aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--package/kernel/mac80211/Makefile8
-rw-r--r--package/kernel/mac80211/broadcom.mk2
-rw-r--r--package/kernel/mac80211/patches/ath/070-ath_common_config.patch3
-rw-r--r--package/kernel/mac80211/patches/ath/080-ath10k_thermal_config.patch4
-rw-r--r--package/kernel/mac80211/patches/ath/356-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch4
-rw-r--r--package/kernel/mac80211/patches/ath/365-ath9k-adjust-tx-power-reduction-for-US-regulatory-do.patch2
-rw-r--r--package/kernel/mac80211/patches/ath/381-ath9k-fix-tx99-with-monitor-mode-interface.patch92
-rw-r--r--package/kernel/mac80211/patches/ath/395-ath9k-add-back-support-for-using-active-monitor-inte.patch96
-rw-r--r--package/kernel/mac80211/patches/ath/402-ath_regd_optional.patch2
-rw-r--r--package/kernel/mac80211/patches/ath/404-regd_no_assoc_hints.patch10
-rw-r--r--package/kernel/mac80211/patches/ath/405-ath_regd_us.patch4
-rw-r--r--package/kernel/mac80211/patches/ath/407-regd_add_extra_country_codes.patch35
-rw-r--r--package/kernel/mac80211/patches/ath/410-ath9k_allow_adhoc_and_ap.patch2
-rw-r--r--package/kernel/mac80211/patches/ath/411-ath5k_allow_adhoc_and_ap.patch6
-rw-r--r--package/kernel/mac80211/patches/ath/500-ath9k_eeprom_debugfs.patch4
-rw-r--r--package/kernel/mac80211/patches/ath/501-ath9k_ahb_init.patch2
-rw-r--r--package/kernel/mac80211/patches/ath/512-ath9k_channelbw_debugfs.patch4
-rw-r--r--package/kernel/mac80211/patches/ath/530-ath9k_extra_leds.patch16
-rw-r--r--package/kernel/mac80211/patches/ath/542-ath9k_debugfs_diag.patch4
-rw-r--r--package/kernel/mac80211/patches/ath/543-ath9k_entropy_from_adc.patch12
-rw-r--r--package/kernel/mac80211/patches/ath/545-ath9k_ani_ws_detect.patch2
-rw-r--r--package/kernel/mac80211/patches/ath/548-ath9k_enable_gpio_chip.patch4
-rw-r--r--package/kernel/mac80211/patches/ath/549-ath9k_enable_gpio_buttons.patch2
-rw-r--r--package/kernel/mac80211/patches/ath/551-ath9k_ubnt_uap_plus_hsr.patch2
-rw-r--r--package/kernel/mac80211/patches/ath/552-ahb_of.patch2
-rw-r--r--package/kernel/mac80211/patches/ath/554-ath9k-dynack-move-debug-log-after-buffer-increments.patch88
-rw-r--r--package/kernel/mac80211/patches/ath/557-ath9k-dynack-remove-experimental-tag.patch22
-rw-r--r--package/kernel/mac80211/patches/ath/921-ath10k_init_devices_synchronously.patch4
-rw-r--r--package/kernel/mac80211/patches/ath/930-ath10k_add_tpt_led_trigger.patch6
-rw-r--r--package/kernel/mac80211/patches/ath/960-0010-ath10k-limit-htt-rx-ring-size.patch2
-rw-r--r--package/kernel/mac80211/patches/ath/960-0011-ath10k-limit-pci-buffer-size.patch8
-rw-r--r--package/kernel/mac80211/patches/ath/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch10
-rw-r--r--package/kernel/mac80211/patches/ath/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch4
-rw-r--r--package/kernel/mac80211/patches/ath/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch72
-rw-r--r--package/kernel/mac80211/patches/ath/975-ath10k-use-tpt-trigger-by-default.patch8
-rw-r--r--package/kernel/mac80211/patches/ath/976-ath10k-Limit-available-channels-via-DT-ieee80211-fre.patch39
-rw-r--r--package/kernel/mac80211/patches/ath/977-ath10k-add-support-for-configuring-management-packet.patch89
-rw-r--r--package/kernel/mac80211/patches/ath/978-ath10k-fix-possible-out-of-bound-access-of-ath10k_ra.patch66
-rw-r--r--package/kernel/mac80211/patches/ath/979-ath10k-fix-incorrect-multicast-broadcast-rate-settin.patch6
-rw-r--r--package/kernel/mac80211/patches/ath/980-ath10k-fix-max-antenna-gain-unit.patch6
-rw-r--r--package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch10
-rw-r--r--package/kernel/mac80211/patches/brcm/040-brcmutil_option.patch3
-rw-r--r--package/kernel/mac80211/patches/brcm/300-v4.20-0001-brcmfmac-add-CYW89342-mini-PCIe-device.patch25
-rw-r--r--package/kernel/mac80211/patches/brcm/302-v4.20-0001-brcmfmac-fix-wrong-strnchr-usage.patch38
-rw-r--r--package/kernel/mac80211/patches/brcm/304-v4.20-0002-brcmfmac-increase-buffer-for-obtaining-firmware-capa.patch28
-rw-r--r--package/kernel/mac80211/patches/brcm/305-v4.20-0001-brcmfmac-remove-set-but-not-used-variables-sfdoff-an.patch57
-rw-r--r--package/kernel/mac80211/patches/brcm/306-v4.20-0001-brcmfmac-reduce-timeout-for-action-frame-scan.patch67
-rw-r--r--package/kernel/mac80211/patches/brcm/306-v4.20-0002-brcmfmac-fix-full-timeout-waiting-for-action-frame-o.patch79
-rw-r--r--package/kernel/mac80211/patches/brcm/320-v5.0-0001-brcmfmac-Remove-firmware-loading-code-duplication.patch102
-rw-r--r--package/kernel/mac80211/patches/brcm/320-v5.0-0002-brcmfmac-Remove-recursion-from-firmware-load-error-h.patch127
-rw-r--r--package/kernel/mac80211/patches/brcm/320-v5.0-0003-brcmfmac-Add-support-for-first-trying-to-get-a-board.patch77
-rw-r--r--package/kernel/mac80211/patches/brcm/320-v5.0-0004-brcmfmac-Set-board_type-used-for-nvram-file-selectio.patch77
-rw-r--r--package/kernel/mac80211/patches/brcm/320-v5.0-0005-brcmfmac-Set-board_type-from-DMI-on-x86-based-machin.patch179
-rw-r--r--package/kernel/mac80211/patches/brcm/320-v5.0-0006-brcmfmac-Cleanup-brcmf_fw_request_done.patch41
-rw-r--r--package/kernel/mac80211/patches/brcm/321-v5.0-0001-brcmfmac-Add-support-for-getting-nvram-contents-from.patch132
-rw-r--r--package/kernel/mac80211/patches/brcm/321-v5.0-0002-brcmfmac-Fix-ccode-from-EFI-nvram-when-necessary.patch97
-rw-r--r--package/kernel/mac80211/patches/brcm/322-v5.0-0001-brcmfmac-fix-spelling-mistake-Retreiving-Retrieving.patch34
-rw-r--r--package/kernel/mac80211/patches/brcm/323-v5.0-0001-brcmutil-print-invalid-chanspec-when-WARN-ing.patch83
-rw-r--r--package/kernel/mac80211/patches/brcm/325-v5.0-brcmfmac-support-STA-info-struct-v7.patch80
-rw-r--r--package/kernel/mac80211/patches/brcm/326-v5.0-brcmfmac-Call-brcmf_dmi_probe-before-brcmf_of_probe.patch39
-rw-r--r--package/kernel/mac80211/patches/brcm/328-v5.0-0001-brcmfmac-add-credit-numbers-updating-support.patch95
-rw-r--r--package/kernel/mac80211/patches/brcm/328-v5.0-0002-brcmfmac-enable-frameburst-mode-in-default-firmware-.patch42
-rw-r--r--package/kernel/mac80211/patches/brcm/328-v5.0-0003-brcmfmac-handle-compressed-tx-status-signal.patch229
-rw-r--r--package/kernel/mac80211/patches/brcm/329-v5.0-0001-brcmfmac-add-4354-raw-pcie-device-id.patch36
-rw-r--r--package/kernel/mac80211/patches/brcm/329-v5.0-0002-brcmfmac-set-F2-watermark-to-256-for-4373.patch73
-rw-r--r--package/kernel/mac80211/patches/brcm/329-v5.0-0003-brcmfmac-set-SDIO-F1-MesBusyCtrl-for-CYW4373.patch55
-rw-r--r--package/kernel/mac80211/patches/brcm/329-v5.0-0004-brcmfmac-add-support-for-CYW43012-SDIO-chipset.patch253
-rw-r--r--package/kernel/mac80211/patches/brcm/329-v5.0-0005-brcmfmac-allow-GCI-core-enumuration.patch60
-rw-r--r--package/kernel/mac80211/patches/brcm/329-v5.0-0006-brcmfmac-update-43012-F2-watermark-setting-to-fix-DM.patch49
-rw-r--r--package/kernel/mac80211/patches/brcm/329-v5.0-0007-brcmfmac-4373-save-restore-support.patch57
-rw-r--r--package/kernel/mac80211/patches/brcm/329-v5.0-0008-brcmfmac-disable-command-decode-in-sdio_aos.patch45
-rw-r--r--package/kernel/mac80211/patches/brcm/330-v5.0-0001-brcmfmac-fix-false-positive-Wmaybe-unintialized-warn.patch34
-rw-r--r--package/kernel/mac80211/patches/brcm/332-v5.0-0001-brcmfmac-Fix-access-point-mode.patch41
-rw-r--r--package/kernel/mac80211/patches/brcm/340-v5.1-brcmfmac-Add-DMI-nvram-filename-quirk-for-PoV-TAB-P1.patch51
-rw-r--r--package/kernel/mac80211/patches/brcm/341-v5.1-brcmfmac-add-a-check-for-the-status-of-usb_register.patch28
-rw-r--r--package/kernel/mac80211/patches/brcm/342-v5.1-brcmfmac-fix-system-warning-message-during-wowl-susp.patch33
-rw-r--r--package/kernel/mac80211/patches/brcm/344-v5.1-brcmfmac-modify-__brcmf_err-to-take-bus-as-a-paramet.patch104
-rw-r--r--package/kernel/mac80211/patches/brcm/345-v5.1-brcmfmac-pass-bus-to-the-__brcmf_err-in-pcie.c.patch266
-rw-r--r--package/kernel/mac80211/patches/brcm/346-v5.1-brcmfmac-add-bphy_err-and-use-it-in-the-cfg80211.c.patch2025
-rw-r--r--package/kernel/mac80211/patches/brcm/347-v5.1-brcmfmac-fix-typos.patch62
-rw-r--r--package/kernel/mac80211/patches/brcm/348-v5.1-brcmfmac-support-monitor-frames-with-the-hardware-uc.patch143
-rw-r--r--package/kernel/mac80211/patches/brcm/349-v5.1-0001-brcmfmac-assure-SSID-length-from-firmware-is-limited.patch28
-rw-r--r--package/kernel/mac80211/patches/brcm/349-v5.1-0002-brcmfmac-add-subtype-check-for-event-handling-in-dat.patch96
-rw-r--r--package/kernel/mac80211/patches/brcm/349-v5.1-0003-brcmfmac-create-debugfs-files-for-bus-specific-layer.patch101
-rw-r--r--package/kernel/mac80211/patches/brcm/349-v5.1-0004-brcmfmac-disable-MBSS-feature-for-bcm4330-device.patch41
-rw-r--r--package/kernel/mac80211/patches/brcm/349-v5.1-0005-brcmfmac-check-and-dump-trap-info-during-sdio-probe.patch121
-rw-r--r--package/kernel/mac80211/patches/brcm/349-v5.1-0006-brcmfmac-use-chipname-in-brcmf_fw_alloc_request-for-.patch42
-rw-r--r--package/kernel/mac80211/patches/brcm/350-v5.1-brcmfmac-print-firmware-reported-ring-status-errors.patch67
-rw-r--r--package/kernel/mac80211/patches/brcm/351-v5.1-0001-brcmfmac-improve-code-handling-bandwidth-of-firmware.patch42
-rw-r--r--package/kernel/mac80211/patches/brcm/351-v5.1-0002-brcmfmac-support-firmware-reporting-160-MHz-channels.patch30
-rw-r--r--package/kernel/mac80211/patches/brcm/352-v5.1-brcmfmac-rework-bphy_err-to-take-struct-brcmf_pub-ar.patch2290
-rw-r--r--package/kernel/mac80211/patches/brcm/353-v5.1-brcmfmac-remove-set-but-not-used-variable-old_state.patch38
-rw-r--r--package/kernel/mac80211/patches/brcm/354-v5.1-brcmfmac-use-bphy_err-in-all-wiphy-related-code.patch1707
-rw-r--r--package/kernel/mac80211/patches/brcm/355-v5.1-brcmfmac-add-basic-validation-of-shared-RAM-address.patch38
-rw-r--r--package/kernel/mac80211/patches/brcm/356-v5.1-0001-brcmfmac-fix-size-of-the-struct-msgbuf_ring_status.patch29
-rw-r--r--package/kernel/mac80211/patches/brcm/356-v5.1-0002-brcmfmac-print-firmware-reported-general-status-erro.patch69
-rw-r--r--package/kernel/mac80211/patches/brcm/360-v5.2-0001-brcmfmac-support-repeated-brcmf_fw_alloc_request-cal.patch32
-rw-r--r--package/kernel/mac80211/patches/brcm/360-v5.2-0002-brcmfmac-add-a-function-designated-for-handling-firm.patch79
-rw-r--r--package/kernel/mac80211/patches/brcm/360-v5.2-0003-brcmfmac-reset-PCIe-bus-on-a-firmware-crash.patch153
-rw-r--r--package/kernel/mac80211/patches/brcm/361-v5.2-0001-brcmfmac-fix-WARNING-during-USB-disconnect-in-case-o.patch124
-rw-r--r--package/kernel/mac80211/patches/brcm/361-v5.2-0002-brcmfmac-fix-NULL-pointer-derefence-during-USB-disco.patch217
-rw-r--r--package/kernel/mac80211/patches/brcm/362-v5.2-0001-brcmfmac-fix-race-during-disconnect-when-USB-complet.patch84
-rw-r--r--package/kernel/mac80211/patches/brcm/362-v5.2-0002-brcmfmac-remove-pending-parameter-from-brcmf_usb_fre.patch54
-rw-r--r--package/kernel/mac80211/patches/brcm/362-v5.2-0003-brcmfmac-remove-unused-variable-i-from-brcmf_usb_fre.patch29
-rw-r--r--package/kernel/mac80211/patches/brcm/363-v5.2-brcmfmac-fix-Oops-when-bringing-up-interface-during-.patch123
-rw-r--r--package/kernel/mac80211/patches/brcm/364-v5.2-brcmfmac-convert-dev_init_lock-mutex-to-completion.patch182
-rw-r--r--package/kernel/mac80211/patches/brcm/365-v5.2-brcmfmac-fix-missing-checks-for-kmemdup.patch35
-rw-r--r--package/kernel/mac80211/patches/brcm/366-v5.2-brcmfmac-Use-struct_size-in-kzalloc.patch53
-rw-r--r--package/kernel/mac80211/patches/brcm/367-v5.2-brcmfmac-Loading-the-correct-firmware-for-brcm43456.patch35
-rw-r--r--package/kernel/mac80211/patches/brcm/368-v5.2-brcmfmac-fix-leak-of-mypkt-on-error-return-path.patch41
-rw-r--r--package/kernel/mac80211/patches/brcm/369-v5.2-brcmfmac-Add-DMI-nvram-filename-quirk-for-ACEPC-T8-a.patch70
-rw-r--r--package/kernel/mac80211/patches/brcm/370-v5.2-brcmfmac-send-mailbox-interrupt-twice-for-specific-h.patch32
-rw-r--r--package/kernel/mac80211/patches/brcm/371-v5.2-Revert-brcmfmac-send-mailbox-interrupt-twice-for-spe.patch30
-rw-r--r--package/kernel/mac80211/patches/brcm/372-v5.2-brcmfmac-send-mailbox-interrupt-twice-for-specific-h.patch39
-rw-r--r--package/kernel/mac80211/patches/brcm/373-v5.2-brcm80211-potential-NULL-dereference-in-brcmf_cfg802.patch50
-rw-r--r--package/kernel/mac80211/patches/brcm/374-v5.2-brcmfmac-set-txflow-request-id-from-1-to-pktids-arra.patch49
-rw-r--r--package/kernel/mac80211/patches/brcm/375-v5.2-brcmfmac-print-firmware-messages-after-a-firmware-cr.patch90
-rw-r--r--package/kernel/mac80211/patches/brcm/810-b43-gpio-mask-module-option.patch4
-rw-r--r--package/kernel/mac80211/patches/brcm/811-b43_no_pio.patch4
-rw-r--r--package/kernel/mac80211/patches/brcm/812-b43-add-antenna-control.patch18
-rw-r--r--package/kernel/mac80211/patches/brcm/814-b43-only-use-gpio-0-1-for-led.patch2
-rw-r--r--package/kernel/mac80211/patches/brcm/815-b43-always-take-overlapping-devs.patch2
-rw-r--r--package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch2
-rw-r--r--package/kernel/mac80211/patches/build/015-ipw200-mtu.patch4
-rw-r--r--package/kernel/mac80211/patches/build/050-lib80211_option.patch4
-rw-r--r--package/kernel/mac80211/patches/build/060-no_local_ssb_bcma.patch28
-rw-r--r--package/kernel/mac80211/patches/mwl/700-mwl8k-missing-pci-id-for-WNR854T.patch2
-rw-r--r--package/kernel/mac80211/patches/mwl/801-libertas-configure-sysfs-links.patch2
-rw-r--r--package/kernel/mac80211/patches/mwl/940-mwl8k_init_devices_synchronously.patch4
-rw-r--r--package/kernel/mac80211/patches/mwl/941-mwl8k-Fix-rate_idx-underflow.patch75
-rw-r--r--package/kernel/mac80211/patches/rt2x00/001-rt2x00-use-simple_read_from_buffer.patch59
-rw-r--r--package/kernel/mac80211/patches/rt2x00/002-rt2800-move-usb-specific-txdone-txstatus-routines-to.patch357
-rw-r--r--package/kernel/mac80211/patches/rt2x00/003-rt2800mmio-use-txdone-txstatus-routines-from-lib.patch244
-rw-r--r--package/kernel/mac80211/patches/rt2x00/004-rt2x00-do-not-check-for-txstatus-timeout-every-time-.patch72
-rw-r--r--package/kernel/mac80211/patches/rt2x00/005-rt2x00-use-different-txstatus-timeouts-when-flushing.patch112
-rw-r--r--package/kernel/mac80211/patches/rt2x00/006-rt2800-flush-and-txstatus-rework-for-rt2800mmio.patch238
-rw-r--r--package/kernel/mac80211/patches/rt2x00/007-rt2x00-rt2400pci-mark-expected-switch-fall-through.patch25
-rw-r--r--package/kernel/mac80211/patches/rt2x00/008-rt2x00-rt2500pci-mark-expected-switch-fall-through.patch25
-rw-r--r--package/kernel/mac80211/patches/rt2x00/009-rt2x00-rt2800lib-mark-expected-switch-fall-throughs.patch44
-rw-r--r--package/kernel/mac80211/patches/rt2x00/010-rt2x00-rt61pci-mark-expected-switch-fall-through.patch25
-rw-r--r--package/kernel/mac80211/patches/rt2x00/011-cross-tree-phase-out-dma_zalloc_coherent.patch40
-rw-r--r--package/kernel/mac80211/patches/rt2x00/012-rt2x00-reduce-tx-power-to-nominal-level-on-RT6352.patch32
-rw-r--r--package/kernel/mac80211/patches/rt2x00/013-rt2x00-Work-around-a-firmware-bug-with-shared-keys.patch143
-rw-r--r--package/kernel/mac80211/patches/rt2x00/014-rt2x00-no-need-to-check-return-value-of-debugfs_crea.patch107
-rw-r--r--package/kernel/mac80211/patches/rt2x00/015-rt2x00-remove-unneeded-check.patch137
-rw-r--r--package/kernel/mac80211/patches/rt2x00/016-rt2x00-remove-confusing-AGC-register.patch34
-rw-r--r--package/kernel/mac80211/patches/rt2x00/017-rt2800-enable-TX_PIN_CFG_LNA_PE_-bits-per-band.patch47
-rw-r--r--package/kernel/mac80211/patches/rt2x00/018-rt2800-enable-TX_PIN_CFG_RFRX_EN-only-for-MT7620.patch41
-rw-r--r--package/kernel/mac80211/patches/rt2x00/019-rt2800-comment-and-simplify-AGC-init-for-RT6352.patch33
-rw-r--r--package/kernel/mac80211/patches/rt2x00/020-cfg80211-add-ratelimited-variants-of-err-and-warn.patch39
-rw-r--r--package/kernel/mac80211/patches/rt2x00/021-rt2x00-use-ratelimited-variants-dev_warn-dev_err.patch42
-rw-r--r--package/kernel/mac80211/patches/rt2x00/022-rt2x00-check-number-of-EPROTO-errors.patch96
-rw-r--r--package/kernel/mac80211/patches/rt2x00/023-rt2x00-do-not-print-error-when-queue-is-full.patch43
-rw-r--r--package/kernel/mac80211/patches/rt2x00/024-rt2800-partially-restore-old-mmio-txstatus-behaviour.patch128
-rw-r--r--package/kernel/mac80211/patches/rt2x00/025-rt2800-new-flush-implementation-for-SoC-devices.patch27
-rw-r--r--package/kernel/mac80211/patches/rt2x00/026-rt2800-move-txstatus-pending-routine.patch106
-rw-r--r--package/kernel/mac80211/patches/rt2x00/027-rt2800mmio-fetch-tx-status-changes.patch61
-rw-r--r--package/kernel/mac80211/patches/rt2x00/028-rt2800mmio-use-timer-and-work-for-handling-tx-status.patch194
-rw-r--r--package/kernel/mac80211/patches/rt2x00/029-rt2x00-remove-last_nostatus_check.patch57
-rw-r--r--package/kernel/mac80211/patches/rt2x00/030-rt2x00-remove-not-used-entry-field.patch34
-rw-r--r--package/kernel/mac80211/patches/rt2x00/031-rt2x00mmio-remove-legacy-comment.patch26
-rw-r--r--package/kernel/mac80211/patches/rt2x00/032-rt2x00-do-not-increment-sequence-number-while-re-tra.patch94
-rw-r--r--package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch959
-rw-r--r--package/kernel/mac80211/patches/rt2x00/100-rt2x00_options.patch2
-rw-r--r--package/kernel/mac80211/patches/rt2x00/501-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch4
-rw-r--r--package/kernel/mac80211/patches/rt2x00/601-rt2x00-introduce-rt2x00_platform_h.patch2
-rw-r--r--package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch28
-rw-r--r--package/kernel/mac80211/patches/rt2x00/604-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch2
-rw-r--r--package/kernel/mac80211/patches/rt2x00/606-rt2x00-allow_disabling_bands_through_platform_data.patch4
-rw-r--r--package/kernel/mac80211/patches/rt2x00/607-rt2x00-add_platform_data_mac_addr.patch4
-rw-r--r--package/kernel/mac80211/patches/rt2x00/608-rt2x00-allow_disabling_bands_through_dts.patch2
-rw-r--r--package/kernel/mac80211/patches/rt2x00/609-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch2
-rw-r--r--package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch6
-rw-r--r--package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch2
-rw-r--r--package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch8
-rw-r--r--package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-rf-self-txdc-calibration.patch8
-rw-r--r--package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch8
-rw-r--r--package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-rxdcoc-calibration.patch8
-rw-r--r--package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-rxiq-calibration.patch8
-rw-r--r--package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch10
-rw-r--r--package/kernel/mac80211/patches/subsys/100-remove-cryptoapi-dependencies.patch49
-rw-r--r--package/kernel/mac80211/patches/subsys/110-mac80211_keep_keys_on_stop_ap.patch4
-rw-r--r--package/kernel/mac80211/patches/subsys/120-cfg80211_allow_perm_addr_change.patch2
-rw-r--r--package/kernel/mac80211/patches/subsys/130-disable-fils.patch4
-rw-r--r--package/kernel/mac80211/patches/subsys/131-Revert-mac80211-aes-cmac-switch-to-shash-CMAC-driver.patch6
-rw-r--r--package/kernel/mac80211/patches/subsys/132-mac80211-remove-cmac-dependency.patch2
-rw-r--r--package/kernel/mac80211/patches/subsys/140-tweak-TSQ-setting.patch2
-rw-r--r--package/kernel/mac80211/patches/subsys/150-disable_addr_notifier.patch10
-rw-r--r--package/kernel/mac80211/patches/subsys/210-ap_scan.patch2
-rw-r--r--package/kernel/mac80211/patches/subsys/300-mac80211-add-stop-start-logic-for-software-TXQs.patch272
-rw-r--r--package/kernel/mac80211/patches/subsys/301-mac80211-do-not-call-driver-wake_tx_queue-op-during-.patch33
-rw-r--r--package/kernel/mac80211/patches/subsys/303-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch82
-rw-r--r--package/kernel/mac80211/patches/subsys/304-mac80211-minstrel-remove-unnecessary-debugfs-cleanup.patch150
-rw-r--r--package/kernel/mac80211/patches/subsys/305-mac80211-minstrel-merge-with-minstrel_ht-always-enab.patch575
-rw-r--r--package/kernel/mac80211/patches/subsys/306-mac80211-minstrel-reduce-minstrel_mcs_groups-size.patch368
-rw-r--r--package/kernel/mac80211/patches/subsys/307-mac80211-minstrel-fix-using-short-preamble-CCK-rates.patch31
-rw-r--r--package/kernel/mac80211/patches/subsys/308-mac80211-minstrel-fix-CCK-rate-group-streams-value.patch20
-rw-r--r--package/kernel/mac80211/patches/subsys/309-mac80211-minstrel-fix-sampling-reporting-of-CCK-rate.patch58
-rw-r--r--package/kernel/mac80211/patches/subsys/310-mac80211-minstrel-do-not-sample-rates-3-times-slower.patch40
-rw-r--r--package/kernel/mac80211/patches/subsys/311-mac80211-fix-memory-accounting-with-A-MSDU-aggregati.patch58
-rw-r--r--package/kernel/mac80211/patches/subsys/312-mac80211-minstrel_ht-add-flag-to-indicate-missing-in.patch122
-rw-r--r--package/kernel/mac80211/patches/subsys/313-mac80211-fix-unaligned-access-in-mesh-table-hash-fun.patch21
-rw-r--r--package/kernel/mac80211/patches/subsys/320-mac80211-Add-TXQ-scheduling-API.patch292
-rw-r--r--package/kernel/mac80211/patches/subsys/321-cfg80211-Add-airtime-statistics-and-settings.patch202
-rw-r--r--package/kernel/mac80211/patches/subsys/322-mac80211-Add-airtime-accounting-and-scheduling-to-TX.patch522
-rw-r--r--package/kernel/mac80211/patches/subsys/323-mac80211-Expose-ieee80211_schedule_txq-function.patch73
-rw-r--r--package/kernel/mac80211/patches/subsys/350-mac80211-add-hdrlen-to-ieee80211_tx_data.patch44
-rw-r--r--package/kernel/mac80211/patches/subsys/351-mac80211-add-TX_NEEDS_ALIGNED4_SKBS-hw-flag.patch60
-rw-r--r--package/kernel/mac80211/patches/subsys/352-mac80211-rework-locking-for-txq-scheduling-airtime-f.patch214
-rw-r--r--package/kernel/mac80211/patches/subsys/353-mac80211-mesh-drop-redundant-rcu_read_lock-unlock-ca.patch96
-rw-r--r--package/kernel/mac80211/patches/subsys/354-mac80211-calculate-hash-for-fq-without-holding-fq-lo.patch124
-rw-r--r--package/kernel/mac80211/patches/subsys/355-mac80211-run-late-dequeue-late-tx-handlers-without-h.patch55
-rw-r--r--package/kernel/mac80211/patches/subsys/356-mac80211-set-NETIF_F_LLTX-when-using-intermediate-tx.patch22
-rw-r--r--package/kernel/mac80211/patches/subsys/357-mac80211-optimize-skb-resizing.patch18
-rw-r--r--package/kernel/mac80211/patches/subsys/358-mac80211-make-ieee80211_schedule_txq-schedule-empty-.patch105
-rw-r--r--package/kernel/mac80211/patches/subsys/359-mac80211-un-schedule-TXQs-on-powersave-start.patch31
-rw-r--r--package/kernel/mac80211/patches/subsys/360-mac80211-when-using-iTXQ-select-the-queue-in-ieee802.patch183
-rw-r--r--package/kernel/mac80211/patches/subsys/361-mac80211-minstrel_ht-add-support-for-rates-with-4-sp.patch78
-rw-r--r--package/kernel/mac80211/patches/subsys/362-mac80211-minstrel_ht-automatically-calculate-rate-du.patch189
-rw-r--r--package/kernel/mac80211/patches/subsys/390-nl-mac-80211-allow-4addr-AP-operation-on-crypto-cont.patch103
-rw-r--r--package/kernel/mac80211/patches/subsys/522-mac80211_configure_antenna_gain.patch40
-rw-r--r--package/network/utils/iw/patches/001-nl80211_h_sync.patch246
-rw-r--r--target/linux/generic/backport-4.9/041-mm-rename-__alloc_page_frag-to-page_frag_alloc-and-_.patch137
-rw-r--r--target/linux/generic/backport-4.9/042-mm-rename-__page_frag-functions-to-__page_frag_cache.patch79
-rw-r--r--target/linux/generic/pending-4.9/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch2
225 files changed, 570 insertions, 20486 deletions
diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile
index 20258fd662..3ae39888e1 100644
--- a/package/kernel/mac80211/Makefile
+++ b/package/kernel/mac80211/Makefile
@@ -10,10 +10,10 @@ include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=mac80211
-PKG_VERSION:=4.19.32-1
-PKG_RELEASE:=2
-PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v4.19.32/
-PKG_HASH:=838db1565b54fe4bd1e769c54f30c65c9ea2fb5e99a0cddb7910561794ae317a
+PKG_VERSION:=5.2-rc7-1
+PKG_RELEASE:=1
+PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.2-rc7/
+PKG_HASH:=3179a4ec398bd6366a4fd8a44b311a57f8da87ad10720baf7c17aef9c8ec2983
PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)
diff --git a/package/kernel/mac80211/broadcom.mk b/package/kernel/mac80211/broadcom.mk
index eaf736e07c..f55f38d55e 100644
--- a/package/kernel/mac80211/broadcom.mk
+++ b/package/kernel/mac80211/broadcom.mk
@@ -105,7 +105,7 @@ define KernelPackage/b43
CONFIG_HW_RANDOM=y
# Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb
DEPENDS += \
- @PCI_SUPPORT +kmod-mac80211 \
+ @PCI_SUPPORT +kmod-mac80211 +kmod-lib-cordic \
$(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
$(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko
diff --git a/package/kernel/mac80211/patches/ath/070-ath_common_config.patch b/package/kernel/mac80211/patches/ath/070-ath_common_config.patch
index 41774fe53e..cc84c1b5de 100644
--- a/package/kernel/mac80211/patches/ath/070-ath_common_config.patch
+++ b/package/kernel/mac80211/patches/ath/070-ath_common_config.patch
@@ -1,6 +1,7 @@
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
-@@ -1,5 +1,5 @@
+@@ -1,6 +1,6 @@
+ # SPDX-License-Identifier: GPL-2.0-only
config ATH_COMMON
- tristate
+ tristate "ath.ko"
diff --git a/package/kernel/mac80211/patches/ath/080-ath10k_thermal_config.patch b/package/kernel/mac80211/patches/ath/080-ath10k_thermal_config.patch
index a86cbc6e54..cef57f09c9 100644
--- a/package/kernel/mac80211/patches/ath/080-ath10k_thermal_config.patch
+++ b/package/kernel/mac80211/patches/ath/080-ath10k_thermal_config.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
-@@ -85,6 +85,12 @@ config ATH10K_TRACING
+@@ -87,6 +87,12 @@ config ATH10K_TRACING
---help---
Select this to ath10k use tracing infrastructure.
@@ -26,7 +26,7 @@
ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o
--- a/drivers/net/wireless/ath/ath10k/thermal.h
+++ b/drivers/net/wireless/ath/ath10k/thermal.h
-@@ -36,7 +36,7 @@ struct ath10k_thermal {
+@@ -25,7 +25,7 @@ struct ath10k_thermal {
int temperature;
};
diff --git a/package/kernel/mac80211/patches/ath/356-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch b/package/kernel/mac80211/patches/ath/356-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch
index 3adcb8b796..38b5c51302 100644
--- a/package/kernel/mac80211/patches/ath/356-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch
+++ b/package/kernel/mac80211/patches/ath/356-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch
@@ -8,7 +8,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -2962,7 +2962,8 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2963,7 +2963,8 @@ void ath9k_hw_apply_txpower(struct ath_h
{
struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
struct ieee80211_channel *channel;
@@ -18,7 +18,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
u16 ctl = NO_CTL;
if (!chan)
-@@ -2974,9 +2975,14 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2975,9 +2976,14 @@ void ath9k_hw_apply_txpower(struct ath_h
channel = chan->chan;
chan_pwr = min_t(int, channel->max_power * 2, MAX_RATE_POWER);
new_pwr = min_t(int, chan_pwr, reg->power_limit);
diff --git a/package/kernel/mac80211/patches/ath/365-ath9k-adjust-tx-power-reduction-for-US-regulatory-do.patch b/package/kernel/mac80211/patches/ath/365-ath9k-adjust-tx-power-reduction-for-US-regulatory-do.patch
index 363e9aa9a3..4b458f74ab 100644
--- a/package/kernel/mac80211/patches/ath/365-ath9k-adjust-tx-power-reduction-for-US-regulatory-do.patch
+++ b/package/kernel/mac80211/patches/ath/365-ath9k-adjust-tx-power-reduction-for-US-regulatory-do.patch
@@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -2981,6 +2981,10 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2982,6 +2982,10 @@ void ath9k_hw_apply_txpower(struct ath_h
if (ant_gain > max_gain)
ant_reduction = ant_gain - max_gain;
diff --git a/package/kernel/mac80211/patches/ath/381-ath9k-fix-tx99-with-monitor-mode-interface.patch b/package/kernel/mac80211/patches/ath/381-ath9k-fix-tx99-with-monitor-mode-interface.patch
deleted file mode 100644
index d5c37825fd..0000000000
--- a/package/kernel/mac80211/patches/ath/381-ath9k-fix-tx99-with-monitor-mode-interface.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 20 Aug 2018 11:35:05 +0200
-Subject: [PATCH] ath9k: fix tx99 with monitor mode interface
-
-Tx99 is typically configured via a monitor mode interface, which does
-not get added to the driver as a vif. Since the code currently expects
-a configured virtual interface for tx99, enabling tx99 via debugfs fails.
-Since the vif is not needed anyway, remove all checks for it.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -1074,7 +1074,6 @@ struct ath_softc {
-
- struct ath_spec_scan_priv spec_priv;
-
-- struct ieee80211_vif *tx99_vif;
- struct sk_buff *tx99_skb;
- bool tx99_state;
- s16 tx99_power;
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1251,15 +1251,10 @@ static int ath9k_add_interface(struct ie
- struct ath_vif *avp = (void *)vif->drv_priv;
- struct ath_node *an = &avp->mcast_node;
-
-- mutex_lock(&sc->mutex);
-+ if (IS_ENABLED(CPTCFG_ATH9K_TX99))
-+ return -EOPNOTSUPP;
-
-- if (IS_ENABLED(CPTCFG_ATH9K_TX99)) {
-- if (sc->cur_chan->nvifs >= 1) {
-- mutex_unlock(&sc->mutex);
-- return -EOPNOTSUPP;
-- }
-- sc->tx99_vif = vif;
-- }
-+ mutex_lock(&sc->mutex);
-
- ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
- sc->cur_chan->nvifs++;
-@@ -1342,7 +1337,6 @@ static void ath9k_remove_interface(struc
- ath9k_p2p_remove_vif(sc, vif);
-
- sc->cur_chan->nvifs--;
-- sc->tx99_vif = NULL;
- if (!ath9k_is_chanctx_enabled())
- list_del(&avp->list);
-
---- a/drivers/net/wireless/ath/ath9k/tx99.c
-+++ b/drivers/net/wireless/ath/ath9k/tx99.c
-@@ -54,12 +54,6 @@ static struct sk_buff *ath9k_build_tx99_
- struct ieee80211_hdr *hdr;
- struct ieee80211_tx_info *tx_info;
- struct sk_buff *skb;
-- struct ath_vif *avp;
--
-- if (!sc->tx99_vif)
-- return NULL;
--
-- avp = (struct ath_vif *)sc->tx99_vif->drv_priv;
-
- skb = alloc_skb(len, GFP_KERNEL);
- if (!skb)
-@@ -77,14 +71,11 @@ static struct sk_buff *ath9k_build_tx99_
- memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
- memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
-
-- hdr->seq_ctrl |= cpu_to_le16(avp->seq_no);
--
- tx_info = IEEE80211_SKB_CB(skb);
- memset(tx_info, 0, sizeof(*tx_info));
- rate = &tx_info->control.rates[0];
- tx_info->band = sc->cur_chan->chandef.chan->band;
- tx_info->flags = IEEE80211_TX_CTL_NO_ACK;
-- tx_info->control.vif = sc->tx99_vif;
- rate->count = 1;
- if (ah->curchan && IS_CHAN_HT(ah->curchan)) {
- rate->flags |= IEEE80211_TX_RC_MCS;
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -2974,7 +2974,7 @@ int ath9k_tx99_send(struct ath_softc *sc
- return -EINVAL;
- }
-
-- ath_set_rates(sc->tx99_vif, NULL, bf);
-+ ath_set_rates(NULL, NULL, bf);
-
- ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
- ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
diff --git a/package/kernel/mac80211/patches/ath/395-ath9k-add-back-support-for-using-active-monitor-inte.patch b/package/kernel/mac80211/patches/ath/395-ath9k-add-back-support-for-using-active-monitor-inte.patch
deleted file mode 100644
index 7f30de9862..0000000000
--- a/package/kernel/mac80211/patches/ath/395-ath9k-add-back-support-for-using-active-monitor-inte.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 22 Sep 2018 15:20:50 +0200
-Subject: [PATCH] ath9k: add back support for using active monitor interfaces
- for tx99
-
-Various documented examples on how to set up tx99 with ath9k rely
-on setting up a regular monitor interface for setting the channel.
-My previous patch "ath9k: fix tx99 with monitor mode interface" made
-it possible to set it up this way again. However, it was removing support
-for using an active monitor interface, which is required for controlling
-the bitrate as well, since the bitrate is not passed down with a regular
-monitor interface.
-
-This patch partially reverts the previous one, but keeps support for using
-a regular monitor interface to keep documented steps working in cases
-where the bitrate does not matter
-
-Fixes: d9c52fd17cb48 ("ath9k: fix tx99 with monitor mode interface")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -1074,6 +1074,7 @@ struct ath_softc {
-
- struct ath_spec_scan_priv spec_priv;
-
-+ struct ieee80211_vif *tx99_vif;
- struct sk_buff *tx99_skb;
- bool tx99_state;
- s16 tx99_power;
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1251,8 +1251,13 @@ static int ath9k_add_interface(struct ie
- struct ath_vif *avp = (void *)vif->drv_priv;
- struct ath_node *an = &avp->mcast_node;
-
-- if (IS_ENABLED(CPTCFG_ATH9K_TX99))
-- return -EOPNOTSUPP;
-+ if (IS_ENABLED(CPTCFG_ATH9K_TX99)) {
-+ if (sc->cur_chan->nvifs >= 1) {
-+ mutex_unlock(&sc->mutex);
-+ return -EOPNOTSUPP;
-+ }
-+ sc->tx99_vif = vif;
-+ }
-
- mutex_lock(&sc->mutex);
-
-@@ -1337,6 +1342,7 @@ static void ath9k_remove_interface(struc
- ath9k_p2p_remove_vif(sc, vif);
-
- sc->cur_chan->nvifs--;
-+ sc->tx99_vif = NULL;
- if (!ath9k_is_chanctx_enabled())
- list_del(&avp->list);
-
---- a/drivers/net/wireless/ath/ath9k/tx99.c
-+++ b/drivers/net/wireless/ath/ath9k/tx99.c
-@@ -54,6 +54,7 @@ static struct sk_buff *ath9k_build_tx99_
- struct ieee80211_hdr *hdr;
- struct ieee80211_tx_info *tx_info;
- struct sk_buff *skb;
-+ struct ath_vif *avp;
-
- skb = alloc_skb(len, GFP_KERNEL);
- if (!skb)
-@@ -71,11 +72,17 @@ static struct sk_buff *ath9k_build_tx99_
- memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
- memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
-
-+ if (sc->tx99_vif) {
-+ avp = (struct ath_vif *) sc->tx99_vif->drv_priv;
-+ hdr->seq_ctrl |= cpu_to_le16(avp->seq_no);
-+ }
-+
- tx_info = IEEE80211_SKB_CB(skb);
- memset(tx_info, 0, sizeof(*tx_info));
- rate = &tx_info->control.rates[0];
- tx_info->band = sc->cur_chan->chandef.chan->band;
- tx_info->flags = IEEE80211_TX_CTL_NO_ACK;
-+ tx_info->control.vif = sc->tx99_vif;
- rate->count = 1;
- if (ah->curchan && IS_CHAN_HT(ah->curchan)) {
- rate->flags |= IEEE80211_TX_RC_MCS;
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -2974,7 +2974,7 @@ int ath9k_tx99_send(struct ath_softc *sc
- return -EINVAL;
- }
-
-- ath_set_rates(NULL, NULL, bf);
-+ ath_set_rates(sc->tx99_vif, NULL, bf);
-
- ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
- ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
diff --git a/package/kernel/mac80211/patches/ath/402-ath_regd_optional.patch b/package/kernel/mac80211/patches/ath/402-ath_regd_optional.patch
index 03c12df1a8..cae3c5c0dd 100644
--- a/package/kernel/mac80211/patches/ath/402-ath_regd_optional.patch
+++ b/package/kernel/mac80211/patches/ath/402-ath_regd_optional.patch
@@ -70,7 +70,7 @@
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
-@@ -23,6 +23,9 @@ config WLAN_VENDOR_ATH
+@@ -24,6 +24,9 @@ config WLAN_VENDOR_ATH
if WLAN_VENDOR_ATH
diff --git a/package/kernel/mac80211/patches/ath/404-regd_no_assoc_hints.patch b/package/kernel/mac80211/patches/ath/404-regd_no_assoc_hints.patch
index ec95206acb..e4d1a6daab 100644
--- a/package/kernel/mac80211/patches/ath/404-regd_no_assoc_hints.patch
+++ b/package/kernel/mac80211/patches/ath/404-regd_no_assoc_hints.patch
@@ -1,6 +1,6 @@
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
-@@ -2982,6 +2982,8 @@ void regulatory_hint_country_ie(struct w
+@@ -3032,6 +3032,8 @@ void regulatory_hint_country_ie(struct w
enum environment_cap env = ENVIRON_ANY;
struct regulatory_request *request = NULL, *lr;
@@ -9,11 +9,11 @@
/* IE len must be evenly divisible by 2 */
if (country_ie_len & 0x01)
return;
-@@ -3188,6 +3190,7 @@ static void restore_regulatory_settings(
+@@ -3283,6 +3285,7 @@ static bool is_wiphy_all_set_reg_flag(en
void regulatory_hint_disconnect(void)
{
+ return;
- pr_debug("All devices are disconnected, going to restore regulatory settings\n");
- restore_regulatory_settings(false);
- }
+ /* Restore of regulatory settings is not required when wiphy(s)
+ * ignore IE from connected access point but clearance of beacon hints
+ * is required when wiphy(s) supports beacon hints.
diff --git a/package/kernel/mac80211/patches/ath/405-ath_regd_us.patch b/package/kernel/mac80211/patches/ath/405-ath_regd_us.patch
index 8cb7f00ff9..088833199d 100644
--- a/package/kernel/mac80211/patches/ath/405-ath_regd_us.patch
+++ b/package/kernel/mac80211/patches/ath/405-ath_regd_us.patch
@@ -21,6 +21,6 @@
{CTRY_UNITED_KINGDOM, ETSI1_WORLD, "GB"},
{CTRY_UNITED_STATES, FCC3_FCCA, "US"},
+ {CTRY_UNITED_STATES, FCC3_FCCA_2, "US"},
+ {CTRY_UNITED_STATES2, FCC3_FCCA, "US"},
+ {CTRY_UNITED_STATES3, FCC3_FCCA, "US"},
/* This "PS" is for US public safety actually... to support this we
- * would need to assign new special alpha2 to CRDA db as with the world
- * regdomain and use another alpha2 */
diff --git a/package/kernel/mac80211/patches/ath/407-regd_add_extra_country_codes.patch b/package/kernel/mac80211/patches/ath/407-regd_add_extra_country_codes.patch
deleted file mode 100644
index 8f621002fe..0000000000
--- a/package/kernel/mac80211/patches/ath/407-regd_add_extra_country_codes.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Oever Gonzalez <notengobattery@gmail.com>
-Date: Mon, 7 Jan 2019 01:07:12 +0200
-Subject: [PATCH] ath: regd: add extra coutry codes
-
-This patch adds several country codes to the regd.h and regd_common.h
-files in order to support devices whose country codes are not present in
-the original list. Without this patch, all devices whose manufacturer
-programmed any of these code in their EEPROM will not work.
-
-Signed-off-by: Oever Gonzalez <notengobattery@gmail.com>
----
-
---- a/drivers/net/wireless/ath/regd.h
-+++ b/drivers/net/wireless/ath/regd.h
-@@ -185,7 +185,9 @@ enum CountryCode {
- CTRY_UKRAINE = 804,
- CTRY_UNITED_KINGDOM = 826,
- CTRY_UNITED_STATES = 840,
-+ CTRY_UNITED_STATES2 = 841,
- CTRY_UNITED_STATES_FCC49 = 842,
-+ CTRY_UNITED_STATES3 = 843,
- CTRY_URUGUAY = 858,
- CTRY_UZBEKISTAN = 860,
- CTRY_VENEZUELA = 862,
---- a/drivers/net/wireless/ath/regd_common.h
-+++ b/drivers/net/wireless/ath/regd_common.h
-@@ -486,6 +486,8 @@ static struct country_code_to_enum_rd al
- {CTRY_UNITED_KINGDOM, ETSI1_WORLD, "GB"},
- {CTRY_UNITED_STATES, FCC3_FCCA, "US"},
- {CTRY_UNITED_STATES, FCC3_FCCA_2, "US"},
-+ {CTRY_UNITED_STATES2, FCC3_FCCA, "US"},
-+ {CTRY_UNITED_STATES3, FCC3_FCCA, "US"},
- /* This "PS" is for US public safety actually... to support this we
- * would need to assign new special alpha2 to CRDA db as with the world
- * regdomain and use another alpha2 */
diff --git a/package/kernel/mac80211/patches/ath/410-ath9k_allow_adhoc_and_ap.patch b/package/kernel/mac80211/patches/ath/410-ath9k_allow_adhoc_and_ap.patch
index 25c236b12c..bdf784968f 100644
--- a/package/kernel/mac80211/patches/ath/410-ath9k_allow_adhoc_and_ap.patch
+++ b/package/kernel/mac80211/patches/ath/410-ath9k_allow_adhoc_and_ap.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -833,6 +833,7 @@ static const struct ieee80211_iface_limi
+@@ -831,6 +831,7 @@ static const struct ieee80211_iface_limi
BIT(NL80211_IFTYPE_AP) },
{ .max = 1, .types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO) },
diff --git a/package/kernel/mac80211/patches/ath/411-ath5k_allow_adhoc_and_ap.patch b/package/kernel/mac80211/patches/ath/411-ath5k_allow_adhoc_and_ap.patch
index 2a5ab3d428..9dbe047c9a 100644
--- a/package/kernel/mac80211/patches/ath/411-ath5k_allow_adhoc_and_ap.patch
+++ b/package/kernel/mac80211/patches/ath/411-ath5k_allow_adhoc_and_ap.patch
@@ -18,7 +18,7 @@
goto end;
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
-@@ -1965,7 +1965,7 @@ ath5k_beacon_send(struct ath5k_hw *ah)
+@@ -1964,7 +1964,7 @@ ath5k_beacon_send(struct ath5k_hw *ah)
}
if ((ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs +
@@ -27,7 +27,7 @@
ah->opmode == NL80211_IFTYPE_MESH_POINT) {
u64 tsf = ath5k_hw_get_tsf64(ah);
u32 tsftu = TSF_TO_TU(tsf);
-@@ -2051,7 +2051,7 @@ ath5k_beacon_update_timers(struct ath5k_
+@@ -2050,7 +2050,7 @@ ath5k_beacon_update_timers(struct ath5k_
intval = ah->bintval & AR5K_BEACON_PERIOD;
if (ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs
@@ -36,7 +36,7 @@
intval /= ATH_BCBUF; /* staggered multi-bss beacons */
if (intval < 15)
ATH5K_WARN(ah, "intval %u is too low, min 15\n",
-@@ -2518,6 +2518,7 @@ static const struct ieee80211_iface_limi
+@@ -2516,6 +2516,7 @@ static const struct ieee80211_iface_limi
BIT(NL80211_IFTYPE_MESH_POINT) |
#endif
BIT(NL80211_IFTYPE_AP) },
diff --git a/package/kernel/mac80211/patches/ath/500-ath9k_eeprom_debugfs.patch b/package/kernel/mac80211/patches/ath/500-ath9k_eeprom_debugfs.patch
index b6dc45cd96..786a3ed3fb 100644
--- a/package/kernel/mac80211/patches/ath/500-ath9k_eeprom_debugfs.patch
+++ b/package/kernel/mac80211/patches/ath/500-ath9k_eeprom_debugfs.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1374,6 +1374,53 @@ void ath9k_deinit_debug(struct ath_softc
+@@ -1361,6 +1361,53 @@ void ath9k_deinit_debug(struct ath_softc
ath9k_cmn_spectral_deinit_debug(&sc->spec_priv);
}
@@ -54,7 +54,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1393,6 +1440,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1380,6 +1427,8 @@ int ath9k_init_debug(struct ath_hw *ah)
ath9k_tx99_init_debug(sc);
ath9k_cmn_spectral_init_debug(&sc->spec_priv, sc->debug.debugfs_phy);
diff --git a/package/kernel/mac80211/patches/ath/501-ath9k_ahb_init.patch b/package/kernel/mac80211/patches/ath/501-ath9k_ahb_init.patch
index 5fc60dd0ae..b9c784eb25 100644
--- a/package/kernel/mac80211/patches/ath/501-ath9k_ahb_init.patch
+++ b/package/kernel/mac80211/patches/ath/501-ath9k_ahb_init.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -1144,25 +1144,25 @@ static int __init ath9k_init(void)
+@@ -1143,25 +1143,25 @@ static int __init ath9k_init(void)
{
int error;
diff --git a/package/kernel/mac80211/patches/ath/512-ath9k_channelbw_debugfs.patch b/package/kernel/mac80211/patches/ath/512-ath9k_channelbw_debugfs.patch
index 2d4a5688c8..80e33182f7 100644
--- a/package/kernel/mac80211/patches/ath/512-ath9k_channelbw_debugfs.patch
+++ b/package/kernel/mac80211/patches/ath/512-ath9k_channelbw_debugfs.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1421,6 +1421,52 @@ static const struct file_operations fops
+@@ -1408,6 +1408,52 @@ static const struct file_operations fops
.owner = THIS_MODULE
};
@@ -53,7 +53,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1442,6 +1488,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1429,6 +1475,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_eeprom);
diff --git a/package/kernel/mac80211/patches/ath/530-ath9k_extra_leds.patch b/package/kernel/mac80211/patches/ath/530-ath9k_extra_leds.patch
index c13a72cbb0..1f19483064 100644
--- a/package/kernel/mac80211/patches/ath/530-ath9k_extra_leds.patch
+++ b/package/kernel/mac80211/patches/ath/530-ath9k_extra_leds.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -850,6 +850,9 @@ static inline int ath9k_dump_btcoex(stru
+@@ -843,6 +843,9 @@ static inline int ath9k_dump_btcoex(stru
#ifdef CPTCFG_MAC80211_LEDS
void ath_init_leds(struct ath_softc *sc);
void ath_deinit_leds(struct ath_softc *sc);
@@ -10,9 +10,9 @@
#else
static inline void ath_init_leds(struct ath_softc *sc)
{
-@@ -991,6 +994,13 @@ void ath_ant_comb_scan(struct ath_softc
- #define AIRTIME_USE_NEW_QUEUES BIT(2)
- #define AIRTIME_ACTIVE(flags) (!!(flags & (AIRTIME_USE_TX|AIRTIME_USE_RX)))
+@@ -979,6 +982,13 @@ void ath_ant_comb_scan(struct ath_softc
+
+ #define ATH9K_NUM_CHANCTX 2 /* supports 2 operating channels */
+struct ath_led {
+ struct list_head list;
@@ -24,7 +24,7 @@
struct ath_softc {
struct ieee80211_hw *hw;
struct device *dev;
-@@ -1046,9 +1056,8 @@ struct ath_softc {
+@@ -1032,9 +1042,8 @@ struct ath_softc {
spinlock_t chan_lock;
#ifdef CPTCFG_MAC80211_LEDS
@@ -181,7 +181,7 @@
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -1056,7 +1056,7 @@ int ath9k_init_device(u16 devid, struct
+@@ -1055,7 +1055,7 @@ int ath9k_init_device(u16 devid, struct
#ifdef CPTCFG_MAC80211_LEDS
/* must be initialized before ieee80211_register_hw */
@@ -192,7 +192,7 @@
#endif
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1466,6 +1466,61 @@ static const struct file_operations fops
+@@ -1453,6 +1453,61 @@ static const struct file_operations fops
.llseek = default_llseek,
};
@@ -254,7 +254,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
-@@ -1490,6 +1545,10 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1477,6 +1532,10 @@ int ath9k_init_debug(struct ath_hw *ah)
&fops_eeprom);
debugfs_create_file("chanbw", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
sc, &fops_chanbw);
diff --git a/package/kernel/mac80211/patches/ath/542-ath9k_debugfs_diag.patch b/package/kernel/mac80211/patches/ath/542-ath9k_debugfs_diag.patch
index 55896c834b..e9ba4a9483 100644
--- a/package/kernel/mac80211/patches/ath/542-ath9k_debugfs_diag.patch
+++ b/package/kernel/mac80211/patches/ath/542-ath9k_debugfs_diag.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1522,6 +1522,50 @@ static const struct file_operations fops
+@@ -1509,6 +1509,50 @@ static const struct file_operations fops
#endif
@@ -51,7 +51,7 @@
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
-@@ -1549,6 +1593,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1536,6 +1580,8 @@ int ath9k_init_debug(struct ath_hw *ah)
debugfs_create_file("gpio_led", S_IWUSR,
sc->debug.debugfs_phy, sc, &fops_gpio_led);
#endif
diff --git a/package/kernel/mac80211/patches/ath/543-ath9k_entropy_from_adc.patch b/package/kernel/mac80211/patches/ath/543-ath9k_entropy_from_adc.patch
index b0a027564a..2e44b0095f 100644
--- a/package/kernel/mac80211/patches/ath/543-ath9k_entropy_from_adc.patch
+++ b/package/kernel/mac80211/patches/ath/543-ath9k_entropy_from_adc.patch
@@ -55,7 +55,7 @@
ops->spectral_scan_config = ar9003_hw_spectral_scan_config;
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -821,7 +821,8 @@ static void ath9k_init_txpower_limits(st
+@@ -819,7 +819,8 @@ static void ath9k_init_txpower_limits(st
if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
ath9k_init_band_txpower(sc, NL80211_BAND_5GHZ);
@@ -65,8 +65,8 @@
}
static const struct ieee80211_iface_limit if_limits[] = {
-@@ -1016,6 +1017,18 @@ static void ath9k_set_hw_capab(struct at
- wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+@@ -1015,6 +1016,18 @@ static void ath9k_set_hw_capab(struct at
+ wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_AIRTIME_FAIRNESS);
}
+static void ath_get_initial_entropy(struct ath_softc *sc)
@@ -84,7 +84,7 @@
int ath9k_init_device(u16 devid, struct ath_softc *sc,
const struct ath_bus_ops *bus_ops)
{
-@@ -1061,6 +1074,8 @@ int ath9k_init_device(u16 devid, struct
+@@ -1060,6 +1073,8 @@ int ath9k_init_device(u16 devid, struct
ARRAY_SIZE(ath9k_tpt_blink));
#endif
@@ -110,7 +110,7 @@
static inline void ath9k_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable)
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -1324,9 +1324,30 @@ void ar5008_hw_init_rate_txpower(struct
+@@ -1320,9 +1320,30 @@ void ar5008_hw_init_rate_txpower(struct
}
}
@@ -141,7 +141,7 @@
static const u32 ar5416_cca_regs[6] = {
AR_PHY_CCA,
AR_PHY_CH1_CCA,
-@@ -1341,6 +1362,8 @@ int ar5008_hw_attach_phy_ops(struct ath_
+@@ -1337,6 +1358,8 @@ int ar5008_hw_attach_phy_ops(struct ath_
if (ret)
return ret;
diff --git a/package/kernel/mac80211/patches/ath/545-ath9k_ani_ws_detect.patch b/package/kernel/mac80211/patches/ath/545-ath9k_ani_ws_detect.patch
index 3a3f244b9d..70db82a21e 100644
--- a/package/kernel/mac80211/patches/ath/545-ath9k_ani_ws_detect.patch
+++ b/package/kernel/mac80211/patches/ath/545-ath9k_ani_ws_detect.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -953,55 +953,6 @@ static bool ar5008_hw_ani_control_new(st
+@@ -949,55 +949,6 @@ static bool ar5008_hw_ani_control_new(st
* on == 0 means more noise imm
*/
u32 on = param ? 1 : 0;
diff --git a/package/kernel/mac80211/patches/ath/548-ath9k_enable_gpio_chip.patch b/package/kernel/mac80211/patches/ath/548-ath9k_enable_gpio_chip.patch
index eb9eb26a74..78206d2860 100644
--- a/package/kernel/mac80211/patches/ath/548-ath9k_enable_gpio_chip.patch
+++ b/package/kernel/mac80211/patches/ath/548-ath9k_enable_gpio_chip.patch
@@ -18,7 +18,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
#include "common.h"
#include "debug.h"
-@@ -1001,6 +1002,14 @@ struct ath_led {
+@@ -989,6 +990,14 @@ struct ath_led {
struct led_classdev cdev;
};
@@ -33,7 +33,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
struct ath_softc {
struct ieee80211_hw *hw;
struct device *dev;
-@@ -1058,6 +1067,9 @@ struct ath_softc {
+@@ -1044,6 +1053,9 @@ struct ath_softc {
#ifdef CPTCFG_MAC80211_LEDS
const char *led_default_trigger;
struct list_head leds;
diff --git a/package/kernel/mac80211/patches/ath/549-ath9k_enable_gpio_buttons.patch b/package/kernel/mac80211/patches/ath/549-ath9k_enable_gpio_buttons.patch
index bd71b75e76..716e09f351 100644
--- a/package/kernel/mac80211/patches/ath/549-ath9k_enable_gpio_buttons.patch
+++ b/package/kernel/mac80211/patches/ath/549-ath9k_enable_gpio_buttons.patch
@@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -1069,6 +1069,7 @@ struct ath_softc {
+@@ -1055,6 +1055,7 @@ struct ath_softc {
struct list_head leds;
#ifdef CONFIG_GPIOLIB
struct ath9k_gpio_chip *gpiochip;
diff --git a/package/kernel/mac80211/patches/ath/551-ath9k_ubnt_uap_plus_hsr.patch b/package/kernel/mac80211/patches/ath/551-ath9k_ubnt_uap_plus_hsr.patch
index 30eba27137..c28054d58d 100644
--- a/package/kernel/mac80211/patches/ath/551-ath9k_ubnt_uap_plus_hsr.patch
+++ b/package/kernel/mac80211/patches/ath/551-ath9k_ubnt_uap_plus_hsr.patch
@@ -396,7 +396,7 @@
ATH9K_HWRNG=
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
-@@ -59,6 +59,19 @@ config ATH9K_AHB
+@@ -60,6 +60,19 @@ config ATH9K_AHB
Say Y, if you have a SoC with a compatible built-in
wireless MAC. Say N if unsure.
diff --git a/package/kernel/mac80211/patches/ath/552-ahb_of.patch b/package/kernel/mac80211/patches/ath/552-ahb_of.patch
index 08735d2871..1170fc64bd 100644
--- a/package/kernel/mac80211/patches/ath/552-ahb_of.patch
+++ b/package/kernel/mac80211/patches/ath/552-ahb_of.patch
@@ -318,7 +318,7 @@
#include "common.h"
#include "debug.h"
-@@ -1023,6 +1024,9 @@ struct ath_softc {
+@@ -1011,6 +1012,9 @@ struct ath_softc {
struct ath_hw *sc_ah;
void __iomem *mem;
int irq;
diff --git a/package/kernel/mac80211/patches/ath/554-ath9k-dynack-move-debug-log-after-buffer-increments.patch b/package/kernel/mac80211/patches/ath/554-ath9k-dynack-move-debug-log-after-buffer-increments.patch
deleted file mode 100644
index 607722cc3d..0000000000
--- a/package/kernel/mac80211/patches/ath/554-ath9k-dynack-move-debug-log-after-buffer-increments.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
-Date: Fri, 2 Nov 2018 21:49:56 +0100
-Subject: [PATCH] ath9k: dynack: move debug log after buffer increments
-
-Move debug log in ath_dynack_sample_tx_ts and ath_dynack_sample_ack_ts
-after timestamp buffer head/tail increments in order to make debugging
-more user friendly
-
-Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/dynack.c
-+++ b/drivers/net/wireless/ath/ath9k/dynack.c
-@@ -178,11 +178,12 @@ void ath_dynack_sample_tx_ts(struct ath_
- struct ath_tx_status *ts,
- struct ieee80211_sta *sta)
- {
-- u8 ridx;
- struct ieee80211_hdr *hdr;
- struct ath_dynack *da = &ah->dynack;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-+ u32 dur = ts->duration;
-+ u8 ridx;
-
- if (!da->enabled || (info->flags & IEEE80211_TX_CTL_NO_ACK))
- return;
-@@ -217,14 +218,13 @@ void ath_dynack_sample_tx_ts(struct ath_
- ridx = ts->ts_rateindex;
-
- da->st_rbf.ts[da->st_rbf.t_rb].tstamp = ts->ts_tstamp;
-- da->st_rbf.ts[da->st_rbf.t_rb].dur = ts->duration;
- ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_dest, hdr->addr1);
- ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_src, hdr->addr2);
-
- if (!(info->status.rates[ridx].flags & IEEE80211_TX_RC_MCS)) {
-- u32 phy, sifs;
- const struct ieee80211_rate *rate;
- struct ieee80211_tx_rate *rates = info->status.rates;
-+ u32 phy;
-
- rate = &common->sbands[info->band].bitrates[rates[ridx].idx];
- if (info->band == NL80211_BAND_2GHZ &&
-@@ -233,19 +233,18 @@ void ath_dynack_sample_tx_ts(struct ath_
- else
- phy = WLAN_RC_PHY_OFDM;
-
-- sifs = ath_dynack_get_sifs(ah, phy);
-- da->st_rbf.ts[da->st_rbf.t_rb].dur -= sifs;
-+ dur -= ath_dynack_get_sifs(ah, phy);
- }
--
-- ath_dbg(common, DYNACK, "{%pM} tx sample %u [dur %u][h %u-t %u]\n",
-- hdr->addr1, da->st_rbf.ts[da->st_rbf.t_rb].tstamp,
-- da->st_rbf.ts[da->st_rbf.t_rb].dur, da->st_rbf.h_rb,
-- (da->st_rbf.t_rb + 1) % ATH_DYN_BUF);
-+ da->st_rbf.ts[da->st_rbf.t_rb].dur = dur;
-
- INCR(da->st_rbf.t_rb, ATH_DYN_BUF);
- if (da->st_rbf.t_rb == da->st_rbf.h_rb)
- INCR(da->st_rbf.h_rb, ATH_DYN_BUF);
-
-+ ath_dbg(common, DYNACK, "{%pM} tx sample %u [dur %u][h %u-t %u]\n",
-+ hdr->addr1, ts->ts_tstamp, dur, da->st_rbf.h_rb,
-+ da->st_rbf.t_rb);
-+
- ath_dynack_compute_to(ah);
-
- spin_unlock_bh(&da->qlock);
-@@ -272,14 +271,13 @@ void ath_dynack_sample_ack_ts(struct ath
- spin_lock_bh(&da->qlock);
- da->ack_rbf.tstamp[da->ack_rbf.t_rb] = ts;
-
-- ath_dbg(common, DYNACK, "rx sample %u [h %u-t %u]\n",
-- da->ack_rbf.tstamp[da->ack_rbf.t_rb],
-- da->ack_rbf.h_rb, (da->ack_rbf.t_rb + 1) % ATH_DYN_BUF);
--
- INCR(da->ack_rbf.t_rb, ATH_DYN_BUF);
- if (da->ack_rbf.t_rb == da->ack_rbf.h_rb)
- INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
-
-+ ath_dbg(common, DYNACK, "rx sample %u [h %u-t %u]\n",
-+ ts, da->ack_rbf.h_rb, da->ack_rbf.t_rb);
-+
- ath_dynack_compute_to(ah);
-
- spin_unlock_bh(&da->qlock);
diff --git a/package/kernel/mac80211/patches/ath/557-ath9k-dynack-remove-experimental-tag.patch b/package/kernel/mac80211/patches/ath/557-ath9k-dynack-remove-experimental-tag.patch
deleted file mode 100644
index 2e4cffd1fa..0000000000
--- a/package/kernel/mac80211/patches/ath/557-ath9k-dynack-remove-experimental-tag.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
-Date: Fri, 2 Nov 2018 21:49:59 +0100
-Subject: [PATCH] ath9k: dynack: remove 'experimental' tag
-
-Remove experimental tag from dynack Kconfig entry since it has
-been tested on outdoor 25Km links
-
-Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/Kconfig
-+++ b/drivers/net/wireless/ath/ath9k/Kconfig
-@@ -132,7 +132,7 @@ config ATH9K_DFS_CERTIFIED
- except increase code size.
-
- config ATH9K_DYNACK
-- bool "Atheros ath9k ACK timeout estimation algorithm (EXPERIMENTAL)"
-+ bool "Atheros ath9k ACK timeout estimation algorithm"
- depends on ATH9K
- default n
- ---help---
diff --git a/package/kernel/mac80211/patches/ath/921-ath10k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/ath/921-ath10k_init_devices_synchronously.patch
index 47ecc9c655..3a16b08a44 100644
--- a/package/kernel/mac80211/patches/ath/921-ath10k_init_devices_synchronously.patch
+++ b/package/kernel/mac80211/patches/ath/921-ath10k_init_devices_synchronously.patch
@@ -14,8 +14,8 @@ Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -2720,6 +2720,16 @@ int ath10k_core_register(struct ath10k *
- ar->chip_id = chip_id;
+@@ -3003,6 +3003,16 @@ int ath10k_core_register(struct ath10k *
+
queue_work(ar->workqueue, &ar->register_work);
+ /* OpenWrt requires all PHYs to be initialized to create the
diff --git a/package/kernel/mac80211/patches/ath/930-ath10k_add_tpt_led_trigger.patch b/package/kernel/mac80211/patches/ath/930-ath10k_add_tpt_led_trigger.patch
index 3fd6bca819..352a49c4c3 100644
--- a/package/kernel/mac80211/patches/ath/930-ath10k_add_tpt_led_trigger.patch
+++ b/package/kernel/mac80211/patches/ath/930-ath10k_add_tpt_led_trigger.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -8282,6 +8282,21 @@ static int ath10k_mac_init_rd(struct ath
+@@ -8483,6 +8483,21 @@ static int ath10k_mac_init_rd(struct ath
return 0;
}
@@ -22,9 +22,9 @@
int ath10k_mac_register(struct ath10k *ar)
{
static const u32 cipher_suites[] = {
-@@ -8571,6 +8586,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -8806,6 +8821,12 @@ int ath10k_mac_register(struct ath10k *a
- wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+ ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
+#ifdef CPTCFG_MAC80211_LEDS
+ ieee80211_create_tpt_led_trigger(ar->hw,
diff --git a/package/kernel/mac80211/patches/ath/960-0010-ath10k-limit-htt-rx-ring-size.patch b/package/kernel/mac80211/patches/ath/960-0010-ath10k-limit-htt-rx-ring-size.patch
index 810e97a783..05fce6a168 100644
--- a/package/kernel/mac80211/patches/ath/960-0010-ath10k-limit-htt-rx-ring-size.patch
+++ b/package/kernel/mac80211/patches/ath/960-0010-ath10k-limit-htt-rx-ring-size.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
-@@ -238,7 +238,7 @@ enum htt_rx_ring_flags {
+@@ -226,7 +226,7 @@ enum htt_rx_ring_flags {
};
#define HTT_RX_RING_SIZE_MIN 128
diff --git a/package/kernel/mac80211/patches/ath/960-0011-ath10k-limit-pci-buffer-size.patch b/package/kernel/mac80211/patches/ath/960-0011-ath10k-limit-pci-buffer-size.patch
index 283f4d819f..0c25fb3f04 100644
--- a/package/kernel/mac80211/patches/ath/960-0011-ath10k-limit-pci-buffer-size.patch
+++ b/package/kernel/mac80211/patches/ath/960-0011-ath10k-limit-pci-buffer-size.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
-@@ -142,7 +142,7 @@ static struct ce_attr host_ce_config_wla
+@@ -131,7 +131,7 @@ static struct ce_attr host_ce_config_wla
.flags = CE_ATTR_FLAGS,
.src_nentries = 0,
.src_sz_max = 2048,
@@ -9,7 +9,7 @@
.recv_cb = ath10k_pci_htt_htc_rx_cb,
},
-@@ -151,7 +151,7 @@ static struct ce_attr host_ce_config_wla
+@@ -140,7 +140,7 @@ static struct ce_attr host_ce_config_wla
.flags = CE_ATTR_FLAGS,
.src_nentries = 0,
.src_sz_max = 2048,
@@ -18,7 +18,7 @@
.recv_cb = ath10k_pci_htc_rx_cb,
},
-@@ -178,7 +178,7 @@ static struct ce_attr host_ce_config_wla
+@@ -167,7 +167,7 @@ static struct ce_attr host_ce_config_wla
.flags = CE_ATTR_FLAGS,
.src_nentries = 0,
.src_sz_max = 512,
@@ -27,7 +27,7 @@
.recv_cb = ath10k_pci_htt_rx_cb,
},
-@@ -203,7 +203,7 @@ static struct ce_attr host_ce_config_wla
+@@ -192,7 +192,7 @@ static struct ce_attr host_ce_config_wla
.flags = CE_ATTR_FLAGS,
.src_nentries = 0,
.src_sz_max = 2048,
diff --git a/package/kernel/mac80211/patches/ath/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch b/package/kernel/mac80211/patches/ath/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch
index d8f6887cd0..df4223fcb8 100644
--- a/package/kernel/mac80211/patches/ath/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch
+++ b/package/kernel/mac80211/patches/ath/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch
@@ -23,7 +23,7 @@ v9: use SM/MS macros from code.h to simplify shift/mask handling
3 files changed, 52 insertions(+), 23 deletions(-)
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -2469,7 +2469,7 @@ static void ath10k_peer_assoc_h_vht(stru
+@@ -2475,7 +2475,7 @@ static void ath10k_peer_assoc_h_vht(stru
const u16 *vht_mcs_mask;
u8 ampdu_factor;
u8 max_nss, vht_mcs;
@@ -32,7 +32,7 @@ v9: use SM/MS macros from code.h to simplify shift/mask handling
if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
return;
-@@ -2529,23 +2529,45 @@ static void ath10k_peer_assoc_h_vht(stru
+@@ -2535,23 +2535,45 @@ static void ath10k_peer_assoc_h_vht(stru
__le16_to_cpu(vht_cap->vht_mcs.tx_highest);
arg->peer_vht_rates.tx_mcs_set = ath10k_peer_assoc_h_vht_limit(
__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask);
@@ -92,7 +92,7 @@ v9: use SM/MS macros from code.h to simplify shift/mask handling
}
static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
-@@ -2697,9 +2719,9 @@ static int ath10k_peer_assoc_prepare(str
+@@ -2703,9 +2725,9 @@ static int ath10k_peer_assoc_prepare(str
ath10k_peer_assoc_h_crypto(ar, vif, sta, arg);
ath10k_peer_assoc_h_rates(ar, vif, sta, arg);
ath10k_peer_assoc_h_ht(ar, vif, sta, arg);
@@ -105,7 +105,7 @@ v9: use SM/MS macros from code.h to simplify shift/mask handling
}
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -7357,12 +7357,7 @@ ath10k_wmi_peer_assoc_fill_10_4(struct a
+@@ -7552,12 +7552,7 @@ ath10k_wmi_peer_assoc_fill_10_4(struct a
struct wmi_10_4_peer_assoc_complete_cmd *cmd = buf;
ath10k_wmi_peer_assoc_fill_10_2(ar, buf, arg);
@@ -121,7 +121,7 @@ v9: use SM/MS macros from code.h to simplify shift/mask handling
static int
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
-@@ -6357,7 +6357,19 @@ struct wmi_10_2_peer_assoc_complete_cmd
+@@ -6468,7 +6468,19 @@ struct wmi_10_2_peer_assoc_complete_cmd
__le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
} __packed;
diff --git a/package/kernel/mac80211/patches/ath/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch b/package/kernel/mac80211/patches/ath/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch
index 9a7c749cb1..2863e4b4b6 100644
--- a/package/kernel/mac80211/patches/ath/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch
+++ b/package/kernel/mac80211/patches/ath/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch
@@ -13,7 +13,7 @@ v2: fix trailing whitespace issue and fix some typos within the commit note
2 files changed, 8 insertions(+), 10 deletions(-)
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -4473,13 +4473,6 @@ static struct ieee80211_sta_vht_cap ath1
+@@ -4533,13 +4533,6 @@ static struct ieee80211_sta_vht_cap ath1
vht_cap.cap |= val;
}
@@ -29,7 +29,7 @@ v2: fix trailing whitespace issue and fix some typos within the commit note
if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -1677,13 +1677,18 @@ void ath10k_wmi_put_wmi_channel(struct w
+@@ -1700,13 +1700,18 @@ void ath10k_wmi_put_wmi_channel(struct w
flags |= WMI_CHAN_FLAG_HT40_PLUS;
if (arg->chan_radar)
flags |= WMI_CHAN_FLAG_DFS;
diff --git a/package/kernel/mac80211/patches/ath/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch b/package/kernel/mac80211/patches/ath/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
index 50ed63b065..1fd255b121 100644
--- a/package/kernel/mac80211/patches/ath/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
+++ b/package/kernel/mac80211/patches/ath/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
@@ -85,7 +85,7 @@ v13:
create mode 100644 drivers/net/wireless/ath/ath10k/leds.h
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
-@@ -69,6 +69,16 @@ config ATH10K_DEBUGFS
+@@ -71,6 +71,16 @@ config ATH10K_DEBUGFS
If unsure, say Y to make it easier to debug problems.
@@ -124,7 +124,7 @@ v13:
WCN36XX=
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -34,6 +34,7 @@
+@@ -24,6 +24,7 @@
#include "testmode.h"
#include "wmi-ops.h"
#include "coredump.h"
@@ -132,47 +132,47 @@ v13:
unsigned int ath10k_debug_mask;
static unsigned int ath10k_cryptmode_param;
-@@ -64,6 +65,7 @@ static const struct ath10k_hw_params ath
- .id = QCA988X_HW_2_0_VERSION,
+@@ -55,6 +56,7 @@ static const struct ath10k_hw_params ath
.dev_id = QCA988X_2_0_DEVICE_ID,
+ .bus = ATH10K_BUS_PCI,
.name = "qca988x hw2.0",
+ .led_pin = 1,
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
-@@ -129,6 +131,7 @@ static const struct ath10k_hw_params ath
- .id = QCA9887_HW_1_0_VERSION,
+@@ -123,6 +125,7 @@ static const struct ath10k_hw_params ath
.dev_id = QCA9887_1_0_DEVICE_ID,
+ .bus = ATH10K_BUS_PCI,
.name = "qca9887 hw1.0",
+ .led_pin = 1,
.patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
-@@ -293,6 +296,7 @@ static const struct ath10k_hw_params ath
- .id = QCA99X0_HW_2_0_DEV_VERSION,
+@@ -297,6 +300,7 @@ static const struct ath10k_hw_params ath
.dev_id = QCA99X0_2_0_DEVICE_ID,
+ .bus = ATH10K_BUS_PCI,
.name = "qca99x0 hw2.0",
+ .led_pin = 17,
.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.otp_exe_param = 0x00000700,
-@@ -331,6 +335,7 @@ static const struct ath10k_hw_params ath
- .id = QCA9984_HW_1_0_DEV_VERSION,
+@@ -337,6 +341,7 @@ static const struct ath10k_hw_params ath
.dev_id = QCA9984_1_0_DEVICE_ID,
+ .bus = ATH10K_BUS_PCI,
.name = "qca9984/qca9994 hw1.0",
+ .led_pin = 17,
.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
-@@ -374,6 +379,7 @@ static const struct ath10k_hw_params ath
- .id = QCA9888_HW_2_0_DEV_VERSION,
+@@ -384,6 +389,7 @@ static const struct ath10k_hw_params ath
.dev_id = QCA9888_2_0_DEVICE_ID,
+ .bus = ATH10K_BUS_PCI,
.name = "qca9888 hw2.0",
+ .led_pin = 17,
.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
-@@ -2441,6 +2447,10 @@ int ath10k_core_start(struct ath10k *ar,
+@@ -2720,6 +2726,10 @@ int ath10k_core_start(struct ath10k *ar,
if (status)
goto err_hif_stop;
@@ -183,7 +183,7 @@ v13:
return 0;
err_hif_stop:
-@@ -2695,9 +2705,18 @@ static void ath10k_core_register_work(st
+@@ -2976,9 +2986,18 @@ static void ath10k_core_register_work(st
goto err_spectral_destroy;
}
@@ -202,7 +202,7 @@ v13:
err_spectral_destroy:
ath10k_spectral_destroy(ar);
err_debug_destroy:
-@@ -2741,6 +2760,8 @@ void ath10k_core_unregister(struct ath10
+@@ -3024,6 +3043,8 @@ void ath10k_core_unregister(struct ath10
if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
return;
@@ -213,7 +213,7 @@ v13:
* relayfs debugfs file cleanly. Otherwise the parent debugfs tree
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
-@@ -25,6 +25,7 @@
+@@ -14,6 +14,7 @@
#include <linux/pci.h>
#include <linux/uuid.h>
#include <linux/time.h>
@@ -221,15 +221,7 @@ v13:
#include "htt.h"
#include "htc.h"
-@@ -908,7 +909,6 @@ struct ath10k {
- u32 low_5ghz_chan;
- u32 high_5ghz_chan;
- bool ani_enabled;
--
- bool p2p;
-
- struct {
-@@ -1099,6 +1099,13 @@ struct ath10k {
+@@ -1150,6 +1151,13 @@ struct ath10k {
} testmode;
struct {
@@ -245,7 +237,7 @@ v13:
u32 fw_warm_reset_counter;
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
-@@ -504,6 +504,7 @@ struct ath10k_hw_params {
+@@ -511,6 +511,7 @@ struct ath10k_hw_params {
const char *name;
u32 patch_load_addr;
int uart_pin;
@@ -405,7 +397,7 @@ v13:
+#endif /* _LEDS_H_ */
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -33,6 +33,7 @@
+@@ -23,6 +23,7 @@
#include "wmi-tlv.h"
#include "wmi-ops.h"
#include "wow.h"
@@ -416,9 +408,9 @@ v13:
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -216,7 +216,10 @@ struct wmi_ops {
- struct sk_buff *(*gen_echo)(struct ath10k *ar, u32 value);
- struct sk_buff *(*gen_pdev_get_tpc_table_cmdid)(struct ath10k *ar,
- u32 param);
+ struct sk_buff *(*gen_bb_timing)
+ (struct ath10k *ar,
+ const struct wmi_bb_timing_cfg_arg *arg);
+ struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num,
+ u32 input, u32 pull_type, u32 intr_mode);
@@ -426,7 +418,7 @@ v13:
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
-@@ -1054,6 +1057,35 @@ ath10k_wmi_force_fw_hang(struct ath10k *
+@@ -1080,6 +1083,35 @@ ath10k_wmi_force_fw_hang(struct ath10k *
return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
}
@@ -464,7 +456,7 @@ v13:
{
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
-@@ -3976,6 +3976,8 @@ static const struct wmi_ops wmi_tlv_ops
+@@ -4309,6 +4309,8 @@ static const struct wmi_ops wmi_tlv_ops
.gen_echo = ath10k_wmi_tlv_op_gen_echo,
.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
@@ -475,7 +467,7 @@ v13:
static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -7177,6 +7177,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
+@@ -7372,6 +7372,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
return skb;
}
@@ -525,7 +517,7 @@ v13:
static struct sk_buff *
ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
enum wmi_sta_ps_mode psmode)
-@@ -8788,6 +8831,9 @@ static const struct wmi_ops wmi_ops = {
+@@ -9004,6 +9047,9 @@ static const struct wmi_ops wmi_ops = {
.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
.gen_echo = ath10k_wmi_op_gen_echo,
@@ -535,7 +527,7 @@ v13:
/* .gen_bcn_tmpl not implemented */
/* .gen_prb_tmpl not implemented */
/* .gen_p2p_go_bcn_ie not implemented */
-@@ -8858,6 +8904,8 @@ static const struct wmi_ops wmi_10_1_ops
+@@ -9074,6 +9120,8 @@ static const struct wmi_ops wmi_10_1_ops
.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
.gen_echo = ath10k_wmi_op_gen_echo,
@@ -544,7 +536,7 @@ v13:
/* .gen_bcn_tmpl not implemented */
/* .gen_prb_tmpl not implemented */
/* .gen_p2p_go_bcn_ie not implemented */
-@@ -8929,6 +8977,8 @@ static const struct wmi_ops wmi_10_2_ops
+@@ -9146,6 +9194,8 @@ static const struct wmi_ops wmi_10_2_ops
.gen_delba_send = ath10k_wmi_op_gen_delba_send,
.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
@@ -553,16 +545,16 @@ v13:
/* .gen_pdev_enable_adaptive_cca not implemented */
};
-@@ -8999,6 +9049,8 @@ static const struct wmi_ops wmi_10_2_4_o
- .gen_pdev_enable_adaptive_cca =
+@@ -9217,6 +9267,8 @@ static const struct wmi_ops wmi_10_2_4_o
ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
.get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
+ .gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing,
+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
/* .gen_bcn_tmpl not implemented */
/* .gen_prb_tmpl not implemented */
/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9078,6 +9130,8 @@ static const struct wmi_ops wmi_10_4_ops
+@@ -9297,6 +9349,8 @@ static const struct wmi_ops wmi_10_4_ops
.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
.gen_echo = ath10k_wmi_op_gen_echo,
.gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
@@ -573,7 +565,7 @@ v13:
int ath10k_wmi_attach(struct ath10k *ar)
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
-@@ -2942,6 +2942,41 @@ enum wmi_10_4_feature_mask {
+@@ -2998,6 +2998,41 @@ enum wmi_10_4_feature_mask {
};
diff --git a/package/kernel/mac80211/patches/ath/975-ath10k-use-tpt-trigger-by-default.patch b/package/kernel/mac80211/patches/ath/975-ath10k-use-tpt-trigger-by-default.patch
index dfe2829468..60801243fb 100644
--- a/package/kernel/mac80211/patches/ath/975-ath10k-use-tpt-trigger-by-default.patch
+++ b/package/kernel/mac80211/patches/ath/975-ath10k-use-tpt-trigger-by-default.patch
@@ -16,9 +16,9 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
-@@ -1144,6 +1144,10 @@ struct ath10k {
- struct ath10k_radar_found_info last_radar_info;
+@@ -1198,6 +1198,10 @@ struct ath10k {
struct work_struct radar_confirmation_work;
+ struct ath10k_bus_params bus_param;
+#ifdef CPTCFG_MAC80211_LEDS
+ const char *led_default_trigger;
@@ -42,8 +42,8 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
if (ret)
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -8603,7 +8603,7 @@ int ath10k_mac_register(struct ath10k *a
- wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+@@ -8838,7 +8838,7 @@ int ath10k_mac_register(struct ath10k *a
+ ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
#ifdef CPTCFG_MAC80211_LEDS
- ieee80211_create_tpt_led_trigger(ar->hw,
diff --git a/package/kernel/mac80211/patches/ath/976-ath10k-Limit-available-channels-via-DT-ieee80211-fre.patch b/package/kernel/mac80211/patches/ath/976-ath10k-Limit-available-channels-via-DT-ieee80211-fre.patch
deleted file mode 100644
index 260c0c7867..0000000000
--- a/package/kernel/mac80211/patches/ath/976-ath10k-Limit-available-channels-via-DT-ieee80211-fre.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From bbf0a8af2261bc7ae39b227ff6a1e9f45a008c27 Mon Sep 17 00:00:00 2001
-From: Sven Eckelmann <sven.eckelmann@openmesh.com>
-Date: Mon, 30 Jul 2018 17:31:41 +0200
-Subject: [PATCH] ath10k: Limit available channels via DT ieee80211-freq-limit
-
-Tri-band devices (1x 2.4GHz + 2x 5GHz) often incorporate special filters in
-the RX and TX path. These filtered channel can in theory still be used by
-the hardware but the signal strength is reduced so much that it makes no
-sense.
-
-There is already a DT property to limit the available channels but ath10k
-has to manually call this functionality to limit the currrently set wiphy
-channels further.
