the similarities to v2 I
think it's the same or very similar procedure (and most likely also
the only way to debrick).
Signed-off-by: Andreas Wiese <aw-openwrt@meterriblecrew.net>
[remove dts-v1 and compatible in DTSI]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'tools/firmware-utils/src/pc1crypt.c')
0 files changed, 0 insertions, 0 deletions