diff options
| author | Chris Blake <chrisrblake93@gmail.com> | 2019-05-05 12:56:03 -0500 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-05-18 16:44:41 +0200 |
| commit | aee5c9861996983394ac49f91a831c4641a4bf83 (patch) | |
| tree | 9a7bf1ad39ce0b9c8706e5798efc937c1082112d /tools/isl | |
| parent | 2fdd02cc7c3516c2cce2ace2c7b539e0821ecbe8 (diff) | |
| download | upstream-aee5c9861996983394ac49f91a831c4641a4bf83.tar.gz upstream-aee5c9861996983394ac49f91a831c4641a4bf83.tar.bz2 upstream-aee5c9861996983394ac49f91a831c4641a4bf83.zip | |
ath79: add support for Aruba AP-105
SoC: Atheros AR7161-8C1A @ 680 MHz
RAM: 128MB - 2x Etron Technology EM6AB160TSA-5G
NOR: 16MB - 1x MXIC MX25L12845EMI-10G (SPI-NOR)
WI1: Atheros AR9223-AC1A 802.11bgn
WI2: Atheros AR9220-AC1A 802.11an
ETH: Atheros AR8021-BL1E + PoE
LED: Dual-Color Power/Status, Ethernet, WLAN2G and WLAN5G
BTN: 1 x Reset
I2C: AT97SC4303s TPM (needs driver!)
CON: RS232-level 8P8C/RJ45 Console Port - 9600 Baud
Factory installation:
- Needs a u-boot replacement. See Wiki for
information on how to do a in-circut flash with
a SPI-Flasher like a CH314A or flashrom. Wiki page
can be found at https://openwrt.org/toh/aruba/aruba_ap-105
- Be careful when dis- and reassembling the device to
not squish any of the antenna cables in the process!
- Be sure to make a full 16 MiB backup of your device
before flashing the new u-boot! This is needed if you
ever have interest in reverting back to stock firmware.
Not working:
- TPM (needs a driver)
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Diffstat (limited to 'tools/isl')
0 files changed, 0 insertions, 0 deletions