-
-Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
-
-Forwarded: https://patchwork.kernel.org/patch/10549245/
----
- drivers/net/wireless/ath/ath10k/mac.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -18,6 +18,7 @@
-
- #include "mac.h"
-
-+#include <net/cfg80211.h>
- #include <net/mac80211.h>
- #include <linux/etherdevice.h>
- #include <linux/acpi.h>
-@@ -8390,6 +8391,7 @@ int ath10k_mac_register(struct ath10k *a
- ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
- }
-
-+ wiphy_read_of_freq_limits(ar->hw->wiphy);
- ath10k_mac_setup_ht_vht_cap(ar);
-
- ar->hw->wiphy->interface_modes =
diff --git a/package/kernel/mac80211/patches/ath/977-ath10k-add-support-for-configuring-management-packet.patch b/package/kernel/mac80211/patches/ath/977-ath10k-add-support-for-configuring-management-packet.patch
deleted file mode 100644
index 4f2f64a60a..0000000000
--- a/package/kernel/mac80211/patches/ath/977-ath10k-add-support-for-configuring-management-packet.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From: Sriram R <srirrama@codeaurora.org>
-Date: Mon, 10 Sep 2018 11:09:40 +0530
-Subject: [PATCH] ath10k: add support for configuring management packet rate
-
-By default the firmware uses 1Mbps and 6Mbps rate for management packets
-in 2G and 5G bands respectively. But when the user selects different
-basic rates from the userspace, we need to send the management
-packets at the lowest basic rate selected by the user.
-
-This change makes use of WMI_VDEV_PARAM_MGMT_RATE param for configuring the
-management packets rate to the firmware.
-
-Chipsets Tested : QCA988X, QCA9887, QCA9984
-FW Tested : 10.2.4-1.0-41, 10.4-3.6.104
-
-Signed-off-by: Sriram R <srirrama@codeaurora.org>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
-Origin: backport, https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f279294e9ee22a8f306fdc8e4181cf555e6f0f70
----
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -158,6 +158,22 @@ u8 ath10k_mac_bitrate_to_idx(const struc
- return 0;
- }
-
-+static int ath10k_mac_get_rate_hw_value(int bitrate)
-+{
-+ int i;
-+ u8 hw_value_prefix = 0;
-+
-+ if (ath10k_mac_bitrate_is_cck(bitrate))
-+ hw_value_prefix = WMI_RATE_PREAMBLE_CCK << 6;
-+
-+ for (i = 0; i < sizeof(ath10k_rates); i++) {
-+ if (ath10k_rates[i].bitrate == bitrate)
-+ return hw_value_prefix | ath10k_rates[i].hw_value;
-+ }
-+
-+ return -EINVAL;
-+}
-+
- static int ath10k_mac_get_max_vht_mcs_map(u16 mcs_map, int nss)
- {
- switch ((mcs_map >> (2 * nss)) & 0x3) {
-@@ -5468,9 +5484,10 @@ static void ath10k_bss_info_changed(stru
- struct cfg80211_chan_def def;
- u32 vdev_param, pdev_param, slottime, preamble;
- u16 bitrate, hw_value;
-- u8 rate;
-- int rateidx, ret = 0;
-+ u8 rate, basic_rate_idx;
-+ int rateidx, ret = 0, hw_rate_code;
- enum nl80211_band band;
-+ const struct ieee80211_supported_band *sband;
-
- mutex_lock(&ar->conf_mutex);
-
-@@ -5676,6 +5693,30 @@ static void ath10k_bss_info_changed(stru
- arvif->vdev_id, ret);
- }
-
-+ if (changed & BSS_CHANGED_BASIC_RATES) {
-+ if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) {
-+ mutex_unlock(&ar->conf_mutex);
-+ return;
-+ }
-+
-+ sband = ar->hw->wiphy->bands[def.chan->band];
-+ basic_rate_idx = ffs(vif->bss_conf.basic_rates) - 1;
-+ bitrate = sband->bitrates[basic_rate_idx].bitrate;
-+
-+ hw_rate_code = ath10k_mac_get_rate_hw_value(bitrate);
-+ if (hw_rate_code < 0) {
-+ ath10k_warn(ar, "bitrate not supported %d\n", bitrate);
-+ mutex_unlock(&ar->conf_mutex);
-+ return;
-+ }
-+
-+ vdev_param = ar->wmi.vdev_param->mgmt_rate;
-+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
-+ hw_rate_code);
-+ if (ret)
-+ ath10k_warn(ar, "failed to set mgmt tx rate %d\n", ret);
-+ }
-+
- mutex_unlock(&ar->conf_mutex);
- }
-
diff --git a/package/kernel/mac80211/patches/ath/978-ath10k-fix-possible-out-of-bound-access-of-ath10k_ra.patch b/package/kernel/mac80211/patches/ath/978-ath10k-fix-possible-out-of-bound-access-of-ath10k_ra.patch
deleted file mode 100644
index b82b16a92b..0000000000
--- a/package/kernel/mac80211/patches/ath/978-ath10k-fix-possible-out-of-bound-access-of-ath10k_ra.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Sriram R <srirrama@codeaurora.org>
-Date: Wed, 3 Oct 2018 08:43:50 +0530
-Subject: [PATCH] ath10k: fix possible out of bound access of ath10k_rates array
-
-While using 'ath10k_mac_get_rate_hw_value()' to obtain the hw value
-from the passed bitrate, there is a chance of out of bound array access
-when wrong bitrate is passed. This is fixed by comparing the bitrates
-within the correct size of the ath10k_rates array.
-
-Fixes commit f279294e9ee2 ("ath10k: add support for configuring management
-packet rate"). Also correction made to some indents used in the above commit.
-
-Signed-off-by: Sriram R <srirrama@codeaurora.org>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
-Origin: backport, https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=34e141eea7dd8525dd1ef7a925459e455b4d307f
----
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -166,7 +166,7 @@ static int ath10k_mac_get_rate_hw_value(
- if (ath10k_mac_bitrate_is_cck(bitrate))
- hw_value_prefix = WMI_RATE_PREAMBLE_CCK << 6;
-
-- for (i = 0; i < sizeof(ath10k_rates); i++) {
-+ for (i = 0; i < ARRAY_SIZE(ath10k_rates); i++) {
- if (ath10k_rates[i].bitrate == bitrate)
- return hw_value_prefix | ath10k_rates[i].hw_value;
- }
-@@ -5699,22 +5699,22 @@ static void ath10k_bss_info_changed(stru
- return;
- }
-
-- sband = ar->hw->wiphy->bands[def.chan->band];
-- basic_rate_idx = ffs(vif->bss_conf.basic_rates) - 1;
-- bitrate = sband->bitrates[basic_rate_idx].bitrate;
--
-- hw_rate_code = ath10k_mac_get_rate_hw_value(bitrate);
-- if (hw_rate_code < 0) {
-- ath10k_warn(ar, "bitrate not supported %d\n", bitrate);
-- mutex_unlock(&ar->conf_mutex);
-- return;
-- }
-+ sband = ar->hw->wiphy->bands[def.chan->band];
-+ basic_rate_idx = ffs(vif->bss_conf.basic_rates) - 1;
-+ bitrate = sband->bitrates[basic_rate_idx].bitrate;
-+
-+ hw_rate_code = ath10k_mac_get_rate_hw_value(bitrate);
-+ if (hw_rate_code < 0) {
-+ ath10k_warn(ar, "bitrate not supported %d\n", bitrate);
-+ mutex_unlock(&ar->conf_mutex);
-+ return;
-+ }
-
-- vdev_param = ar->wmi.vdev_param->mgmt_rate;
-- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
-- hw_rate_code);
-- if (ret)
-- ath10k_warn(ar, "failed to set mgmt tx rate %d\n", ret);
-+ vdev_param = ar->wmi.vdev_param->mgmt_rate;
-+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
-+ hw_rate_code);
-+ if (ret)
-+ ath10k_warn(ar, "failed to set mgmt tx rate %d\n", ret);
- }
-
- mutex_unlock(&ar->conf_mutex);
diff --git a/package/kernel/mac80211/patches/ath/979-ath10k-fix-incorrect-multicast-broadcast-rate-settin.patch b/package/kernel/mac80211/patches/ath/979-ath10k-fix-incorrect-multicast-broadcast-rate-settin.patch
index 8695b7e094..0c98be2ada 100644
--- a/package/kernel/mac80211/patches/ath/979-ath10k-fix-incorrect-multicast-broadcast-rate-settin.patch
+++ b/package/kernel/mac80211/patches/ath/979-ath10k-fix-incorrect-multicast-broadcast-rate-settin.patch
@@ -17,7 +17,7 @@ Origin: other, https://patchwork.kernel.org/patch/10723033/
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -5484,8 +5484,8 @@ static void ath10k_bss_info_changed(stru
+@@ -5604,8 +5604,8 @@ static void ath10k_bss_info_changed(stru
struct cfg80211_chan_def def;
u32 vdev_param, pdev_param, slottime, preamble;
u16 bitrate, hw_value;
@@ -28,9 +28,9 @@ Origin: other, https://patchwork.kernel.org/patch/10723033/
enum nl80211_band band;
const struct ieee80211_supported_band *sband;
-@@ -5658,7 +5658,11 @@ static void ath10k_bss_info_changed(stru
+@@ -5792,7 +5792,11 @@ static void ath10k_bss_info_changed(stru
if (changed & BSS_CHANGED_MCAST_RATE &&
- !WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def))) {
+ !ath10k_mac_vif_chan(arvif->vif, &def)) {
band = def.chan->band;
- rateidx = vif->bss_conf.mcast_rate[band] - 1;
+ mcast_rate = vif->bss_conf.mcast_rate[band];
diff --git a/package/kernel/mac80211/patches/ath/980-ath10k-fix-max-antenna-gain-unit.patch b/package/kernel/mac80211/patches/ath/980-ath10k-fix-max-antenna-gain-unit.patch
index 9cd23ce1b7..49f6057799 100644
--- a/package/kernel/mac80211/patches/ath/980-ath10k-fix-max-antenna-gain-unit.patch
+++ b/package/kernel/mac80211/patches/ath/980-ath10k-fix-max-antenna-gain-unit.patch
@@ -20,7 +20,7 @@ Forwarded: https://patchwork.kernel.org/patch/10986723/
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -1020,7 +1020,7 @@ static int ath10k_monitor_vdev_start(str
+@@ -1009,7 +1009,7 @@ static int ath10k_monitor_vdev_start(str
arg.channel.min_power = 0;
arg.channel.max_power = channel->max_power * 2;
arg.channel.max_reg_power = channel->max_reg_power * 2;
@@ -29,7 +29,7 @@ Forwarded: https://patchwork.kernel.org/patch/10986723/
reinit_completion(&ar->vdev_setup_done);
-@@ -1462,7 +1462,7 @@ static int ath10k_vdev_start_restart(str
+@@ -1451,7 +1451,7 @@ static int ath10k_vdev_start_restart(str
arg.channel.min_power = 0;
arg.channel.max_power = chandef->chan->max_power * 2;
arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
@@ -38,7 +38,7 @@ Forwarded: https://patchwork.kernel.org/patch/10986723/
if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
arg.ssid = arvif->u.ap.ssid;
-@@ -3139,7 +3139,7 @@ static int ath10k_update_channel_list(st
+@@ -3128,7 +3128,7 @@ static int ath10k_update_channel_list(st
ch->min_power = 0;
ch->max_power = channel->max_power * 2;
ch->max_reg_power = channel->max_reg_power * 2;
diff --git a/package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch b/package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch
index 07247a0577..bea5eaa7ae 100644
--- a/package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch
+++ b/package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch
@@ -28,8 +28,8 @@ Forwarded: no
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -988,6 +988,40 @@ static inline int ath10k_vdev_setup_sync
- return 0;
+@@ -977,6 +977,40 @@ static inline int ath10k_vdev_setup_sync
+ return ar->last_wmi_vdev_start_status;
}
+static u32 ath10k_get_max_antenna_gain(struct ath10k *ar,
@@ -69,7 +69,7 @@ Forwarded: no
static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
{
struct cfg80211_chan_def *chandef = NULL;
-@@ -1020,7 +1054,8 @@ static int ath10k_monitor_vdev_start(str
+@@ -1009,7 +1043,8 @@ static int ath10k_monitor_vdev_start(str
arg.channel.min_power = 0;
arg.channel.max_power = channel->max_power * 2;
arg.channel.max_reg_power = channel->max_reg_power * 2;
@@ -79,7 +79,7 @@ Forwarded: no
reinit_completion(&ar->vdev_setup_done);
-@@ -1462,7 +1497,8 @@ static int ath10k_vdev_start_restart(str
+@@ -1451,7 +1486,8 @@ static int ath10k_vdev_start_restart(str
arg.channel.min_power = 0;
arg.channel.max_power = chandef->chan->max_power * 2;
arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
@@ -89,7 +89,7 @@ Forwarded: no
if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
arg.ssid = arvif->u.ap.ssid;
-@@ -3139,7 +3175,8 @@ static int ath10k_update_channel_list(st
+@@ -3128,7 +3164,8 @@ static int ath10k_update_channel_list(st
ch->min_power = 0;
ch->max_power = channel->max_power * 2;
ch->max_reg_power = channel->max_reg_power * 2;
diff --git a/package/kernel/mac80211/patches/brcm/040-brcmutil_option.patch b/package/kernel/mac80211/patches/brcm/040-brcmutil_option.patch
index 167332d916..3e8505b5b4 100644
--- a/package/kernel/mac80211/patches/brcm/040-brcmutil_option.patch
+++ b/package/kernel/mac80211/patches/brcm/040-brcmutil_option.patch
@@ -1,6 +1,7 @@
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
-@@ -1,5 +1,5 @@
+@@ -1,6 +1,6 @@
+ # SPDX-License-Identifier: GPL-2.0-only
config BRCMUTIL
- tristate
+ tristate "Broadcom 802.11 driver utility functions"
diff --git a/package/kernel/mac80211/patches/brcm/300-v4.20-0001-brcmfmac-add-CYW89342-mini-PCIe-device.patch b/package/kernel/mac80211/patches/brcm/300-v4.20-0001-brcmfmac-add-CYW89342-mini-PCIe-device.patch
deleted file mode 100644
index d0d9b20373..0000000000
--- a/package/kernel/mac80211/patches/brcm/300-v4.20-0001-brcmfmac-add-CYW89342-mini-PCIe-device.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 2fef681a4cf7994c882190fd2417b95f30510afb Mon Sep 17 00:00:00 2001
-From: Jia-Shyr Chuang <saint.chuang@cypress.com>
-Date: Wed, 15 Aug 2018 04:23:09 -0500
-Subject: [PATCH] brcmfmac: add CYW89342 mini-PCIe device
-
-CYW89342 is a 2x2 MIMO, 802.11a/b/g/n/ac for WLAN. It is a member of
-4355/4359 family.
-
-Signed-off-by: Jia-Shyr Chuang <saint.chuang@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -2017,6 +2017,7 @@ static const struct dev_pm_ops brcmf_pci
-
- static const struct pci_device_id brcmf_pcie_devid_table[] = {
- BRCMF_PCIE_DEVICE(BRCM_PCIE_4350_DEVICE_ID),
-+ BRCMF_PCIE_DEVICE_SUB(0x4355, BRCM_PCIE_VENDOR_ID_BROADCOM, 0x4355),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
diff --git a/package/kernel/mac80211/patches/brcm/302-v4.20-0001-brcmfmac-fix-wrong-strnchr-usage.patch b/package/kernel/mac80211/patches/brcm/302-v4.20-0001-brcmfmac-fix-wrong-strnchr-usage.patch
deleted file mode 100644
index 8267b37864..0000000000
--- a/package/kernel/mac80211/patches/brcm/302-v4.20-0001-brcmfmac-fix-wrong-strnchr-usage.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From cb18e2e9ec71d42409a51b83546686c609780dde Mon Sep 17 00:00:00 2001
-From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
-Date: Wed, 22 Aug 2018 15:22:15 +0200
-Subject: [PATCH] brcmfmac: fix wrong strnchr usage
-
-strnchr takes arguments in the order of its name: string, max bytes to
-read, character to search for. Here we're passing '\n' aka 10 as the
-buffer size, and searching for sizeof(buf) aka BRCMF_DCMD_SMLEN aka
-256 (aka '\0', since it's implicitly converted to char) within those 10
-bytes.
-
-Just interchanging the last two arguments would still leave a bug,
-because if we've been successful once, there are not sizeof(buf)
-characters left after the new value of p.
-
-Since clmver is immediately afterwards passed as a %s argument, I assume
-that it is actually a properly nul-terminated string. For that case, we
-have strreplace().
-
-Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-@@ -296,9 +296,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- /* Replace all newline/linefeed characters with space
- * character
- */
-- ptr = clmver;
-- while ((ptr = strnchr(ptr, '\n', sizeof(buf))) != NULL)
-- *ptr = ' ';
-+ strreplace(clmver, '\n', ' ');
-
- brcmf_dbg(INFO, "CLM version = %s\n", clmver);
- }
diff --git a/package/kernel/mac80211/patches/brcm/304-v4.20-0002-brcmfmac-increase-buffer-for-obtaining-firmware-capa.patch b/package/kernel/mac80211/patches/brcm/304-v4.20-0002-brcmfmac-increase-buffer-for-obtaining-firmware-capa.patch
deleted file mode 100644
index 11fb4bce45..0000000000
--- a/package/kernel/mac80211/patches/brcm/304-v4.20-0002-brcmfmac-increase-buffer-for-obtaining-firmware-capa.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Arend van Spriel <arend.vanspriel@broadcom.com>
-Date: Wed, 5 Sep 2018 09:48:59 +0200
-Subject: [PATCH] brcmfmac: increase buffer for obtaining firmware capabilities
-
-When obtaining the firmware capability a buffer is provided of 512
-bytes. However, if all features in firmware are supported the buffer
-needs to be 565 bytes as otherwise truncated information is retrieved
-from firmware. Increasing the buffer to 768 bytes on stack.
-
-Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
-Reviewed-by: Franky Lin <franky.lin@broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
-@@ -178,7 +178,7 @@ static void brcmf_feat_iovar_data_set(st
- ifp->fwil_fwerr = false;
- }
-
--#define MAX_CAPS_BUFFER_SIZE 512
-+#define MAX_CAPS_BUFFER_SIZE 768
- static void brcmf_feat_firmware_capabilities(struct brcmf_if *ifp)
- {
- char caps[MAX_CAPS_BUFFER_SIZE];
diff --git a/package/kernel/mac80211/patches/brcm/305-v4.20-0001-brcmfmac-remove-set-but-not-used-variables-sfdoff-an.patch b/package/kernel/mac80211/patches/brcm/305-v4.20-0001-brcmfmac-remove-set-but-not-used-variables-sfdoff-an.patch
deleted file mode 100644
index 192ed1a770..0000000000
--- a/package/kernel/mac80211/patches/brcm/305-v4.20-0001-brcmfmac-remove-set-but-not-used-variables-sfdoff-an.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From a8254fa4ba60b85829b6e5ede6564f81cd70d59f Mon Sep 17 00:00:00 2001
-From: YueHaibing <yuehaibing@huawei.com>
-Date: Tue, 11 Sep 2018 11:24:04 +0800
-Subject: [PATCH] brcmfmac: remove set but not used variables 'sfdoff' and
- 'pad_size'
-
-Fixes gcc '-Wunused-but-set-variable' warning:
-
-drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function 'brcmf_sdio_rxglom':
-drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1466:11: warning:
- variable 'sfdoff' set but not used [-Wunused-but-set-variable]
-
-drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function 'brcmf_sdio_bus_preinit':
-drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3408:7: warning:
- variable 'pad_size' set but not used [-Wunused-but-set-variable]
-
-Signed-off-by: YueHaibing <yuehaibing@huawei.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 5 +----
- 1 file changed, 1 insertion(+), 4 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -1463,7 +1463,7 @@ static u8 brcmf_sdio_rxglom(struct brcmf
- struct sk_buff *pfirst, *pnext;
-
- int errcode;
-- u8 doff, sfdoff;
-+ u8 doff;
-
- struct brcmf_sdio_hdrinfo rd_new;
-
-@@ -1597,7 +1597,6 @@ static u8 brcmf_sdio_rxglom(struct brcmf
-
- /* Remove superframe header, remember offset */
- skb_pull(pfirst, rd_new.dat_offset);
-- sfdoff = rd_new.dat_offset;
- num = 0;
-
- /* Validate all the subframe headers */
-@@ -3405,7 +3404,6 @@ static int brcmf_sdio_bus_preinit(struct
- struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
- struct brcmf_sdio *bus = sdiodev->bus;
- struct brcmf_core *core = bus->sdio_core;
-- uint pad_size;
- u32 value;
- int err;
-
-@@ -3448,7 +3446,6 @@ static int brcmf_sdio_bus_preinit(struct
- if (sdiodev->sg_support) {
- bus->txglom = false;
- value = 1;
-- pad_size = bus->sdiodev->func2->cur_blksize << 1;
- err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom",
- &value, sizeof(u32));
- if (err < 0) {
diff --git a/package/kernel/mac80211/patches/brcm/306-v4.20-0001-brcmfmac-reduce-timeout-for-action-frame-scan.patch b/package/kernel/mac80211/patches/brcm/306-v4.20-0001-brcmfmac-reduce-timeout-for-action-frame-scan.patch
deleted file mode 100644
index a71c1aee03..0000000000
--- a/package/kernel/mac80211/patches/brcm/306-v4.20-0001-brcmfmac-reduce-timeout-for-action-frame-scan.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From edb6d6885bef82d1eac432dbeca9fbf4ec349d7e Mon Sep 17 00:00:00 2001
-From: Chung-Hsien Hsu <stanley.hsu@cypress.com>
-Date: Thu, 27 Sep 2018 14:59:44 +0000
-Subject: [PATCH] brcmfmac: reduce timeout for action frame scan
-
-Finding a common channel to send an action frame out is required for
-some action types. Since a loop with several scan retry is used to find
-the channel, a short wait time could be considered for each attempt.
-This patch reduces the wait time from 1500 to 450 msec for each action
-frame scan.
-
-This patch fixes the WFA p2p certification 5.1.20 failure caused by the
-long action frame send time.
-
-Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 9 ++++-----
- 1 file changed, 4 insertions(+), 5 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-@@ -74,7 +74,7 @@
- #define P2P_AF_MAX_WAIT_TIME msecs_to_jiffies(2000)
- #define P2P_INVALID_CHANNEL -1
- #define P2P_CHANNEL_SYNC_RETRY 5
--#define P2P_AF_FRM_SCAN_MAX_WAIT msecs_to_jiffies(1500)
-+#define P2P_AF_FRM_SCAN_MAX_WAIT msecs_to_jiffies(450)
- #define P2P_DEFAULT_SLEEP_TIME_VSDB 200
-
- /* WiFi P2P Public Action Frame OUI Subtypes */
-@@ -1134,7 +1134,6 @@ static s32 brcmf_p2p_af_searching_channe
- {
- struct afx_hdl *afx_hdl = &p2p->afx_hdl;
- struct brcmf_cfg80211_vif *pri_vif;
-- unsigned long duration;
- s32 retry;
-
- brcmf_dbg(TRACE, "Enter\n");
-@@ -1150,7 +1149,6 @@ static s32 brcmf_p2p_af_searching_channe
- * pending action frame tx is cancelled.
- */
- retry = 0;
-- duration = msecs_to_jiffies(P2P_AF_FRM_SCAN_MAX_WAIT);
- while ((retry < P2P_CHANNEL_SYNC_RETRY) &&
- (afx_hdl->peer_chan == P2P_INVALID_CHANNEL)) {
- afx_hdl->is_listen = false;
-@@ -1158,7 +1156,8 @@ static s32 brcmf_p2p_af_searching_channe
- retry);
- /* search peer on peer's listen channel */
- schedule_work(&afx_hdl->afx_work);
-- wait_for_completion_timeout(&afx_hdl->act_frm_scan, duration);
-+ wait_for_completion_timeout(&afx_hdl->act_frm_scan,
-+ P2P_AF_FRM_SCAN_MAX_WAIT);
- if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) ||
- (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL,
- &p2p->status)))
-@@ -1171,7 +1170,7 @@ static s32 brcmf_p2p_af_searching_channe
- afx_hdl->is_listen = true;
- schedule_work(&afx_hdl->afx_work);
- wait_for_completion_timeout(&afx_hdl->act_frm_scan,
-- duration);
-+ P2P_AF_FRM_SCAN_MAX_WAIT);
- }
- if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) ||
- (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL,
diff --git a/package/kernel/mac80211/patches/brcm/306-v4.20-0002-brcmfmac-fix-full-timeout-waiting-for-action-frame-o.patch b/package/kernel/mac80211/patches/brcm/306-v4.20-0002-brcmfmac-fix-full-timeout-waiting-for-action-frame-o.patch
deleted file mode 100644
index ef2d0934fc..0000000000
--- a/package/kernel/mac80211/patches/brcm/306-v4.20-0002-brcmfmac-fix-full-timeout-waiting-for-action-frame-o.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From fbf07000960d9c8a13fdc17c6de0230d681c7543 Mon Sep 17 00:00:00 2001
-From: Chung-Hsien Hsu <stanley.hsu@cypress.com>
-Date: Thu, 27 Sep 2018 14:59:49 +0000
-Subject: [PATCH] brcmfmac: fix full timeout waiting for action frame
- on-channel tx
-
-The driver sends an action frame down and waits for a completion signal
-triggered by the received BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE event
-to continue the process. However, the action frame could be transmitted
-either on the current channel or on an off channel. For the on-channel
-case, only BRCMF_E_ACTION_FRAME_COMPLETE event will be received when
-the frame is transmitted, which make the driver always wait a full
-timeout duration. This patch has the completion signal be triggered by
-receiving the BRCMF_E_ACTION_FRAME_COMPLETE event for the on-channel
-case.
-
-This change fixes WFA p2p certification 5.1.19 failure.
-
-Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 17 +++++++++++++++--
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h | 2 ++
- 2 files changed, 17 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-@@ -1457,10 +1457,12 @@ int brcmf_p2p_notify_action_tx_complete(
- return 0;
-
- if (e->event_code == BRCMF_E_ACTION_FRAME_COMPLETE) {
-- if (e->status == BRCMF_E_STATUS_SUCCESS)
-+ if (e->status == BRCMF_E_STATUS_SUCCESS) {
- set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED,
- &p2p->status);
-- else {
-+ if (!p2p->wait_for_offchan_complete)
-+ complete(&p2p->send_af_done);
-+ } else {
- set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status);
- /* If there is no ack, we don't need to wait for
- * WLC_E_ACTION_FRAME_OFFCHAN_COMPLETE event
-@@ -1511,6 +1513,17 @@ static s32 brcmf_p2p_tx_action_frame(str
- p2p->af_sent_channel = le32_to_cpu(af_params->channel);
- p2p->af_tx_sent_jiffies = jiffies;
-
-+ if (test_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status) &&
-+ p2p->af_sent_channel ==
-+ ieee80211_frequency_to_channel(p2p->remain_on_channel.center_freq))
-+ p2p->wait_for_offchan_complete = false;
-+ else
-+ p2p->wait_for_offchan_complete = true;
-+
-+ brcmf_dbg(TRACE, "Waiting for %s tx completion event\n",
-+ (p2p->wait_for_offchan_complete) ?
-+ "off-channel" : "on-channel");
-+
- timeout = wait_for_completion_timeout(&p2p->send_af_done,
- P2P_AF_MAX_WAIT_TIME);
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
-@@ -124,6 +124,7 @@ struct afx_hdl {
- * @gon_req_action: about to send go negotiation requets frame.
- * @block_gon_req_tx: drop tx go negotiation requets frame.
- * @p2pdev_dynamically: is p2p device if created by module param or supplicant.
-+ * @wait_for_offchan_complete: wait for off-channel tx completion event.
- */
- struct brcmf_p2p_info {
- struct brcmf_cfg80211_info *cfg;
-@@ -144,6 +145,7 @@ struct brcmf_p2p_info {
- bool gon_req_action;
- bool block_gon_req_tx;
- bool p2pdev_dynamically;
-+ bool wait_for_offchan_complete;
- };
-
- s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced);
diff --git a/package/kernel/mac80211/patches/brcm/320-v5.0-0001-brcmfmac-Remove-firmware-loading-code-duplication.patch b/package/kernel/mac80211/patches/brcm/320-v5.0-0001-brcmfmac-Remove-firmware-loading-code-duplication.patch
deleted file mode 100644
index eca15a516e..0000000000
--- a/package/kernel/mac80211/patches/brcm/320-v5.0-0001-brcmfmac-Remove-firmware-loading-code-duplication.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From a1a3b762163868ad07a4499a73df324f40d5ab0b Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 10 Oct 2018 13:00:58 +0200
-Subject: [PATCH] brcmfmac: Remove firmware-loading code duplication
-
-brcmf_fw_request_next_item and brcmf_fw_request_done both have identical
-code to complete the fw-request depending on the item-type.
-
-This commit adds a new brcmf_fw_complete_request helper removing this code
-duplication.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/firmware.c | 62 +++++++++++-----------
- 1 file changed, 31 insertions(+), 31 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -504,6 +504,34 @@ fail:
- return -ENOENT;
- }
-
-+static int brcmf_fw_complete_request(const struct firmware *fw,
-+ struct brcmf_fw *fwctx)
-+{
-+ struct brcmf_fw_item *cur = &fwctx->req->items[fwctx->curpos];
-+ int ret = 0;
-+
-+ brcmf_dbg(TRACE, "firmware %s %sfound\n", cur->path, fw ? "" : "not ");
-+
-+ switch (cur->type) {
-+ case BRCMF_FW_TYPE_NVRAM:
-+ ret = brcmf_fw_request_nvram_done(fw, fwctx);
-+ break;
-+ case BRCMF_FW_TYPE_BINARY:
-+ if (fw)
-+ cur->binary = fw;
-+ else
-+ ret = -ENOENT;
-+ break;
-+ default:
-+ /* something fishy here so bail out early */
-+ brcmf_err("unknown fw type: %d\n", cur->type);
-+ release_firmware(fw);
-+ ret = -EINVAL;
-+ }
-+
-+ return (cur->flags & BRCMF_FW_REQF_OPTIONAL) ? 0 : ret;
-+}
-+
- static int brcmf_fw_request_next_item(struct brcmf_fw *fwctx, bool async)
- {
- struct brcmf_fw_item *cur;
-@@ -525,15 +553,7 @@ static int brcmf_fw_request_next_item(st
- if (ret < 0) {
- brcmf_fw_request_done(NULL, fwctx);
- } else if (!async && fw) {
-- brcmf_dbg(TRACE, "firmware %s %sfound\n", cur->path,
-- fw ? "" : "not ");
-- if (cur->type == BRCMF_FW_TYPE_BINARY)
-- cur->binary = fw;
-- else if (cur->type == BRCMF_FW_TYPE_NVRAM)
-- brcmf_fw_request_nvram_done(fw, fwctx);
-- else
-- release_firmware(fw);
--
-+ brcmf_fw_complete_request(fw, fwctx);
- return -EAGAIN;
- }
- return 0;
-@@ -547,28 +567,8 @@ static void brcmf_fw_request_done(const
-
- cur = &fwctx->req->items[fwctx->curpos];
-
-- brcmf_dbg(TRACE, "enter: firmware %s %sfound\n", cur->path,
-- fw ? "" : "not ");
--
-- if (!fw)
-- ret = -ENOENT;
--
-- switch (cur->type) {
-- case BRCMF_FW_TYPE_NVRAM:
-- ret = brcmf_fw_request_nvram_done(fw, fwctx);
-- break;
-- case BRCMF_FW_TYPE_BINARY:
-- cur->binary = fw;
-- break;
-- default:
-- /* something fishy here so bail out early */
-- brcmf_err("unknown fw type: %d\n", cur->type);
-- release_firmware(fw);
-- ret = -EINVAL;
-- goto fail;
-- }
--
-- if (ret < 0 && !(cur->flags & BRCMF_FW_REQF_OPTIONAL))
-+ ret = brcmf_fw_complete_request(fw, fwctx);
-+ if (ret < 0)
- goto fail;
-
- do {
diff --git a/package/kernel/mac80211/patches/brcm/320-v5.0-0002-brcmfmac-Remove-recursion-from-firmware-load-error-h.patch b/package/kernel/mac80211/patches/brcm/320-v5.0-0002-brcmfmac-Remove-recursion-from-firmware-load-error-h.patch
deleted file mode 100644
index 1a4a1ec348..0000000000
--- a/package/kernel/mac80211/patches/brcm/320-v5.0-0002-brcmfmac-Remove-recursion-from-firmware-load-error-h.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From 5b587496dc63595b71265d986ce69728c2724370 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 10 Oct 2018 13:00:59 +0200
-Subject: [PATCH] brcmfmac: Remove recursion from firmware load error handling
-
-Before this commit brcmf_fw_request_done would call
-brcmf_fw_request_next_item to load the next item, which on an error would
-call brcmf_fw_request_done, which if the error is recoverable (*) will
-then continue calling brcmf_fw_request_next_item for the next item again
-which on an error will call brcmf_fw_request_done again...
-
-This does not blow up because we only have a limited number of items so
-we never recurse too deep. But the recursion is still quite ugly and
-frankly is giving me a headache, so lets fix this.
-
-This commit fixes this by removing brcmf_fw_request_next_item and by
-making brcmf_fw_get_firmwares and brcmf_fw_request_done directly call
-firmware_request_nowait resp. firmware_request themselves.
-
-*) brcmf_fw_request_nvram_done fallback path succeeds or
- BRCMF_FW_REQF_OPTIONAL is set
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/firmware.c | 65 +++++++---------------
- 1 file changed, 19 insertions(+), 46 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -532,33 +532,6 @@ static int brcmf_fw_complete_request(con
- return (cur->flags & BRCMF_FW_REQF_OPTIONAL) ? 0 : ret;
- }
-
--static int brcmf_fw_request_next_item(struct brcmf_fw *fwctx, bool async)
--{
-- struct brcmf_fw_item *cur;
-- const struct firmware *fw = NULL;
-- int ret;
--
-- cur = &fwctx->req->items[fwctx->curpos];
--
-- brcmf_dbg(TRACE, "%srequest for %s\n", async ? "async " : "",
-- cur->path);
--
-- if (async)
-- ret = request_firmware_nowait(THIS_MODULE, true, cur->path,
-- fwctx->dev, GFP_KERNEL, fwctx,
-- brcmf_fw_request_done);
-- else
-- ret = request_firmware(&fw, cur->path, fwctx->dev);
--
-- if (ret < 0) {
-- brcmf_fw_request_done(NULL, fwctx);
-- } else if (!async && fw) {
-- brcmf_fw_complete_request(fw, fwctx);
-- return -EAGAIN;
-- }
-- return 0;
--}
--
- static void brcmf_fw_request_done(const struct firmware *fw, void *ctx)
- {
- struct brcmf_fw *fwctx = ctx;
-@@ -568,26 +541,19 @@ static void brcmf_fw_request_done(const
- cur = &fwctx->req->items[fwctx->curpos];
-
- ret = brcmf_fw_complete_request(fw, fwctx);
-- if (ret < 0)
-- goto fail;
-
-- do {
-- if (++fwctx->curpos == fwctx->req->n_items) {
-- ret = 0;
-- goto done;
-- }
--
-- ret = brcmf_fw_request_next_item(fwctx, false);
-- } while (ret == -EAGAIN);
--
-- return;
--
--fail:
-- brcmf_dbg(TRACE, "failed err=%d: dev=%s, fw=%s\n", ret,
-- dev_name(fwctx->dev), cur->path);
-- brcmf_fw_free_request(fwctx->req);
-- fwctx->req = NULL;
--done:
-+ while (ret == 0 && ++fwctx->curpos < fwctx->req->n_items) {
-+ cur = &fwctx->req->items[fwctx->curpos];
-+ request_firmware(&fw, cur->path, fwctx->dev);
-+ ret = brcmf_fw_complete_request(fw, ctx);
-+ }
-+
-+ if (ret) {
-+ brcmf_dbg(TRACE, "failed err=%d: dev=%s, fw=%s\n", ret,
-+ dev_name(fwctx->dev), cur->path);
-+ brcmf_fw_free_request(fwctx->req);
-+ fwctx->req = NULL;
-+ }
- fwctx->done(fwctx->dev, ret, fwctx->req);
- kfree(fwctx);
- }
-@@ -611,7 +577,9 @@ int brcmf_fw_get_firmwares(struct device
- void (*fw_cb)(struct device *dev, int err,
- struct brcmf_fw_request *req))
- {
-+ struct brcmf_fw_item *first = &req->items[0];
- struct brcmf_fw *fwctx;
-+ int ret;
-
- brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev));
- if (!fw_cb)
-@@ -628,7 +596,12 @@ int brcmf_fw_get_firmwares(struct device
- fwctx->req = req;
- fwctx->done = fw_cb;
-
-- brcmf_fw_request_next_item(fwctx, true);
-+ ret = request_firmware_nowait(THIS_MODULE, true, first->path,
-+ fwctx->dev, GFP_KERNEL, fwctx,
-+ brcmf_fw_request_done);
-+ if (ret < 0)
-+ brcmf_fw_request_done(NULL, fwctx);
-+
- return 0;
- }
-
diff --git a/package/kernel/mac80211/patches/brcm/320-v5.0-0003-brcmfmac-Add-support-for-first-trying-to-get-a-board.patch b/package/kernel/mac80211/patches/brcm/320-v5.0-0003-brcmfmac-Add-support-for-first-trying-to-get-a-board.patch
deleted file mode 100644
index 727dcbe85a..0000000000
--- a/package/kernel/mac80211/patches/brcm/320-v5.0-0003-brcmfmac-Add-support-for-first-trying-to-get-a-board.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From eae8e50669e15002b195177212a6e25afbe7cf4d Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 10 Oct 2018 13:01:00 +0200
-Subject: [PATCH] brcmfmac: Add support for first trying to get a board
- specific nvram file
-
-The nvram files which some brcmfmac chips need are board-specific. To be
-able to distribute these as part of linux-firmware, so that devices with
-such a wifi chip will work OOTB, multiple (one per board) versions must
-co-exist under /lib/firmware.
-
-This commit adds support for callers of the brcmfmac/firmware.c code to
-pass in a board_type parameter through the request structure.
-
-If that parameter is set then the code will first try to load
-chipmodel.board_type.txt before falling back to the old chipmodel.txt name.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/firmware.c | 27 +++++++++++++++++++++-
- .../broadcom/brcm80211/brcmfmac/firmware.h | 1 +
- 2 files changed, 27 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -532,6 +532,31 @@ static int brcmf_fw_complete_request(con
- return (cur->flags & BRCMF_FW_REQF_OPTIONAL) ? 0 : ret;
- }
-
-+static int brcmf_fw_request_firmware(const struct firmware **fw,
-+ struct brcmf_fw *fwctx)
-+{
-+ struct brcmf_fw_item *cur = &fwctx->req->items[fwctx->curpos];
-+ int ret;
-+
-+ /* nvram files are board-specific, first try a board-specific path */
-+ if (cur->type == BRCMF_FW_TYPE_NVRAM && fwctx->req->board_type) {
-+ char alt_path[BRCMF_FW_NAME_LEN];
-+
-+ strlcpy(alt_path, cur->path, BRCMF_FW_NAME_LEN);
-+ /* strip .txt at the end */
-+ alt_path[strlen(alt_path) - 4] = 0;
-+ strlcat(alt_path, ".", BRCMF_FW_NAME_LEN);
-+ strlcat(alt_path, fwctx->req->board_type, BRCMF_FW_NAME_LEN);
-+ strlcat(alt_path, ".txt", BRCMF_FW_NAME_LEN);
-+
-+ ret = request_firmware(fw, alt_path, fwctx->dev);
-+ if (ret == 0)
-+ return ret;
-+ }
-+
-+ return request_firmware(fw, cur->path, fwctx->dev);
-+}
-+
- static void brcmf_fw_request_done(const struct firmware *fw, void *ctx)
- {
- struct brcmf_fw *fwctx = ctx;
-@@ -544,7 +569,7 @@ static void brcmf_fw_request_done(const
-
- while (ret == 0 && ++fwctx->curpos < fwctx->req->n_items) {
- cur = &fwctx->req->items[fwctx->curpos];
-- request_firmware(&fw, cur->path, fwctx->dev);
-+ brcmf_fw_request_firmware(&fw, fwctx);
- ret = brcmf_fw_complete_request(fw, ctx);
- }
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h
-@@ -70,6 +70,7 @@ struct brcmf_fw_request {
- u16 domain_nr;
- u16 bus_nr;
- u32 n_items;
-+ const char *board_type;
- struct brcmf_fw_item items[0];
- };
-
diff --git a/package/kernel/mac80211/patches/brcm/320-v5.0-0004-brcmfmac-Set-board_type-used-for-nvram-file-selectio.patch b/package/kernel/mac80211/patches/brcm/320-v5.0-0004-brcmfmac-Set-board_type-used-for-nvram-file-selectio.patch
deleted file mode 100644
index a33ceaa21e..0000000000
--- a/package/kernel/mac80211/patches/brcm/320-v5.0-0004-brcmfmac-Set-board_type-used-for-nvram-file-selectio.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 0ad4b55b2f29784f93875e6231bf57cd233624a2 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 10 Oct 2018 13:01:01 +0200
-Subject: [PATCH] brcmfmac: Set board_type used for nvram file selection to
- machine-compatible
-
-For of/devicetree using machines, set the board_type used for nvram file
-selection to the first string listed in the top-level's node compatible
-string, aka the machine-compatible as used by of_machine_is_compatible().
-
-The board_type setting is used to load the board-specific nvram file with
-a board-specific name so that we can ship files for each supported board
-in linux-firmware.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h | 1 +
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c | 11 ++++++++++-
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 1 +
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 +
- 4 files changed, 13 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
-@@ -59,6 +59,7 @@ struct brcmf_mp_device {
- bool iapp;
- bool ignore_probe_fail;
- struct brcmfmac_pd_cc *country_codes;
-+ const char *board_type;
- union {
- struct brcmfmac_sdio_pd sdio;
- } bus;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
-@@ -27,11 +27,20 @@ void brcmf_of_probe(struct device *dev,
- struct brcmf_mp_device *settings)
- {
- struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
-- struct device_node *np = dev->of_node;
-+ struct device_node *root, *np = dev->of_node;
-+ struct property *prop;
- int irq;
- u32 irqf;
- u32 val;
-
-+ /* Set board-type to the first string of the machine compatible prop */
-+ root = of_find_node_by_path("/");
-+ if (root) {
-+ prop = of_find_property(root, "compatible", NULL);
-+ settings->board_type = of_prop_next_string(prop, NULL);
-+ of_node_put(root);
-+ }
-+
- if (!np || bus_type != BRCMF_BUSTYPE_SDIO ||
- !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
- return;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -1785,6 +1785,7 @@ brcmf_pcie_prepare_fw_request(struct brc
- fwreq->items[BRCMF_PCIE_FW_CODE].type = BRCMF_FW_TYPE_BINARY;
- fwreq->items[BRCMF_PCIE_FW_NVRAM].type = BRCMF_FW_TYPE_NVRAM;
- fwreq->items[BRCMF_PCIE_FW_NVRAM].flags = BRCMF_FW_REQF_OPTIONAL;
-+ fwreq->board_type = devinfo->settings->board_type;
- /* NVRAM reserves PCI domain 0 for Broadcom's SDK faked bus */
- fwreq->domain_nr = pci_domain_nr(devinfo->pdev->bus) + 1;
- fwreq->bus_nr = devinfo->pdev->bus->number;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -4174,6 +4174,7 @@ brcmf_sdio_prepare_fw_request(struct brc
-
- fwreq->items[BRCMF_SDIO_FW_CODE].type = BRCMF_FW_TYPE_BINARY;
- fwreq->items[BRCMF_SDIO_FW_NVRAM].type = BRCMF_FW_TYPE_NVRAM;
-+ fwreq->board_type = bus->sdiodev->settings->board_type;
-
- return fwreq;
- }
diff --git a/package/kernel/mac80211/patches/brcm/320-v5.0-0005-brcmfmac-Set-board_type-from-DMI-on-x86-based-machin.patch b/package/kernel/mac80211/patches/brcm/320-v5.0-0005-brcmfmac-Set-board_type-from-DMI-on-x86-based-machin.patch
deleted file mode 100644
index 25426e3f10..0000000000
--- a/package/kernel/mac80211/patches/brcm/320-v5.0-0005-brcmfmac-Set-board_type-from-DMI-on-x86-based-machin.patch
+++ /dev/null
@@ -1,179 +0,0 @@
-From bd1e82bb420adf4ad7cd468d8a482cde622dd69d Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 10 Oct 2018 13:01:02 +0200
-Subject: [PATCH] brcmfmac: Set board_type from DMI on x86 based machines
-
-For x86 based machines, set the board_type used for nvram file selection
-based on the DMI sys-vendor and product-name strings.
-
-Since on some models these strings are too generic, this commit also adds
-a quirk table overriding the strings for models listed in that table.
-
-The board_type setting is used to load the board-specific nvram file with
-a board-specific name so that we can ship files for each supported board
-in linux-firmware.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/Makefile | 2 +
- .../wireless/broadcom/brcm80211/brcmfmac/common.c | 3 +-
- .../wireless/broadcom/brcm80211/brcmfmac/common.h | 7 ++
- .../net/wireless/broadcom/brcm80211/brcmfmac/dmi.c | 116 +++++++++++++++++++++
- 4 files changed, 127 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
-@@ -54,3 +54,5 @@ brcmfmac-$(CPTCFG_BRCM_TRACING) += \
- tracepoint.o
- brcmfmac-$(CONFIG_OF) += \
- of.o
-+brcmfmac-$(CONFIG_DMI) += \
-+ dmi.o
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-@@ -448,8 +448,9 @@ struct brcmf_mp_device *brcmf_get_module
- }
- }
- if (!found) {
-- /* No platform data for this device, try OF (Open Firwmare) */
-+ /* No platform data for this device, try OF and DMI data */
- brcmf_of_probe(dev, bus_type, settings);
-+ brcmf_dmi_probe(settings, chip, chiprev);
- }
- return settings;
- }
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
-@@ -75,4 +75,11 @@ void brcmf_release_module_param(struct b
- /* Sets dongle media info (drv_version, mac address). */
- int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
-
-+#ifdef CONFIG_DMI
-+void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev);
-+#else
-+static inline void
-+brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev) {}
-+#endif
-+
- #endif /* BRCMFMAC_COMMON_H */
---- /dev/null
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
-@@ -0,0 +1,116 @@
-+/*
-+ * Copyright 2018 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
-+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
-+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/dmi.h>
-+#include <linux/mod_devicetable.h>
-+#include "core.h"
-+#include "common.h"
-+#include "brcm_hw_ids.h"
-+
-+/* The DMI data never changes so we can use a static buf for this */
-+static char dmi_board_type[128];
-+
-+struct brcmf_dmi_data {
-+ u32 chip;
-+ u32 chiprev;
-+ const char *board_type;
-+};
-+
-+/* NOTE: Please keep all entries sorted alphabetically */
-+
-+static const struct brcmf_dmi_data gpd_win_pocket_data = {
-+ BRCM_CC_4356_CHIP_ID, 2, "gpd-win-pocket"
-+};
-+
-+static const struct brcmf_dmi_data jumper_ezpad_mini3_data = {
-+ BRCM_CC_43430_CHIP_ID, 0, "jumper-ezpad-mini3"
-+};
-+
-+static const struct brcmf_dmi_data meegopad_t08_data = {
-+ BRCM_CC_43340_CHIP_ID, 2, "meegopad-t08"
-+};
-+
-+static const struct dmi_system_id dmi_platform_data[] = {
-+ {
-+ /* Match for the GPDwin which unfortunately uses somewhat
-+ * generic dmi strings, which is why we test for 4 strings.
-+ * Comparing against 23 other byt/cht boards, board_vendor
-+ * and board_name are unique to the GPDwin, where as only one
-+ * other board has the same board_serial and 3 others have
-+ * the same default product_name. Also the GPDwin is the
-+ * only device to have both board_ and product_name not set.
-+ */
-+ .matches = {
-+ DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
-+ DMI_MATCH(DMI_BOARD_NAME, "Default string"),
-+ DMI_MATCH(DMI_BOARD_SERIAL, "Default string"),
-+ DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
-+ },
-+ .driver_data = (void *)&gpd_win_pocket_data,
-+ },
-+ {
-+ /* Jumper EZpad mini3 */
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
-+ DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"),
-+ /* jumperx.T87.KFBNEEA02 with the version-nr dropped */
-+ DMI_MATCH(DMI_BIOS_VERSION, "jumperx.T87.KFBNEEA"),
-+ },
-+ .driver_data = (void *)&jumper_ezpad_mini3_data,
-+ },
-+ {
-+ /* Meegopad T08 */
-+ .matches = {
-+ DMI_MATCH(DMI_SYS_VENDOR, "Default string"),
-+ DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
-+ DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
-+ DMI_MATCH(DMI_BOARD_VERSION, "V1.1"),
-+ },
-+ .driver_data = (void *)&meegopad_t08_data,
-+ },
-+ {}
-+};
-+
-+void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev)
-+{
-+ const struct dmi_system_id *match;
-+ const struct brcmf_dmi_data *data;
-+ const char *sys_vendor;
-+ const char *product_name;
-+
-+ /* Some models have DMI strings which are too generic, e.g.
-+ * "Default string", we use a quirk table for these.
-+ */
-+ for (match = dmi_first_match(dmi_platform_data);
-+ match;
-+ match = dmi_first_match(match + 1)) {
-+ data = match->driver_data;
-+
-+ if (data->chip == chip && data->chiprev == chiprev) {
-+ settings->board_type = data->board_type;
-+ return;
-+ }
-+ }
-+
-+ /* Not found in the quirk-table, use sys_vendor-product_name */
-+ sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
-+ product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
-+ if (sys_vendor && product_name) {
-+ snprintf(dmi_board_type, sizeof(dmi_board_type), "%s-%s",
-+ sys_vendor, product_name);
-+ settings->board_type = dmi_board_type;
-+ }
-+}
diff --git a/package/kernel/mac80211/patches/brcm/320-v5.0-0006-brcmfmac-Cleanup-brcmf_fw_request_done.patch b/package/kernel/mac80211/patches/brcm/320-v5.0-0006-brcmfmac-Cleanup-brcmf_fw_request_done.patch
deleted file mode 100644
index 211e9e4a9f..0000000000
--- a/package/kernel/mac80211/patches/brcm/320-v5.0-0006-brcmfmac-Cleanup-brcmf_fw_request_done.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 55e491edbf14b2da5419c2a319ea3b1d6368d9a2 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 10 Oct 2018 13:01:03 +0200
-Subject: [PATCH] brcmfmac: Cleanup brcmf_fw_request_done()
-
-The "cur" variable is now only used for a debug print and we already
-print the same info from brcmf_fw_complete_request(), so the debug print
-does not provide any extra info and we can remove it.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 8 +-------
- 1 file changed, 1 insertion(+), 7 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -560,22 +560,16 @@ static int brcmf_fw_request_firmware(con
- static void brcmf_fw_request_done(const struct firmware *fw, void *ctx)
- {
- struct brcmf_fw *fwctx = ctx;
-- struct brcmf_fw_item *cur;
-- int ret = 0;
--
-- cur = &fwctx->req->items[fwctx->curpos];
-+ int ret;
-
- ret = brcmf_fw_complete_request(fw, fwctx);
-
- while (ret == 0 && ++fwctx->curpos < fwctx->req->n_items) {
-- cur = &fwctx->req->items[fwctx->curpos];
- brcmf_fw_request_firmware(&fw, fwctx);
- ret = brcmf_fw_complete_request(fw, ctx);
- }
-
- if (ret) {
-- brcmf_dbg(TRACE, "failed err=%d: dev=%s, fw=%s\n", ret,
-- dev_name(fwctx->dev), cur->path);
- brcmf_fw_free_request(fwctx->req);
- fwctx->req = NULL;
- }
diff --git a/package/kernel/mac80211/patches/brcm/321-v5.0-0001-brcmfmac-Add-support-for-getting-nvram-contents-from.patch b/package/kernel/mac80211/patches/brcm/321-v5.0-0001-brcmfmac-Add-support-for-getting-nvram-contents-from.patch
deleted file mode 100644
index 88e5c67735..0000000000
--- a/package/kernel/mac80211/patches/brcm/321-v5.0-0001-brcmfmac-Add-support-for-getting-nvram-contents-from.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From ce2e6db554fad444fa0b3904fc3015336e0ef765 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Thu, 11 Oct 2018 11:51:06 +0200
-Subject: [PATCH] brcmfmac: Add support for getting nvram contents from EFI
- variables
-
-Various X86 laptops with a SDIO attached brcmfmac wifi chip, store the
-nvram contents in a special EFI variable. This commit adds support for
-getting nvram directly from this EFI variable, without the user needing
-to manually copy it.
-
-This makes Wifi / Bluetooth work out of the box on these devices instead of
-requiring manual setup.
-
-This has been tested on the following models: Acer Iconia Tab8 w1-810,
-Acer One 10, Asus T100CHI, Asus T100HA, Asus T100TA, Asus T200TA and a
-Lenovo Mixx 2 8.
-
-Tested-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/firmware.c | 63 +++++++++++++++++++---
- 1 file changed, 57 insertions(+), 6 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -14,6 +14,7 @@
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-+#include <linux/efi.h>
- #include <linux/kernel.h>
- #include <linux/slab.h>
- #include <linux/device.h>
-@@ -445,6 +446,51 @@ struct brcmf_fw {
-
- static void brcmf_fw_request_done(const struct firmware *fw, void *ctx);
-
-+#ifdef CONFIG_EFI
-+static u8 *brcmf_fw_nvram_from_efi(size_t *data_len_ret)
-+{
-+ const u16 name[] = { 'n', 'v', 'r', 'a', 'm', 0 };
-+ struct efivar_entry *nvram_efivar;
-+ unsigned long data_len = 0;
-+ u8 *data = NULL;
-+ int err;
-+
-+ nvram_efivar = kzalloc(sizeof(*nvram_efivar), GFP_KERNEL);
-+ if (!nvram_efivar)
-+ return NULL;
-+
-+ memcpy(&nvram_efivar->var.VariableName, name, sizeof(name));
-+ nvram_efivar->var.VendorGuid = EFI_GUID(0x74b00bd9, 0x805a, 0x4d61,
-+ 0xb5, 0x1f, 0x43, 0x26,
-+ 0x81, 0x23, 0xd1, 0x13);
-+
-+ err = efivar_entry_size(nvram_efivar, &data_len);
-+ if (err)
-+ goto fail;
-+
-+ data = kmalloc(data_len, GFP_KERNEL);
-+ if (!data)
-+ goto fail;
-+
-+ err = efivar_entry_get(nvram_efivar, NULL, &data_len, data);
-+ if (err)
-+ goto fail;
-+
-+ brcmf_info("Using nvram EFI variable\n");
-+
-+ kfree(nvram_efivar);
-+ *data_len_ret = data_len;
-+ return data;
-+
-+fail:
-+ kfree(data);
-+ kfree(nvram_efivar);
-+ return NULL;
-+}
-+#else
-+static u8 *brcmf_fw_nvram_from_efi(size_t *data_len) { return NULL; }
-+#endif
-+
- static void brcmf_fw_free_request(struct brcmf_fw_request *req)
- {
- struct brcmf_fw_item *item;
-@@ -463,11 +509,12 @@ static int brcmf_fw_request_nvram_done(c
- {
- struct brcmf_fw *fwctx = ctx;
- struct brcmf_fw_item *cur;
-+ bool free_bcm47xx_nvram = false;
-+ bool kfree_nvram = false;
- u32 nvram_length = 0;
- void *nvram = NULL;
- u8 *data = NULL;
- size_t data_len;
-- bool raw_nvram;
-
- brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(fwctx->dev));
-
-@@ -476,12 +523,13 @@ static int brcmf_fw_request_nvram_done(c
- if (fw && fw->data) {
- data = (u8 *)fw->data;
- data_len = fw->size;
-- raw_nvram = false;
- } else {
-- data = bcm47xx_nvram_get_contents(&data_len);
-- if (!data && !(cur->flags & BRCMF_FW_REQF_OPTIONAL))
-+ if ((data = bcm47xx_nvram_get_contents(&data_len)))
-+ free_bcm47xx_nvram = true;
-+ else if ((data = brcmf_fw_nvram_from_efi(&data_len)))
-+ kfree_nvram = true;
-+ else if (!(cur->flags & BRCMF_FW_REQF_OPTIONAL))
- goto fail;
-- raw_nvram = true;
- }
-
- if (data)
-@@ -489,8 +537,11 @@ static int brcmf_fw_request_nvram_done(c
- fwctx->req->domain_nr,
- fwctx->req->bus_nr);
-
-- if (raw_nvram)
-+ if (free_bcm47xx_nvram)
- bcm47xx_nvram_release_contents(data);
-+ if (kfree_nvram)
-+ kfree(data);
-+
- release_firmware(fw);
- if (!nvram && !(cur->flags & BRCMF_FW_REQF_OPTIONAL))
- goto fail;
diff --git a/package/kernel/mac80211/patches/brcm/321-v5.0-0002-brcmfmac-Fix-ccode-from-EFI-nvram-when-necessary.patch b/package/kernel/mac80211/patches/brcm/321-v5.0-0002-brcmfmac-Fix-ccode-from-EFI-nvram-when-necessary.patch
deleted file mode 100644
index c2fd620d6c..0000000000
--- a/package/kernel/mac80211/patches/brcm/321-v5.0-0002-brcmfmac-Fix-ccode-from-EFI-nvram-when-necessary.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 29ec3394f0bd85c22674ab6693d92da5e2324610 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Thu, 11 Oct 2018 11:51:07 +0200
-Subject: [PATCH] brcmfmac: Fix ccode from EFI nvram when necessary
-
-In some cases the EFI-var stored nvram contains "ccode=ALL" or "ccode=XV"
-to specify "worldwide" compatible settings, but these 2 ccode-s do not work
-properly.
-
-I've tested the different known "worldwide" ccode-s used in various nvram
-sources with the latest firmwares from linux-firmware for various brcmfmac
-models, here is a simplified (*) table with what each setting results in:
-
-ALL: 12-14 disab, U-NII-1, U-NII-2 no-IR/radar, U-NII-3
-XV: 12-14 no-IR, disables all 5G channels
-XY: 12-13 enab, 14 disab, U-NII-1 enab, U-NII-2 no-IR/radar, U-NII-3 disab
-X2: 12-13 no-IR, 14 dis, U-NII-1 no-IR, U-NII-2 no-IR/radar, U-NII-3 no-IR
-
-Where 12,13,14 are 2.4G channels 12-14 and U-NII-1/2/3 are the 3 different
-5G channel groups. no-IR is no-Initiate-Radiation, we will never send on
-these channels without first having received valid wifi traffic there.
-
-This immediately shows that both ALL and XV are not as worldwide as we want
-them to be. ALL causes channels 12 and 13 to not be available and XV causes
-all 5GHz channels to not be available. Also ALL unconditionally enables the
-U-NII-1 and U-NII-3 5G groups, while we really should be using no-IR for
-these.
-
-This commit replace XV and ALL with X2, which allows usage of chan 12-13
-and 5G channels, but only after receiving valid wifi traffic there first.
-
-Note that this configure the firmware's channel limits, the kernels own
-regulatory restrictions based on e.g. regulatory info received from the
-access-point, will be applied on top of this.
-
-This fixes channels 12+13 not working on the Asus T200TA and the Lenovo
-Mixx 2 8 and 5G channels not working on the Asus T100HA.
-
-This has been tested on the following models: Acer Iconia Tab8 w1-810,
-Acer One 10, Asus T100CHI, Asus T100HA, Asus T100TA, Asus T200TA and a
-Lenovo Mixx 2 8.
-
-*) There are some exceptions to this table:
-1) On really old firmware e.g. linux-firmware's 2011 brcmfmac4330-sdio.bin
- ALL really means all, unconditionally enabling everything
-2) The exact meaning might be influenced by setting the regrev nvram var.
- Specifically using ccode=XV + regrev=1 on brcmfmac43241b4 leads to:
- 12-14 no-ir, U-NII-1 no-ir, U-NII-2 no-ir/radar, U-NII-3 no-ir
- But only on the brcmfmac43241b4 and not on e.g. the brcmfmac43340
-
-Tested-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/firmware.c | 24 ++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -447,6 +447,29 @@ struct brcmf_fw {
- static void brcmf_fw_request_done(const struct firmware *fw, void *ctx);
-
- #ifdef CONFIG_EFI
-+/* In some cases the EFI-var stored nvram contains "ccode=ALL" or "ccode=XV"
-+ * to specify "worldwide" compatible settings, but these 2 ccode-s do not work
-+ * properly. "ccode=ALL" causes channels 12 and 13 to not be available,
-+ * "ccode=XV" causes all 5GHz channels to not be available. So we replace both
-+ * with "ccode=X2" which allows channels 12+13 and 5Ghz channels in
-+ * no-Initiate-Radiation mode. This means that we will never send on these
-+ * channels without first having received valid wifi traffic on the channel.
-+ */
-+static void brcmf_fw_fix_efi_nvram_ccode(char *data, unsigned long data_len)
-+{
-+ char *ccode;
-+
-+ ccode = strnstr((char *)data, "ccode=ALL", data_len);
-+ if (!ccode)
-+ ccode = strnstr((char *)data, "ccode=XV\r", data_len);
-+ if (!ccode)
-+ return;
-+
-+ ccode[6] = 'X';
-+ ccode[7] = '2';
-+ ccode[8] = '\r';
-+}
-+
- static u8 *brcmf_fw_nvram_from_efi(size_t *data_len_ret)
- {
- const u16 name[] = { 'n', 'v', 'r', 'a', 'm', 0 };
-@@ -476,6 +499,7 @@ static u8 *brcmf_fw_nvram_from_efi(size_
- if (err)
- goto fail;
-
-+ brcmf_fw_fix_efi_nvram_ccode(data, data_len);
- brcmf_info("Using nvram EFI variable\n");
-
- kfree(nvram_efivar);
diff --git a/package/kernel/mac80211/patches/brcm/322-v5.0-0001-brcmfmac-fix-spelling-mistake-Retreiving-Retrieving.patch b/package/kernel/mac80211/patches/brcm/322-v5.0-0001-brcmfmac-fix-spelling-mistake-Retreiving-Retrieving.patch
deleted file mode 100644
index c1aea25cba..0000000000
--- a/package/kernel/mac80211/patches/brcm/322-v5.0-0001-brcmfmac-fix-spelling-mistake-Retreiving-Retrieving.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From e966a79c2f761a696dec9cfb0e2d4aa977bf78cb Mon Sep 17 00:00:00 2001
-From: Colin Ian King <colin.king@canonical.com>
-Date: Tue, 16 Oct 2018 18:43:42 +0100
-Subject: [PATCH] brcmfmac: fix spelling mistake "Retreiving" -> "Retrieving"
-
-Trivial fix to spelling mistake in brcmf_err error message.
-
-Signed-off-by: Colin Ian King <colin.king@canonical.com>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-@@ -214,7 +214,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
- sizeof(ifp->mac_addr));
- if (err < 0) {
-- brcmf_err("Retreiving cur_etheraddr failed, %d\n", err);
-+ brcmf_err("Retrieving cur_etheraddr failed, %d\n", err);
- goto done;
- }
- memcpy(ifp->drvr->wiphy->perm_addr, ifp->drvr->mac, ETH_ALEN);
-@@ -269,7 +269,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- strcpy(buf, "ver");
- err = brcmf_fil_iovar_data_get(ifp, "ver", buf, sizeof(buf));
- if (err < 0) {
-- brcmf_err("Retreiving version information failed, %d\n",
-+ brcmf_err("Retrieving version information failed, %d\n",
- err);
- goto done;
- }
diff --git a/package/kernel/mac80211/patches/brcm/323-v5.0-0001-brcmutil-print-invalid-chanspec-when-WARN-ing.patch b/package/kernel/mac80211/patches/brcm/323-v5.0-0001-brcmutil-print-invalid-chanspec-when-WARN-ing.patch
deleted file mode 100644
index 566336cbc3..0000000000
--- a/package/kernel/mac80211/patches/brcm/323-v5.0-0001-brcmutil-print-invalid-chanspec-when-WARN-ing.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From ae5848cb4511bbbfe0306fcdbe5d9a95cd9546a9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 26 Oct 2018 13:22:32 +0200
-Subject: [PATCH] brcmutil: print invalid chanspec when WARN-ing
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On one of my devices I got WARNINGs when brcmfmac tried to decode
-chanspec. I couldn't tell if it was some unsupported format or just a
-malformed value passed by a firmware.
-
-Print chanspec value so it's possible to debug a possible problem.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c | 14 +++++++-------
- 1 file changed, 7 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
-@@ -128,7 +128,7 @@ static void brcmu_d11n_decchspec(struct
- }
- break;
- default:
-- WARN_ON_ONCE(1);
-+ WARN_ONCE(1, "Invalid chanspec 0x%04x\n", ch->chspec);
- break;
- }
-
-@@ -140,7 +140,7 @@ static void brcmu_d11n_decchspec(struct
- ch->band = BRCMU_CHAN_BAND_2G;
- break;
- default:
-- WARN_ON_ONCE(1);
-+ WARN_ONCE(1, "Invalid chanspec 0x%04x\n", ch->chspec);
- break;
- }
- }
-@@ -167,7 +167,7 @@ static void brcmu_d11ac_decchspec(struct
- ch->sb = BRCMU_CHAN_SB_U;
- ch->control_ch_num += CH_10MHZ_APART;
- } else {
-- WARN_ON_ONCE(1);
-+ WARN_ONCE(1, "Invalid chanspec 0x%04x\n", ch->chspec);
- }
- break;
- case BRCMU_CHSPEC_D11AC_BW_80:
-@@ -188,7 +188,7 @@ static void brcmu_d11ac_decchspec(struct
- ch->control_ch_num += CH_30MHZ_APART;
- break;
- default:
-- WARN_ON_ONCE(1);
-+ WARN_ONCE(1, "Invalid chanspec 0x%04x\n", ch->chspec);
- break;
- }
- break;
-@@ -222,13 +222,13 @@ static void brcmu_d11ac_decchspec(struct
- ch->control_ch_num += CH_70MHZ_APART;
- break;
- default:
-- WARN_ON_ONCE(1);
-+ WARN_ONCE(1, "Invalid chanspec 0x%04x\n", ch->chspec);
- break;
- }
- break;
- case BRCMU_CHSPEC_D11AC_BW_8080:
- default:
-- WARN_ON_ONCE(1);
-+ WARN_ONCE(1, "Invalid chanspec 0x%04x\n", ch->chspec);
- break;
- }
-
-@@ -240,7 +240,7 @@ static void brcmu_d11ac_decchspec(struct
- ch->band = BRCMU_CHAN_BAND_2G;
- break;
- default:
-- WARN_ON_ONCE(1);
-+ WARN_ONCE(1, "Invalid chanspec 0x%04x\n", ch->chspec);
- break;
- }
- }
diff --git a/package/kernel/mac80211/patches/brcm/325-v5.0-brcmfmac-support-STA-info-struct-v7.patch b/package/kernel/mac80211/patches/brcm/325-v5.0-brcmfmac-support-STA-info-struct-v7.patch
deleted file mode 100644
index 8ff42462b0..0000000000
--- a/package/kernel/mac80211/patches/brcm/325-v5.0-brcmfmac-support-STA-info-struct-v7.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 4282ff17e557d319e1b988fa4f582792cfaf6fff Mon Sep 17 00:00:00 2001
-From: Dan Haab <riproute@gmail.com>
-Date: Fri, 9 Nov 2018 09:38:55 -0700
-Subject: [PATCH] brcmfmac: support STA info struct v7
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The newest firmwares provide STA info using v7 of the struct. As v7
-isn't backward compatible, a union is needed.
-
-Even though brcmfmac does not use any of the new info it's important to
-provide the proper struct buffer. Without this change new firmwares will
-fallback to the very limited v3 instead of something in between such as
-v4.
-
-Signed-off-by: Dan Haab <dan.haab@luxul.com>
-Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/fwil_types.h | 40 +++++++++++++++----
- 1 file changed, 33 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
-@@ -176,6 +176,8 @@
-
- #define BRCMF_VHT_CAP_MCS_MAP_NSS_MAX 8
-
-+#define BRCMF_HE_CAP_MCS_MAP_NSS_MAX 8
-+
- /* MAX_CHUNK_LEN is the maximum length for data passing to firmware in each
- * ioctl. It is relatively small because firmware has small maximum size input
- * playload restriction for ioctls.
-@@ -601,13 +603,37 @@ struct brcmf_sta_info_le {
- __le32 rx_pkts_retried; /* # rx with retry bit set */
- __le32 tx_rate_fallback; /* lowest fallback TX rate */
-
-- /* Fields valid for ver >= 5 */
-- struct {
-- __le32 count; /* # rates in this set */
-- u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units w/hi bit set if basic */
-- u8 mcs[BRCMF_MCSSET_LEN]; /* supported mcs index bit map */
-- __le16 vht_mcs[BRCMF_VHT_CAP_MCS_MAP_NSS_MAX]; /* supported mcs index bit map per nss */
-- } rateset_adv;
-+ union {
-+ struct {
-+ struct {
-+ __le32 count; /* # rates in this set */
-+ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units w/hi bit set if basic */
-+ u8 mcs[BRCMF_MCSSET_LEN]; /* supported mcs index bit map */
-+ __le16 vht_mcs[BRCMF_VHT_CAP_MCS_MAP_NSS_MAX]; /* supported mcs index bit map per nss */
-+ } rateset_adv;
-+ } v5;
-+
-+ struct {
-+ __le32 rx_dur_total; /* total user RX duration (estimated) */
-+ __le16 chanspec; /** chanspec this sta is on */
-+ __le16 pad_1;
-+ struct {
-+ __le16 version; /* version */
-+ __le16 len; /* length */
-+ __le32 count; /* # rates in this set */
-+ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units w/hi bit set if basic */
-+ u8 mcs[BRCMF_MCSSET_LEN]; /* supported mcs index bit map */
-+ __le16 vht_mcs[BRCMF_VHT_CAP_MCS_MAP_NSS_MAX]; /* supported mcs index bit map per nss */
-+ __le16 he_mcs[BRCMF_HE_CAP_MCS_MAP_NSS_MAX]; /* supported he mcs index bit map per nss */
-+ } rateset_adv; /* rateset along with mcs index bitmap */
-+ __le16 wpauth; /* authentication type */
-+ u8 algo; /* crypto algorithm */
-+ u8 pad_2;
-+ __le32 tx_rspec; /* Rate of last successful tx frame */
-+ __le32 rx_rspec; /* Rate of last successful rx frame */
-+ __le32 wnm_cap; /* wnm capabilities */
-+ } v7;
-+ };
- };
-
- struct brcmf_chanspec_list {
diff --git a/package/kernel/mac80211/patches/brcm/326-v5.0-brcmfmac-Call-brcmf_dmi_probe-before-brcmf_of_probe.patch b/package/kernel/mac80211/patches/brcm/326-v5.0-brcmfmac-Call-brcmf_dmi_probe-before-brcmf_of_probe.patch
deleted file mode 100644
index 01621561c1..0000000000
--- a/package/kernel/mac80211/patches/brcm/326-v5.0-brcmfmac-Call-brcmf_dmi_probe-before-brcmf_of_probe.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 554da3868eb1d7174710c18b4ddd6ff01f6d612c Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 23 Nov 2018 10:11:48 +0100
-Subject: [PATCH] brcmfmac: Call brcmf_dmi_probe before brcmf_of_probe
-
-ARM systems with UEFI may have both devicetree (of) and DMI data in this
-case we end up setting brcmf_mp_device.board_type twice.
-
-In this case we should prefer the devicetree data, because:
-1) The devicerree data is more reliable
-2) Some ARM systems (e.g. the Raspberry Pi 3 models) support both UEFI and
- classic uboot booting, the devicetree data is always there, so using it
- makes sure we ask for the same nvram file independent of how we booted.
-
-This commit moves the brcmf_dmi_probe call to before the brcmf_of_probe
-call, so that the latter can override the value of the first if both are
-set.
-
-Fixes: bd1e82bb420a ("brcmfmac: Set board_type from DMI on x86 based ...")
-Cc: Peter Robinson <pbrobinson@gmail.com>
-Tested-and-reported-by: Peter Robinson <pbrobinson@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-@@ -449,8 +449,8 @@ struct brcmf_mp_device *brcmf_get_module
- }
- if (!found) {
- /* No platform data for this device, try OF and DMI data */
-- brcmf_of_probe(dev, bus_type, settings);
- brcmf_dmi_probe(settings, chip, chiprev);
-+ brcmf_of_probe(dev, bus_type, settings);
- }
- return settings;
- }
diff --git a/package/kernel/mac80211/patches/brcm/328-v5.0-0001-brcmfmac-add-credit-numbers-updating-support.patch b/package/kernel/mac80211/patches/brcm/328-v5.0-0001-brcmfmac-add-credit-numbers-updating-support.patch
deleted file mode 100644
index dd40ee2b1f..0000000000
--- a/package/kernel/mac80211/patches/brcm/328-v5.0-0001-brcmfmac-add-credit-numbers-updating-support.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 153e22c0ff1260035cd7fe72c8aeead1f5fac757 Mon Sep 17 00:00:00 2001
-From: Wright Feng <Wright.Feng@cypress.com>
-Date: Mon, 5 Nov 2018 05:51:54 +0000
-Subject: [PATCH] brcmfmac: add credit numbers updating support
-
-The credit numbers are static and tunable per chip in firmware side.
-However the credit number may be changed that is based on packet pool
-length and will send BRCMF_E_FIFO_CREDIT_MAP event to notify host driver
-updates the credit numbers during interface up.
-The purpose of this patch is making host driver has ability of updating
-the credit numbers when receiving the BRCMF_E_FIFO_CREDIT_MAP event.
-
-Signed-off-by: Wright Feng <wright.feng@cypress.com>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/fwsignal.c | 23 ++++++++++++-------
- 1 file changed, 15 insertions(+), 8 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
-@@ -511,6 +511,7 @@ struct brcmf_fws_info {
- struct work_struct fws_dequeue_work;
- u32 fifo_enqpkt[BRCMF_FWS_FIFO_COUNT];
- int fifo_credit[BRCMF_FWS_FIFO_COUNT];
-+ int init_fifo_credit[BRCMF_FWS_FIFO_COUNT];
- int credits_borrowed[BRCMF_FWS_FIFO_AC_VO + 1];
- int deq_node_pos[BRCMF_FWS_FIFO_COUNT];
- u32 fifo_credit_map;
-@@ -1237,6 +1238,9 @@ static void brcmf_fws_return_credits(str
- }
-
- fws->fifo_credit[fifo] += credits;
-+ if (fws->fifo_credit[fifo] > fws->init_fifo_credit[fifo])
-+ fws->fifo_credit[fifo] = fws->init_fifo_credit[fifo];
-+
- }
-
- static void brcmf_fws_schedule_deq(struct brcmf_fws_info *fws)
-@@ -1595,19 +1599,21 @@ static int brcmf_fws_notify_credit_map(s
- brcmf_err("event payload too small (%d)\n", e->datalen);
- return -EINVAL;
- }
-- if (fws->creditmap_received)
-- return 0;
-
- fws->creditmap_received = true;
-
- brcmf_dbg(TRACE, "enter: credits %pM\n", credits);
- brcmf_fws_lock(fws);
- for (i = 0; i < ARRAY_SIZE(fws->fifo_credit); i++) {
-- if (*credits)
-+ fws->fifo_credit[i] += credits[i] - fws->init_fifo_credit[i];
-+ fws->init_fifo_credit[i] = credits[i];
-+ if (fws->fifo_credit[i] > 0)
- fws->fifo_credit_map |= 1 << i;
- else
- fws->fifo_credit_map &= ~(1 << i);
-- fws->fifo_credit[i] = *credits++;
-+ WARN_ONCE(fws->fifo_credit[i] < 0,
-+ "fifo_credit[%d] is negative(%d)\n", i,
-+ fws->fifo_credit[i]);
- }
- brcmf_fws_schedule_deq(fws);
- brcmf_fws_unlock(fws);
-@@ -2013,7 +2019,7 @@ static int brcmf_fws_borrow_credit(struc
- }
-
- for (lender_ac = 0; lender_ac <= BRCMF_FWS_FIFO_AC_VO; lender_ac++) {
-- if (fws->fifo_credit[lender_ac]) {
-+ if (fws->fifo_credit[lender_ac] > 0) {
- fws->credits_borrowed[lender_ac]++;
- fws->fifo_credit[lender_ac]--;
- if (fws->fifo_credit[lender_ac] == 0)
-@@ -2210,8 +2216,9 @@ static void brcmf_fws_dequeue_worker(str
- }
- continue;
- }
-- while ((fws->fifo_credit[fifo]) || ((!fws->bcmc_credit_check) &&
-- (fifo == BRCMF_FWS_FIFO_BCMC))) {
-+ while ((fws->fifo_credit[fifo] > 0) ||
-+ ((!fws->bcmc_credit_check) &&
-+ (fifo == BRCMF_FWS_FIFO_BCMC))) {
- skb = brcmf_fws_deq(fws, fifo);
- if (!skb)
- break;
-@@ -2222,7 +2229,7 @@ static void brcmf_fws_dequeue_worker(str
- break;
- }
- if ((fifo == BRCMF_FWS_FIFO_AC_BE) &&
-- (fws->fifo_credit[fifo] == 0) &&
-+ (fws->fifo_credit[fifo] <= 0) &&
- (!fws->bus_flow_blocked)) {
- while (brcmf_fws_borrow_credit(fws) == 0) {
- skb = brcmf_fws_deq(fws, fifo);
diff --git a/package/kernel/mac80211/patches/brcm/328-v5.0-0002-brcmfmac-enable-frameburst-mode-in-default-firmware-.patch b/package/kernel/mac80211/patches/brcm/328-v5.0-0002-brcmfmac-enable-frameburst-mode-in-default-firmware-.patch
deleted file mode 100644
index 9602792d4f..0000000000
--- a/package/kernel/mac80211/patches/brcm/328-v5.0-0002-brcmfmac-enable-frameburst-mode-in-default-firmware-.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From a3bdc6deb60bf6be4405058ca49a686c4db08c39 Mon Sep 17 00:00:00 2001
-From: Wright Feng <Wright.Feng@cypress.com>
-Date: Mon, 5 Nov 2018 05:51:59 +0000
-Subject: [PATCH] brcmfmac: enable frameburst mode in default firmware setting
-
-The frameburst feature can enable per-packet framebursting in firmware
-side and get higher TX throughput in High Throughput(HT) mode. To enhance
-TX throughput, we enable frameburst mode in default firmware setting.
-
-Signed-off-by: Wright Feng <wright.feng@cypress.com>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 6 ++++++
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.h | 1 +
- 2 files changed, 7 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -6638,6 +6638,12 @@ static s32 brcmf_config_dongle(struct br
-
- brcmf_configure_arp_nd_offload(ifp, true);
-
-+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_FAKEFRAG, 1);
-+ if (err) {
-+ brcmf_err("failed to set frameburst mode\n");
-+ goto default_conf_out;
-+ }
-+
- cfg->dongle_up = true;
- default_conf_out:
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.h
-@@ -80,6 +80,7 @@
- #define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON 201
- #define BRCMF_C_SET_ASSOC_PREFER 205
- #define BRCMF_C_GET_VALID_CHANNELS 217
-+#define BRCMF_C_SET_FAKEFRAG 219
- #define BRCMF_C_GET_KEY_PRIMARY 235
- #define BRCMF_C_SET_KEY_PRIMARY 236
- #define BRCMF_C_SET_SCAN_PASSIVE_TIME 258
diff --git a/package/kernel/mac80211/patches/brcm/328-v5.0-0003-brcmfmac-handle-compressed-tx-status-signal.patch b/package/kernel/mac80211/patches/brcm/328-v5.0-0003-brcmfmac-handle-compressed-tx-status-signal.patch
deleted file mode 100644
index d44c8737ad..0000000000
--- a/package/kernel/mac80211/patches/brcm/328-v5.0-0003-brcmfmac-handle-compressed-tx-status-signal.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From e4af3ffb43d50f070134aa1b40d5c3573f57deb1 Mon Sep 17 00:00:00 2001
-From: Chung-Hsien Hsu <stanley.hsu@cypress.com>
-Date: Mon, 5 Nov 2018 05:52:05 +0000
-Subject: [PATCH] brcmfmac: handle compressed tx status signal
-
-Firmware inform the driver about tx status by normal tx status signal
-or compressed tx status signal. This patch adds support to handle the
-compressed tx status signal.
-
-Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Wright Feng <wright.feng@cypress.com>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/fwsignal.c | 121 ++++++++++--------
- 1 file changed, 71 insertions(+), 50 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
-@@ -1455,9 +1455,10 @@ static int brcmf_fws_txstatus_suppressed
-
- static int
- brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
-- u32 genbit, u16 seq)
-+ u32 genbit, u16 seq, u8 compcnt)
- {
- u32 fifo;
-+ u8 cnt = 0;
- int ret;
- bool remove_from_hanger = true;
- struct sk_buff *skb;
-@@ -1468,60 +1469,71 @@ brcmf_fws_txs_process(struct brcmf_fws_i
- brcmf_dbg(DATA, "flags %d\n", flags);
-
- if (flags == BRCMF_FWS_TXSTATUS_DISCARD)
-- fws->stats.txs_discard++;
-+ fws->stats.txs_discard += compcnt;
- else if (flags == BRCMF_FWS_TXSTATUS_CORE_SUPPRESS) {
-- fws->stats.txs_supp_core++;
-+ fws->stats.txs_supp_core += compcnt;
- remove_from_hanger = false;
- } else if (flags == BRCMF_FWS_TXSTATUS_FW_PS_SUPPRESS) {
-- fws->stats.txs_supp_ps++;
-+ fws->stats.txs_supp_ps += compcnt;
- remove_from_hanger = false;
- } else if (flags == BRCMF_FWS_TXSTATUS_FW_TOSSED)
-- fws->stats.txs_tossed++;
-+ fws->stats.txs_tossed += compcnt;
- else if (flags == BRCMF_FWS_TXSTATUS_HOST_TOSSED)
-- fws->stats.txs_host_tossed++;
-+ fws->stats.txs_host_tossed += compcnt;
- else
- brcmf_err("unexpected txstatus\n");
-
-- ret = brcmf_fws_hanger_poppkt(&fws->hanger, hslot, &skb,
-- remove_from_hanger);
-- if (ret != 0) {
-- brcmf_err("no packet in hanger slot: hslot=%d\n", hslot);
-- return ret;
-- }
-+ while (cnt < compcnt) {
-+ ret = brcmf_fws_hanger_poppkt(&fws->hanger, hslot, &skb,
-+ remove_from_hanger);
-+ if (ret != 0) {
-+ brcmf_err("no packet in hanger slot: hslot=%d\n",
-+ hslot);
-+ goto cont;
-+ }
-
-- skcb = brcmf_skbcb(skb);
-- entry = skcb->mac;
-- if (WARN_ON(!entry)) {
-- brcmu_pkt_buf_free_skb(skb);
-- return -EINVAL;
-- }
-- entry->transit_count--;
-- if (entry->suppressed && entry->suppr_transit_count)
-- entry->suppr_transit_count--;
--
-- brcmf_dbg(DATA, "%s flags %d htod %X seq %X\n", entry->name, flags,
-- skcb->htod, seq);
--
-- /* pick up the implicit credit from this packet */
-- fifo = brcmf_skb_htod_tag_get_field(skb, FIFO);
-- if ((fws->fcmode == BRCMF_FWS_FCMODE_IMPLIED_CREDIT) ||
-- (brcmf_skb_if_flags_get_field(skb, REQ_CREDIT)) ||
-- (flags == BRCMF_FWS_TXSTATUS_HOST_TOSSED)) {
-- brcmf_fws_return_credits(fws, fifo, 1);
-- brcmf_fws_schedule_deq(fws);
-- }
-- brcmf_fws_macdesc_return_req_credit(skb);
-+ skcb = brcmf_skbcb(skb);
-+ entry = skcb->mac;
-+ if (WARN_ON(!entry)) {
-+ brcmu_pkt_buf_free_skb(skb);
-+ goto cont;
-+ }
-+ entry->transit_count--;
-+ if (entry->suppressed && entry->suppr_transit_count)
-+ entry->suppr_transit_count--;
-
-- ret = brcmf_proto_hdrpull(fws->drvr, false, skb, &ifp);
-- if (ret) {
-- brcmu_pkt_buf_free_skb(skb);
-- return -EINVAL;
-+ brcmf_dbg(DATA, "%s flags %d htod %X seq %X\n", entry->name,
-+ flags, skcb->htod, seq);
-+
-+ /* pick up the implicit credit from this packet */
-+ fifo = brcmf_skb_htod_tag_get_field(skb, FIFO);
-+ if (fws->fcmode == BRCMF_FWS_FCMODE_IMPLIED_CREDIT ||
-+ (brcmf_skb_if_flags_get_field(skb, REQ_CREDIT)) ||
-+ flags == BRCMF_FWS_TXSTATUS_HOST_TOSSED) {
-+ brcmf_fws_return_credits(fws, fifo, 1);
-+ brcmf_fws_schedule_deq(fws);
-+ }
-+ brcmf_fws_macdesc_return_req_credit(skb);
-+
-+ ret = brcmf_proto_hdrpull(fws->drvr, false, skb, &ifp);
-+ if (ret) {
-+ brcmu_pkt_buf_free_skb(skb);
-+ goto cont;
-+ }
-+ if (!remove_from_hanger)
-+ ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb,
-+ genbit, seq);
-+ if (remove_from_hanger || ret)
-+ brcmf_txfinalize(ifp, skb, true);
-+
-+cont:
-+ hslot = (hslot + 1) & (BRCMF_FWS_TXSTAT_HSLOT_MASK >>
-+ BRCMF_FWS_TXSTAT_HSLOT_SHIFT);
-+ if (BRCMF_FWS_MODE_GET_REUSESEQ(fws->mode))
-+ seq = (seq + 1) & BRCMF_SKB_HTOD_SEQ_NR_MASK;
-+
-+ cnt++;
- }
-- if (!remove_from_hanger)
-- ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb,
-- genbit, seq);
-- if (remove_from_hanger || ret)
-- brcmf_txfinalize(ifp, skb, true);
-
- return 0;
- }
-@@ -1547,7 +1559,8 @@ static int brcmf_fws_fifocreditback_indi
- return BRCMF_FWS_RET_OK_SCHEDULE;
- }
-
--static int brcmf_fws_txstatus_indicate(struct brcmf_fws_info *fws, u8 *data)
-+static int brcmf_fws_txstatus_indicate(struct brcmf_fws_info *fws, u8 type,
-+ u8 *data)
- {
- __le32 status_le;
- __le16 seq_le;
-@@ -1556,23 +1569,31 @@ static int brcmf_fws_txstatus_indicate(s
- u32 genbit;
- u8 flags;
- u16 seq;
-+ u8 compcnt;
-+ u8 compcnt_offset = BRCMF_FWS_TYPE_TXSTATUS_LEN;
-
-- fws->stats.txs_indicate++;
- memcpy(&status_le, data, sizeof(status_le));
- status = le32_to_cpu(status_le);
- flags = brcmf_txstatus_get_field(status, FLAGS);
- hslot = brcmf_txstatus_get_field(status, HSLOT);
- genbit = brcmf_txstatus_get_field(status, GENERATION);
- if (BRCMF_FWS_MODE_GET_REUSESEQ(fws->mode)) {
-- memcpy(&seq_le, &data[BRCMF_FWS_TYPE_PKTTAG_LEN],
-+ memcpy(&seq_le, &data[BRCMF_FWS_TYPE_TXSTATUS_LEN],
- sizeof(seq_le));
- seq = le16_to_cpu(seq_le);
-+ compcnt_offset += BRCMF_FWS_TYPE_SEQ_LEN;
- } else {
- seq = 0;
- }
-
-+ if (type == BRCMF_FWS_TYPE_COMP_TXSTATUS)
-+ compcnt = data[compcnt_offset];
-+ else
-+ compcnt = 1;
-+ fws->stats.txs_indicate += compcnt;
-+
- brcmf_fws_lock(fws);
-- brcmf_fws_txs_process(fws, flags, hslot, genbit, seq);
-+ brcmf_fws_txs_process(fws, flags, hslot, genbit, seq, compcnt);
- brcmf_fws_unlock(fws);
- return BRCMF_FWS_RET_OK_NOSCHEDULE;
- }
-@@ -1888,8 +1909,6 @@ void brcmf_fws_hdrpull(struct brcmf_if *
-
- err = BRCMF_FWS_RET_OK_NOSCHEDULE;
- switch (type) {
-- case BRCMF_FWS_TYPE_COMP_TXSTATUS:
-- break;
- case BRCMF_FWS_TYPE_HOST_REORDER_RXPKTS:
- rd = (struct brcmf_skb_reorder_data *)skb->cb;
- rd->reorder = data;
-@@ -1912,7 +1931,8 @@ void brcmf_fws_hdrpull(struct brcmf_if *
- err = brcmf_fws_request_indicate(fws, type, data);
- break;
- case BRCMF_FWS_TYPE_TXSTATUS:
-- brcmf_fws_txstatus_indicate(fws, data);
-+ case BRCMF_FWS_TYPE_COMP_TXSTATUS:
-+ brcmf_fws_txstatus_indicate(fws, type, data);
- break;
- case BRCMF_FWS_TYPE_FIFO_CREDITBACK:
- err = brcmf_fws_fifocreditback_indicate(fws, data);
-@@ -2001,7 +2021,7 @@ static void brcmf_fws_rollback_toq(struc
- fws->stats.rollback_failed++;
- hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
- brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_HOST_TOSSED,
-- hslot, 0, 0);
-+ hslot, 0, 0, 1);
- } else {
- fws->stats.rollback_success++;
- brcmf_fws_return_credits(fws, fifo, 1);
-@@ -2462,7 +2482,8 @@ void brcmf_fws_bustxfail(struct brcmf_fw
- }
- brcmf_fws_lock(fws);
- hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
-- brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_HOST_TOSSED, hslot, 0, 0);
-+ brcmf_fws_txs_process(fws, BRCMF_FWS_TXSTATUS_HOST_TOSSED, hslot, 0, 0,
-+ 1);
- brcmf_fws_unlock(fws);
- }
-
diff --git a/package/kernel/mac80211/patches/brcm/329-v5.0-0001-brcmfmac-add-4354-raw-pcie-device-id.patch b/package/kernel/mac80211/patches/brcm/329-v5.0-0001-brcmfmac-add-4354-raw-pcie-device-id.patch
deleted file mode 100644
index ead33db0d5..0000000000
--- a/package/kernel/mac80211/patches/brcm/329-v5.0-0001-brcmfmac-add-4354-raw-pcie-device-id.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From eb6b33bfb8f56859df7264dccc2ca8ab7c57342a Mon Sep 17 00:00:00 2001
-From: Winnie Chang <winnie.chang@cypress.com>
-Date: Wed, 21 Nov 2018 07:53:42 +0000
-Subject: [PATCH] brcmfmac: add 4354 raw pcie device id
-
-Add the raw 4354 PCIe device ID for unprogrammed Cypress boards.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Signed-off-by: Winnie Chang <winnie.chang@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 1 +
- drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -2019,6 +2019,7 @@ static const struct dev_pm_ops brcmf_pci
- static const struct pci_device_id brcmf_pcie_devid_table[] = {
- BRCMF_PCIE_DEVICE(BRCM_PCIE_4350_DEVICE_ID),
- BRCMF_PCIE_DEVICE_SUB(0x4355, BRCM_PCIE_VENDOR_ID_BROADCOM, 0x4355),
-+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4354_RAW_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
- BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
---- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
-@@ -74,6 +74,7 @@
- /* PCIE Device IDs */
- #define BRCM_PCIE_4350_DEVICE_ID 0x43a3
- #define BRCM_PCIE_4354_DEVICE_ID 0x43df
-+#define BRCM_PCIE_4354_RAW_DEVICE_ID 0x4354
- #define BRCM_PCIE_4356_DEVICE_ID 0x43ec
- #define BRCM_PCIE_43567_DEVICE_ID 0x43d3
- #define BRCM_PCIE_43570_DEVICE_ID 0x43d9
diff --git a/package/kernel/mac80211/patches/brcm/329-v5.0-0002-brcmfmac-set-F2-watermark-to-256-for-4373.patch b/package/kernel/mac80211/patches/brcm/329-v5.0-0002-brcmfmac-set-F2-watermark-to-256-for-4373.patch
deleted file mode 100644
index a915473b8c..0000000000
--- a/package/kernel/mac80211/patches/brcm/329-v5.0-0002-brcmfmac-set-F2-watermark-to-256-for-4373.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From e1a08730eeb0bad4d82c3bc40e74854872de618d Mon Sep 17 00:00:00 2001
-From: Wright Feng <wright.feng@cypress.com>
-Date: Wed, 21 Nov 2018 07:53:44 +0000
-Subject: [PATCH] brcmfmac: set F2 watermark to 256 for 4373
-
-We got SDIO_CRC_ERROR with 4373 on SDR104 when doing bi-directional
-throughput test. Enable watermark to 256 to guarantee the operation
-stability.
-
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Wright Feng <wright.feng@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/sdio.c | 26 +++++++++++++++++--
- 1 file changed, 24 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -49,6 +49,10 @@
- #define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500)
- #define CTL_DONE_TIMEOUT msecs_to_jiffies(2500)
-
-+/* watermark expressed in number of words */
-+#define DEFAULT_F2_WATERMARK 0x8
-+#define CY_4373_F2_WATERMARK 0x40
-+
- #ifdef DEBUG
-
- #define BRCMF_TRAP_INFO_SIZE 80
-@@ -138,6 +142,8 @@ struct rte_console {
- /* 1: isolate internal sdio signals, put external pads in tri-state; requires
- * sdio bus power cycle to clear (rev 9) */
- #define SBSDIO_DEVCTL_PADS_ISO 0x08
-+/* 1: enable F2 Watermark */
-+#define SBSDIO_DEVCTL_F2WM_ENAB 0x10
- /* Force SD->SB reset mapping (rev 11) */
- #define SBSDIO_DEVCTL_SB_RST_CTL 0x30
- /* Determined by CoreControl bit */
-@@ -4046,6 +4052,7 @@ static void brcmf_sdio_firmware_callback
- void *nvram;
- u32 nvram_len;
- u8 saveclk;
-+ u8 devctl;
-
- brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
-
-@@ -4101,8 +4108,23 @@ static void brcmf_sdio_firmware_callback
- brcmf_sdiod_writel(sdiod, core->base + SD_REG(hostintmask),
- bus->hostintmask, NULL);
-
--
-- brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 8, &err);
-+ switch (sdiod->func1->device) {
-+ case SDIO_DEVICE_ID_CYPRESS_4373:
-+ brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
-+ CY_4373_F2_WATERMARK);
-+ brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
-+ CY_4373_F2_WATERMARK, &err);
-+ devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL,
-+ &err);
-+ devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
-+ brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
-+ &err);
-+ break;
-+ default:
-+ brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
-+ DEFAULT_F2_WATERMARK, &err);
-+ break;
-+ }
- } else {
- /* Disable F2 again */
- sdio_disable_func(sdiod->func2);
diff --git a/package/kernel/mac80211/patches/brcm/329-v5.0-0003-brcmfmac-set-SDIO-F1-MesBusyCtrl-for-CYW4373.patch b/package/kernel/mac80211/patches/brcm/329-v5.0-0003-brcmfmac-set-SDIO-F1-MesBusyCtrl-for-CYW4373.patch
deleted file mode 100644
index 0e22a1545e..0000000000
--- a/package/kernel/mac80211/patches/brcm/329-v5.0-0003-brcmfmac-set-SDIO-F1-MesBusyCtrl-for-CYW4373.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 58e4bbea0c1d9b5ace11df968c5dc096ce052a73 Mon Sep 17 00:00:00 2001
-From: Madhan Mohan R <MadhanMohan.R@cypress.com>
-Date: Wed, 21 Nov 2018 07:53:45 +0000
-Subject: [PATCH] brcmfmac: set SDIO F1 MesBusyCtrl for CYW4373
-
-Along with F2 watermark (existing) configuration, F1 MesBusyCtrl
-should be enabled & sdio device RX FIFO watermark should be
-configured to avoid overflow errors.
-
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 3 +++
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 9 ++++++++-
- 2 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -4119,6 +4119,9 @@ static void brcmf_sdio_firmware_callback
- devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
- brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
- &err);
-+ brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
-+ CY_4373_F2_WATERMARK |
-+ SBSDIO_MESBUSYCTRL_ENAB, &err);
- break;
- default:
- brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
-@@ -77,7 +77,7 @@
- #define SBSDIO_GPIO_OUT 0x10006
- /* gpio enable */
- #define SBSDIO_GPIO_EN 0x10007
--/* rev < 7, watermark for sdio device */
-+/* rev < 7, watermark for sdio device TX path */
- #define SBSDIO_WATERMARK 0x10008
- /* control busy signal generation */
- #define SBSDIO_DEVICE_CTL 0x10009
-@@ -104,6 +104,13 @@
- #define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C
- /* MesBusyCtl (rev 11) */
- #define SBSDIO_FUNC1_MESBUSYCTRL 0x1001D
-+/* Watermark for sdio device RX path */
-+#define SBSDIO_MESBUSY_RXFIFO_WM_MASK 0x7F
-+#define SBSDIO_MESBUSY_RXFIFO_WM_SHIFT 0
-+/* Enable busy capability for MES access */
-+#define SBSDIO_MESBUSYCTRL_ENAB 0x80
-+#define SBSDIO_MESBUSYCTRL_ENAB_SHIFT 7
-+
- /* Sdio Core Rev 12 */
- #define SBSDIO_FUNC1_WAKEUPCTRL 0x1001E
- #define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK 0x1
diff --git a/package/kernel/mac80211/patches/brcm/329-v5.0-0004-brcmfmac-add-support-for-CYW43012-SDIO-chipset.patch b/package/kernel/mac80211/patches/brcm/329-v5.0-0004-brcmfmac-add-support-for-CYW43012-SDIO-chipset.patch
deleted file mode 100644
index e53d4bafa0..0000000000
--- a/package/kernel/mac80211/patches/brcm/329-v5.0-0004-brcmfmac-add-support-for-CYW43012-SDIO-chipset.patch
+++ /dev/null
@@ -1,253 +0,0 @@
-From 35cb51b2162a1a7c5cd977f92595e60ab14d3b22 Mon Sep 17 00:00:00 2001
-From: Chi-Hsien Lin <Chi-Hsien.Lin@cypress.com>
-Date: Wed, 21 Nov 2018 07:53:47 +0000
-Subject: [PATCH] brcmfmac: add support for CYW43012 SDIO chipset
-
-CYW43012 is a 1x1 802.11a/b/g/n Dual-Band HT20, 256-QAM/Turbo QAM. It
-is an Ultra Low Power WLAN+BT combo chip.
-
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Praveen Babu C <praveen.chandran@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 1 +
- .../broadcom/brcm80211/brcmfmac/chip.c | 14 +++-
- .../broadcom/brcm80211/brcmfmac/sdio.c | 74 ++++++++++++++++---
- .../broadcom/brcm80211/include/brcm_hw_ids.h | 1 +
- include/linux/mmc/sdio_ids.h | 1 +
- 5 files changed, 78 insertions(+), 13 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
-@@ -972,6 +972,7 @@ static const struct sdio_device_id brcmf
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4356),
- BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_CYPRESS_4373),
-+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_CYPRESS_43012),
- { /* end: all zeroes */ }
- };
- MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
-@@ -165,6 +165,7 @@ struct sbconfig {
- #define SRCI_LSS_MASK 0x00f00000
- #define SRCI_LSS_SHIFT 20
- #define SRCI_SRNB_MASK 0xf0
-+#define SRCI_SRNB_MASK_EXT 0x100
- #define SRCI_SRNB_SHIFT 4
- #define SRCI_SRBSZ_MASK 0xf
- #define SRCI_SRBSZ_SHIFT 0
-@@ -592,7 +593,13 @@ static void brcmf_chip_socram_ramsize(st
- if (lss != 0)
- *ramsize += (1 << ((lss - 1) + SR_BSZ_BASE));
- } else {
-- nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
-+ /* length of SRAM Banks increased for corerev greater than 23 */
-+ if (sr->pub.rev >= 23) {
-+ nb = (coreinfo & (SRCI_SRNB_MASK | SRCI_SRNB_MASK_EXT))
-+ >> SRCI_SRNB_SHIFT;
-+ } else {
-+ nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
-+ }
- for (i = 0; i < nb; i++) {
- retent = brcmf_chip_socram_banksize(sr, i, &banksize);
- *ramsize += banksize;
-@@ -1356,6 +1363,11 @@ bool brcmf_chip_sr_capable(struct brcmf_
- addr = CORE_CC_REG(base, sr_control1);
- reg = chip->ops->read32(chip->ctx, addr);
- return reg != 0;
-+ case CY_CC_43012_CHIP_ID:
-+ addr = CORE_CC_REG(pmu->base, retention_ctl);
-+ reg = chip->ops->read32(chip->ctx, addr);
-+ return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK |
-+ PMU_RCTL_LOGIC_DISABLE_MASK)) == 0;
- default:
- addr = CORE_CC_REG(pmu->base, pmucapabilities_ext);
- reg = chip->ops->read32(chip->ctx, addr);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -624,6 +624,7 @@ BRCMF_FW_DEF(43455, "brcmfmac43455-sdio"
- BRCMF_FW_DEF(4354, "brcmfmac4354-sdio");
- BRCMF_FW_DEF(4356, "brcmfmac4356-sdio");
- BRCMF_FW_DEF(4373, "brcmfmac4373-sdio");
-+BRCMF_FW_DEF(43012, "brcmfmac43012-sdio");
-
- static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
- BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
-@@ -643,7 +644,8 @@ static const struct brcmf_firmware_mappi
- BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455),
- BRCMF_FW_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354),
- BRCMF_FW_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356),
-- BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373)
-+ BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373),
-+ BRCMF_FW_ENTRY(CY_CC_43012_CHIP_ID, 0xFFFFFFFF, 43012)
- };
-
- static void pkt_align(struct sk_buff *p, int len, int align)
-@@ -677,6 +679,14 @@ brcmf_sdio_kso_control(struct brcmf_sdio
- /* 1st KSO write goes to AOS wake up core if device is asleep */
- brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
-
-+ /* In case of 43012 chip, the chip could go down immediately after
-+ * KSO bit is cleared. So the further reads of KSO register could
-+ * fail. Thereby just bailing out immediately after clearing KSO
-+ * bit, to avoid polling of KSO bit.
-+ */
-+ if (!on && bus->ci->chip == CY_CC_43012_CHIP_ID)
-+ return err;
-+
- if (on) {
- /* device WAKEUP through KSO:
- * write bit 0 & read back until
-@@ -2402,6 +2412,14 @@ static int brcmf_sdio_tx_ctrlframe(struc
- return ret;
- }
-
-+static bool brcmf_chip_is_ulp(struct brcmf_chip *ci)
-+{
-+ if (ci->chip == CY_CC_43012_CHIP_ID)
-+ return true;
-+ else
-+ return false;
-+}
-+
- static void brcmf_sdio_bus_stop(struct device *dev)
- {
- struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-@@ -2409,7 +2427,7 @@ static void brcmf_sdio_bus_stop(struct d
- struct brcmf_sdio *bus = sdiodev->bus;
- struct brcmf_core *core = bus->sdio_core;
- u32 local_hostintmask;
-- u8 saveclk;
-+ u8 saveclk, bpreq;
- int err;
-
- brcmf_dbg(TRACE, "Enter\n");
-@@ -2436,9 +2454,14 @@ static void brcmf_sdio_bus_stop(struct d
- /* Force backplane clocks to assure F2 interrupt propagates */
- saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
- &err);
-- if (!err)
-- brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-- (saveclk | SBSDIO_FORCE_HT), &err);
-+ if (!err) {
-+ bpreq = saveclk;
-+ bpreq |= brcmf_chip_is_ulp(bus->ci) ?
-+ SBSDIO_HT_AVAIL_REQ : SBSDIO_FORCE_HT;
-+ brcmf_sdiod_writeb(sdiodev,
-+ SBSDIO_FUNC1_CHIPCLKCSR,
-+ bpreq, &err);
-+ }
- if (err)
- brcmf_err("Failed to force clock for F2: err %d\n",
- err);
-@@ -3328,20 +3351,45 @@ err:
- return bcmerror;
- }
-
-+static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus)
-+{
-+ if (bus->ci->chip == CY_CC_43012_CHIP_ID)
-+ return true;
-+ else
-+ return false;
-+}
-+
- static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
- {
- int err = 0;
- u8 val;
-+ u8 wakeupctrl;
-+ u8 cardcap;
-+ u8 chipclkcsr;
-
- brcmf_dbg(TRACE, "Enter\n");
-
-+ if (brcmf_chip_is_ulp(bus->ci)) {
-+ wakeupctrl = SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT;
-+ chipclkcsr = SBSDIO_HT_AVAIL_REQ;
-+ } else {
-+ wakeupctrl = SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
-+ chipclkcsr = SBSDIO_FORCE_HT;
-+ }
-+
-+ if (brcmf_sdio_aos_no_decode(bus)) {
-+ cardcap = SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC;
-+ } else {
-+ cardcap = (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
-+ SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT);
-+ }
-+
- val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
- if (err) {
- brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
- return;
- }
--
-- val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
-+ val |= 1 << wakeupctrl;
- brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
- if (err) {
- brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
-@@ -3350,8 +3398,7 @@ static void brcmf_sdio_sr_init(struct br
-
- /* Add CMD14 Support */
- brcmf_sdiod_func0_wb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
-- (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
-- SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
-+ cardcap,
- &err);
- if (err) {
- brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n");
-@@ -3359,7 +3406,7 @@ static void brcmf_sdio_sr_init(struct br
- }
-
- brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-- SBSDIO_FORCE_HT, &err);
-+ chipclkcsr, &err);
- if (err) {
- brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
- return;
-@@ -4051,7 +4098,7 @@ static void brcmf_sdio_firmware_callback
- const struct firmware *code;
- void *nvram;
- u32 nvram_len;
-- u8 saveclk;
-+ u8 saveclk, bpreq;
- u8 devctl;
-
- brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
-@@ -4085,8 +4132,11 @@ static void brcmf_sdio_firmware_callback
- /* Force clocks on backplane to be sure F2 interrupt propagates */
- saveclk = brcmf_sdiod_readb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR, &err);
- if (!err) {
-+ bpreq = saveclk;
-+ bpreq |= brcmf_chip_is_ulp(bus->ci) ?
-+ SBSDIO_HT_AVAIL_REQ : SBSDIO_FORCE_HT;
- brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR,
-- (saveclk | SBSDIO_FORCE_HT), &err);
-+ bpreq, &err);
- }
- if (err) {
- brcmf_err("Failed to force clock for F2: err %d\n", err);
---- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
-@@ -60,6 +60,7 @@
- #define BRCM_CC_43664_CHIP_ID 43664
- #define BRCM_CC_4371_CHIP_ID 0x4371
- #define CY_CC_4373_CHIP_ID 0x4373
-+#define CY_CC_43012_CHIP_ID 43012
-
- /* USB Device IDs */
- #define BRCM_USB_43143_DEVICE_ID 0xbd1e
---- a/include/linux/mmc/sdio_ids.h
-+++ b/include/linux/mmc/sdio_ids.h
-@@ -42,6 +42,7 @@
- #define SDIO_DEVICE_ID_BROADCOM_4354 0x4354
- #define SDIO_DEVICE_ID_BROADCOM_4356 0x4356
- #define SDIO_DEVICE_ID_CYPRESS_4373 0x4373
-+#define SDIO_DEVICE_ID_CYPRESS_43012 43012
-
- #define SDIO_VENDOR_ID_INTEL 0x0089
- #define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402
diff --git a/package/kernel/mac80211/patches/brcm/329-v5.0-0005-brcmfmac-allow-GCI-core-enumuration.patch b/package/kernel/mac80211/patches/brcm/329-v5.0-0005-brcmfmac-allow-GCI-core-enumuration.patch
deleted file mode 100644
index 809ee9a516..0000000000
--- a/package/kernel/mac80211/patches/brcm/329-v5.0-0005-brcmfmac-allow-GCI-core-enumuration.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From b021a6bc1175442609af0b66d64f850883e155fb Mon Sep 17 00:00:00 2001
-From: Chi-Hsien Lin <Chi-Hsien.Lin@cypress.com>
-Date: Wed, 21 Nov 2018 07:53:48 +0000
-Subject: [PATCH] brcmfmac: allow GCI core enumuration
-
-GCI core is needed for ULP operation. Allow GCI core enumuration with
-below changes:
- - Allow GCI to be added to core list even when it doesn't have a wrapper.
- - Allow 8K address space size.
- - Don't overwrite the address value when an additional size descriptor
- is in place.
-
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/chip.c | 14 ++++++++------
- 1 file changed, 8 insertions(+), 6 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
-@@ -786,7 +786,7 @@ static int brcmf_chip_dmp_get_regaddr(st
- u32 *regbase, u32 *wrapbase)
- {
- u8 desc;
-- u32 val;
-+ u32 val, szdesc;
- u8 mpnum = 0;
- u8 stype, sztype, wraptype;
-
-@@ -832,14 +832,15 @@ static int brcmf_chip_dmp_get_regaddr(st
-
- /* next size descriptor can be skipped */
- if (sztype == DMP_SLAVE_SIZE_DESC) {
-- val = brcmf_chip_dmp_get_desc(ci, eromaddr, NULL);
-+ szdesc = brcmf_chip_dmp_get_desc(ci, eromaddr, NULL);
- /* skip upper size descriptor if present */
-- if (val & DMP_DESC_ADDRSIZE_GT32)
-+ if (szdesc & DMP_DESC_ADDRSIZE_GT32)
- brcmf_chip_dmp_get_desc(ci, eromaddr, NULL);
- }
-
-- /* only look for 4K register regions */
-- if (sztype != DMP_SLAVE_SIZE_4K)
-+ /* look for 4K or 8K register regions */
-+ if (sztype != DMP_SLAVE_SIZE_4K &&
-+ sztype != DMP_SLAVE_SIZE_8K)
- continue;
-
- stype = (val & DMP_SLAVE_TYPE) >> DMP_SLAVE_TYPE_S;
-@@ -896,7 +897,8 @@ int brcmf_chip_dmp_erom_scan(struct brcm
-
- /* need core with ports */
- if (nmw + nsw == 0 &&
-- id != BCMA_CORE_PMU)
-+ id != BCMA_CORE_PMU &&
-+ id != BCMA_CORE_GCI)
- continue;
-
- /* try to obtain register address info */
diff --git a/package/kernel/mac80211/patches/brcm/329-v5.0-0006-brcmfmac-update-43012-F2-watermark-setting-to-fix-DM.patch b/package/kernel/mac80211/patches/brcm/329-v5.0-0006-brcmfmac-update-43012-F2-watermark-setting-to-fix-DM.patch
deleted file mode 100644
index 3b44952af4..0000000000
--- a/package/kernel/mac80211/patches/brcm/329-v5.0-0006-brcmfmac-update-43012-F2-watermark-setting-to-fix-DM.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From f95a8d9c6aca196f1ace5b2e53a3dd3bc491b1b3 Mon Sep 17 00:00:00 2001
-From: Naveen Gupta <naveen.gupta@cypress.com>
-Date: Wed, 21 Nov 2018 07:53:49 +0000
-Subject: [PATCH] brcmfmac: update 43012 F2 watermark setting to fix DMA Error
- during UDP RX Traffic
-
-The number of words that the read FIFO has to contain except
-the end of frame before sends data back to the host.
-Max watermark = (512B - 2* (BurstLength))/4 =
-(512 - 128)/4 = 384/4 = 0x60
-so if burst length (i.e. BurstLength = 64) is increased,
-watermark has to be reduced. This is the optimal setting for this chip.
-
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Naveen Gupta <naveen.gupta@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -52,6 +52,7 @@
- /* watermark expressed in number of words */
- #define DEFAULT_F2_WATERMARK 0x8
- #define CY_4373_F2_WATERMARK 0x40
-+#define CY_43012_F2_WATERMARK 0x60
-
- #ifdef DEBUG
-
-@@ -4173,6 +4174,17 @@ static void brcmf_sdio_firmware_callback
- CY_4373_F2_WATERMARK |
- SBSDIO_MESBUSYCTRL_ENAB, &err);
- break;
-+ case SDIO_DEVICE_ID_CYPRESS_43012:
-+ brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
-+ CY_43012_F2_WATERMARK);
-+ brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
-+ CY_43012_F2_WATERMARK, &err);
-+ devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL,
-+ &err);
-+ devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
-+ brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
-+ &err);
-+ break;
- default:
- brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
- DEFAULT_F2_WATERMARK, &err);
diff --git a/package/kernel/mac80211/patches/brcm/329-v5.0-0007-brcmfmac-4373-save-restore-support.patch b/package/kernel/mac80211/patches/brcm/329-v5.0-0007-brcmfmac-4373-save-restore-support.patch
deleted file mode 100644
index 61c65692de..0000000000
--- a/package/kernel/mac80211/patches/brcm/329-v5.0-0007-brcmfmac-4373-save-restore-support.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 2f2d389efda4caa4c1b69cb4fa2ab217f0fe6d6f Mon Sep 17 00:00:00 2001
-From: Chi-Hsien Lin <Chi-Hsien.Lin@cypress.com>
-Date: Wed, 21 Nov 2018 07:53:50 +0000
-Subject: [PATCH] brcmfmac: 4373 save-restore support
-
-Use chipcommon sr_control0 register to check 4373 sr support.
-
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/chip.c | 5 +++++
- .../broadcom/brcm80211/include/chipcommon.h | 19 +++++++++++++++++++
- 2 files changed, 24 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
-@@ -1365,6 +1365,11 @@ bool brcmf_chip_sr_capable(struct brcmf_
- addr = CORE_CC_REG(base, sr_control1);
- reg = chip->ops->read32(chip->ctx, addr);
- return reg != 0;
-+ case CY_CC_4373_CHIP_ID:
-+ /* explicitly check SR engine enable bit */
-+ addr = CORE_CC_REG(base, sr_control0);
-+ reg = chip->ops->read32(chip->ctx, addr);
-+ return (reg & CC_SR_CTL0_ENABLE_MASK) != 0;
- case CY_CC_43012_CHIP_ID:
- addr = CORE_CC_REG(pmu->base, retention_ctl);
- reg = chip->ops->read32(chip->ctx, addr);
---- a/drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h
-@@ -269,6 +269,25 @@ struct chipcregs {
- /* GSIO (spi/i2c) present, rev >= 37 */
- #define CC_CAP2_GSIO 0x00000002
-
-+/* sr_control0, rev >= 48 */
-+#define CC_SR_CTL0_ENABLE_MASK BIT(0)
-+#define CC_SR_CTL0_ENABLE_SHIFT 0
-+#define CC_SR_CTL0_EN_SR_ENG_CLK_SHIFT 1 /* sr_clk to sr_memory enable */
-+#define CC_SR_CTL0_RSRC_TRIGGER_SHIFT 2 /* Rising edge resource trigger 0 to
-+ * sr_engine
-+ */
-+#define CC_SR_CTL0_MIN_DIV_SHIFT 6 /* Min division value for fast clk
-+ * in sr_engine
-+ */
-+#define CC_SR_CTL0_EN_SBC_STBY_SHIFT 16
-+#define CC_SR_CTL0_EN_SR_ALP_CLK_MASK_SHIFT 18
-+#define CC_SR_CTL0_EN_SR_HT_CLK_SHIFT 19
-+#define CC_SR_CTL0_ALLOW_PIC_SHIFT 20 /* Allow pic to separate power
-+ * domains
-+ */
-+#define CC_SR_CTL0_MAX_SR_LQ_CLK_CNT_SHIFT 25
-+#define CC_SR_CTL0_EN_MEM_DISABLE_FOR_SLEEP 30
-+
- /* pmucapabilities */
- #define PCAP_REV_MASK 0x000000ff
- #define PCAP_RC_MASK 0x00001f00
diff --git a/package/kernel/mac80211/patches/brcm/329-v5.0-0008-brcmfmac-disable-command-decode-in-sdio_aos.patch b/package/kernel/mac80211/patches/brcm/329-v5.0-0008-brcmfmac-disable-command-decode-in-sdio_aos.patch
deleted file mode 100644
index a1125e588d..0000000000
--- a/package/kernel/mac80211/patches/brcm/329-v5.0-0008-brcmfmac-disable-command-decode-in-sdio_aos.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 29f6589140a10ece8c1d73f58043ea5b3473ab3e Mon Sep 17 00:00:00 2001
-From: Wright Feng <wright.feng@cypress.com>
-Date: Wed, 21 Nov 2018 07:53:52 +0000
-Subject: [PATCH] brcmfmac: disable command decode in sdio_aos
-
-AOS is a part of the SDIOD core that becomes active when the rest of
-SDIOD is sleeping to keep SDIO bus alive responding to reduced set of
-commands.
-
-Transaction between AOS and SDIOD is not protected, and if cmd 52 is
-received in AOS and in the middle of response state changed from AOS to
-SDIOD, response is corrupted and it causes to SDIO Host controller to
-hang.
-
-Command decode for below chips are disabled in this commit:
- - 4339
- - 4345
- - 4354
- - 4373
-
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Wright Feng <wright.feng@cypress.com>
-Signed-off-by: Double Lo <double.lo@cypress.com>
-Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -3354,7 +3354,11 @@ err:
-
- static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus)
- {
-- if (bus->ci->chip == CY_CC_43012_CHIP_ID)
-+ if (bus->ci->chip == CY_CC_43012_CHIP_ID ||
-+ bus->ci->chip == CY_CC_4373_CHIP_ID ||
-+ bus->ci->chip == BRCM_CC_4339_CHIP_ID ||
-+ bus->ci->chip == BRCM_CC_4345_CHIP_ID ||
-+ bus->ci->chip == BRCM_CC_4354_CHIP_ID)
- return true;
- else
- return false;
diff --git a/package/kernel/mac80211/patches/brcm/330-v5.0-0001-brcmfmac-fix-false-positive-Wmaybe-unintialized-warn.patch b/package/kernel/mac80211/patches/brcm/330-v5.0-0001-brcmfmac-fix-false-positive-Wmaybe-unintialized-warn.patch
deleted file mode 100644
index 5d454fd3ee..0000000000
--- a/package/kernel/mac80211/patches/brcm/330-v5.0-0001-brcmfmac-fix-false-positive-Wmaybe-unintialized-warn.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 412dd15c8177d93abe0c8787b83b31c5eb061405 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Mon, 10 Dec 2018 21:55:37 +0100
-Subject: [PATCH] brcmfmac: fix false-positive -Wmaybe-unintialized warning
-
-When CONFIG_NO_AUTO_INLINE is set, we get a false-postive warning
-for the brcmf_fw_request_nvram_done() function, after gcc figures
-out that brcmf_fw_nvram_from_efi() might not set the 'data_len'
-variable, but fails to notice that it always returns NULL:
-
-drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c: In function 'brcmf_fw_request_nvram_done':
-drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c:560:11: error: 'data_len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
-
-Mark it 'inline' to force gcc to understand this.
-
-Fixes: ce2e6db554fa ("brcmfmac: Add support for getting nvram contents from EFI variables")
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Reviewed-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -512,7 +512,7 @@ fail:
- return NULL;
- }
- #else
--static u8 *brcmf_fw_nvram_from_efi(size_t *data_len) { return NULL; }
-+static inline u8 *brcmf_fw_nvram_from_efi(size_t *data_len) { return NULL; }
- #endif
-
- static void brcmf_fw_free_request(struct brcmf_fw_request *req)
diff --git a/package/kernel/mac80211/patches/brcm/332-v5.0-0001-brcmfmac-Fix-access-point-mode.patch b/package/kernel/mac80211/patches/brcm/332-v5.0-0001-brcmfmac-Fix-access-point-mode.patch
deleted file mode 100644
index acf587676e..0000000000
--- a/package/kernel/mac80211/patches/brcm/332-v5.0-0001-brcmfmac-Fix-access-point-mode.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 861cb5eb467f5e38dce1aabe4e8db379255bd89b Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <stefan.wahren@i2se.com>
-Date: Wed, 12 Dec 2018 20:20:06 +0100
-Subject: [PATCH] brcmfmac: Fix access point mode
-
-Since commit 1204aa17f3b4 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag")
-the Raspberry Pi 3 A+ (BCM43455) isn't able to operate in AP mode with
-hostapd (device_ap_sme=1 use_monitor=0):
-
-brcmfmac: brcmf_cfg80211_stop_ap: setting AP mode failed -52
-
-So add the missing mgmt_stypes for AP mode to fix this.
-
-Fixes: 1204aa17f3b4 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag")
-Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -6308,6 +6308,16 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] =
- .tx = 0xffff,
- .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
- BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
-+ },
-+ [NL80211_IFTYPE_AP] = {
-+ .tx = 0xffff,
-+ .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
-+ BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
-+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
-+ BIT(IEEE80211_STYPE_DISASSOC >> 4) |
-+ BIT(IEEE80211_STYPE_AUTH >> 4) |
-+ BIT(IEEE80211_STYPE_DEAUTH >> 4) |
-+ BIT(IEEE80211_STYPE_ACTION >> 4)
- }
- };
-
diff --git a/package/kernel/mac80211/patches/brcm/340-v5.1-brcmfmac-Add-DMI-nvram-filename-quirk-for-PoV-TAB-P1.patch b/package/kernel/mac80211/patches/brcm/340-v5.1-brcmfmac-Add-DMI-nvram-filename-quirk-for-PoV-TAB-P1.patch
deleted file mode 100644
index 4cb3a4243a..0000000000
--- a/package/kernel/mac80211/patches/brcm/340-v5.1-brcmfmac-Add-DMI-nvram-filename-quirk-for-PoV-TAB-P1.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 4d95f99c59b8b814bcf09ba86020d937ec7caa86 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Thu, 20 Dec 2018 17:40:58 +0100
-Subject: [PATCH] brcmfmac: Add DMI nvram filename quirk for PoV TAB-P1006W-232
- tablet
-
-The Point of View TAB-P1006W-232 tablet contains quite generic names in
-the sys_vendor and product_name DMI strings, without this patch brcmfmac
-will try to load: brcmfmac43340-sdio.Insyde-BayTrail.txt as nvram file
-which is a bit too generic.
-
-Add a DMI quirk so that a unique and clearly identifiable nvram file
-name is used on the PoV TAB-P1006W-232 tablet.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/dmi.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
-@@ -43,6 +43,10 @@ static const struct brcmf_dmi_data meego
- BRCM_CC_43340_CHIP_ID, 2, "meegopad-t08"
- };
-
-+static const struct brcmf_dmi_data pov_tab_p1006w_data = {
-+ BRCM_CC_43340_CHIP_ID, 2, "pov-tab-p1006w-data"
-+};
-+
- static const struct dmi_system_id dmi_platform_data[] = {
- {
- /* Match for the GPDwin which unfortunately uses somewhat
-@@ -81,6 +85,17 @@ static const struct dmi_system_id dmi_pl
- },
- .driver_data = (void *)&meegopad_t08_data,
- },
-+ {
-+ /* Point of View TAB-P1006W-232 */
-+ .matches = {
-+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
-+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "BayTrail"),
-+ /* Note 105b is Foxcon's USB/PCI vendor id */
-+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "105B"),
-+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "0E57"),
-+ },
-+ .driver_data = (void *)&pov_tab_p1006w_data,
-+ },
- {}
- };
-
diff --git a/package/kernel/mac80211/patches/brcm/341-v5.1-brcmfmac-add-a-check-for-the-status-of-usb_register.patch b/package/kernel/mac80211/patches/brcm/341-v5.1-brcmfmac-add-a-check-for-the-status-of-usb_register.patch
deleted file mode 100644
index 3568910678..0000000000
--- a/package/kernel/mac80211/patches/brcm/341-v5.1-brcmfmac-add-a-check-for-the-status-of-usb_register.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 42daad3343be4a4e1ee03e30a5f5cc731dadfef5 Mon Sep 17 00:00:00 2001
-From: Kangjie Lu <kjlu@umn.edu>
-Date: Tue, 25 Dec 2018 19:22:24 -0600
-Subject: [PATCH] brcmfmac: add a check for the status of usb_register
-
-usb_register() may fail, so let's check its status and issue an error
-message if it fails.
-
-Signed-off-by: Kangjie Lu <kjlu@umn.edu>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-@@ -1552,6 +1552,10 @@ void brcmf_usb_exit(void)
-
- void brcmf_usb_register(void)
- {
-+ int ret;
-+
- brcmf_dbg(USB, "Enter\n");
-- usb_register(&brcmf_usbdrvr);
-+ ret = usb_register(&brcmf_usbdrvr);
-+ if (ret)
-+ brcmf_err("usb_register failed %d\n", ret);
- }
diff --git a/package/kernel/mac80211/patches/brcm/342-v5.1-brcmfmac-fix-system-warning-message-during-wowl-susp.patch b/package/kernel/mac80211/patches/brcm/342-v5.1-brcmfmac-fix-system-warning-message-during-wowl-susp.patch
deleted file mode 100644
index 9115373add..0000000000
--- a/package/kernel/mac80211/patches/brcm/342-v5.1-brcmfmac-fix-system-warning-message-during-wowl-susp.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 3a33bd840523aaa06f4429fbfd38922bf0dc2e8d Mon Sep 17 00:00:00 2001
-From: Lo-Hsiang Lo <double.lo@cypress.com>
-Date: Mon, 7 Jan 2019 08:46:16 +0000
-Subject: [PATCH] brcmfmac: fix system warning message during wowl suspend
-
-There is a system warning message, warn_slowpath-fmt, during suspend
-while using supplicant join AP and enable wowl feature by IW command.
-It's caused by brcmf_pno_remove_request path can't find the reqid.
-This fix will not go to remove pno request function if there is no
-pno scan.
-
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Lo-Hsiang Lo <double.lo@cypress.com>
-Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
-@@ -496,6 +496,11 @@ int brcmf_pno_stop_sched_scan(struct brc
- brcmf_dbg(TRACE, "reqid=%llu\n", reqid);
-
- pi = ifp_to_pno(ifp);
-+
-+ /* No PNO request */
-+ if (!pi->n_reqs)
-+ return 0;
-+
- err = brcmf_pno_remove_request(pi, reqid);
- if (err)
- return err;
diff --git a/package/kernel/mac80211/patches/brcm/344-v5.1-brcmfmac-modify-__brcmf_err-to-take-bus-as-a-paramet.patch b/package/kernel/mac80211/patches/brcm/344-v5.1-brcmfmac-modify-__brcmf_err-to-take-bus-as-a-paramet.patch
deleted file mode 100644
index f83f38f274..0000000000
--- a/package/kernel/mac80211/patches/brcm/344-v5.1-brcmfmac-modify-__brcmf_err-to-take-bus-as-a-paramet.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From 5cc898fbcb352b764f8d51c16e10e2eb0056173d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 6 Feb 2019 12:28:15 +0100
-Subject: [PATCH] brcmfmac: modify __brcmf_err() to take bus as a parameter
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far __brcmf_err() was using pr_err() which didn't allow identifying
-device that was affected by an error. It's crucial for systems with more
-than 1 device supported by brcmfmac (a common case for home routers).
-
-This change allows passing struct brcmf_bus to the __brcmf_err(). That
-struct has been agreed to be the most common one. It allows accessing
-struct device easily & using dev_err() printing helper.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/broadcom/brcm80211/brcmfmac/common.c | 7 +++++--
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 8 +++++---
- .../wireless/broadcom/brcm80211/brcmfmac/tracepoint.c | 9 +++++++--
- 3 files changed, 17 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-@@ -350,7 +350,7 @@ done:
- }
-
- #ifndef CPTCFG_BRCM_TRACING
--void __brcmf_err(const char *func, const char *fmt, ...)
-+void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...)
- {
- struct va_format vaf;
- va_list args;
-@@ -359,7 +359,10 @@ void __brcmf_err(const char *func, const
-
- vaf.fmt = fmt;
- vaf.va = &args;
-- pr_err("%s: %pV", func, &vaf);
-+ if (bus)
-+ dev_err(bus->dev, "%s: %pV", func, &vaf);
-+ else
-+ pr_err("%s: %pV", func, &vaf);
-
- va_end(args);
- }
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-@@ -45,8 +45,10 @@
- #undef pr_fmt
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
--__printf(2, 3)
--void __brcmf_err(const char *func, const char *fmt, ...);
-+struct brcmf_bus;
-+
-+__printf(3, 4)
-+void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...);
- /* Macro for error messages. When debugging / tracing the driver all error
- * messages are important to us.
- */
-@@ -55,7 +57,7 @@ void __brcmf_err(const char *func, const
- if (IS_ENABLED(CPTCFG_BRCMDBG) || \
- IS_ENABLED(CPTCFG_BRCM_TRACING) || \
- net_ratelimit()) \
-- __brcmf_err(__func__, fmt, ##__VA_ARGS__); \
-+ __brcmf_err(NULL, __func__, fmt, ##__VA_ARGS__);\
- } while (0)
-
- #if defined(DEBUG) || defined(CPTCFG_BRCM_TRACING)
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c
-@@ -14,14 +14,16 @@
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-+#include <linux/device.h>
- #include <linux/module.h> /* bug in tracepoint.h, it should include this */
-
- #ifndef __CHECKER__
- #define CREATE_TRACE_POINTS
-+#include "bus.h"
- #include "tracepoint.h"
- #include "debug.h"
-
--void __brcmf_err(const char *func, const char *fmt, ...)
-+void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...)
- {
- struct va_format vaf = {
- .fmt = fmt,
-@@ -30,7 +32,10 @@ void __brcmf_err(const char *func, const
-
- va_start(args, fmt);
- vaf.va = &args;
-- pr_err("%s: %pV", func, &vaf);
-+ if (bus)
-+ dev_err(bus->dev, "%s: %pV", func, &vaf);
-+ else
-+ pr_err("%s: %pV", func, &vaf);
- trace_brcmf_err(func, &vaf);
- va_end(args);
- }
diff --git a/package/kernel/mac80211/patches/brcm/345-v5.1-brcmfmac-pass-bus-to-the-__brcmf_err-in-pcie.c.patch b/package/kernel/mac80211/patches/brcm/345-v5.1-brcmfmac-pass-bus-to-the-__brcmf_err-in-pcie.c.patch
deleted file mode 100644
index 8eceee6859..0000000000
--- a/package/kernel/mac80211/patches/brcm/345-v5.1-brcmfmac-pass-bus-to-the-__brcmf_err-in-pcie.c.patch
+++ /dev/null
@@ -1,266 +0,0 @@
-From 8602e62441aba276cafd68034b72162fbc5ca0a6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 6 Feb 2019 12:28:16 +0100
-Subject: [PATCH] brcmfmac: pass bus to the __brcmf_err() in pcie.c
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This enables dev_err() usage (instead of pr_err()) in the __brcmf_err().
-It makes error messages more meaningful and is important for debugging
-errors/bugs on systems with multiple brcmfmac supported devices.
-
-All bus files should follow & get updated similarly (soon).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/debug.h | 2 +
- .../broadcom/brcm80211/brcmfmac/pcie.c | 59 +++++++++++--------
- 2 files changed, 38 insertions(+), 23 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-@@ -52,6 +52,7 @@ void __brcmf_err(struct brcmf_bus *bus,
- /* Macro for error messages. When debugging / tracing the driver all error
- * messages are important to us.
- */
-+#ifndef brcmf_err
- #define brcmf_err(fmt, ...) \
- do { \
- if (IS_ENABLED(CPTCFG_BRCMDBG) || \
-@@ -59,6 +60,7 @@ void __brcmf_err(struct brcmf_bus *bus,
- net_ratelimit()) \
- __brcmf_err(NULL, __func__, fmt, ##__VA_ARGS__);\
- } while (0)
-+#endif
-
- #if defined(DEBUG) || defined(CPTCFG_BRCM_TRACING)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -30,6 +30,15 @@
- #include <brcmu_wifi.h>
- #include <brcm_hw_ids.h>
-
-+/* Custom brcmf_err() that takes bus arg and passes it further */
-+#define brcmf_err(bus, fmt, ...) \
-+ do { \
-+ if (IS_ENABLED(CPTCFG_BRCMDBG) || \
-+ IS_ENABLED(CPTCFG_BRCM_TRACING) || \
-+ net_ratelimit()) \
-+ __brcmf_err(bus, __func__, fmt, ##__VA_ARGS__); \
-+ } while (0)
-+
- #include "debug.h"
- #include "bus.h"
- #include "commonring.h"
-@@ -531,6 +540,7 @@ static void
- brcmf_pcie_select_core(struct brcmf_pciedev_info *devinfo, u16 coreid)
- {
- const struct pci_dev *pdev = devinfo->pdev;
-+ struct brcmf_bus *bus = dev_get_drvdata(&pdev->dev);
- struct brcmf_core *core;
- u32 bar0_win;
-
-@@ -548,7 +558,7 @@ brcmf_pcie_select_core(struct brcmf_pcie
- }
- }
- } else {
-- brcmf_err("Unsupported core selected %x\n", coreid);
-+ brcmf_err(bus, "Unsupported core selected %x\n", coreid);
- }
- }
-
-@@ -848,9 +858,8 @@ static irqreturn_t brcmf_pcie_isr_thread
-
- static int brcmf_pcie_request_irq(struct brcmf_pciedev_info *devinfo)
- {
-- struct pci_dev *pdev;
--
-- pdev = devinfo->pdev;
-+ struct pci_dev *pdev = devinfo->pdev;
-+ struct brcmf_bus *bus = dev_get_drvdata(&pdev->dev);
-
- brcmf_pcie_intr_disable(devinfo);
-
-@@ -861,7 +870,7 @@ static int brcmf_pcie_request_irq(struct
- brcmf_pcie_isr_thread, IRQF_SHARED,
- "brcmf_pcie_intr", devinfo)) {
- pci_disable_msi(pdev);
-- brcmf_err("Failed to request IRQ %d\n", pdev->irq);
-+ brcmf_err(bus, "Failed to request IRQ %d\n", pdev->irq);
- return -EIO;
- }
- devinfo->irq_allocated = true;
-@@ -871,15 +880,14 @@ static int brcmf_pcie_request_irq(struct
-
- static void brcmf_pcie_release_irq(struct brcmf_pciedev_info *devinfo)
- {
-- struct pci_dev *pdev;
-+ struct pci_dev *pdev = devinfo->pdev;
-+ struct brcmf_bus *bus = dev_get_drvdata(&pdev->dev);
- u32 status;
- u32 count;
-
- if (!devinfo->irq_allocated)
- return;
-
-- pdev = devinfo->pdev;
--
- brcmf_pcie_intr_disable(devinfo);
- free_irq(pdev->irq, devinfo);
- pci_disable_msi(pdev);
-@@ -891,7 +899,7 @@ static void brcmf_pcie_release_irq(struc
- count++;
- }
- if (devinfo->in_irq)
-- brcmf_err("Still in IRQ (processing) !!!\n");
-+ brcmf_err(bus, "Still in IRQ (processing) !!!\n");
-
- status = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT);
- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT, status);
-@@ -1102,6 +1110,7 @@ static void brcmf_pcie_release_ringbuffe
-
- static int brcmf_pcie_init_ringbuffers(struct brcmf_pciedev_info *devinfo)
- {
-+ struct brcmf_bus *bus = dev_get_drvdata(&devinfo->pdev->dev);
- struct brcmf_pcie_ringbuf *ring;
- struct brcmf_pcie_ringbuf *rings;
- u32 d2h_w_idx_ptr;
-@@ -1254,7 +1263,7 @@ static int brcmf_pcie_init_ringbuffers(s
- return 0;
-
- fail:
-- brcmf_err("Allocating ring buffers failed\n");
-+ brcmf_err(bus, "Allocating ring buffers failed\n");
- brcmf_pcie_release_ringbuffers(devinfo);
- return -ENOMEM;
- }
-@@ -1277,6 +1286,7 @@ brcmf_pcie_release_scratchbuffers(struct
-
- static int brcmf_pcie_init_scratchbuffers(struct brcmf_pciedev_info *devinfo)
- {
-+ struct brcmf_bus *bus = dev_get_drvdata(&devinfo->pdev->dev);
- u64 address;
- u32 addr;
-
-@@ -1316,7 +1326,7 @@ static int brcmf_pcie_init_scratchbuffer
- return 0;
-
- fail:
-- brcmf_err("Allocating scratch buffers failed\n");
-+ brcmf_err(bus, "Allocating scratch buffers failed\n");
- brcmf_pcie_release_scratchbuffers(devinfo);
- return -ENOMEM;
- }
-@@ -1437,6 +1447,7 @@ static int
- brcmf_pcie_init_share_ram_info(struct brcmf_pciedev_info *devinfo,
- u32 sharedram_addr)
- {
-+ struct brcmf_bus *bus = dev_get_drvdata(&devinfo->pdev->dev);
- struct brcmf_pcie_shared_info *shared;
- u32 addr;
-
-@@ -1448,7 +1459,8 @@ brcmf_pcie_init_share_ram_info(struct br
- brcmf_dbg(PCIE, "PCIe protocol version %d\n", shared->version);
- if ((shared->version > BRCMF_PCIE_MAX_SHARED_VERSION) ||
- (shared->version < BRCMF_PCIE_MIN_SHARED_VERSION)) {
-- brcmf_err("Unsupported PCIE version %d\n", shared->version);
-+ brcmf_err(bus, "Unsupported PCIE version %d\n",
-+ shared->version);
- return -EINVAL;
- }
-
-@@ -1490,6 +1502,7 @@ static int brcmf_pcie_download_fw_nvram(
- const struct firmware *fw, void *nvram,
- u32 nvram_len)
- {
-+ struct brcmf_bus *bus = dev_get_drvdata(&devinfo->pdev->dev);
- u32 sharedram_addr;
- u32 sharedram_addr_written;
- u32 loop_counter;
-@@ -1544,7 +1557,7 @@ static int brcmf_pcie_download_fw_nvram(
- loop_counter--;
- }
- if (sharedram_addr == sharedram_addr_written) {
-- brcmf_err("FW failed to initialize\n");
-+ brcmf_err(bus, "FW failed to initialize\n");
- return -ENODEV;
- }
- brcmf_dbg(PCIE, "Shared RAM addr: 0x%08x\n", sharedram_addr);
-@@ -1555,16 +1568,15 @@ static int brcmf_pcie_download_fw_nvram(
-
- static int brcmf_pcie_get_resource(struct brcmf_pciedev_info *devinfo)
- {
-- struct pci_dev *pdev;
-+ struct pci_dev *pdev = devinfo->pdev;
-+ struct brcmf_bus *bus = dev_get_drvdata(&pdev->dev);
- int err;
- phys_addr_t bar0_addr, bar1_addr;
- ulong bar1_size;
-
-- pdev = devinfo->pdev;
--
- err = pci_enable_device(pdev);
- if (err) {
-- brcmf_err("pci_enable_device failed err=%d\n", err);
-+ brcmf_err(bus, "pci_enable_device failed err=%d\n", err);
- return err;
- }
-
-@@ -1577,7 +1589,7 @@ static int brcmf_pcie_get_resource(struc
- /* read Bar-1 mapped memory range */
- bar1_size = pci_resource_len(pdev, 2);
- if ((bar1_size == 0) || (bar1_addr == 0)) {
-- brcmf_err("BAR1 Not enabled, device size=%ld, addr=%#016llx\n",
-+ brcmf_err(bus, "BAR1 Not enabled, device size=%ld, addr=%#016llx\n",
- bar1_size, (unsigned long long)bar1_addr);
- return -EINVAL;
- }
-@@ -1586,7 +1598,7 @@ static int brcmf_pcie_get_resource(struc
- devinfo->tcm = ioremap_nocache(bar1_addr, bar1_size);
-
- if (!devinfo->regs || !devinfo->tcm) {
-- brcmf_err("ioremap() failed (%p,%p)\n", devinfo->regs,
-+ brcmf_err(bus, "ioremap() failed (%p,%p)\n", devinfo->regs,
- devinfo->tcm);
- return -EINVAL;
- }
-@@ -1873,7 +1885,7 @@ fail_bus:
- kfree(bus->msgbuf);
- kfree(bus);
- fail:
-- brcmf_err("failed %x:%x\n", pdev->vendor, pdev->device);
-+ brcmf_err(NULL, "failed %x:%x\n", pdev->vendor, pdev->device);
- brcmf_pcie_release_resource(devinfo);
- if (devinfo->ci)
- brcmf_chip_detach(devinfo->ci);
-@@ -1947,7 +1959,7 @@ static int brcmf_pcie_pm_enter_D3(struct
- wait_event_timeout(devinfo->mbdata_resp_wait, devinfo->mbdata_completed,
- BRCMF_PCIE_MBDATA_TIMEOUT);
- if (!devinfo->mbdata_completed) {
-- brcmf_err("Timeout on response for entering D3 substate\n");
-+ brcmf_err(bus, "Timeout on response for entering D3 substate\n");
- brcmf_bus_change_state(bus, BRCMF_BUS_UP);
- return -EIO;
- }
-@@ -1993,7 +2005,7 @@ cleanup:
-
- err = brcmf_pcie_probe(pdev, NULL);
- if (err)
-- brcmf_err("probe after resume failed, err=%d\n", err);
-+ brcmf_err(bus, "probe after resume failed, err=%d\n", err);
-
- return err;
- }
-@@ -2066,7 +2078,8 @@ void brcmf_pcie_register(void)
- brcmf_dbg(PCIE, "Enter\n");
- err = pci_register_driver(&brcmf_pciedrvr);
- if (err)
-- brcmf_err("PCIE driver registration failed, err=%d\n", err);
-+ brcmf_err(NULL, "PCIE driver registration failed, err=%d\n",
-+ err);
- }
-
-
diff --git a/package/kernel/mac80211/patches/brcm/346-v5.1-brcmfmac-add-bphy_err-and-use-it-in-the-cfg80211.c.patch b/package/kernel/mac80211/patches/brcm/346-v5.1-brcmfmac-add-bphy_err-and-use-it-in-the-cfg80211.c.patch
deleted file mode 100644
index efd77d4c00..0000000000
--- a/package/kernel/mac80211/patches/brcm/346-v5.1-brcmfmac-add-bphy_err-and-use-it-in-the-cfg80211.c.patch
+++ /dev/null
@@ -1,2025 +0,0 @@
-From 3ef005b82e2ad68107fc5814eaa743d171a6c362 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 16 Jan 2019 07:28:54 +0100
-Subject: [PATCH] brcmfmac: add bphy_err() and use it in the cfg80211.c
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This new macro uses wiphy_err() which:
-1) Should be the best choice with wiphy already created
-2) Uses dev_err() which allows identifying error-affected device
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 497 ++++++++++--------
- .../broadcom/brcm80211/brcmfmac/debug.h | 9 +
- 2 files changed, 282 insertions(+), 224 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -457,6 +457,7 @@ static void convert_key_from_CPU(struct
- static int
- send_key_to_dongle(struct brcmf_if *ifp, struct brcmf_wsec_key *key)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- int err;
- struct brcmf_wsec_key_le key_le;
-
-@@ -468,7 +469,7 @@ send_key_to_dongle(struct brcmf_if *ifp,
- sizeof(key_le));
-
- if (err)
-- brcmf_err("wsec_key error (%d)\n", err);
-+ bphy_err(wiphy, "wsec_key error (%d)\n", err);
- return err;
- }
-
-@@ -508,6 +509,7 @@ static int brcmf_get_first_free_bsscfgid
-
- static int brcmf_cfg80211_request_ap_if(struct brcmf_if *ifp)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_mbss_ssid_le mbss_ssid_le;
- int bsscfgidx;
- int err;
-@@ -524,7 +526,7 @@ static int brcmf_cfg80211_request_ap_if(
- err = brcmf_fil_bsscfg_data_set(ifp, "bsscfg:ssid", &mbss_ssid_le,
- sizeof(mbss_ssid_le));
- if (err < 0)
-- brcmf_err("setting ssid failed %d\n", err);
-+ bphy_err(wiphy, "setting ssid failed %d\n", err);
-
- return err;
- }
-@@ -567,7 +569,7 @@ struct wireless_dev *brcmf_ap_add_vif(st
- BRCMF_VIF_EVENT_TIMEOUT);
- brcmf_cfg80211_arm_vif_event(cfg, NULL);
- if (!err) {
-- brcmf_err("timeout occurred\n");
-+ bphy_err(wiphy, "timeout occurred\n");
- err = -EIO;
- goto fail;
- }
-@@ -575,7 +577,7 @@ struct wireless_dev *brcmf_ap_add_vif(st
- /* interface created in firmware */
- ifp = vif->ifp;
- if (!ifp) {
-- brcmf_err("no if pointer provided\n");
-+ bphy_err(wiphy, "no if pointer provided\n");
- err = -ENOENT;
- goto fail;
- }
-@@ -583,7 +585,7 @@ struct wireless_dev *brcmf_ap_add_vif(st
- strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1);
- err = brcmf_net_attach(ifp, true);
- if (err) {
-- brcmf_err("Registering netdevice failed\n");
-+ bphy_err(wiphy, "Registering netdevice failed\n");
- free_netdev(ifp->ndev);
- goto fail;
- }
-@@ -620,7 +622,7 @@ static struct wireless_dev *brcmf_cfg802
- brcmf_dbg(TRACE, "enter: %s type %d\n", name, type);
- err = brcmf_vif_add_validate(wiphy_to_cfg(wiphy), type);
- if (err) {
-- brcmf_err("iface validation failed: err=%d\n", err);
-+ bphy_err(wiphy, "iface validation failed: err=%d\n", err);
- return ERR_PTR(err);
- }
- switch (type) {
-@@ -645,8 +647,8 @@ static struct wireless_dev *brcmf_cfg802
- }
-
- if (IS_ERR(wdev))
-- brcmf_err("add iface %s type %d failed: err=%d\n",
-- name, type, (int)PTR_ERR(wdev));
-+ bphy_err(wiphy, "add iface %s type %d failed: err=%d\n", name,
-+ type, (int)PTR_ERR(wdev));
- else
- brcmf_cfg80211_update_proto_addr_mode(wdev);
-
-@@ -661,12 +663,13 @@ static void brcmf_scan_config_mpc(struct
-
- void brcmf_set_mpc(struct brcmf_if *ifp, int mpc)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- s32 err = 0;
-
- if (check_vif_up(ifp->vif)) {
- err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc);
- if (err) {
-- brcmf_err("fail to set mpc\n");
-+ bphy_err(wiphy, "fail to set mpc\n");
- return;
- }
- brcmf_dbg(INFO, "MPC : %d\n", mpc);
-@@ -677,6 +680,7 @@ s32 brcmf_notify_escan_complete(struct b
- struct brcmf_if *ifp, bool aborted,
- bool fw_abort)
- {
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- struct brcmf_scan_params_le params_le;
- struct cfg80211_scan_request *scan_request;
- u64 reqid;
-@@ -711,7 +715,7 @@ s32 brcmf_notify_escan_complete(struct b
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN,
- &params_le, sizeof(params_le));
- if (err)
-- brcmf_err("Scan abort failed\n");
-+ bphy_err(wiphy, "Scan abort failed\n");
- }
-
- brcmf_scan_config_mpc(ifp, 1);
-@@ -763,7 +767,7 @@ static int brcmf_cfg80211_del_ap_iface(s
-
- err = brcmf_fil_bsscfg_data_set(ifp, "interface_remove", NULL, 0);
- if (err) {
-- brcmf_err("interface_remove failed %d\n", err);
-+ bphy_err(wiphy, "interface_remove failed %d\n", err);
- goto err_unarm;
- }
-
-@@ -771,7 +775,7 @@ static int brcmf_cfg80211_del_ap_iface(s
- ret = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_DEL,
- BRCMF_VIF_EVENT_TIMEOUT);
- if (!ret) {
-- brcmf_err("timeout occurred\n");
-+ bphy_err(wiphy, "timeout occurred\n");
- err = -EIO;
- goto err_unarm;
- }
-@@ -873,14 +877,14 @@ brcmf_cfg80211_change_iface(struct wiphy
- }
- err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type);
- if (err) {
-- brcmf_err("iface validation failed: err=%d\n", err);
-+ bphy_err(wiphy, "iface validation failed: err=%d\n", err);
- return err;
- }
- switch (type) {
- case NL80211_IFTYPE_MONITOR:
- case NL80211_IFTYPE_WDS:
-- brcmf_err("type (%d) : currently we do not support this type\n",
-- type);
-+ bphy_err(wiphy, "type (%d) : currently we do not support this type\n",
-+ type);
- return -EOPNOTSUPP;
- case NL80211_IFTYPE_ADHOC:
- infra = 0;
-@@ -908,7 +912,7 @@ brcmf_cfg80211_change_iface(struct wiphy
- } else {
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, infra);
- if (err) {
-- brcmf_err("WLC_SET_INFRA error (%d)\n", err);
-+ bphy_err(wiphy, "WLC_SET_INFRA error (%d)\n", err);
- err = -EAGAIN;
- goto done;
- }
-@@ -999,6 +1003,7 @@ static s32
- brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp,
- struct cfg80211_scan_request *request)
- {
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- s32 params_size = BRCMF_SCAN_PARAMS_FIXED_SIZE +
- offsetof(struct brcmf_escan_params_le, params_le);
- struct brcmf_escan_params_le *params;
-@@ -1030,7 +1035,7 @@ brcmf_run_escan(struct brcmf_cfg80211_in
- if (err == -EBUSY)
- brcmf_dbg(INFO, "system busy : escan canceled\n");
- else
-- brcmf_err("error (%d)\n", err);
-+ bphy_err(wiphy, "error (%d)\n", err);
- }
-
- kfree(params);
-@@ -1076,21 +1081,22 @@ brcmf_cfg80211_scan(struct wiphy *wiphy,
- return -EIO;
-
- if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
-- brcmf_err("Scanning already: status (%lu)\n", cfg->scan_status);
-+ bphy_err(wiphy, "Scanning already: status (%lu)\n",
-+ cfg->scan_status);
- return -EAGAIN;
- }
- if (test_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status)) {
-- brcmf_err("Scanning being aborted: status (%lu)\n",
-- cfg->scan_status);
-+ bphy_err(wiphy, "Scanning being aborted: status (%lu)\n",
-+ cfg->scan_status);
- return -EAGAIN;
- }
- if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) {
-- brcmf_err("Scanning suppressed: status (%lu)\n",
-- cfg->scan_status);
-+ bphy_err(wiphy, "Scanning suppressed: status (%lu)\n",
-+ cfg->scan_status);
- return -EAGAIN;
- }
- if (test_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state)) {
-- brcmf_err("Connecting: status (%lu)\n", vif->sme_state);
-+ bphy_err(wiphy, "Connecting: status (%lu)\n", vif->sme_state);
- return -EAGAIN;
- }
-
-@@ -1124,7 +1130,7 @@ brcmf_cfg80211_scan(struct wiphy *wiphy,
- return 0;
-
- scan_out:
-- brcmf_err("scan error (%d)\n", err);
-+ bphy_err(wiphy, "scan error (%d)\n", err);
- clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
- cfg->scan_request = NULL;
- return err;
-@@ -1132,36 +1138,41 @@ scan_out:
-
- static s32 brcmf_set_rts(struct net_device *ndev, u32 rts_threshold)
- {
-+ struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- s32 err = 0;
-
-- err = brcmf_fil_iovar_int_set(netdev_priv(ndev), "rtsthresh",
-- rts_threshold);
-+ err = brcmf_fil_iovar_int_set(ifp, "rtsthresh", rts_threshold);
- if (err)
-- brcmf_err("Error (%d)\n", err);
-+ bphy_err(wiphy, "Error (%d)\n", err);
-
- return err;
- }
-
- static s32 brcmf_set_frag(struct net_device *ndev, u32 frag_threshold)
- {
-+ struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- s32 err = 0;
-
-- err = brcmf_fil_iovar_int_set(netdev_priv(ndev), "fragthresh",
-+ err = brcmf_fil_iovar_int_set(ifp, "fragthresh",
- frag_threshold);
- if (err)
-- brcmf_err("Error (%d)\n", err);
-+ bphy_err(wiphy, "Error (%d)\n", err);
-
- return err;
- }
-
- static s32 brcmf_set_retry(struct net_device *ndev, u32 retry, bool l)
- {
-+ struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- s32 err = 0;
- u32 cmd = (l ? BRCMF_C_SET_LRL : BRCMF_C_SET_SRL);
-
-- err = brcmf_fil_cmd_int_set(netdev_priv(ndev), cmd, retry);
-+ err = brcmf_fil_cmd_int_set(ifp, cmd, retry);
- if (err) {
-- brcmf_err("cmd (%d) , error (%d)\n", cmd, err);
-+ bphy_err(wiphy, "cmd (%d) , error (%d)\n", cmd, err);
- return err;
- }
- return err;
-@@ -1237,6 +1248,7 @@ static u16 brcmf_map_fw_linkdown_reason(
-
- static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_wsec_pmk_le pmk;
- int i, err;
-
-@@ -1250,8 +1262,8 @@ static int brcmf_set_pmk(struct brcmf_if
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_WSEC_PMK,
- &pmk, sizeof(pmk));
- if (err < 0)
-- brcmf_err("failed to change PSK in firmware (len=%u)\n",
-- pmk_len);
-+ bphy_err(wiphy, "failed to change PSK in firmware (len=%u)\n",
-+ pmk_len);
-
- return err;
- }
-@@ -1259,6 +1271,7 @@ static int brcmf_set_pmk(struct brcmf_if
- static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason)
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- s32 err = 0;
-
- brcmf_dbg(TRACE, "Enter\n");
-@@ -1268,7 +1281,7 @@ static void brcmf_link_down(struct brcmf
- err = brcmf_fil_cmd_data_set(vif->ifp,
- BRCMF_C_DISASSOC, NULL, 0);
- if (err) {
-- brcmf_err("WLC_DISASSOC failed (%d)\n", err);
-+ bphy_err(wiphy, "WLC_DISASSOC failed (%d)\n", err);
- }
- if ((vif->wdev.iftype == NL80211_IFTYPE_STATION) ||
- (vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT))
-@@ -1356,7 +1369,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
-
- err = brcmf_fil_iovar_int_set(ifp, "wsec", wsec);
- if (err) {
-- brcmf_err("wsec failed (%d)\n", err);
-+ bphy_err(wiphy, "wsec failed (%d)\n", err);
- goto done;
- }
-
-@@ -1368,7 +1381,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, bcnprd);
- if (err) {
-- brcmf_err("WLC_SET_BCNPRD failed (%d)\n", err);
-+ bphy_err(wiphy, "WLC_SET_BCNPRD failed (%d)\n", err);
- goto done;
- }
-
-@@ -1413,7 +1426,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_CHANNEL,
- target_channel);
- if (err) {
-- brcmf_err("WLC_SET_CHANNEL failed (%d)\n", err);
-+ bphy_err(wiphy, "WLC_SET_CHANNEL failed (%d)\n", err);
- goto done;
- }
- } else
-@@ -1425,7 +1438,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
- &join_params, join_params_size);
- if (err) {
-- brcmf_err("WLC_SET_SSID failed (%d)\n", err);
-+ bphy_err(wiphy, "WLC_SET_SSID failed (%d)\n", err);
- goto done;
- }
-
-@@ -1461,6 +1474,8 @@ brcmf_cfg80211_leave_ibss(struct wiphy *
- static s32 brcmf_set_wpa_version(struct net_device *ndev,
- struct cfg80211_connect_params *sme)
- {
-+ struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
- struct brcmf_cfg80211_security *sec;
- s32 val = 0;
-@@ -1473,9 +1488,9 @@ static s32 brcmf_set_wpa_version(struct
- else
- val = WPA_AUTH_DISABLED;
- brcmf_dbg(CONN, "setting wpa_auth to 0x%0x\n", val);
-- err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val);
-+ err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", val);
- if (err) {
-- brcmf_err("set wpa_auth failed (%d)\n", err);
-+ bphy_err(wiphy, "set wpa_auth failed (%d)\n", err);
- return err;
- }
- sec = &profile->sec;
-@@ -1486,6 +1501,8 @@ static s32 brcmf_set_wpa_version(struct
- static s32 brcmf_set_auth_type(struct net_device *ndev,
- struct cfg80211_connect_params *sme)
- {
-+ struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
- struct brcmf_cfg80211_security *sec;
- s32 val = 0;
-@@ -1506,9 +1523,9 @@ static s32 brcmf_set_auth_type(struct ne
- break;
- }
-
-- err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "auth", val);
-+ err = brcmf_fil_bsscfg_int_set(ifp, "auth", val);
- if (err) {
-- brcmf_err("set auth failed (%d)\n", err);
-+ bphy_err(wiphy, "set auth failed (%d)\n", err);
- return err;
- }
- sec = &profile->sec;
-@@ -1520,6 +1537,8 @@ static s32
- brcmf_set_wsec_mode(struct net_device *ndev,
- struct cfg80211_connect_params *sme)
- {
-+ struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
- struct brcmf_cfg80211_security *sec;
- s32 pval = 0;
-@@ -1543,8 +1562,8 @@ brcmf_set_wsec_mode(struct net_device *n
- pval = AES_ENABLED;
- break;
- default:
-- brcmf_err("invalid cipher pairwise (%d)\n",
-- sme->crypto.ciphers_pairwise[0]);
-+ bphy_err(wiphy, "invalid cipher pairwise (%d)\n",
-+ sme->crypto.ciphers_pairwise[0]);
- return -EINVAL;
- }
- }
-@@ -1564,8 +1583,8 @@ brcmf_set_wsec_mode(struct net_device *n
- gval = AES_ENABLED;
- break;
- default:
-- brcmf_err("invalid cipher group (%d)\n",
-- sme->crypto.cipher_group);
-+ bphy_err(wiphy, "invalid cipher group (%d)\n",
-+ sme->crypto.cipher_group);
- return -EINVAL;
- }
- }
-@@ -1578,9 +1597,9 @@ brcmf_set_wsec_mode(struct net_device *n
- pval = AES_ENABLED;
-
- wsec = pval | gval;
-- err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", wsec);
-+ err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
- if (err) {
-- brcmf_err("error (%d)\n", err);
-+ bphy_err(wiphy, "error (%d)\n", err);
- return err;
- }
-
-@@ -1595,6 +1614,7 @@ static s32
- brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
- s32 val;
- s32 err;
-@@ -1613,7 +1633,7 @@ brcmf_set_key_mgmt(struct net_device *nd
-
- err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), "wpa_auth", &val);
- if (err) {
-- brcmf_err("could not get wpa_auth (%d)\n", err);
-+ bphy_err(wiphy, "could not get wpa_auth (%d)\n", err);
- return err;
- }
- if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) {
-@@ -1627,8 +1647,8 @@ brcmf_set_key_mgmt(struct net_device *nd
- val = WPA_AUTH_PSK;
- break;
- default:
-- brcmf_err("invalid cipher group (%d)\n",
-- sme->crypto.cipher_group);
-+ bphy_err(wiphy, "invalid cipher group (%d)\n",
-+ sme->crypto.cipher_group);
- return -EINVAL;
- }
- } else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) {
-@@ -1650,8 +1670,8 @@ brcmf_set_key_mgmt(struct net_device *nd
- val = WPA2_AUTH_PSK;
- break;
- default:
-- brcmf_err("invalid cipher group (%d)\n",
-- sme->crypto.cipher_group);
-+ bphy_err(wiphy, "invalid cipher group (%d)\n",
-+ sme->crypto.cipher_group);
- return -EINVAL;
- }
- }
-@@ -1697,7 +1717,7 @@ skip_mfp_config:
- brcmf_dbg(CONN, "setting wpa_auth to %d\n", val);
- err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val);
- if (err) {
-- brcmf_err("could not set wpa_auth (%d)\n", err);
-+ bphy_err(wiphy, "could not set wpa_auth (%d)\n", err);
- return err;
- }
-
-@@ -1708,6 +1728,8 @@ static s32
- brcmf_set_sharedkey(struct net_device *ndev,
- struct cfg80211_connect_params *sme)
- {
-+ struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
- struct brcmf_cfg80211_security *sec;
- struct brcmf_wsec_key key;
-@@ -1734,7 +1756,7 @@ brcmf_set_sharedkey(struct net_device *n
- key.len = (u32) sme->key_len;
- key.index = (u32) sme->key_idx;
- if (key.len > sizeof(key.data)) {
-- brcmf_err("Too long key length (%u)\n", key.len);
-+ bphy_err(wiphy, "Too long key length (%u)\n", key.len);
- return -EINVAL;
- }
- memcpy(key.data, sme->key, key.len);
-@@ -1747,24 +1769,24 @@ brcmf_set_sharedkey(struct net_device *n
- key.algo = CRYPTO_ALGO_WEP128;
- break;
- default:
-- brcmf_err("Invalid algorithm (%d)\n",
-- sme->crypto.ciphers_pairwise[0]);
-+ bphy_err(wiphy, "Invalid algorithm (%d)\n",
-+ sme->crypto.ciphers_pairwise[0]);
- return -EINVAL;
- }
- /* Set the new key/index */
- brcmf_dbg(CONN, "key length (%d) key index (%d) algo (%d)\n",
- key.len, key.index, key.algo);
- brcmf_dbg(CONN, "key \"%s\"\n", key.data);
-- err = send_key_to_dongle(netdev_priv(ndev), &key);
-+ err = send_key_to_dongle(ifp, &key);
- if (err)
- return err;
-
- if (sec->auth_type == NL80211_AUTHTYPE_SHARED_KEY) {
- brcmf_dbg(CONN, "set auth_type to shared key\n");
- val = WL_AUTH_SHARED_KEY; /* shared key */
-- err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "auth", val);
-+ err = brcmf_fil_bsscfg_int_set(ifp, "auth", val);
- if (err)
-- brcmf_err("set auth failed (%d)\n", err);
-+ bphy_err(wiphy, "set auth failed (%d)\n", err);
- }
- return err;
- }
-@@ -1784,6 +1806,7 @@ enum nl80211_auth_type brcmf_war_auth_ty
- static void brcmf_set_join_pref(struct brcmf_if *ifp,
- struct cfg80211_bss_selection *bss_select)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_join_pref_params join_pref_params[2];
- enum nl80211_band band;
- int err, i = 0;
-@@ -1822,7 +1845,7 @@ static void brcmf_set_join_pref(struct b
- err = brcmf_fil_iovar_data_set(ifp, "join_pref", join_pref_params,
- sizeof(join_pref_params));
- if (err)
-- brcmf_err("Set join_pref error (%d)\n", err);
-+ bphy_err(wiphy, "Set join_pref error (%d)\n", err);
- }
-
- static s32
-@@ -1849,7 +1872,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
- return -EIO;
-
- if (!sme->ssid) {
-- brcmf_err("Invalid ssid\n");
-+ bphy_err(wiphy, "Invalid ssid\n");
- return -EOPNOTSUPP;
- }
-
-@@ -1878,7 +1901,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
- err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG,
- sme->ie, sme->ie_len);
- if (err)
-- brcmf_err("Set Assoc REQ IE Failed\n");
-+ bphy_err(wiphy, "Set Assoc REQ IE Failed\n");
- else
- brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n");
-
-@@ -1899,32 +1922,32 @@ brcmf_cfg80211_connect(struct wiphy *wip
-
- err = brcmf_set_wpa_version(ndev, sme);
- if (err) {
-- brcmf_err("wl_set_wpa_version failed (%d)\n", err);
-+ bphy_err(wiphy, "wl_set_wpa_version failed (%d)\n", err);
- goto done;
- }
-
- sme->auth_type = brcmf_war_auth_type(ifp, sme->auth_type);
- err = brcmf_set_auth_type(ndev, sme);
- if (err) {
-- brcmf_err("wl_set_auth_type failed (%d)\n", err);
-+ bphy_err(wiphy, "wl_set_auth_type failed (%d)\n", err);
- goto done;
- }
-
- err = brcmf_set_wsec_mode(ndev, sme);
- if (err) {
-- brcmf_err("wl_set_set_cipher failed (%d)\n", err);
-+ bphy_err(wiphy, "wl_set_set_cipher failed (%d)\n", err);
- goto done;
- }
-
- err = brcmf_set_key_mgmt(ndev, sme);
- if (err) {
-- brcmf_err("wl_set_key_mgmt failed (%d)\n", err);
-+ bphy_err(wiphy, "wl_set_key_mgmt failed (%d)\n", err);
- goto done;
- }
-
- err = brcmf_set_sharedkey(ndev, sme);
- if (err) {
-- brcmf_err("brcmf_set_sharedkey failed (%d)\n", err);
-+ bphy_err(wiphy, "brcmf_set_sharedkey failed (%d)\n", err);
- goto done;
- }
-
-@@ -1941,7 +1964,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
- /* enable firmware supplicant for this interface */
- err = brcmf_fil_iovar_int_set(ifp, "sup_wpa", 1);
- if (err < 0) {
-- brcmf_err("failed to enable fw supplicant\n");
-+ bphy_err(wiphy, "failed to enable fw supplicant\n");
- goto done;
- }
- }
-@@ -2036,7 +2059,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
- &join_params, join_params_size);
- if (err)
-- brcmf_err("BRCMF_C_SET_SSID failed (%d)\n", err);
-+ bphy_err(wiphy, "BRCMF_C_SET_SSID failed (%d)\n", err);
-
- done:
- if (err)
-@@ -2067,7 +2090,7 @@ brcmf_cfg80211_disconnect(struct wiphy *
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_DISASSOC,
- &scbval, sizeof(scbval));
- if (err)
-- brcmf_err("error (%d)\n", err);
-+ bphy_err(wiphy, "error (%d)\n", err);
-
- brcmf_dbg(TRACE, "Exit\n");
- return err;
-@@ -2094,7 +2117,7 @@ brcmf_cfg80211_set_tx_power(struct wiphy
- case NL80211_TX_POWER_LIMITED:
- case NL80211_TX_POWER_FIXED:
- if (mbm < 0) {
-- brcmf_err("TX_POWER_FIXED - dbm is negative\n");
-+ bphy_err(wiphy, "TX_POWER_FIXED - dbm is negative\n");
- err = -EINVAL;
- goto done;
- }
-@@ -2104,7 +2127,7 @@ brcmf_cfg80211_set_tx_power(struct wiphy
- qdbm |= WL_TXPWR_OVERRIDE;
- break;
- default:
-- brcmf_err("Unsupported type %d\n", type);
-+ bphy_err(wiphy, "Unsupported type %d\n", type);
- err = -EINVAL;
- goto done;
- }
-@@ -2112,11 +2135,11 @@ brcmf_cfg80211_set_tx_power(struct wiphy
- disable = WL_RADIO_SW_DISABLE << 16;
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_RADIO, disable);
- if (err)
-- brcmf_err("WLC_SET_RADIO error (%d)\n", err);
-+ bphy_err(wiphy, "WLC_SET_RADIO error (%d)\n", err);
-
- err = brcmf_fil_iovar_int_set(ifp, "qtxpower", qdbm);
- if (err)
-- brcmf_err("qtxpower error (%d)\n", err);
-+ bphy_err(wiphy, "qtxpower error (%d)\n", err);
-
- done:
- brcmf_dbg(TRACE, "Exit %d (qdbm)\n", qdbm & ~WL_TXPWR_OVERRIDE);
-@@ -2137,7 +2160,7 @@ brcmf_cfg80211_get_tx_power(struct wiphy
-
- err = brcmf_fil_iovar_int_get(vif->ifp, "qtxpower", &qdbm);
- if (err) {
-- brcmf_err("error (%d)\n", err);
-+ bphy_err(wiphy, "error (%d)\n", err);
- goto done;
- }
- *dbm = (qdbm & ~WL_TXPWR_OVERRIDE) / 4;
-@@ -2163,7 +2186,7 @@ brcmf_cfg80211_config_default_key(struct
-
- err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
- if (err) {
-- brcmf_err("WLC_GET_WSEC error (%d)\n", err);
-+ bphy_err(wiphy, "WLC_GET_WSEC error (%d)\n", err);
- goto done;
- }
-
-@@ -2173,7 +2196,7 @@ brcmf_cfg80211_config_default_key(struct
- err = brcmf_fil_cmd_int_set(ifp,
- BRCMF_C_SET_KEY_PRIMARY, index);
- if (err)
-- brcmf_err("error (%d)\n", err);
-+ bphy_err(wiphy, "error (%d)\n", err);
- }
- done:
- brcmf_dbg(TRACE, "Exit\n");
-@@ -2237,7 +2260,7 @@ brcmf_cfg80211_add_key(struct wiphy *wip
-
- if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) {
- /* we ignore this key index in this case */
-- brcmf_err("invalid key index (%d)\n", key_idx);
-+ bphy_err(wiphy, "invalid key index (%d)\n", key_idx);
- return -EINVAL;
- }
-
-@@ -2246,7 +2269,7 @@ brcmf_cfg80211_add_key(struct wiphy *wip
- mac_addr);
-
- if (params->key_len > sizeof(key->data)) {
-- brcmf_err("Too long key length (%u)\n", params->key_len);
-+ bphy_err(wiphy, "Too long key length (%u)\n", params->key_len);
- return -EINVAL;
- }
-
-@@ -2300,7 +2323,7 @@ brcmf_cfg80211_add_key(struct wiphy *wip
- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_CCMP\n");
- break;
- default:
-- brcmf_err("Invalid cipher (0x%x)\n", params->cipher);
-+ bphy_err(wiphy, "Invalid cipher (0x%x)\n", params->cipher);
- err = -EINVAL;
- goto done;
- }
-@@ -2311,13 +2334,13 @@ brcmf_cfg80211_add_key(struct wiphy *wip
-
- err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
- if (err) {
-- brcmf_err("get wsec error (%d)\n", err);
-+ bphy_err(wiphy, "get wsec error (%d)\n", err);
- goto done;
- }
- wsec |= val;
- err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
- if (err) {
-- brcmf_err("set wsec error (%d)\n", err);
-+ bphy_err(wiphy, "set wsec error (%d)\n", err);
- goto done;
- }
-
-@@ -2348,7 +2371,7 @@ brcmf_cfg80211_get_key(struct wiphy *wip
-
- err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
- if (err) {
-- brcmf_err("WLC_GET_WSEC error (%d)\n", err);
-+ bphy_err(wiphy, "WLC_GET_WSEC error (%d)\n", err);
- /* Ignore this error, may happen during DISASSOC */
- err = -EAGAIN;
- goto done;
-@@ -2369,7 +2392,7 @@ brcmf_cfg80211_get_key(struct wiphy *wip
- params.cipher = WLAN_CIPHER_SUITE_AES_CMAC;
- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n");
- } else {
-- brcmf_err("Invalid algo (0x%x)\n", wsec);
-+ bphy_err(wiphy, "Invalid algo (0x%x)\n", wsec);
- err = -EINVAL;
- goto done;
- }
-@@ -2399,6 +2422,7 @@ brcmf_cfg80211_config_default_mgmt_key(s
- static void
- brcmf_cfg80211_reconfigure_wep(struct brcmf_if *ifp)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- s32 err;
- u8 key_idx;
- struct brcmf_wsec_key *key;
-@@ -2415,18 +2439,18 @@ brcmf_cfg80211_reconfigure_wep(struct br
-
- err = send_key_to_dongle(ifp, key);
- if (err) {
-- brcmf_err("Setting WEP key failed (%d)\n", err);
-+ bphy_err(wiphy, "Setting WEP key failed (%d)\n", err);
- return;
- }
- err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
- if (err) {
-- brcmf_err("get wsec error (%d)\n", err);
-+ bphy_err(wiphy, "get wsec error (%d)\n", err);
- return;
- }
- wsec |= WEP_ENABLED;
- err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
- if (err)
-- brcmf_err("set wsec error (%d)\n", err);
-+ bphy_err(wiphy, "set wsec error (%d)\n", err);
- }
-
- static void brcmf_convert_sta_flags(u32 fw_sta_flags, struct station_info *si)
-@@ -2452,6 +2476,7 @@ static void brcmf_convert_sta_flags(u32
-
- static void brcmf_fill_bss_param(struct brcmf_if *ifp, struct station_info *si)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- struct {
- __le32 len;
- struct brcmf_bss_info_le bss_le;
-@@ -2467,7 +2492,7 @@ static void brcmf_fill_bss_param(struct
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, buf,
- WL_BSS_INFO_MAX);
- if (err) {
-- brcmf_err("Failed to get bss info (%d)\n", err);
-+ bphy_err(wiphy, "Failed to get bss info (%d)\n", err);
- goto out_kfree;
- }
- si->filled |= BIT_ULL(NL80211_STA_INFO_BSS_PARAM);
-@@ -2489,6 +2514,7 @@ static s32
- brcmf_cfg80211_get_station_ibss(struct brcmf_if *ifp,
- struct station_info *sinfo)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_scb_val_le scbval;
- struct brcmf_pktcnt_le pktcnt;
- s32 err;
-@@ -2498,7 +2524,7 @@ brcmf_cfg80211_get_station_ibss(struct b
- /* Get the current tx rate */
- err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate);
- if (err < 0) {
-- brcmf_err("BRCMF_C_GET_RATE error (%d)\n", err);
-+ bphy_err(wiphy, "BRCMF_C_GET_RATE error (%d)\n", err);
- return err;
- }
- sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
-@@ -2508,7 +2534,7 @@ brcmf_cfg80211_get_station_ibss(struct b
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI, &scbval,
- sizeof(scbval));
- if (err) {
-- brcmf_err("BRCMF_C_GET_RSSI error (%d)\n", err);
-+ bphy_err(wiphy, "BRCMF_C_GET_RSSI error (%d)\n", err);
- return err;
- }
- rssi = le32_to_cpu(scbval.val);
-@@ -2518,7 +2544,7 @@ brcmf_cfg80211_get_station_ibss(struct b
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_GET_PKTCNTS, &pktcnt,
- sizeof(pktcnt));
- if (err) {
-- brcmf_err("BRCMF_C_GET_GET_PKTCNTS error (%d)\n", err);
-+ bphy_err(wiphy, "BRCMF_C_GET_GET_PKTCNTS error (%d)\n", err);
- return err;
- }
- sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_PACKETS) |
-@@ -2566,7 +2592,7 @@ brcmf_cfg80211_get_station(struct wiphy
- &sta_info_le,
- sizeof(sta_info_le));
- if (err < 0) {
-- brcmf_err("GET STA INFO failed, %d\n", err);
-+ bphy_err(wiphy, "GET STA INFO failed, %d\n", err);
- goto done;
- }
- }
-@@ -2635,7 +2661,8 @@ brcmf_cfg80211_get_station(struct wiphy
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI,
- &scb_val, sizeof(scb_val));
- if (err) {
-- brcmf_err("Could not get rssi (%d)\n", err);
-+ bphy_err(wiphy, "Could not get rssi (%d)\n",
-+ err);
- goto done;
- } else {
- rssi = le32_to_cpu(scb_val.val);
-@@ -2666,8 +2693,8 @@ brcmf_cfg80211_dump_station(struct wiphy
- &cfg->assoclist,
- sizeof(cfg->assoclist));
- if (err) {
-- brcmf_err("BRCMF_C_GET_ASSOCLIST unsupported, err=%d\n",
-- err);
-+ bphy_err(wiphy, "BRCMF_C_GET_ASSOCLIST unsupported, err=%d\n",
-+ err);
- cfg->assoclist.count = 0;
- return -EOPNOTSUPP;
- }
-@@ -2715,9 +2742,9 @@ brcmf_cfg80211_set_power_mgmt(struct wip
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm);
- if (err) {
- if (err == -ENODEV)
-- brcmf_err("net_device is not ready yet\n");
-+ bphy_err(wiphy, "net_device is not ready yet\n");
- else
-- brcmf_err("error (%d)\n", err);
-+ bphy_err(wiphy, "error (%d)\n", err);
- }
- done:
- brcmf_dbg(TRACE, "Exit\n");
-@@ -2740,7 +2767,7 @@ static s32 brcmf_inform_single_bss(struc
- struct cfg80211_inform_bss bss_data = {};
-
- if (le32_to_cpu(bi->length) > WL_BSS_INFO_MAX) {
-- brcmf_err("Bss info is larger than buffer. Discarding\n");
-+ bphy_err(wiphy, "Bss info is larger than buffer. Discarding\n");
- return 0;
- }
-
-@@ -2799,6 +2826,7 @@ next_bss_le(struct brcmf_scan_results *l
-
- static s32 brcmf_inform_bss(struct brcmf_cfg80211_info *cfg)
- {
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- struct brcmf_scan_results *bss_list;
- struct brcmf_bss_info_le *bi = NULL; /* must be initialized */
- s32 err = 0;
-@@ -2807,8 +2835,8 @@ static s32 brcmf_inform_bss(struct brcmf
- bss_list = (struct brcmf_scan_results *)cfg->escan_info.escan_buf;
- if (bss_list->count != 0 &&
- bss_list->version != BRCMF_BSS_INFO_VERSION) {
-- brcmf_err("Version %d != WL_BSS_INFO_VERSION\n",
-- bss_list->version);
-+ bphy_err(wiphy, "Version %d != WL_BSS_INFO_VERSION\n",
-+ bss_list->version);
- return -EOPNOTSUPP;
- }
- brcmf_dbg(SCAN, "scanned AP count (%d)\n", bss_list->count);
-@@ -2852,7 +2880,7 @@ static s32 brcmf_inform_ibss(struct brcm
- err = brcmf_fil_cmd_data_get(netdev_priv(ndev), BRCMF_C_GET_BSS_INFO,
- buf, WL_BSS_INFO_MAX);
- if (err) {
-- brcmf_err("WLC_GET_BSS_INFO failed: %d\n", err);
-+ bphy_err(wiphy, "WLC_GET_BSS_INFO failed: %d\n", err);
- goto CleanUp;
- }
-
-@@ -2906,6 +2934,7 @@ CleanUp:
- static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg,
- struct brcmf_if *ifp)
- {
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- struct brcmf_bss_info_le *bi;
- const struct brcmf_tlv *tim;
- u16 beacon_interval;
-@@ -2922,7 +2951,7 @@ static s32 brcmf_update_bss_info(struct
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO,
- cfg->extra_buf, WL_EXTRA_BUF_MAX);
- if (err) {
-- brcmf_err("Could not get bss info %d\n", err);
-+ bphy_err(wiphy, "Could not get bss info %d\n", err);
- goto update_bss_info_out;
- }
-
-@@ -2947,7 +2976,7 @@ static s32 brcmf_update_bss_info(struct
- u32 var;
- err = brcmf_fil_iovar_int_get(ifp, "dtim_assoc", &var);
- if (err) {
-- brcmf_err("wl dtim_assoc failed (%d)\n", err);
-+ bphy_err(wiphy, "wl dtim_assoc failed (%d)\n", err);
- goto update_bss_info_out;
- }
- dtim_period = (u8)var;
-@@ -2985,9 +3014,10 @@ static void brcmf_escan_timeout(struct t
- {
- struct brcmf_cfg80211_info *cfg =
- from_timer(cfg, t, escan_timeout);
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
-
- if (cfg->int_escan_map || cfg->scan_request) {
-- brcmf_err("timer expired\n");
-+ bphy_err(wiphy, "timer expired\n");
- schedule_work(&cfg->escan_timeout_work);
- }
- }
-@@ -3036,6 +3066,7 @@ brcmf_cfg80211_escan_handler(struct brcm
- const struct brcmf_event_msg *e, void *data)
- {
- struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- s32 status;
- struct brcmf_escan_result_le *escan_result_le;
- u32 escan_buflen;
-@@ -3052,32 +3083,33 @@ brcmf_cfg80211_escan_handler(struct brcm
- goto exit;
-
- if (!test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
-- brcmf_err("scan not ready, bsscfgidx=%d\n", ifp->bsscfgidx);
-+ bphy_err(wiphy, "scan not ready, bsscfgidx=%d\n",
-+ ifp->bsscfgidx);
- return -EPERM;
- }
-
- if (status == BRCMF_E_STATUS_PARTIAL) {
- brcmf_dbg(SCAN, "ESCAN Partial result\n");
- if (e->datalen < sizeof(*escan_result_le)) {
-- brcmf_err("invalid event data length\n");
-+ bphy_err(wiphy, "invalid event data length\n");
- goto exit;
- }
- escan_result_le = (struct brcmf_escan_result_le *) data;
- if (!escan_result_le) {
-- brcmf_err("Invalid escan result (NULL pointer)\n");
-+ bphy_err(wiphy, "Invalid escan result (NULL pointer)\n");
- goto exit;
- }
- escan_buflen = le32_to_cpu(escan_result_le->buflen);
- if (escan_buflen > BRCMF_ESCAN_BUF_SIZE ||
- escan_buflen > e->datalen ||
- escan_buflen < sizeof(*escan_result_le)) {
-- brcmf_err("Invalid escan buffer length: %d\n",
-- escan_buflen);
-+ bphy_err(wiphy, "Invalid escan buffer length: %d\n",
-+ escan_buflen);
- goto exit;
- }
- if (le16_to_cpu(escan_result_le->bss_count) != 1) {
-- brcmf_err("Invalid bss_count %d: ignoring\n",
-- escan_result_le->bss_count);
-+ bphy_err(wiphy, "Invalid bss_count %d: ignoring\n",
-+ escan_result_le->bss_count);
- goto exit;
- }
- bss_info_le = &escan_result_le->bss_info_le;
-@@ -3092,8 +3124,8 @@ brcmf_cfg80211_escan_handler(struct brcm
-
- bi_length = le32_to_cpu(bss_info_le->length);
- if (bi_length != escan_buflen - WL_ESCAN_RESULTS_FIXED_SIZE) {
-- brcmf_err("Ignoring invalid bss_info length: %d\n",
-- bi_length);
-+ bphy_err(wiphy, "Ignoring invalid bss_info length: %d\n",
-+ bi_length);
- goto exit;
- }
-
-@@ -3101,7 +3133,7 @@ brcmf_cfg80211_escan_handler(struct brcm
- BIT(NL80211_IFTYPE_ADHOC))) {
- if (le16_to_cpu(bss_info_le->capability) &
- WLAN_CAPABILITY_IBSS) {
-- brcmf_err("Ignoring IBSS result\n");
-+ bphy_err(wiphy, "Ignoring IBSS result\n");
- goto exit;
- }
- }
-@@ -3109,7 +3141,7 @@ brcmf_cfg80211_escan_handler(struct brcm
- list = (struct brcmf_scan_results *)
- cfg->escan_info.escan_buf;
- if (bi_length > BRCMF_ESCAN_BUF_SIZE - list->buflen) {
-- brcmf_err("Buffer is too small: ignoring\n");
-+ bphy_err(wiphy, "Buffer is too small: ignoring\n");
- goto exit;
- }
-
-@@ -3301,14 +3333,14 @@ brcmf_notify_sched_scan_results(struct b
- WARN_ON(status != BRCMF_PNO_SCAN_COMPLETE);
- brcmf_dbg(SCAN, "PFN NET FOUND event. count: %d\n", result_count);
- if (!result_count) {
-- brcmf_err("FALSE PNO Event. (pfn_count == 0)\n");
-+ bphy_err(wiphy, "FALSE PNO Event. (pfn_count == 0)\n");
- goto out_err;
- }
-
- netinfo_start = brcmf_get_netinfo_array(pfn_result);
- datalen = e->datalen - ((void *)netinfo_start - (void *)pfn_result);
- if (datalen < result_count * sizeof(*netinfo)) {
-- brcmf_err("insufficient event data\n");
-+ bphy_err(wiphy, "insufficient event data\n");
- goto out_err;
- }
-
-@@ -3362,8 +3394,8 @@ brcmf_cfg80211_sched_scan_start(struct w
- req->n_match_sets, req->n_ssids);
-
- if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) {
-- brcmf_err("Scanning suppressed: status=%lu\n",
-- cfg->scan_status);
-+ bphy_err(wiphy, "Scanning suppressed: status=%lu\n",
-+ cfg->scan_status);
- return -EAGAIN;
- }
-
-@@ -3442,6 +3474,7 @@ brcmf_wowl_nd_results(struct brcmf_if *i
- void *data)
- {
- struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- struct brcmf_pno_scanresults_le *pfn_result;
- struct brcmf_pno_net_info_le *netinfo;
-
-@@ -3460,8 +3493,8 @@ brcmf_wowl_nd_results(struct brcmf_if *i
- }
-
- if (le32_to_cpu(pfn_result->count) < 1) {
-- brcmf_err("Invalid result count, expected 1 (%d)\n",
-- le32_to_cpu(pfn_result->count));
-+ bphy_err(wiphy, "Invalid result count, expected 1 (%d)\n",
-+ le32_to_cpu(pfn_result->count));
- return -EINVAL;
- }
-
-@@ -3498,7 +3531,7 @@ static void brcmf_report_wowl_wakeind(st
- err = brcmf_fil_iovar_data_get(ifp, "wowl_wakeind", &wake_ind_le,
- sizeof(wake_ind_le));
- if (err) {
-- brcmf_err("Get wowl_wakeind failed, err = %d\n", err);
-+ bphy_err(wiphy, "Get wowl_wakeind failed, err = %d\n", err);
- return;
- }
-
-@@ -3539,7 +3572,7 @@ static void brcmf_report_wowl_wakeind(st
- cfg->wowl.nd_data_completed,
- BRCMF_ND_INFO_TIMEOUT);
- if (!timeout)
-- brcmf_err("No result for wowl net detect\n");
-+ bphy_err(wiphy, "No result for wowl net detect\n");
- else
- wakeup_data.net_detect = cfg->wowl.nd_info;
- }
-@@ -3747,7 +3780,7 @@ brcmf_cfg80211_set_pmksa(struct wiphy *w
- cfg->pmk_list.npmk = cpu_to_le32(npmk);
- }
- } else {
-- brcmf_err("Too many PMKSA entries cached %d\n", npmk);
-+ bphy_err(wiphy, "Too many PMKSA entries cached %d\n", npmk);
- return -EINVAL;
- }
-
-@@ -3793,7 +3826,7 @@ brcmf_cfg80211_del_pmksa(struct wiphy *w
- memset(&pmk[i], 0, sizeof(*pmk));
- cfg->pmk_list.npmk = cpu_to_le32(npmk - 1);
- } else {
-- brcmf_err("Cache entry not found\n");
-+ bphy_err(wiphy, "Cache entry not found\n");
- return -EINVAL;
- }
-
-@@ -3825,19 +3858,20 @@ brcmf_cfg80211_flush_pmksa(struct wiphy
-
- static s32 brcmf_configure_opensecurity(struct brcmf_if *ifp)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- s32 err;
- s32 wpa_val;
-
- /* set auth */
- err = brcmf_fil_bsscfg_int_set(ifp, "auth", 0);
- if (err < 0) {
-- brcmf_err("auth error %d\n", err);
-+ bphy_err(wiphy, "auth error %d\n", err);
- return err;
- }
- /* set wsec */
- err = brcmf_fil_bsscfg_int_set(ifp, "wsec", 0);
- if (err < 0) {
-- brcmf_err("wsec error %d\n", err);
-+ bphy_err(wiphy, "wsec error %d\n", err);
- return err;
- }
- /* set upper-layer auth */
-@@ -3847,7 +3881,7 @@ static s32 brcmf_configure_opensecurity(
- wpa_val = WPA_AUTH_DISABLED;
- err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_val);
- if (err < 0) {
-- brcmf_err("wpa_auth error %d\n", err);
-+ bphy_err(wiphy, "wpa_auth error %d\n", err);
- return err;
- }
-
-@@ -3867,6 +3901,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- const struct brcmf_vs_tlv *wpa_ie,
- bool is_rsn_ie)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- u32 auth = 0; /* d11 open authentication */
- u16 count;
- s32 err = 0;
-@@ -3897,13 +3932,13 @@ brcmf_configure_wpaie(struct brcmf_if *i
- /* check for multicast cipher suite */
- if (offset + WPA_IE_MIN_OUI_LEN > len) {
- err = -EINVAL;
-- brcmf_err("no multicast cipher suite\n");
-+ bphy_err(wiphy, "no multicast cipher suite\n");
- goto exit;
- }
-
- if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) {
- err = -EINVAL;
-- brcmf_err("ivalid OUI\n");
-+ bphy_err(wiphy, "ivalid OUI\n");
- goto exit;
- }
- offset += TLV_OUI_LEN;
-@@ -3925,7 +3960,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- break;
- default:
- err = -EINVAL;
-- brcmf_err("Invalid multi cast cipher info\n");
-+ bphy_err(wiphy, "Invalid multi cast cipher info\n");
- goto exit;
- }
-
-@@ -3936,13 +3971,13 @@ brcmf_configure_wpaie(struct brcmf_if *i
- /* Check for unicast suite(s) */
- if (offset + (WPA_IE_MIN_OUI_LEN * count) > len) {
- err = -EINVAL;
-- brcmf_err("no unicast cipher suite\n");
-+ bphy_err(wiphy, "no unicast cipher suite\n");
- goto exit;
- }
- for (i = 0; i < count; i++) {
- if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) {
- err = -EINVAL;
-- brcmf_err("ivalid OUI\n");
-+ bphy_err(wiphy, "ivalid OUI\n");
- goto exit;
- }
- offset += TLV_OUI_LEN;
-@@ -3960,7 +3995,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- pval |= AES_ENABLED;
- break;
- default:
-- brcmf_err("Invalid unicast security info\n");
-+ bphy_err(wiphy, "Invalid unicast security info\n");
- }
- offset++;
- }
-@@ -3970,13 +4005,13 @@ brcmf_configure_wpaie(struct brcmf_if *i
- /* Check for auth key management suite(s) */
- if (offset + (WPA_IE_MIN_OUI_LEN * count) > len) {
- err = -EINVAL;
-- brcmf_err("no auth key mgmt suite\n");
-+ bphy_err(wiphy, "no auth key mgmt suite\n");
- goto exit;
- }
- for (i = 0; i < count; i++) {
- if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) {
- err = -EINVAL;
-- brcmf_err("ivalid OUI\n");
-+ bphy_err(wiphy, "ivalid OUI\n");
- goto exit;
- }
- offset += TLV_OUI_LEN;
-@@ -4004,7 +4039,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- wpa_auth |= WPA2_AUTH_1X_SHA256;
- break;
- default:
-- brcmf_err("Invalid key mgmt info\n");
-+ bphy_err(wiphy, "Invalid key mgmt info\n");
- }
- offset++;
- }
-@@ -4046,7 +4081,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- err = brcmf_fil_bsscfg_int_set(ifp, "wme_bss_disable",
- wme_bss_disable);
- if (err < 0) {
-- brcmf_err("wme_bss_disable error %d\n", err);
-+ bphy_err(wiphy, "wme_bss_disable error %d\n", err);
- goto exit;
- }
-
-@@ -4060,7 +4095,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- &data[offset],
- WPA_IE_MIN_OUI_LEN);
- if (err < 0) {
-- brcmf_err("bip error %d\n", err);
-+ bphy_err(wiphy, "bip error %d\n", err);
- goto exit;
- }
- }
-@@ -4071,13 +4106,13 @@ brcmf_configure_wpaie(struct brcmf_if *i
- /* set auth */
- err = brcmf_fil_bsscfg_int_set(ifp, "auth", auth);
- if (err < 0) {
-- brcmf_err("auth error %d\n", err);
-+ bphy_err(wiphy, "auth error %d\n", err);
- goto exit;
- }
- /* set wsec */
- err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
- if (err < 0) {
-- brcmf_err("wsec error %d\n", err);
-+ bphy_err(wiphy, "wsec error %d\n", err);
- goto exit;
- }
- /* Configure MFP, this needs to go after wsec otherwise the wsec command
-@@ -4086,14 +4121,14 @@ brcmf_configure_wpaie(struct brcmf_if *i
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) {
- err = brcmf_fil_bsscfg_int_set(ifp, "mfp", mfp);
- if (err < 0) {
-- brcmf_err("mfp error %d\n", err);
-+ bphy_err(wiphy, "mfp error %d\n", err);
- goto exit;
- }
- }
- /* set upper-layer auth */
- err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_auth);
- if (err < 0) {
-- brcmf_err("wpa_auth error %d\n", err);
-+ bphy_err(wiphy, "wpa_auth error %d\n", err);
- goto exit;
- }
-
-@@ -4180,6 +4215,7 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c
- const u8 *vndr_ie_buf, u32 vndr_ie_len)
- {
- struct brcmf_if *ifp;
-+ struct wiphy *wiphy;
- struct vif_saved_ie *saved_ie;
- s32 err = 0;
- u8 *iovar_ie_buf;
-@@ -4200,6 +4236,7 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c
- if (!vif)
- return -ENODEV;
- ifp = vif->ifp;
-+ wiphy = ifp->drvr->wiphy;
- saved_ie = &vif->saved_ie;
-
- brcmf_dbg(TRACE, "bsscfgidx %d, pktflag : 0x%02X\n", ifp->bsscfgidx,
-@@ -4231,13 +4268,13 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c
- break;
- default:
- err = -EPERM;
-- brcmf_err("not suitable type\n");
-+ bphy_err(wiphy, "not suitable type\n");
- goto exit;
- }
-
- if (vndr_ie_len > mgmt_ie_buf_len) {
- err = -ENOMEM;
-- brcmf_err("extra IE size too big\n");
-+ bphy_err(wiphy, "extra IE size too big\n");
- goto exit;
- }
-
-@@ -4298,8 +4335,8 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c
- /* verify remained buf size before copy data */
- if (remained_buf_len < (vndrie_info->vndrie.len +
- VNDR_IE_VSIE_OFFSET)) {
-- brcmf_err("no space in mgmt_ie_buf: len left %d",
-- remained_buf_len);
-+ bphy_err(wiphy, "no space in mgmt_ie_buf: len left %d",
-+ remained_buf_len);
- break;
- }
- remained_buf_len -= (vndrie_info->ie_len +
-@@ -4330,7 +4367,7 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c
- err = brcmf_fil_bsscfg_data_set(ifp, "vndr_ie", iovar_ie_buf,
- total_ie_buf_len);
- if (err)
-- brcmf_err("vndr ie set error : %d\n", err);
-+ bphy_err(wiphy, "vndr ie set error : %d\n", err);
- }
-
- exit:
-@@ -4358,13 +4395,14 @@ static s32
- brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif,
- struct cfg80211_beacon_data *beacon)
- {
-+ struct wiphy *wiphy = vif->ifp->drvr->wiphy;
- s32 err;
-
- /* Set Beacon IEs to FW */
- err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_BEACON_FLAG,
- beacon->tail, beacon->tail_len);
- if (err) {
-- brcmf_err("Set Beacon IE Failed\n");
-+ bphy_err(wiphy, "Set Beacon IE Failed\n");
- return err;
- }
- brcmf_dbg(TRACE, "Applied Vndr IEs for Beacon\n");
-@@ -4374,7 +4412,7 @@ brcmf_config_ap_mgmt_ie(struct brcmf_cfg
- beacon->proberesp_ies,
- beacon->proberesp_ies_len);
- if (err)
-- brcmf_err("Set Probe Resp IE Failed\n");
-+ bphy_err(wiphy, "Set Probe Resp IE Failed\n");
- else
- brcmf_dbg(TRACE, "Applied Vndr IEs for Probe Resp\n");
-
-@@ -4483,7 +4521,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY,
- is_11d);
- if (err < 0) {
-- brcmf_err("Regulatory Set Error, %d\n", err);
-+ bphy_err(wiphy, "Regulatory Set Error, %d\n",
-+ err);
- goto exit;
- }
- }
-@@ -4491,8 +4530,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD,
- settings->beacon_interval);
- if (err < 0) {
-- brcmf_err("Beacon Interval Set Error, %d\n",
-- err);
-+ bphy_err(wiphy, "Beacon Interval Set Error, %d\n",
-+ err);
- goto exit;
- }
- }
-@@ -4500,7 +4539,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_DTIMPRD,
- settings->dtim_period);
- if (err < 0) {
-- brcmf_err("DTIM Interval Set Error, %d\n", err);
-+ bphy_err(wiphy, "DTIM Interval Set Error, %d\n",
-+ err);
- goto exit;
- }
- }
-@@ -4510,7 +4550,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- !brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB))) {
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1);
- if (err < 0) {
-- brcmf_err("BRCMF_C_DOWN error %d\n", err);
-+ bphy_err(wiphy, "BRCMF_C_DOWN error %d\n",
-+ err);
- goto exit;
- }
- brcmf_fil_iovar_int_set(ifp, "apsta", 0);
-@@ -4518,7 +4559,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 1);
- if (err < 0) {
-- brcmf_err("SET INFRA error %d\n", err);
-+ bphy_err(wiphy, "SET INFRA error %d\n", err);
- goto exit;
- }
- } else if (WARN_ON(supports_11d && (is_11d != ifp->vif->is_11d))) {
-@@ -4534,7 +4575,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 1);
- if (err < 0) {
-- brcmf_err("setting AP mode failed %d\n", err);
-+ bphy_err(wiphy, "setting AP mode failed %d\n",
-+ err);
- goto exit;
- }
- if (!mbss) {
-@@ -4543,14 +4585,14 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- */
- err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
- if (err < 0) {
-- brcmf_err("Set Channel failed: chspec=%d, %d\n",
-- chanspec, err);
-+ bphy_err(wiphy, "Set Channel failed: chspec=%d, %d\n",
-+ chanspec, err);
- goto exit;
- }
- }
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1);
- if (err < 0) {
-- brcmf_err("BRCMF_C_UP error (%d)\n", err);
-+ bphy_err(wiphy, "BRCMF_C_UP error (%d)\n", err);
- goto exit;
- }
- /* On DOWN the firmware removes the WEP keys, reconfigure
-@@ -4565,14 +4607,14 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
- &join_params, sizeof(join_params));
- if (err < 0) {
-- brcmf_err("SET SSID error (%d)\n", err);
-+ bphy_err(wiphy, "SET SSID error (%d)\n", err);
- goto exit;
- }
-
- if (settings->hidden_ssid) {
- err = brcmf_fil_iovar_int_set(ifp, "closednet", 1);
- if (err) {
-- brcmf_err("closednet error (%d)\n", err);
-+ bphy_err(wiphy, "closednet error (%d)\n", err);
- goto exit;
- }
- }
-@@ -4581,14 +4623,14 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- } else if (dev_role == NL80211_IFTYPE_P2P_GO) {
- err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
- if (err < 0) {
-- brcmf_err("Set Channel failed: chspec=%d, %d\n",
-- chanspec, err);
-+ bphy_err(wiphy, "Set Channel failed: chspec=%d, %d\n",
-+ chanspec, err);
- goto exit;
- }
- err = brcmf_fil_bsscfg_data_set(ifp, "ssid", &ssid_le,
- sizeof(ssid_le));
- if (err < 0) {
-- brcmf_err("setting ssid failed %d\n", err);
-+ bphy_err(wiphy, "setting ssid failed %d\n", err);
- goto exit;
- }
- bss_enable.bsscfgidx = cpu_to_le32(ifp->bsscfgidx);
-@@ -4596,7 +4638,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable,
- sizeof(bss_enable));
- if (err < 0) {
-- brcmf_err("bss_enable config failed %d\n", err);
-+ bphy_err(wiphy, "bss_enable config failed %d\n", err);
- goto exit;
- }
-
-@@ -4644,13 +4686,13 @@ static int brcmf_cfg80211_stop_ap(struct
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
- &join_params, sizeof(join_params));
- if (err < 0)
-- brcmf_err("SET SSID error (%d)\n", err);
-+ bphy_err(wiphy, "SET SSID error (%d)\n", err);
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1);
- if (err < 0)
-- brcmf_err("BRCMF_C_DOWN error %d\n", err);
-+ bphy_err(wiphy, "BRCMF_C_DOWN error %d\n", err);
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0);
- if (err < 0)
-- brcmf_err("setting AP mode failed %d\n", err);
-+ bphy_err(wiphy, "setting AP mode failed %d\n", err);
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS))
- brcmf_fil_iovar_int_set(ifp, "mbss", 0);
- brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY,
-@@ -4658,7 +4700,7 @@ static int brcmf_cfg80211_stop_ap(struct
- /* Bring device back up so it can be used again */
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1);
- if (err < 0)
-- brcmf_err("BRCMF_C_UP error %d\n", err);
-+ bphy_err(wiphy, "BRCMF_C_UP error %d\n", err);
-
- brcmf_vif_clear_mgmt_ies(ifp->vif);
- } else {
-@@ -4667,7 +4709,7 @@ static int brcmf_cfg80211_stop_ap(struct
- err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable,
- sizeof(bss_enable));
- if (err < 0)
-- brcmf_err("bss_enable config failed %d\n", err);
-+ bphy_err(wiphy, "bss_enable config failed %d\n", err);
- }
- brcmf_set_mpc(ifp, 1);
- brcmf_configure_arp_nd_offload(ifp, true);
-@@ -4715,7 +4757,8 @@ brcmf_cfg80211_del_station(struct wiphy
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON,
- &scbval, sizeof(scbval));
- if (err)
-- brcmf_err("SCB_DEAUTHENTICATE_FOR_REASON failed %d\n", err);
-+ bphy_err(wiphy, "SCB_DEAUTHENTICATE_FOR_REASON failed %d\n",
-+ err);
-
- brcmf_dbg(TRACE, "Exit\n");
- return err;
-@@ -4745,7 +4788,7 @@ brcmf_cfg80211_change_station(struct wip
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SCB_DEAUTHORIZE,
- (void *)mac, ETH_ALEN);
- if (err < 0)
-- brcmf_err("Setting SCB (de-)authorize failed, %d\n", err);
-+ bphy_err(wiphy, "Setting SCB (de-)authorize failed, %d\n", err);
-
- return err;
- }
-@@ -4795,7 +4838,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wip
- mgmt = (const struct ieee80211_mgmt *)buf;
-
- if (!ieee80211_is_mgmt(mgmt->frame_control)) {
-- brcmf_err("Driver only allows MGMT packet type\n");
-+ bphy_err(wiphy, "Driver only allows MGMT packet type\n");
- return -EPERM;
- }
-
-@@ -4826,13 +4869,13 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wip
- GFP_KERNEL);
- } else if (ieee80211_is_action(mgmt->frame_control)) {
- if (len > BRCMF_FIL_ACTION_FRAME_SIZE + DOT11_MGMT_HDR_LEN) {
-- brcmf_err("invalid action frame length\n");
-+ bphy_err(wiphy, "invalid action frame length\n");
- err = -EINVAL;
- goto exit;
- }
- af_params = kzalloc(sizeof(*af_params), GFP_KERNEL);
- if (af_params == NULL) {
-- brcmf_err("unable to allocate frame\n");
-+ bphy_err(wiphy, "unable to allocate frame\n");
- err = -ENOMEM;
- goto exit;
- }
-@@ -4890,7 +4933,7 @@ brcmf_cfg80211_cancel_remain_on_channel(
-
- vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
- if (vif == NULL) {
-- brcmf_err("No p2p device available for probe response\n");
-+ bphy_err(wiphy, "No p2p device available for probe response\n");
- err = -ENODEV;
- goto exit;
- }
-@@ -4918,7 +4961,7 @@ static int brcmf_cfg80211_get_channel(st
-
- err = brcmf_fil_iovar_int_get(ifp, "chanspec", &chanspec);
- if (err) {
-- brcmf_err("chanspec failed (%d)\n", err);
-+ bphy_err(wiphy, "chanspec failed (%d)\n", err);
- return err;
- }
-
-@@ -5057,7 +5100,7 @@ static int brcmf_cfg80211_tdls_oper(stru
- ret = brcmf_fil_iovar_data_set(ifp, "tdls_endpoint",
- &info, sizeof(info));
- if (ret < 0)
-- brcmf_err("tdls_endpoint iovar failed: ret=%d\n", ret);
-+ bphy_err(wiphy, "tdls_endpoint iovar failed: ret=%d\n", ret);
-
- return ret;
- }
-@@ -5078,7 +5121,7 @@ brcmf_cfg80211_update_conn_params(struct
- err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG,
- sme->ie, sme->ie_len);
- if (err)
-- brcmf_err("Set Assoc REQ IE Failed\n");
-+ bphy_err(wiphy, "Set Assoc REQ IE Failed\n");
- else
- brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n");
-
-@@ -5104,7 +5147,7 @@ brcmf_cfg80211_set_rekey_data(struct wip
- ret = brcmf_fil_iovar_data_set(ifp, "gtk_key_info", &gtk_le,
- sizeof(gtk_le));
- if (ret < 0)
-- brcmf_err("gtk_key_info iovar failed: ret=%d\n", ret);
-+ bphy_err(wiphy, "gtk_key_info iovar failed: ret=%d\n", ret);
-
- return ret;
- }
-@@ -5336,6 +5379,7 @@ static void brcmf_clear_assoc_ies(struct
- static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg,
- struct brcmf_if *ifp)
- {
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- struct brcmf_cfg80211_assoc_ielen_le *assoc_info;
- struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg);
- u32 req_len;
-@@ -5347,7 +5391,7 @@ static s32 brcmf_get_assoc_ies(struct br
- err = brcmf_fil_iovar_data_get(ifp, "assoc_info",
- cfg->extra_buf, WL_ASSOC_INFO_MAX);
- if (err) {
-- brcmf_err("could not get assoc info (%d)\n", err);
-+ bphy_err(wiphy, "could not get assoc info (%d)\n", err);
- return err;
- }
- assoc_info =
-@@ -5359,7 +5403,7 @@ static s32 brcmf_get_assoc_ies(struct br
- cfg->extra_buf,
- WL_ASSOC_INFO_MAX);
- if (err) {
-- brcmf_err("could not get assoc req (%d)\n", err);
-+ bphy_err(wiphy, "could not get assoc req (%d)\n", err);
- return err;
- }
- conn_info->req_ie_len = req_len;
-@@ -5375,7 +5419,7 @@ static s32 brcmf_get_assoc_ies(struct br
- cfg->extra_buf,
- WL_ASSOC_INFO_MAX);
- if (err) {
-- brcmf_err("could not get assoc resp (%d)\n", err);
-+ bphy_err(wiphy, "could not get assoc resp (%d)\n", err);
- return err;
- }
- conn_info->resp_ie_len = resp_len;
-@@ -5502,6 +5546,7 @@ brcmf_notify_connect_status_ap(struct br
- struct net_device *ndev,
- const struct brcmf_event_msg *e, void *data)
- {
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- static int generation;
- u32 event = e->event_code;
- u32 reason = e->reason;
-@@ -5519,7 +5564,7 @@ brcmf_notify_connect_status_ap(struct br
- if (((event == BRCMF_E_ASSOC_IND) || (event == BRCMF_E_REASSOC_IND)) &&
- (reason == BRCMF_E_STATUS_SUCCESS)) {
- if (!data) {
-- brcmf_err("No IEs present in ASSOC/REASSOC_IND");
-+ bphy_err(wiphy, "No IEs present in ASSOC/REASSOC_IND\n");
- return -EINVAL;
- }
-
-@@ -5811,6 +5856,7 @@ static void init_vif_event(struct brcmf_
-
- static s32 brcmf_dongle_roam(struct brcmf_if *ifp)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- s32 err;
- u32 bcn_timeout;
- __le32 roamtrigger[2];
-@@ -5823,7 +5869,7 @@ static s32 brcmf_dongle_roam(struct brcm
- bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON;
- err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout);
- if (err) {
-- brcmf_err("bcn_timeout error (%d)\n", err);
-+ bphy_err(wiphy, "bcn_timeout error (%d)\n", err);
- goto roam_setup_done;
- }
-
-@@ -5835,7 +5881,7 @@ static s32 brcmf_dongle_roam(struct brcm
- err = brcmf_fil_iovar_int_set(ifp, "roam_off",
- ifp->drvr->settings->roamoff);
- if (err) {
-- brcmf_err("roam_off error (%d)\n", err);
-+ bphy_err(wiphy, "roam_off error (%d)\n", err);
- goto roam_setup_done;
- }
-
-@@ -5844,7 +5890,7 @@ static s32 brcmf_dongle_roam(struct brcm
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_ROAM_TRIGGER,
- (void *)roamtrigger, sizeof(roamtrigger));
- if (err) {
-- brcmf_err("WLC_SET_ROAM_TRIGGER error (%d)\n", err);
-+ bphy_err(wiphy, "WLC_SET_ROAM_TRIGGER error (%d)\n", err);
- goto roam_setup_done;
- }
-
-@@ -5853,7 +5899,7 @@ static s32 brcmf_dongle_roam(struct brcm
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_ROAM_DELTA,
- (void *)roam_delta, sizeof(roam_delta));
- if (err) {
-- brcmf_err("WLC_SET_ROAM_DELTA error (%d)\n", err);
-+ bphy_err(wiphy, "WLC_SET_ROAM_DELTA error (%d)\n", err);
- goto roam_setup_done;
- }
-
-@@ -5864,25 +5910,26 @@ roam_setup_done:
- static s32
- brcmf_dongle_scantime(struct brcmf_if *ifp)
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- s32 err = 0;
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME,
- BRCMF_SCAN_CHANNEL_TIME);
- if (err) {
-- brcmf_err("Scan assoc time error (%d)\n", err);
-+ bphy_err(wiphy, "Scan assoc time error (%d)\n", err);
- goto dongle_scantime_out;
- }
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_UNASSOC_TIME,
- BRCMF_SCAN_UNASSOC_TIME);
- if (err) {
-- brcmf_err("Scan unassoc time error (%d)\n", err);
-+ bphy_err(wiphy, "Scan unassoc time error (%d)\n", err);
- goto dongle_scantime_out;
- }
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_PASSIVE_TIME,
- BRCMF_SCAN_PASSIVE_TIME);
- if (err) {
-- brcmf_err("Scan passive time error (%d)\n", err);
-+ bphy_err(wiphy, "Scan passive time error (%d)\n", err);
- goto dongle_scantime_out;
- }
-
-@@ -5914,10 +5961,10 @@ static void brcmf_update_bw40_channel_fl
- static int brcmf_construct_chaninfo(struct brcmf_cfg80211_info *cfg,
- u32 bw_cap[])
- {
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
- struct ieee80211_supported_band *band;
- struct ieee80211_channel *channel;
-- struct wiphy *wiphy;
- struct brcmf_chanspec_list *list;
- struct brcmu_chan ch;
- int err;
-@@ -5936,11 +5983,10 @@ static int brcmf_construct_chaninfo(stru
- err = brcmf_fil_iovar_data_get(ifp, "chanspecs", pbuf,
- BRCMF_DCMD_MEDLEN);
- if (err) {
-- brcmf_err("get chanspecs error (%d)\n", err);
-+ bphy_err(wiphy, "get chanspecs error (%d)\n", err);
- goto fail_pbuf;
- }
-
-- wiphy = cfg_to_wiphy(cfg);
- band = wiphy->bands[NL80211_BAND_2GHZ];
- if (band)
- for (i = 0; i < band->n_channels; i++)
-@@ -5960,7 +6006,8 @@ static int brcmf_construct_chaninfo(stru
- } else if (ch.band == BRCMU_CHAN_BAND_5G) {
- band = wiphy->bands[NL80211_BAND_5GHZ];
- } else {
-- brcmf_err("Invalid channel Spec. 0x%x.\n", ch.chspec);
-+ bphy_err(wiphy, "Invalid channel Spec. 0x%x.\n",
-+ ch.chspec);
- continue;
- }
- if (!band)
-@@ -5983,8 +6030,8 @@ static int brcmf_construct_chaninfo(stru
- /* It seems firmware supports some channel we never
- * considered. Something new in IEEE standard?
- */
-- brcmf_err("Ignoring unexpected firmware channel %d\n",
-- ch.control_ch_num);
-+ bphy_err(wiphy, "Ignoring unexpected firmware channel %d\n",
-+ ch.control_ch_num);
- continue;
- }
-
-@@ -6030,6 +6077,7 @@ fail_pbuf:
-
- static int brcmf_enable_bw40_2g(struct brcmf_cfg80211_info *cfg)
- {
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
- struct ieee80211_supported_band *band;
- struct brcmf_fil_bwcap_le band_bwcap;
-@@ -6076,7 +6124,7 @@ static int brcmf_enable_bw40_2g(struct b
- err = brcmf_fil_iovar_data_get(ifp, "chanspecs", pbuf,
- BRCMF_DCMD_MEDLEN);
- if (err) {
-- brcmf_err("get chanspecs error (%d)\n", err);
-+ bphy_err(wiphy, "get chanspecs error (%d)\n", err);
- kfree(pbuf);
- return err;
- }
-@@ -6107,6 +6155,7 @@ static int brcmf_enable_bw40_2g(struct b
-
- static void brcmf_get_bwcap(struct brcmf_if *ifp, u32 bw_cap[])
- {
-+ struct wiphy *wiphy = ifp->drvr->wiphy;
- u32 band, mimo_bwcap;
- int err;
-
-@@ -6142,7 +6191,7 @@ static void brcmf_get_bwcap(struct brcmf
- bw_cap[NL80211_BAND_5GHZ] |= WLC_BW_20MHZ_BIT;
- break;
- default:
-- brcmf_err("invalid mimo_bw_cap value\n");
-+ bphy_err(wiphy, "invalid mimo_bw_cap value\n");
- }
- }
-
-@@ -6218,7 +6267,7 @@ static void brcmf_update_vht_cap(struct
- static int brcmf_setup_wiphybands(struct brcmf_cfg80211_info *cfg)
- {
- struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
-- struct wiphy *wiphy;
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- u32 nmode = 0;
- u32 vhtmode = 0;
- u32 bw_cap[2] = { WLC_BW_20MHZ_BIT, WLC_BW_20MHZ_BIT };
-@@ -6234,7 +6283,7 @@ static int brcmf_setup_wiphybands(struct
- (void)brcmf_fil_iovar_int_get(ifp, "vhtmode", &vhtmode);
- err = brcmf_fil_iovar_int_get(ifp, "nmode", &nmode);
- if (err) {
-- brcmf_err("nmode error (%d)\n", err);
-+ bphy_err(wiphy, "nmode error (%d)\n", err);
- } else {
- brcmf_get_bwcap(ifp, bw_cap);
- }
-@@ -6244,7 +6293,7 @@ static int brcmf_setup_wiphybands(struct
-
- err = brcmf_fil_iovar_int_get(ifp, "rxchain", &rxchain);
- if (err) {
-- brcmf_err("rxchain error (%d)\n", err);
-+ bphy_err(wiphy, "rxchain error (%d)\n", err);
- nchain = 1;
- } else {
- for (nchain = 0; rxchain; nchain++)
-@@ -6254,7 +6303,7 @@ static int brcmf_setup_wiphybands(struct
-
- err = brcmf_construct_chaninfo(cfg, bw_cap);
- if (err) {
-- brcmf_err("brcmf_construct_chaninfo failed (%d)\n", err);
-+ bphy_err(wiphy, "brcmf_construct_chaninfo failed (%d)\n", err);
- return err;
- }
-
-@@ -6266,7 +6315,6 @@ static int brcmf_setup_wiphybands(struct
- &txbf_bfr_cap);
- }
-
-- wiphy = cfg_to_wiphy(cfg);
- for (i = 0; i < ARRAY_SIZE(wiphy->bands); i++) {
- band = wiphy->bands[i];
- if (band == NULL)
-@@ -6467,7 +6515,7 @@ static void brcmf_wiphy_wowl_params(stru
- wowl = kmemdup(&brcmf_wowlan_support, sizeof(brcmf_wowlan_support),
- GFP_KERNEL);
- if (!wowl) {
-- brcmf_err("only support basic wowlan features\n");
-+ bphy_err(wiphy, "only support basic wowlan features\n");
- wiphy->wowlan = &brcmf_wowlan_support;
- return;
- }
-@@ -6564,7 +6612,7 @@ static int brcmf_setup_wiphy(struct wiph
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BANDLIST, &bandlist,
- sizeof(bandlist));
- if (err) {
-- brcmf_err("could not obtain band info: err=%d\n", err);
-+ bphy_err(wiphy, "could not obtain band info: err=%d\n", err);
- return err;
- }
- /* first entry in bandlist is number of bands */
-@@ -6613,6 +6661,7 @@ static int brcmf_setup_wiphy(struct wiph
-
- static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
- {
-+ struct wiphy *wiphy = cfg_to_wiphy(cfg);
- struct net_device *ndev;
- struct wireless_dev *wdev;
- struct brcmf_if *ifp;
-@@ -6650,7 +6699,7 @@ static s32 brcmf_config_dongle(struct br
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_FAKEFRAG, 1);
- if (err) {
-- brcmf_err("failed to set frameburst mode\n");
-+ bphy_err(wiphy, "failed to set frameburst mode\n");
- goto default_conf_out;
- }
-
-@@ -6842,8 +6891,8 @@ static void brcmf_cfg80211_reg_notifier(
- /* ignore non-ISO3166 country codes */
- for (i = 0; i < 2; i++)
- if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') {
-- brcmf_err("not an ISO3166 code (0x%02x 0x%02x)\n",
-- req->alpha2[0], req->alpha2[1]);
-+ bphy_err(wiphy, "not an ISO3166 code (0x%02x 0x%02x)\n",
-+ req->alpha2[0], req->alpha2[1]);
- return;
- }
-
-@@ -6852,7 +6901,7 @@ static void brcmf_cfg80211_reg_notifier(
-
- err = brcmf_fil_iovar_data_get(ifp, "country", &ccreq, sizeof(ccreq));
- if (err) {
-- brcmf_err("Country code iovar returned err = %d\n", err);
-+ bphy_err(wiphy, "Country code iovar returned err = %d\n", err);
- return;
- }
-
-@@ -6862,7 +6911,7 @@ static void brcmf_cfg80211_reg_notifier(
-
- err = brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
- if (err) {
-- brcmf_err("Firmware rejected country setting\n");
-+ bphy_err(wiphy, "Firmware rejected country setting\n");
- return;
- }
- brcmf_setup_wiphybands(cfg);
-@@ -6908,13 +6957,13 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- u16 *cap = NULL;
-
- if (!ndev) {
-- brcmf_err("ndev is invalid\n");
-+ bphy_err(wiphy, "ndev is invalid\n");
- return NULL;
- }
-
- cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
- if (!cfg) {
-- brcmf_err("Could not allocate wiphy device\n");
-+ bphy_err(wiphy, "Could not allocate wiphy device\n");
- return NULL;
- }
-
-@@ -6935,7 +6984,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
-
- err = wl_init_priv(cfg);
- if (err) {
-- brcmf_err("Failed to init iwm_priv (%d)\n", err);
-+ bphy_err(wiphy, "Failed to init iwm_priv (%d)\n", err);
- brcmf_free_vif(vif);
- goto wiphy_out;
- }
-@@ -6944,7 +6993,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- /* determine d11 io type before wiphy setup */
- err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_VERSION, &io_type);
- if (err) {
-- brcmf_err("Failed to get D11 version (%d)\n", err);
-+ bphy_err(wiphy, "Failed to get D11 version (%d)\n", err);
- goto priv_out;
- }
- cfg->d11inf.io_type = (u8)io_type;
-@@ -6978,13 +7027,13 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- #endif
- err = wiphy_register(wiphy);
- if (err < 0) {
-- brcmf_err("Could not register wiphy device (%d)\n", err);
-+ bphy_err(wiphy, "Could not register wiphy device (%d)\n", err);
- goto priv_out;
- }
-
- err = brcmf_setup_wiphybands(cfg);
- if (err) {
-- brcmf_err("Setting wiphy bands failed (%d)\n", err);
-+ bphy_err(wiphy, "Setting wiphy bands failed (%d)\n", err);
- goto wiphy_unreg_out;
- }
-
-@@ -7002,24 +7051,24 @@ struct brcmf_cfg80211_info *brcmf_cfg802
-
- err = brcmf_fweh_activate_events(ifp);
- if (err) {
-- brcmf_err("FWEH activation failed (%d)\n", err);
-+ bphy_err(wiphy, "FWEH activation failed (%d)\n", err);
- goto wiphy_unreg_out;
- }
-
- err = brcmf_p2p_attach(cfg, p2pdev_forced);
- if (err) {
-- brcmf_err("P2P initialisation failed (%d)\n", err);
-+ bphy_err(wiphy, "P2P initialisation failed (%d)\n", err);
- goto wiphy_unreg_out;
- }
- err = brcmf_btcoex_attach(cfg);
- if (err) {
-- brcmf_err("BT-coex initialisation failed (%d)\n", err);
-+ bphy_err(wiphy, "BT-coex initialisation failed (%d)\n", err);
- brcmf_p2p_detach(&cfg->p2p);
- goto wiphy_unreg_out;
- }
- err = brcmf_pno_attach(cfg);
- if (err) {
-- brcmf_err("PNO initialisation failed (%d)\n", err);
-+ bphy_err(wiphy, "PNO initialisation failed (%d)\n", err);
- brcmf_btcoex_detach(cfg);
- brcmf_p2p_detach(&cfg->p2p);
- goto wiphy_unreg_out;
-@@ -7039,7 +7088,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- /* (re-) activate FWEH event handling */
- err = brcmf_fweh_activate_events(ifp);
- if (err) {
-- brcmf_err("FWEH activation failed (%d)\n", err);
-+ bphy_err(wiphy, "FWEH activation failed (%d)\n", err);
- goto detach;
- }
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-@@ -62,6 +62,15 @@ void __brcmf_err(struct brcmf_bus *bus,
- } while (0)
- #endif
-
-+#define bphy_err(wiphy, fmt, ...) \
-+ do { \
-+ if (IS_ENABLED(CPTCFG_BRCMDBG) || \
-+ IS_ENABLED(CPTCFG_BRCM_TRACING) || \
-+ net_ratelimit()) \
-+ wiphy_err(wiphy, "%s: " fmt, __func__, \
-+ ##__VA_ARGS__); \
-+ } while (0)
-+
- #if defined(DEBUG) || defined(CPTCFG_BRCM_TRACING)
-
- /* For debug/tracing purposes treat info messages as errors */
diff --git a/package/kernel/mac80211/patches/brcm/347-v5.1-brcmfmac-fix-typos.patch b/package/kernel/mac80211/patches/brcm/347-v5.1-brcmfmac-fix-typos.patch
deleted file mode 100644
index e21c1ee60a..0000000000
--- a/package/kernel/mac80211/patches/brcm/347-v5.1-brcmfmac-fix-typos.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 2359dd09f9819c7d57d81e05173541f0f9f820c7 Mon Sep 17 00:00:00 2001
-From: Matteo Croce <mcroce@redhat.com>
-Date: Tue, 29 Jan 2019 18:47:17 +0100
-Subject: [PATCH] brcmfmac: fix typos
-
-Fix spelling mistakes in brcmfmac: "lenght" -> "length".
-The typos are also in the special comment blocks which
-translates to documentation.
-
-Signed-off-by: Matteo Croce <mcroce@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h | 2 +-
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 2 +-
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h | 2 +-
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 2 +-
- 4 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
-@@ -36,7 +36,7 @@
- #define BRCMF_DCMD_MEDLEN 1536
- #define BRCMF_DCMD_MAXLEN 8192
-
--/* IOCTL from host to device are limited in lenght. A device can only handle
-+/* IOCTL from host to device are limited in length. A device can only handle
- * ethernet frame size. This limitation is to be applied by protocol layer.
- */
- #define BRCMF_TX_IOCTL_MAX_MSG_SIZE (ETH_FRAME_LEN+ETH_FCS_LEN)
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -47,7 +47,7 @@ enum nvram_parser_state {
- * @state: current parser state.
- * @data: input buffer being parsed.
- * @nvram: output buffer with parse result.
-- * @nvram_len: lenght of parse result.
-+ * @nvram_len: length of parse result.
- * @line: current line.
- * @column: current column in line.
- * @pos: byte offset in input buffer.
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
-@@ -266,7 +266,7 @@ struct brcmf_event {
- * @status: status information.
- * @reason: reason code.
- * @auth_type: authentication type.
-- * @datalen: lenght of event data buffer.
-+ * @datalen: length of event data buffer.
- * @addr: ether address.
- * @ifname: interface name.
- * @ifidx: interface index.
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-@@ -508,7 +508,7 @@ static void brcmf_usb_rx_complete(struct
- skb = req->skb;
- req->skb = NULL;
-
-- /* zero lenght packets indicate usb "failure". Do not refill */
-+ /* zero length packets indicate usb "failure". Do not refill */
- if (urb->status != 0 || !urb->actual_length) {
- brcmu_pkt_buf_free_skb(skb);
- brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
diff --git a/package/kernel/mac80211/patches/brcm/348-v5.1-brcmfmac-support-monitor-frames-with-the-hardware-uc.patch b/package/kernel/mac80211/patches/brcm/348-v5.1-brcmfmac-support-monitor-frames-with-the-hardware-uc.patch
deleted file mode 100644
index c93bcf0ce9..0000000000
--- a/package/kernel/mac80211/patches/brcm/348-v5.1-brcmfmac-support-monitor-frames-with-the-hardware-uc.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From e665988be29ccea3584528967b432a5cfd801ca4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 8 Feb 2019 07:42:30 +0100
-Subject: [PATCH] brcmfmac: support monitor frames with the hardware/ucode
- header
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far there were two monitor frame formats:
-1) 802.11 frames (with frame (sub)type & all addresses)
-2) 802.11 frames with the radiotap header
-
-Testing the latest FullMAC firmwares for 4366b1/4366c0 resulted in
-discovering a new format being used. It seems (almost?) identical to the
-one known from ucode used in SoftMAC devices which is most likely the
-same codebase anyway.
-
-While new firmwares will /announce/ radiotap header support using the
-"rtap" fw capability string it seems no string was added for the new
-ucode header format.
-
-All above means that:
-1) We need new format support when dealing with a received frame
-2) A new feature bit & mapping quirks have to be added manually
-
-As for now only an empty radiotap is being created. Adding support for
-extracting some info (band, channel, signal, etc.) is planned for the
-future.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/core.c | 55 +++++++++++++++++++
- .../broadcom/brcm80211/brcmfmac/feature.c | 4 ++
- .../broadcom/brcm80211/brcmfmac/feature.h | 4 +-
- 3 files changed, 62 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -43,6 +43,36 @@
-
- #define BRCMF_BSSIDX_INVALID -1
-
-+#define RXS_PBPRES BIT(2)
-+
-+#define D11_PHY_HDR_LEN 6
-+
-+struct d11rxhdr_le {
-+ __le16 RxFrameSize;
-+ u16 PAD;
-+ __le16 PhyRxStatus_0;
-+ __le16 PhyRxStatus_1;
-+ __le16 PhyRxStatus_2;
-+ __le16 PhyRxStatus_3;
-+ __le16 PhyRxStatus_4;
-+ __le16 PhyRxStatus_5;
-+ __le16 RxStatus1;
-+ __le16 RxStatus2;
-+ __le16 RxTSFTime;
-+ __le16 RxChan;
-+ u8 unknown[12];
-+} __packed;
-+
-+struct wlc_d11rxhdr {
-+ struct d11rxhdr_le rxhdr;
-+ __le32 tsf_l;
-+ s8 rssi;
-+ s8 rxpwr0;
-+ s8 rxpwr1;
-+ s8 do_rssi_ma;
-+ s8 rxpwr[4];
-+} __packed;
-+
- char *brcmf_ifname(struct brcmf_if *ifp)
- {
- if (!ifp)
-@@ -409,6 +439,31 @@ void brcmf_netif_mon_rx(struct brcmf_if
- {
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FMT_RADIOTAP)) {
- /* Do nothing */
-+ } else if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FMT_HW_RX_HDR)) {
-+ struct wlc_d11rxhdr *wlc_rxhdr = (struct wlc_d11rxhdr *)skb->data;
-+ struct ieee80211_radiotap_header *radiotap;
-+ unsigned int offset;
-+ u16 RxStatus1;
-+
-+ RxStatus1 = le16_to_cpu(wlc_rxhdr->rxhdr.RxStatus1);
-+
-+ offset = sizeof(struct wlc_d11rxhdr);
-+ /* MAC inserts 2 pad bytes for a4 headers or QoS or A-MSDU
-+ * subframes
-+ */
-+ if (RxStatus1 & RXS_PBPRES)
-+ offset += 2;
-+ offset += D11_PHY_HDR_LEN;
-+
-+ skb_pull(skb, offset);
-+
-+ /* TODO: use RX header to fill some radiotap data */
-+ radiotap = skb_push(skb, sizeof(*radiotap));
-+ memset(radiotap, 0, sizeof(*radiotap));
-+ radiotap->it_len = cpu_to_le16(sizeof(*radiotap));
-+
-+ /* TODO: 4 bytes with receive status? */
-+ skb->len -= 4;
- } else {
- struct ieee80211_radiotap_header *radiotap;
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
-@@ -103,6 +103,10 @@ static const struct brcmf_feat_fwfeat br
- { "01-6cb8e269", BIT(BRCMF_FEAT_MONITOR) },
- /* brcmfmac4366b-pcie.bin from linux-firmware.git commit 52442afee990 */
- { "01-c47a91a4", BIT(BRCMF_FEAT_MONITOR) },
-+ /* brcmfmac4366b-pcie.bin from linux-firmware.git commit 211de1679a68 */
-+ { "01-801fb449", BIT(BRCMF_FEAT_MONITOR_FMT_HW_RX_HDR) },
-+ /* brcmfmac4366c-pcie.bin from linux-firmware.git commit 211de1679a68 */
-+ { "01-d2cbb8fd", BIT(BRCMF_FEAT_MONITOR_FMT_HW_RX_HDR) },
- };
-
- static void brcmf_feat_firmware_overrides(struct brcmf_pub *drv)
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
-@@ -35,6 +35,7 @@
- * FWSUP: Firmware supplicant.
- * MONITOR: firmware can pass monitor packets to host.
- * MONITOR_FMT_RADIOTAP: firmware provides monitor packets with radiotap header
-+ * MONITOR_FMT_HW_RX_HDR: firmware provides monitor packets with hw/ucode header
- */
- #define BRCMF_FEAT_LIST \
- BRCMF_FEAT_DEF(MBSS) \
-@@ -52,7 +53,8 @@
- BRCMF_FEAT_DEF(GSCAN) \
- BRCMF_FEAT_DEF(FWSUP) \
- BRCMF_FEAT_DEF(MONITOR) \
-- BRCMF_FEAT_DEF(MONITOR_FMT_RADIOTAP)
-+ BRCMF_FEAT_DEF(MONITOR_FMT_RADIOTAP) \
-+ BRCMF_FEAT_DEF(MONITOR_FMT_HW_RX_HDR)
-
- /*
- * Quirks:
diff --git a/package/kernel/mac80211/patches/brcm/349-v5.1-0001-brcmfmac-assure-SSID-length-from-firmware-is-limited.patch b/package/kernel/mac80211/patches/brcm/349-v5.1-0001-brcmfmac-assure-SSID-length-from-firmware-is-limited.patch
deleted file mode 100644
index 78db26870b..0000000000
--- a/package/kernel/mac80211/patches/brcm/349-v5.1-0001-brcmfmac-assure-SSID-length-from-firmware-is-limited.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 1b5e2423164b3670e8bc9174e4762d297990deff Mon Sep 17 00:00:00 2001
-From: Arend van Spriel <arend.vanspriel@broadcom.com>
-Date: Thu, 14 Feb 2019 13:43:47 +0100
-Subject: [PATCH] brcmfmac: assure SSID length from firmware is limited
-
-The SSID length as received from firmware should not exceed
-IEEE80211_MAX_SSID_LEN as that would result in heap overflow.
-
-Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
-Reviewed-by: Franky Lin <franky.lin@broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -3499,6 +3499,8 @@ brcmf_wowl_nd_results(struct brcmf_if *i
- }
-
- netinfo = brcmf_get_netinfo_array(pfn_result);
-+ if (netinfo->SSID_len > IEEE80211_MAX_SSID_LEN)
-+ netinfo->SSID_len = IEEE80211_MAX_SSID_LEN;
- memcpy(cfg->wowl.nd->ssid.ssid, netinfo->SSID, netinfo->SSID_len);
- cfg->wowl.nd->ssid.ssid_len = netinfo->SSID_len;
- cfg->wowl.nd->n_channels = 1;
diff --git a/package/kernel/mac80211/patches/brcm/349-v5.1-0002-brcmfmac-add-subtype-check-for-event-handling-in-dat.patch b/package/kernel/mac80211/patches/brcm/349-v5.1-0002-brcmfmac-add-subtype-check-for-event-handling-in-dat.patch
deleted file mode 100644
index 57946dabed..0000000000
--- a/package/kernel/mac80211/patches/brcm/349-v5.1-0002-brcmfmac-add-subtype-check-for-event-handling-in-dat.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From a4176ec356c73a46c07c181c6d04039fafa34a9f Mon Sep 17 00:00:00 2001
-From: Arend van Spriel <arend.vanspriel@broadcom.com>
-Date: Thu, 14 Feb 2019 13:43:48 +0100
-Subject: [PATCH] brcmfmac: add subtype check for event handling in data path
-
-For USB there is no separate channel being used to pass events
-from firmware to the host driver and as such are passed over the
-data path. In order to detect mock event messages an additional
-check is needed on event subtype. This check is added conditionally
-using unlikely() keyword.
-
-Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
-Reviewed-by: Franky Lin <franky.lin@broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/core.c | 5 +++--
- .../wireless/broadcom/brcm80211/brcmfmac/fweh.h | 16 ++++++++++++----
- .../broadcom/brcm80211/brcmfmac/msgbuf.c | 2 +-
- 3 files changed, 16 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -519,7 +519,8 @@ void brcmf_rx_frame(struct device *dev,
- } else {
- /* Process special event packets */
- if (handle_event)
-- brcmf_fweh_process_skb(ifp->drvr, skb);
-+ brcmf_fweh_process_skb(ifp->drvr, skb,
-+ BCMILCP_SUBTYPE_VENDOR_LONG);
-
- brcmf_netif_rx(ifp, skb);
- }
-@@ -536,7 +537,7 @@ void brcmf_rx_event(struct device *dev,
- if (brcmf_rx_hdrpull(drvr, skb, &ifp))
- return;
-
-- brcmf_fweh_process_skb(ifp->drvr, skb);
-+ brcmf_fweh_process_skb(ifp->drvr, skb, 0);
- brcmu_pkt_buf_free_skb(skb);
- }
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
-@@ -211,7 +211,7 @@ enum brcmf_fweh_event_code {
- */
- #define BRCM_OUI "\x00\x10\x18"
- #define BCMILCP_BCM_SUBTYPE_EVENT 1
--
-+#define BCMILCP_SUBTYPE_VENDOR_LONG 32769
-
- /**
- * struct brcm_ethhdr - broadcom specific ether header.
-@@ -334,10 +334,10 @@ void brcmf_fweh_process_event(struct brc
- void brcmf_fweh_p2pdev_setup(struct brcmf_if *ifp, bool ongoing);
-
- static inline void brcmf_fweh_process_skb(struct brcmf_pub *drvr,
-- struct sk_buff *skb)
-+ struct sk_buff *skb, u16 stype)
- {
- struct brcmf_event *event_packet;
-- u16 usr_stype;
-+ u16 subtype, usr_stype;
-
- /* only process events when protocol matches */
- if (skb->protocol != cpu_to_be16(ETH_P_LINK_CTL))
-@@ -346,8 +346,16 @@ static inline void brcmf_fweh_process_sk
- if ((skb->len + ETH_HLEN) < sizeof(*event_packet))
- return;
-
-- /* check for BRCM oui match */
- event_packet = (struct brcmf_event *)skb_mac_header(skb);
-+
-+ /* check subtype if needed */
-+ if (unlikely(stype)) {
-+ subtype = get_unaligned_be16(&event_packet->hdr.subtype);
-+ if (subtype != stype)
-+ return;
-+ }
-+
-+ /* check for BRCM oui match */
- if (memcmp(BRCM_OUI, &event_packet->hdr.oui[0],
- sizeof(event_packet->hdr.oui)))
- return;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-@@ -1116,7 +1116,7 @@ static void brcmf_msgbuf_process_event(s
-
- skb->protocol = eth_type_trans(skb, ifp->ndev);
-
-- brcmf_fweh_process_skb(ifp->drvr, skb);
-+ brcmf_fweh_process_skb(ifp->drvr, skb, 0);
-
- exit:
- brcmu_pkt_buf_free_skb(skb);
diff --git a/package/kernel/mac80211/patches/brcm/349-v5.1-0003-brcmfmac-create-debugfs-files-for-bus-specific-layer.patch b/package/kernel/mac80211/patches/brcm/349-v5.1-0003-brcmfmac-create-debugfs-files-for-bus-specific-layer.patch
deleted file mode 100644
index b58ec4b7e9..0000000000
--- a/package/kernel/mac80211/patches/brcm/349-v5.1-0003-brcmfmac-create-debugfs-files-for-bus-specific-layer.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From aaf6a5e86e36766abbeedf220462bde8031f9a72 Mon Sep 17 00:00:00 2001
-From: Arend van Spriel <arend.vanspriel@broadcom.com>
-Date: Thu, 14 Feb 2019 13:43:49 +0100
-Subject: [PATCH] brcmfmac: create debugfs files for bus-specific layer
-
-Since we moved the drivers debugfs directory under ieee80211 debugfs the
-debugfs entries need to be added after wiphy_register() has been called.
-For most part that has been done accordingly, but for the debugfs entries
-added by SDIO it was not and failed silently. This patch fixes that by
-adding a bus-layer callback for it.
-
-Fixes: 856d5a011c86 ("brcmfmac: allocate struct brcmf_pub instance using wiphy_new()")
-Reported-by: Russel King <linux@armlinux.org.uk>
-Reviewed-by: Franky Lin <franky.lin@broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 10 ++++++++++
- .../net/wireless/broadcom/brcm80211/brcmfmac/core.c | 1 +
- .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 12 +++++++-----
- 3 files changed, 18 insertions(+), 5 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-@@ -90,6 +90,7 @@ struct brcmf_bus_ops {
- int (*get_memdump)(struct device *dev, void *data, size_t len);
- int (*get_fwname)(struct device *dev, const char *ext,
- unsigned char *fw_name);
-+ void (*debugfs_create)(struct device *dev);
- };
-
-
-@@ -235,6 +236,15 @@ int brcmf_bus_get_fwname(struct brcmf_bu
- return bus->ops->get_fwname(bus->dev, ext, fw_name);
- }
-
-+static inline
-+void brcmf_bus_debugfs_create(struct brcmf_bus *bus)
-+{
-+ if (!bus->ops->debugfs_create)
-+ return;
-+
-+ return bus->ops->debugfs_create(bus->dev);
-+}
-+
- /*
- * interface functions from common layer
- */
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1177,6 +1177,7 @@ static int brcmf_bus_started(struct brcm
- brcmf_debugfs_add_entry(drvr, "revinfo", brcmf_revinfo_read);
- brcmf_feat_debugfs_create(drvr);
- brcmf_proto_debugfs_create(drvr);
-+ brcmf_bus_debugfs_create(bus_if);
-
- return 0;
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -3143,9 +3143,12 @@ static int brcmf_debugfs_sdio_count_read
- return 0;
- }
-
--static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
-+static void brcmf_sdio_debugfs_create(struct device *dev)
- {
-- struct brcmf_pub *drvr = bus->sdiodev->bus_if->drvr;
-+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-+ struct brcmf_pub *drvr = bus_if->drvr;
-+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
-+ struct brcmf_sdio *bus = sdiodev->bus;
- struct dentry *dentry = brcmf_debugfs_get_devdir(drvr);
-
- if (IS_ERR_OR_NULL(dentry))
-@@ -3165,7 +3168,7 @@ static int brcmf_sdio_checkdied(struct b
- return 0;
- }
-
--static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
-+static void brcmf_sdio_debugfs_create(struct device *dev)
- {
- }
- #endif /* DEBUG */
-@@ -3477,8 +3480,6 @@ static int brcmf_sdio_bus_preinit(struct
- if (bus->rxbuf)
- bus->rxblen = value;
-
-- brcmf_sdio_debugfs_create(bus);
--
- /* the commands below use the terms tx and rx from
- * a device perspective, ie. bus:txglom affects the
- * bus transfers from device to host.
-@@ -4088,6 +4089,7 @@ static const struct brcmf_bus_ops brcmf_
- .get_ramsize = brcmf_sdio_bus_get_ramsize,
- .get_memdump = brcmf_sdio_bus_get_memdump,
- .get_fwname = brcmf_sdio_get_fwname,
-+ .debugfs_create = brcmf_sdio_debugfs_create
- };
-
- #define BRCMF_SDIO_FW_CODE 0
diff --git a/package/kernel/mac80211/patches/brcm/349-v5.1-0004-brcmfmac-disable-MBSS-feature-for-bcm4330-device.patch b/package/kernel/mac80211/patches/brcm/349-v5.1-0004-brcmfmac-disable-MBSS-feature-for-bcm4330-device.patch
deleted file mode 100644
index e6602d7900..0000000000
--- a/package/kernel/mac80211/patches/brcm/349-v5.1-0004-brcmfmac-disable-MBSS-feature-for-bcm4330-device.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 92d3b88b1029c46f9bf27302c502dc0e3541805b Mon Sep 17 00:00:00 2001
-From: Arend van Spriel <arend.vanspriel@broadcom.com>
-Date: Thu, 14 Feb 2019 13:43:50 +0100
-Subject: [PATCH] brcmfmac: disable MBSS feature for bcm4330 device
-
-The MBSS feature was already disabled for bcm43362 as it resulted in a
-beacon with BRCM_TEST_SSID regardless user configuration in hostapd. Now
-the same has been reported for bcm4330 so disable the feature for this
-device as well.
-
-Reported-by: Russell King <linux@armlinux.org.uk>
-Tested-by: Christopher Martin <chrsmrtn@gmail.com>
-Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
-Reviewed-by: Franky Lin <franky.lin@broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
-@@ -272,9 +272,15 @@ void brcmf_feat_attach(struct brcmf_pub
- BIT(BRCMF_FEAT_WOWL_GTK);
- }
- }
-- /* MBSS does not work for 43362 */
-- if (drvr->bus_if->chip == BRCM_CC_43362_CHIP_ID)
-+ /* MBSS does not work for all chips */
-+ switch (drvr->bus_if->chip) {
-+ case BRCM_CC_4330_CHIP_ID:
-+ case BRCM_CC_43362_CHIP_ID:
- ifp->drvr->feat_flags &= ~BIT(BRCMF_FEAT_MBSS);
-+ break;
-+ default:
-+ break;
-+ }
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_RSDB, "rsdb_mode");
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_TDLS, "tdls_enable");
- brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MFP, "mfp");
diff --git a/package/kernel/mac80211/patches/brcm/349-v5.1-0005-brcmfmac-check-and-dump-trap-info-during-sdio-probe.patch b/package/kernel/mac80211/patches/brcm/349-v5.1-0005-brcmfmac-check-and-dump-trap-info-during-sdio-probe.patch
deleted file mode 100644
index dce4331585..0000000000
--- a/package/kernel/mac80211/patches/brcm/349-v5.1-0005-brcmfmac-check-and-dump-trap-info-during-sdio-probe.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 4ab2cf03da91785f2c34d79a302e53da06928bc1 Mon Sep 17 00:00:00 2001
-From: Arend van Spriel <arend.vanspriel@broadcom.com>
-Date: Thu, 14 Feb 2019 13:43:51 +0100
-Subject: [PATCH] brcmfmac: check and dump trap info during sdio probe
-
-When the firmware crashes during the probe sequence we provide little
-information on what really failed. This patch checks the sdpcm shared
-location and show the trap information if a firmware trap has happened.
-
-Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
-Reviewed-by: Franky Lin <franky.lin@broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/sdio.c | 59 +++++++++++++------
- 1 file changed, 40 insertions(+), 19 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -2999,21 +2999,35 @@ static int brcmf_sdio_trap_info(struct s
- if (error < 0)
- return error;
-
-- seq_printf(seq,
-- "dongle trap info: type 0x%x @ epc 0x%08x\n"
-- " cpsr 0x%08x spsr 0x%08x sp 0x%08x\n"
-- " lr 0x%08x pc 0x%08x offset 0x%x\n"
-- " r0 0x%08x r1 0x%08x r2 0x%08x r3 0x%08x\n"
-- " r4 0x%08x r5 0x%08x r6 0x%08x r7 0x%08x\n",
-- le32_to_cpu(tr.type), le32_to_cpu(tr.epc),
-- le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr),
-- le32_to_cpu(tr.r13), le32_to_cpu(tr.r14),
-- le32_to_cpu(tr.pc), sh->trap_addr,
-- le32_to_cpu(tr.r0), le32_to_cpu(tr.r1),
-- le32_to_cpu(tr.r2), le32_to_cpu(tr.r3),
-- le32_to_cpu(tr.r4), le32_to_cpu(tr.r5),
-- le32_to_cpu(tr.r6), le32_to_cpu(tr.r7));
--
-+ if (seq)
-+ seq_printf(seq,
-+ "dongle trap info: type 0x%x @ epc 0x%08x\n"
-+ " cpsr 0x%08x spsr 0x%08x sp 0x%08x\n"
-+ " lr 0x%08x pc 0x%08x offset 0x%x\n"
-+ " r0 0x%08x r1 0x%08x r2 0x%08x r3 0x%08x\n"
-+ " r4 0x%08x r5 0x%08x r6 0x%08x r7 0x%08x\n",
-+ le32_to_cpu(tr.type), le32_to_cpu(tr.epc),
-+ le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr),
-+ le32_to_cpu(tr.r13), le32_to_cpu(tr.r14),
-+ le32_to_cpu(tr.pc), sh->trap_addr,
-+ le32_to_cpu(tr.r0), le32_to_cpu(tr.r1),
-+ le32_to_cpu(tr.r2), le32_to_cpu(tr.r3),
-+ le32_to_cpu(tr.r4), le32_to_cpu(tr.r5),
-+ le32_to_cpu(tr.r6), le32_to_cpu(tr.r7));
-+ else
-+ pr_debug("dongle trap info: type 0x%x @ epc 0x%08x\n"
-+ " cpsr 0x%08x spsr 0x%08x sp 0x%08x\n"
-+ " lr 0x%08x pc 0x%08x offset 0x%x\n"
-+ " r0 0x%08x r1 0x%08x r2 0x%08x r3 0x%08x\n"
-+ " r4 0x%08x r5 0x%08x r6 0x%08x r7 0x%08x\n",
-+ le32_to_cpu(tr.type), le32_to_cpu(tr.epc),
-+ le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr),
-+ le32_to_cpu(tr.r13), le32_to_cpu(tr.r14),
-+ le32_to_cpu(tr.pc), sh->trap_addr,
-+ le32_to_cpu(tr.r0), le32_to_cpu(tr.r1),
-+ le32_to_cpu(tr.r2), le32_to_cpu(tr.r3),
-+ le32_to_cpu(tr.r4), le32_to_cpu(tr.r5),
-+ le32_to_cpu(tr.r6), le32_to_cpu(tr.r7));
- return 0;
- }
-
-@@ -3067,8 +3081,10 @@ static int brcmf_sdio_checkdied(struct b
- else if (sh.flags & SDPCM_SHARED_ASSERT)
- brcmf_err("assertion in dongle\n");
-
-- if (sh.flags & SDPCM_SHARED_TRAP)
-+ if (sh.flags & SDPCM_SHARED_TRAP) {
- brcmf_err("firmware trap in dongle\n");
-+ brcmf_sdio_trap_info(NULL, bus, &sh);
-+ }
-
- return 0;
- }
-@@ -4199,7 +4215,7 @@ static void brcmf_sdio_firmware_callback
- } else {
- /* Disable F2 again */
- sdio_disable_func(sdiod->func2);
-- goto release;
-+ goto checkdied;
- }
-
- if (brcmf_chip_sr_capable(bus->ci)) {
-@@ -4220,8 +4236,10 @@ static void brcmf_sdio_firmware_callback
- }
-
- /* If we didn't come up, turn off backplane clock */
-- if (err != 0)
-+ if (err != 0) {
- brcmf_sdio_clkctl(bus, CLK_NONE, false);
-+ goto checkdied;
-+ }
-
- sdio_release_host(sdiod->func1);
-
-@@ -4235,12 +4253,15 @@ static void brcmf_sdio_firmware_callback
- err = brcmf_attach(sdiod->dev, sdiod->settings);
- if (err != 0) {
- brcmf_err("brcmf_attach failed\n");
-- goto fail;
-+ sdio_claim_host(sdiod->func1);
-+ goto checkdied;
- }
-
- /* ready */
- return;
-
-+checkdied:
-+ brcmf_sdio_checkdied(bus);
- release:
- sdio_release_host(sdiod->func1);
- fail:
diff --git a/package/kernel/mac80211/patches/brcm/349-v5.1-0006-brcmfmac-use-chipname-in-brcmf_fw_alloc_request-for-.patch b/package/kernel/mac80211/patches/brcm/349-v5.1-0006-brcmfmac-use-chipname-in-brcmf_fw_alloc_request-for-.patch
deleted file mode 100644
index 23180c7236..0000000000
--- a/package/kernel/mac80211/patches/brcm/349-v5.1-0006-brcmfmac-use-chipname-in-brcmf_fw_alloc_request-for-.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From a250c91c1762e85c736e67cb4a9a95ebae72e62d Mon Sep 17 00:00:00 2001
-From: Arend van Spriel <arend.vanspriel@broadcom.com>
-Date: Thu, 14 Feb 2019 13:43:52 +0100
-Subject: [PATCH] brcmfmac: use chipname in brcmf_fw_alloc_request() for error
- path as well
-
-The local variable chipname is string representation of chip id and revision
-which is printed in the good flow of brcmf_fw_alloc_request(). Also use it
-for the error path, ie. for unknown/unsupported devices.
-
-Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
-Reviewed-by: Franky Lin <franky.lin@broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -719,8 +719,10 @@ brcmf_fw_alloc_request(u32 chip, u32 chi
- break;
- }
-
-+ brcmf_chip_name(chip, chiprev, chipname, sizeof(chipname));
-+
- if (i == table_size) {
-- brcmf_err("Unknown chipid %d [%d]\n", chip, chiprev);
-+ brcmf_err("Unknown chip %s\n", chipname);
- return NULL;
- }
-
-@@ -729,8 +731,6 @@ brcmf_fw_alloc_request(u32 chip, u32 chi
- if (!fwreq)
- return NULL;
-
-- brcmf_chip_name(chip, chiprev, chipname, sizeof(chipname));
--
- brcmf_info("using %s for chip %s\n",
- mapping_table[i].fw_base, chipname);
-
diff --git a/package/kernel/mac80211/patches/brcm/350-v5.1-brcmfmac-print-firmware-reported-ring-status-errors.patch b/package/kernel/mac80211/patches/brcm/350-v5.1-brcmfmac-print-firmware-reported-ring-status-errors.patch
deleted file mode 100644
index b41b9cebf4..0000000000
--- a/package/kernel/mac80211/patches/brcm/350-v5.1-brcmfmac-print-firmware-reported-ring-status-errors.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From c988b78244df8216902e20de536434e2f474a37e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 8 Feb 2019 15:24:39 +0100
-Subject: [PATCH] brcmfmac: print firmware reported ring status errors
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Firmware is capable of reporting ring status. It's used e.g. to signal
-some problem with a specific ring setup. This patch adds support for
-printing ring & error number which may be useful for debugging setup
-issues.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/msgbuf.c | 25 +++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-@@ -134,6 +134,14 @@ struct msgbuf_completion_hdr {
- __le16 flow_ring_id;
- };
-
-+/* Data struct for the MSGBUF_TYPE_RING_STATUS */
-+struct msgbuf_ring_status {
-+ struct msgbuf_common_hdr msg;
-+ struct msgbuf_completion_hdr compl_hdr;
-+ __le16 write_idx;
-+ __le32 rsvd0[5];
-+};
-+
- struct msgbuf_rx_event {
- struct msgbuf_common_hdr msg;
- struct msgbuf_completion_hdr compl_hdr;
-@@ -1180,6 +1188,19 @@ brcmf_msgbuf_process_rx_complete(struct
- brcmf_netif_rx(ifp, skb);
- }
-
-+static void brcmf_msgbuf_process_ring_status(struct brcmf_msgbuf *msgbuf,
-+ void *buf)
-+{
-+ struct msgbuf_ring_status *ring_status = buf;
-+ int err;
-+
-+ err = le16_to_cpu(ring_status->compl_hdr.status);
-+ if (err) {
-+ int ring = le16_to_cpu(ring_status->compl_hdr.flow_ring_id);
-+
-+ brcmf_err("Firmware reported ring %d error: %d\n", ring, err);
-+ }
-+}
-
- static void
- brcmf_msgbuf_process_flow_ring_create_response(struct brcmf_msgbuf *msgbuf,
-@@ -1241,6 +1262,10 @@ static void brcmf_msgbuf_process_msgtype
-
- msg = (struct msgbuf_common_hdr *)buf;
- switch (msg->msgtype) {
-+ case MSGBUF_TYPE_RING_STATUS:
-+ brcmf_dbg(MSGBUF, "MSGBUF_TYPE_RING_STATUS\n");
-+ brcmf_msgbuf_process_ring_status(msgbuf, buf);
-+ break;
- case MSGBUF_TYPE_FLOW_RING_CREATE_CMPLT:
- brcmf_dbg(MSGBUF, "MSGBUF_TYPE_FLOW_RING_CREATE_CMPLT\n");
- brcmf_msgbuf_process_flow_ring_create_response(msgbuf, buf);
diff --git a/package/kernel/mac80211/patches/brcm/351-v5.1-0001-brcmfmac-improve-code-handling-bandwidth-of-firmware.patch b/package/kernel/mac80211/patches/brcm/351-v5.1-0001-brcmfmac-improve-code-handling-bandwidth-of-firmware.patch
deleted file mode 100644
index 4e49246554..0000000000
--- a/package/kernel/mac80211/patches/brcm/351-v5.1-0001-brcmfmac-improve-code-handling-bandwidth-of-firmware.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From f4e183293b871c96c0220dcc549d5ca4c72628ad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 11 Feb 2019 23:04:53 +0100
-Subject: [PATCH] brcmfmac: improve code handling bandwidth of firmware
- reported channels
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1) Use switch to simplify/improve the code & avoid some duplication
-2) Add warning for unsupported values
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 13 ++++++++++---
- 1 file changed, 10 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -6043,11 +6043,18 @@ static int brcmf_construct_chaninfo(stru
- /* assuming the chanspecs order is HT20,
- * HT40 upper, HT40 lower, and VHT80.
- */
-- if (ch.bw == BRCMU_CHAN_BW_80) {
-+ switch (ch.bw) {
-+ case BRCMU_CHAN_BW_80:
- channel->flags &= ~IEEE80211_CHAN_NO_80MHZ;
-- } else if (ch.bw == BRCMU_CHAN_BW_40) {
-+ break;
-+ case BRCMU_CHAN_BW_40:
- brcmf_update_bw40_channel_flag(channel, &ch);
-- } else {
-+ break;
-+ default:
-+ wiphy_warn(wiphy, "Firmware reported unsupported bandwidth %d\n",
-+ ch.bw);
-+ /* fall through */
-+ case BRCMU_CHAN_BW_20:
- /* enable the channel and disable other bandwidths
- * for now as mentioned order assure they are enabled
- * for subsequent chanspecs.
diff --git a/package/kernel/mac80211/patches/brcm/351-v5.1-0002-brcmfmac-support-firmware-reporting-160-MHz-channels.patch b/package/kernel/mac80211/patches/brcm/351-v5.1-0002-brcmfmac-support-firmware-reporting-160-MHz-channels.patch
deleted file mode 100644
index a809378d13..0000000000
--- a/package/kernel/mac80211/patches/brcm/351-v5.1-0002-brcmfmac-support-firmware-reporting-160-MHz-channels.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 30519cbe339a45bd11a57ca8ece07f4f6a1cda2e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 11 Feb 2019 23:04:54 +0100
-Subject: [PATCH] brcmfmac: support firmware reporting 160 MHz channels
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far 160 MHz channels were treated as 20 MHz ones which was breaking
-support for 40/80 MHz due to the brcmf_construct_chaninfo() logic and
-its assumptions.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -6044,6 +6044,9 @@ static int brcmf_construct_chaninfo(stru
- * HT40 upper, HT40 lower, and VHT80.
- */
- switch (ch.bw) {
-+ case BRCMU_CHAN_BW_160:
-+ channel->flags &= ~IEEE80211_CHAN_NO_160MHZ;
-+ break;
- case BRCMU_CHAN_BW_80:
- channel->flags &= ~IEEE80211_CHAN_NO_80MHZ;
- break;
diff --git a/package/kernel/mac80211/patches/brcm/352-v5.1-brcmfmac-rework-bphy_err-to-take-struct-brcmf_pub-ar.patch b/package/kernel/mac80211/patches/brcm/352-v5.1-brcmfmac-rework-bphy_err-to-take-struct-brcmf_pub-ar.patch
deleted file mode 100644
index 27931db840..0000000000
--- a/package/kernel/mac80211/patches/brcm/352-v5.1-brcmfmac-rework-bphy_err-to-take-struct-brcmf_pub-ar.patch
+++ /dev/null
@@ -1,2290 +0,0 @@
-From 16e646768396339b3d354985b99bcd3f1f195a7d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 15 Feb 2019 15:45:54 +0100
-Subject: [PATCH] brcmfmac: rework bphy_err() to take struct brcmf_pub argument
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This macro will be used in more places not just the cfg80211.c. It makes
-sense to pass some common struct to it as "struct wiphy" is mostly
-referenced in cfg80211 code only.
-
-A very common one (used above the bus abstraction layer) is struct
-brcmf_pub. Many functions already keep reference to it which will make
-using bphy_err() simpler. It should also allow extending that macro's
-logic if it's ever needed.
-
-This improves code recently added in the commit 3ef005b82e2a ("brcmfmac:
-add bphy_err() and use it in the cfg80211.c").
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 510 ++++++++++--------
- .../broadcom/brcm80211/brcmfmac/debug.h | 4 +-
- 2 files changed, 281 insertions(+), 233 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -457,7 +457,7 @@ static void convert_key_from_CPU(struct
- static int
- send_key_to_dongle(struct brcmf_if *ifp, struct brcmf_wsec_key *key)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- int err;
- struct brcmf_wsec_key_le key_le;
-
-@@ -469,7 +469,7 @@ send_key_to_dongle(struct brcmf_if *ifp,
- sizeof(key_le));
-
- if (err)
-- bphy_err(wiphy, "wsec_key error (%d)\n", err);
-+ bphy_err(drvr, "wsec_key error (%d)\n", err);
- return err;
- }
-
-@@ -509,7 +509,7 @@ static int brcmf_get_first_free_bsscfgid
-
- static int brcmf_cfg80211_request_ap_if(struct brcmf_if *ifp)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_mbss_ssid_le mbss_ssid_le;
- int bsscfgidx;
- int err;
-@@ -526,7 +526,7 @@ static int brcmf_cfg80211_request_ap_if(
- err = brcmf_fil_bsscfg_data_set(ifp, "bsscfg:ssid", &mbss_ssid_le,
- sizeof(mbss_ssid_le));
- if (err < 0)
-- bphy_err(wiphy, "setting ssid failed %d\n", err);
-+ bphy_err(drvr, "setting ssid failed %d\n", err);
-
- return err;
- }
-@@ -544,6 +544,7 @@ struct wireless_dev *brcmf_ap_add_vif(st
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_cfg80211_vif *vif;
- int err;
-
-@@ -569,7 +570,7 @@ struct wireless_dev *brcmf_ap_add_vif(st
- BRCMF_VIF_EVENT_TIMEOUT);
- brcmf_cfg80211_arm_vif_event(cfg, NULL);
- if (!err) {
-- bphy_err(wiphy, "timeout occurred\n");
-+ bphy_err(drvr, "timeout occurred\n");
- err = -EIO;
- goto fail;
- }
-@@ -577,7 +578,7 @@ struct wireless_dev *brcmf_ap_add_vif(st
- /* interface created in firmware */
- ifp = vif->ifp;
- if (!ifp) {
-- bphy_err(wiphy, "no if pointer provided\n");
-+ bphy_err(drvr, "no if pointer provided\n");
- err = -ENOENT;
- goto fail;
- }
-@@ -585,7 +586,7 @@ struct wireless_dev *brcmf_ap_add_vif(st
- strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1);
- err = brcmf_net_attach(ifp, true);
- if (err) {
-- bphy_err(wiphy, "Registering netdevice failed\n");
-+ bphy_err(drvr, "Registering netdevice failed\n");
- free_netdev(ifp->ndev);
- goto fail;
- }
-@@ -616,13 +617,15 @@ static struct wireless_dev *brcmf_cfg802
- enum nl80211_iftype type,
- struct vif_params *params)
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct wireless_dev *wdev;
- int err;
-
- brcmf_dbg(TRACE, "enter: %s type %d\n", name, type);
- err = brcmf_vif_add_validate(wiphy_to_cfg(wiphy), type);
- if (err) {
-- bphy_err(wiphy, "iface validation failed: err=%d\n", err);
-+ bphy_err(drvr, "iface validation failed: err=%d\n", err);
- return ERR_PTR(err);
- }
- switch (type) {
-@@ -647,7 +650,7 @@ static struct wireless_dev *brcmf_cfg802
- }
-
- if (IS_ERR(wdev))
-- bphy_err(wiphy, "add iface %s type %d failed: err=%d\n", name,
-+ bphy_err(drvr, "add iface %s type %d failed: err=%d\n", name,
- type, (int)PTR_ERR(wdev));
- else
- brcmf_cfg80211_update_proto_addr_mode(wdev);
-@@ -663,13 +666,13 @@ static void brcmf_scan_config_mpc(struct
-
- void brcmf_set_mpc(struct brcmf_if *ifp, int mpc)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- s32 err = 0;
-
- if (check_vif_up(ifp->vif)) {
- err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc);
- if (err) {
-- bphy_err(wiphy, "fail to set mpc\n");
-+ bphy_err(drvr, "fail to set mpc\n");
- return;
- }
- brcmf_dbg(INFO, "MPC : %d\n", mpc);
-@@ -680,7 +683,7 @@ s32 brcmf_notify_escan_complete(struct b
- struct brcmf_if *ifp, bool aborted,
- bool fw_abort)
- {
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_scan_params_le params_le;
- struct cfg80211_scan_request *scan_request;
- u64 reqid;
-@@ -715,7 +718,7 @@ s32 brcmf_notify_escan_complete(struct b
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN,
- &params_le, sizeof(params_le));
- if (err)
-- bphy_err(wiphy, "Scan abort failed\n");
-+ bphy_err(drvr, "Scan abort failed\n");
- }
-
- brcmf_scan_config_mpc(ifp, 1);
-@@ -760,6 +763,7 @@ static int brcmf_cfg80211_del_ap_iface(s
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct net_device *ndev = wdev->netdev;
- struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct brcmf_pub *drvr = cfg->pub;
- int ret;
- int err;
-
-@@ -767,7 +771,7 @@ static int brcmf_cfg80211_del_ap_iface(s
-
- err = brcmf_fil_bsscfg_data_set(ifp, "interface_remove", NULL, 0);
- if (err) {
-- bphy_err(wiphy, "interface_remove failed %d\n", err);
-+ bphy_err(drvr, "interface_remove failed %d\n", err);
- goto err_unarm;
- }
-
-@@ -775,7 +779,7 @@ static int brcmf_cfg80211_del_ap_iface(s
- ret = brcmf_cfg80211_wait_vif_event(cfg, BRCMF_E_IF_DEL,
- BRCMF_VIF_EVENT_TIMEOUT);
- if (!ret) {
-- bphy_err(wiphy, "timeout occurred\n");
-+ bphy_err(drvr, "timeout occurred\n");
- err = -EIO;
- goto err_unarm;
- }
-@@ -838,6 +842,7 @@ brcmf_cfg80211_change_iface(struct wiphy
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_cfg80211_vif *vif = ifp->vif;
-+ struct brcmf_pub *drvr = cfg->pub;
- s32 infra = 0;
- s32 ap = 0;
- s32 err = 0;
-@@ -877,13 +882,13 @@ brcmf_cfg80211_change_iface(struct wiphy
- }
- err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type);
- if (err) {
-- bphy_err(wiphy, "iface validation failed: err=%d\n", err);
-+ bphy_err(drvr, "iface validation failed: err=%d\n", err);
- return err;
- }
- switch (type) {
- case NL80211_IFTYPE_MONITOR:
- case NL80211_IFTYPE_WDS:
-- bphy_err(wiphy, "type (%d) : currently we do not support this type\n",
-+ bphy_err(drvr, "type (%d) : currently we do not support this type\n",
- type);
- return -EOPNOTSUPP;
- case NL80211_IFTYPE_ADHOC:
-@@ -912,7 +917,7 @@ brcmf_cfg80211_change_iface(struct wiphy
- } else {
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, infra);
- if (err) {
-- bphy_err(wiphy, "WLC_SET_INFRA error (%d)\n", err);
-+ bphy_err(drvr, "WLC_SET_INFRA error (%d)\n", err);
- err = -EAGAIN;
- goto done;
- }
-@@ -1003,7 +1008,7 @@ static s32
- brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp,
- struct cfg80211_scan_request *request)
- {
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
- s32 params_size = BRCMF_SCAN_PARAMS_FIXED_SIZE +
- offsetof(struct brcmf_escan_params_le, params_le);
- struct brcmf_escan_params_le *params;
-@@ -1035,7 +1040,7 @@ brcmf_run_escan(struct brcmf_cfg80211_in
- if (err == -EBUSY)
- brcmf_dbg(INFO, "system busy : escan canceled\n");
- else
-- bphy_err(wiphy, "error (%d)\n", err);
-+ bphy_err(drvr, "error (%d)\n", err);
- }
-
- kfree(params);
-@@ -1072,6 +1077,7 @@ static s32
- brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_cfg80211_vif *vif;
- s32 err = 0;
-
-@@ -1081,22 +1087,22 @@ brcmf_cfg80211_scan(struct wiphy *wiphy,
- return -EIO;
-
- if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
-- bphy_err(wiphy, "Scanning already: status (%lu)\n",
-+ bphy_err(drvr, "Scanning already: status (%lu)\n",
- cfg->scan_status);
- return -EAGAIN;
- }
- if (test_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status)) {
-- bphy_err(wiphy, "Scanning being aborted: status (%lu)\n",
-+ bphy_err(drvr, "Scanning being aborted: status (%lu)\n",
- cfg->scan_status);
- return -EAGAIN;
- }
- if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) {
-- bphy_err(wiphy, "Scanning suppressed: status (%lu)\n",
-+ bphy_err(drvr, "Scanning suppressed: status (%lu)\n",
- cfg->scan_status);
- return -EAGAIN;
- }
- if (test_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state)) {
-- bphy_err(wiphy, "Connecting: status (%lu)\n", vif->sme_state);
-+ bphy_err(drvr, "Connecting: status (%lu)\n", vif->sme_state);
- return -EAGAIN;
- }
-
-@@ -1130,7 +1136,7 @@ brcmf_cfg80211_scan(struct wiphy *wiphy,
- return 0;
-
- scan_out:
-- bphy_err(wiphy, "scan error (%d)\n", err);
-+ bphy_err(drvr, "scan error (%d)\n", err);
- clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
- cfg->scan_request = NULL;
- return err;
-@@ -1139,12 +1145,12 @@ scan_out:
- static s32 brcmf_set_rts(struct net_device *ndev, u32 rts_threshold)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- s32 err = 0;
-
- err = brcmf_fil_iovar_int_set(ifp, "rtsthresh", rts_threshold);
- if (err)
-- bphy_err(wiphy, "Error (%d)\n", err);
-+ bphy_err(drvr, "Error (%d)\n", err);
-
- return err;
- }
-@@ -1152,13 +1158,13 @@ static s32 brcmf_set_rts(struct net_devi
- static s32 brcmf_set_frag(struct net_device *ndev, u32 frag_threshold)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- s32 err = 0;
-
- err = brcmf_fil_iovar_int_set(ifp, "fragthresh",
- frag_threshold);
- if (err)
-- bphy_err(wiphy, "Error (%d)\n", err);
-+ bphy_err(drvr, "Error (%d)\n", err);
-
- return err;
- }
-@@ -1166,13 +1172,13 @@ static s32 brcmf_set_frag(struct net_dev
- static s32 brcmf_set_retry(struct net_device *ndev, u32 retry, bool l)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- s32 err = 0;
- u32 cmd = (l ? BRCMF_C_SET_LRL : BRCMF_C_SET_SRL);
-
- err = brcmf_fil_cmd_int_set(ifp, cmd, retry);
- if (err) {
-- bphy_err(wiphy, "cmd (%d) , error (%d)\n", cmd, err);
-+ bphy_err(drvr, "cmd (%d) , error (%d)\n", cmd, err);
- return err;
- }
- return err;
-@@ -1248,7 +1254,7 @@ static u16 brcmf_map_fw_linkdown_reason(
-
- static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_wsec_pmk_le pmk;
- int i, err;
-
-@@ -1262,7 +1268,7 @@ static int brcmf_set_pmk(struct brcmf_if
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_WSEC_PMK,
- &pmk, sizeof(pmk));
- if (err < 0)
-- bphy_err(wiphy, "failed to change PSK in firmware (len=%u)\n",
-+ bphy_err(drvr, "failed to change PSK in firmware (len=%u)\n",
- pmk_len);
-
- return err;
-@@ -1271,7 +1277,7 @@ static int brcmf_set_pmk(struct brcmf_if
- static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason)
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
- s32 err = 0;
-
- brcmf_dbg(TRACE, "Enter\n");
-@@ -1281,7 +1287,7 @@ static void brcmf_link_down(struct brcmf
- err = brcmf_fil_cmd_data_set(vif->ifp,
- BRCMF_C_DISASSOC, NULL, 0);
- if (err) {
-- bphy_err(wiphy, "WLC_DISASSOC failed (%d)\n", err);
-+ bphy_err(drvr, "WLC_DISASSOC failed (%d)\n", err);
- }
- if ((vif->wdev.iftype == NL80211_IFTYPE_STATION) ||
- (vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT))
-@@ -1305,6 +1311,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_join_params join_params;
- size_t join_params_size = 0;
- s32 err = 0;
-@@ -1369,7 +1376,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
-
- err = brcmf_fil_iovar_int_set(ifp, "wsec", wsec);
- if (err) {
-- bphy_err(wiphy, "wsec failed (%d)\n", err);
-+ bphy_err(drvr, "wsec failed (%d)\n", err);
- goto done;
- }
-
-@@ -1381,7 +1388,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, bcnprd);
- if (err) {
-- bphy_err(wiphy, "WLC_SET_BCNPRD failed (%d)\n", err);
-+ bphy_err(drvr, "WLC_SET_BCNPRD failed (%d)\n", err);
- goto done;
- }
-
-@@ -1426,7 +1433,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_CHANNEL,
- target_channel);
- if (err) {
-- bphy_err(wiphy, "WLC_SET_CHANNEL failed (%d)\n", err);
-+ bphy_err(drvr, "WLC_SET_CHANNEL failed (%d)\n", err);
- goto done;
- }
- } else
-@@ -1438,7 +1445,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
- &join_params, join_params_size);
- if (err) {
-- bphy_err(wiphy, "WLC_SET_SSID failed (%d)\n", err);
-+ bphy_err(drvr, "WLC_SET_SSID failed (%d)\n", err);
- goto done;
- }
-
-@@ -1475,8 +1482,8 @@ static s32 brcmf_set_wpa_version(struct
- struct cfg80211_connect_params *sme)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-- struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_cfg80211_security *sec;
- s32 val = 0;
- s32 err = 0;
-@@ -1490,7 +1497,7 @@ static s32 brcmf_set_wpa_version(struct
- brcmf_dbg(CONN, "setting wpa_auth to 0x%0x\n", val);
- err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", val);
- if (err) {
-- bphy_err(wiphy, "set wpa_auth failed (%d)\n", err);
-+ bphy_err(drvr, "set wpa_auth failed (%d)\n", err);
- return err;
- }
- sec = &profile->sec;
-@@ -1502,8 +1509,8 @@ static s32 brcmf_set_auth_type(struct ne
- struct cfg80211_connect_params *sme)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-- struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_cfg80211_security *sec;
- s32 val = 0;
- s32 err = 0;
-@@ -1525,7 +1532,7 @@ static s32 brcmf_set_auth_type(struct ne
-
- err = brcmf_fil_bsscfg_int_set(ifp, "auth", val);
- if (err) {
-- bphy_err(wiphy, "set auth failed (%d)\n", err);
-+ bphy_err(drvr, "set auth failed (%d)\n", err);
- return err;
- }
- sec = &profile->sec;
-@@ -1538,8 +1545,8 @@ brcmf_set_wsec_mode(struct net_device *n
- struct cfg80211_connect_params *sme)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-- struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_cfg80211_security *sec;
- s32 pval = 0;
- s32 gval = 0;
-@@ -1562,7 +1569,7 @@ brcmf_set_wsec_mode(struct net_device *n
- pval = AES_ENABLED;
- break;
- default:
-- bphy_err(wiphy, "invalid cipher pairwise (%d)\n",
-+ bphy_err(drvr, "invalid cipher pairwise (%d)\n",
- sme->crypto.ciphers_pairwise[0]);
- return -EINVAL;
- }
-@@ -1583,7 +1590,7 @@ brcmf_set_wsec_mode(struct net_device *n
- gval = AES_ENABLED;
- break;
- default:
-- bphy_err(wiphy, "invalid cipher group (%d)\n",
-+ bphy_err(drvr, "invalid cipher group (%d)\n",
- sme->crypto.cipher_group);
- return -EINVAL;
- }
-@@ -1599,7 +1606,7 @@ brcmf_set_wsec_mode(struct net_device *n
- wsec = pval | gval;
- err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
- if (err) {
-- bphy_err(wiphy, "error (%d)\n", err);
-+ bphy_err(drvr, "error (%d)\n", err);
- return err;
- }
-
-@@ -1614,8 +1621,8 @@ static s32
- brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-- struct wiphy *wiphy = ifp->drvr->wiphy;
- struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
-+ struct brcmf_pub *drvr = ifp->drvr;
- s32 val;
- s32 err;
- const struct brcmf_tlv *rsn_ie;
-@@ -1633,7 +1640,7 @@ brcmf_set_key_mgmt(struct net_device *nd
-
- err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), "wpa_auth", &val);
- if (err) {
-- bphy_err(wiphy, "could not get wpa_auth (%d)\n", err);
-+ bphy_err(drvr, "could not get wpa_auth (%d)\n", err);
- return err;
- }
- if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) {
-@@ -1647,7 +1654,7 @@ brcmf_set_key_mgmt(struct net_device *nd
- val = WPA_AUTH_PSK;
- break;
- default:
-- bphy_err(wiphy, "invalid cipher group (%d)\n",
-+ bphy_err(drvr, "invalid cipher group (%d)\n",
- sme->crypto.cipher_group);
- return -EINVAL;
- }
-@@ -1670,7 +1677,7 @@ brcmf_set_key_mgmt(struct net_device *nd
- val = WPA2_AUTH_PSK;
- break;
- default:
-- bphy_err(wiphy, "invalid cipher group (%d)\n",
-+ bphy_err(drvr, "invalid cipher group (%d)\n",
- sme->crypto.cipher_group);
- return -EINVAL;
- }
-@@ -1717,7 +1724,7 @@ skip_mfp_config:
- brcmf_dbg(CONN, "setting wpa_auth to %d\n", val);
- err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val);
- if (err) {
-- bphy_err(wiphy, "could not set wpa_auth (%d)\n", err);
-+ bphy_err(drvr, "could not set wpa_auth (%d)\n", err);
- return err;
- }
-
-@@ -1729,7 +1736,7 @@ brcmf_set_sharedkey(struct net_device *n
- struct cfg80211_connect_params *sme)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev);
- struct brcmf_cfg80211_security *sec;
- struct brcmf_wsec_key key;
-@@ -1756,7 +1763,7 @@ brcmf_set_sharedkey(struct net_device *n
- key.len = (u32) sme->key_len;
- key.index = (u32) sme->key_idx;
- if (key.len > sizeof(key.data)) {
-- bphy_err(wiphy, "Too long key length (%u)\n", key.len);
-+ bphy_err(drvr, "Too long key length (%u)\n", key.len);
- return -EINVAL;
- }
- memcpy(key.data, sme->key, key.len);
-@@ -1769,7 +1776,7 @@ brcmf_set_sharedkey(struct net_device *n
- key.algo = CRYPTO_ALGO_WEP128;
- break;
- default:
-- bphy_err(wiphy, "Invalid algorithm (%d)\n",
-+ bphy_err(drvr, "Invalid algorithm (%d)\n",
- sme->crypto.ciphers_pairwise[0]);
- return -EINVAL;
- }
-@@ -1786,7 +1793,7 @@ brcmf_set_sharedkey(struct net_device *n
- val = WL_AUTH_SHARED_KEY; /* shared key */
- err = brcmf_fil_bsscfg_int_set(ifp, "auth", val);
- if (err)
-- bphy_err(wiphy, "set auth failed (%d)\n", err);
-+ bphy_err(drvr, "set auth failed (%d)\n", err);
- }
- return err;
- }
-@@ -1806,7 +1813,7 @@ enum nl80211_auth_type brcmf_war_auth_ty
- static void brcmf_set_join_pref(struct brcmf_if *ifp,
- struct cfg80211_bss_selection *bss_select)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_join_pref_params join_pref_params[2];
- enum nl80211_band band;
- int err, i = 0;
-@@ -1845,7 +1852,7 @@ static void brcmf_set_join_pref(struct b
- err = brcmf_fil_iovar_data_set(ifp, "join_pref", join_pref_params,
- sizeof(join_pref_params));
- if (err)
-- bphy_err(wiphy, "Set join_pref error (%d)\n", err);
-+ bphy_err(drvr, "Set join_pref error (%d)\n", err);
- }
-
- static s32
-@@ -1856,6 +1863,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
- struct ieee80211_channel *chan = sme->channel;
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_join_params join_params;
- size_t join_params_size;
- const struct brcmf_tlv *rsn_ie;
-@@ -1872,7 +1880,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
- return -EIO;
-
- if (!sme->ssid) {
-- bphy_err(wiphy, "Invalid ssid\n");
-+ bphy_err(drvr, "Invalid ssid\n");
- return -EOPNOTSUPP;
- }
-
-@@ -1901,7 +1909,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
- err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG,
- sme->ie, sme->ie_len);
- if (err)
-- bphy_err(wiphy, "Set Assoc REQ IE Failed\n");
-+ bphy_err(drvr, "Set Assoc REQ IE Failed\n");
- else
- brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n");
-
-@@ -1922,32 +1930,32 @@ brcmf_cfg80211_connect(struct wiphy *wip
-
- err = brcmf_set_wpa_version(ndev, sme);
- if (err) {
-- bphy_err(wiphy, "wl_set_wpa_version failed (%d)\n", err);
-+ bphy_err(drvr, "wl_set_wpa_version failed (%d)\n", err);
- goto done;
- }
-
- sme->auth_type = brcmf_war_auth_type(ifp, sme->auth_type);
- err = brcmf_set_auth_type(ndev, sme);
- if (err) {
-- bphy_err(wiphy, "wl_set_auth_type failed (%d)\n", err);
-+ bphy_err(drvr, "wl_set_auth_type failed (%d)\n", err);
- goto done;
- }
-
- err = brcmf_set_wsec_mode(ndev, sme);
- if (err) {
-- bphy_err(wiphy, "wl_set_set_cipher failed (%d)\n", err);
-+ bphy_err(drvr, "wl_set_set_cipher failed (%d)\n", err);
- goto done;
- }
-
- err = brcmf_set_key_mgmt(ndev, sme);
- if (err) {
-- bphy_err(wiphy, "wl_set_key_mgmt failed (%d)\n", err);
-+ bphy_err(drvr, "wl_set_key_mgmt failed (%d)\n", err);
- goto done;
- }
-
- err = brcmf_set_sharedkey(ndev, sme);
- if (err) {
-- bphy_err(wiphy, "brcmf_set_sharedkey failed (%d)\n", err);
-+ bphy_err(drvr, "brcmf_set_sharedkey failed (%d)\n", err);
- goto done;
- }
-
-@@ -1964,7 +1972,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
- /* enable firmware supplicant for this interface */
- err = brcmf_fil_iovar_int_set(ifp, "sup_wpa", 1);
- if (err < 0) {
-- bphy_err(wiphy, "failed to enable fw supplicant\n");
-+ bphy_err(drvr, "failed to enable fw supplicant\n");
- goto done;
- }
- }
-@@ -2059,7 +2067,7 @@ brcmf_cfg80211_connect(struct wiphy *wip
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
- &join_params, join_params_size);
- if (err)
-- bphy_err(wiphy, "BRCMF_C_SET_SSID failed (%d)\n", err);
-+ bphy_err(drvr, "BRCMF_C_SET_SSID failed (%d)\n", err);
-
- done:
- if (err)
-@@ -2072,8 +2080,10 @@ static s32
- brcmf_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *ndev,
- u16 reason_code)
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_scb_val_le scbval;
- s32 err = 0;
-
-@@ -2090,7 +2100,7 @@ brcmf_cfg80211_disconnect(struct wiphy *
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_DISASSOC,
- &scbval, sizeof(scbval));
- if (err)
-- bphy_err(wiphy, "error (%d)\n", err);
-+ bphy_err(drvr, "error (%d)\n", err);
-
- brcmf_dbg(TRACE, "Exit\n");
- return err;
-@@ -2103,6 +2113,7 @@ brcmf_cfg80211_set_tx_power(struct wiphy
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct net_device *ndev = cfg_to_ndev(cfg);
- struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct brcmf_pub *drvr = cfg->pub;
- s32 err;
- s32 disable;
- u32 qdbm = 127;
-@@ -2117,7 +2128,7 @@ brcmf_cfg80211_set_tx_power(struct wiphy
- case NL80211_TX_POWER_LIMITED:
- case NL80211_TX_POWER_FIXED:
- if (mbm < 0) {
-- bphy_err(wiphy, "TX_POWER_FIXED - dbm is negative\n");
-+ bphy_err(drvr, "TX_POWER_FIXED - dbm is negative\n");
- err = -EINVAL;
- goto done;
- }
-@@ -2127,7 +2138,7 @@ brcmf_cfg80211_set_tx_power(struct wiphy
- qdbm |= WL_TXPWR_OVERRIDE;
- break;
- default:
-- bphy_err(wiphy, "Unsupported type %d\n", type);
-+ bphy_err(drvr, "Unsupported type %d\n", type);
- err = -EINVAL;
- goto done;
- }
-@@ -2135,11 +2146,11 @@ brcmf_cfg80211_set_tx_power(struct wiphy
- disable = WL_RADIO_SW_DISABLE << 16;
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_RADIO, disable);
- if (err)
-- bphy_err(wiphy, "WLC_SET_RADIO error (%d)\n", err);
-+ bphy_err(drvr, "WLC_SET_RADIO error (%d)\n", err);
-
- err = brcmf_fil_iovar_int_set(ifp, "qtxpower", qdbm);
- if (err)
-- bphy_err(wiphy, "qtxpower error (%d)\n", err);
-+ bphy_err(drvr, "qtxpower error (%d)\n", err);
-
- done:
- brcmf_dbg(TRACE, "Exit %d (qdbm)\n", qdbm & ~WL_TXPWR_OVERRIDE);
-@@ -2150,7 +2161,9 @@ static s32
- brcmf_cfg80211_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
- s32 *dbm)
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_cfg80211_vif *vif = wdev_to_vif(wdev);
-+ struct brcmf_pub *drvr = cfg->pub;
- s32 qdbm = 0;
- s32 err;
-
-@@ -2160,7 +2173,7 @@ brcmf_cfg80211_get_tx_power(struct wiphy
-
- err = brcmf_fil_iovar_int_get(vif->ifp, "qtxpower", &qdbm);
- if (err) {
-- bphy_err(wiphy, "error (%d)\n", err);
-+ bphy_err(drvr, "error (%d)\n", err);
- goto done;
- }
- *dbm = (qdbm & ~WL_TXPWR_OVERRIDE) / 4;
-@@ -2175,6 +2188,7 @@ brcmf_cfg80211_config_default_key(struct
- u8 key_idx, bool unicast, bool multicast)
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct brcmf_pub *drvr = ifp->drvr;
- u32 index;
- u32 wsec;
- s32 err = 0;
-@@ -2186,7 +2200,7 @@ brcmf_cfg80211_config_default_key(struct
-
- err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
- if (err) {
-- bphy_err(wiphy, "WLC_GET_WSEC error (%d)\n", err);
-+ bphy_err(drvr, "WLC_GET_WSEC error (%d)\n", err);
- goto done;
- }
-
-@@ -2196,7 +2210,7 @@ brcmf_cfg80211_config_default_key(struct
- err = brcmf_fil_cmd_int_set(ifp,
- BRCMF_C_SET_KEY_PRIMARY, index);
- if (err)
-- bphy_err(wiphy, "error (%d)\n", err);
-+ bphy_err(drvr, "error (%d)\n", err);
- }
- done:
- brcmf_dbg(TRACE, "Exit\n");
-@@ -2245,7 +2259,9 @@ brcmf_cfg80211_add_key(struct wiphy *wip
- u8 key_idx, bool pairwise, const u8 *mac_addr,
- struct key_params *params)
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_wsec_key *key;
- s32 val;
- s32 wsec;
-@@ -2260,7 +2276,7 @@ brcmf_cfg80211_add_key(struct wiphy *wip
-
- if (key_idx >= BRCMF_MAX_DEFAULT_KEYS) {
- /* we ignore this key index in this case */
-- bphy_err(wiphy, "invalid key index (%d)\n", key_idx);
-+ bphy_err(drvr, "invalid key index (%d)\n", key_idx);
- return -EINVAL;
- }
-
-@@ -2269,7 +2285,7 @@ brcmf_cfg80211_add_key(struct wiphy *wip
- mac_addr);
-
- if (params->key_len > sizeof(key->data)) {
-- bphy_err(wiphy, "Too long key length (%u)\n", params->key_len);
-+ bphy_err(drvr, "Too long key length (%u)\n", params->key_len);
- return -EINVAL;
- }
-
-@@ -2323,7 +2339,7 @@ brcmf_cfg80211_add_key(struct wiphy *wip
- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_CCMP\n");
- break;
- default:
-- bphy_err(wiphy, "Invalid cipher (0x%x)\n", params->cipher);
-+ bphy_err(drvr, "Invalid cipher (0x%x)\n", params->cipher);
- err = -EINVAL;
- goto done;
- }
-@@ -2334,13 +2350,13 @@ brcmf_cfg80211_add_key(struct wiphy *wip
-
- err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
- if (err) {
-- bphy_err(wiphy, "get wsec error (%d)\n", err);
-+ bphy_err(drvr, "get wsec error (%d)\n", err);
- goto done;
- }
- wsec |= val;
- err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
- if (err) {
-- bphy_err(wiphy, "set wsec error (%d)\n", err);
-+ bphy_err(drvr, "set wsec error (%d)\n", err);
- goto done;
- }
-
-@@ -2355,9 +2371,11 @@ brcmf_cfg80211_get_key(struct wiphy *wip
- void (*callback)(void *cookie,
- struct key_params *params))
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct key_params params;
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_cfg80211_security *sec;
- s32 wsec;
- s32 err = 0;
-@@ -2371,7 +2389,7 @@ brcmf_cfg80211_get_key(struct wiphy *wip
-
- err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
- if (err) {
-- bphy_err(wiphy, "WLC_GET_WSEC error (%d)\n", err);
-+ bphy_err(drvr, "WLC_GET_WSEC error (%d)\n", err);
- /* Ignore this error, may happen during DISASSOC */
- err = -EAGAIN;
- goto done;
-@@ -2392,7 +2410,7 @@ brcmf_cfg80211_get_key(struct wiphy *wip
- params.cipher = WLAN_CIPHER_SUITE_AES_CMAC;
- brcmf_dbg(CONN, "WLAN_CIPHER_SUITE_AES_CMAC\n");
- } else {
-- bphy_err(wiphy, "Invalid algo (0x%x)\n", wsec);
-+ bphy_err(drvr, "Invalid algo (0x%x)\n", wsec);
- err = -EINVAL;
- goto done;
- }
-@@ -2422,7 +2440,7 @@ brcmf_cfg80211_config_default_mgmt_key(s
- static void
- brcmf_cfg80211_reconfigure_wep(struct brcmf_if *ifp)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- s32 err;
- u8 key_idx;
- struct brcmf_wsec_key *key;
-@@ -2439,18 +2457,18 @@ brcmf_cfg80211_reconfigure_wep(struct br
-
- err = send_key_to_dongle(ifp, key);
- if (err) {
-- bphy_err(wiphy, "Setting WEP key failed (%d)\n", err);
-+ bphy_err(drvr, "Setting WEP key failed (%d)\n", err);
- return;
- }
- err = brcmf_fil_bsscfg_int_get(ifp, "wsec", &wsec);
- if (err) {
-- bphy_err(wiphy, "get wsec error (%d)\n", err);
-+ bphy_err(drvr, "get wsec error (%d)\n", err);
- return;
- }
- wsec |= WEP_ENABLED;
- err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
- if (err)
-- bphy_err(wiphy, "set wsec error (%d)\n", err);
-+ bphy_err(drvr, "set wsec error (%d)\n", err);
- }
-
- static void brcmf_convert_sta_flags(u32 fw_sta_flags, struct station_info *si)
-@@ -2476,7 +2494,7 @@ static void brcmf_convert_sta_flags(u32
-
- static void brcmf_fill_bss_param(struct brcmf_if *ifp, struct station_info *si)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct {
- __le32 len;
- struct brcmf_bss_info_le bss_le;
-@@ -2492,7 +2510,7 @@ static void brcmf_fill_bss_param(struct
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, buf,
- WL_BSS_INFO_MAX);
- if (err) {
-- bphy_err(wiphy, "Failed to get bss info (%d)\n", err);
-+ bphy_err(drvr, "Failed to get bss info (%d)\n", err);
- goto out_kfree;
- }
- si->filled |= BIT_ULL(NL80211_STA_INFO_BSS_PARAM);
-@@ -2514,7 +2532,7 @@ static s32
- brcmf_cfg80211_get_station_ibss(struct brcmf_if *ifp,
- struct station_info *sinfo)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_scb_val_le scbval;
- struct brcmf_pktcnt_le pktcnt;
- s32 err;
-@@ -2524,7 +2542,7 @@ brcmf_cfg80211_get_station_ibss(struct b
- /* Get the current tx rate */
- err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate);
- if (err < 0) {
-- bphy_err(wiphy, "BRCMF_C_GET_RATE error (%d)\n", err);
-+ bphy_err(drvr, "BRCMF_C_GET_RATE error (%d)\n", err);
- return err;
- }
- sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
-@@ -2534,7 +2552,7 @@ brcmf_cfg80211_get_station_ibss(struct b
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI, &scbval,
- sizeof(scbval));
- if (err) {
-- bphy_err(wiphy, "BRCMF_C_GET_RSSI error (%d)\n", err);
-+ bphy_err(drvr, "BRCMF_C_GET_RSSI error (%d)\n", err);
- return err;
- }
- rssi = le32_to_cpu(scbval.val);
-@@ -2544,7 +2562,7 @@ brcmf_cfg80211_get_station_ibss(struct b
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_GET_PKTCNTS, &pktcnt,
- sizeof(pktcnt));
- if (err) {
-- bphy_err(wiphy, "BRCMF_C_GET_GET_PKTCNTS error (%d)\n", err);
-+ bphy_err(drvr, "BRCMF_C_GET_GET_PKTCNTS error (%d)\n", err);
- return err;
- }
- sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_PACKETS) |
-@@ -2563,7 +2581,9 @@ static s32
- brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
- const u8 *mac, struct station_info *sinfo)
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_scb_val_le scb_val;
- s32 err = 0;
- struct brcmf_sta_info_le sta_info_le;
-@@ -2592,7 +2612,7 @@ brcmf_cfg80211_get_station(struct wiphy
- &sta_info_le,
- sizeof(sta_info_le));
- if (err < 0) {
-- bphy_err(wiphy, "GET STA INFO failed, %d\n", err);
-+ bphy_err(drvr, "GET STA INFO failed, %d\n", err);
- goto done;
- }
- }
-@@ -2661,7 +2681,7 @@ brcmf_cfg80211_get_station(struct wiphy
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI,
- &scb_val, sizeof(scb_val));
- if (err) {
-- bphy_err(wiphy, "Could not get rssi (%d)\n",
-+ bphy_err(drvr, "Could not get rssi (%d)\n",
- err);
- goto done;
- } else {
-@@ -2683,6 +2703,7 @@ brcmf_cfg80211_dump_station(struct wiphy
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct brcmf_pub *drvr = cfg->pub;
- s32 err;
-
- brcmf_dbg(TRACE, "Enter, idx %d\n", idx);
-@@ -2693,7 +2714,7 @@ brcmf_cfg80211_dump_station(struct wiphy
- &cfg->assoclist,
- sizeof(cfg->assoclist));
- if (err) {
-- bphy_err(wiphy, "BRCMF_C_GET_ASSOCLIST unsupported, err=%d\n",
-+ bphy_err(drvr, "BRCMF_C_GET_ASSOCLIST unsupported, err=%d\n",
- err);
- cfg->assoclist.count = 0;
- return -EOPNOTSUPP;
-@@ -2714,6 +2735,7 @@ brcmf_cfg80211_set_power_mgmt(struct wip
- s32 err = 0;
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct brcmf_pub *drvr = cfg->pub;
-
- brcmf_dbg(TRACE, "Enter\n");
-
-@@ -2742,9 +2764,9 @@ brcmf_cfg80211_set_power_mgmt(struct wip
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm);
- if (err) {
- if (err == -ENODEV)
-- bphy_err(wiphy, "net_device is not ready yet\n");
-+ bphy_err(drvr, "net_device is not ready yet\n");
- else
-- bphy_err(wiphy, "error (%d)\n", err);
-+ bphy_err(drvr, "error (%d)\n", err);
- }
- done:
- brcmf_dbg(TRACE, "Exit\n");
-@@ -2755,6 +2777,7 @@ static s32 brcmf_inform_single_bss(struc
- struct brcmf_bss_info_le *bi)
- {
- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct cfg80211_bss *bss;
- enum nl80211_band band;
- struct brcmu_chan ch;
-@@ -2767,7 +2790,7 @@ static s32 brcmf_inform_single_bss(struc
- struct cfg80211_inform_bss bss_data = {};
-
- if (le32_to_cpu(bi->length) > WL_BSS_INFO_MAX) {
-- bphy_err(wiphy, "Bss info is larger than buffer. Discarding\n");
-+ bphy_err(drvr, "Bss info is larger than buffer. Discarding\n");
- return 0;
- }
-
-@@ -2826,7 +2849,7 @@ next_bss_le(struct brcmf_scan_results *l
-
- static s32 brcmf_inform_bss(struct brcmf_cfg80211_info *cfg)
- {
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_scan_results *bss_list;
- struct brcmf_bss_info_le *bi = NULL; /* must be initialized */
- s32 err = 0;
-@@ -2835,7 +2858,7 @@ static s32 brcmf_inform_bss(struct brcmf
- bss_list = (struct brcmf_scan_results *)cfg->escan_info.escan_buf;
- if (bss_list->count != 0 &&
- bss_list->version != BRCMF_BSS_INFO_VERSION) {
-- bphy_err(wiphy, "Version %d != WL_BSS_INFO_VERSION\n",
-+ bphy_err(drvr, "Version %d != WL_BSS_INFO_VERSION\n",
- bss_list->version);
- return -EOPNOTSUPP;
- }
-@@ -2853,6 +2876,7 @@ static s32 brcmf_inform_ibss(struct brcm
- struct net_device *ndev, const u8 *bssid)
- {
- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct ieee80211_channel *notify_channel;
- struct brcmf_bss_info_le *bi = NULL;
- struct ieee80211_supported_band *band;
-@@ -2880,7 +2904,7 @@ static s32 brcmf_inform_ibss(struct brcm
- err = brcmf_fil_cmd_data_get(netdev_priv(ndev), BRCMF_C_GET_BSS_INFO,
- buf, WL_BSS_INFO_MAX);
- if (err) {
-- bphy_err(wiphy, "WLC_GET_BSS_INFO failed: %d\n", err);
-+ bphy_err(drvr, "WLC_GET_BSS_INFO failed: %d\n", err);
- goto CleanUp;
- }
-
-@@ -2934,7 +2958,7 @@ CleanUp:
- static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg,
- struct brcmf_if *ifp)
- {
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_bss_info_le *bi;
- const struct brcmf_tlv *tim;
- u16 beacon_interval;
-@@ -2951,7 +2975,7 @@ static s32 brcmf_update_bss_info(struct
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO,
- cfg->extra_buf, WL_EXTRA_BUF_MAX);
- if (err) {
-- bphy_err(wiphy, "Could not get bss info %d\n", err);
-+ bphy_err(drvr, "Could not get bss info %d\n", err);
- goto update_bss_info_out;
- }
-
-@@ -2976,7 +3000,7 @@ static s32 brcmf_update_bss_info(struct
- u32 var;
- err = brcmf_fil_iovar_int_get(ifp, "dtim_assoc", &var);
- if (err) {
-- bphy_err(wiphy, "wl dtim_assoc failed (%d)\n", err);
-+ bphy_err(drvr, "wl dtim_assoc failed (%d)\n", err);
- goto update_bss_info_out;
- }
- dtim_period = (u8)var;
-@@ -3014,10 +3038,10 @@ static void brcmf_escan_timeout(struct t
- {
- struct brcmf_cfg80211_info *cfg =
- from_timer(cfg, t, escan_timeout);
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
-
- if (cfg->int_escan_map || cfg->scan_request) {
-- bphy_err(wiphy, "timer expired\n");
-+ bphy_err(drvr, "timer expired\n");
- schedule_work(&cfg->escan_timeout_work);
- }
- }
-@@ -3065,8 +3089,8 @@ static s32
- brcmf_cfg80211_escan_handler(struct brcmf_if *ifp,
- const struct brcmf_event_msg *e, void *data)
- {
-- struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = ifp->drvr;
-+ struct brcmf_cfg80211_info *cfg = drvr->config;
- s32 status;
- struct brcmf_escan_result_le *escan_result_le;
- u32 escan_buflen;
-@@ -3083,7 +3107,7 @@ brcmf_cfg80211_escan_handler(struct brcm
- goto exit;
-
- if (!test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
-- bphy_err(wiphy, "scan not ready, bsscfgidx=%d\n",
-+ bphy_err(drvr, "scan not ready, bsscfgidx=%d\n",
- ifp->bsscfgidx);
- return -EPERM;
- }
-@@ -3091,24 +3115,24 @@ brcmf_cfg80211_escan_handler(struct brcm
- if (status == BRCMF_E_STATUS_PARTIAL) {
- brcmf_dbg(SCAN, "ESCAN Partial result\n");
- if (e->datalen < sizeof(*escan_result_le)) {
-- bphy_err(wiphy, "invalid event data length\n");
-+ bphy_err(drvr, "invalid event data length\n");
- goto exit;
- }
- escan_result_le = (struct brcmf_escan_result_le *) data;
- if (!escan_result_le) {
-- bphy_err(wiphy, "Invalid escan result (NULL pointer)\n");
-+ bphy_err(drvr, "Invalid escan result (NULL pointer)\n");
- goto exit;
- }
- escan_buflen = le32_to_cpu(escan_result_le->buflen);
- if (escan_buflen > BRCMF_ESCAN_BUF_SIZE ||
- escan_buflen > e->datalen ||
- escan_buflen < sizeof(*escan_result_le)) {
-- bphy_err(wiphy, "Invalid escan buffer length: %d\n",
-+ bphy_err(drvr, "Invalid escan buffer length: %d\n",
- escan_buflen);
- goto exit;
- }
- if (le16_to_cpu(escan_result_le->bss_count) != 1) {
-- bphy_err(wiphy, "Invalid bss_count %d: ignoring\n",
-+ bphy_err(drvr, "Invalid bss_count %d: ignoring\n",
- escan_result_le->bss_count);
- goto exit;
- }
-@@ -3124,7 +3148,7 @@ brcmf_cfg80211_escan_handler(struct brcm
-
- bi_length = le32_to_cpu(bss_info_le->length);
- if (bi_length != escan_buflen - WL_ESCAN_RESULTS_FIXED_SIZE) {
-- bphy_err(wiphy, "Ignoring invalid bss_info length: %d\n",
-+ bphy_err(drvr, "Ignoring invalid bss_info length: %d\n",
- bi_length);
- goto exit;
- }
-@@ -3133,7 +3157,7 @@ brcmf_cfg80211_escan_handler(struct brcm
- BIT(NL80211_IFTYPE_ADHOC))) {
- if (le16_to_cpu(bss_info_le->capability) &
- WLAN_CAPABILITY_IBSS) {
-- bphy_err(wiphy, "Ignoring IBSS result\n");
-+ bphy_err(drvr, "Ignoring IBSS result\n");
- goto exit;
- }
- }
-@@ -3141,7 +3165,7 @@ brcmf_cfg80211_escan_handler(struct brcm
- list = (struct brcmf_scan_results *)
- cfg->escan_info.escan_buf;
- if (bi_length > BRCMF_ESCAN_BUF_SIZE - list->buflen) {
-- bphy_err(wiphy, "Buffer is too small: ignoring\n");
-+ bphy_err(drvr, "Buffer is too small: ignoring\n");
- goto exit;
- }
-
-@@ -3300,7 +3324,8 @@ static s32
- brcmf_notify_sched_scan_results(struct brcmf_if *ifp,
- const struct brcmf_event_msg *e, void *data)
- {
-- struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
-+ struct brcmf_pub *drvr = ifp->drvr;
-+ struct brcmf_cfg80211_info *cfg = drvr->config;
- struct brcmf_pno_net_info_le *netinfo, *netinfo_start;
- struct cfg80211_scan_request *request = NULL;
- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-@@ -3333,14 +3358,14 @@ brcmf_notify_sched_scan_results(struct b
- WARN_ON(status != BRCMF_PNO_SCAN_COMPLETE);
- brcmf_dbg(SCAN, "PFN NET FOUND event. count: %d\n", result_count);
- if (!result_count) {
-- bphy_err(wiphy, "FALSE PNO Event. (pfn_count == 0)\n");
-+ bphy_err(drvr, "FALSE PNO Event. (pfn_count == 0)\n");
- goto out_err;
- }
-
- netinfo_start = brcmf_get_netinfo_array(pfn_result);
- datalen = e->datalen - ((void *)netinfo_start - (void *)pfn_result);
- if (datalen < result_count * sizeof(*netinfo)) {
-- bphy_err(wiphy, "insufficient event data\n");
-+ bphy_err(drvr, "insufficient event data\n");
- goto out_err;
- }
-
-@@ -3387,14 +3412,15 @@ brcmf_cfg80211_sched_scan_start(struct w
- struct net_device *ndev,
- struct cfg80211_sched_scan_request *req)
- {
-- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct brcmf_pub *drvr = cfg->pub;
-
- brcmf_dbg(SCAN, "Enter: n_match_sets=%d n_ssids=%d\n",
- req->n_match_sets, req->n_ssids);
-
- if (test_bit(BRCMF_SCAN_STATUS_SUPPRESS, &cfg->scan_status)) {
-- bphy_err(wiphy, "Scanning suppressed: status=%lu\n",
-+ bphy_err(drvr, "Scanning suppressed: status=%lu\n",
- cfg->scan_status);
- return -EAGAIN;
- }
-@@ -3473,8 +3499,8 @@ static s32
- brcmf_wowl_nd_results(struct brcmf_if *ifp, const struct brcmf_event_msg *e,
- void *data)
- {
-- struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = ifp->drvr;
-+ struct brcmf_cfg80211_info *cfg = drvr->config;
- struct brcmf_pno_scanresults_le *pfn_result;
- struct brcmf_pno_net_info_le *netinfo;
-
-@@ -3493,7 +3519,7 @@ brcmf_wowl_nd_results(struct brcmf_if *i
- }
-
- if (le32_to_cpu(pfn_result->count) < 1) {
-- bphy_err(wiphy, "Invalid result count, expected 1 (%d)\n",
-+ bphy_err(drvr, "Invalid result count, expected 1 (%d)\n",
- le32_to_cpu(pfn_result->count));
- return -EINVAL;
- }
-@@ -3523,6 +3549,7 @@ brcmf_wowl_nd_results(struct brcmf_if *i
- static void brcmf_report_wowl_wakeind(struct wiphy *wiphy, struct brcmf_if *ifp)
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_wowl_wakeind_le wake_ind_le;
- struct cfg80211_wowlan_wakeup wakeup_data;
- struct cfg80211_wowlan_wakeup *wakeup;
-@@ -3533,7 +3560,7 @@ static void brcmf_report_wowl_wakeind(st
- err = brcmf_fil_iovar_data_get(ifp, "wowl_wakeind", &wake_ind_le,
- sizeof(wake_ind_le));
- if (err) {
-- bphy_err(wiphy, "Get wowl_wakeind failed, err = %d\n", err);
-+ bphy_err(drvr, "Get wowl_wakeind failed, err = %d\n", err);
- return;
- }
-
-@@ -3574,7 +3601,7 @@ static void brcmf_report_wowl_wakeind(st
- cfg->wowl.nd_data_completed,
- BRCMF_ND_INFO_TIMEOUT);
- if (!timeout)
-- bphy_err(wiphy, "No result for wowl net detect\n");
-+ bphy_err(drvr, "No result for wowl net detect\n");
- else
- wakeup_data.net_detect = cfg->wowl.nd_info;
- }
-@@ -3763,6 +3790,7 @@ brcmf_cfg80211_set_pmksa(struct wiphy *w
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_pmksa *pmk = &cfg->pmk_list.pmk[0];
-+ struct brcmf_pub *drvr = cfg->pub;
- s32 err;
- u32 npmk, i;
-
-@@ -3782,7 +3810,7 @@ brcmf_cfg80211_set_pmksa(struct wiphy *w
- cfg->pmk_list.npmk = cpu_to_le32(npmk);
- }
- } else {
-- bphy_err(wiphy, "Too many PMKSA entries cached %d\n", npmk);
-+ bphy_err(drvr, "Too many PMKSA entries cached %d\n", npmk);
- return -EINVAL;
- }
-
-@@ -3805,6 +3833,7 @@ brcmf_cfg80211_del_pmksa(struct wiphy *w
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_pmksa *pmk = &cfg->pmk_list.pmk[0];
-+ struct brcmf_pub *drvr = cfg->pub;
- s32 err;
- u32 npmk, i;
-
-@@ -3828,7 +3857,7 @@ brcmf_cfg80211_del_pmksa(struct wiphy *w
- memset(&pmk[i], 0, sizeof(*pmk));
- cfg->pmk_list.npmk = cpu_to_le32(npmk - 1);
- } else {
-- bphy_err(wiphy, "Cache entry not found\n");
-+ bphy_err(drvr, "Cache entry not found\n");
- return -EINVAL;
- }
-
-@@ -3860,20 +3889,20 @@ brcmf_cfg80211_flush_pmksa(struct wiphy
-
- static s32 brcmf_configure_opensecurity(struct brcmf_if *ifp)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- s32 err;
- s32 wpa_val;
-
- /* set auth */
- err = brcmf_fil_bsscfg_int_set(ifp, "auth", 0);
- if (err < 0) {
-- bphy_err(wiphy, "auth error %d\n", err);
-+ bphy_err(drvr, "auth error %d\n", err);
- return err;
- }
- /* set wsec */
- err = brcmf_fil_bsscfg_int_set(ifp, "wsec", 0);
- if (err < 0) {
-- bphy_err(wiphy, "wsec error %d\n", err);
-+ bphy_err(drvr, "wsec error %d\n", err);
- return err;
- }
- /* set upper-layer auth */
-@@ -3883,7 +3912,7 @@ static s32 brcmf_configure_opensecurity(
- wpa_val = WPA_AUTH_DISABLED;
- err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_val);
- if (err < 0) {
-- bphy_err(wiphy, "wpa_auth error %d\n", err);
-+ bphy_err(drvr, "wpa_auth error %d\n", err);
- return err;
- }
-
-@@ -3903,7 +3932,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- const struct brcmf_vs_tlv *wpa_ie,
- bool is_rsn_ie)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- u32 auth = 0; /* d11 open authentication */
- u16 count;
- s32 err = 0;
-@@ -3934,13 +3963,13 @@ brcmf_configure_wpaie(struct brcmf_if *i
- /* check for multicast cipher suite */
- if (offset + WPA_IE_MIN_OUI_LEN > len) {
- err = -EINVAL;
-- bphy_err(wiphy, "no multicast cipher suite\n");
-+ bphy_err(drvr, "no multicast cipher suite\n");
- goto exit;
- }
-
- if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) {
- err = -EINVAL;
-- bphy_err(wiphy, "ivalid OUI\n");
-+ bphy_err(drvr, "ivalid OUI\n");
- goto exit;
- }
- offset += TLV_OUI_LEN;
-@@ -3962,7 +3991,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- break;
- default:
- err = -EINVAL;
-- bphy_err(wiphy, "Invalid multi cast cipher info\n");
-+ bphy_err(drvr, "Invalid multi cast cipher info\n");
- goto exit;
- }
-
-@@ -3973,13 +4002,13 @@ brcmf_configure_wpaie(struct brcmf_if *i
- /* Check for unicast suite(s) */
- if (offset + (WPA_IE_MIN_OUI_LEN * count) > len) {
- err = -EINVAL;
-- bphy_err(wiphy, "no unicast cipher suite\n");
-+ bphy_err(drvr, "no unicast cipher suite\n");
- goto exit;
- }
- for (i = 0; i < count; i++) {
- if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) {
- err = -EINVAL;
-- bphy_err(wiphy, "ivalid OUI\n");
-+ bphy_err(drvr, "ivalid OUI\n");
- goto exit;
- }
- offset += TLV_OUI_LEN;
-@@ -3997,7 +4026,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- pval |= AES_ENABLED;
- break;
- default:
-- bphy_err(wiphy, "Invalid unicast security info\n");
-+ bphy_err(drvr, "Invalid unicast security info\n");
- }
- offset++;
- }
-@@ -4007,13 +4036,13 @@ brcmf_configure_wpaie(struct brcmf_if *i
- /* Check for auth key management suite(s) */
- if (offset + (WPA_IE_MIN_OUI_LEN * count) > len) {
- err = -EINVAL;
-- bphy_err(wiphy, "no auth key mgmt suite\n");
-+ bphy_err(drvr, "no auth key mgmt suite\n");
- goto exit;
- }
- for (i = 0; i < count; i++) {
- if (!brcmf_valid_wpa_oui(&data[offset], is_rsn_ie)) {
- err = -EINVAL;
-- bphy_err(wiphy, "ivalid OUI\n");
-+ bphy_err(drvr, "ivalid OUI\n");
- goto exit;
- }
- offset += TLV_OUI_LEN;
-@@ -4041,7 +4070,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- wpa_auth |= WPA2_AUTH_1X_SHA256;
- break;
- default:
-- bphy_err(wiphy, "Invalid key mgmt info\n");
-+ bphy_err(drvr, "Invalid key mgmt info\n");
- }
- offset++;
- }
-@@ -4083,7 +4112,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- err = brcmf_fil_bsscfg_int_set(ifp, "wme_bss_disable",
- wme_bss_disable);
- if (err < 0) {
-- bphy_err(wiphy, "wme_bss_disable error %d\n", err);
-+ bphy_err(drvr, "wme_bss_disable error %d\n", err);
- goto exit;
- }
-
-@@ -4097,7 +4126,7 @@ brcmf_configure_wpaie(struct brcmf_if *i
- &data[offset],
- WPA_IE_MIN_OUI_LEN);
- if (err < 0) {
-- bphy_err(wiphy, "bip error %d\n", err);
-+ bphy_err(drvr, "bip error %d\n", err);
- goto exit;
- }
- }
-@@ -4108,13 +4137,13 @@ brcmf_configure_wpaie(struct brcmf_if *i
- /* set auth */
- err = brcmf_fil_bsscfg_int_set(ifp, "auth", auth);
- if (err < 0) {
-- bphy_err(wiphy, "auth error %d\n", err);
-+ bphy_err(drvr, "auth error %d\n", err);
- goto exit;
- }
- /* set wsec */
- err = brcmf_fil_bsscfg_int_set(ifp, "wsec", wsec);
- if (err < 0) {
-- bphy_err(wiphy, "wsec error %d\n", err);
-+ bphy_err(drvr, "wsec error %d\n", err);
- goto exit;
- }
- /* Configure MFP, this needs to go after wsec otherwise the wsec command
-@@ -4123,14 +4152,14 @@ brcmf_configure_wpaie(struct brcmf_if *i
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MFP)) {
- err = brcmf_fil_bsscfg_int_set(ifp, "mfp", mfp);
- if (err < 0) {
-- bphy_err(wiphy, "mfp error %d\n", err);
-+ bphy_err(drvr, "mfp error %d\n", err);
- goto exit;
- }
- }
- /* set upper-layer auth */
- err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_auth);
- if (err < 0) {
-- bphy_err(wiphy, "wpa_auth error %d\n", err);
-+ bphy_err(drvr, "wpa_auth error %d\n", err);
- goto exit;
- }
-
-@@ -4216,8 +4245,8 @@ brcmf_vndr_ie(u8 *iebuf, s32 pktflag, u8
- s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag,
- const u8 *vndr_ie_buf, u32 vndr_ie_len)
- {
-+ struct brcmf_pub *drvr;
- struct brcmf_if *ifp;
-- struct wiphy *wiphy;
- struct vif_saved_ie *saved_ie;
- s32 err = 0;
- u8 *iovar_ie_buf;
-@@ -4238,7 +4267,7 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c
- if (!vif)
- return -ENODEV;
- ifp = vif->ifp;
-- wiphy = ifp->drvr->wiphy;
-+ drvr = ifp->drvr;
- saved_ie = &vif->saved_ie;
-
- brcmf_dbg(TRACE, "bsscfgidx %d, pktflag : 0x%02X\n", ifp->bsscfgidx,
-@@ -4270,13 +4299,13 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c
- break;
- default:
- err = -EPERM;
-- bphy_err(wiphy, "not suitable type\n");
-+ bphy_err(drvr, "not suitable type\n");
- goto exit;
- }
-
- if (vndr_ie_len > mgmt_ie_buf_len) {
- err = -ENOMEM;
-- bphy_err(wiphy, "extra IE size too big\n");
-+ bphy_err(drvr, "extra IE size too big\n");
- goto exit;
- }
-
-@@ -4337,7 +4366,7 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c
- /* verify remained buf size before copy data */
- if (remained_buf_len < (vndrie_info->vndrie.len +
- VNDR_IE_VSIE_OFFSET)) {
-- bphy_err(wiphy, "no space in mgmt_ie_buf: len left %d",
-+ bphy_err(drvr, "no space in mgmt_ie_buf: len left %d",
- remained_buf_len);
- break;
- }
-@@ -4369,7 +4398,7 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c
- err = brcmf_fil_bsscfg_data_set(ifp, "vndr_ie", iovar_ie_buf,
- total_ie_buf_len);
- if (err)
-- bphy_err(wiphy, "vndr ie set error : %d\n", err);
-+ bphy_err(drvr, "vndr ie set error : %d\n", err);
- }
-
- exit:
-@@ -4397,14 +4426,14 @@ static s32
- brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif,
- struct cfg80211_beacon_data *beacon)
- {
-- struct wiphy *wiphy = vif->ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = vif->ifp->drvr;
- s32 err;
-
- /* Set Beacon IEs to FW */
- err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_BEACON_FLAG,
- beacon->tail, beacon->tail_len);
- if (err) {
-- bphy_err(wiphy, "Set Beacon IE Failed\n");
-+ bphy_err(drvr, "Set Beacon IE Failed\n");
- return err;
- }
- brcmf_dbg(TRACE, "Applied Vndr IEs for Beacon\n");
-@@ -4414,7 +4443,7 @@ brcmf_config_ap_mgmt_ie(struct brcmf_cfg
- beacon->proberesp_ies,
- beacon->proberesp_ies_len);
- if (err)
-- bphy_err(wiphy, "Set Probe Resp IE Failed\n");
-+ bphy_err(drvr, "Set Probe Resp IE Failed\n");
- else
- brcmf_dbg(TRACE, "Applied Vndr IEs for Probe Resp\n");
-
-@@ -4428,6 +4457,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- s32 ie_offset;
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct brcmf_pub *drvr = cfg->pub;
- const struct brcmf_tlv *ssid_ie;
- const struct brcmf_tlv *country_ie;
- struct brcmf_ssid_le ssid_le;
-@@ -4523,7 +4553,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY,
- is_11d);
- if (err < 0) {
-- bphy_err(wiphy, "Regulatory Set Error, %d\n",
-+ bphy_err(drvr, "Regulatory Set Error, %d\n",
- err);
- goto exit;
- }
-@@ -4532,7 +4562,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD,
- settings->beacon_interval);
- if (err < 0) {
-- bphy_err(wiphy, "Beacon Interval Set Error, %d\n",
-+ bphy_err(drvr, "Beacon Interval Set Error, %d\n",
- err);
- goto exit;
- }
-@@ -4541,7 +4571,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_DTIMPRD,
- settings->dtim_period);
- if (err < 0) {
-- bphy_err(wiphy, "DTIM Interval Set Error, %d\n",
-+ bphy_err(drvr, "DTIM Interval Set Error, %d\n",
- err);
- goto exit;
- }
-@@ -4552,7 +4582,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- !brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB))) {
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1);
- if (err < 0) {
-- bphy_err(wiphy, "BRCMF_C_DOWN error %d\n",
-+ bphy_err(drvr, "BRCMF_C_DOWN error %d\n",
- err);
- goto exit;
- }
-@@ -4561,7 +4591,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 1);
- if (err < 0) {
-- bphy_err(wiphy, "SET INFRA error %d\n", err);
-+ bphy_err(drvr, "SET INFRA error %d\n", err);
- goto exit;
- }
- } else if (WARN_ON(supports_11d && (is_11d != ifp->vif->is_11d))) {
-@@ -4577,7 +4607,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 1);
- if (err < 0) {
-- bphy_err(wiphy, "setting AP mode failed %d\n",
-+ bphy_err(drvr, "setting AP mode failed %d\n",
- err);
- goto exit;
- }
-@@ -4587,14 +4617,14 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- */
- err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
- if (err < 0) {
-- bphy_err(wiphy, "Set Channel failed: chspec=%d, %d\n",
-+ bphy_err(drvr, "Set Channel failed: chspec=%d, %d\n",
- chanspec, err);
- goto exit;
- }
- }
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1);
- if (err < 0) {
-- bphy_err(wiphy, "BRCMF_C_UP error (%d)\n", err);
-+ bphy_err(drvr, "BRCMF_C_UP error (%d)\n", err);
- goto exit;
- }
- /* On DOWN the firmware removes the WEP keys, reconfigure
-@@ -4609,14 +4639,14 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
- &join_params, sizeof(join_params));
- if (err < 0) {
-- bphy_err(wiphy, "SET SSID error (%d)\n", err);
-+ bphy_err(drvr, "SET SSID error (%d)\n", err);
- goto exit;
- }
-
- if (settings->hidden_ssid) {
- err = brcmf_fil_iovar_int_set(ifp, "closednet", 1);
- if (err) {
-- bphy_err(wiphy, "closednet error (%d)\n", err);
-+ bphy_err(drvr, "closednet error (%d)\n", err);
- goto exit;
- }
- }
-@@ -4625,14 +4655,14 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- } else if (dev_role == NL80211_IFTYPE_P2P_GO) {
- err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec);
- if (err < 0) {
-- bphy_err(wiphy, "Set Channel failed: chspec=%d, %d\n",
-+ bphy_err(drvr, "Set Channel failed: chspec=%d, %d\n",
- chanspec, err);
- goto exit;
- }
- err = brcmf_fil_bsscfg_data_set(ifp, "ssid", &ssid_le,
- sizeof(ssid_le));
- if (err < 0) {
-- bphy_err(wiphy, "setting ssid failed %d\n", err);
-+ bphy_err(drvr, "setting ssid failed %d\n", err);
- goto exit;
- }
- bss_enable.bsscfgidx = cpu_to_le32(ifp->bsscfgidx);
-@@ -4640,7 +4670,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi
- err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable,
- sizeof(bss_enable));
- if (err < 0) {
-- bphy_err(wiphy, "bss_enable config failed %d\n", err);
-+ bphy_err(drvr, "bss_enable config failed %d\n", err);
- goto exit;
- }
-
-@@ -4663,7 +4693,9 @@ exit:
-
- static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(ndev);
-+ struct brcmf_pub *drvr = cfg->pub;
- s32 err;
- struct brcmf_fil_bss_enable_le bss_enable;
- struct brcmf_join_params join_params;
-@@ -4688,13 +4720,13 @@ static int brcmf_cfg80211_stop_ap(struct
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID,
- &join_params, sizeof(join_params));
- if (err < 0)
-- bphy_err(wiphy, "SET SSID error (%d)\n", err);
-+ bphy_err(drvr, "SET SSID error (%d)\n", err);
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1);
- if (err < 0)
-- bphy_err(wiphy, "BRCMF_C_DOWN error %d\n", err);
-+ bphy_err(drvr, "BRCMF_C_DOWN error %d\n", err);
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 0);
- if (err < 0)
-- bphy_err(wiphy, "setting AP mode failed %d\n", err);
-+ bphy_err(drvr, "setting AP mode failed %d\n", err);
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS))
- brcmf_fil_iovar_int_set(ifp, "mbss", 0);
- brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_REGULATORY,
-@@ -4702,7 +4734,7 @@ static int brcmf_cfg80211_stop_ap(struct
- /* Bring device back up so it can be used again */
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1);
- if (err < 0)
-- bphy_err(wiphy, "BRCMF_C_UP error %d\n", err);
-+ bphy_err(drvr, "BRCMF_C_UP error %d\n", err);
-
- brcmf_vif_clear_mgmt_ies(ifp->vif);
- } else {
-@@ -4711,7 +4743,7 @@ static int brcmf_cfg80211_stop_ap(struct
- err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable,
- sizeof(bss_enable));
- if (err < 0)
-- bphy_err(wiphy, "bss_enable config failed %d\n", err);
-+ bphy_err(drvr, "bss_enable config failed %d\n", err);
- }
- brcmf_set_mpc(ifp, 1);
- brcmf_configure_arp_nd_offload(ifp, true);
-@@ -4740,6 +4772,7 @@ brcmf_cfg80211_del_station(struct wiphy
- struct station_del_parameters *params)
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_scb_val_le scbval;
- struct brcmf_if *ifp = netdev_priv(ndev);
- s32 err;
-@@ -4759,7 +4792,7 @@ brcmf_cfg80211_del_station(struct wiphy
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON,
- &scbval, sizeof(scbval));
- if (err)
-- bphy_err(wiphy, "SCB_DEAUTHENTICATE_FOR_REASON failed %d\n",
-+ bphy_err(drvr, "SCB_DEAUTHENTICATE_FOR_REASON failed %d\n",
- err);
-
- brcmf_dbg(TRACE, "Exit\n");
-@@ -4770,6 +4803,8 @@ static int
- brcmf_cfg80211_change_station(struct wiphy *wiphy, struct net_device *ndev,
- const u8 *mac, struct station_parameters *params)
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_if *ifp = netdev_priv(ndev);
- s32 err;
-
-@@ -4790,7 +4825,7 @@ brcmf_cfg80211_change_station(struct wip
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SCB_DEAUTHORIZE,
- (void *)mac, ETH_ALEN);
- if (err < 0)
-- bphy_err(wiphy, "Setting SCB (de-)authorize failed, %d\n", err);
-+ bphy_err(drvr, "Setting SCB (de-)authorize failed, %d\n", err);
-
- return err;
- }
-@@ -4820,6 +4855,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wip
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct ieee80211_channel *chan = params->chan;
-+ struct brcmf_pub *drvr = cfg->pub;
- const u8 *buf = params->buf;
- size_t len = params->len;
- const struct ieee80211_mgmt *mgmt;
-@@ -4840,7 +4876,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wip
- mgmt = (const struct ieee80211_mgmt *)buf;
-
- if (!ieee80211_is_mgmt(mgmt->frame_control)) {
-- bphy_err(wiphy, "Driver only allows MGMT packet type\n");
-+ bphy_err(drvr, "Driver only allows MGMT packet type\n");
- return -EPERM;
- }
-
-@@ -4871,13 +4907,13 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wip
- GFP_KERNEL);
- } else if (ieee80211_is_action(mgmt->frame_control)) {
- if (len > BRCMF_FIL_ACTION_FRAME_SIZE + DOT11_MGMT_HDR_LEN) {
-- bphy_err(wiphy, "invalid action frame length\n");
-+ bphy_err(drvr, "invalid action frame length\n");
- err = -EINVAL;
- goto exit;
- }
- af_params = kzalloc(sizeof(*af_params), GFP_KERNEL);
- if (af_params == NULL) {
-- bphy_err(wiphy, "unable to allocate frame\n");
-+ bphy_err(drvr, "unable to allocate frame\n");
- err = -ENOMEM;
- goto exit;
- }
-@@ -4928,6 +4964,7 @@ brcmf_cfg80211_cancel_remain_on_channel(
- u64 cookie)
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_cfg80211_vif *vif;
- int err = 0;
-
-@@ -4935,7 +4972,7 @@ brcmf_cfg80211_cancel_remain_on_channel(
-
- vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
- if (vif == NULL) {
-- bphy_err(wiphy, "No p2p device available for probe response\n");
-+ bphy_err(drvr, "No p2p device available for probe response\n");
- err = -ENODEV;
- goto exit;
- }
-@@ -4950,6 +4987,7 @@ static int brcmf_cfg80211_get_channel(st
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct net_device *ndev = wdev->netdev;
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_if *ifp;
- struct brcmu_chan ch;
- enum nl80211_band band = 0;
-@@ -4963,7 +5001,7 @@ static int brcmf_cfg80211_get_channel(st
-
- err = brcmf_fil_iovar_int_get(ifp, "chanspec", &chanspec);
- if (err) {
-- bphy_err(wiphy, "chanspec failed (%d)\n", err);
-+ bphy_err(drvr, "chanspec failed (%d)\n", err);
- return err;
- }
-
-@@ -5085,6 +5123,8 @@ static int brcmf_cfg80211_tdls_oper(stru
- struct net_device *ndev, const u8 *peer,
- enum nl80211_tdls_operation oper)
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_if *ifp;
- struct brcmf_tdls_iovar_le info;
- int ret = 0;
-@@ -5102,7 +5142,7 @@ static int brcmf_cfg80211_tdls_oper(stru
- ret = brcmf_fil_iovar_data_set(ifp, "tdls_endpoint",
- &info, sizeof(info));
- if (ret < 0)
-- bphy_err(wiphy, "tdls_endpoint iovar failed: ret=%d\n", ret);
-+ bphy_err(drvr, "tdls_endpoint iovar failed: ret=%d\n", ret);
-
- return ret;
- }
-@@ -5113,6 +5153,8 @@ brcmf_cfg80211_update_conn_params(struct
- struct cfg80211_connect_params *sme,
- u32 changed)
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_if *ifp;
- int err;
-
-@@ -5123,7 +5165,7 @@ brcmf_cfg80211_update_conn_params(struct
- err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG,
- sme->ie, sme->ie_len);
- if (err)
-- bphy_err(wiphy, "Set Assoc REQ IE Failed\n");
-+ bphy_err(drvr, "Set Assoc REQ IE Failed\n");
- else
- brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n");
-
-@@ -5135,6 +5177,8 @@ static int
- brcmf_cfg80211_set_rekey_data(struct wiphy *wiphy, struct net_device *ndev,
- struct cfg80211_gtk_rekey_data *gtk)
- {
-+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcmf_gtk_keyinfo_le gtk_le;
- int ret;
-@@ -5149,7 +5193,7 @@ brcmf_cfg80211_set_rekey_data(struct wip
- ret = brcmf_fil_iovar_data_set(ifp, "gtk_key_info", &gtk_le,
- sizeof(gtk_le));
- if (ret < 0)
-- bphy_err(wiphy, "gtk_key_info iovar failed: ret=%d\n", ret);
-+ bphy_err(drvr, "gtk_key_info iovar failed: ret=%d\n", ret);
-
- return ret;
- }
-@@ -5381,7 +5425,7 @@ static void brcmf_clear_assoc_ies(struct
- static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg,
- struct brcmf_if *ifp)
- {
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_cfg80211_assoc_ielen_le *assoc_info;
- struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg);
- u32 req_len;
-@@ -5393,7 +5437,7 @@ static s32 brcmf_get_assoc_ies(struct br
- err = brcmf_fil_iovar_data_get(ifp, "assoc_info",
- cfg->extra_buf, WL_ASSOC_INFO_MAX);
- if (err) {
-- bphy_err(wiphy, "could not get assoc info (%d)\n", err);
-+ bphy_err(drvr, "could not get assoc info (%d)\n", err);
- return err;
- }
- assoc_info =
-@@ -5405,7 +5449,7 @@ static s32 brcmf_get_assoc_ies(struct br
- cfg->extra_buf,
- WL_ASSOC_INFO_MAX);
- if (err) {
-- bphy_err(wiphy, "could not get assoc req (%d)\n", err);
-+ bphy_err(drvr, "could not get assoc req (%d)\n", err);
- return err;
- }
- conn_info->req_ie_len = req_len;
-@@ -5421,7 +5465,7 @@ static s32 brcmf_get_assoc_ies(struct br
- cfg->extra_buf,
- WL_ASSOC_INFO_MAX);
- if (err) {
-- bphy_err(wiphy, "could not get assoc resp (%d)\n", err);
-+ bphy_err(drvr, "could not get assoc resp (%d)\n", err);
- return err;
- }
- conn_info->resp_ie_len = resp_len;
-@@ -5548,7 +5592,7 @@ brcmf_notify_connect_status_ap(struct br
- struct net_device *ndev,
- const struct brcmf_event_msg *e, void *data)
- {
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
- static int generation;
- u32 event = e->event_code;
- u32 reason = e->reason;
-@@ -5566,7 +5610,7 @@ brcmf_notify_connect_status_ap(struct br
- if (((event == BRCMF_E_ASSOC_IND) || (event == BRCMF_E_REASSOC_IND)) &&
- (reason == BRCMF_E_STATUS_SUCCESS)) {
- if (!data) {
-- bphy_err(wiphy, "No IEs present in ASSOC/REASSOC_IND\n");
-+ bphy_err(drvr, "No IEs present in ASSOC/REASSOC_IND\n");
- return -EINVAL;
- }
-
-@@ -5858,7 +5902,7 @@ static void init_vif_event(struct brcmf_
-
- static s32 brcmf_dongle_roam(struct brcmf_if *ifp)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- s32 err;
- u32 bcn_timeout;
- __le32 roamtrigger[2];
-@@ -5871,7 +5915,7 @@ static s32 brcmf_dongle_roam(struct brcm
- bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON;
- err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout);
- if (err) {
-- bphy_err(wiphy, "bcn_timeout error (%d)\n", err);
-+ bphy_err(drvr, "bcn_timeout error (%d)\n", err);
- goto roam_setup_done;
- }
-
-@@ -5883,7 +5927,7 @@ static s32 brcmf_dongle_roam(struct brcm
- err = brcmf_fil_iovar_int_set(ifp, "roam_off",
- ifp->drvr->settings->roamoff);
- if (err) {
-- bphy_err(wiphy, "roam_off error (%d)\n", err);
-+ bphy_err(drvr, "roam_off error (%d)\n", err);
- goto roam_setup_done;
- }
-
-@@ -5892,7 +5936,7 @@ static s32 brcmf_dongle_roam(struct brcm
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_ROAM_TRIGGER,
- (void *)roamtrigger, sizeof(roamtrigger));
- if (err) {
-- bphy_err(wiphy, "WLC_SET_ROAM_TRIGGER error (%d)\n", err);
-+ bphy_err(drvr, "WLC_SET_ROAM_TRIGGER error (%d)\n", err);
- goto roam_setup_done;
- }
-
-@@ -5901,7 +5945,7 @@ static s32 brcmf_dongle_roam(struct brcm
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_ROAM_DELTA,
- (void *)roam_delta, sizeof(roam_delta));
- if (err) {
-- bphy_err(wiphy, "WLC_SET_ROAM_DELTA error (%d)\n", err);
-+ bphy_err(drvr, "WLC_SET_ROAM_DELTA error (%d)\n", err);
- goto roam_setup_done;
- }
-
-@@ -5912,26 +5956,26 @@ roam_setup_done:
- static s32
- brcmf_dongle_scantime(struct brcmf_if *ifp)
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- s32 err = 0;
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME,
- BRCMF_SCAN_CHANNEL_TIME);
- if (err) {
-- bphy_err(wiphy, "Scan assoc time error (%d)\n", err);
-+ bphy_err(drvr, "Scan assoc time error (%d)\n", err);
- goto dongle_scantime_out;
- }
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_UNASSOC_TIME,
- BRCMF_SCAN_UNASSOC_TIME);
- if (err) {
-- bphy_err(wiphy, "Scan unassoc time error (%d)\n", err);
-+ bphy_err(drvr, "Scan unassoc time error (%d)\n", err);
- goto dongle_scantime_out;
- }
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_PASSIVE_TIME,
- BRCMF_SCAN_PASSIVE_TIME);
- if (err) {
-- bphy_err(wiphy, "Scan passive time error (%d)\n", err);
-+ bphy_err(drvr, "Scan passive time error (%d)\n", err);
- goto dongle_scantime_out;
- }
-
-@@ -5964,7 +6008,8 @@ static int brcmf_construct_chaninfo(stru
- u32 bw_cap[])
- {
- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-- struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
-+ struct brcmf_pub *drvr = cfg->pub;
-+ struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
- struct ieee80211_supported_band *band;
- struct ieee80211_channel *channel;
- struct brcmf_chanspec_list *list;
-@@ -5985,7 +6030,7 @@ static int brcmf_construct_chaninfo(stru
- err = brcmf_fil_iovar_data_get(ifp, "chanspecs", pbuf,
- BRCMF_DCMD_MEDLEN);
- if (err) {
-- bphy_err(wiphy, "get chanspecs error (%d)\n", err);
-+ bphy_err(drvr, "get chanspecs error (%d)\n", err);
- goto fail_pbuf;
- }
-
-@@ -6008,7 +6053,7 @@ static int brcmf_construct_chaninfo(stru
- } else if (ch.band == BRCMU_CHAN_BAND_5G) {
- band = wiphy->bands[NL80211_BAND_5GHZ];
- } else {
-- bphy_err(wiphy, "Invalid channel Spec. 0x%x.\n",
-+ bphy_err(drvr, "Invalid channel Spec. 0x%x.\n",
- ch.chspec);
- continue;
- }
-@@ -6032,7 +6077,7 @@ static int brcmf_construct_chaninfo(stru
- /* It seems firmware supports some channel we never
- * considered. Something new in IEEE standard?
- */
-- bphy_err(wiphy, "Ignoring unexpected firmware channel %d\n",
-+ bphy_err(drvr, "Ignoring unexpected firmware channel %d\n",
- ch.control_ch_num);
- continue;
- }
-@@ -6089,8 +6134,8 @@ fail_pbuf:
-
- static int brcmf_enable_bw40_2g(struct brcmf_cfg80211_info *cfg)
- {
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-- struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
-+ struct brcmf_pub *drvr = cfg->pub;
-+ struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
- struct ieee80211_supported_band *band;
- struct brcmf_fil_bwcap_le band_bwcap;
- struct brcmf_chanspec_list *list;
-@@ -6136,7 +6181,7 @@ static int brcmf_enable_bw40_2g(struct b
- err = brcmf_fil_iovar_data_get(ifp, "chanspecs", pbuf,
- BRCMF_DCMD_MEDLEN);
- if (err) {
-- bphy_err(wiphy, "get chanspecs error (%d)\n", err);
-+ bphy_err(drvr, "get chanspecs error (%d)\n", err);
- kfree(pbuf);
- return err;
- }
-@@ -6167,7 +6212,7 @@ static int brcmf_enable_bw40_2g(struct b
-
- static void brcmf_get_bwcap(struct brcmf_if *ifp, u32 bw_cap[])
- {
-- struct wiphy *wiphy = ifp->drvr->wiphy;
-+ struct brcmf_pub *drvr = ifp->drvr;
- u32 band, mimo_bwcap;
- int err;
-
-@@ -6203,7 +6248,7 @@ static void brcmf_get_bwcap(struct brcmf
- bw_cap[NL80211_BAND_5GHZ] |= WLC_BW_20MHZ_BIT;
- break;
- default:
-- bphy_err(wiphy, "invalid mimo_bw_cap value\n");
-+ bphy_err(drvr, "invalid mimo_bw_cap value\n");
- }
- }
-
-@@ -6278,7 +6323,8 @@ static void brcmf_update_vht_cap(struct
-
- static int brcmf_setup_wiphybands(struct brcmf_cfg80211_info *cfg)
- {
-- struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
-+ struct brcmf_pub *drvr = cfg->pub;
-+ struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
- struct wiphy *wiphy = cfg_to_wiphy(cfg);
- u32 nmode = 0;
- u32 vhtmode = 0;
-@@ -6295,7 +6341,7 @@ static int brcmf_setup_wiphybands(struct
- (void)brcmf_fil_iovar_int_get(ifp, "vhtmode", &vhtmode);
- err = brcmf_fil_iovar_int_get(ifp, "nmode", &nmode);
- if (err) {
-- bphy_err(wiphy, "nmode error (%d)\n", err);
-+ bphy_err(drvr, "nmode error (%d)\n", err);
- } else {
- brcmf_get_bwcap(ifp, bw_cap);
- }
-@@ -6305,7 +6351,7 @@ static int brcmf_setup_wiphybands(struct
-
- err = brcmf_fil_iovar_int_get(ifp, "rxchain", &rxchain);
- if (err) {
-- bphy_err(wiphy, "rxchain error (%d)\n", err);
-+ bphy_err(drvr, "rxchain error (%d)\n", err);
- nchain = 1;
- } else {
- for (nchain = 0; rxchain; nchain++)
-@@ -6315,7 +6361,7 @@ static int brcmf_setup_wiphybands(struct
-
- err = brcmf_construct_chaninfo(cfg, bw_cap);
- if (err) {
-- bphy_err(wiphy, "brcmf_construct_chaninfo failed (%d)\n", err);
-+ bphy_err(drvr, "brcmf_construct_chaninfo failed (%d)\n", err);
- return err;
- }
-
-@@ -6522,12 +6568,13 @@ static void brcmf_wiphy_wowl_params(stru
- {
- #ifdef CONFIG_PM
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct wiphy_wowlan_support *wowl;
-
- wowl = kmemdup(&brcmf_wowlan_support, sizeof(brcmf_wowlan_support),
- GFP_KERNEL);
- if (!wowl) {
-- bphy_err(wiphy, "only support basic wowlan features\n");
-+ bphy_err(drvr, "only support basic wowlan features\n");
- wiphy->wowlan = &brcmf_wowlan_support;
- return;
- }
-@@ -6624,7 +6671,7 @@ static int brcmf_setup_wiphy(struct wiph
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BANDLIST, &bandlist,
- sizeof(bandlist));
- if (err) {
-- bphy_err(wiphy, "could not obtain band info: err=%d\n", err);
-+ bphy_err(drvr, "could not obtain band info: err=%d\n", err);
- return err;
- }
- /* first entry in bandlist is number of bands */
-@@ -6673,7 +6720,7 @@ static int brcmf_setup_wiphy(struct wiph
-
- static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
- {
-- struct wiphy *wiphy = cfg_to_wiphy(cfg);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct net_device *ndev;
- struct wireless_dev *wdev;
- struct brcmf_if *ifp;
-@@ -6711,7 +6758,7 @@ static s32 brcmf_config_dongle(struct br
-
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_FAKEFRAG, 1);
- if (err) {
-- bphy_err(wiphy, "failed to set frameburst mode\n");
-+ bphy_err(drvr, "failed to set frameburst mode\n");
- goto default_conf_out;
- }
-
-@@ -6892,6 +6939,7 @@ static void brcmf_cfg80211_reg_notifier(
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0);
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_fil_country_le ccreq;
- s32 err;
- int i;
-@@ -6903,7 +6951,7 @@ static void brcmf_cfg80211_reg_notifier(
- /* ignore non-ISO3166 country codes */
- for (i = 0; i < 2; i++)
- if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') {
-- bphy_err(wiphy, "not an ISO3166 code (0x%02x 0x%02x)\n",
-+ bphy_err(drvr, "not an ISO3166 code (0x%02x 0x%02x)\n",
- req->alpha2[0], req->alpha2[1]);
- return;
- }
-@@ -6913,7 +6961,7 @@ static void brcmf_cfg80211_reg_notifier(
-
- err = brcmf_fil_iovar_data_get(ifp, "country", &ccreq, sizeof(ccreq));
- if (err) {
-- bphy_err(wiphy, "Country code iovar returned err = %d\n", err);
-+ bphy_err(drvr, "Country code iovar returned err = %d\n", err);
- return;
- }
-
-@@ -6923,7 +6971,7 @@ static void brcmf_cfg80211_reg_notifier(
-
- err = brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
- if (err) {
-- bphy_err(wiphy, "Firmware rejected country setting\n");
-+ bphy_err(drvr, "Firmware rejected country setting\n");
- return;
- }
- brcmf_setup_wiphybands(cfg);
-@@ -6969,13 +7017,13 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- u16 *cap = NULL;
-
- if (!ndev) {
-- bphy_err(wiphy, "ndev is invalid\n");
-+ bphy_err(drvr, "ndev is invalid\n");
- return NULL;
- }
-
- cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
- if (!cfg) {
-- bphy_err(wiphy, "Could not allocate wiphy device\n");
-+ bphy_err(drvr, "Could not allocate wiphy device\n");
- return NULL;
- }
-
-@@ -6996,7 +7044,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
-
- err = wl_init_priv(cfg);
- if (err) {
-- bphy_err(wiphy, "Failed to init iwm_priv (%d)\n", err);
-+ bphy_err(drvr, "Failed to init iwm_priv (%d)\n", err);
- brcmf_free_vif(vif);
- goto wiphy_out;
- }
-@@ -7005,7 +7053,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- /* determine d11 io type before wiphy setup */
- err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_VERSION, &io_type);
- if (err) {
-- bphy_err(wiphy, "Failed to get D11 version (%d)\n", err);
-+ bphy_err(drvr, "Failed to get D11 version (%d)\n", err);
- goto priv_out;
- }
- cfg->d11inf.io_type = (u8)io_type;
-@@ -7039,13 +7087,13 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- #endif
- err = wiphy_register(wiphy);
- if (err < 0) {
-- bphy_err(wiphy, "Could not register wiphy device (%d)\n", err);
-+ bphy_err(drvr, "Could not register wiphy device (%d)\n", err);
- goto priv_out;
- }
-
- err = brcmf_setup_wiphybands(cfg);
- if (err) {
-- bphy_err(wiphy, "Setting wiphy bands failed (%d)\n", err);
-+ bphy_err(drvr, "Setting wiphy bands failed (%d)\n", err);
- goto wiphy_unreg_out;
- }
-
-@@ -7063,24 +7111,24 @@ struct brcmf_cfg80211_info *brcmf_cfg802
-
- err = brcmf_fweh_activate_events(ifp);
- if (err) {
-- bphy_err(wiphy, "FWEH activation failed (%d)\n", err);
-+ bphy_err(drvr, "FWEH activation failed (%d)\n", err);
- goto wiphy_unreg_out;
- }
-
- err = brcmf_p2p_attach(cfg, p2pdev_forced);
- if (err) {
-- bphy_err(wiphy, "P2P initialisation failed (%d)\n", err);
-+ bphy_err(drvr, "P2P initialisation failed (%d)\n", err);
- goto wiphy_unreg_out;
- }
- err = brcmf_btcoex_attach(cfg);
- if (err) {
-- bphy_err(wiphy, "BT-coex initialisation failed (%d)\n", err);
-+ bphy_err(drvr, "BT-coex initialisation failed (%d)\n", err);
- brcmf_p2p_detach(&cfg->p2p);
- goto wiphy_unreg_out;
- }
- err = brcmf_pno_attach(cfg);
- if (err) {
-- bphy_err(wiphy, "PNO initialisation failed (%d)\n", err);
-+ bphy_err(drvr, "PNO initialisation failed (%d)\n", err);
- brcmf_btcoex_detach(cfg);
- brcmf_p2p_detach(&cfg->p2p);
- goto wiphy_unreg_out;
-@@ -7100,7 +7148,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802
- /* (re-) activate FWEH event handling */
- err = brcmf_fweh_activate_events(ifp);
- if (err) {
-- bphy_err(wiphy, "FWEH activation failed (%d)\n", err);
-+ bphy_err(drvr, "FWEH activation failed (%d)\n", err);
- goto detach;
- }
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
-@@ -62,12 +62,12 @@ void __brcmf_err(struct brcmf_bus *bus,
- } while (0)
- #endif
-
--#define bphy_err(wiphy, fmt, ...) \
-+#define bphy_err(drvr, fmt, ...) \
- do { \
- if (IS_ENABLED(CPTCFG_BRCMDBG) || \
- IS_ENABLED(CPTCFG_BRCM_TRACING) || \
- net_ratelimit()) \
-- wiphy_err(wiphy, "%s: " fmt, __func__, \
-+ wiphy_err((drvr)->wiphy, "%s: " fmt, __func__, \
- ##__VA_ARGS__); \
- } while (0)
-
diff --git a/package/kernel/mac80211/patches/brcm/353-v5.1-brcmfmac-remove-set-but-not-used-variable-old_state.patch b/package/kernel/mac80211/patches/brcm/353-v5.1-brcmfmac-remove-set-but-not-used-variable-old_state.patch
deleted file mode 100644
index 2a46378e73..0000000000
--- a/package/kernel/mac80211/patches/brcm/353-v5.1-brcmfmac-remove-set-but-not-used-variable-old_state.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From e4d1b2716b8859199c28f2ac5f984bd05a146a6b Mon Sep 17 00:00:00 2001
-From: YueHaibing <yuehaibing@huawei.com>
-Date: Mon, 18 Feb 2019 08:08:46 +0000
-Subject: [PATCH] brcmfmac: remove set but not used variable 'old_state'
-
-Fixes gcc '-Wunused-but-set-variable' warning:
-
-drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c: In function 'brcmf_usb_state_change':
-drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:578:6: warning:
- variable 'old_state' set but not used [-Wunused-but-set-variable]
-
-It's never used and can be removed.
-
-Signed-off-by: YueHaibing <yuehaibing@huawei.com>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-@@ -575,7 +575,6 @@ static void
- brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
- {
- struct brcmf_bus *bcmf_bus = devinfo->bus_pub.bus;
-- int old_state;
-
- brcmf_dbg(USB, "Enter, current state=%d, new state=%d\n",
- devinfo->bus_pub.state, state);
-@@ -583,7 +582,6 @@ brcmf_usb_state_change(struct brcmf_usbd
- if (devinfo->bus_pub.state == state)
- return;
-
-- old_state = devinfo->bus_pub.state;
- devinfo->bus_pub.state = state;
-
- /* update state of upper layer */
diff --git a/package/kernel/mac80211/patches/brcm/354-v5.1-brcmfmac-use-bphy_err-in-all-wiphy-related-code.patch b/package/kernel/mac80211/patches/brcm/354-v5.1-brcmfmac-use-bphy_err-in-all-wiphy-related-code.patch
deleted file mode 100644
index 5836f6ab87..0000000000
--- a/package/kernel/mac80211/patches/brcm/354-v5.1-brcmfmac-use-bphy_err-in-all-wiphy-related-code.patch
+++ /dev/null
@@ -1,1707 +0,0 @@
-From dcb1471bc6d0541d636c7ecd9239573304842884 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 19 Feb 2019 23:42:19 +0100
-Subject: [PATCH] brcmfmac: use bphy_err() in all wiphy-related code
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This recently added macro provides more meaningful error messages thanks
-to identifying a specific wiphy. It's especially important on systems
-with few cards supported by the same (brcmfmac) driver.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/bcdc.c | 22 ++---
- .../broadcom/brcm80211/brcmfmac/common.c | 39 ++++----
- .../broadcom/brcm80211/brcmfmac/core.c | 74 ++++++++--------
- .../broadcom/brcm80211/brcmfmac/feature.c | 8 +-
- .../broadcom/brcm80211/brcmfmac/fweh.c | 25 +++---
- .../broadcom/brcm80211/brcmfmac/fwil.c | 10 +--
- .../broadcom/brcm80211/brcmfmac/fwsignal.c | 38 ++++----
- .../broadcom/brcm80211/brcmfmac/msgbuf.c | 65 ++++++++------
- .../broadcom/brcm80211/brcmfmac/p2p.c | 88 +++++++++++--------
- .../broadcom/brcm80211/brcmfmac/pno.c | 22 +++--
- .../broadcom/brcm80211/brcmfmac/proto.c | 6 +-
- 11 files changed, 224 insertions(+), 173 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-@@ -178,8 +178,8 @@ brcmf_proto_bcdc_query_dcmd(struct brcmf
- *fwerr = 0;
- ret = brcmf_proto_bcdc_msg(drvr, ifidx, cmd, buf, len, false);
- if (ret < 0) {
-- brcmf_err("brcmf_proto_bcdc_msg failed w/status %d\n",
-- ret);
-+ bphy_err(drvr, "brcmf_proto_bcdc_msg failed w/status %d\n",
-+ ret);
- goto done;
- }
-
-@@ -195,9 +195,9 @@ retry:
- if ((id < bcdc->reqid) && (++retries < RETRIES))
- goto retry;
- if (id != bcdc->reqid) {
-- brcmf_err("%s: unexpected request id %d (expected %d)\n",
-- brcmf_ifname(brcmf_get_ifp(drvr, ifidx)), id,
-- bcdc->reqid);
-+ bphy_err(drvr, "%s: unexpected request id %d (expected %d)\n",
-+ brcmf_ifname(brcmf_get_ifp(drvr, ifidx)), id,
-+ bcdc->reqid);
- ret = -EINVAL;
- goto done;
- }
-@@ -245,9 +245,9 @@ brcmf_proto_bcdc_set_dcmd(struct brcmf_p
- id = (flags & BCDC_DCMD_ID_MASK) >> BCDC_DCMD_ID_SHIFT;
-
- if (id != bcdc->reqid) {
-- brcmf_err("%s: unexpected request id %d (expected %d)\n",
-- brcmf_ifname(brcmf_get_ifp(drvr, ifidx)), id,
-- bcdc->reqid);
-+ bphy_err(drvr, "%s: unexpected request id %d (expected %d)\n",
-+ brcmf_ifname(brcmf_get_ifp(drvr, ifidx)), id,
-+ bcdc->reqid);
- ret = -EINVAL;
- goto done;
- }
-@@ -312,8 +312,8 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu
- }
- if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) !=
- BCDC_PROTO_VER) {
-- brcmf_err("%s: non-BCDC packet received, flags 0x%x\n",
-- brcmf_ifname(tmp_if), h->flags);
-+ bphy_err(drvr, "%s: non-BCDC packet received, flags 0x%x\n",
-+ brcmf_ifname(tmp_if), h->flags);
- return -EBADE;
- }
-
-@@ -460,7 +460,7 @@ int brcmf_proto_bcdc_attach(struct brcmf
-
- /* ensure that the msg buf directly follows the cdc msg struct */
- if ((unsigned long)(&bcdc->msg + 1) != (unsigned long)bcdc->buf) {
-- brcmf_err("struct brcmf_proto_bcdc is not correctly defined\n");
-+ bphy_err(drvr, "struct brcmf_proto_bcdc is not correctly defined\n");
- goto fail;
- }
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-@@ -90,6 +90,7 @@ struct brcmf_mp_global_t brcmf_mp_global
-
- void brcmf_c_set_joinpref_default(struct brcmf_if *ifp)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_join_pref_params join_pref_params[2];
- int err;
-
-@@ -106,7 +107,7 @@ void brcmf_c_set_joinpref_default(struct
- err = brcmf_fil_iovar_data_set(ifp, "join_pref", join_pref_params,
- sizeof(join_pref_params));
- if (err)
-- brcmf_err("Set join_pref error (%d)\n", err);
-+ bphy_err(drvr, "Set join_pref error (%d)\n", err);
- }
-
- static int brcmf_c_download(struct brcmf_if *ifp, u16 flag,
-@@ -129,7 +130,8 @@ static int brcmf_c_download(struct brcmf
-
- static int brcmf_c_process_clm_blob(struct brcmf_if *ifp)
- {
-- struct brcmf_bus *bus = ifp->drvr->bus_if;
-+ struct brcmf_pub *drvr = ifp->drvr;
-+ struct brcmf_bus *bus = drvr->bus_if;
- struct brcmf_dload_data_le *chunk_buf;
- const struct firmware *clm = NULL;
- u8 clm_name[BRCMF_FW_NAME_LEN];
-@@ -145,7 +147,7 @@ static int brcmf_c_process_clm_blob(stru
- memset(clm_name, 0, sizeof(clm_name));
- err = brcmf_bus_get_fwname(bus, ".clm_blob", clm_name);
- if (err) {
-- brcmf_err("get CLM blob file name failed (%d)\n", err);
-+ bphy_err(drvr, "get CLM blob file name failed (%d)\n", err);
- return err;
- }
-
-@@ -182,12 +184,12 @@ static int brcmf_c_process_clm_blob(stru
- } while ((datalen > 0) && (err == 0));
-
- if (err) {
-- brcmf_err("clmload (%zu byte file) failed (%d); ",
-- clm->size, err);
-+ bphy_err(drvr, "clmload (%zu byte file) failed (%d)\n",
-+ clm->size, err);
- /* Retrieve clmload_status and print */
- err = brcmf_fil_iovar_int_get(ifp, "clmload_status", &status);
- if (err)
-- brcmf_err("get clmload_status failed (%d)\n", err);
-+ bphy_err(drvr, "get clmload_status failed (%d)\n", err);
- else
- brcmf_dbg(INFO, "clmload_status=%d\n", status);
- err = -EIO;
-@@ -201,6 +203,7 @@ done:
-
- int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- s8 eventmask[BRCMF_EVENTING_MASK_LEN];
- u8 buf[BRCMF_DCMD_SMLEN];
- struct brcmf_bus *bus;
-@@ -214,7 +217,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
- sizeof(ifp->mac_addr));
- if (err < 0) {
-- brcmf_err("Retrieving cur_etheraddr failed, %d\n", err);
-+ bphy_err(drvr, "Retrieving cur_etheraddr failed, %d\n", err);
- goto done;
- }
- memcpy(ifp->drvr->wiphy->perm_addr, ifp->drvr->mac, ETH_ALEN);
-@@ -226,7 +229,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_REVINFO,
- &revinfo, sizeof(revinfo));
- if (err < 0) {
-- brcmf_err("retrieving revision info failed, %d\n", err);
-+ bphy_err(drvr, "retrieving revision info failed, %d\n", err);
- strlcpy(ri->chipname, "UNKNOWN", sizeof(ri->chipname));
- } else {
- ri->vendorid = le32_to_cpu(revinfo.vendorid);
-@@ -260,7 +263,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- /* Do any CLM downloading */
- err = brcmf_c_process_clm_blob(ifp);
- if (err < 0) {
-- brcmf_err("download CLM blob file failed, %d\n", err);
-+ bphy_err(drvr, "download CLM blob file failed, %d\n", err);
- goto done;
- }
-
-@@ -269,8 +272,8 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- strcpy(buf, "ver");
- err = brcmf_fil_iovar_data_get(ifp, "ver", buf, sizeof(buf));
- if (err < 0) {
-- brcmf_err("Retrieving version information failed, %d\n",
-- err);
-+ bphy_err(drvr, "Retrieving version information failed, %d\n",
-+ err);
- goto done;
- }
- ptr = (char *)buf;
-@@ -304,7 +307,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- /* set mpc */
- err = brcmf_fil_iovar_int_set(ifp, "mpc", 1);
- if (err) {
-- brcmf_err("failed setting mpc\n");
-+ bphy_err(drvr, "failed setting mpc\n");
- goto done;
- }
-
-@@ -314,14 +317,14 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- err = brcmf_fil_iovar_data_get(ifp, "event_msgs", eventmask,
- BRCMF_EVENTING_MASK_LEN);
- if (err) {
-- brcmf_err("Get event_msgs error (%d)\n", err);
-+ bphy_err(drvr, "Get event_msgs error (%d)\n", err);
- goto done;
- }
- setbit(eventmask, BRCMF_E_IF);
- err = brcmf_fil_iovar_data_set(ifp, "event_msgs", eventmask,
- BRCMF_EVENTING_MASK_LEN);
- if (err) {
-- brcmf_err("Set event_msgs error (%d)\n", err);
-+ bphy_err(drvr, "Set event_msgs error (%d)\n", err);
- goto done;
- }
-
-@@ -329,8 +332,8 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME,
- BRCMF_DEFAULT_SCAN_CHANNEL_TIME);
- if (err) {
-- brcmf_err("BRCMF_C_SET_SCAN_CHANNEL_TIME error (%d)\n",
-- err);
-+ bphy_err(drvr, "BRCMF_C_SET_SCAN_CHANNEL_TIME error (%d)\n",
-+ err);
- goto done;
- }
-
-@@ -338,8 +341,8 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_UNASSOC_TIME,
- BRCMF_DEFAULT_SCAN_UNASSOC_TIME);
- if (err) {
-- brcmf_err("BRCMF_C_SET_SCAN_UNASSOC_TIME error (%d)\n",
-- err);
-+ bphy_err(drvr, "BRCMF_C_SET_SCAN_UNASSOC_TIME error (%d)\n",
-+ err);
- goto done;
- }
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -90,7 +90,7 @@ struct brcmf_if *brcmf_get_ifp(struct br
- s32 bsscfgidx;
-
- if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
-- brcmf_err("ifidx %d out of range\n", ifidx);
-+ bphy_err(drvr, "ifidx %d out of range\n", ifidx);
- return NULL;
- }
-
-@@ -141,7 +141,9 @@ void brcmf_configure_arp_nd_offload(stru
-
- static void _brcmf_set_multicast_list(struct work_struct *work)
- {
-- struct brcmf_if *ifp;
-+ struct brcmf_if *ifp = container_of(work, struct brcmf_if,
-+ multicast_work);
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct net_device *ndev;
- struct netdev_hw_addr *ha;
- u32 cmd_value, cnt;
-@@ -150,8 +152,6 @@ static void _brcmf_set_multicast_list(st
- u32 buflen;
- s32 err;
-
-- ifp = container_of(work, struct brcmf_if, multicast_work);
--
- brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
-
- ndev = ifp->ndev;
-@@ -181,7 +181,7 @@ static void _brcmf_set_multicast_list(st
-
- err = brcmf_fil_iovar_data_set(ifp, "mcast_list", buf, buflen);
- if (err < 0) {
-- brcmf_err("Setting mcast_list failed, %d\n", err);
-+ bphy_err(drvr, "Setting mcast_list failed, %d\n", err);
- cmd_value = cnt ? true : cmd_value;
- }
-
-@@ -194,25 +194,25 @@ static void _brcmf_set_multicast_list(st
- */
- err = brcmf_fil_iovar_int_set(ifp, "allmulti", cmd_value);
- if (err < 0)
-- brcmf_err("Setting allmulti failed, %d\n", err);
-+ bphy_err(drvr, "Setting allmulti failed, %d\n", err);
-
- /*Finally, pick up the PROMISC flag */
- cmd_value = (ndev->flags & IFF_PROMISC) ? true : false;
- err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PROMISC, cmd_value);
- if (err < 0)
-- brcmf_err("Setting BRCMF_C_SET_PROMISC failed, %d\n",
-- err);
-+ bphy_err(drvr, "Setting BRCMF_C_SET_PROMISC failed, %d\n",
-+ err);
- brcmf_configure_arp_nd_offload(ifp, !cmd_value);
- }
-
- #if IS_ENABLED(CONFIG_IPV6)
- static void _brcmf_update_ndtable(struct work_struct *work)
- {
-- struct brcmf_if *ifp;
-+ struct brcmf_if *ifp = container_of(work, struct brcmf_if,
-+ ndoffload_work);
-+ struct brcmf_pub *drvr = ifp->drvr;
- int i, ret;
-
-- ifp = container_of(work, struct brcmf_if, ndoffload_work);
--
- /* clear the table in firmware */
- ret = brcmf_fil_iovar_data_set(ifp, "nd_hostip_clear", NULL, 0);
- if (ret) {
-@@ -225,7 +225,7 @@ static void _brcmf_update_ndtable(struct
- &ifp->ipv6_addr_tbl[i],
- sizeof(struct in6_addr));
- if (ret)
-- brcmf_err("add nd ip err %d\n", ret);
-+ bphy_err(drvr, "add nd ip err %d\n", ret);
- }
- }
- #else
-@@ -238,6 +238,7 @@ static int brcmf_netdev_set_mac_address(
- {
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct sockaddr *sa = (struct sockaddr *)addr;
-+ struct brcmf_pub *drvr = ifp->drvr;
- int err;
-
- brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
-@@ -245,7 +246,7 @@ static int brcmf_netdev_set_mac_address(
- err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", sa->sa_data,
- ETH_ALEN);
- if (err < 0) {
-- brcmf_err("Setting cur_etheraddr failed, %d\n", err);
-+ bphy_err(drvr, "Setting cur_etheraddr failed, %d\n", err);
- } else {
- brcmf_dbg(TRACE, "updated to %pM\n", sa->sa_data);
- memcpy(ifp->mac_addr, sa->sa_data, ETH_ALEN);
-@@ -305,7 +306,7 @@ static netdev_tx_t brcmf_netdev_start_xm
-
- /* Can the device send data? */
- if (drvr->bus_if->state != BRCMF_BUS_UP) {
-- brcmf_err("xmit rejected state=%d\n", drvr->bus_if->state);
-+ bphy_err(drvr, "xmit rejected state=%d\n", drvr->bus_if->state);
- netif_stop_queue(ndev);
- dev_kfree_skb(skb);
- ret = -ENODEV;
-@@ -339,8 +340,8 @@ static netdev_tx_t brcmf_netdev_start_xm
- ret = pskb_expand_head(skb, ALIGN(head_delta, NET_SKB_PAD), 0,
- GFP_ATOMIC);
- if (ret < 0) {
-- brcmf_err("%s: failed to expand headroom\n",
-- brcmf_ifname(ifp));
-+ bphy_err(drvr, "%s: failed to expand headroom\n",
-+ brcmf_ifname(ifp));
- atomic_inc(&drvr->bus_if->stats.pktcow_failed);
- goto done;
- }
-@@ -607,7 +608,7 @@ static int brcmf_netdev_open(struct net_
-
- /* If bus is not ready, can't continue */
- if (bus_if->state != BRCMF_BUS_UP) {
-- brcmf_err("failed bus is not ready\n");
-+ bphy_err(drvr, "failed bus is not ready\n");
- return -EAGAIN;
- }
-
-@@ -621,7 +622,7 @@ static int brcmf_netdev_open(struct net_
- ndev->features &= ~NETIF_F_IP_CSUM;
-
- if (brcmf_cfg80211_up(ndev)) {
-- brcmf_err("failed to bring up cfg80211\n");
-+ bphy_err(drvr, "failed to bring up cfg80211\n");
- return -EIO;
- }
-
-@@ -683,7 +684,7 @@ int brcmf_net_attach(struct brcmf_if *if
- else
- err = register_netdev(ndev);
- if (err != 0) {
-- brcmf_err("couldn't register the net device\n");
-+ bphy_err(drvr, "couldn't register the net device\n");
- goto fail;
- }
-
-@@ -760,6 +761,7 @@ static const struct net_device_ops brcmf
-
- static int brcmf_net_p2p_attach(struct brcmf_if *ifp)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct net_device *ndev;
-
- brcmf_dbg(TRACE, "Enter, bsscfgidx=%d mac=%pM\n", ifp->bsscfgidx,
-@@ -772,7 +774,7 @@ static int brcmf_net_p2p_attach(struct b
- memcpy(ndev->dev_addr, ifp->mac_addr, ETH_ALEN);
-
- if (register_netdev(ndev) != 0) {
-- brcmf_err("couldn't register the p2p net device\n");
-+ bphy_err(drvr, "couldn't register the p2p net device\n");
- goto fail;
- }
-
-@@ -801,8 +803,8 @@ struct brcmf_if *brcmf_add_if(struct brc
- */
- if (ifp) {
- if (ifidx) {
-- brcmf_err("ERROR: netdev:%s already exists\n",
-- ifp->ndev->name);
-+ bphy_err(drvr, "ERROR: netdev:%s already exists\n",
-+ ifp->ndev->name);
- netif_stop_queue(ifp->ndev);
- brcmf_net_detach(ifp->ndev, false);
- drvr->iflist[bsscfgidx] = NULL;
-@@ -864,7 +866,7 @@ static void brcmf_del_if(struct brcmf_pu
- ifp = drvr->iflist[bsscfgidx];
- drvr->iflist[bsscfgidx] = NULL;
- if (!ifp) {
-- brcmf_err("Null interface, bsscfgidx=%d\n", bsscfgidx);
-+ bphy_err(drvr, "Null interface, bsscfgidx=%d\n", bsscfgidx);
- return;
- }
- brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", bsscfgidx,
-@@ -914,16 +916,17 @@ static int brcmf_psm_watchdog_notify(str
- const struct brcmf_event_msg *evtmsg,
- void *data)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- int err;
-
- brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx);
-
-- brcmf_err("PSM's watchdog has fired!\n");
-+ bphy_err(drvr, "PSM's watchdog has fired!\n");
-
- err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data,
- evtmsg->datalen);
- if (err)
-- brcmf_err("Failed to get memory dump, %d\n", err);
-+ bphy_err(drvr, "Failed to get memory dump, %d\n", err);
-
- return err;
- }
-@@ -967,7 +970,7 @@ static int brcmf_inetaddr_changed(struct
- ret = brcmf_fil_iovar_data_get(ifp, "arp_hostip", addr_table,
- sizeof(addr_table));
- if (ret) {
-- brcmf_err("fail to get arp ip table err:%d\n", ret);
-+ bphy_err(drvr, "fail to get arp ip table err:%d\n", ret);
- return NOTIFY_OK;
- }
-
-@@ -984,7 +987,7 @@ static int brcmf_inetaddr_changed(struct
- ret = brcmf_fil_iovar_data_set(ifp, "arp_hostip",
- &ifa->ifa_address, sizeof(ifa->ifa_address));
- if (ret)
-- brcmf_err("add arp ip err %d\n", ret);
-+ bphy_err(drvr, "add arp ip err %d\n", ret);
- }
- break;
- case NETDEV_DOWN:
-@@ -996,8 +999,8 @@ static int brcmf_inetaddr_changed(struct
- ret = brcmf_fil_iovar_data_set(ifp, "arp_hostip_clear",
- NULL, 0);
- if (ret) {
-- brcmf_err("fail to clear arp ip table err:%d\n",
-- ret);
-+ bphy_err(drvr, "fail to clear arp ip table err:%d\n",
-+ ret);
- return NOTIFY_OK;
- }
- for (i = 0; i < ARPOL_MAX_ENTRIES; i++) {
-@@ -1007,8 +1010,8 @@ static int brcmf_inetaddr_changed(struct
- &addr_table[i],
- sizeof(addr_table[i]));
- if (ret)
-- brcmf_err("add arp ip err %d\n",
-- ret);
-+ bphy_err(drvr, "add arp ip err %d\n",
-+ ret);
- }
- }
- break;
-@@ -1182,7 +1185,7 @@ static int brcmf_bus_started(struct brcm
- return 0;
-
- fail:
-- brcmf_err("failed: %d\n", ret);
-+ bphy_err(drvr, "failed: %d\n", ret);
- if (drvr->config) {
- brcmf_cfg80211_detach(drvr->config);
- drvr->config = NULL;
-@@ -1234,7 +1237,7 @@ int brcmf_attach(struct device *dev, str
- /* Attach and link in the protocol */
- ret = brcmf_proto_attach(drvr);
- if (ret != 0) {
-- brcmf_err("brcmf_prot_attach failed\n");
-+ bphy_err(drvr, "brcmf_prot_attach failed\n");
- goto fail;
- }
-
-@@ -1247,7 +1250,7 @@ int brcmf_attach(struct device *dev, str
-
- ret = brcmf_bus_started(drvr, ops);
- if (ret != 0) {
-- brcmf_err("dongle is not responding: err=%d\n", ret);
-+ bphy_err(drvr, "dongle is not responding: err=%d\n", ret);
- goto fail;
- }
-
-@@ -1347,6 +1350,7 @@ static int brcmf_get_pend_8021x_cnt(stru
-
- int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- int err;
-
- err = wait_event_timeout(ifp->pend_8021x_wait,
-@@ -1354,7 +1358,7 @@ int brcmf_netdev_wait_pend8021x(struct b
- MAX_WAIT_FOR_8021X_TX);
-
- if (!err)
-- brcmf_err("Timed out waiting for no pending 802.1x packets\n");
-+ bphy_err(drvr, "Timed out waiting for no pending 802.1x packets\n");
-
- return !err;
- }
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
-@@ -185,13 +185,14 @@ static void brcmf_feat_iovar_data_set(st
- #define MAX_CAPS_BUFFER_SIZE 768
- static void brcmf_feat_firmware_capabilities(struct brcmf_if *ifp)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- char caps[MAX_CAPS_BUFFER_SIZE];
- enum brcmf_feat_id id;
- int i, err;
-
- err = brcmf_fil_iovar_data_get(ifp, "cap", caps, sizeof(caps));
- if (err) {
-- brcmf_err("could not get firmware cap (%d)\n", err);
-+ bphy_err(drvr, "could not get firmware cap (%d)\n", err);
- return;
- }
-
-@@ -216,14 +217,15 @@ static void brcmf_feat_firmware_capabili
- static int brcmf_feat_fwcap_debugfs_read(struct seq_file *seq, void *data)
- {
- struct brcmf_bus *bus_if = dev_get_drvdata(seq->private);
-- struct brcmf_if *ifp = brcmf_get_ifp(bus_if->drvr, 0);
-+ struct brcmf_pub *drvr = bus_if->drvr;
-+ struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
- char caps[MAX_CAPS_BUFFER_SIZE + 1] = { };
- char *tmp;
- int err;
-
- err = brcmf_fil_iovar_data_get(ifp, "cap", caps, sizeof(caps));
- if (err) {
-- brcmf_err("could not get firmware cap (%d)\n", err);
-+ bphy_err(drvr, "could not get firmware cap (%d)\n", err);
- return err;
- }
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
-@@ -102,7 +102,8 @@ static void brcmf_fweh_queue_event(struc
- schedule_work(&fweh->event_work);
- }
-
--static int brcmf_fweh_call_event_handler(struct brcmf_if *ifp,
-+static int brcmf_fweh_call_event_handler(struct brcmf_pub *drvr,
-+ struct brcmf_if *ifp,
- enum brcmf_fweh_event_code code,
- struct brcmf_event_msg *emsg,
- void *data)
-@@ -117,9 +118,9 @@ static int brcmf_fweh_call_event_handler
- if (fweh->evt_handler[code])
- err = fweh->evt_handler[code](ifp, emsg, data);
- else
-- brcmf_err("unhandled event %d ignored\n", code);
-+ bphy_err(drvr, "unhandled event %d ignored\n", code);
- } else {
-- brcmf_err("no interface object\n");
-+ bphy_err(drvr, "no interface object\n");
- }
- return err;
- }
-@@ -158,7 +159,7 @@ static void brcmf_fweh_handle_if_event(s
- return;
- }
- if (ifevent->ifidx >= BRCMF_MAX_IFS) {
-- brcmf_err("invalid interface index: %u\n", ifevent->ifidx);
-+ bphy_err(drvr, "invalid interface index: %u\n", ifevent->ifidx);
- return;
- }
-
-@@ -181,7 +182,8 @@ static void brcmf_fweh_handle_if_event(s
- if (ifp && ifevent->action == BRCMF_E_IF_CHANGE)
- brcmf_proto_reset_if(drvr, ifp);
-
-- err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
-+ err = brcmf_fweh_call_event_handler(drvr, ifp, emsg->event_code, emsg,
-+ data);
-
- if (ifp && ifevent->action == BRCMF_E_IF_DEL) {
- bool armed = brcmf_cfg80211_vif_event_armed(drvr->config);
-@@ -268,11 +270,11 @@ static void brcmf_fweh_event_worker(stru
- ifp = drvr->iflist[0];
- else
- ifp = drvr->iflist[emsg.bsscfgidx];
-- err = brcmf_fweh_call_event_handler(ifp, event->code, &emsg,
-- event->data);
-+ err = brcmf_fweh_call_event_handler(drvr, ifp, event->code,
-+ &emsg, event->data);
- if (err) {
-- brcmf_err("event handler failed (%d)\n",
-- event->code);
-+ bphy_err(drvr, "event handler failed (%d)\n",
-+ event->code);
- err = 0;
- }
- event_free:
-@@ -339,7 +341,7 @@ int brcmf_fweh_register(struct brcmf_pub
- brcmf_fweh_handler_t handler)
- {
- if (drvr->fweh.evt_handler[code]) {
-- brcmf_err("event code %d already registered\n", code);
-+ bphy_err(drvr, "event code %d already registered\n", code);
- return -ENOSPC;
- }
- drvr->fweh.evt_handler[code] = handler;
-@@ -369,6 +371,7 @@ void brcmf_fweh_unregister(struct brcmf_
- */
- int brcmf_fweh_activate_events(struct brcmf_if *ifp)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- int i, err;
- s8 eventmask[BRCMF_EVENTING_MASK_LEN];
-
-@@ -388,7 +391,7 @@ int brcmf_fweh_activate_events(struct br
- err = brcmf_fil_iovar_data_set(ifp, "event_msgs",
- eventmask, BRCMF_EVENTING_MASK_LEN);
- if (err)
-- brcmf_err("Set event_msgs error (%d)\n", err);
-+ bphy_err(drvr, "Set event_msgs error (%d)\n", err);
-
- return err;
- }
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c
-@@ -110,7 +110,7 @@ brcmf_fil_cmd_data(struct brcmf_if *ifp,
- s32 err, fwerr;
-
- if (drvr->bus_if->state != BRCMF_BUS_UP) {
-- brcmf_err("bus is down. we have nothing to do.\n");
-+ bphy_err(drvr, "bus is down. we have nothing to do.\n");
- return -EIO;
- }
-
-@@ -242,7 +242,7 @@ brcmf_fil_iovar_data_set(struct brcmf_if
- buflen, true);
- } else {
- err = -EPERM;
-- brcmf_err("Creating iovar failed\n");
-+ bphy_err(drvr, "Creating iovar failed\n");
- }
-
- mutex_unlock(&drvr->proto_block);
-@@ -268,7 +268,7 @@ brcmf_fil_iovar_data_get(struct brcmf_if
- memcpy(data, drvr->proto_buf, len);
- } else {
- err = -EPERM;
-- brcmf_err("Creating iovar failed\n");
-+ bphy_err(drvr, "Creating iovar failed\n");
- }
-
- brcmf_dbg(FIL, "ifidx=%d, name=%s, len=%d\n", ifp->ifidx, name, len);
-@@ -366,7 +366,7 @@ brcmf_fil_bsscfg_data_set(struct brcmf_i
- buflen, true);
- } else {
- err = -EPERM;
-- brcmf_err("Creating bsscfg failed\n");
-+ bphy_err(drvr, "Creating bsscfg failed\n");
- }
-
- mutex_unlock(&drvr->proto_block);
-@@ -392,7 +392,7 @@ brcmf_fil_bsscfg_data_get(struct brcmf_i
- memcpy(data, drvr->proto_buf, len);
- } else {
- err = -EPERM;
-- brcmf_err("Creating bsscfg failed\n");
-+ bphy_err(drvr, "Creating bsscfg failed\n");
- }
- brcmf_dbg(FIL, "ifidx=%d, bsscfgidx=%d, name=%s, len=%d\n", ifp->ifidx,
- ifp->bsscfgidx, name, len);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
-@@ -1255,6 +1255,7 @@ static int brcmf_fws_enq(struct brcmf_fw
- enum brcmf_fws_skb_state state, int fifo,
- struct sk_buff *p)
- {
-+ struct brcmf_pub *drvr = fws->drvr;
- int prec = 2 * fifo;
- u32 *qfull_stat = &fws->stats.delayq_full_error;
- struct brcmf_fws_mac_descriptor *entry;
-@@ -1267,7 +1268,7 @@ static int brcmf_fws_enq(struct brcmf_fw
-
- entry = brcmf_skbcb(p)->mac;
- if (entry == NULL) {
-- brcmf_err("no mac descriptor found for skb %p\n", p);
-+ bphy_err(drvr, "no mac descriptor found for skb %p\n", p);
- return -ENOENT;
- }
-
-@@ -1457,6 +1458,7 @@ static int
- brcmf_fws_txs_process(struct brcmf_fws_info *fws, u8 flags, u32 hslot,
- u32 genbit, u16 seq, u8 compcnt)
- {
-+ struct brcmf_pub *drvr = fws->drvr;
- u32 fifo;
- u8 cnt = 0;
- int ret;
-@@ -1481,14 +1483,14 @@ brcmf_fws_txs_process(struct brcmf_fws_i
- else if (flags == BRCMF_FWS_TXSTATUS_HOST_TOSSED)
- fws->stats.txs_host_tossed += compcnt;
- else
-- brcmf_err("unexpected txstatus\n");
-+ bphy_err(drvr, "unexpected txstatus\n");
-
- while (cnt < compcnt) {
- ret = brcmf_fws_hanger_poppkt(&fws->hanger, hslot, &skb,
- remove_from_hanger);
- if (ret != 0) {
-- brcmf_err("no packet in hanger slot: hslot=%d\n",
-- hslot);
-+ bphy_err(drvr, "no packet in hanger slot: hslot=%d\n",
-+ hslot);
- goto cont;
- }
-
-@@ -1612,12 +1614,13 @@ static int brcmf_fws_notify_credit_map(s
- const struct brcmf_event_msg *e,
- void *data)
- {
-- struct brcmf_fws_info *fws = drvr_to_fws(ifp->drvr);
-+ struct brcmf_pub *drvr = ifp->drvr;
-+ struct brcmf_fws_info *fws = drvr_to_fws(drvr);
- int i;
- u8 *credits = data;
-
- if (e->datalen < BRCMF_FWS_FIFO_COUNT) {
-- brcmf_err("event payload too small (%d)\n", e->datalen);
-+ bphy_err(drvr, "event payload too small (%d)\n", e->datalen);
- return -EINVAL;
- }
-
-@@ -1681,6 +1684,7 @@ static void brcmf_rxreorder_get_skb_list
-
- void brcmf_fws_rxreorder(struct brcmf_if *ifp, struct sk_buff *pkt)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- u8 *reorder_data;
- u8 flow_id, max_idx, cur_idx, exp_idx, end_idx;
- struct brcmf_ampdu_rx_reorder *rfi;
-@@ -1695,7 +1699,7 @@ void brcmf_fws_rxreorder(struct brcmf_if
-
- /* validate flags and flow id */
- if (flags == 0xFF) {
-- brcmf_err("invalid flags...so ignore this packet\n");
-+ bphy_err(drvr, "invalid flags...so ignore this packet\n");
- brcmf_netif_rx(ifp, pkt);
- return;
- }
-@@ -1732,7 +1736,7 @@ void brcmf_fws_rxreorder(struct brcmf_if
- flow_id, max_idx);
- rfi = kzalloc(buf_size, GFP_ATOMIC);
- if (rfi == NULL) {
-- brcmf_err("failed to alloc buffer\n");
-+ bphy_err(drvr, "failed to alloc buffer\n");
- brcmf_netif_rx(ifp, pkt);
- return;
- }
-@@ -1996,6 +2000,7 @@ static u8 brcmf_fws_precommit_skb(struct
- static void brcmf_fws_rollback_toq(struct brcmf_fws_info *fws,
- struct sk_buff *skb, int fifo)
- {
-+ struct brcmf_pub *drvr = fws->drvr;
- struct brcmf_fws_mac_descriptor *entry;
- struct sk_buff *pktout;
- int qidx, hslot;
-@@ -2009,11 +2014,11 @@ static void brcmf_fws_rollback_toq(struc
-
- pktout = brcmu_pktq_penq_head(&entry->psq, qidx, skb);
- if (pktout == NULL) {
-- brcmf_err("%s queue %d full\n", entry->name, qidx);
-+ bphy_err(drvr, "%s queue %d full\n", entry->name, qidx);
- rc = -ENOSPC;
- }
- } else {
-- brcmf_err("%s entry removed\n", entry->name);
-+ bphy_err(drvr, "%s entry removed\n", entry->name);
- rc = -ENOENT;
- }
-
-@@ -2118,7 +2123,8 @@ static int brcmf_fws_assign_htod(struct
-
- int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
- {
-- struct brcmf_fws_info *fws = drvr_to_fws(ifp->drvr);
-+ struct brcmf_pub *drvr = ifp->drvr;
-+ struct brcmf_fws_info *fws = drvr_to_fws(drvr);
- struct brcmf_skbuff_cb *skcb = brcmf_skbcb(skb);
- struct ethhdr *eh = (struct ethhdr *)(skb->data);
- int fifo = BRCMF_FWS_FIFO_BCMC;
-@@ -2146,7 +2152,7 @@ int brcmf_fws_process_skb(struct brcmf_i
- brcmf_fws_enq(fws, BRCMF_FWS_SKBSTATE_DELAYED, fifo, skb);
- brcmf_fws_schedule_deq(fws);
- } else {
-- brcmf_err("drop skb: no hanger slot\n");
-+ bphy_err(drvr, "drop skb: no hanger slot\n");
- brcmf_txfinalize(ifp, skb, false);
- rc = -ENOMEM;
- }
-@@ -2365,7 +2371,7 @@ struct brcmf_fws_info *brcmf_fws_attach(
-
- fws->fws_wq = create_singlethread_workqueue("brcmf_fws_wq");
- if (fws->fws_wq == NULL) {
-- brcmf_err("workqueue creation failed\n");
-+ bphy_err(drvr, "workqueue creation failed\n");
- rc = -EBADF;
- goto fail;
- }
-@@ -2381,13 +2387,13 @@ struct brcmf_fws_info *brcmf_fws_attach(
- rc = brcmf_fweh_register(drvr, BRCMF_E_FIFO_CREDIT_MAP,
- brcmf_fws_notify_credit_map);
- if (rc < 0) {
-- brcmf_err("register credit map handler failed\n");
-+ bphy_err(drvr, "register credit map handler failed\n");
- goto fail;
- }
- rc = brcmf_fweh_register(drvr, BRCMF_E_BCMC_CREDIT_SUPPORT,
- brcmf_fws_notify_bcmc_credit_support);
- if (rc < 0) {
-- brcmf_err("register bcmc credit handler failed\n");
-+ bphy_err(drvr, "register bcmc credit handler failed\n");
- brcmf_fweh_unregister(drvr, BRCMF_E_FIFO_CREDIT_MAP);
- goto fail;
- }
-@@ -2399,7 +2405,7 @@ struct brcmf_fws_info *brcmf_fws_attach(
- fws->fw_signals = true;
- ifp = brcmf_get_ifp(drvr, 0);
- if (brcmf_fil_iovar_int_set(ifp, "tlv", tlv)) {
-- brcmf_err("failed to set bdcv2 tlv signaling\n");
-+ bphy_err(drvr, "failed to set bdcv2 tlv signaling\n");
- fws->fcmode = BRCMF_FWS_FCMODE_NONE;
- fws->fw_signals = false;
- }
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-@@ -439,7 +439,7 @@ static int brcmf_msgbuf_tx_ioctl(struct
- brcmf_commonring_lock(commonring);
- ret_ptr = brcmf_commonring_reserve_for_write(commonring);
- if (!ret_ptr) {
-- brcmf_err("Failed to reserve space in commonring\n");
-+ bphy_err(drvr, "Failed to reserve space in commonring\n");
- brcmf_commonring_unlock(commonring);
- return -ENOMEM;
- }
-@@ -503,7 +503,7 @@ static int brcmf_msgbuf_query_dcmd(struc
-
- timeout = brcmf_msgbuf_ioctl_resp_wait(msgbuf);
- if (!timeout) {
-- brcmf_err("Timeout on response for query command\n");
-+ bphy_err(drvr, "Timeout on response for query command\n");
- return -EIO;
- }
-
-@@ -580,6 +580,7 @@ static u32
- brcmf_msgbuf_flowring_create_worker(struct brcmf_msgbuf *msgbuf,
- struct brcmf_msgbuf_work_item *work)
- {
-+ struct brcmf_pub *drvr = msgbuf->drvr;
- struct msgbuf_tx_flowring_create_req *create;
- struct brcmf_commonring *commonring;
- void *ret_ptr;
-@@ -595,7 +596,7 @@ brcmf_msgbuf_flowring_create_worker(stru
- &msgbuf->flowring_dma_handle[flowid],
- GFP_KERNEL);
- if (!dma_buf) {
-- brcmf_err("dma_alloc_coherent failed\n");
-+ bphy_err(drvr, "dma_alloc_coherent failed\n");
- brcmf_flowring_delete(msgbuf->flow, flowid);
- return BRCMF_FLOWRING_INVALID_ID;
- }
-@@ -608,7 +609,7 @@ brcmf_msgbuf_flowring_create_worker(stru
- brcmf_commonring_lock(commonring);
- ret_ptr = brcmf_commonring_reserve_for_write(commonring);
- if (!ret_ptr) {
-- brcmf_err("Failed to reserve space in commonring\n");
-+ bphy_err(drvr, "Failed to reserve space in commonring\n");
- brcmf_commonring_unlock(commonring);
- brcmf_msgbuf_remove_flowring(msgbuf, flowid);
- return BRCMF_FLOWRING_INVALID_ID;
-@@ -635,7 +636,7 @@ brcmf_msgbuf_flowring_create_worker(stru
- err = brcmf_commonring_write_complete(commonring);
- brcmf_commonring_unlock(commonring);
- if (err) {
-- brcmf_err("Failed to write commonring\n");
-+ bphy_err(drvr, "Failed to write commonring\n");
- brcmf_msgbuf_remove_flowring(msgbuf, flowid);
- return BRCMF_FLOWRING_INVALID_ID;
- }
-@@ -694,6 +695,7 @@ static u32 brcmf_msgbuf_flowring_create(
- static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u16 flowid)
- {
- struct brcmf_flowring *flow = msgbuf->flow;
-+ struct brcmf_pub *drvr = msgbuf->drvr;
- struct brcmf_commonring *commonring;
- void *ret_ptr;
- u32 count;
-@@ -713,8 +715,8 @@ static void brcmf_msgbuf_txflow(struct b
- while (brcmf_flowring_qlen(flow, flowid)) {
- skb = brcmf_flowring_dequeue(flow, flowid);
- if (skb == NULL) {
-- brcmf_err("No SKB, but qlen %d\n",
-- brcmf_flowring_qlen(flow, flowid));
-+ bphy_err(drvr, "No SKB, but qlen %d\n",
-+ brcmf_flowring_qlen(flow, flowid));
- break;
- }
- skb_orphan(skb);
-@@ -722,7 +724,7 @@ static void brcmf_msgbuf_txflow(struct b
- msgbuf->tx_pktids, skb, ETH_HLEN,
- &physaddr, &pktid)) {
- brcmf_flowring_reinsert(flow, flowid, skb);
-- brcmf_err("No PKTID available !!\n");
-+ bphy_err(drvr, "No PKTID available !!\n");
- break;
- }
- ret_ptr = brcmf_commonring_reserve_for_write(commonring);
-@@ -893,6 +895,7 @@ brcmf_msgbuf_process_txstatus(struct brc
-
- static u32 brcmf_msgbuf_rxbuf_data_post(struct brcmf_msgbuf *msgbuf, u32 count)
- {
-+ struct brcmf_pub *drvr = msgbuf->drvr;
- struct brcmf_commonring *commonring;
- void *ret_ptr;
- struct sk_buff *skb;
-@@ -920,7 +923,7 @@ static u32 brcmf_msgbuf_rxbuf_data_post(
- skb = brcmu_pkt_buf_get_skb(BRCMF_MSGBUF_MAX_PKT_SIZE);
-
- if (skb == NULL) {
-- brcmf_err("Failed to alloc SKB\n");
-+ bphy_err(drvr, "Failed to alloc SKB\n");
- brcmf_commonring_write_cancel(commonring, alloced - i);
- break;
- }
-@@ -930,7 +933,7 @@ static u32 brcmf_msgbuf_rxbuf_data_post(
- msgbuf->rx_pktids, skb, 0,
- &physaddr, &pktid)) {
- dev_kfree_skb_any(skb);
-- brcmf_err("No PKTID available !!\n");
-+ bphy_err(drvr, "No PKTID available !!\n");
- brcmf_commonring_write_cancel(commonring, alloced - i);
- break;
- }
-@@ -1000,6 +1003,7 @@ static u32
- brcmf_msgbuf_rxbuf_ctrl_post(struct brcmf_msgbuf *msgbuf, bool event_buf,
- u32 count)
- {
-+ struct brcmf_pub *drvr = msgbuf->drvr;
- struct brcmf_commonring *commonring;
- void *ret_ptr;
- struct sk_buff *skb;
-@@ -1017,7 +1021,7 @@ brcmf_msgbuf_rxbuf_ctrl_post(struct brcm
- count,
- &alloced);
- if (!ret_ptr) {
-- brcmf_err("Failed to reserve space in commonring\n");
-+ bphy_err(drvr, "Failed to reserve space in commonring\n");
- brcmf_commonring_unlock(commonring);
- return 0;
- }
-@@ -1029,7 +1033,7 @@ brcmf_msgbuf_rxbuf_ctrl_post(struct brcm
- skb = brcmu_pkt_buf_get_skb(BRCMF_MSGBUF_MAX_PKT_SIZE);
-
- if (skb == NULL) {
-- brcmf_err("Failed to alloc SKB\n");
-+ bphy_err(drvr, "Failed to alloc SKB\n");
- brcmf_commonring_write_cancel(commonring, alloced - i);
- break;
- }
-@@ -1039,7 +1043,7 @@ brcmf_msgbuf_rxbuf_ctrl_post(struct brcm
- msgbuf->rx_pktids, skb, 0,
- &physaddr, &pktid)) {
- dev_kfree_skb_any(skb);
-- brcmf_err("No PKTID available !!\n");
-+ bphy_err(drvr, "No PKTID available !!\n");
- brcmf_commonring_write_cancel(commonring, alloced - i);
- break;
- }
-@@ -1091,6 +1095,7 @@ static void brcmf_msgbuf_rxbuf_event_pos
-
- static void brcmf_msgbuf_process_event(struct brcmf_msgbuf *msgbuf, void *buf)
- {
-+ struct brcmf_pub *drvr = msgbuf->drvr;
- struct msgbuf_rx_event *event;
- u32 idx;
- u16 buflen;
-@@ -1117,8 +1122,8 @@ static void brcmf_msgbuf_process_event(s
-
- ifp = brcmf_get_ifp(msgbuf->drvr, event->msg.ifidx);
- if (!ifp || !ifp->ndev) {
-- brcmf_err("Received pkt for invalid ifidx %d\n",
-- event->msg.ifidx);
-+ bphy_err(drvr, "Received pkt for invalid ifidx %d\n",
-+ event->msg.ifidx);
- goto exit;
- }
-
-@@ -1134,6 +1139,7 @@ exit:
- static void
- brcmf_msgbuf_process_rx_complete(struct brcmf_msgbuf *msgbuf, void *buf)
- {
-+ struct brcmf_pub *drvr = msgbuf->drvr;
- struct msgbuf_rx_complete *rx_complete;
- struct sk_buff *skb;
- u16 data_offset;
-@@ -1167,7 +1173,7 @@ brcmf_msgbuf_process_rx_complete(struct
- ifp = msgbuf->drvr->mon_if;
-
- if (!ifp) {
-- brcmf_err("Received unexpected monitor pkt\n");
-+ bphy_err(drvr, "Received unexpected monitor pkt\n");
- brcmu_pkt_buf_free_skb(skb);
- return;
- }
-@@ -1178,8 +1184,8 @@ brcmf_msgbuf_process_rx_complete(struct
-
- ifp = brcmf_get_ifp(msgbuf->drvr, rx_complete->msg.ifidx);
- if (!ifp || !ifp->ndev) {
-- brcmf_err("Received pkt for invalid ifidx %d\n",
-- rx_complete->msg.ifidx);
-+ bphy_err(drvr, "Received pkt for invalid ifidx %d\n",
-+ rx_complete->msg.ifidx);
- brcmu_pkt_buf_free_skb(skb);
- return;
- }
-@@ -1192,13 +1198,15 @@ static void brcmf_msgbuf_process_ring_st
- void *buf)
- {
- struct msgbuf_ring_status *ring_status = buf;
-+ struct brcmf_pub *drvr = msgbuf->drvr;
- int err;
-
- err = le16_to_cpu(ring_status->compl_hdr.status);
- if (err) {
- int ring = le16_to_cpu(ring_status->compl_hdr.flow_ring_id);
-
-- brcmf_err("Firmware reported ring %d error: %d\n", ring, err);
-+ bphy_err(drvr, "Firmware reported ring %d error: %d\n", ring,
-+ err);
- }
- }
-
-@@ -1206,6 +1214,7 @@ static void
- brcmf_msgbuf_process_flow_ring_create_response(struct brcmf_msgbuf *msgbuf,
- void *buf)
- {
-+ struct brcmf_pub *drvr = msgbuf->drvr;
- struct msgbuf_flowring_create_resp *flowring_create_resp;
- u16 status;
- u16 flowid;
-@@ -1217,7 +1226,7 @@ brcmf_msgbuf_process_flow_ring_create_re
- status = le16_to_cpu(flowring_create_resp->compl_hdr.status);
-
- if (status) {
-- brcmf_err("Flowring creation failed, code %d\n", status);
-+ bphy_err(drvr, "Flowring creation failed, code %d\n", status);
- brcmf_msgbuf_remove_flowring(msgbuf, flowid);
- return;
- }
-@@ -1234,6 +1243,7 @@ static void
- brcmf_msgbuf_process_flow_ring_delete_response(struct brcmf_msgbuf *msgbuf,
- void *buf)
- {
-+ struct brcmf_pub *drvr = msgbuf->drvr;
- struct msgbuf_flowring_delete_resp *flowring_delete_resp;
- u16 status;
- u16 flowid;
-@@ -1245,7 +1255,7 @@ brcmf_msgbuf_process_flow_ring_delete_re
- status = le16_to_cpu(flowring_delete_resp->compl_hdr.status);
-
- if (status) {
-- brcmf_err("Flowring deletion failed, code %d\n", status);
-+ bphy_err(drvr, "Flowring deletion failed, code %d\n", status);
- brcmf_flowring_delete(msgbuf->flow, flowid);
- return;
- }
-@@ -1258,6 +1268,7 @@ brcmf_msgbuf_process_flow_ring_delete_re
-
- static void brcmf_msgbuf_process_msgtype(struct brcmf_msgbuf *msgbuf, void *buf)
- {
-+ struct brcmf_pub *drvr = msgbuf->drvr;
- struct msgbuf_common_hdr *msg;
-
- msg = (struct msgbuf_common_hdr *)buf;
-@@ -1294,7 +1305,7 @@ static void brcmf_msgbuf_process_msgtype
- brcmf_msgbuf_process_rx_complete(msgbuf, buf);
- break;
- default:
-- brcmf_err("Unsupported msgtype %d\n", msg->msgtype);
-+ bphy_err(drvr, "Unsupported msgtype %d\n", msg->msgtype);
- break;
- }
- }
-@@ -1377,7 +1388,7 @@ void brcmf_msgbuf_delete_flowring(struct
- brcmf_commonring_lock(commonring);
- ret_ptr = brcmf_commonring_reserve_for_write(commonring);
- if (!ret_ptr) {
-- brcmf_err("FW unaware, flowring will be removed !!\n");
-+ bphy_err(drvr, "FW unaware, flowring will be removed !!\n");
- brcmf_commonring_unlock(commonring);
- brcmf_msgbuf_remove_flowring(msgbuf, flowid);
- return;
-@@ -1401,7 +1412,7 @@ void brcmf_msgbuf_delete_flowring(struct
- err = brcmf_commonring_write_complete(commonring);
- brcmf_commonring_unlock(commonring);
- if (err) {
-- brcmf_err("Failed to submit RING_DELETE, flowring will be removed\n");
-+ bphy_err(drvr, "Failed to submit RING_DELETE, flowring will be removed\n");
- brcmf_msgbuf_remove_flowring(msgbuf, flowid);
- }
- }
-@@ -1476,8 +1487,8 @@ int brcmf_proto_msgbuf_attach(struct brc
- if_msgbuf = drvr->bus_if->msgbuf;
-
- if (if_msgbuf->max_flowrings >= BRCMF_FLOWRING_HASHSIZE) {
-- brcmf_err("driver not configured for this many flowrings %d\n",
-- if_msgbuf->max_flowrings);
-+ bphy_err(drvr, "driver not configured for this many flowrings %d\n",
-+ if_msgbuf->max_flowrings);
- if_msgbuf->max_flowrings = BRCMF_FLOWRING_HASHSIZE - 1;
- }
-
-@@ -1487,7 +1498,7 @@ int brcmf_proto_msgbuf_attach(struct brc
-
- msgbuf->txflow_wq = create_singlethread_workqueue("msgbuf_txflow");
- if (msgbuf->txflow_wq == NULL) {
-- brcmf_err("workqueue creation failed\n");
-+ bphy_err(drvr, "workqueue creation failed\n");
- goto fail;
- }
- INIT_WORK(&msgbuf->txflow_work, brcmf_msgbuf_txflow_worker);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
-@@ -434,6 +434,7 @@ static void brcmf_p2p_print_actframe(boo
- */
- static int brcmf_p2p_set_firmware(struct brcmf_if *ifp, u8 *p2p_mac)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- s32 ret = 0;
-
- brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1);
-@@ -450,7 +451,7 @@ static int brcmf_p2p_set_firmware(struct
- ret = brcmf_fil_iovar_data_set(ifp, "p2p_da_override", p2p_mac,
- ETH_ALEN);
- if (ret)
-- brcmf_err("failed to update device address ret %d\n", ret);
-+ bphy_err(drvr, "failed to update device address ret %d\n", ret);
-
- return ret;
- }
-@@ -570,13 +571,14 @@ static s32 brcmf_p2p_deinit_discovery(st
- */
- static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p)
- {
-+ struct brcmf_pub *drvr = p2p->cfg->pub;
- struct brcmf_cfg80211_vif *vif;
- s32 ret = 0;
-
- brcmf_dbg(TRACE, "enter\n");
- vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
- if (!vif) {
-- brcmf_err("P2P config device not available\n");
-+ bphy_err(drvr, "P2P config device not available\n");
- ret = -EPERM;
- goto exit;
- }
-@@ -590,13 +592,13 @@ static int brcmf_p2p_enable_discovery(st
- vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif;
- ret = brcmf_fil_iovar_int_set(vif->ifp, "p2p_disc", 1);
- if (ret < 0) {
-- brcmf_err("set p2p_disc error\n");
-+ bphy_err(drvr, "set p2p_disc error\n");
- goto exit;
- }
- vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
- ret = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_SCAN, 0, 0);
- if (ret < 0) {
-- brcmf_err("unable to set WL_P2P_DISC_ST_SCAN\n");
-+ bphy_err(drvr, "unable to set WL_P2P_DISC_ST_SCAN\n");
- goto exit;
- }
-
-@@ -608,7 +610,7 @@ static int brcmf_p2p_enable_discovery(st
- */
- ret = brcmf_fil_bsscfg_int_set(vif->ifp, "wsec", AES_ENABLED);
- if (ret < 0) {
-- brcmf_err("wsec error %d\n", ret);
-+ bphy_err(drvr, "wsec error %d\n", ret);
- goto exit;
- }
-
-@@ -630,6 +632,7 @@ static s32 brcmf_p2p_escan(struct brcmf_
- u16 chanspecs[], s32 search_state,
- enum p2p_bss_type bss_type)
- {
-+ struct brcmf_pub *drvr = p2p->cfg->pub;
- s32 ret = 0;
- s32 memsize = offsetof(struct brcmf_p2p_scan_le,
- eparams.params_le.channel_list);
-@@ -648,7 +651,7 @@ static s32 brcmf_p2p_escan(struct brcmf_
-
- vif = p2p->bss_idx[bss_type].vif;
- if (vif == NULL) {
-- brcmf_err("no vif for bss type %d\n", bss_type);
-+ bphy_err(drvr, "no vif for bss type %d\n", bss_type);
- ret = -EINVAL;
- goto exit;
- }
-@@ -676,7 +679,7 @@ static s32 brcmf_p2p_escan(struct brcmf_
- BRCMF_P2P_WILDCARD_SSID_LEN);
- break;
- default:
-- brcmf_err(" invalid search state %d\n", search_state);
-+ bphy_err(drvr, " invalid search state %d\n", search_state);
- ret = -EINVAL;
- goto exit;
- }
-@@ -760,6 +763,7 @@ static s32 brcmf_p2p_run_escan(struct br
- struct cfg80211_scan_request *request)
- {
- struct brcmf_p2p_info *p2p = &cfg->p2p;
-+ struct brcmf_pub *drvr = cfg->pub;
- s32 err = 0;
- s32 search_state = WL_P2P_DISC_ST_SCAN;
- struct brcmf_cfg80211_vif *vif;
-@@ -822,7 +826,7 @@ static s32 brcmf_p2p_run_escan(struct br
- }
- exit:
- if (err)
-- brcmf_err("error (%d)\n", err);
-+ bphy_err(drvr, "error (%d)\n", err);
- return err;
- }
-
-@@ -917,19 +921,20 @@ int brcmf_p2p_scan_prep(struct wiphy *wi
- static s32
- brcmf_p2p_discover_listen(struct brcmf_p2p_info *p2p, u16 channel, u32 duration)
- {
-+ struct brcmf_pub *drvr = p2p->cfg->pub;
- struct brcmf_cfg80211_vif *vif;
- struct brcmu_chan ch;
- s32 err = 0;
-
- vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
- if (!vif) {
-- brcmf_err("Discovery is not set, so we have nothing to do\n");
-+ bphy_err(drvr, "Discovery is not set, so we have nothing to do\n");
- err = -EPERM;
- goto exit;
- }
-
- if (test_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status)) {
-- brcmf_err("Previous LISTEN is not completed yet\n");
-+ bphy_err(drvr, "Previous LISTEN is not completed yet\n");
- /* WAR: prevent cookie mismatch in wpa_supplicant return OK */
- goto exit;
- }
-@@ -1046,6 +1051,7 @@ void brcmf_p2p_cancel_remain_on_channel(
- */
- static s32 brcmf_p2p_act_frm_search(struct brcmf_p2p_info *p2p, u16 channel)
- {
-+ struct brcmf_pub *drvr = p2p->cfg->pub;
- s32 err;
- u32 channel_cnt;
- u16 *default_chan_list;
-@@ -1061,7 +1067,7 @@ static s32 brcmf_p2p_act_frm_search(stru
- default_chan_list = kcalloc(channel_cnt, sizeof(*default_chan_list),
- GFP_KERNEL);
- if (default_chan_list == NULL) {
-- brcmf_err("channel list allocation failed\n");
-+ bphy_err(drvr, "channel list allocation failed\n");
- err = -ENOMEM;
- goto exit;
- }
-@@ -1103,6 +1109,7 @@ static void brcmf_p2p_afx_handler(struct
- struct brcmf_p2p_info *p2p = container_of(afx_hdl,
- struct brcmf_p2p_info,
- afx_hdl);
-+ struct brcmf_pub *drvr = p2p->cfg->pub;
- s32 err;
-
- if (!afx_hdl->is_active)
-@@ -1116,7 +1123,7 @@ static void brcmf_p2p_afx_handler(struct
- err = brcmf_p2p_act_frm_search(p2p, afx_hdl->peer_listen_chan);
-
- if (err) {
-- brcmf_err("ERROR occurred! value is (%d)\n", err);
-+ bphy_err(drvr, "ERROR occurred! value is (%d)\n", err);
- if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL,
- &p2p->status))
- complete(&afx_hdl->act_frm_scan);
-@@ -1338,7 +1345,8 @@ int brcmf_p2p_notify_action_frame_rx(str
- const struct brcmf_event_msg *e,
- void *data)
- {
-- struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
-+ struct brcmf_pub *drvr = ifp->drvr;
-+ struct brcmf_cfg80211_info *cfg = drvr->config;
- struct brcmf_p2p_info *p2p = &cfg->p2p;
- struct afx_hdl *afx_hdl = &p2p->afx_hdl;
- struct wireless_dev *wdev;
-@@ -1409,7 +1417,7 @@ int brcmf_p2p_notify_action_frame_rx(str
- mgmt_frame = kzalloc(offsetof(struct ieee80211_mgmt, u) +
- mgmt_frame_len, GFP_KERNEL);
- if (!mgmt_frame) {
-- brcmf_err("No memory available for action frame\n");
-+ bphy_err(drvr, "No memory available for action frame\n");
- return -ENOMEM;
- }
- memcpy(mgmt_frame->da, ifp->mac_addr, ETH_ALEN);
-@@ -1492,6 +1500,7 @@ int brcmf_p2p_notify_action_tx_complete(
- static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p,
- struct brcmf_fil_af_params_le *af_params)
- {
-+ struct brcmf_pub *drvr = p2p->cfg->pub;
- struct brcmf_cfg80211_vif *vif;
- s32 err = 0;
- s32 timeout = 0;
-@@ -1506,7 +1515,7 @@ static s32 brcmf_p2p_tx_action_frame(str
- err = brcmf_fil_bsscfg_data_set(vif->ifp, "actframe", af_params,
- sizeof(*af_params));
- if (err) {
-- brcmf_err(" sending action frame has failed\n");
-+ bphy_err(drvr, " sending action frame has failed\n");
- goto exit;
- }
-
-@@ -1556,6 +1565,7 @@ static s32 brcmf_p2p_pub_af_tx(struct br
- struct brcmf_config_af_params *config_af_params)
- {
- struct brcmf_p2p_info *p2p = &cfg->p2p;
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_fil_action_frame_le *action_frame;
- struct brcmf_p2p_pub_act_frame *act_frm;
- s32 err = 0;
-@@ -1634,8 +1644,8 @@ static s32 brcmf_p2p_pub_af_tx(struct br
- config_af_params->extra_listen = false;
- break;
- default:
-- brcmf_err("Unknown p2p pub act frame subtype: %d\n",
-- act_frm->subtype);
-+ bphy_err(drvr, "Unknown p2p pub act frame subtype: %d\n",
-+ act_frm->subtype);
- err = -EINVAL;
- }
- return err;
-@@ -1657,6 +1667,7 @@ bool brcmf_p2p_send_action_frame(struct
- struct brcmf_fil_action_frame_le *action_frame;
- struct brcmf_config_af_params config_af_params;
- struct afx_hdl *afx_hdl = &p2p->afx_hdl;
-+ struct brcmf_pub *drvr = cfg->pub;
- u16 action_frame_len;
- bool ack = false;
- u8 category;
-@@ -1692,7 +1703,7 @@ bool brcmf_p2p_send_action_frame(struct
- if (brcmf_p2p_pub_af_tx(cfg, af_params, &config_af_params)) {
- /* Just send unknown subtype frame with */
- /* default parameters. */
-- brcmf_err("P2P Public action frame, unknown subtype.\n");
-+ bphy_err(drvr, "P2P Public action frame, unknown subtype.\n");
- }
- } else if (brcmf_p2p_is_gas_action(action_frame->data,
- action_frame_len)) {
-@@ -1714,7 +1725,7 @@ bool brcmf_p2p_send_action_frame(struct
- af_params->dwell_time =
- cpu_to_le32(P2P_AF_MIN_DWELL_TIME);
- } else {
-- brcmf_err("Unknown action type: %d\n", action);
-+ bphy_err(drvr, "Unknown action type: %d\n", action);
- goto exit;
- }
- } else if (brcmf_p2p_is_p2p_action(action_frame->data,
-@@ -1722,8 +1733,8 @@ bool brcmf_p2p_send_action_frame(struct
- /* do not configure anything. it will be */
- /* sent with a default configuration */
- } else {
-- brcmf_err("Unknown Frame: category 0x%x, action 0x%x\n",
-- category, action);
-+ bphy_err(drvr, "Unknown Frame: category 0x%x, action 0x%x\n",
-+ category, action);
- return false;
- }
-
-@@ -1761,7 +1772,7 @@ bool brcmf_p2p_send_action_frame(struct
-
- if (brcmf_p2p_af_searching_channel(p2p) ==
- P2P_INVALID_CHANNEL) {
-- brcmf_err("Couldn't find peer's channel.\n");
-+ bphy_err(drvr, "Couldn't find peer's channel.\n");
- goto exit;
- }
-
-@@ -1783,7 +1794,8 @@ bool brcmf_p2p_send_action_frame(struct
- tx_retry++;
- }
- if (ack == false) {
-- brcmf_err("Failed to send Action Frame(retry %d)\n", tx_retry);
-+ bphy_err(drvr, "Failed to send Action Frame(retry %d)\n",
-+ tx_retry);
- clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status);
- }
-
-@@ -1965,6 +1977,7 @@ int brcmf_p2p_ifchange(struct brcmf_cfg8
- enum brcmf_fil_p2p_if_types if_type)
- {
- struct brcmf_p2p_info *p2p = &cfg->p2p;
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_cfg80211_vif *vif;
- struct brcmf_fil_p2p_if_le if_request;
- s32 err;
-@@ -1974,13 +1987,13 @@ int brcmf_p2p_ifchange(struct brcmf_cfg8
-
- vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif;
- if (!vif) {
-- brcmf_err("vif for P2PAPI_BSSCFG_PRIMARY does not exist\n");
-+ bphy_err(drvr, "vif for P2PAPI_BSSCFG_PRIMARY does not exist\n");
- return -EPERM;
- }
- brcmf_notify_escan_complete(cfg, vif->ifp, true, true);
- vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif;
- if (!vif) {
-- brcmf_err("vif for P2PAPI_BSSCFG_CONNECTION does not exist\n");
-+ bphy_err(drvr, "vif for P2PAPI_BSSCFG_CONNECTION does not exist\n");
- return -EPERM;
- }
- brcmf_set_mpc(vif->ifp, 0);
-@@ -1998,7 +2011,7 @@ int brcmf_p2p_ifchange(struct brcmf_cfg8
- err = brcmf_fil_iovar_data_set(vif->ifp, "p2p_ifupd", &if_request,
- sizeof(if_request));
- if (err) {
-- brcmf_err("p2p_ifupd FAILED, err=%d\n", err);
-+ bphy_err(drvr, "p2p_ifupd FAILED, err=%d\n", err);
- brcmf_cfg80211_arm_vif_event(cfg, NULL);
- return err;
- }
-@@ -2006,7 +2019,7 @@ int brcmf_p2p_ifchange(struct brcmf_cfg8
- BRCMF_VIF_EVENT_TIMEOUT);
- brcmf_cfg80211_arm_vif_event(cfg, NULL);
- if (!err) {
-- brcmf_err("No BRCMF_E_IF_CHANGE event received\n");
-+ bphy_err(drvr, "No BRCMF_E_IF_CHANGE event received\n");
- return -EIO;
- }
-
-@@ -2069,6 +2082,7 @@ static struct wireless_dev *brcmf_p2p_cr
- struct wiphy *wiphy,
- u8 *addr)
- {
-+ struct brcmf_pub *drvr = p2p->cfg->pub;
- struct brcmf_cfg80211_vif *p2p_vif;
- struct brcmf_if *p2p_ifp;
- struct brcmf_if *pri_ifp;
-@@ -2080,7 +2094,7 @@ static struct wireless_dev *brcmf_p2p_cr
-
- p2p_vif = brcmf_alloc_vif(p2p->cfg, NL80211_IFTYPE_P2P_DEVICE);
- if (IS_ERR(p2p_vif)) {
-- brcmf_err("could not create discovery vif\n");
-+ bphy_err(drvr, "could not create discovery vif\n");
- return (struct wireless_dev *)p2p_vif;
- }
-
-@@ -2088,7 +2102,7 @@ static struct wireless_dev *brcmf_p2p_cr
-
- /* firmware requires unique mac address for p2pdev interface */
- if (addr && ether_addr_equal(addr, pri_ifp->mac_addr)) {
-- brcmf_err("discovery vif must be different from primary interface\n");
-+ bphy_err(drvr, "discovery vif must be different from primary interface\n");
- return ERR_PTR(-EINVAL);
- }
-
-@@ -2101,7 +2115,7 @@ static struct wireless_dev *brcmf_p2p_cr
- /* Initialize P2P Discovery in the firmware */
- err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1);
- if (err < 0) {
-- brcmf_err("set p2p_disc error\n");
-+ bphy_err(drvr, "set p2p_disc error\n");
- brcmf_fweh_p2pdev_setup(pri_ifp, false);
- brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL);
- goto fail;
-@@ -2113,7 +2127,7 @@ static struct wireless_dev *brcmf_p2p_cr
- brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL);
- brcmf_fweh_p2pdev_setup(pri_ifp, false);
- if (!err) {
-- brcmf_err("timeout occurred\n");
-+ bphy_err(drvr, "timeout occurred\n");
- err = -EIO;
- goto fail;
- }
-@@ -2127,7 +2141,7 @@ static struct wireless_dev *brcmf_p2p_cr
- /* verify bsscfg index for P2P discovery */
- err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bsscfgidx);
- if (err < 0) {
-- brcmf_err("retrieving discover bsscfg index failed\n");
-+ bphy_err(drvr, "retrieving discover bsscfg index failed\n");
- goto fail;
- }
-
-@@ -2161,6 +2175,7 @@ struct wireless_dev *brcmf_p2p_add_vif(s
- {
- struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_cfg80211_vif *vif;
- enum brcmf_fil_p2p_if_types iftype;
- int err;
-@@ -2201,7 +2216,7 @@ struct wireless_dev *brcmf_p2p_add_vif(s
- BRCMF_VIF_EVENT_TIMEOUT);
- brcmf_cfg80211_arm_vif_event(cfg, NULL);
- if (!err) {
-- brcmf_err("timeout occurred\n");
-+ bphy_err(drvr, "timeout occurred\n");
- err = -EIO;
- goto fail;
- }
-@@ -2209,7 +2224,7 @@ struct wireless_dev *brcmf_p2p_add_vif(s
- /* interface created in firmware */
- ifp = vif->ifp;
- if (!ifp) {
-- brcmf_err("no if pointer provided\n");
-+ bphy_err(drvr, "no if pointer provided\n");
- err = -ENOENT;
- goto fail;
- }
-@@ -2220,7 +2235,7 @@ struct wireless_dev *brcmf_p2p_add_vif(s
- #endif /* >= 3.17.0 */
- err = brcmf_net_attach(ifp, true);
- if (err) {
-- brcmf_err("Registering netdevice failed\n");
-+ bphy_err(drvr, "Registering netdevice failed\n");
- free_netdev(ifp->ndev);
- goto fail;
- }
-@@ -2375,6 +2390,7 @@ void brcmf_p2p_stop_device(struct wiphy
- */
- s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced)
- {
-+ struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_p2p_info *p2p;
- struct brcmf_if *pri_ifp;
- s32 err = 0;
-@@ -2389,7 +2405,7 @@ s32 brcmf_p2p_attach(struct brcmf_cfg802
- if (p2pdev_forced) {
- err_ptr = brcmf_p2p_create_p2pdev(p2p, NULL, NULL);
- if (IS_ERR(err_ptr)) {
-- brcmf_err("P2P device creation failed.\n");
-+ bphy_err(drvr, "P2P device creation failed.\n");
- err = PTR_ERR(err_ptr);
- }
- } else {
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
-@@ -109,6 +109,7 @@ static int brcmf_pno_channel_config(stru
- static int brcmf_pno_config(struct brcmf_if *ifp, u32 scan_freq,
- u32 mscan, u32 bestn)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_pno_param_le pfn_param;
- u16 flags;
- u32 pfnmem;
-@@ -132,13 +133,13 @@ static int brcmf_pno_config(struct brcmf
- /* set bestn in firmware */
- err = brcmf_fil_iovar_int_set(ifp, "pfnmem", pfnmem);
- if (err < 0) {
-- brcmf_err("failed to set pfnmem\n");
-+ bphy_err(drvr, "failed to set pfnmem\n");
- goto exit;
- }
- /* get max mscan which the firmware supports */
- err = brcmf_fil_iovar_int_get(ifp, "pfnmem", &pfnmem);
- if (err < 0) {
-- brcmf_err("failed to get pfnmem\n");
-+ bphy_err(drvr, "failed to get pfnmem\n");
- goto exit;
- }
- mscan = min_t(u32, mscan, pfnmem);
-@@ -152,7 +153,7 @@ static int brcmf_pno_config(struct brcmf
- err = brcmf_fil_iovar_data_set(ifp, "pfn_set", &pfn_param,
- sizeof(pfn_param));
- if (err)
-- brcmf_err("pfn_set failed, err=%d\n", err);
-+ bphy_err(drvr, "pfn_set failed, err=%d\n", err);
-
- exit:
- return err;
-@@ -160,6 +161,7 @@ exit:
-
- static int brcmf_pno_set_random(struct brcmf_if *ifp, struct brcmf_pno_info *pi)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_pno_macaddr_le pfn_mac;
- u8 *mac_addr = NULL;
- u8 *mac_mask = NULL;
-@@ -194,7 +196,7 @@ static int brcmf_pno_set_random(struct b
- err = brcmf_fil_iovar_data_set(ifp, "pfn_macaddr", &pfn_mac,
- sizeof(pfn_mac));
- if (err)
-- brcmf_err("pfn_macaddr failed, err=%d\n", err);
-+ bphy_err(drvr, "pfn_macaddr failed, err=%d\n", err);
-
- return err;
- }
-@@ -202,6 +204,7 @@ static int brcmf_pno_set_random(struct b
- static int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
- bool active)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_pno_net_param_le pfn;
- int err;
-
-@@ -218,12 +221,13 @@ static int brcmf_pno_add_ssid(struct brc
- brcmf_dbg(SCAN, "adding ssid=%.32s (active=%d)\n", ssid->ssid, active);
- err = brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn, sizeof(pfn));
- if (err < 0)
-- brcmf_err("adding failed: err=%d\n", err);
-+ bphy_err(drvr, "adding failed: err=%d\n", err);
- return err;
- }
-
- static int brcmf_pno_add_bssid(struct brcmf_if *ifp, const u8 *bssid)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_pno_bssid_le bssid_cfg;
- int err;
-
-@@ -234,7 +238,7 @@ static int brcmf_pno_add_bssid(struct br
- err = brcmf_fil_iovar_data_set(ifp, "pfn_add_bssid", &bssid_cfg,
- sizeof(bssid_cfg));
- if (err < 0)
-- brcmf_err("adding failed: err=%d\n", err);
-+ bphy_err(drvr, "adding failed: err=%d\n", err);
- return err;
- }
-
-@@ -258,6 +262,7 @@ static bool brcmf_is_ssid_active(struct
-
- static int brcmf_pno_clean(struct brcmf_if *ifp)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- int ret;
-
- /* Disable pfn */
-@@ -267,7 +272,7 @@ static int brcmf_pno_clean(struct brcmf_
- ret = brcmf_fil_iovar_data_set(ifp, "pfnclear", NULL, 0);
- }
- if (ret < 0)
-- brcmf_err("failed code %d\n", ret);
-+ bphy_err(drvr, "failed code %d\n", ret);
-
- return ret;
- }
-@@ -392,6 +397,7 @@ static int brcmf_pno_config_networks(str
-
- static int brcmf_pno_config_sched_scans(struct brcmf_if *ifp)
- {
-+ struct brcmf_pub *drvr = ifp->drvr;
- struct brcmf_pno_info *pi;
- struct brcmf_gscan_config *gscan_cfg;
- struct brcmf_gscan_bucket_config *buckets;
-@@ -416,7 +422,7 @@ static int brcmf_pno_config_sched_scans(
- /* clean up everything */
- err = brcmf_pno_clean(ifp);
- if (err < 0) {
-- brcmf_err("failed error=%d\n", err);
-+ bphy_err(drvr, "failed error=%d\n", err);
- goto free_gscan;
- }
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.c
-@@ -47,8 +47,8 @@ int brcmf_proto_attach(struct brcmf_pub
- if (brcmf_proto_msgbuf_attach(drvr))
- goto fail;
- } else {
-- brcmf_err("Unsupported proto type %d\n",
-- drvr->bus_if->proto_type);
-+ bphy_err(drvr, "Unsupported proto type %d\n",
-+ drvr->bus_if->proto_type);
- goto fail;
- }
- if (!proto->tx_queue_data || (proto->hdrpull == NULL) ||
-@@ -56,7 +56,7 @@ int brcmf_proto_attach(struct brcmf_pub
- (proto->configure_addr_mode == NULL) ||
- (proto->delete_peer == NULL) || (proto->add_tdls_peer == NULL) ||
- (proto->debugfs_create == NULL)) {
-- brcmf_err("Not all proto handlers have been installed\n");
-+ bphy_err(drvr, "Not all proto handlers have been installed\n");
- goto fail;
- }
- return 0;
diff --git a/package/kernel/mac80211/patches/brcm/355-v5.1-brcmfmac-add-basic-validation-of-shared-RAM-address.patch b/package/kernel/mac80211/patches/brcm/355-v5.1-brcmfmac-add-basic-validation-of-shared-RAM-address.patch
deleted file mode 100644
index 323e93354c..0000000000
--- a/package/kernel/mac80211/patches/brcm/355-v5.1-brcmfmac-add-basic-validation-of-shared-RAM-address.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From e0a8ef4d7b4315bc4c1641fb3f3a7dfdfa6627b8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 20 Feb 2019 11:30:47 +0100
-Subject: [PATCH] brcmfmac: add basic validation of shared RAM address
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-While experimenting with firmware loading I ended up in a state of
-firmware reporting shared RAM address 0x04000001. It was causing:
-[ 94.448015] Unable to handle kernel paging request at virtual address cd680001
-due to reading out of the mapped memory.
-
-This patch adds some basic validation to avoid kernel crashes due to the
-unexpected firmware behavior.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -1560,6 +1560,12 @@ static int brcmf_pcie_download_fw_nvram(
- brcmf_err(bus, "FW failed to initialize\n");
- return -ENODEV;
- }
-+ if (sharedram_addr < devinfo->ci->rambase ||
-+ sharedram_addr >= devinfo->ci->rambase + devinfo->ci->ramsize) {
-+ brcmf_err(bus, "Invalid shared RAM address 0x%08x\n",
-+ sharedram_addr);
-+ return -ENODEV;
-+ }
- brcmf_dbg(PCIE, "Shared RAM addr: 0x%08x\n", sharedram_addr);
-
- return (brcmf_pcie_init_share_ram_info(devinfo, sharedram_addr));
diff --git a/package/kernel/mac80211/patches/brcm/356-v5.1-0001-brcmfmac-fix-size-of-the-struct-msgbuf_ring_status.patch b/package/kernel/mac80211/patches/brcm/356-v5.1-0001-brcmfmac-fix-size-of-the-struct-msgbuf_ring_status.patch
deleted file mode 100644
index 10834db608..0000000000
--- a/package/kernel/mac80211/patches/brcm/356-v5.1-0001-brcmfmac-fix-size-of-the-struct-msgbuf_ring_status.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 0c7051610c577b60b01b3b5aec14d6765e177b0d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 21 Feb 2019 11:33:24 +0100
-Subject: [PATCH] brcmfmac: fix size of the struct msgbuf_ring_status
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This updates host struct to match the in-firmawre definition. It's a
-cosmetic change as it only applies to the reserved struct space.
-
-Fixes: c988b78244df ("brcmfmac: print firmware reported ring status errors")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-@@ -139,7 +139,7 @@ struct msgbuf_ring_status {
- struct msgbuf_common_hdr msg;
- struct msgbuf_completion_hdr compl_hdr;
- __le16 write_idx;
-- __le32 rsvd0[5];
-+ __le16 rsvd0[5];
- };
-
- struct msgbuf_rx_event {
diff --git a/package/kernel/mac80211/patches/brcm/356-v5.1-0002-brcmfmac-print-firmware-reported-general-status-erro.patch b/package/kernel/mac80211/patches/brcm/356-v5.1-0002-brcmfmac-print-firmware-reported-general-status-erro.patch
deleted file mode 100644
index 313d501e82..0000000000
--- a/package/kernel/mac80211/patches/brcm/356-v5.1-0002-brcmfmac-print-firmware-reported-general-status-erro.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From c91377495192cda096e52dc09c266b0d05f16d86 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 21 Feb 2019 11:33:25 +0100
-Subject: [PATCH] brcmfmac: print firmware reported general status errors
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Firmware may report general errors using a special message type. Add
-basic support for it by simply decoding & printing an error number.
-
-A sample situation in which firmware reports a buf error:
-CONSOLE: 027084.733 no host response IOCTL buffer available..so fail the request
-will now produce a "Firmware reported general error: 9" on the host.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/msgbuf.c | 24 +++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-@@ -134,6 +134,14 @@ struct msgbuf_completion_hdr {
- __le16 flow_ring_id;
- };
-
-+/* Data struct for the MSGBUF_TYPE_GEN_STATUS */
-+struct msgbuf_gen_status {
-+ struct msgbuf_common_hdr msg;
-+ struct msgbuf_completion_hdr compl_hdr;
-+ __le16 write_idx;
-+ __le32 rsvd0[3];
-+};
-+
- /* Data struct for the MSGBUF_TYPE_RING_STATUS */
- struct msgbuf_ring_status {
- struct msgbuf_common_hdr msg;
-@@ -1194,6 +1202,18 @@ brcmf_msgbuf_process_rx_complete(struct
- brcmf_netif_rx(ifp, skb);
- }
-
-+static void brcmf_msgbuf_process_gen_status(struct brcmf_msgbuf *msgbuf,
-+ void *buf)
-+{
-+ struct msgbuf_gen_status *gen_status = buf;
-+ struct brcmf_pub *drvr = msgbuf->drvr;
-+ int err;
-+
-+ err = le16_to_cpu(gen_status->compl_hdr.status);
-+ if (err)
-+ bphy_err(drvr, "Firmware reported general error: %d\n", err);
-+}
-+
- static void brcmf_msgbuf_process_ring_status(struct brcmf_msgbuf *msgbuf,
- void *buf)
- {
-@@ -1273,6 +1293,10 @@ static void brcmf_msgbuf_process_msgtype
-
- msg = (struct msgbuf_common_hdr *)buf;
- switch (msg->msgtype) {
-+ case MSGBUF_TYPE_GEN_STATUS:
-+ brcmf_dbg(MSGBUF, "MSGBUF_TYPE_GEN_STATUS\n");
-+ brcmf_msgbuf_process_gen_status(msgbuf, buf);
-+ break;
- case MSGBUF_TYPE_RING_STATUS:
- brcmf_dbg(MSGBUF, "MSGBUF_TYPE_RING_STATUS\n");
- brcmf_msgbuf_process_ring_status(msgbuf, buf);
diff --git a/package/kernel/mac80211/patches/brcm/360-v5.2-0001-brcmfmac-support-repeated-brcmf_fw_alloc_request-cal.patch b/package/kernel/mac80211/patches/brcm/360-v5.2-0001-brcmfmac-support-repeated-brcmf_fw_alloc_request-cal.patch
deleted file mode 100644
index ef694f079f..0000000000
--- a/package/kernel/mac80211/patches/brcm/360-v5.2-0001-brcmfmac-support-repeated-brcmf_fw_alloc_request-cal.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From c9692820710f57c826b2e43a6fb1e4cd307508b0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 26 Feb 2019 14:11:16 +0100
-Subject: [PATCH] brcmfmac: support repeated brcmf_fw_alloc_request() calls
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-During a normal brcmfmac lifetime brcmf_fw_alloc_request() is called
-once only during the probe. It's safe to assume provided array is clear.
-
-Further brcmfmac improvements may require calling it multiple times
-though. This patch allows it by fixing invalid firmware paths like:
-brcm/brcmfmac4366c-pcie.binbrcm/brcmfmac4366c-pcie.bin
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -743,6 +743,7 @@ brcmf_fw_alloc_request(u32 chip, u32 chi
-
- for (j = 0; j < n_fwnames; j++) {
- fwreq->items[j].path = fwnames[j].path;
-+ fwnames[j].path[0] = '\0';
- /* check if firmware path is provided by module parameter */
- if (brcmf_mp_global.firmware_path[0] != '\0') {
- strlcpy(fwnames[j].path, mp_path,
diff --git a/package/kernel/mac80211/patches/brcm/360-v5.2-0002-brcmfmac-add-a-function-designated-for-handling-firm.patch b/package/kernel/mac80211/patches/brcm/360-v5.2-0002-brcmfmac-add-a-function-designated-for-handling-firm.patch
deleted file mode 100644
index 595b8948c7..0000000000
--- a/package/kernel/mac80211/patches/brcm/360-v5.2-0002-brcmfmac-add-a-function-designated-for-handling-firm.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From a2ec87ddbf1637f854ffcfff9d12d392fa30758b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 26 Feb 2019 14:11:18 +0100
-Subject: [PATCH] brcmfmac: add a function designated for handling firmware
- fails
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This improves handling PCIe firmware halts by printing a clear error
-message and replaces a similar code in the SDIO bus support.
-
-It will also allow further improvements like trying to recover from a
-firmware crash.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 2 ++
- .../net/wireless/broadcom/brcm80211/brcmfmac/core.c | 10 ++++++++++
- .../net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 2 +-
- .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++--
- 4 files changed, 15 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-@@ -262,6 +262,8 @@ void brcmf_detach(struct device *dev);
- void brcmf_dev_reset(struct device *dev);
- /* Request from bus module to initiate a coredump */
- void brcmf_dev_coredump(struct device *dev);
-+/* Indication that firmware has halted or crashed */
-+void brcmf_fw_crashed(struct device *dev);
-
- /* Configure the "global" bus state used by upper layers */
- void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1294,6 +1294,16 @@ void brcmf_dev_coredump(struct device *d
- brcmf_dbg(TRACE, "failed to create coredump\n");
- }
-
-+void brcmf_fw_crashed(struct device *dev)
-+{
-+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-+ struct brcmf_pub *drvr = bus_if->drvr;
-+
-+ bphy_err(drvr, "Firmware has halted or crashed\n");
-+
-+ brcmf_dev_coredump(dev);
-+}
-+
- void brcmf_detach(struct device *dev)
- {
- s32 i;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -730,7 +730,7 @@ static void brcmf_pcie_handle_mb_data(st
- }
- if (dtoh_mb_data & BRCMF_D2H_DEV_FWHALT) {
- brcmf_dbg(PCIE, "D2H_MB_DATA: FW HALT\n");
-- brcmf_dev_coredump(&devinfo->pdev->dev);
-+ brcmf_fw_crashed(&devinfo->pdev->dev);
- }
- }
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -1090,8 +1090,8 @@ static u32 brcmf_sdio_hostmail(struct br
-
- /* dongle indicates the firmware has halted/crashed */
- if (hmb_data & HMB_DATA_FWHALT) {
-- brcmf_err("mailbox indicates firmware halted\n");
-- brcmf_dev_coredump(&sdiod->func1->dev);
-+ brcmf_dbg(SDIO, "mailbox indicates firmware halted\n");
-+ brcmf_fw_crashed(&sdiod->func1->dev);
- }
-
- /* Dongle recomposed rx frames, accept them again */
diff --git a/package/kernel/mac80211/patches/brcm/360-v5.2-0003-brcmfmac-reset-PCIe-bus-on-a-firmware-crash.patch b/package/kernel/mac80211/patches/brcm/360-v5.2-0003-brcmfmac-reset-PCIe-bus-on-a-firmware-crash.patch
deleted file mode 100644
index 5617d141b3..0000000000
--- a/package/kernel/mac80211/patches/brcm/360-v5.2-0003-brcmfmac-reset-PCIe-bus-on-a-firmware-crash.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From 4684997d9eea29380000e062755aa6d368d789a3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 26 Feb 2019 14:11:19 +0100
-Subject: [PATCH] brcmfmac: reset PCIe bus on a firmware crash
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This includes bus reset & reloading a firmware. It should be sufficient
-for a user space to (setup and) use a wireless device again.
-
-Support for reset on USB & SDIO can be added later.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/bus.h | 10 ++++++
- .../broadcom/brcm80211/brcmfmac/core.c | 12 +++++++
- .../broadcom/brcm80211/brcmfmac/core.h | 2 ++
- .../broadcom/brcm80211/brcmfmac/pcie.c | 35 +++++++++++++++++++
- 4 files changed, 59 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-@@ -91,6 +91,7 @@ struct brcmf_bus_ops {
- int (*get_fwname)(struct device *dev, const char *ext,
- unsigned char *fw_name);
- void (*debugfs_create)(struct device *dev);
-+ int (*reset)(struct device *dev);
- };
-
-
-@@ -245,6 +246,15 @@ void brcmf_bus_debugfs_create(struct brc
- return bus->ops->debugfs_create(bus->dev);
- }
-
-+static inline
-+int brcmf_bus_reset(struct brcmf_bus *bus)
-+{
-+ if (!bus->ops->reset)
-+ return -EOPNOTSUPP;
-+
-+ return bus->ops->reset(bus->dev);
-+}
-+
- /*
- * interface functions from common layer
- */
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1105,6 +1105,14 @@ static int brcmf_revinfo_read(struct seq
- return 0;
- }
-
-+static void brcmf_core_bus_reset(struct work_struct *work)
-+{
-+ struct brcmf_pub *drvr = container_of(work, struct brcmf_pub,
-+ bus_reset);
-+
-+ brcmf_bus_reset(drvr->bus_if);
-+}
-+
- static int brcmf_bus_started(struct brcmf_pub *drvr, struct cfg80211_ops *ops)
- {
- int ret = -1;
-@@ -1176,6 +1184,8 @@ static int brcmf_bus_started(struct brcm
- #endif
- #endif /* CONFIG_INET */
-
-+ INIT_WORK(&drvr->bus_reset, brcmf_core_bus_reset);
-+
- /* populate debugfs */
- brcmf_debugfs_add_entry(drvr, "revinfo", brcmf_revinfo_read);
- brcmf_feat_debugfs_create(drvr);
-@@ -1302,6 +1312,8 @@ void brcmf_fw_crashed(struct device *dev
- bphy_err(drvr, "Firmware has halted or crashed\n");
-
- brcmf_dev_coredump(dev);
-+
-+ schedule_work(&drvr->bus_reset);
- }
-
- void brcmf_detach(struct device *dev)
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
-@@ -143,6 +143,8 @@ struct brcmf_pub {
- struct notifier_block inet6addr_notifier;
- struct brcmf_mp_device *settings;
-
-+ struct work_struct bus_reset;
-+
- u8 clmver[BRCMF_DCMD_SMLEN];
- };
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -345,6 +345,10 @@ static const u32 brcmf_ring_itemsize[BRC
- BRCMF_D2H_MSGRING_RX_COMPLETE_ITEMSIZE
- };
-
-+static void brcmf_pcie_setup(struct device *dev, int ret,
-+ struct brcmf_fw_request *fwreq);
-+static struct brcmf_fw_request *
-+brcmf_pcie_prepare_fw_request(struct brcmf_pciedev_info *devinfo);
-
- static u32
- brcmf_pcie_read_reg32(struct brcmf_pciedev_info *devinfo, u32 reg_offset)
-@@ -1409,6 +1413,36 @@ int brcmf_pcie_get_fwname(struct device
- return 0;
- }
-
-+static int brcmf_pcie_reset(struct device *dev)
-+{
-+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-+ struct brcmf_pciedev *buspub = bus_if->bus_priv.pcie;
-+ struct brcmf_pciedev_info *devinfo = buspub->devinfo;
-+ struct brcmf_fw_request *fwreq;
-+ int err;
-+
-+ brcmf_detach(dev);
-+
-+ brcmf_pcie_release_irq(devinfo);
-+ brcmf_pcie_release_scratchbuffers(devinfo);
-+ brcmf_pcie_release_ringbuffers(devinfo);
-+ brcmf_pcie_reset_device(devinfo);
-+
-+ fwreq = brcmf_pcie_prepare_fw_request(devinfo);
-+ if (!fwreq) {
-+ dev_err(dev, "Failed to prepare FW request\n");
-+ return -ENOMEM;
-+ }
-+
-+ err = brcmf_fw_get_firmwares(dev, fwreq, brcmf_pcie_setup);
-+ if (err) {
-+ dev_err(dev, "Failed to prepare FW request\n");
-+ kfree(fwreq);
-+ }
-+
-+ return err;
-+}
-+
- static const struct brcmf_bus_ops brcmf_pcie_bus_ops = {
- .txdata = brcmf_pcie_tx,
- .stop = brcmf_pcie_down,
-@@ -1418,6 +1452,7 @@ static const struct brcmf_bus_ops brcmf_
- .get_ramsize = brcmf_pcie_get_ramsize,
- .get_memdump = brcmf_pcie_get_memdump,
- .get_fwname = brcmf_pcie_get_fwname,
-+ .reset = brcmf_pcie_reset,
- };
-
-
diff --git a/package/kernel/mac80211/patches/brcm/361-v5.2-0001-brcmfmac-fix-WARNING-during-USB-disconnect-in-case-o.patch b/package/kernel/mac80211/patches/brcm/361-v5.2-0001-brcmfmac-fix-WARNING-during-USB-disconnect-in-case-o.patch
deleted file mode 100644
index cb4b5c924f..0000000000
--- a/package/kernel/mac80211/patches/brcm/361-v5.2-0001-brcmfmac-fix-WARNING-during-USB-disconnect-in-case-o.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From c80d26e81ef1802f30364b4ad1955c1443a592b9 Mon Sep 17 00:00:00 2001
-From: Piotr Figiel <p.figiel@camlintechnologies.com>
-Date: Mon, 4 Mar 2019 15:42:49 +0000
-Subject: [PATCH] brcmfmac: fix WARNING during USB disconnect in case of
- unempty psq
-
-brcmu_pkt_buf_free_skb emits WARNING when attempting to free a sk_buff
-which is part of any queue. After USB disconnect this may have happened
-when brcmf_fws_hanger_cleanup() is called as per-interface psq was never
-cleaned when removing the interface.
-Change brcmf_fws_macdesc_cleanup() in a way that it removes the
-corresponding packets from hanger table (to avoid double-free when
-brcmf_fws_hanger_cleanup() is called) and add a call to clean-up the
-interface specific packet queue.
-
-Below is a WARNING during USB disconnect with Raspberry Pi WiFi dongle
-running in AP mode. This was reproducible when the interface was
-transmitting during the disconnect and is fixed with this commit.
-
-------------[ cut here ]------------
-WARNING: CPU: 0 PID: 1171 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x3c/0x40
-Modules linked in: nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether cdc_acm smsc95xx usbnet ci_hdrc_imx ci_hdrc ulpi usbmisc_imx 8250_exar 8250_pci 8250 8250_base libcomposite configfs udc_core
-CPU: 0 PID: 1171 Comm: kworker/0:0 Not tainted 4.19.23-00075-gde33ed8 #99
-Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
-Workqueue: usb_hub_wq hub_event
-[<8010ff84>] (unwind_backtrace) from [<8010bb64>] (show_stack+0x10/0x14)
-[<8010bb64>] (show_stack) from [<80840278>] (dump_stack+0x88/0x9c)
-[<80840278>] (dump_stack) from [<8011f5ec>] (__warn+0xfc/0x114)
-[<8011f5ec>] (__warn) from [<8011f71c>] (warn_slowpath_null+0x40/0x48)
-[<8011f71c>] (warn_slowpath_null) from [<805a476c>] (brcmu_pkt_buf_free_skb+0x3c/0x40)
-[<805a476c>] (brcmu_pkt_buf_free_skb) from [<805bb6c4>] (brcmf_fws_cleanup+0x1e4/0x22c)
-[<805bb6c4>] (brcmf_fws_cleanup) from [<805bc854>] (brcmf_fws_del_interface+0x58/0x68)
-[<805bc854>] (brcmf_fws_del_interface) from [<805b66ac>] (brcmf_remove_interface+0x40/0x150)
-[<805b66ac>] (brcmf_remove_interface) from [<805b6870>] (brcmf_detach+0x6c/0xb0)
-[<805b6870>] (brcmf_detach) from [<805bdbb8>] (brcmf_usb_disconnect+0x30/0x4c)
-[<805bdbb8>] (brcmf_usb_disconnect) from [<805e5d64>] (usb_unbind_interface+0x5c/0x1e0)
-[<805e5d64>] (usb_unbind_interface) from [<804aab10>] (device_release_driver_internal+0x154/0x1ec)
-[<804aab10>] (device_release_driver_internal) from [<804a97f4>] (bus_remove_device+0xcc/0xf8)
-[<804a97f4>] (bus_remove_device) from [<804a6fc0>] (device_del+0x118/0x308)
-[<804a6fc0>] (device_del) from [<805e488c>] (usb_disable_device+0xa0/0x1c8)
-[<805e488c>] (usb_disable_device) from [<805dcf98>] (usb_disconnect+0x70/0x1d8)
-[<805dcf98>] (usb_disconnect) from [<805ddd84>] (hub_event+0x464/0xf50)
-[<805ddd84>] (hub_event) from [<80135a70>] (process_one_work+0x138/0x3f8)
-[<80135a70>] (process_one_work) from [<80135d5c>] (worker_thread+0x2c/0x554)
-[<80135d5c>] (worker_thread) from [<8013b1a0>] (kthread+0x124/0x154)
-[<8013b1a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c)
-Exception stack(0xecf8dfb0 to 0xecf8dff8)
-dfa0: 00000000 00000000 00000000 00000000
-dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
----[ end trace 38d234018e9e2a90 ]---
-------------[ cut here ]------------
-
-Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/fwsignal.c | 42 +++++++++++--------
- 1 file changed, 24 insertions(+), 18 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
-@@ -580,24 +580,6 @@ static bool brcmf_fws_ifidx_match(struct
- return ifidx == *(int *)arg;
- }
-
--static void brcmf_fws_psq_flush(struct brcmf_fws_info *fws, struct pktq *q,
-- int ifidx)
--{
-- bool (*matchfn)(struct sk_buff *, void *) = NULL;
-- struct sk_buff *skb;
-- int prec;
--
-- if (ifidx != -1)
-- matchfn = brcmf_fws_ifidx_match;
-- for (prec = 0; prec < q->num_prec; prec++) {
-- skb = brcmu_pktq_pdeq_match(q, prec, matchfn, &ifidx);
-- while (skb) {
-- brcmu_pkt_buf_free_skb(skb);
-- skb = brcmu_pktq_pdeq_match(q, prec, matchfn, &ifidx);
-- }
-- }
--}
--
- static void brcmf_fws_hanger_init(struct brcmf_fws_hanger *hanger)
- {
- int i;
-@@ -669,6 +651,28 @@ static inline int brcmf_fws_hanger_poppk
- return 0;
- }
-
-+static void brcmf_fws_psq_flush(struct brcmf_fws_info *fws, struct pktq *q,
-+ int ifidx)
-+{
-+ bool (*matchfn)(struct sk_buff *, void *) = NULL;
-+ struct sk_buff *skb;
-+ int prec;
-+ u32 hslot;
-+
-+ if (ifidx != -1)
-+ matchfn = brcmf_fws_ifidx_match;
-+ for (prec = 0; prec < q->num_prec; prec++) {
-+ skb = brcmu_pktq_pdeq_match(q, prec, matchfn, &ifidx);
-+ while (skb) {
-+ hslot = brcmf_skb_htod_tag_get_field(skb, HSLOT);
-+ brcmf_fws_hanger_poppkt(&fws->hanger, hslot, &skb,
-+ true);
-+ brcmu_pkt_buf_free_skb(skb);
-+ skb = brcmu_pktq_pdeq_match(q, prec, matchfn, &ifidx);
-+ }
-+ }
-+}
-+
- static int brcmf_fws_hanger_mark_suppressed(struct brcmf_fws_hanger *h,
- u32 slot_id)
- {
-@@ -2200,6 +2204,8 @@ void brcmf_fws_del_interface(struct brcm
- brcmf_fws_lock(fws);
- ifp->fws_desc = NULL;
- brcmf_dbg(TRACE, "deleting %s\n", entry->name);
-+ brcmf_fws_macdesc_cleanup(fws, &fws->desc.iface[ifp->ifidx],
-+ ifp->ifidx);
- brcmf_fws_macdesc_deinit(entry);
- brcmf_fws_cleanup(fws, ifp->ifidx);
- brcmf_fws_unlock(fws);
diff --git a/package/kernel/mac80211/patches/brcm/361-v5.2-0002-brcmfmac-fix-NULL-pointer-derefence-during-USB-disco.patch b/package/kernel/mac80211/patches/brcm/361-v5.2-0002-brcmfmac-fix-NULL-pointer-derefence-during-USB-disco.patch
deleted file mode 100644
index e45288b63b..0000000000
--- a/package/kernel/mac80211/patches/brcm/361-v5.2-0002-brcmfmac-fix-NULL-pointer-derefence-during-USB-disco.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From 5cdb0ef6144f47440850553579aa923c20a63f23 Mon Sep 17 00:00:00 2001
-From: Piotr Figiel <p.figiel@camlintechnologies.com>
-Date: Mon, 4 Mar 2019 15:42:52 +0000
-Subject: [PATCH] brcmfmac: fix NULL pointer derefence during USB disconnect
-
-In case USB disconnect happens at the moment transmitting workqueue is in
-progress the underlying interface may be gone causing a NULL pointer
-dereference. Add synchronization of the workqueue destruction with the
-detach implementation in core so that the transmitting workqueue is stopped
-during detach before the interfaces are removed.
-
-Fix following Oops:
-
-Unable to handle kernel NULL pointer dereference at virtual address 00000008
-pgd = 9e6a802d
-[00000008] *pgd=00000000
-Internal error: Oops: 5 [#1] PREEMPT SMP ARM
-Modules linked in: nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle
-xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
-iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether
-usb_serial_simple usbserial cdc_acm brcmfmac brcmutil smsc95xx usbnet
-ci_hdrc_imx ci_hdrc ulpi usbmisc_imx 8250_exar 8250_pci 8250 8250_base
-libcomposite configfs udc_core
-CPU: 0 PID: 7 Comm: kworker/u8:0 Not tainted 4.19.23-00076-g03740aa-dirty #102
-Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
-Workqueue: brcmf_fws_wq brcmf_fws_dequeue_worker [brcmfmac]
-PC is at brcmf_txfinalize+0x34/0x90 [brcmfmac]
-LR is at brcmf_fws_dequeue_worker+0x218/0x33c [brcmfmac]
-pc : [<7f0dee64>] lr : [<7f0e4140>] psr: 60010093
-sp : ee8abef0 ip : 00000000 fp : edf38000
-r10: ffffffed r9 : edf38970 r8 : edf38004
-r7 : edf3e970 r6 : 00000000 r5 : ede69000 r4 : 00000000
-r3 : 00000a97 r2 : 00000000 r1 : 0000888e r0 : ede69000
-Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
-Control: 10c5387d Table: 7d03c04a DAC: 00000051
-Process kworker/u8:0 (pid: 7, stack limit = 0x24ec3e04)
-Stack: (0xee8abef0 to 0xee8ac000)
-bee0: ede69000 00000000 ed56c3e0 7f0e4140
-bf00: 00000001 00000000 edf38004 edf3e99c ed56c3e0 80d03d00 edfea43a edf3e970
-bf20: ee809880 ee804200 ee971100 00000000 edf3e974 00000000 ee804200 80135a70
-bf40: 80d03d00 ee804218 ee809880 ee809894 ee804200 80d03d00 ee804218 ee8aa000
-bf60: 00000088 80135d5c 00000000 ee829f00 ee829dc0 00000000 ee809880 80135d30
-bf80: ee829f1c ee873eac 00000000 8013b1a0 ee829dc0 8013b07c 00000000 00000000
-bfa0: 00000000 00000000 00000000 801010e8 00000000 00000000 00000000 00000000
-bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
-[<7f0dee64>] (brcmf_txfinalize [brcmfmac]) from [<7f0e4140>] (brcmf_fws_dequeue_worker+0x218/0x33c [brcmfmac])
-[<7f0e4140>] (brcmf_fws_dequeue_worker [brcmfmac]) from [<80135a70>] (process_one_work+0x138/0x3f8)
-[<80135a70>] (process_one_work) from [<80135d5c>] (worker_thread+0x2c/0x554)
-[<80135d5c>] (worker_thread) from [<8013b1a0>] (kthread+0x124/0x154)
-[<8013b1a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c)
-Exception stack(0xee8abfb0 to 0xee8abff8)
-bfa0: 00000000 00000000 00000000 00000000
-bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
-Code: e1530001 0a000007 e3560000 e1a00005 (05942008)
----[ end trace 079239dd31c86e90 ]---
-
-Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 11 +++++++++--
- .../wireless/broadcom/brcm80211/brcmfmac/bcdc.h | 6 ++++--
- .../wireless/broadcom/brcm80211/brcmfmac/core.c | 4 +++-
- .../broadcom/brcm80211/brcmfmac/fwsignal.c | 16 ++++++++++++----
- .../broadcom/brcm80211/brcmfmac/fwsignal.h | 3 ++-
- .../wireless/broadcom/brcm80211/brcmfmac/proto.c | 10 ++++++++--
- .../wireless/broadcom/brcm80211/brcmfmac/proto.h | 3 ++-
- 7 files changed, 40 insertions(+), 13 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
-@@ -490,11 +490,18 @@ fail:
- return -ENOMEM;
- }
-
--void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr)
-+void brcmf_proto_bcdc_detach_pre_delif(struct brcmf_pub *drvr)
-+{
-+ struct brcmf_bcdc *bcdc = drvr->proto->pd;
-+
-+ brcmf_fws_detach_pre_delif(bcdc->fws);
-+}
-+
-+void brcmf_proto_bcdc_detach_post_delif(struct brcmf_pub *drvr)
- {
- struct brcmf_bcdc *bcdc = drvr->proto->pd;
-
- drvr->proto->pd = NULL;
-- brcmf_fws_detach(bcdc->fws);
-+ brcmf_fws_detach_post_delif(bcdc->fws);
- kfree(bcdc);
- }
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
-@@ -18,14 +18,16 @@
-
- #ifdef CPTCFG_BRCMFMAC_PROTO_BCDC
- int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
--void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
-+void brcmf_proto_bcdc_detach_pre_delif(struct brcmf_pub *drvr);
-+void brcmf_proto_bcdc_detach_post_delif(struct brcmf_pub *drvr);
- void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state);
- void brcmf_proto_bcdc_txcomplete(struct device *dev, struct sk_buff *txp,
- bool success);
- struct brcmf_fws_info *drvr_to_fws(struct brcmf_pub *drvr);
- #else
- static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; }
--static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
-+static void brcmf_proto_bcdc_detach_pre_delif(struct brcmf_pub *drvr) {};
-+static inline void brcmf_proto_bcdc_detach_post_delif(struct brcmf_pub *drvr) {}
- #endif
-
- #endif /* BRCMFMAC_BCDC_H */
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1342,6 +1342,8 @@ void brcmf_detach(struct device *dev)
-
- brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN);
-
-+ brcmf_proto_detach_pre_delif(drvr);
-+
- /* make sure primary interface removed last */
- for (i = BRCMF_MAX_IFS-1; i > -1; i--)
- brcmf_remove_interface(drvr->iflist[i], false);
-@@ -1351,7 +1353,7 @@ void brcmf_detach(struct device *dev)
-
- brcmf_bus_stop(drvr->bus_if);
-
-- brcmf_proto_detach(drvr);
-+ brcmf_proto_detach_post_delif(drvr);
-
- bus_if->drvr = NULL;
- wiphy_free(drvr->wiphy);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
-@@ -2443,17 +2443,25 @@ struct brcmf_fws_info *brcmf_fws_attach(
- return fws;
-
- fail:
-- brcmf_fws_detach(fws);
-+ brcmf_fws_detach_pre_delif(fws);
-+ brcmf_fws_detach_post_delif(fws);
- return ERR_PTR(rc);
- }
-
--void brcmf_fws_detach(struct brcmf_fws_info *fws)
-+void brcmf_fws_detach_pre_delif(struct brcmf_fws_info *fws)
- {
- if (!fws)
- return;
--
-- if (fws->fws_wq)
-+ if (fws->fws_wq) {
- destroy_workqueue(fws->fws_wq);
-+ fws->fws_wq = NULL;
-+ }
-+}
-+
-+void brcmf_fws_detach_post_delif(struct brcmf_fws_info *fws)
-+{
-+ if (!fws)
-+ return;
-
- /* cleanup */
- brcmf_fws_lock(fws);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.h
-@@ -19,7 +19,8 @@
- #define FWSIGNAL_H_
-
- struct brcmf_fws_info *brcmf_fws_attach(struct brcmf_pub *drvr);
--void brcmf_fws_detach(struct brcmf_fws_info *fws);
-+void brcmf_fws_detach_pre_delif(struct brcmf_fws_info *fws);
-+void brcmf_fws_detach_post_delif(struct brcmf_fws_info *fws);
- void brcmf_fws_debugfs_create(struct brcmf_pub *drvr);
- bool brcmf_fws_queue_skbs(struct brcmf_fws_info *fws);
- bool brcmf_fws_fc_active(struct brcmf_fws_info *fws);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.c
-@@ -67,16 +67,22 @@ fail:
- return -ENOMEM;
- }
-
--void brcmf_proto_detach(struct brcmf_pub *drvr)
-+void brcmf_proto_detach_post_delif(struct brcmf_pub *drvr)
- {
- brcmf_dbg(TRACE, "Enter\n");
-
- if (drvr->proto) {
- if (drvr->bus_if->proto_type == BRCMF_PROTO_BCDC)
-- brcmf_proto_bcdc_detach(drvr);
-+ brcmf_proto_bcdc_detach_post_delif(drvr);
- else if (drvr->bus_if->proto_type == BRCMF_PROTO_MSGBUF)
- brcmf_proto_msgbuf_detach(drvr);
- kfree(drvr->proto);
- drvr->proto = NULL;
- }
- }
-+
-+void brcmf_proto_detach_pre_delif(struct brcmf_pub *drvr)
-+{
-+ if (drvr->proto && drvr->bus_if->proto_type == BRCMF_PROTO_BCDC)
-+ brcmf_proto_bcdc_detach_pre_delif(drvr);
-+}
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
-@@ -54,7 +54,8 @@ struct brcmf_proto {
-
-
- int brcmf_proto_attach(struct brcmf_pub *drvr);
--void brcmf_proto_detach(struct brcmf_pub *drvr);
-+void brcmf_proto_detach_pre_delif(struct brcmf_pub *drvr);
-+void brcmf_proto_detach_post_delif(struct brcmf_pub *drvr);
-
- static inline int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws,
- struct sk_buff *skb,
diff --git a/package/kernel/mac80211/patches/brcm/362-v5.2-0001-brcmfmac-fix-race-during-disconnect-when-USB-complet.patch b/package/kernel/mac80211/patches/brcm/362-v5.2-0001-brcmfmac-fix-race-during-disconnect-when-USB-complet.patch
deleted file mode 100644
index b6a11d6793..0000000000
--- a/package/kernel/mac80211/patches/brcm/362-v5.2-0001-brcmfmac-fix-race-during-disconnect-when-USB-complet.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From db3b9e2e1d58080d0754bdf9293dabf8c6491b67 Mon Sep 17 00:00:00 2001
-From: Piotr Figiel <p.figiel@camlintechnologies.com>
-Date: Fri, 8 Mar 2019 15:25:04 +0000
-Subject: [PATCH] brcmfmac: fix race during disconnect when USB completion is
- in progress
-
-It was observed that rarely during USB disconnect happening shortly after
-connect (before full initialization completes) usb_hub_wq would wait
-forever for the dev_init_lock to be unlocked. dev_init_lock would remain
-locked though because of infinite wait during usb_kill_urb:
-
-[ 2730.656472] kworker/0:2 D 0 260 2 0x00000000
-[ 2730.660700] Workqueue: events request_firmware_work_func
-[ 2730.664807] [<809dca20>] (__schedule) from [<809dd164>] (schedule+0x4c/0xac)
-[ 2730.670587] [<809dd164>] (schedule) from [<8069af44>] (usb_kill_urb+0xdc/0x114)
-[ 2730.676815] [<8069af44>] (usb_kill_urb) from [<7f258b50>] (brcmf_usb_free_q+0x34/0xa8 [brcmfmac])
-[ 2730.684833] [<7f258b50>] (brcmf_usb_free_q [brcmfmac]) from [<7f2517d4>] (brcmf_detach+0xa0/0xb8 [brcmfmac])
-[ 2730.693557] [<7f2517d4>] (brcmf_detach [brcmfmac]) from [<7f251a34>] (brcmf_attach+0xac/0x3d8 [brcmfmac])
-[ 2730.702094] [<7f251a34>] (brcmf_attach [brcmfmac]) from [<7f2587ac>] (brcmf_usb_probe_phase2+0x468/0x4a0 [brcmfmac])
-[ 2730.711601] [<7f2587ac>] (brcmf_usb_probe_phase2 [brcmfmac]) from [<7f252888>] (brcmf_fw_request_done+0x194/0x220 [brcmfmac])
-[ 2730.721795] [<7f252888>] (brcmf_fw_request_done [brcmfmac]) from [<805748e4>] (request_firmware_work_func+0x4c/0x88)
-[ 2730.731125] [<805748e4>] (request_firmware_work_func) from [<80141474>] (process_one_work+0x228/0x808)
-[ 2730.739223] [<80141474>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564)
-[ 2730.746105] [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c)
-[ 2730.752227] [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20)
-
-[ 2733.099695] kworker/0:3 D 0 1065 2 0x00000000
-[ 2733.103926] Workqueue: usb_hub_wq hub_event
-[ 2733.106914] [<809dca20>] (__schedule) from [<809dd164>] (schedule+0x4c/0xac)
-[ 2733.112693] [<809dd164>] (schedule) from [<809e2a8c>] (schedule_timeout+0x214/0x3e4)
-[ 2733.119621] [<809e2a8c>] (schedule_timeout) from [<809dde2c>] (wait_for_common+0xc4/0x1c0)
-[ 2733.126810] [<809dde2c>] (wait_for_common) from [<7f258d00>] (brcmf_usb_disconnect+0x1c/0x4c [brcmfmac])
-[ 2733.135206] [<7f258d00>] (brcmf_usb_disconnect [brcmfmac]) from [<8069e0c8>] (usb_unbind_interface+0x5c/0x1e4)
-[ 2733.143943] [<8069e0c8>] (usb_unbind_interface) from [<8056d3e8>] (device_release_driver_internal+0x164/0x1fc)
-[ 2733.152769] [<8056d3e8>] (device_release_driver_internal) from [<8056c078>] (bus_remove_device+0xd0/0xfc)
-[ 2733.161138] [<8056c078>] (bus_remove_device) from [<8056977c>] (device_del+0x11c/0x310)
-[ 2733.167939] [<8056977c>] (device_del) from [<8069cba8>] (usb_disable_device+0xa0/0x1cc)
-[ 2733.174743] [<8069cba8>] (usb_disable_device) from [<8069507c>] (usb_disconnect+0x74/0x1dc)
-[ 2733.181823] [<8069507c>] (usb_disconnect) from [<80695e88>] (hub_event+0x478/0xf88)
-[ 2733.188278] [<80695e88>] (hub_event) from [<80141474>] (process_one_work+0x228/0x808)
-[ 2733.194905] [<80141474>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564)
-[ 2733.201724] [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c)
-[ 2733.207913] [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20)
-
-It was traced down to a case where usb_kill_urb would be called on an URB
-structure containing more or less random data, including large number in
-its use_count. During the debugging it appeared that in brcmf_usb_free_q()
-the traversal over URBs' lists is not synchronized with operations on those
-lists in brcmf_usb_rx_complete() leading to handling
-brcmf_usbdev_info structure (holding lists' head) as lists' element and in
-result causing above problem.
-
-Fix it by walking through all URBs during brcmf_cancel_all_urbs using the
-arrays of requests instead of linked lists.
-
-Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-@@ -682,12 +682,18 @@ static int brcmf_usb_up(struct device *d
-
- static void brcmf_cancel_all_urbs(struct brcmf_usbdev_info *devinfo)
- {
-+ int i;
-+
- if (devinfo->ctl_urb)
- usb_kill_urb(devinfo->ctl_urb);
- if (devinfo->bulk_urb)
- usb_kill_urb(devinfo->bulk_urb);
-- brcmf_usb_free_q(&devinfo->tx_postq, true);
-- brcmf_usb_free_q(&devinfo->rx_postq, true);
-+ if (devinfo->tx_reqs)
-+ for (i = 0; i < devinfo->bus_pub.ntxq; i++)
-+ usb_kill_urb(devinfo->tx_reqs[i].urb);
-+ if (devinfo->rx_reqs)
-+ for (i = 0; i < devinfo->bus_pub.nrxq; i++)
-+ usb_kill_urb(devinfo->rx_reqs[i].urb);
- }
-
- static void brcmf_usb_down(struct device *dev)
diff --git a/package/kernel/mac80211/patches/brcm/362-v5.2-0002-brcmfmac-remove-pending-parameter-from-brcmf_usb_fre.patch b/package/kernel/mac80211/patches/brcm/362-v5.2-0002-brcmfmac-remove-pending-parameter-from-brcmf_usb_fre.patch
deleted file mode 100644
index 088e731322..0000000000
--- a/package/kernel/mac80211/patches/brcm/362-v5.2-0002-brcmfmac-remove-pending-parameter-from-brcmf_usb_fre.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 2b78e5f5223666d403d4fdb30af4ad65c8da3cdb Mon Sep 17 00:00:00 2001
-From: Piotr Figiel <p.figiel@camlintechnologies.com>
-Date: Fri, 8 Mar 2019 15:25:06 +0000
-Subject: [PATCH] brcmfmac: remove pending parameter from brcmf_usb_free_q
-
-brcmf_usb_free_q is no longer called with pending=true thus this boolean
-parameter is no longer needed.
-
-Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/usb.c | 15 ++++++---------
- 1 file changed, 6 insertions(+), 9 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-@@ -445,9 +445,10 @@ fail:
-
- }
-
--static void brcmf_usb_free_q(struct list_head *q, bool pending)
-+static void brcmf_usb_free_q(struct list_head *q)
- {
- struct brcmf_usbreq *req, *next;
-+
- int i = 0;
- list_for_each_entry_safe(req, next, q, list) {
- if (!req->urb) {
-@@ -455,12 +456,8 @@ static void brcmf_usb_free_q(struct list
- break;
- }
- i++;
-- if (pending) {
-- usb_kill_urb(req->urb);
-- } else {
-- usb_free_urb(req->urb);
-- list_del_init(&req->list);
-- }
-+ usb_free_urb(req->urb);
-+ list_del_init(&req->list);
- }
- }
-
-@@ -1029,8 +1026,8 @@ static void brcmf_usb_detach(struct brcm
- brcmf_dbg(USB, "Enter, devinfo %p\n", devinfo);
-
- /* free the URBS */
-- brcmf_usb_free_q(&devinfo->rx_freeq, false);
-- brcmf_usb_free_q(&devinfo->tx_freeq, false);
-+ brcmf_usb_free_q(&devinfo->rx_freeq);
-+ brcmf_usb_free_q(&devinfo->tx_freeq);
-
- usb_free_urb(devinfo->ctl_urb);
- usb_free_urb(devinfo->bulk_urb);
diff --git a/package/kernel/mac80211/patches/brcm/362-v5.2-0003-brcmfmac-remove-unused-variable-i-from-brcmf_usb_fre.patch b/package/kernel/mac80211/patches/brcm/362-v5.2-0003-brcmfmac-remove-unused-variable-i-from-brcmf_usb_fre.patch
deleted file mode 100644
index 4c8d073914..0000000000
--- a/package/kernel/mac80211/patches/brcm/362-v5.2-0003-brcmfmac-remove-unused-variable-i-from-brcmf_usb_fre.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 504f06725d015954a0fcafdf1d90a6795ca8f769 Mon Sep 17 00:00:00 2001
-From: Piotr Figiel <p.figiel@camlintechnologies.com>
-Date: Fri, 8 Mar 2019 15:25:09 +0000
-Subject: [PATCH] brcmfmac: remove unused variable i from brcmf_usb_free_q
-
-Variable i is not used so remove it.
-
-Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-@@ -449,13 +449,11 @@ static void brcmf_usb_free_q(struct list
- {
- struct brcmf_usbreq *req, *next;
-
-- int i = 0;
- list_for_each_entry_safe(req, next, q, list) {
- if (!req->urb) {
- brcmf_err("bad req\n");
- break;
- }
-- i++;
- usb_free_urb(req->urb);
- list_del_init(&req->list);
- }
diff --git a/package/kernel/mac80211/patches/brcm/363-v5.2-brcmfmac-fix-Oops-when-bringing-up-interface-during-.patch b/package/kernel/mac80211/patches/brcm/363-v5.2-brcmfmac-fix-Oops-when-bringing-up-interface-during-.patch
deleted file mode 100644
index 01e9bf076d..0000000000
--- a/package/kernel/mac80211/patches/brcm/363-v5.2-brcmfmac-fix-Oops-when-bringing-up-interface-during-.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From 24d413a31afaee9bbbf79226052c386b01780ce2 Mon Sep 17 00:00:00 2001
-From: Piotr Figiel <p.figiel@camlintechnologies.com>
-Date: Wed, 13 Mar 2019 09:52:01 +0000
-Subject: [PATCH] brcmfmac: fix Oops when bringing up interface during USB
- disconnect
-
-Fix a race which leads to an Oops with NULL pointer dereference. The
-dereference is in brcmf_config_dongle() when cfg_to_ndev() attempts to get
-net_device structure of interface with index 0 via if2bss mapping. This
-shouldn't fail because of check for bus being ready in brcmf_netdev_open(),
-but it's not synchronised with USB disconnect and there is a race: after
-the check the bus can be marked down and the mapping for interface 0 may be
-gone.
-
-Solve this by modifying disconnect handling so that the removal of mapping
-of ifidx to brcmf_if structure happens after netdev removal (which is
-synchronous with brcmf_netdev_open() thanks to rtln being locked in
-devinet_ioctl()). This assures brcmf_netdev_open() returns before the
-mapping is removed during disconnect.
-
-Unable to handle kernel NULL pointer dereference at virtual address 00000008
-pgd = bcae2612
-[00000008] *pgd=8be73831
-Internal error: Oops: 17 [#1] PREEMPT SMP ARM
-Modules linked in: brcmfmac brcmutil nf_log_ipv4 nf_log_common xt_LOG xt_limit
-iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6
-nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis
-u_ether usb_serial_simple usbserial cdc_acm smsc95xx usbnet ci_hdrc_imx ci_hdrc
-usbmisc_imx ulpi 8250_exar 8250_pci 8250 8250_base libcomposite configfs
-udc_core [last unloaded: brcmutil]
-CPU: 2 PID: 24478 Comm: ifconfig Not tainted 4.19.23-00078-ga62866d-dirty #115
-Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
-PC is at brcmf_cfg80211_up+0x94/0x29c [brcmfmac]
-LR is at brcmf_cfg80211_up+0x8c/0x29c [brcmfmac]
-pc : [<7f26a91c>] lr : [<7f26a914>] psr: a0070013
-sp : eca99d28 ip : 00000000 fp : ee9c6c00
-r10: 00000036 r9 : 00000000 r8 : ece4002c
-r7 : edb5b800 r6 : 00000000 r5 : 80f08448 r4 : edb5b968
-r3 : ffffffff r2 : 00000000 r1 : 00000002 r0 : 00000000
-Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
-Control: 10c5387d Table: 7ca0c04a DAC: 00000051
-Process ifconfig (pid: 24478, stack limit = 0xd9e85a0e)
-Stack: (0xeca99d28 to 0xeca9a000)
-9d20: 00000000 80f873b0 0000000d 80f08448 eca99d68 50d45f32
-9d40: 7f27de94 ece40000 80f08448 80f08448 7f27de94 ece4002c 00000000 00000036
-9d60: ee9c6c00 7f27262c 00001002 50d45f32 ece40000 00000000 80f08448 80772008
-9d80: 00000001 00001043 00001002 ece40000 00000000 50d45f32 ece40000 00000001
-9da0: 80f08448 00001043 00001002 807723d0 00000000 50d45f32 80f08448 eca99e58
-9dc0: 80f87113 50d45f32 80f08448 ece40000 ece40138 00001002 80f08448 00000000
-9de0: 00000000 80772434 edbd5380 eca99e58 edbd5380 80f08448 ee9c6c0c 80805f70
-9e00: 00000000 ede08e00 00008914 ece40000 00000014 ee9c6c0c 600c0013 00001043
-9e20: 0208a8c0 ffffffff 00000000 50d45f32 eca98000 80f08448 7ee9fc38 00008914
-9e40: 80f68e40 00000051 eca98000 00000036 00000003 80808b9c 6e616c77 00000030
-9e60: 00000000 00000000 00001043 0208a8c0 ffffffff 00000000 80f08448 00000000
-9e80: 00000000 816d8b20 600c0013 00000001 ede09320 801763d4 00000000 50d45f32
-9ea0: eca98000 80f08448 7ee9fc38 50d45f32 00008914 80f08448 7ee9fc38 80f68e40
-9ec0: ed531540 8074721c 00000800 00000001 00000000 6e616c77 00000030 00000000
-9ee0: 00000000 00001002 0208a8c0 ffffffff 00000000 50d45f32 80f08448 7ee9fc38
-9f00: ed531560 ec8fc900 80285a6c 80285138 edb910c0 00000000 ecd91008 ede08e00
-9f20: 80f08448 00000000 00000000 816d8b20 600c0013 00000001 ede09320 801763d4
-9f40: 00000000 50d45f32 00021000 edb91118 edb910c0 80f08448 01b29000 edb91118
-9f60: eca99f7c 50d45f32 00021000 ec8fc900 00000003 ec8fc900 00008914 7ee9fc38
-9f80: eca98000 00000036 00000003 80285a6c 00086364 7ee9fe1c 000000c3 00000036
-9fa0: 801011c4 80101000 00086364 7ee9fe1c 00000003 00008914 7ee9fc38 00086364
-9fc0: 00086364 7ee9fe1c 000000c3 00000036 0008630c 7ee9fe1c 7ee9fc38 00000003
-9fe0: 000a42b8 7ee9fbd4 00019914 76e09acc 600c0010 00000003 00000000 00000000
-[<7f26a91c>] (brcmf_cfg80211_up [brcmfmac]) from [<7f27262c>] (brcmf_netdev_open+0x74/0xe8 [brcmfmac])
-[<7f27262c>] (brcmf_netdev_open [brcmfmac]) from [<80772008>] (__dev_open+0xcc/0x150)
-[<80772008>] (__dev_open) from [<807723d0>] (__dev_change_flags+0x168/0x1b4)
-[<807723d0>] (__dev_change_flags) from [<80772434>] (dev_change_flags+0x18/0x48)
-[<80772434>] (dev_change_flags) from [<80805f70>] (devinet_ioctl+0x67c/0x79c)
-[<80805f70>] (devinet_ioctl) from [<80808b9c>] (inet_ioctl+0x210/0x3d4)
-[<80808b9c>] (inet_ioctl) from [<8074721c>] (sock_ioctl+0x350/0x524)
-[<8074721c>] (sock_ioctl) from [<80285138>] (do_vfs_ioctl+0xb0/0x9b0)
-[<80285138>] (do_vfs_ioctl) from [<80285a6c>] (ksys_ioctl+0x34/0x5c)
-[<80285a6c>] (ksys_ioctl) from [<80101000>] (ret_fast_syscall+0x0/0x28)
-Exception stack(0xeca99fa8 to 0xeca99ff0)
-9fa0: 00086364 7ee9fe1c 00000003 00008914 7ee9fc38 00086364
-9fc0: 00086364 7ee9fe1c 000000c3 00000036 0008630c 7ee9fe1c 7ee9fc38 00000003
-9fe0: 000a42b8 7ee9fbd4 00019914 76e09acc
-Code: e5970328 eb002021 e1a02006 e3a01002 (e5909008)
----[ end trace 5cbac2333f3ac5df ]---
-
-Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/broadcom/brcm80211/brcmfmac/core.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -862,17 +862,17 @@ static void brcmf_del_if(struct brcmf_pu
- bool rtnl_locked)
- {
- struct brcmf_if *ifp;
-+ int ifidx;
-
- ifp = drvr->iflist[bsscfgidx];
-- drvr->iflist[bsscfgidx] = NULL;
- if (!ifp) {
- bphy_err(drvr, "Null interface, bsscfgidx=%d\n", bsscfgidx);
- return;
- }
- brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", bsscfgidx,
- ifp->ifidx);
-- if (drvr->if2bss[ifp->ifidx] == bsscfgidx)
-- drvr->if2bss[ifp->ifidx] = BRCMF_BSSIDX_INVALID;
-+ ifidx = ifp->ifidx;
-+
- if (ifp->ndev) {
- if (bsscfgidx == 0) {
- if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) {
-@@ -900,6 +900,10 @@ static void brcmf_del_if(struct brcmf_pu
- brcmf_p2p_ifp_removed(ifp, rtnl_locked);
- kfree(ifp);
- }
-+
-+ drvr->iflist[bsscfgidx] = NULL;
-+ if (drvr->if2bss[ifidx] == bsscfgidx)
-+ drvr->if2bss[ifidx] = BRCMF_BSSIDX_INVALID;
- }
-
- void brcmf_remove_interface(struct brcmf_if *ifp, bool rtnl_locked)
diff --git a/package/kernel/mac80211/patches/brcm/364-v5.2-brcmfmac-convert-dev_init_lock-mutex-to-completion.patch b/package/kernel/mac80211/patches/brcm/364-v5.2-brcmfmac-convert-dev_init_lock-mutex-to-completion.patch
deleted file mode 100644
index e6ecd2215f..0000000000
--- a/package/kernel/mac80211/patches/brcm/364-v5.2-brcmfmac-convert-dev_init_lock-mutex-to-completion.patch
+++ /dev/null
@@ -1,182 +0,0 @@
-From a9fd0953fa4a62887306be28641b4b0809f3b2fd Mon Sep 17 00:00:00 2001
-From: Piotr Figiel <p.figiel@camlintechnologies.com>
-Date: Wed, 13 Mar 2019 09:52:42 +0000
-Subject: [PATCH] brcmfmac: convert dev_init_lock mutex to completion
-
-Leaving dev_init_lock mutex locked in probe causes BUG and a WARNING when
-kernel is compiled with CONFIG_PROVE_LOCKING. Convert mutex to completion
-which silences those warnings and improves code readability.
-
-Fix below errors when connecting the USB WiFi dongle:
-
-brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43143 for chip BCM43143/2
-BUG: workqueue leaked lock or atomic: kworker/0:2/0x00000000/434
- last function: hub_event
-1 lock held by kworker/0:2/434:
- #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac]
-CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123
-Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
-Workqueue: usb_hub_wq hub_event
-[<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14)
-[<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4)
-[<809c4324>] (dump_stack) from [<8014195c>] (process_one_work+0x710/0x808)
-[<8014195c>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564)
-[<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c)
-[<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20)
-Exception stack(0xed1d9fb0 to 0xed1d9ff8)
-9fa0: 00000000 00000000 00000000 00000000
-9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
-
-======================================================
-WARNING: possible circular locking dependency detected
-4.19.23-00084-g454a789-dirty #123 Not tainted
-------------------------------------------------------
-kworker/0:2/434 is trying to acquire lock:
-e29cf799 ((wq_completion)"events"){+.+.}, at: process_one_work+0x174/0x808
-
-but task is already holding lock:
-18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac]
-
-which lock already depends on the new lock.
-
-the existing dependency chain (in reverse order) is:
-
--> #2 (&devinfo->dev_init_lock){+.+.}:
- mutex_lock_nested+0x1c/0x24
- brcmf_usb_probe+0x78/0x550 [brcmfmac]
- usb_probe_interface+0xc0/0x1bc
- really_probe+0x228/0x2c0
- __driver_attach+0xe4/0xe8
- bus_for_each_dev+0x68/0xb4
- bus_add_driver+0x19c/0x214
- driver_register+0x78/0x110
- usb_register_driver+0x84/0x148
- process_one_work+0x228/0x808
- worker_thread+0x2c/0x564
- kthread+0x13c/0x16c
- ret_from_fork+0x14/0x20
- (null)
-
--> #1 (brcmf_driver_work){+.+.}:
- worker_thread+0x2c/0x564
- kthread+0x13c/0x16c
- ret_from_fork+0x14/0x20
- (null)
-
--> #0 ((wq_completion)"events"){+.+.}:
- process_one_work+0x1b8/0x808
- worker_thread+0x2c/0x564
- kthread+0x13c/0x16c
- ret_from_fork+0x14/0x20
- (null)
-
-other info that might help us debug this:
-
-Chain exists of:
- (wq_completion)"events" --> brcmf_driver_work --> &devinfo->dev_init_lock
-
- Possible unsafe locking scenario:
-
- CPU0 CPU1
- ---- ----
- lock(&devinfo->dev_init_lock);
- lock(brcmf_driver_work);
- lock(&devinfo->dev_init_lock);
- lock((wq_completion)"events");
-
- *** DEADLOCK ***
-
-1 lock held by kworker/0:2/434:
- #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac]
-
-stack backtrace:
-CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123
-Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
-Workqueue: events request_firmware_work_func
-[<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14)
-[<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4)
-[<809c4324>] (dump_stack) from [<80172838>] (print_circular_bug+0x210/0x330)
-[<80172838>] (print_circular_bug) from [<80175940>] (__lock_acquire+0x160c/0x1a30)
-[<80175940>] (__lock_acquire) from [<8017671c>] (lock_acquire+0xe0/0x268)
-[<8017671c>] (lock_acquire) from [<80141404>] (process_one_work+0x1b8/0x808)
-[<80141404>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564)
-[<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c)
-[<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20)
-Exception stack(0xed1d9fb0 to 0xed1d9ff8)
-9fa0: 00000000 00000000 00000000 00000000
-9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
-
-Signed-off-by: Piotr Figiel <p.figiel@camlintechnologies.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../wireless/broadcom/brcm80211/brcmfmac/usb.c | 17 ++++++++---------
- 1 file changed, 8 insertions(+), 9 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-@@ -160,7 +160,7 @@ struct brcmf_usbdev_info {
-
- struct usb_device *usbdev;
- struct device *dev;
-- struct mutex dev_init_lock;
-+ struct completion dev_init_done;
-
- int ctl_in_pipe, ctl_out_pipe;
- struct urb *ctl_urb; /* URB for control endpoint */
-@@ -1194,11 +1194,11 @@ static void brcmf_usb_probe_phase2(struc
- if (ret)
- goto error;
-
-- mutex_unlock(&devinfo->dev_init_lock);
-+ complete(&devinfo->dev_init_done);
- return;
- error:
- brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret);
-- mutex_unlock(&devinfo->dev_init_lock);
-+ complete(&devinfo->dev_init_done);
- device_release_driver(dev);
- }
-
-@@ -1266,7 +1266,7 @@ static int brcmf_usb_probe_cb(struct brc
- if (ret)
- goto fail;
- /* we are done */
-- mutex_unlock(&devinfo->dev_init_lock);
-+ complete(&devinfo->dev_init_done);
- return 0;
- }
- bus->chip = bus_pub->devid;
-@@ -1326,11 +1326,10 @@ brcmf_usb_probe(struct usb_interface *in
-
- devinfo->usbdev = usb;
- devinfo->dev = &usb->dev;
-- /* Take an init lock, to protect for disconnect while still loading.
-+ /* Init completion, to protect for disconnect while still loading.
- * Necessary because of the asynchronous firmware load construction
- */
-- mutex_init(&devinfo->dev_init_lock);
-- mutex_lock(&devinfo->dev_init_lock);
-+ init_completion(&devinfo->dev_init_done);
-
- usb_set_intfdata(intf, devinfo);
-
-@@ -1408,7 +1407,7 @@ brcmf_usb_probe(struct usb_interface *in
- return 0;
-
- fail:
-- mutex_unlock(&devinfo->dev_init_lock);
-+ complete(&devinfo->dev_init_done);
- kfree(devinfo);
- usb_set_intfdata(intf, NULL);
- return ret;
-@@ -1423,7 +1422,7 @@ brcmf_usb_disconnect(struct usb_interfac
- devinfo = (struct brcmf_usbdev_info *)usb_get_intfdata(intf);
-
- if (devinfo) {
-- mutex_lock(&devinfo->dev_init_lock);
-+ wait_for_completion(&devinfo->dev_init_done);
- /* Make sure that devinfo still exists. Firmware probe routines
- * may have released the device and cleared the intfdata.
- */
diff --git a/package/kernel/mac80211/patches/brcm/365-v5.2-brcmfmac-fix-missing-checks-for-kmemdup.patch b/package/kernel/mac80211/patches/brcm/365-v5.2-brcmfmac-fix-missing-checks-for-kmemdup.patch
deleted file mode 100644
index 87974dcc6f..0000000000
--- a/package/kernel/mac80211/patches/brcm/365-v5.2-brcmfmac-fix-missing-checks-for-kmemdup.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 46953f97224d56a12ccbe9c6acaa84ca0dab2780 Mon Sep 17 00:00:00 2001
-From: Kangjie Lu <kjlu@umn.edu>
-Date: Fri, 15 Mar 2019 12:04:32 -0500
-Subject: [PATCH] brcmfmac: fix missing checks for kmemdup
-
-In case kmemdup fails, the fix sets conn_info->req_ie_len and
-conn_info->resp_ie_len to zero to avoid buffer overflows.
-
-Signed-off-by: Kangjie Lu <kjlu@umn.edu>
-Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -5456,6 +5456,8 @@ static s32 brcmf_get_assoc_ies(struct br
- conn_info->req_ie =
- kmemdup(cfg->extra_buf, conn_info->req_ie_len,
- GFP_KERNEL);
-+ if (!conn_info->req_ie)
-+ conn_info->req_ie_len = 0;
- } else {
- conn_info->req_ie_len = 0;
- conn_info->req_ie = NULL;
-@@ -5472,6 +5474,8 @@ static s32 brcmf_get_assoc_ies(struct br
- conn_info->resp_ie =
- kmemdup(cfg->extra_buf, conn_info->resp_ie_len,
- GFP_KERNEL);
-+ if (!conn_info->resp_ie)
-+ conn_info->resp_ie_len = 0;
- } else {
- conn_info->resp_ie_len = 0;
- conn_info->resp_ie = NULL;
diff --git a/package/kernel/mac80211/patches/brcm/366-v5.2-brcmfmac-Use-struct_size-in-kzalloc.patch b/package/kernel/mac80211/patches/brcm/366-v5.2-brcmfmac-Use-struct_size-in-kzalloc.patch
deleted file mode 100644
index d00a9d7964..0000000000
--- a/package/kernel/mac80211/patches/brcm/366-v5.2-brcmfmac-Use-struct_size-in-kzalloc.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 0cf83903aad03dc7f444a47990def48c4a9d3276 Mon Sep 17 00:00:00 2001
-From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
-Date: Wed, 3 Apr 2019 11:46:11 -0500
-Subject: [PATCH] brcmfmac: Use struct_size() in kzalloc()
-
-One of the more common cases of allocation size calculations is finding
-the size of a structure that has a zero-sized array at the end, along
-with memory for some number of elements for that array. For example:
-
-struct foo {
- int stuff;
- struct boo entry[];
-};
-
-size = sizeof(struct foo) + count * sizeof(struct boo);
-instance = kzalloc(size, GFP_KERNEL)
-
-Instead of leaving these open-coded and prone to type mistakes, we can
-now use the new struct_size() helper:
-
-instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL)
-
-Notice that, in this case, variable reqsz is not necessary,
-hence it is removed.
-
-This code was detected with the help of Coccinelle.
-
-Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -711,7 +711,6 @@ brcmf_fw_alloc_request(u32 chip, u32 chi
- size_t mp_path_len;
- u32 i, j;
- char end = '\0';
-- size_t reqsz;
-
- for (i = 0; i < table_size; i++) {
- if (mapping_table[i].chipid == chip &&
-@@ -726,8 +725,7 @@ brcmf_fw_alloc_request(u32 chip, u32 chi
- return NULL;
- }
-
-- reqsz = sizeof(*fwreq) + n_fwnames * sizeof(struct brcmf_fw_item);
-- fwreq = kzalloc(reqsz, GFP_KERNEL);
-+ fwreq = kzalloc(struct_size(fwreq, items, n_fwnames), GFP_KERNEL);
- if (!fwreq)
- return NULL;
-
diff --git a/package/kernel/mac80211/patches/brcm/367-v5.2-brcmfmac-Loading-the-correct-firmware-for-brcm43456.patch b/package/kernel/mac80211/patches/brcm/367-v5.2-brcmfmac-Loading-the-correct-firmware-for-brcm43456.patch
deleted file mode 100644
index d19284e672..0000000000
--- a/package/kernel/mac80211/patches/brcm/367-v5.2-brcmfmac-Loading-the-correct-firmware-for-brcm43456.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From e3062e05e1cfe378bb9b3fa0bef46711372bcf13 Mon Sep 17 00:00:00 2001
-From: Ondrej Jirman <megous@megous.com>
-Date: Sat, 6 Apr 2019 01:45:13 +0200
-Subject: [PATCH] brcmfmac: Loading the correct firmware for brcm43456
-
-SDIO based brcm43456 is currently misdetected as brcm43455 and the wrong
-firmware name is used. Correct the detection and load the correct
-firmware file. Chiprev for brcm43456 is "9".
-
-Signed-off-by: Ondrej Jirman <megous@megous.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -622,6 +622,7 @@ BRCMF_FW_DEF(43430A0, "brcmfmac43430a0-s
- /* Note the names are not postfixed with a1 for backward compatibility */
- BRCMF_FW_DEF(43430A1, "brcmfmac43430-sdio");
- BRCMF_FW_DEF(43455, "brcmfmac43455-sdio");
-+BRCMF_FW_DEF(43456, "brcmfmac43456-sdio");
- BRCMF_FW_DEF(4354, "brcmfmac4354-sdio");
- BRCMF_FW_DEF(4356, "brcmfmac4356-sdio");
- BRCMF_FW_DEF(4373, "brcmfmac4373-sdio");
-@@ -642,7 +643,8 @@ static const struct brcmf_firmware_mappi
- BRCMF_FW_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339),
- BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000001, 43430A0),
- BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFE, 43430A1),
-- BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455),
-+ BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0x00000200, 43456),
-+ BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFDC0, 43455),
- BRCMF_FW_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354),
- BRCMF_FW_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356),
- BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373),
diff --git a/package/kernel/mac80211/patches/brcm/368-v5.2-brcmfmac-fix-leak-of-mypkt-on-error-return-path.patch b/package/kernel/mac80211/patches/brcm/368-v5.2-brcmfmac-fix-leak-of-mypkt-on-error-return-path.patch
deleted file mode 100644
index a9a9d74c10..0000000000
--- a/package/kernel/mac80211/patches/brcm/368-v5.2-brcmfmac-fix-leak-of-mypkt-on-error-return-path.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From a927e8d8ab57e696800e20cf09a72b7dfe3bbebb Mon Sep 17 00:00:00 2001
-From: Colin Ian King <colin.king@canonical.com>
-Date: Tue, 9 Apr 2019 12:43:33 +0100
-Subject: [PATCH] brcmfmac: fix leak of mypkt on error return path
-
-Currently if the call to brcmf_sdiod_set_backplane_window fails then
-error return path leaks mypkt. Fix this by returning by a new
-error path labelled 'out' that calls brcmu_pkt_buf_free_skb to free
-mypkt. Also remove redundant check on err before calling
-brcmf_sdiod_skbuff_write.
-
-Addresses-Coverity: ("Resource Leak")
-Fixes: a7c3aa1509e2 ("brcmfmac: Remove brcmf_sdiod_addrprep()")
-Signed-off-by: Colin Ian King <colin.king@canonical.com>
-Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
-@@ -617,15 +617,13 @@ int brcmf_sdiod_send_buf(struct brcmf_sd
-
- err = brcmf_sdiod_set_backplane_window(sdiodev, addr);
- if (err)
-- return err;
-+ goto out;
-
- addr &= SBSDIO_SB_OFT_ADDR_MASK;
- addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
-
-- if (!err)
-- err = brcmf_sdiod_skbuff_write(sdiodev, sdiodev->func2, addr,
-- mypkt);
--
-+ err = brcmf_sdiod_skbuff_write(sdiodev, sdiodev->func2, addr, mypkt);
-+out:
- brcmu_pkt_buf_free_skb(mypkt);
-
- return err;
diff --git a/package/kernel/mac80211/patches/brcm/369-v5.2-brcmfmac-Add-DMI-nvram-filename-quirk-for-ACEPC-T8-a.patch b/package/kernel/mac80211/patches/brcm/369-v5.2-brcmfmac-Add-DMI-nvram-filename-quirk-for-ACEPC-T8-a.patch
deleted file mode 100644
index b0207d8e10..0000000000
--- a/package/kernel/mac80211/patches/brcm/369-v5.2-brcmfmac-Add-DMI-nvram-filename-quirk-for-ACEPC-T8-a.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From b1a0ba8f772d7a6dcb5aa3e856f5bd8274989ebe Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 22 Apr 2019 22:41:23 +0200
-Subject: [PATCH] brcmfmac: Add DMI nvram filename quirk for ACEPC T8 and T11
- mini PCs
-
-The ACEPC T8 and T11 mini PCs contain quite generic names in the sys_vendor
-and product_name DMI strings, without this patch brcmfmac will try to load:
-"brcmfmac43455-sdio.Default string-Default string.txt" as nvram file which
-is way too generic.
-
-The DMI strings on which we are matching are somewhat generic too, but
-"To be filled by O.E.M." is less common then "Default string" and the
-system-sku and bios-version strings are pretty unique. Beside the DMI
-strings we also check the wifi-module chip-id and revision. I'm confident
-that the combination of all this is unique.
-
-Both the T8 and T11 use the same wifi-module, this commit adds DMI
-quirks for both mini PCs pointing to brcmfmac43455-sdio.acepc-t8.txt .
-
-BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1690852
-Cc: stable@vger.kernel.org
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/dmi.c | 26 +++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
-@@ -31,6 +31,10 @@ struct brcmf_dmi_data {
-
- /* NOTE: Please keep all entries sorted alphabetically */
-
-+static const struct brcmf_dmi_data acepc_t8_data = {
-+ BRCM_CC_4345_CHIP_ID, 6, "acepc-t8"
-+};
-+
- static const struct brcmf_dmi_data gpd_win_pocket_data = {
- BRCM_CC_4356_CHIP_ID, 2, "gpd-win-pocket"
- };
-@@ -49,6 +53,28 @@ static const struct brcmf_dmi_data pov_t
-
- static const struct dmi_system_id dmi_platform_data[] = {
- {
-+ /* ACEPC T8 Cherry Trail Z8350 mini PC */
-+ .matches = {
-+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
-+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
-+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "T8"),
-+ /* also match on somewhat unique bios-version */
-+ DMI_EXACT_MATCH(DMI_BIOS_VERSION, "1.000"),
-+ },
-+ .driver_data = (void *)&acepc_t8_data,
-+ },
-+ {
-+ /* ACEPC T11 Cherry Trail Z8350 mini PC, same wifi as the T8 */
-+ .matches = {
-+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
-+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
-+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "T11"),
-+ /* also match on somewhat unique bios-version */
-+ DMI_EXACT_MATCH(DMI_BIOS_VERSION, "1.000"),
-+ },
-+ .driver_data = (void *)&acepc_t8_data,
-+ },
-+ {
- /* Match for the GPDwin which unfortunately uses somewhat
- * generic dmi strings, which is why we test for 4 strings.
- * Comparing against 23 other byt/cht boards, board_vendor
diff --git a/package/kernel/mac80211/patches/brcm/370-v5.2-brcmfmac-send-mailbox-interrupt-twice-for-specific-h.patch b/package/kernel/mac80211/patches/brcm/370-v5.2-brcmfmac-send-mailbox-interrupt-twice-for-specific-h.patch
deleted file mode 100644
index c0a1fcd615..0000000000
--- a/package/kernel/mac80211/patches/brcm/370-v5.2-brcmfmac-send-mailbox-interrupt-twice-for-specific-h.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 99d94ef367af67f630b38c93ff46c5819b7d06b6 Mon Sep 17 00:00:00 2001
-From: Wright Feng <Wright.Feng@cypress.com>
-Date: Thu, 25 Apr 2019 07:05:46 +0000
-Subject: [PATCH] brcmfmac: send mailbox interrupt twice for specific hardware
- device
-
-For PCIE wireless device with core revision less than 14, device may miss
-PCIE to System Backplane Interrupt via PCIEtoSBMailbox. So add sending
-mail box interrupt twice as a hardware workaround.
-
-Signed-off-by: Wright Feng <wright.feng@cypress.com>
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -698,7 +698,11 @@ brcmf_pcie_send_mb_data(struct brcmf_pci
-
- brcmf_pcie_write_tcm32(devinfo, addr, htod_mb_data);
- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
-- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
-+
-+ /* Send mailbox interrupt twice as a hardware workaround */
-+ core = brcmf_chip_get_core(devinfo->ci, BCMA_CORE_PCIE2);
-+ if (core->rev <= 13)
-+ pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
-
- return 0;
- }
diff --git a/package/kernel/mac80211/patches/brcm/371-v5.2-Revert-brcmfmac-send-mailbox-interrupt-twice-for-spe.patch b/package/kernel/mac80211/patches/brcm/371-v5.2-Revert-brcmfmac-send-mailbox-interrupt-twice-for-spe.patch
deleted file mode 100644
index 8c7e6a8b93..0000000000
--- a/package/kernel/mac80211/patches/brcm/371-v5.2-Revert-brcmfmac-send-mailbox-interrupt-twice-for-spe.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 324f1feb960c79a07df3acde89a119a5aa80cb10 Mon Sep 17 00:00:00 2001
-From: Kalle Valo <kvalo@codeaurora.org>
-Date: Thu, 25 Apr 2019 20:08:31 +0300
-Subject: [PATCH] Revert "brcmfmac: send mailbox interrupt twice for specific
- hardware device"
-
-This reverts commit 99d94ef367af67f630b38c93ff46c5819b7d06b6. I accidentally
-applied this broken (failed to compile) patch due to a bug in my patchwork
-script.
-
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 6 +-----
- 1 file changed, 1 insertion(+), 5 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -698,11 +698,7 @@ brcmf_pcie_send_mb_data(struct brcmf_pci
-
- brcmf_pcie_write_tcm32(devinfo, addr, htod_mb_data);
- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
--
-- /* Send mailbox interrupt twice as a hardware workaround */
-- core = brcmf_chip_get_core(devinfo->ci, BCMA_CORE_PCIE2);
-- if (core->rev <= 13)
-- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
-+ pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
-
- return 0;
- }
diff --git a/package/kernel/mac80211/patches/brcm/372-v5.2-brcmfmac-send-mailbox-interrupt-twice-for-specific-h.patch b/package/kernel/mac80211/patches/brcm/372-v5.2-brcmfmac-send-mailbox-interrupt-twice-for-specific-h.patch
deleted file mode 100644
index 1fcf8c70c7..0000000000
--- a/package/kernel/mac80211/patches/brcm/372-v5.2-brcmfmac-send-mailbox-interrupt-twice-for-specific-h.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 9ef77fbedad9ea8895cd5d7fb7aee16071f527dc Mon Sep 17 00:00:00 2001
-From: Wright Feng <Wright.Feng@cypress.com>
-Date: Fri, 26 Apr 2019 03:12:32 +0000
-Subject: [PATCH] brcmfmac: send mailbox interrupt twice for specific hardware
- device
-
-For PCIE wireless device with core revision less than 14, device may miss
-PCIE to System Backplane Interrupt via PCIEtoSBMailbox. So add sending
-mail box interrupt twice as a hardware workaround.
-
-Signed-off-by: Wright Feng <wright.feng@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -675,6 +675,7 @@ static int
- brcmf_pcie_send_mb_data(struct brcmf_pciedev_info *devinfo, u32 htod_mb_data)
- {
- struct brcmf_pcie_shared_info *shared;
-+ struct brcmf_core *core;
- u32 addr;
- u32 cur_htod_mb_data;
- u32 i;
-@@ -698,7 +699,11 @@ brcmf_pcie_send_mb_data(struct brcmf_pci
-
- brcmf_pcie_write_tcm32(devinfo, addr, htod_mb_data);
- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
-- pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
-+
-+ /* Send mailbox interrupt twice as a hardware workaround */
-+ core = brcmf_chip_get_core(devinfo->ci, BCMA_CORE_PCIE2);
-+ if (core->rev <= 13)
-+ pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
-
- return 0;
- }
diff --git a/package/kernel/mac80211/patches/brcm/373-v5.2-brcm80211-potential-NULL-dereference-in-brcmf_cfg802.patch b/package/kernel/mac80211/patches/brcm/373-v5.2-brcm80211-potential-NULL-dereference-in-brcmf_cfg802.patch
deleted file mode 100644
index b4d56c34bc..0000000000
--- a/package/kernel/mac80211/patches/brcm/373-v5.2-brcm80211-potential-NULL-dereference-in-brcmf_cfg802.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From e025da3d7aa4770bb1d1b3b0aa7cc4da1744852d Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Wed, 24 Apr 2019 12:52:18 +0300
-Subject: [PATCH] brcm80211: potential NULL dereference in
- brcmf_cfg80211_vndr_cmds_dcmd_handler()
-
-If "ret_len" is negative then it could lead to a NULL dereference.
-
-The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative
-then we don't allocate the "dcmd_buf" buffer. Then we pass "ret_len" to
-brcmf_fil_cmd_data_set() where it is cast to a very high u32 value.
-Most of the functions in that call tree check whether the buffer we pass
-is NULL but there are at least a couple places which don't such as
-brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd(). We memcpy() to and
-from the buffer so it would result in a NULL dereference.
-
-The fix is to change the types so that "ret_len" can't be negative. (If
-we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an
-issue).
-
-Fixes: 1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command")
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
-@@ -35,9 +35,10 @@ static int brcmf_cfg80211_vndr_cmds_dcmd
- struct brcmf_if *ifp;
- const struct brcmf_vndr_dcmd_hdr *cmdhdr = data;
- struct sk_buff *reply;
-- int ret, payload, ret_len;
-+ unsigned int payload, ret_len;
- void *dcmd_buf = NULL, *wr_pointer;
- u16 msglen, maxmsglen = PAGE_SIZE - 0x100;
-+ int ret;
-
- if (len < sizeof(*cmdhdr)) {
- brcmf_err("vendor command too short: %d\n", len);
-@@ -65,7 +66,7 @@ static int brcmf_cfg80211_vndr_cmds_dcmd
- brcmf_err("oversize return buffer %d\n", ret_len);
- ret_len = BRCMF_DCMD_MAXLEN;
- }
-- payload = max(ret_len, len) + 1;
-+ payload = max_t(unsigned int, ret_len, len) + 1;
- dcmd_buf = vzalloc(payload);
- if (NULL == dcmd_buf)
- return -ENOMEM;
diff --git a/package/kernel/mac80211/patches/brcm/374-v5.2-brcmfmac-set-txflow-request-id-from-1-to-pktids-arra.patch b/package/kernel/mac80211/patches/brcm/374-v5.2-brcmfmac-set-txflow-request-id-from-1-to-pktids-arra.patch
deleted file mode 100644
index 6702dd57b6..0000000000
--- a/package/kernel/mac80211/patches/brcm/374-v5.2-brcmfmac-set-txflow-request-id-from-1-to-pktids-arra.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 2d91c8ad068a5cad4d9e7ece8dc811a697c7176a Mon Sep 17 00:00:00 2001
-From: Wright Feng <Wright.Feng@cypress.com>
-Date: Fri, 26 Apr 2019 03:41:46 +0000
-Subject: [PATCH] brcmfmac: set txflow request id from 1 to pktids array size
-
-Some PCIE firmwares drop txstatus if pktid is 0 and make packet held in
-host side and never be released. If that packet type is 802.1x, the
-pend_8021x_cnt value will be always greater than 0 and show "Timed out
-waiting for no pending 802.1x packets" error message when sending key to
-dongle every time.
-
-To be compatible with all firmwares, host should set txflow request id
-from 1 instead of from 0.
-
-Signed-off-by: Wright Feng <wright.feng@cypress.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
-@@ -375,7 +375,7 @@ brcmf_msgbuf_get_pktid(struct device *de
- struct brcmf_msgbuf_pktid *pktid;
- struct sk_buff *skb;
-
-- if (idx >= pktids->array_size) {
-+ if (idx < 0 || idx >= pktids->array_size) {
- brcmf_err("Invalid packet id %d (max %d)\n", idx,
- pktids->array_size);
- return NULL;
-@@ -747,7 +747,7 @@ static void brcmf_msgbuf_txflow(struct b
- tx_msghdr = (struct msgbuf_tx_msghdr *)ret_ptr;
-
- tx_msghdr->msg.msgtype = MSGBUF_TYPE_TX_POST;
-- tx_msghdr->msg.request_id = cpu_to_le32(pktid);
-+ tx_msghdr->msg.request_id = cpu_to_le32(pktid + 1);
- tx_msghdr->msg.ifidx = brcmf_flowring_ifidx_get(flow, flowid);
- tx_msghdr->flags = BRCMF_MSGBUF_PKT_FLAGS_FRAME_802_3;
- tx_msghdr->flags |= (skb->priority & 0x07) <<
-@@ -884,7 +884,7 @@ brcmf_msgbuf_process_txstatus(struct brc
- u16 flowid;
-
- tx_status = (struct msgbuf_tx_status *)buf;
-- idx = le32_to_cpu(tx_status->msg.request_id);
-+ idx = le32_to_cpu(tx_status->msg.request_id) - 1;
- flowid = le16_to_cpu(tx_status->compl_hdr.flow_ring_id);
- flowid -= BRCMF_H2D_MSGRING_FLOWRING_IDSTART;
- skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev,
diff --git a/package/kernel/mac80211/patches/brcm/375-v5.2-brcmfmac-print-firmware-messages-after-a-firmware-cr.patch b/package/kernel/mac80211/patches/brcm/375-v5.2-brcmfmac-print-firmware-messages-after-a-firmware-cr.patch
deleted file mode 100644
index ceb85055d5..0000000000
--- a/package/kernel/mac80211/patches/brcm/375-v5.2-brcmfmac-print-firmware-messages-after-a-firmware-cr.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 47dd82e3d25e85a7c7c4e4b0eac9d297d1e5e2d4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 28 Apr 2019 23:38:26 +0200
-Subject: [PATCH] brcmfmac: print firmware messages after a firmware crash
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Normally firmware messages are printed with debugging enabled only. It's
-a good idea as firmware may print a lot of messages that normal users
-don't need to care about.
-
-However, on firmware crash, it may be very helpful to log all recent
-messages. There is almost always a backtrace available as well as rought
-info on the latest actions/state.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../broadcom/brcm80211/brcmfmac/pcie.c | 24 ++++++++++++++-----
- 1 file changed, 18 insertions(+), 6 deletions(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -764,15 +764,22 @@ static void brcmf_pcie_bus_console_init(
- console->base_addr, console->buf_addr, console->bufsize);
- }
-
--
--static void brcmf_pcie_bus_console_read(struct brcmf_pciedev_info *devinfo)
-+/**
-+ * brcmf_pcie_bus_console_read - reads firmware messages
-+ *
-+ * @error: specifies if error has occurred (prints messages unconditionally)
-+ */
-+static void brcmf_pcie_bus_console_read(struct brcmf_pciedev_info *devinfo,
-+ bool error)
- {
-+ struct pci_dev *pdev = devinfo->pdev;
-+ struct brcmf_bus *bus = dev_get_drvdata(&pdev->dev);
- struct brcmf_pcie_console *console;
- u32 addr;
- u8 ch;
- u32 newidx;
-
-- if (!BRCMF_FWCON_ON())
-+ if (!error && !BRCMF_FWCON_ON())
- return;
-
- console = &devinfo->shared.console;
-@@ -796,7 +803,10 @@ static void brcmf_pcie_bus_console_read(
- }
- if (ch == '\n') {
- console->log_str[console->log_idx] = 0;
-- pr_debug("CONSOLE: %s", console->log_str);
-+ if (error)
-+ brcmf_err(bus, "CONSOLE: %s", console->log_str);
-+ else
-+ pr_debug("CONSOLE: %s", console->log_str);
- console->log_idx = 0;
- }
- }
-@@ -857,7 +867,7 @@ static irqreturn_t brcmf_pcie_isr_thread
- &devinfo->pdev->dev);
- }
- }
-- brcmf_pcie_bus_console_read(devinfo);
-+ brcmf_pcie_bus_console_read(devinfo, false);
- if (devinfo->state == BRCMFMAC_PCIE_STATE_UP)
- brcmf_pcie_intr_enable(devinfo);
- devinfo->in_irq = false;
-@@ -1426,6 +1436,8 @@ static int brcmf_pcie_reset(struct devic
- struct brcmf_fw_request *fwreq;
- int err;
-
-+ brcmf_pcie_bus_console_read(devinfo, true);
-+
- brcmf_detach(dev);
-
- brcmf_pcie_release_irq(devinfo);
-@@ -1818,7 +1830,7 @@ static void brcmf_pcie_setup(struct devi
- if (brcmf_attach(&devinfo->pdev->dev, devinfo->settings) == 0)
- return;
-
-- brcmf_pcie_bus_console_read(devinfo);
-+ brcmf_pcie_bus_console_read(devinfo, false);
-
- fail:
- device_release_driver(dev);
diff --git a/package/kernel/mac80211/patches/brcm/810-b43-gpio-mask-module-option.patch b/package/kernel/mac80211/patches/brcm/810-b43-gpio-mask-module-option.patch
index 6861667b2b..a5706374f1 100644
--- a/package/kernel/mac80211/patches/brcm/810-b43-gpio-mask-module-option.patch
+++ b/package/kernel/mac80211/patches/brcm/810-b43-gpio-mask-module-option.patch
@@ -10,7 +10,7 @@
struct b43_phy phy;
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -85,6 +85,11 @@ MODULE_FIRMWARE("b43/ucode40.fw");
+@@ -72,6 +72,11 @@ MODULE_FIRMWARE("b43/ucode40.fw");
MODULE_FIRMWARE("b43/ucode42.fw");
MODULE_FIRMWARE("b43/ucode9.fw");
@@ -22,7 +22,7 @@
static int modparam_bad_frames_preempt;
module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
MODULE_PARM_DESC(bad_frames_preempt,
-@@ -2892,10 +2897,10 @@ static int b43_gpio_init(struct b43_wlde
+@@ -2872,10 +2877,10 @@ static int b43_gpio_init(struct b43_wlde
u32 mask, set;
b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0);
diff --git a/package/kernel/mac80211/patches/brcm/811-b43_no_pio.patch b/package/kernel/mac80211/patches/brcm/811-b43_no_pio.patch
index 5eb1dc550a..a8dbefb5d9 100644
--- a/package/kernel/mac80211/patches/brcm/811-b43_no_pio.patch
+++ b/package/kernel/mac80211/patches/brcm/811-b43_no_pio.patch
@@ -11,7 +11,7 @@
b43-$(CPTCFG_B43_LEDS) += leds.o
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -2018,10 +2018,12 @@ static void b43_do_interrupt_thread(stru
+@@ -2000,10 +2000,12 @@ static void b43_do_interrupt_thread(stru
dma_reason[0], dma_reason[1],
dma_reason[2], dma_reason[3],
dma_reason[4], dma_reason[5]);
@@ -75,7 +75,7 @@
#endif /* B43_PIO_H_ */
--- a/drivers/net/wireless/broadcom/b43/Kconfig
+++ b/drivers/net/wireless/broadcom/b43/Kconfig
-@@ -98,7 +98,7 @@ config B43_BCMA_PIO
+@@ -100,7 +100,7 @@ config B43_BCMA_PIO
default y
config B43_PIO
diff --git a/package/kernel/mac80211/patches/brcm/812-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/brcm/812-b43-add-antenna-control.patch
index d643d2f82c..6e3554701b 100644
--- a/package/kernel/mac80211/patches/brcm/812-b43-add-antenna-control.patch
+++ b/package/kernel/mac80211/patches/brcm/812-b43-add-antenna-control.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -1658,7 +1658,7 @@ static void b43_write_beacon_template(st
+@@ -1642,7 +1642,7 @@ static void b43_write_beacon_template(st
len, ram_offset, shm_size_offset, rate);
/* Write the PHY TX control parameters. */
@@ -9,7 +9,7 @@
antenna = b43_antenna_to_phyctl(antenna);
ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
/* We can't send beacons with short preamble. Would get PHY errors. */
-@@ -3307,8 +3307,8 @@ static int b43_chip_init(struct b43_wlde
+@@ -3287,8 +3287,8 @@ static int b43_chip_init(struct b43_wlde
/* Select the antennae */
if (phy->ops->set_rx_antenna)
@@ -20,7 +20,7 @@
if (phy->type == B43_PHYTYPE_B) {
value16 = b43_read16(dev, 0x005E);
-@@ -4008,7 +4008,6 @@ static int b43_op_config(struct ieee8021
+@@ -3988,7 +3988,6 @@ static int b43_op_config(struct ieee8021
struct b43_wldev *dev = wl->current_dev;
struct b43_phy *phy = &dev->phy;
struct ieee80211_conf *conf = &hw->conf;
@@ -28,7 +28,7 @@
int err = 0;
mutex_lock(&wl->mutex);
-@@ -4051,11 +4050,9 @@ static int b43_op_config(struct ieee8021
+@@ -4031,11 +4030,9 @@ static int b43_op_config(struct ieee8021
}
/* Antennas for RX and management frame TX. */
@@ -42,7 +42,7 @@
if (wl->radio_enabled != phy->radio_on) {
if (wl->radio_enabled) {
-@@ -5199,6 +5196,47 @@ static int b43_op_get_survey(struct ieee
+@@ -5179,6 +5176,47 @@ static int b43_op_get_survey(struct ieee
return 0;
}
@@ -90,7 +90,7 @@
static const struct ieee80211_ops b43_hw_ops = {
.tx = b43_op_tx,
.conf_tx = b43_op_conf_tx,
-@@ -5220,6 +5258,8 @@ static const struct ieee80211_ops b43_hw
+@@ -5200,6 +5238,8 @@ static const struct ieee80211_ops b43_hw
.sw_scan_complete = b43_op_sw_scan_complete_notifier,
.get_survey = b43_op_get_survey,
.rfkill_poll = b43_rfkill_poll,
@@ -99,7 +99,7 @@
};
/* Hard-reset the chip. Do not call this directly.
-@@ -5523,6 +5563,8 @@ static int b43_one_core_attach(struct b4
+@@ -5501,6 +5541,8 @@ static int b43_one_core_attach(struct b4
if (!wldev)
goto out;
@@ -108,14 +108,14 @@
wldev->use_pio = b43_modparam_pio;
wldev->dev = dev;
wldev->wl = wl;
-@@ -5617,6 +5659,9 @@ static struct b43_wl *b43_wireless_init(
+@@ -5595,6 +5637,9 @@ static struct b43_wl *b43_wireless_init(
wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+ hw->wiphy->available_antennas_rx = 0x3;
+ hw->wiphy->available_antennas_tx = 0x3;
+
- wl->hw_registred = false;
+ wl->hw_registered = false;
hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
--- a/drivers/net/wireless/broadcom/b43/b43.h
diff --git a/package/kernel/mac80211/patches/brcm/814-b43-only-use-gpio-0-1-for-led.patch b/package/kernel/mac80211/patches/brcm/814-b43-only-use-gpio-0-1-for-led.patch
index 03f4524c88..bd163be960 100644
--- a/package/kernel/mac80211/patches/brcm/814-b43-only-use-gpio-0-1-for-led.patch
+++ b/package/kernel/mac80211/patches/brcm/814-b43-only-use-gpio-0-1-for-led.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -2909,6 +2909,14 @@ static int b43_gpio_init(struct b43_wlde
+@@ -2889,6 +2889,14 @@ static int b43_gpio_init(struct b43_wlde
} else if (dev->dev->chip_id == 0x5354) {
/* Don't allow overtaking buttons GPIOs */
set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */
diff --git a/package/kernel/mac80211/patches/brcm/815-b43-always-take-overlapping-devs.patch b/package/kernel/mac80211/patches/brcm/815-b43-always-take-overlapping-devs.patch
index f07151aa4e..a8eae19413 100644
--- a/package/kernel/mac80211/patches/brcm/815-b43-always-take-overlapping-devs.patch
+++ b/package/kernel/mac80211/patches/brcm/815-b43-always-take-overlapping-devs.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -127,7 +127,7 @@ static int b43_modparam_pio = 0;
+@@ -114,7 +114,7 @@ static int b43_modparam_pio = 0;
module_param_named(pio, b43_modparam_pio, int, 0644);
MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
diff --git a/package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch b/package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch
index 5cbc48f76a..a7d000ee9d 100644
--- a/package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch
+++ b/package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch
@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2774,6 +2774,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
+@@ -2782,6 +2782,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
* preference in cfg struct to apply this to
* FW later while initializing the dongle
*/
diff --git a/package/kernel/mac80211/patches/build/015-ipw200-mtu.patch b/package/kernel/mac80211/patches/build/015-ipw200-mtu.patch
index d57d821fea..68dd821331 100644
--- a/package/kernel/mac80211/patches/build/015-ipw200-mtu.patch
+++ b/package/kernel/mac80211/patches/build/015-ipw200-mtu.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
-@@ -11498,6 +11498,15 @@ static const struct attribute_group ipw_
+@@ -11481,6 +11481,15 @@ static const struct attribute_group ipw_
.attrs = ipw_sysfs_entries,
};
@@ -16,7 +16,7 @@
#ifdef CPTCFG_IPW2200_PROMISCUOUS
static int ipw_prom_open(struct net_device *dev)
{
-@@ -11546,15 +11555,6 @@ static netdev_tx_t ipw_prom_hard_start_x
+@@ -11529,15 +11538,6 @@ static netdev_tx_t ipw_prom_hard_start_x
return NETDEV_TX_OK;
}
diff --git a/package/kernel/mac80211/patches/build/050-lib80211_option.patch b/package/kernel/mac80211/patches/build/050-lib80211_option.patch
index 6282cdab5f..f6e1f9be07 100644
--- a/package/kernel/mac80211/patches/build/050-lib80211_option.patch
+++ b/package/kernel/mac80211/patches/build/050-lib80211_option.patch
@@ -1,6 +1,6 @@
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
-@@ -185,7 +185,7 @@ config CFG80211_WEXT_EXPORT
+@@ -186,7 +186,7 @@ config CFG80211_WEXT_EXPORT
endif # CFG80211
config LIB80211
@@ -9,7 +9,7 @@
depends on m
default n
help
-@@ -195,15 +195,15 @@ config LIB80211
+@@ -196,15 +196,15 @@ config LIB80211
Drivers should select this themselves if needed.
config LIB80211_CRYPT_WEP
diff --git a/package/kernel/mac80211/patches/build/060-no_local_ssb_bcma.patch b/package/kernel/mac80211/patches/build/060-no_local_ssb_bcma.patch
index 06636060f7..5ef01cc61e 100644
--- a/package/kernel/mac80211/patches/build/060-no_local_ssb_bcma.patch
+++ b/package/kernel/mac80211/patches/build/060-no_local_ssb_bcma.patch
@@ -1,9 +1,9 @@
--- a/local-symbols
+++ b/local-symbols
-@@ -396,43 +396,6 @@ USB_IPHETH=
- USB_SIERRA_NET=
+@@ -410,43 +410,6 @@ USB_SIERRA_NET=
USB_VL600=
USB_NET_CH9200=
+ USB_NET_AQC111=
-SSB_POSSIBLE=
-SSB=
-SSB_SPROM=
@@ -46,7 +46,7 @@
USB_WDM=
--- a/drivers/net/wireless/broadcom/b43/Kconfig
+++ b/drivers/net/wireless/broadcom/b43/Kconfig
-@@ -61,21 +61,21 @@ endchoice
+@@ -63,21 +63,21 @@ endchoice
config B43_PCI_AUTOSELECT
bool
depends on B43 && SSB_PCIHOST_POSSIBLE
@@ -72,7 +72,7 @@
---help---
Broadcom 43xx device support for Soft-MAC SDIO devices.
-@@ -94,13 +94,13 @@ config B43_SDIO
+@@ -96,13 +96,13 @@ config B43_SDIO
config B43_BCMA_PIO
bool
depends on B43 && B43_BCMA
@@ -90,7 +90,7 @@
config B43_PHY_G
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
-@@ -2876,7 +2876,7 @@ static struct ssb_device *b43_ssb_gpio_d
+@@ -2856,7 +2856,7 @@ static struct ssb_device *b43_ssb_gpio_d
{
struct ssb_bus *bus = dev->dev->sdev->bus;
@@ -99,7 +99,7 @@
return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
#else
return bus->chipco.dev;
-@@ -4893,7 +4893,7 @@ static int b43_wireless_core_init(struct
+@@ -4873,7 +4873,7 @@ static int b43_wireless_core_init(struct
}
if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
@@ -110,7 +110,7 @@
dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
--- a/drivers/net/wireless/broadcom/b43legacy/Kconfig
+++ b/drivers/net/wireless/broadcom/b43legacy/Kconfig
-@@ -2,7 +2,7 @@ config B43LEGACY
+@@ -3,7 +3,7 @@ config B43LEGACY
tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
depends on m
depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
@@ -119,7 +119,7 @@
depends on FW_LOADER
---help---
b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and
-@@ -24,15 +24,15 @@ config B43LEGACY
+@@ -25,15 +25,15 @@ config B43LEGACY
config B43LEGACY_PCI_AUTOSELECT
bool
depends on B43LEGACY && SSB_PCIHOST_POSSIBLE
@@ -140,7 +140,7 @@
# LED support
--- a/drivers/net/wireless/broadcom/b43legacy/main.c
+++ b/drivers/net/wireless/broadcom/b43legacy/main.c
-@@ -1937,7 +1937,7 @@ static int b43legacy_gpio_init(struct b4
+@@ -1905,7 +1905,7 @@ static int b43legacy_gpio_init(struct b4
if (dev->dev->id.revision >= 2)
mask |= 0x0010; /* FIXME: This is redundant. */
@@ -149,7 +149,7 @@
pcidev = bus->pcicore.dev;
#endif
gpiodev = bus->chipco.dev ? : pcidev;
-@@ -1956,7 +1956,7 @@ static void b43legacy_gpio_cleanup(struc
+@@ -1924,7 +1924,7 @@ static void b43legacy_gpio_cleanup(struc
struct ssb_bus *bus = dev->dev->bus;
struct ssb_device *gpiodev, *pcidev = NULL;
@@ -181,7 +181,7 @@
obj-$(CPTCFG_BRCMSMAC) += brcmsmac.o
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
-@@ -7,7 +7,7 @@ config BRCMSMAC
+@@ -8,7 +8,7 @@ config BRCMSMAC
depends on m
depends on MAC80211
depends on BCMA_POSSIBLE
@@ -192,10 +192,10 @@
select BRCMUTIL
--- a/Kconfig.local
+++ b/Kconfig.local
-@@ -1192,117 +1192,6 @@ config BACKPORTED_USB_VL600
- config BACKPORTED_USB_NET_CH9200
+@@ -1234,117 +1234,6 @@ config BACKPORTED_USB_NET_CH9200
+ config BACKPORTED_USB_NET_AQC111
tristate
- default USB_NET_CH9200
+ default USB_NET_AQC111
-config BACKPORTED_SSB_POSSIBLE
- tristate
- default SSB_POSSIBLE
diff --git a/package/kernel/mac80211/patches/mwl/700-mwl8k-missing-pci-id-for-WNR854T.patch b/package/kernel/mac80211/patches/mwl/700-mwl8k-missing-pci-id-for-WNR854T.patch
index f3e311a2e9..cfa40e1bd2 100644
--- a/package/kernel/mac80211/patches/mwl/700-mwl8k-missing-pci-id-for-WNR854T.patch
+++ b/package/kernel/mac80211/patches/mwl/700-mwl8k-missing-pci-id-for-WNR854T.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
-@@ -5686,6 +5686,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
+@@ -5694,6 +5694,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API));
static const struct pci_device_id mwl8k_pci_id_table[] = {
diff --git a/package/kernel/mac80211/patches/mwl/801-libertas-configure-sysfs-links.patch b/package/kernel/mac80211/patches/mwl/801-libertas-configure-sysfs-links.patch
index c3e6db8f05..90adb66bb1 100644
--- a/package/kernel/mac80211/patches/mwl/801-libertas-configure-sysfs-links.patch
+++ b/package/kernel/mac80211/patches/mwl/801-libertas-configure-sysfs-links.patch
@@ -11,7 +11,7 @@
err_wiphy_new:
--- a/drivers/net/wireless/marvell/libertas/main.c
+++ b/drivers/net/wireless/marvell/libertas/main.c
-@@ -930,6 +930,7 @@ struct lbs_private *lbs_add_card(void *c
+@@ -935,6 +935,7 @@ struct lbs_private *lbs_add_card(void *c
goto err_adapter;
}
diff --git a/package/kernel/mac80211/patches/mwl/940-mwl8k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/mwl/940-mwl8k_init_devices_synchronously.patch
index 61a6c4c70f..f3130f7ae7 100644
--- a/package/kernel/mac80211/patches/mwl/940-mwl8k_init_devices_synchronously.patch
+++ b/package/kernel/mac80211/patches/mwl/940-mwl8k_init_devices_synchronously.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
-@@ -6271,6 +6271,8 @@ static int mwl8k_probe(struct pci_dev *p
+@@ -6279,6 +6279,8 @@ static int mwl8k_probe(struct pci_dev *p
priv->running_bsses = 0;
@@ -9,7 +9,7 @@
return rc;
err_stop_firmware:
-@@ -6304,8 +6306,6 @@ static void mwl8k_remove(struct pci_dev
+@@ -6312,8 +6314,6 @@ static void mwl8k_remove(struct pci_dev
return;
priv = hw->priv;
diff --git a/package/kernel/mac80211/patches/mwl/941-mwl8k-Fix-rate_idx-underflow.patch b/package/kernel/mac80211/patches/mwl/941-mwl8k-Fix-rate_idx-underflow.patch
deleted file mode 100644
index d034dcf51f..0000000000
--- a/package/kernel/mac80211/patches/mwl/941-mwl8k-Fix-rate_idx-underflow.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From b897577af85bb5e5638efa780bc3716fae5212d3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Mon, 8 Apr 2019 09:45:56 +0200
-Subject: [PATCH] mwl8k: Fix rate_idx underflow
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It was reported on OpenWrt bug tracking system[1], that several users
-are affected by the endless reboot of their routers if they configure
-5GHz interface with channel 44 or 48.
-
-The reboot loop is caused by the following excessive number of WARN_ON
-messages:
-
- WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516
- ieee80211_rx_napi+0x1fc/0xa54 [mac80211]
-
-as the messages are being correctly emitted by the following guard:
-
- case RX_ENC_LEGACY:
- if (WARN_ON(status->rate_idx >= sband->n_bitrates))
-
-as the rate_idx is in this case erroneously set to 251 (0xfb). This fix
-simply converts previously used magic number to proper constant and
-guards against substraction which is leading to the currently observed
-underflow.
-
-1. https://bugs.openwrt.org/index.php?do=details&task_id=2218
-
-Fixes: 854783444bab ("mwl8k: properly set receive status rate index on 5 GHz receive")
-Cc: <stable@vger.kernel.org>
-Tested-by: Eubert Bao <bunnier@gmail.com>
-Reported-by: Eubert Bao <bunnier@gmail.com>
-Signed-off-by: Petr Å tetiar <ynezz@true.cz>
----
- drivers/net/wireless/marvell/mwl8k.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireless/marvell/mwl8k.c
-+++ b/drivers/net/wireless/marvell/mwl8k.c
-@@ -441,6 +441,9 @@ static const struct ieee80211_rate mwl8k
- #define MWL8K_CMD_UPDATE_STADB 0x1123
- #define MWL8K_CMD_BASTREAM 0x1125
-
-+#define MWL8K_LEGACY_5G_RATE_OFFSET \
-+ (ARRAY_SIZE(mwl8k_rates_24) - ARRAY_SIZE(mwl8k_rates_50))
-+
- static const char *mwl8k_cmd_name(__le16 cmd, char *buf, int bufsize)
- {
- u16 command = le16_to_cpu(cmd);
-@@ -1016,8 +1019,9 @@ mwl8k_rxd_ap_process(void *_rxd, struct
-
- if (rxd->channel > 14) {
- status->band = NL80211_BAND_5GHZ;
-- if (!(status->encoding == RX_ENC_HT))
-- status->rate_idx -= 5;
-+ if (!(status->encoding == RX_ENC_HT) &&
-+ status->rate_idx >= MWL8K_LEGACY_5G_RATE_OFFSET)
-+ status->rate_idx -= MWL8K_LEGACY_5G_RATE_OFFSET;
- } else {
- status->band = NL80211_BAND_2GHZ;
- }
-@@ -1124,8 +1128,9 @@ mwl8k_rxd_sta_process(void *_rxd, struct
-
- if (rxd->channel > 14) {
- status->band = NL80211_BAND_5GHZ;
-- if (!(status->encoding == RX_ENC_HT))
-- status->rate_idx -= 5;
-+ if (!(status->encoding == RX_ENC_HT) &&
-+ status->rate_idx >= MWL8K_LEGACY_5G_RATE_OFFSET)
-+ status->rate_idx -= MWL8K_LEGACY_5G_RATE_OFFSET;
- } else {
- status->band = NL80211_BAND_2GHZ;
- }
diff --git a/package/kernel/mac80211/patches/rt2x00/001-rt2x00-use-simple_read_from_buffer.patch b/package/kernel/mac80211/patches/rt2x00/001-rt2x00-use-simple_read_from_buffer.patch
deleted file mode 100644
index 1319cc244c..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/001-rt2x00-use-simple_read_from_buffer.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From f483039cf51acf30494cd754194562c22cf98764 Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Wed, 22 Aug 2018 13:41:26 +0300
-Subject: [PATCH 01/28] rt2x00: use simple_read_from_buffer()
-
-The problem with this copy_to_user() calls is that they don't ensure
-that "size" is less than the "length" which the user provided.
-
-Obviously, this is debugfs and "size" is normally going to be very small
-so it probably doesn't matter, but this is the correct thing to do.
-
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/ralink/rt2x00/rt2x00debug.c | 18 +++---------------
- 1 file changed, 3 insertions(+), 15 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-@@ -464,11 +464,7 @@ static ssize_t rt2x00debug_read_##__name
- \
- size = sprintf(line, __format, value); \
- \
-- if (copy_to_user(buf, line, size)) \
-- return -EFAULT; \
-- \
-- *offset += size; \
-- return size; \
-+ return simple_read_from_buffer(buf, length, offset, line, size); \
- }
-
- #define RT2X00DEBUGFS_OPS_WRITE(__name, __type) \
-@@ -545,11 +541,7 @@ static ssize_t rt2x00debug_read_dev_flag
-
- size = sprintf(line, "0x%.8x\n", (unsigned int)intf->rt2x00dev->flags);
-
-- if (copy_to_user(buf, line, size))
-- return -EFAULT;
--
-- *offset += size;
-- return size;
-+ return simple_read_from_buffer(buf, length, offset, line, size);
- }
-
- static const struct file_operations rt2x00debug_fop_dev_flags = {
-@@ -574,11 +566,7 @@ static ssize_t rt2x00debug_read_cap_flag
-
- size = sprintf(line, "0x%.8x\n", (unsigned int)intf->rt2x00dev->cap_flags);
-
-- if (copy_to_user(buf, line, size))
-- return -EFAULT;
--
-- *offset += size;
-- return size;
-+ return simple_read_from_buffer(buf, length, offset, line, size);
- }
-
- static const struct file_operations rt2x00debug_fop_cap_flags = {
diff --git a/package/kernel/mac80211/patches/rt2x00/002-rt2800-move-usb-specific-txdone-txstatus-routines-to.patch b/package/kernel/mac80211/patches/rt2x00/002-rt2800-move-usb-specific-txdone-txstatus-routines-to.patch
deleted file mode 100644
index a883258a4c..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/002-rt2800-move-usb-specific-txdone-txstatus-routines-to.patch
+++ /dev/null
@@ -1,357 +0,0 @@
-From 5c656c71b1bf5611ce8262bab338104e04d10b8d Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 26 Sep 2018 12:24:53 +0200
-Subject: [PATCH 02/28] rt2800: move usb specific txdone/txstatus routines to
- rt2800lib
-
-In order to reuse usb txdone/txstatus routines for mmio, move them
-to common rt2800lib.c file.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 138 +++++++++++++++++
- .../net/wireless/ralink/rt2x00/rt2800lib.h | 3 +
- .../net/wireless/ralink/rt2x00/rt2800usb.c | 143 +-----------------
- 3 files changed, 145 insertions(+), 139 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -957,6 +957,47 @@ static void rt2800_rate_from_status(stru
- skbdesc->tx_rate_flags = flags;
- }
-
-+static bool rt2800_txdone_entry_check(struct queue_entry *entry, u32 reg)
-+{
-+ __le32 *txwi;
-+ u32 word;
-+ int wcid, ack, pid;
-+ int tx_wcid, tx_ack, tx_pid, is_agg;
-+
-+ /*
-+ * This frames has returned with an IO error,
-+ * so the status report is not intended for this
-+ * frame.
-+ */
-+ if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
-+ return false;
-+
-+ wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
-+ ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
-+ pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
-+ is_agg = rt2x00_get_field32(reg, TX_STA_FIFO_TX_AGGRE);
-+
-+ /*
-+ * Validate if this TX status report is intended for
-+ * this entry by comparing the WCID/ACK/PID fields.
-+ */
-+ txwi = rt2800_drv_get_txwi(entry);
-+
-+ word = rt2x00_desc_read(txwi, 1);
-+ tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
-+ tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK);
-+ tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID);
-+
-+ if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) {
-+ rt2x00_dbg(entry->queue->rt2x00dev,
-+ "TX status report missed for queue %d entry %d\n",
-+ entry->queue->qid, entry->entry_idx);
-+ return false;
-+ }
-+
-+ return true;
-+}
-+
- void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
- bool match)
- {
-@@ -1059,6 +1100,103 @@ void rt2800_txdone_entry(struct queue_en
- }
- EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
-
-+void rt2800_txdone(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct data_queue *queue;
-+ struct queue_entry *entry;
-+ u32 reg;
-+ u8 qid;
-+ bool match;
-+
-+ while (kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
-+ /*
-+ * TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is
-+ * guaranteed to be one of the TX QIDs .
-+ */
-+ qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
-+ queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
-+
-+ if (unlikely(rt2x00queue_empty(queue))) {
-+ rt2x00_dbg(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
-+ qid);
-+ break;
-+ }
-+
-+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-+
-+ if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
-+ !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) {
-+ rt2x00_warn(rt2x00dev, "Data pending for entry %u in queue %u\n",
-+ entry->entry_idx, qid);
-+ break;
-+ }
-+
-+ match = rt2800_txdone_entry_check(entry, reg);
-+ rt2800_txdone_entry(entry, reg, rt2800_drv_get_txwi(entry), match);
-+ }
-+}
-+EXPORT_SYMBOL_GPL(rt2800_txdone);
-+
-+static inline bool rt2800_entry_txstatus_timeout(struct queue_entry *entry)
-+{
-+ bool tout;
-+
-+ if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
-+ return false;
-+
-+ tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(500));
-+ if (unlikely(tout))
-+ rt2x00_dbg(entry->queue->rt2x00dev,
-+ "TX status timeout for entry %d in queue %d\n",
-+ entry->entry_idx, entry->queue->qid);
-+ return tout;
-+
-+}
-+
-+bool rt2800_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct data_queue *queue;
-+ struct queue_entry *entry;
-+
-+ tx_queue_for_each(rt2x00dev, queue) {
-+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-+ if (rt2800_entry_txstatus_timeout(entry))
-+ return true;
-+ }
-+ return false;
-+}
-+EXPORT_SYMBOL_GPL(rt2800_txstatus_timeout);
-+
-+void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct data_queue *queue;
-+ struct queue_entry *entry;
-+
-+ /*
-+ * Process any trailing TX status reports for IO failures,
-+ * we loop until we find the first non-IO error entry. This
-+ * can either be a frame which is free, is being uploaded,
-+ * or has completed the upload but didn't have an entry
-+ * in the TX_STAT_FIFO register yet.
-+ */
-+ tx_queue_for_each(rt2x00dev, queue) {
-+ while (!rt2x00queue_empty(queue)) {
-+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-+
-+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
-+ !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
-+ break;
-+
-+ if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags) ||
-+ rt2800_entry_txstatus_timeout(entry))
-+ rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
-+ else
-+ break;
-+ }
-+ }
-+}
-+EXPORT_SYMBOL_GPL(rt2800_txdone_nostatus);
-+
- static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev,
- unsigned int index)
- {
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -195,6 +195,9 @@ void rt2800_process_rxwi(struct queue_en
-
- void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
- bool match);
-+void rt2800_txdone(struct rt2x00_dev *rt2x00dev);
-+void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev);
-+bool rt2800_txstatus_timeout(struct rt2x00_dev *rt2x00dev);
-
- void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
- void rt2800_clear_beacon(struct queue_entry *entry);
---- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-@@ -116,35 +116,6 @@ static bool rt2800usb_txstatus_pending(s
- return false;
- }
-
--static inline bool rt2800usb_entry_txstatus_timeout(struct queue_entry *entry)
--{
-- bool tout;
--
-- if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
-- return false;
--
-- tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(500));
-- if (unlikely(tout))
-- rt2x00_dbg(entry->queue->rt2x00dev,
-- "TX status timeout for entry %d in queue %d\n",
-- entry->entry_idx, entry->queue->qid);
-- return tout;
--
--}
--
--static bool rt2800usb_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
--{
-- struct data_queue *queue;
-- struct queue_entry *entry;
--
-- tx_queue_for_each(rt2x00dev, queue) {
-- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-- if (rt2800usb_entry_txstatus_timeout(entry))
-- return true;
-- }
-- return false;
--}
--
- #define TXSTATUS_READ_INTERVAL 1000000
-
- static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
-@@ -171,7 +142,7 @@ static bool rt2800usb_tx_sta_fifo_read_c
- }
-
- /* Check if there is any entry that timedout waiting on TX status */
-- if (rt2800usb_txstatus_timeout(rt2x00dev))
-+ if (rt2800_txstatus_timeout(rt2x00dev))
- queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
-
- if (rt2800usb_txstatus_pending(rt2x00dev)) {
-@@ -501,123 +472,17 @@ static int rt2800usb_get_tx_data_len(str
- /*
- * TX control handlers
- */
--static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
--{
-- __le32 *txwi;
-- u32 word;
-- int wcid, ack, pid;
-- int tx_wcid, tx_ack, tx_pid, is_agg;
--
-- /*
-- * This frames has returned with an IO error,
-- * so the status report is not intended for this
-- * frame.
-- */
-- if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
-- return false;
--
-- wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
-- ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
-- pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
-- is_agg = rt2x00_get_field32(reg, TX_STA_FIFO_TX_AGGRE);
--
-- /*
-- * Validate if this TX status report is intended for
-- * this entry by comparing the WCID/ACK/PID fields.
-- */
-- txwi = rt2800usb_get_txwi(entry);
--
-- word = rt2x00_desc_read(txwi, 1);
-- tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
-- tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK);
-- tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID);
--
-- if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) {
-- rt2x00_dbg(entry->queue->rt2x00dev,
-- "TX status report missed for queue %d entry %d\n",
-- entry->queue->qid, entry->entry_idx);
-- return false;
-- }
--
-- return true;
--}
--
--static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
--{
-- struct data_queue *queue;
-- struct queue_entry *entry;
-- u32 reg;
-- u8 qid;
-- bool match;
--
-- while (kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
-- /*
-- * TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is
-- * guaranteed to be one of the TX QIDs .
-- */
-- qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
-- queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
--
-- if (unlikely(rt2x00queue_empty(queue))) {
-- rt2x00_dbg(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
-- qid);
-- break;
-- }
--
-- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
--
-- if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
-- !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) {
-- rt2x00_warn(rt2x00dev, "Data pending for entry %u in queue %u\n",
-- entry->entry_idx, qid);
-- break;
-- }
--
-- match = rt2800usb_txdone_entry_check(entry, reg);
-- rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry), match);
-- }
--}
--
--static void rt2800usb_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
--{
-- struct data_queue *queue;
-- struct queue_entry *entry;
--
-- /*
-- * Process any trailing TX status reports for IO failures,
-- * we loop until we find the first non-IO error entry. This
-- * can either be a frame which is free, is being uploaded,
-- * or has completed the upload but didn't have an entry
-- * in the TX_STAT_FIFO register yet.
-- */
-- tx_queue_for_each(rt2x00dev, queue) {
-- while (!rt2x00queue_empty(queue)) {
-- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
--
-- if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
-- !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
-- break;
--
-- if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags) ||
-- rt2800usb_entry_txstatus_timeout(entry))
-- rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
-- else
-- break;
-- }
-- }
--}
--
- static void rt2800usb_work_txdone(struct work_struct *work)
- {
- struct rt2x00_dev *rt2x00dev =
- container_of(work, struct rt2x00_dev, txdone_work);
-
- while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
-- rt2800usb_txstatus_timeout(rt2x00dev)) {
-+ rt2800_txstatus_timeout(rt2x00dev)) {
-
-- rt2800usb_txdone(rt2x00dev);
-+ rt2800_txdone(rt2x00dev);
-
-- rt2800usb_txdone_nostatus(rt2x00dev);
-+ rt2800_txdone_nostatus(rt2x00dev);
-
- /*
- * The hw may delay sending the packet after DMA complete
diff --git a/package/kernel/mac80211/patches/rt2x00/003-rt2800mmio-use-txdone-txstatus-routines-from-lib.patch b/package/kernel/mac80211/patches/rt2x00/003-rt2800mmio-use-txdone-txstatus-routines-from-lib.patch
deleted file mode 100644
index 48f0c27011..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/003-rt2800mmio-use-txdone-txstatus-routines-from-lib.patch
+++ /dev/null
@@ -1,244 +0,0 @@
-From 0b0d556e0ebb6c966bc993e21a22a156812d8fdf Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 26 Sep 2018 12:24:54 +0200
-Subject: [PATCH 03/28] rt2800mmio: use txdone/txstatus routines from lib
-
-Use usb txdone/txstatus routines (now in rt2800libc) for mmio devices.
-
-Note this also change how we handle INT_SOURCE_CSR_TX_FIFO_STATUS
-interrupt. Now it is disabled since IRQ routine till end of the txstatus
-tasklet (the same behaviour like others interrupts). Reason to do not
-disable this interrupt was not to miss any tx status from 16 entries
-FIFO register. Now, since we check for tx status timeout, we can
-allow to miss some tx statuses. However this will be improved in further
-patch where I also implement read status FIFO register in the tasklet.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/ralink/rt2x00/rt2800mmio.c | 180 +-----------------
- .../net/wireless/ralink/rt2x00/rt2x00queue.c | 1 +
- 2 files changed, 9 insertions(+), 172 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-@@ -175,161 +175,6 @@ static void rt2800mmio_wakeup(struct rt2
- rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
- }
-
--static bool rt2800mmio_txdone_entry_check(struct queue_entry *entry, u32 status)
--{
-- __le32 *txwi;
-- u32 word;
-- int wcid, tx_wcid;
--
-- wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
--
-- txwi = rt2800_drv_get_txwi(entry);
-- word = rt2x00_desc_read(txwi, 1);
-- tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
--
-- return (tx_wcid == wcid);
--}
--
--static bool rt2800mmio_txdone_find_entry(struct queue_entry *entry, void *data)
--{
-- u32 status = *(u32 *)data;
--
-- /*
-- * rt2800pci hardware might reorder frames when exchanging traffic
-- * with multiple BA enabled STAs.
-- *
-- * For example, a tx queue
-- * [ STA1 | STA2 | STA1 | STA2 ]
-- * can result in tx status reports
-- * [ STA1 | STA1 | STA2 | STA2 ]
-- * when the hw decides to aggregate the frames for STA1 into one AMPDU.
-- *
-- * To mitigate this effect, associate the tx status to the first frame
-- * in the tx queue with a matching wcid.
-- */
-- if (rt2800mmio_txdone_entry_check(entry, status) &&
-- !test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
-- /*
-- * Got a matching frame, associate the tx status with
-- * the frame
-- */
-- entry->status = status;
-- set_bit(ENTRY_DATA_STATUS_SET, &entry->flags);
-- return true;
-- }
--
-- /* Check the next frame */
-- return false;
--}
--
--static bool rt2800mmio_txdone_match_first(struct queue_entry *entry, void *data)
--{
-- u32 status = *(u32 *)data;
--
-- /*
-- * Find the first frame without tx status and assign this status to it
-- * regardless if it matches or not.
-- */
-- if (!test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
-- /*
-- * Got a matching frame, associate the tx status with
-- * the frame
-- */
-- entry->status = status;
-- set_bit(ENTRY_DATA_STATUS_SET, &entry->flags);
-- return true;
-- }
--
-- /* Check the next frame */
-- return false;
--}
--static bool rt2800mmio_txdone_release_entries(struct queue_entry *entry,
-- void *data)
--{
-- if (test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
-- rt2800_txdone_entry(entry, entry->status,
-- rt2800mmio_get_txwi(entry), true);
-- return false;
-- }
--
-- /* No more frames to release */
-- return true;
--}
--
--static bool rt2800mmio_txdone(struct rt2x00_dev *rt2x00dev)
--{
-- struct data_queue *queue;
-- u32 status;
-- u8 qid;
-- int max_tx_done = 16;
--
-- while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) {
-- qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE);
-- if (unlikely(qid >= QID_RX)) {
-- /*
-- * Unknown queue, this shouldn't happen. Just drop
-- * this tx status.
-- */
-- rt2x00_warn(rt2x00dev, "Got TX status report with unexpected pid %u, dropping\n",
-- qid);
-- break;
-- }
--
-- queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
-- if (unlikely(queue == NULL)) {
-- /*
-- * The queue is NULL, this shouldn't happen. Stop
-- * processing here and drop the tx status
-- */
-- rt2x00_warn(rt2x00dev, "Got TX status for an unavailable queue %u, dropping\n",
-- qid);
-- break;
-- }
--
-- if (unlikely(rt2x00queue_empty(queue))) {
-- /*
-- * The queue is empty. Stop processing here
-- * and drop the tx status.
-- */
-- rt2x00_warn(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
-- qid);
-- break;
-- }
--
-- /*
-- * Let's associate this tx status with the first
-- * matching frame.
-- */
-- if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
-- Q_INDEX, &status,
-- rt2800mmio_txdone_find_entry)) {
-- /*
-- * We cannot match the tx status to any frame, so just
-- * use the first one.
-- */
-- if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
-- Q_INDEX, &status,
-- rt2800mmio_txdone_match_first)) {
-- rt2x00_warn(rt2x00dev, "No frame found for TX status on queue %u, dropping\n",
-- qid);
-- break;
-- }
-- }
--
-- /*
-- * Release all frames with a valid tx status.
-- */
-- rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
-- Q_INDEX, NULL,
-- rt2800mmio_txdone_release_entries);
--
-- if (--max_tx_done == 0)
-- break;
-- }
--
-- return !max_tx_done;
--}
--
- static inline void rt2800mmio_enable_interrupt(struct rt2x00_dev *rt2x00dev,
- struct rt2x00_field32 irq_field)
- {
-@@ -349,14 +194,14 @@ static inline void rt2800mmio_enable_int
- void rt2800mmio_txstatus_tasklet(unsigned long data)
- {
- struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
-- if (rt2800mmio_txdone(rt2x00dev))
-- tasklet_schedule(&rt2x00dev->txstatus_tasklet);
-
-- /*
-- * No need to enable the tx status interrupt here as we always
-- * leave it enabled to minimize the possibility of a tx status
-- * register overflow. See comment in interrupt handler.
-- */
-+ rt2800_txdone(rt2x00dev);
-+
-+ rt2800_txdone_nostatus(rt2x00dev);
-+
-+ if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-+ rt2800mmio_enable_interrupt(rt2x00dev,
-+ INT_SOURCE_CSR_TX_FIFO_STATUS);
- }
- EXPORT_SYMBOL_GPL(rt2800mmio_txstatus_tasklet);
-
-@@ -440,10 +285,6 @@ static void rt2800mmio_txstatus_interrup
- * because we can schedule the tasklet multiple times (when the
- * interrupt fires again during tx status processing).
- *
-- * Furthermore we don't disable the TX_FIFO_STATUS
-- * interrupt here but leave it enabled so that the TX_STA_FIFO
-- * can also be read while the tx status tasklet gets executed.
-- *
- * Since we have only one producer and one consumer we don't
- * need to lock the kfifo.
- */
-@@ -485,13 +326,8 @@ irqreturn_t rt2800mmio_interrupt(int irq
- */
- mask = ~reg;
-
-- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
-+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
- rt2800mmio_txstatus_interrupt(rt2x00dev);
-- /*
-- * Never disable the TX_FIFO_STATUS interrupt.
-- */
-- rt2x00_set_field32(&mask, INT_MASK_CSR_TX_FIFO_STATUS, 1);
-- }
-
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
- tasklet_hi_schedule(&rt2x00dev->pretbtt_tasklet);
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-@@ -113,6 +113,7 @@ int rt2x00queue_map_txskb(struct queue_e
- return -ENOMEM;
-
- skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
-+ rt2x00lib_dmadone(entry);
- return 0;
- }
- EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb);
diff --git a/package/kernel/mac80211/patches/rt2x00/004-rt2x00-do-not-check-for-txstatus-timeout-every-time-.patch b/package/kernel/mac80211/patches/rt2x00/004-rt2x00-do-not-check-for-txstatus-timeout-every-time-.patch
deleted file mode 100644
index 832768d042..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/004-rt2x00-do-not-check-for-txstatus-timeout-every-time-.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 5022efb50f625d11fdf18b1fee0f64ebb1863664 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 26 Sep 2018 12:24:55 +0200
-Subject: [PATCH 04/28] rt2x00: do not check for txstatus timeout every time on
- tasklet
-
-Do not check for tx status timeout everytime we perform txstatus tasklet.
-Perform check once per half a second.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 7 +++++++
- drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 3 ++-
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 2 ++
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 1 +
- 4 files changed, 12 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -1158,11 +1158,18 @@ bool rt2800_txstatus_timeout(struct rt2x
- struct data_queue *queue;
- struct queue_entry *entry;
-
-+ if (time_before(jiffies,
-+ rt2x00dev->last_nostatus_check + msecs_to_jiffies(500)))
-+ return false;
-+
-+ rt2x00dev->last_nostatus_check = jiffies;
-+
- tx_queue_for_each(rt2x00dev, queue) {
- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
- if (rt2800_entry_txstatus_timeout(entry))
- return true;
- }
-+
- return false;
- }
- EXPORT_SYMBOL_GPL(rt2800_txstatus_timeout);
---- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-@@ -197,7 +197,8 @@ void rt2800mmio_txstatus_tasklet(unsigne
-
- rt2800_txdone(rt2x00dev);
-
-- rt2800_txdone_nostatus(rt2x00dev);
-+ if (rt2800_txstatus_timeout(rt2x00dev))
-+ rt2800_txdone_nostatus(rt2x00dev);
-
- if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2800mmio_enable_interrupt(rt2x00dev,
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -980,6 +980,8 @@ struct rt2x00_dev {
- */
- DECLARE_KFIFO_PTR(txstatus_fifo, u32);
-
-+ unsigned long last_nostatus_check;
-+
- /*
- * Timer to ensure tx status reports are read (rt2800usb).
- */
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-@@ -1039,6 +1039,7 @@ void rt2x00queue_start_queues(struct rt2
- */
- tx_queue_for_each(rt2x00dev, queue)
- rt2x00queue_start_queue(queue);
-+ rt2x00dev->last_nostatus_check = jiffies;
-
- rt2x00queue_start_queue(rt2x00dev->rx);
- }
diff --git a/package/kernel/mac80211/patches/rt2x00/005-rt2x00-use-different-txstatus-timeouts-when-flushing.patch b/package/kernel/mac80211/patches/rt2x00/005-rt2x00-use-different-txstatus-timeouts-when-flushing.patch
deleted file mode 100644
index 0f29026373..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/005-rt2x00-use-different-txstatus-timeouts-when-flushing.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From adf26a356f132e35093585521ea3e36cd185af83 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 26 Sep 2018 12:24:56 +0200
-Subject: [PATCH 05/28] rt2x00: use different txstatus timeouts when flushing
-
-Use different tx status timeouts for normal operation and when flushing.
-This increase timeout to 2s for normal operation as when there are bad
-radio conditions and frames are reposted many times device can not provide
-the status for quite long. With new timeout we can still get valid status
-on such bad conditions.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 31 +++++++++++++------
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 +
- .../net/wireless/ralink/rt2x00/rt2x00mac.c | 4 +++
- 3 files changed, 26 insertions(+), 10 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -1137,36 +1137,47 @@ void rt2800_txdone(struct rt2x00_dev *rt
- }
- EXPORT_SYMBOL_GPL(rt2800_txdone);
-
--static inline bool rt2800_entry_txstatus_timeout(struct queue_entry *entry)
-+static inline bool rt2800_entry_txstatus_timeout(struct rt2x00_dev *rt2x00dev,
-+ struct queue_entry *entry)
- {
-- bool tout;
-+ bool ret;
-+ unsigned long tout;
-
- if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
- return false;
-
-- tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(500));
-- if (unlikely(tout))
-+ if (test_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags))
-+ tout = msecs_to_jiffies(100);
-+ else
-+ tout = msecs_to_jiffies(2000);
-+
-+ ret = time_after(jiffies, entry->last_action + tout);
-+ if (unlikely(ret))
- rt2x00_dbg(entry->queue->rt2x00dev,
- "TX status timeout for entry %d in queue %d\n",
- entry->entry_idx, entry->queue->qid);
-- return tout;
--
-+ return ret;
- }
-
- bool rt2800_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
- {
- struct data_queue *queue;
- struct queue_entry *entry;
-+ unsigned long tout;
-+
-+ if (test_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags))
-+ tout = msecs_to_jiffies(50);
-+ else
-+ tout = msecs_to_jiffies(1000);
-
-- if (time_before(jiffies,
-- rt2x00dev->last_nostatus_check + msecs_to_jiffies(500)))
-+ if (time_before(jiffies, rt2x00dev->last_nostatus_check + tout))
- return false;
-
- rt2x00dev->last_nostatus_check = jiffies;
-
- tx_queue_for_each(rt2x00dev, queue) {
- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-- if (rt2800_entry_txstatus_timeout(entry))
-+ if (rt2800_entry_txstatus_timeout(rt2x00dev, entry))
- return true;
- }
-
-@@ -1195,7 +1206,7 @@ void rt2800_txdone_nostatus(struct rt2x0
- break;
-
- if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags) ||
-- rt2800_entry_txstatus_timeout(entry))
-+ rt2800_entry_txstatus_timeout(rt2x00dev, entry))
- rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
- else
- break;
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -665,6 +665,7 @@ enum rt2x00_state_flags {
- DEVICE_STATE_STARTED,
- DEVICE_STATE_ENABLED_RADIO,
- DEVICE_STATE_SCANNING,
-+ DEVICE_STATE_FLUSHING,
-
- /*
- * Driver configuration
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
-@@ -720,8 +720,12 @@ void rt2x00mac_flush(struct ieee80211_hw
- if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
- return;
-
-+ set_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags);
-+
- tx_queue_for_each(rt2x00dev, queue)
- rt2x00queue_flush_queue(queue, drop);
-+
-+ clear_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags);
- }
- EXPORT_SYMBOL_GPL(rt2x00mac_flush);
-
diff --git a/package/kernel/mac80211/patches/rt2x00/006-rt2800-flush-and-txstatus-rework-for-rt2800mmio.patch b/package/kernel/mac80211/patches/rt2x00/006-rt2800-flush-and-txstatus-rework-for-rt2800mmio.patch
deleted file mode 100644
index 784fbb16f1..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/006-rt2800-flush-and-txstatus-rework-for-rt2800mmio.patch
+++ /dev/null
@@ -1,238 +0,0 @@
-From 0240564430c0697d8fde3743d70346a922466b36 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 26 Sep 2018 12:24:57 +0200
-Subject: [PATCH 06/28] rt2800: flush and txstatus rework for rt2800mmio
-
-Implement custom rt2800mmio flush routine and change txstatus
-routine to read TX_STA_FIFO also in the tasklet.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 14 +--
- .../net/wireless/ralink/rt2x00/rt2800mmio.c | 118 +++++++++++++-----
- .../net/wireless/ralink/rt2x00/rt2800mmio.h | 1 +
- .../net/wireless/ralink/rt2x00/rt2800pci.c | 2 +-
- 4 files changed, 97 insertions(+), 38 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -1147,7 +1147,7 @@ static inline bool rt2800_entry_txstatus
- return false;
-
- if (test_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags))
-- tout = msecs_to_jiffies(100);
-+ tout = msecs_to_jiffies(50);
- else
- tout = msecs_to_jiffies(2000);
-
-@@ -1163,15 +1163,13 @@ bool rt2800_txstatus_timeout(struct rt2x
- {
- struct data_queue *queue;
- struct queue_entry *entry;
-- unsigned long tout;
-
-- if (test_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags))
-- tout = msecs_to_jiffies(50);
-- else
-- tout = msecs_to_jiffies(1000);
-+ if (!test_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags)) {
-+ unsigned long tout = msecs_to_jiffies(1000);
-
-- if (time_before(jiffies, rt2x00dev->last_nostatus_check + tout))
-- return false;
-+ if (time_before(jiffies, rt2x00dev->last_nostatus_check + tout))
-+ return false;
-+ }
-
- rt2x00dev->last_nostatus_check = jiffies;
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-@@ -191,21 +191,6 @@ static inline void rt2800mmio_enable_int
- spin_unlock_irq(&rt2x00dev->irqmask_lock);
- }
-
--void rt2800mmio_txstatus_tasklet(unsigned long data)
--{
-- struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
--
-- rt2800_txdone(rt2x00dev);
--
-- if (rt2800_txstatus_timeout(rt2x00dev))
-- rt2800_txdone_nostatus(rt2x00dev);
--
-- if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-- rt2800mmio_enable_interrupt(rt2x00dev,
-- INT_SOURCE_CSR_TX_FIFO_STATUS);
--}
--EXPORT_SYMBOL_GPL(rt2800mmio_txstatus_tasklet);
--
- void rt2800mmio_pretbtt_tasklet(unsigned long data)
- {
- struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
-@@ -270,12 +255,26 @@ void rt2800mmio_autowake_tasklet(unsigne
- }
- EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet);
-
--static void rt2800mmio_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
-+static void rt2800mmio_txdone(struct rt2x00_dev *rt2x00dev)
-+{
-+ bool timeout = false;
-+
-+ while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
-+ (timeout = rt2800_txstatus_timeout(rt2x00dev))) {
-+
-+ rt2800_txdone(rt2x00dev);
-+
-+ if (timeout)
-+ rt2800_txdone_nostatus(rt2x00dev);
-+ }
-+}
-+
-+static bool rt2800mmio_fetch_txstatus(struct rt2x00_dev *rt2x00dev)
- {
- u32 status;
-- int i;
-+ bool more = false;
-
-- /*
-+ /* FIXEME: rewrite this comment
- * The TX_FIFO_STATUS interrupt needs special care. We should
- * read TX_STA_FIFO but we should do it immediately as otherwise
- * the register can overflow and we would lose status reports.
-@@ -286,25 +285,37 @@ static void rt2800mmio_txstatus_interrup
- * because we can schedule the tasklet multiple times (when the
- * interrupt fires again during tx status processing).
- *
-- * Since we have only one producer and one consumer we don't
-+ * txstatus tasklet is called with INT_SOURCE_CSR_TX_FIFO_STATUS
-+ * disabled so have only one producer and one consumer - we don't
- * need to lock the kfifo.
- */
-- for (i = 0; i < rt2x00dev->tx->limit; i++) {
-+ while (!kfifo_is_full(&rt2x00dev->txstatus_fifo)) {
- status = rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO);
--
- if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID))
- break;
-
-- if (!kfifo_put(&rt2x00dev->txstatus_fifo, status)) {
-- rt2x00_warn(rt2x00dev, "TX status FIFO overrun, drop tx status report\n");
-- break;
-- }
-+ kfifo_put(&rt2x00dev->txstatus_fifo, status);
-+ more = true;
- }
-
-- /* Schedule the tasklet for processing the tx status. */
-- tasklet_schedule(&rt2x00dev->txstatus_tasklet);
-+ return more;
- }
-
-+void rt2800mmio_txstatus_tasklet(unsigned long data)
-+{
-+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
-+
-+ do {
-+ rt2800mmio_txdone(rt2x00dev);
-+
-+ } while (rt2800mmio_fetch_txstatus(rt2x00dev));
-+
-+ if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-+ rt2800mmio_enable_interrupt(rt2x00dev,
-+ INT_SOURCE_CSR_TX_FIFO_STATUS);
-+}
-+EXPORT_SYMBOL_GPL(rt2800mmio_txstatus_tasklet);
-+
- irqreturn_t rt2800mmio_interrupt(int irq, void *dev_instance)
- {
- struct rt2x00_dev *rt2x00dev = dev_instance;
-@@ -327,8 +338,10 @@ irqreturn_t rt2800mmio_interrupt(int irq
- */
- mask = ~reg;
-
-- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
-- rt2800mmio_txstatus_interrupt(rt2x00dev);
-+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
-+ rt2800mmio_fetch_txstatus(rt2x00dev);
-+ tasklet_schedule(&rt2x00dev->txstatus_tasklet);
-+ }
-
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
- tasklet_hi_schedule(&rt2x00dev->pretbtt_tasklet);
-@@ -453,6 +466,53 @@ void rt2800mmio_kick_queue(struct data_q
- }
- EXPORT_SYMBOL_GPL(rt2800mmio_kick_queue);
-
-+void rt2800mmio_flush_queue(struct data_queue *queue, bool drop)
-+{
-+ struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-+ bool tx_queue = false;
-+ unsigned int i;
-+
-+ switch (queue->qid) {
-+ case QID_AC_VO:
-+ case QID_AC_VI:
-+ case QID_AC_BE:
-+ case QID_AC_BK:
-+ tx_queue = true;
-+ break;
-+ case QID_RX:
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ for (i = 0; i < 5; i++) {
-+ /*
-+ * Check if the driver is already done, otherwise we
-+ * have to sleep a little while to give the driver/hw
-+ * the oppurtunity to complete interrupt process itself.
-+ */
-+ if (rt2x00queue_empty(queue))
-+ break;
-+
-+ /*
-+ * For TX queues schedule completion tasklet to catch
-+ * tx status timeouts, othewise just wait.
-+ */
-+ if (tx_queue) {
-+ tasklet_disable(&rt2x00dev->txstatus_tasklet);
-+ rt2800mmio_txdone(rt2x00dev);
-+ tasklet_enable(&rt2x00dev->txstatus_tasklet);
-+ }
-+
-+ /*
-+ * Wait for a little while to give the driver
-+ * the oppurtunity to recover itself.
-+ */
-+ msleep(50);
-+ }
-+}
-+EXPORT_SYMBOL_GPL(rt2800mmio_flush_queue);
-+
- void rt2800mmio_stop_queue(struct data_queue *queue)
- {
- struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
---- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
-@@ -148,6 +148,7 @@ void rt2800mmio_toggle_irq(struct rt2x00
- /* Queue handlers */
- void rt2800mmio_start_queue(struct data_queue *queue);
- void rt2800mmio_kick_queue(struct data_queue *queue);
-+void rt2800mmio_flush_queue(struct data_queue *queue, bool drop);
- void rt2800mmio_stop_queue(struct data_queue *queue);
- void rt2800mmio_queue_init(struct data_queue *queue);
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
-@@ -364,7 +364,7 @@ static const struct rt2x00lib_ops rt2800
- .start_queue = rt2800mmio_start_queue,
- .kick_queue = rt2800mmio_kick_queue,
- .stop_queue = rt2800mmio_stop_queue,
-- .flush_queue = rt2x00mmio_flush_queue,
-+ .flush_queue = rt2800mmio_flush_queue,
- .write_tx_desc = rt2800mmio_write_tx_desc,
- .write_tx_data = rt2800_write_tx_data,
- .write_beacon = rt2800_write_beacon,
diff --git a/package/kernel/mac80211/patches/rt2x00/007-rt2x00-rt2400pci-mark-expected-switch-fall-through.patch b/package/kernel/mac80211/patches/rt2x00/007-rt2x00-rt2400pci-mark-expected-switch-fall-through.patch
deleted file mode 100644
index 2161ad9ef3..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/007-rt2x00-rt2400pci-mark-expected-switch-fall-through.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 6eba8fd2235237784dfd01da55c3210d493aebdb Mon Sep 17 00:00:00 2001
-From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
-Date: Mon, 22 Oct 2018 22:44:34 +0200
-Subject: [PATCH 07/28] rt2x00: rt2400pci: mark expected switch fall-through
-
-In preparation to enabling -Wimplicit-fallthrough, mark switch cases
-where we are expecting to fall through.
-
-Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2400pci.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
-@@ -1302,7 +1302,7 @@ static void rt2400pci_txdone(struct rt2x
- break;
- case 2: /* Failure, excessive retries */
- __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
-- /* Don't break, this is a failed frame! */
-+ /* Fall through - this is a failed frame! */
- default: /* Failure */
- __set_bit(TXDONE_FAILURE, &txdesc.flags);
- }
diff --git a/package/kernel/mac80211/patches/rt2x00/008-rt2x00-rt2500pci-mark-expected-switch-fall-through.patch b/package/kernel/mac80211/patches/rt2x00/008-rt2x00-rt2500pci-mark-expected-switch-fall-through.patch
deleted file mode 100644
index d10de6b0e5..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/008-rt2x00-rt2500pci-mark-expected-switch-fall-through.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 10bb92217747c3384a01ebec005faa2f5e72bbd8 Mon Sep 17 00:00:00 2001
-From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
-Date: Mon, 22 Oct 2018 22:45:19 +0200
-Subject: [PATCH 08/28] rt2x00: rt2500pci: mark expected switch fall-through
-
-In preparation to enabling -Wimplicit-fallthrough, mark switch cases
-where we are expecting to fall through.
-
-Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2500pci.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
-@@ -1430,7 +1430,7 @@ static void rt2500pci_txdone(struct rt2x
- break;
- case 2: /* Failure, excessive retries */
- __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
-- /* Don't break, this is a failed frame! */
-+ /* Fall through - this is a failed frame! */
- default: /* Failure */
- __set_bit(TXDONE_FAILURE, &txdesc.flags);
- }
diff --git a/package/kernel/mac80211/patches/rt2x00/009-rt2x00-rt2800lib-mark-expected-switch-fall-throughs.patch b/package/kernel/mac80211/patches/rt2x00/009-rt2x00-rt2800lib-mark-expected-switch-fall-throughs.patch
deleted file mode 100644
index 99f971b95f..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/009-rt2x00-rt2800lib-mark-expected-switch-fall-throughs.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 916e6bbcfcff6cc5d7d33bba8557a30f3af50326 Mon Sep 17 00:00:00 2001
-From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
-Date: Mon, 22 Oct 2018 22:46:03 +0200
-Subject: [PATCH 09/28] rt2x00: rt2800lib: mark expected switch fall-throughs
-
-In preparation to enabling -Wimplicit-fallthrough, mark switch cases
-where we are expecting to fall through.
-
-Addresses-Coverity-ID: 145198 ("Missing break in switch")
-Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -2482,6 +2482,7 @@ static void rt2800_config_channel_rf3052
- switch (rt2x00dev->default_ant.tx_chain_num) {
- case 1:
- rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
-+ /* fall through */
- case 2:
- rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
- break;
-@@ -2490,6 +2491,7 @@ static void rt2800_config_channel_rf3052
- switch (rt2x00dev->default_ant.rx_chain_num) {
- case 1:
- rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
-+ /* fall through */
- case 2:
- rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
- break;
-@@ -9457,8 +9459,10 @@ static int rt2800_probe_hw_mode(struct r
- switch (rx_chains) {
- case 3:
- spec->ht.mcs.rx_mask[2] = 0xff;
-+ /* fall through */
- case 2:
- spec->ht.mcs.rx_mask[1] = 0xff;
-+ /* fall through */
- case 1:
- spec->ht.mcs.rx_mask[0] = 0xff;
- spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
diff --git a/package/kernel/mac80211/patches/rt2x00/010-rt2x00-rt61pci-mark-expected-switch-fall-through.patch b/package/kernel/mac80211/patches/rt2x00/010-rt2x00-rt61pci-mark-expected-switch-fall-through.patch
deleted file mode 100644
index 5b0f96d293..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/010-rt2x00-rt61pci-mark-expected-switch-fall-through.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 641dd8068ecb078e7d12efe465df202bc16ca5eb Mon Sep 17 00:00:00 2001
-From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
-Date: Mon, 22 Oct 2018 22:46:47 +0200
-Subject: [PATCH 10/28] rt2x00: rt61pci: mark expected switch fall-through
-
-In preparation to enabling -Wimplicit-fallthrough, mark switch cases
-where we are expecting to fall through.
-
-Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt61pci.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-@@ -2226,7 +2226,7 @@ static void rt61pci_txdone(struct rt2x00
- break;
- case 6: /* Failure, excessive retries */
- __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
-- /* Don't break, this is a failed frame! */
-+ /* Fall through - this is a failed frame! */
- default: /* Failure */
- __set_bit(TXDONE_FAILURE, &txdesc.flags);
- }
diff --git a/package/kernel/mac80211/patches/rt2x00/011-cross-tree-phase-out-dma_zalloc_coherent.patch b/package/kernel/mac80211/patches/rt2x00/011-cross-tree-phase-out-dma_zalloc_coherent.patch
deleted file mode 100644
index 8100eb063b..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/011-cross-tree-phase-out-dma_zalloc_coherent.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 750afb08ca71310fcf0c4e2cb1565c63b8235b60 Mon Sep 17 00:00:00 2001
-From: Luis Chamberlain <mcgrof@kernel.org>
-Date: Fri, 4 Jan 2019 09:23:09 +0100
-Subject: [PATCH 11/28] cross-tree: phase out dma_zalloc_coherent()
-
-We already need to zero out memory for dma_alloc_coherent(), as such
-using dma_zalloc_coherent() is superflous. Phase it out.
-
-This change was generated with the following Coccinelle SmPL patch:
-
-@ replace_dma_zalloc_coherent @
-expression dev, size, data, handle, flags;
-@@
-
--dma_zalloc_coherent(dev, size, handle, flags)
-+dma_alloc_coherent(dev, size, handle, flags)
-
-Suggested-by: Christoph Hellwig <hch@lst.de>
-Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-[hch: re-ran the script on the latest tree]
-Signed-off-by: Christoph Hellwig <hch@lst.de>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00mmio.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.c
-@@ -119,9 +119,9 @@ static int rt2x00mmio_alloc_queue_dma(st
- /*
- * Allocate DMA memory for descriptor and buffer.
- */
-- addr = dma_zalloc_coherent(rt2x00dev->dev,
-- queue->limit * queue->desc_size, &dma,
-- GFP_KERNEL);
-+ addr = dma_alloc_coherent(rt2x00dev->dev,
-+ queue->limit * queue->desc_size, &dma,
-+ GFP_KERNEL);
- if (!addr)
- return -ENOMEM;
-
diff --git a/package/kernel/mac80211/patches/rt2x00/012-rt2x00-reduce-tx-power-to-nominal-level-on-RT6352.patch b/package/kernel/mac80211/patches/rt2x00/012-rt2x00-reduce-tx-power-to-nominal-level-on-RT6352.patch
deleted file mode 100644
index a07832e97c..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/012-rt2x00-reduce-tx-power-to-nominal-level-on-RT6352.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From c2e28ef7711ffcb083474ee5f154264c6ec1ec07 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav@gmail.com>
-Date: Thu, 27 Dec 2018 15:05:25 +0100
-Subject: [PATCH 12/28] rt2x00: reduce tx power to nominal level on RT6352
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Current implementation of RT6352 support provides too high tx power
-at least on iPA/eLNA devices. Reduce amplification of variable gain
-amplifier by 6dB to match board target power of 17dBm.
-Transmited signal strength with this patch is similar to that of
-stock firmware or pandorabox firmware. Throughput measured with iperf
-improves. Device tested: Xiaomi Miwifi Mini.
-
-Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -5477,7 +5477,7 @@ static int rt2800_init_registers(struct
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
- rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002);
- rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F);
-- rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x06060606);
-+ rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
- rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
- rt2800_register_write(rt2x00dev, TX1_BB_GAIN_ATTEN, 0x0);
- rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN, 0x6C6C666C);
diff --git a/package/kernel/mac80211/patches/rt2x00/013-rt2x00-Work-around-a-firmware-bug-with-shared-keys.patch b/package/kernel/mac80211/patches/rt2x00/013-rt2x00-Work-around-a-firmware-bug-with-shared-keys.patch
deleted file mode 100644
index dc884c17d2..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/013-rt2x00-Work-around-a-firmware-bug-with-shared-keys.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From a4296994eb8061ee3455721a296c387c639bf635 Mon Sep 17 00:00:00 2001
-From: Bernd Edlinger <bernd.edlinger@hotmail.de>
-Date: Tue, 15 Jan 2019 14:01:29 +0000
-Subject: [PATCH 13/28] rt2x00: Work around a firmware bug with shared keys
-
-Apparently the rt2x61 firmware fails temporarily to decode
-broadcast packets if the shared keys are not assigned
-in the "correct" sequence. At the same time unicast
-packets work fine, since they are encrypted with the
-pairwise key.
-
-At least with WPA2 CCMP mode the shared keys are
-set in the following sequence: keyidx=1, 2, 1, 2.
-After a while only keyidx 2 gets decrypted, and
-keyidx 1 is ignored, probably because there is never
-a keyidx 3.
-
-Symptoms are arping -b works for 10 minutes, since
-keyidx=2 is used for broadcast, and then it stops
-working for 10 minutes, because keyidx=1 is used.
-That failure mode repeats forever.
-
-Note, the firmware does not even know which keyidx
-corresponds to which hw_key_idx so the firmware is
-trying to be smarter than the driver, which is bound
-to fail.
-
-As workaround the function rt61pci_config_shared_key
-requests software decryption of the shared keys,
-by returning EOPNOTSUPP. However, pairwise keys are
-still handled by hardware which works just fine.
-
-Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
-Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt61pci.c | 93 +-------------------
- 1 file changed, 4 insertions(+), 89 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-@@ -321,97 +321,12 @@ static int rt61pci_config_shared_key(str
- struct rt2x00lib_crypto *crypto,
- struct ieee80211_key_conf *key)
- {
-- struct hw_key_entry key_entry;
-- struct rt2x00_field32 field;
-- u32 mask;
-- u32 reg;
--
-- if (crypto->cmd == SET_KEY) {
-- /*
-- * rt2x00lib can't determine the correct free
-- * key_idx for shared keys. We have 1 register
-- * with key valid bits. The goal is simple, read
-- * the register, if that is full we have no slots
-- * left.
-- * Note that each BSS is allowed to have up to 4
-- * shared keys, so put a mask over the allowed
-- * entries.
-- */
-- mask = (0xf << crypto->bssidx);
--
-- reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR0);
-- reg &= mask;
--
-- if (reg && reg == mask)
-- return -ENOSPC;
--
-- key->hw_key_idx += reg ? ffz(reg) : 0;
--
-- /*
-- * Upload key to hardware
-- */
-- memcpy(key_entry.key, crypto->key,
-- sizeof(key_entry.key));
-- memcpy(key_entry.tx_mic, crypto->tx_mic,
-- sizeof(key_entry.tx_mic));
-- memcpy(key_entry.rx_mic, crypto->rx_mic,
-- sizeof(key_entry.rx_mic));
--
-- reg = SHARED_KEY_ENTRY(key->hw_key_idx);
-- rt2x00mmio_register_multiwrite(rt2x00dev, reg,
-- &key_entry, sizeof(key_entry));
--
-- /*
-- * The cipher types are stored over 2 registers.
-- * bssidx 0 and 1 keys are stored in SEC_CSR1 and
-- * bssidx 1 and 2 keys are stored in SEC_CSR5.
-- * Using the correct defines correctly will cause overhead,
-- * so just calculate the correct offset.
-- */
-- if (key->hw_key_idx < 8) {
-- field.bit_offset = (3 * key->hw_key_idx);
-- field.bit_mask = 0x7 << field.bit_offset;
--
-- reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR1);
-- rt2x00_set_field32(&reg, field, crypto->cipher);
-- rt2x00mmio_register_write(rt2x00dev, SEC_CSR1, reg);
-- } else {
-- field.bit_offset = (3 * (key->hw_key_idx - 8));
-- field.bit_mask = 0x7 << field.bit_offset;
--
-- reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR5);
-- rt2x00_set_field32(&reg, field, crypto->cipher);
-- rt2x00mmio_register_write(rt2x00dev, SEC_CSR5, reg);
-- }
--
-- /*
-- * The driver does not support the IV/EIV generation
-- * in hardware. However it doesn't support the IV/EIV
-- * inside the ieee80211 frame either, but requires it
-- * to be provided separately for the descriptor.
-- * rt2x00lib will cut the IV/EIV data out of all frames
-- * given to us by mac80211, but we must tell mac80211
-- * to generate the IV/EIV data.
-- */
-- key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
-- }
--
- /*
-- * SEC_CSR0 contains only single-bit fields to indicate
-- * a particular key is valid. Because using the FIELD32()
-- * defines directly will cause a lot of overhead, we use
-- * a calculation to determine the correct bit directly.
-+ * Let the software handle the shared keys,
-+ * since the hardware decryption does not work reliably,
-+ * because the firmware does not know the key's keyidx.
- */
-- mask = 1 << key->hw_key_idx;
--
-- reg = rt2x00mmio_register_read(rt2x00dev, SEC_CSR0);
-- if (crypto->cmd == SET_KEY)
-- reg |= mask;
-- else if (crypto->cmd == DISABLE_KEY)
-- reg &= ~mask;
-- rt2x00mmio_register_write(rt2x00dev, SEC_CSR0, reg);
--
-- return 0;
-+ return -EOPNOTSUPP;
- }
-
- static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
diff --git a/package/kernel/mac80211/patches/rt2x00/014-rt2x00-no-need-to-check-return-value-of-debugfs_crea.patch b/package/kernel/mac80211/patches/rt2x00/014-rt2x00-no-need-to-check-return-value-of-debugfs_crea.patch
deleted file mode 100644
index 26f2df10e0..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/014-rt2x00-no-need-to-check-return-value-of-debugfs_crea.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 2587791d57588562c21e5ef7e678f02ab2f3eb82 Mon Sep 17 00:00:00 2001
-From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Date: Tue, 22 Jan 2019 16:21:34 +0100
-Subject: [PATCH 14/28] rt2x00: no need to check return value of debugfs_create
- functions
-
-When calling debugfs functions, there is no need to ever check the
-return value. The function can work or not, but the code logic should
-never do something different based on this.
-
-Cc: Stanislaw Gruszka <sgruszka@redhat.com>
-Cc: Helmut Schaa <helmut.schaa@googlemail.com>
-Cc: Kalle Valo <kvalo@codeaurora.org>
-Cc: linux-wireless@vger.kernel.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/ralink/rt2x00/rt2x00debug.c | 27 -------------------
- 1 file changed, 27 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-@@ -656,36 +656,24 @@ void rt2x00debug_register(struct rt2x00_
- intf->driver_folder =
- debugfs_create_dir(intf->rt2x00dev->ops->name,
- rt2x00dev->hw->wiphy->debugfsdir);
-- if (IS_ERR(intf->driver_folder) || !intf->driver_folder)
-- goto exit;
-
- intf->driver_entry =
- rt2x00debug_create_file_driver("driver", intf, &intf->driver_blob);
-- if (IS_ERR(intf->driver_entry) || !intf->driver_entry)
-- goto exit;
-
- intf->chipset_entry =
- rt2x00debug_create_file_chipset("chipset",
- intf, &intf->chipset_blob);
-- if (IS_ERR(intf->chipset_entry) || !intf->chipset_entry)
-- goto exit;
-
- intf->dev_flags = debugfs_create_file("dev_flags", 0400,
- intf->driver_folder, intf,
- &rt2x00debug_fop_dev_flags);
-- if (IS_ERR(intf->dev_flags) || !intf->dev_flags)
-- goto exit;
-
- intf->cap_flags = debugfs_create_file("cap_flags", 0400,
- intf->driver_folder, intf,
- &rt2x00debug_fop_cap_flags);
-- if (IS_ERR(intf->cap_flags) || !intf->cap_flags)
-- goto exit;
-
- intf->register_folder =
- debugfs_create_dir("register", intf->driver_folder);
-- if (IS_ERR(intf->register_folder) || !intf->register_folder)
-- goto exit;
-
- #define RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(__intf, __name) \
- ({ \
-@@ -695,9 +683,6 @@ void rt2x00debug_register(struct rt2x00_
- 0600, \
- (__intf)->register_folder, \
- &(__intf)->offset_##__name); \
-- if (IS_ERR((__intf)->__name##_off_entry) || \
-- !(__intf)->__name##_off_entry) \
-- goto exit; \
- \
- (__intf)->__name##_val_entry = \
- debugfs_create_file(__stringify(__name) "_value", \
-@@ -705,9 +690,6 @@ void rt2x00debug_register(struct rt2x00_
- (__intf)->register_folder, \
- (__intf), \
- &rt2x00debug_fop_##__name); \
-- if (IS_ERR((__intf)->__name##_val_entry) || \
-- !(__intf)->__name##_val_entry) \
-- goto exit; \
- } \
- })
-
-@@ -721,15 +703,10 @@ void rt2x00debug_register(struct rt2x00_
-
- intf->queue_folder =
- debugfs_create_dir("queue", intf->driver_folder);
-- if (IS_ERR(intf->queue_folder) || !intf->queue_folder)
-- goto exit;
-
- intf->queue_frame_dump_entry =
- debugfs_create_file("dump", 0400, intf->queue_folder,
- intf, &rt2x00debug_fop_queue_dump);
-- if (IS_ERR(intf->queue_frame_dump_entry)
-- || !intf->queue_frame_dump_entry)
-- goto exit;
-
- skb_queue_head_init(&intf->frame_dump_skbqueue);
- init_waitqueue_head(&intf->frame_dump_waitqueue);
-@@ -747,10 +724,6 @@ void rt2x00debug_register(struct rt2x00_
- #endif
-
- return;
--
--exit:
-- rt2x00debug_deregister(rt2x00dev);
-- rt2x00_err(rt2x00dev, "Failed to register debug handler\n");
- }
-
- void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
diff --git a/package/kernel/mac80211/patches/rt2x00/015-rt2x00-remove-unneeded-check.patch b/package/kernel/mac80211/patches/rt2x00/015-rt2x00-remove-unneeded-check.patch
deleted file mode 100644
index 50e7de0855..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/015-rt2x00-remove-unneeded-check.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From 17ae2acd1a6f5148edd80d84194e5d7c80be360e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav@gmail.com>
-Date: Wed, 13 Feb 2019 11:09:12 +0100
-Subject: [PATCH 15/28] rt2x00: remove unneeded check
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Remove band check from rf53xx channel config routine since all chips
-using it are single band.
-
-Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 103 +++++++++---------
- 1 file changed, 50 insertions(+), 53 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -2966,6 +2966,7 @@ static void rt2800_config_channel_rf53xx
- struct channel_info *info)
- {
- u8 rfcsr;
-+ int idx = rf->channel-1;
-
- rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
- rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
-@@ -3003,60 +3004,56 @@ static void rt2800_config_channel_rf53xx
-
- rt2800_freq_cal_mode1(rt2x00dev);
-
-- if (rf->channel <= 14) {
-- int idx = rf->channel-1;
-+ if (rt2x00_has_cap_bt_coexist(rt2x00dev)) {
-+ if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
-+ /* r55/r59 value array of channel 1~14 */
-+ static const char r55_bt_rev[] = {0x83, 0x83,
-+ 0x83, 0x73, 0x73, 0x63, 0x53, 0x53,
-+ 0x53, 0x43, 0x43, 0x43, 0x43, 0x43};
-+ static const char r59_bt_rev[] = {0x0e, 0x0e,
-+ 0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09,
-+ 0x07, 0x07, 0x07, 0x07, 0x07, 0x07};
-+
-+ rt2800_rfcsr_write(rt2x00dev, 55,
-+ r55_bt_rev[idx]);
-+ rt2800_rfcsr_write(rt2x00dev, 59,
-+ r59_bt_rev[idx]);
-+ } else {
-+ static const char r59_bt[] = {0x8b, 0x8b, 0x8b,
-+ 0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89,
-+ 0x88, 0x88, 0x86, 0x85, 0x84};
-
-- if (rt2x00_has_cap_bt_coexist(rt2x00dev)) {
-- if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
-- /* r55/r59 value array of channel 1~14 */
-- static const char r55_bt_rev[] = {0x83, 0x83,
-- 0x83, 0x73, 0x73, 0x63, 0x53, 0x53,
-- 0x53, 0x43, 0x43, 0x43, 0x43, 0x43};
-- static const char r59_bt_rev[] = {0x0e, 0x0e,
-- 0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09,
-- 0x07, 0x07, 0x07, 0x07, 0x07, 0x07};
--
-- rt2800_rfcsr_write(rt2x00dev, 55,
-- r55_bt_rev[idx]);
-- rt2800_rfcsr_write(rt2x00dev, 59,
-- r59_bt_rev[idx]);
-- } else {
-- static const char r59_bt[] = {0x8b, 0x8b, 0x8b,
-- 0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89,
-- 0x88, 0x88, 0x86, 0x85, 0x84};
-+ rt2800_rfcsr_write(rt2x00dev, 59, r59_bt[idx]);
-+ }
-+ } else {
-+ if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
-+ static const char r55_nonbt_rev[] = {0x23, 0x23,
-+ 0x23, 0x23, 0x13, 0x13, 0x03, 0x03,
-+ 0x03, 0x03, 0x03, 0x03, 0x03, 0x03};
-+ static const char r59_nonbt_rev[] = {0x07, 0x07,
-+ 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-+ 0x07, 0x07, 0x06, 0x05, 0x04, 0x04};
-+
-+ rt2800_rfcsr_write(rt2x00dev, 55,
-+ r55_nonbt_rev[idx]);
-+ rt2800_rfcsr_write(rt2x00dev, 59,
-+ r59_nonbt_rev[idx]);
-+ } else if (rt2x00_rt(rt2x00dev, RT5390) ||
-+ rt2x00_rt(rt2x00dev, RT5392) ||
-+ rt2x00_rt(rt2x00dev, RT6352)) {
-+ static const char r59_non_bt[] = {0x8f, 0x8f,
-+ 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
-+ 0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
-+
-+ rt2800_rfcsr_write(rt2x00dev, 59,
-+ r59_non_bt[idx]);
-+ } else if (rt2x00_rt(rt2x00dev, RT5350)) {
-+ static const char r59_non_bt[] = {0x0b, 0x0b,
-+ 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0a,
-+ 0x0a, 0x09, 0x08, 0x07, 0x07, 0x06};
-
-- rt2800_rfcsr_write(rt2x00dev, 59, r59_bt[idx]);
-- }
-- } else {
-- if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
-- static const char r55_nonbt_rev[] = {0x23, 0x23,
-- 0x23, 0x23, 0x13, 0x13, 0x03, 0x03,
-- 0x03, 0x03, 0x03, 0x03, 0x03, 0x03};
-- static const char r59_nonbt_rev[] = {0x07, 0x07,
-- 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-- 0x07, 0x07, 0x06, 0x05, 0x04, 0x04};
--
-- rt2800_rfcsr_write(rt2x00dev, 55,
-- r55_nonbt_rev[idx]);
-- rt2800_rfcsr_write(rt2x00dev, 59,
-- r59_nonbt_rev[idx]);
-- } else if (rt2x00_rt(rt2x00dev, RT5390) ||
-- rt2x00_rt(rt2x00dev, RT5392) ||
-- rt2x00_rt(rt2x00dev, RT6352)) {
-- static const char r59_non_bt[] = {0x8f, 0x8f,
-- 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
-- 0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
--
-- rt2800_rfcsr_write(rt2x00dev, 59,
-- r59_non_bt[idx]);
-- } else if (rt2x00_rt(rt2x00dev, RT5350)) {
-- static const char r59_non_bt[] = {0x0b, 0x0b,
-- 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0a,
-- 0x0a, 0x09, 0x08, 0x07, 0x07, 0x06};
--
-- rt2800_rfcsr_write(rt2x00dev, 59,
-- r59_non_bt[idx]);
-- }
-+ rt2800_rfcsr_write(rt2x00dev, 59,
-+ r59_non_bt[idx]);
- }
- }
- }
diff --git a/package/kernel/mac80211/patches/rt2x00/016-rt2x00-remove-confusing-AGC-register.patch b/package/kernel/mac80211/patches/rt2x00/016-rt2x00-remove-confusing-AGC-register.patch
deleted file mode 100644
index 8f3791d2ce..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/016-rt2x00-remove-confusing-AGC-register.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 5991a2ecd070ce5ef646b4e8e0bc8d99110604ed Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Tomislav=20Po=C5=BEega?= <pozega.tomislav@gmail.com>
-Date: Wed, 13 Feb 2019 11:09:13 +0100
-Subject: [PATCH 16/28] rt2x00: remove confusing AGC register
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Register 66 was causing issues on RT6352 if set to the same value as
-in MTK driver. With 1c reg value device was working fine in both HT20
-and HT40 modes.
-
-Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 +-----
- 1 file changed, 1 insertion(+), 5 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3983,11 +3983,7 @@ static void rt2800_config_channel(struct
- rt2800_bbp_write(rt2x00dev, 196, reg);
-
- /* AGC init */
-- if (rt2x00_rt(rt2x00dev, RT6352))
-- reg = 0x04;
-- else
-- reg = rf->channel <= 14 ? 0x1c : 0x24;
--
-+ reg = rf->channel <= 14 ? 0x1c : 0x24;
- reg += 2 * rt2x00dev->lna_gain;
- rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
-
diff --git a/package/kernel/mac80211/patches/rt2x00/017-rt2800-enable-TX_PIN_CFG_LNA_PE_-bits-per-band.patch b/package/kernel/mac80211/patches/rt2x00/017-rt2800-enable-TX_PIN_CFG_LNA_PE_-bits-per-band.patch
deleted file mode 100644
index eb82d6275b..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/017-rt2800-enable-TX_PIN_CFG_LNA_PE_-bits-per-band.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 9ad3b55654455258a9463384edb40077439d879f Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 13 Feb 2019 11:09:14 +0100
-Subject: [PATCH 17/28] rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band
-
-Do not enable TX_PIN_CFG_LNA_PE_A* bits for 2.4GHz band and
-vice versa TX_PIN_CFG_LNA_PE_G* bits for 5GHz.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 18 ++++++++++++------
- 1 file changed, 12 insertions(+), 6 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3893,18 +3893,24 @@ static void rt2800_config_channel(struct
- switch (rt2x00dev->default_ant.rx_chain_num) {
- case 3:
- /* Turn on tertiary LNAs */
-- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
-- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN,
-+ rf->channel > 14);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN,
-+ rf->channel <= 14);
- /* fall-through */
- case 2:
- /* Turn on secondary LNAs */
-- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN,
-+ rf->channel > 14);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN,
-+ rf->channel <= 14);
- /* fall-through */
- case 1:
- /* Turn on primary LNAs */
-- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN,
-+ rf->channel > 14);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN,
-+ rf->channel <= 14);
- break;
- }
-
diff --git a/package/kernel/mac80211/patches/rt2x00/018-rt2800-enable-TX_PIN_CFG_RFRX_EN-only-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/018-rt2800-enable-TX_PIN_CFG_RFRX_EN-only-for-MT7620.patch
deleted file mode 100644
index 3a4c2cd8e5..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/018-rt2800-enable-TX_PIN_CFG_RFRX_EN-only-for-MT7620.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 7aca14885edeab536a8cbe1e7cfeadd4c3310b9b Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 13 Feb 2019 11:09:15 +0100
-Subject: [PATCH 18/28] rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620
-
-The TX_PIN_CFG_RFRX_EN bit was not set on other devices than MT7620,
-restore old behavaviour since setting this bit maight not be
-correct for older devices.
-
-Fixes: 41977e86c984 ("rt2x00: add support for MT7620")
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3858,10 +3858,12 @@ static void rt2800_config_channel(struct
- if (rt2x00_rt(rt2x00dev, RT3572))
- rt2800_rfcsr_write(rt2x00dev, 8, 0);
-
-- if (rt2x00_rt(rt2x00dev, RT6352))
-+ if (rt2x00_rt(rt2x00dev, RT6352)) {
- tx_pin = rt2800_register_read(rt2x00dev, TX_PIN_CFG);
-- else
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFRX_EN, 1);
-+ } else {
- tx_pin = 0;
-+ }
-
- switch (rt2x00dev->default_ant.tx_chain_num) {
- case 3:
-@@ -3916,7 +3918,6 @@ static void rt2800_config_channel(struct
-
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFRX_EN, 1); /* mt7620 */
-
- rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
diff --git a/package/kernel/mac80211/patches/rt2x00/019-rt2800-comment-and-simplify-AGC-init-for-RT6352.patch b/package/kernel/mac80211/patches/rt2x00/019-rt2800-comment-and-simplify-AGC-init-for-RT6352.patch
deleted file mode 100644
index 4d0beb263d..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/019-rt2800-comment-and-simplify-AGC-init-for-RT6352.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From c7ff1bfeaf1ca69e3e401be211b55d1738d0c5fc Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 13 Feb 2019 11:09:16 +0100
-Subject: [PATCH 19/28] rt2800: comment and simplify AGC init for RT6352
-
-We do not need separate lines for calculating register values.
-Also add comment that value is different than in vendor driver.
-
-Suggested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3989,9 +3989,12 @@ static void rt2800_config_channel(struct
- rt2800_bbp_write(rt2x00dev, 195, 141);
- rt2800_bbp_write(rt2x00dev, 196, reg);
-
-- /* AGC init */
-- reg = rf->channel <= 14 ? 0x1c : 0x24;
-- reg += 2 * rt2x00dev->lna_gain;
-+ /* AGC init.
-+ * Despite the vendor driver using different values here for
-+ * RT6352 chip, we use 0x1c for now. This may have to be changed
-+ * once TSSI got implemented.
-+ */
-+ reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain;
- rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
-
- rt2800_iq_calibrate(rt2x00dev, rf->channel);
diff --git a/package/kernel/mac80211/patches/rt2x00/020-cfg80211-add-ratelimited-variants-of-err-and-warn.patch b/package/kernel/mac80211/patches/rt2x00/020-cfg80211-add-ratelimited-variants-of-err-and-warn.patch
deleted file mode 100644
index bea1884489..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/020-cfg80211-add-ratelimited-variants-of-err-and-warn.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From patchwork Tue Mar 12 09:51:40 2019
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10848957
-X-Patchwork-Delegate: johannes@sipsolutions.net
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-To: linux-wireless@vger.kernel.org
-Cc: =?utf-8?q?Tomislav_Po=C5=BEega?= <pozega.tomislav@gmail.com>,
- Daniel Golle <daniel@makrotopia.org>, Felix Fietkau <nbd@nbd.name>,
- Mathias Kresin <dev@kresin.me>
-Subject: [PATCH v3 1/4] cfg80211: add ratelimited variants of err and warn
-Date: Tue, 12 Mar 2019 10:51:40 +0100
-Message-Id: <1552384303-29529-2-git-send-email-sgruszka@redhat.com>
-In-Reply-To: <1552384303-29529-1-git-send-email-sgruszka@redhat.com>
-References: <1552384303-29529-1-git-send-email-sgruszka@redhat.com>
-
-wiphy_{err,warn}_ratelimited will be used by rt2x00
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- include/net/cfg80211.h | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/include/net/cfg80211.h
-+++ b/include/net/cfg80211.h
-@@ -6597,6 +6597,11 @@ int cfg80211_external_auth_request(struc
- #define wiphy_info(wiphy, format, args...) \
- dev_info(&(wiphy)->dev, format, ##args)
-
-+#define wiphy_err_ratelimited(wiphy, format, args...) \
-+ dev_err_ratelimited(&(wiphy)->dev, format, ##args)
-+#define wiphy_warn_ratelimited(wiphy, format, args...) \
-+ dev_warn_ratelimited(&(wiphy)->dev, format, ##args)
-+
- #define wiphy_debug(wiphy, format, args...) \
- wiphy_printk(KERN_DEBUG, wiphy, format, ##args)
-
diff --git a/package/kernel/mac80211/patches/rt2x00/021-rt2x00-use-ratelimited-variants-dev_warn-dev_err.patch b/package/kernel/mac80211/patches/rt2x00/021-rt2x00-use-ratelimited-variants-dev_warn-dev_err.patch
deleted file mode 100644
index 2d74a71e1f..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/021-rt2x00-use-ratelimited-variants-dev_warn-dev_err.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From patchwork Tue Mar 12 09:51:41 2019
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10848959
-X-Patchwork-Delegate: kvalo@adurom.com
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-To: linux-wireless@vger.kernel.org
-Cc: =?utf-8?q?Tomislav_Po=C5=BEega?= <pozega.tomislav@gmail.com>,
- Daniel Golle <daniel@makrotopia.org>, Felix Fietkau <nbd@nbd.name>,
- Mathias Kresin <dev@kresin.me>
-Subject: [PATCH v3 2/4] rt2x00: use ratelimited variants dev_warn/dev_err
-Date: Tue, 12 Mar 2019 10:51:41 +0100
-Message-Id: <1552384303-29529-3-git-send-email-sgruszka@redhat.com>
-In-Reply-To: <1552384303-29529-1-git-send-email-sgruszka@redhat.com>
-References: <1552384303-29529-1-git-send-email-sgruszka@redhat.com>
-
-As reported by Randy we can overwhelm logs on some USB error conditions.
-To avoid that use dev_warn_ratelimited() and dev_err_ratelimitd().
-
-Reported-and-tested-by: Randy Oostdyk <linux-kernel@oostdyk.com>
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -69,10 +69,10 @@
- printk(KERN_ERR KBUILD_MODNAME ": %s: Error - " fmt, \
- __func__, ##__VA_ARGS__)
- #define rt2x00_err(dev, fmt, ...) \
-- wiphy_err((dev)->hw->wiphy, "%s: Error - " fmt, \
-+ wiphy_err_ratelimited((dev)->hw->wiphy, "%s: Error - " fmt, \
- __func__, ##__VA_ARGS__)
- #define rt2x00_warn(dev, fmt, ...) \
-- wiphy_warn((dev)->hw->wiphy, "%s: Warning - " fmt, \
-+ wiphy_warn_ratelimited((dev)->hw->wiphy, "%s: Warning - " fmt, \
- __func__, ##__VA_ARGS__)
- #define rt2x00_info(dev, fmt, ...) \
- wiphy_info((dev)->hw->wiphy, "%s: Info - " fmt, \
diff --git a/package/kernel/mac80211/patches/rt2x00/022-rt2x00-check-number-of-EPROTO-errors.patch b/package/kernel/mac80211/patches/rt2x00/022-rt2x00-check-number-of-EPROTO-errors.patch
deleted file mode 100644
index 251ac287bf..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/022-rt2x00-check-number-of-EPROTO-errors.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From patchwork Tue Mar 12 09:51:42 2019
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10848961
-X-Patchwork-Delegate: kvalo@adurom.com
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-To: linux-wireless@vger.kernel.org
-Cc: =?utf-8?q?Tomislav_Po=C5=BEega?= <pozega.tomislav@gmail.com>,
- Daniel Golle <daniel@makrotopia.org>, Felix Fietkau <nbd@nbd.name>,
- Mathias Kresin <dev@kresin.me>
-Subject: [PATCH v3 3/4] rt2x00: check number of EPROTO errors
-Date: Tue, 12 Mar 2019 10:51:42 +0100
-Message-Id: <1552384303-29529-4-git-send-email-sgruszka@redhat.com>
-In-Reply-To: <1552384303-29529-1-git-send-email-sgruszka@redhat.com>
-References: <1552384303-29529-1-git-send-email-sgruszka@redhat.com>
-
-Some USB host devices/drivers on some conditions can always return
-EPROTO error on submitted URBs. That can cause infinity loop in the
-rt2x00 driver.
-
-Since we can have single EPROTO errors we can not mark as device as
-removed to avoid infinity loop. However we can count consecutive
-EPROTO errors and mark device as removed if get lot of it.
-I choose number 10 as threshold.
-
-Reported-and-tested-by: Randy Oostdyk <linux-kernel@oostdyk.com>
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 +
- drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 22 +++++++++++++++++++---
- 2 files changed, 20 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -1017,6 +1017,7 @@ struct rt2x00_dev {
- unsigned int extra_tx_headroom;
-
- struct usb_anchor *anchor;
-+ unsigned int num_proto_errs;
-
- /* Clock for System On Chip devices. */
- struct clk *clk;
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-@@ -31,6 +31,22 @@
- #include "rt2x00.h"
- #include "rt2x00usb.h"
-
-+static bool rt2x00usb_check_usb_error(struct rt2x00_dev *rt2x00dev, int status)
-+{
-+ if (status == -ENODEV || status == -ENOENT)
-+ return true;
-+
-+ if (status == -EPROTO || status == -ETIMEDOUT)
-+ rt2x00dev->num_proto_errs++;
-+ else
-+ rt2x00dev->num_proto_errs = 0;
-+
-+ if (rt2x00dev->num_proto_errs > 3)
-+ return true;
-+
-+ return false;
-+}
-+
- /*
- * Interfacing with the HW.
- */
-@@ -57,7 +73,7 @@ int rt2x00usb_vendor_request(struct rt2x
- if (status >= 0)
- return 0;
-
-- if (status == -ENODEV || status == -ENOENT) {
-+ if (rt2x00usb_check_usb_error(rt2x00dev, status)) {
- /* Device has disappeared. */
- clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
- break;
-@@ -321,7 +337,7 @@ static bool rt2x00usb_kick_tx_entry(stru
-
- status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
- if (status) {
-- if (status == -ENODEV || status == -ENOENT)
-+ if (rt2x00usb_check_usb_error(rt2x00dev, status))
- clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
- set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
- rt2x00lib_dmadone(entry);
-@@ -410,7 +426,7 @@ static bool rt2x00usb_kick_rx_entry(stru
-
- status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
- if (status) {
-- if (status == -ENODEV || status == -ENOENT)
-+ if (rt2x00usb_check_usb_error(rt2x00dev, status))
- clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
- set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
- rt2x00lib_dmadone(entry);
diff --git a/package/kernel/mac80211/patches/rt2x00/023-rt2x00-do-not-print-error-when-queue-is-full.patch b/package/kernel/mac80211/patches/rt2x00/023-rt2x00-do-not-print-error-when-queue-is-full.patch
deleted file mode 100644
index 7e2f2193be..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/023-rt2x00-do-not-print-error-when-queue-is-full.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From patchwork Tue Mar 12 09:51:43 2019
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10848963
-X-Patchwork-Delegate: kvalo@adurom.com
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-To: linux-wireless@vger.kernel.org
-Cc: =?utf-8?q?Tomislav_Po=C5=BEega?= <pozega.tomislav@gmail.com>,
- Daniel Golle <daniel@makrotopia.org>, Felix Fietkau <nbd@nbd.name>,
- Mathias Kresin <dev@kresin.me>
-Subject: [PATCH v3 4/4] rt2x00: do not print error when queue is full
-Date: Tue, 12 Mar 2019 10:51:43 +0100
-Message-Id: <1552384303-29529-5-git-send-email-sgruszka@redhat.com>
-In-Reply-To: <1552384303-29529-1-git-send-email-sgruszka@redhat.com>
-References: <1552384303-29529-1-git-send-email-sgruszka@redhat.com>
-
-For unknown reasons printk() on some context can cause CPU hung on
-embedded MT7620 AP/router MIPS platforms. What can result on wifi
-disconnects.
-
-This patch move queue full messages to debug level what is consistent
-with other mac80211 drivers which drop packet silently if tx queue is
-full. This make MT7620 OpenWRT routers more stable, what was reported
-by various users.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-@@ -671,7 +671,7 @@ int rt2x00queue_write_tx_frame(struct da
- spin_lock(&queue->tx_lock);
-
- if (unlikely(rt2x00queue_full(queue))) {
-- rt2x00_err(queue->rt2x00dev, "Dropping frame due to full tx queue %d\n",
-+ rt2x00_dbg(queue->rt2x00dev, "Dropping frame due to full tx queue %d\n",
- queue->qid);
- ret = -ENOBUFS;
- goto out;
diff --git a/package/kernel/mac80211/patches/rt2x00/024-rt2800-partially-restore-old-mmio-txstatus-behaviour.patch b/package/kernel/mac80211/patches/rt2x00/024-rt2800-partially-restore-old-mmio-txstatus-behaviour.patch
deleted file mode 100644
index 52314a79ae..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/024-rt2800-partially-restore-old-mmio-txstatus-behaviour.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 91a5340db0526b7263bc8da14b120ea3129b5f28 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Sat, 9 Feb 2019 12:08:31 +0100
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10804437
-X-Patchwork-Delegate: kvalo@adurom.com
-Subject: [PATCH 21/28] rt2800: partially restore old mmio txstatus behaviour
-
-Do not disable txstatus interrupt and add quota of processed tx statuses in
-one tasklet. Quota is needed to allow to fed device with new frames during
-processing of tx statuses.
-
-Patch fixes about 15% performance degradation on some scenarios coused by
-0b0d556e0ebb ("rt2800mmio: use txdone/txstatus routines from lib").
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 4 +--
- .../net/wireless/ralink/rt2x00/rt2800lib.h | 2 +-
- .../net/wireless/ralink/rt2x00/rt2800mmio.c | 30 +++++--------------
- .../net/wireless/ralink/rt2x00/rt2800usb.c | 2 +-
- 4 files changed, 12 insertions(+), 26 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -1100,7 +1100,7 @@ void rt2800_txdone_entry(struct queue_en
- }
- EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
-
--void rt2800_txdone(struct rt2x00_dev *rt2x00dev)
-+void rt2800_txdone(struct rt2x00_dev *rt2x00dev, unsigned int quota)
- {
- struct data_queue *queue;
- struct queue_entry *entry;
-@@ -1108,7 +1108,7 @@ void rt2800_txdone(struct rt2x00_dev *rt
- u8 qid;
- bool match;
-
-- while (kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
-+ while (quota-- > 0 && kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
- /*
- * TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is
- * guaranteed to be one of the TX QIDs .
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -195,7 +195,7 @@ void rt2800_process_rxwi(struct queue_en
-
- void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
- bool match);
--void rt2800_txdone(struct rt2x00_dev *rt2x00dev);
-+void rt2800_txdone(struct rt2x00_dev *rt2x00dev, unsigned int quota);
- void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev);
- bool rt2800_txstatus_timeout(struct rt2x00_dev *rt2x00dev);
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-@@ -255,20 +255,6 @@ void rt2800mmio_autowake_tasklet(unsigne
- }
- EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet);
-
--static void rt2800mmio_txdone(struct rt2x00_dev *rt2x00dev)
--{
-- bool timeout = false;
--
-- while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
-- (timeout = rt2800_txstatus_timeout(rt2x00dev))) {
--
-- rt2800_txdone(rt2x00dev);
--
-- if (timeout)
-- rt2800_txdone_nostatus(rt2x00dev);
-- }
--}
--
- static bool rt2800mmio_fetch_txstatus(struct rt2x00_dev *rt2x00dev)
- {
- u32 status;
-@@ -305,14 +291,11 @@ void rt2800mmio_txstatus_tasklet(unsigne
- {
- struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
-
-- do {
-- rt2800mmio_txdone(rt2x00dev);
-+ rt2800_txdone(rt2x00dev, 16);
-
-- } while (rt2800mmio_fetch_txstatus(rt2x00dev));
-+ if (!kfifo_is_empty(&rt2x00dev->txstatus_fifo))
-+ tasklet_schedule(&rt2x00dev->txstatus_tasklet);
-
-- if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-- rt2800mmio_enable_interrupt(rt2x00dev,
-- INT_SOURCE_CSR_TX_FIFO_STATUS);
- }
- EXPORT_SYMBOL_GPL(rt2800mmio_txstatus_tasklet);
-
-@@ -339,8 +322,10 @@ irqreturn_t rt2800mmio_interrupt(int irq
- mask = ~reg;
-
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
-+ rt2x00_set_field32(&mask, INT_MASK_CSR_TX_FIFO_STATUS, 1);
- rt2800mmio_fetch_txstatus(rt2x00dev);
-- tasklet_schedule(&rt2x00dev->txstatus_tasklet);
-+ if (!kfifo_is_empty(&rt2x00dev->txstatus_fifo))
-+ tasklet_schedule(&rt2x00dev->txstatus_tasklet);
- }
-
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
-@@ -500,7 +485,8 @@ void rt2800mmio_flush_queue(struct data_
- */
- if (tx_queue) {
- tasklet_disable(&rt2x00dev->txstatus_tasklet);
-- rt2800mmio_txdone(rt2x00dev);
-+ rt2800_txdone(rt2x00dev, UINT_MAX);
-+ rt2800_txdone_nostatus(rt2x00dev);
- tasklet_enable(&rt2x00dev->txstatus_tasklet);
- }
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-@@ -480,7 +480,7 @@ static void rt2800usb_work_txdone(struct
- while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
- rt2800_txstatus_timeout(rt2x00dev)) {
-
-- rt2800_txdone(rt2x00dev);
-+ rt2800_txdone(rt2x00dev, UINT_MAX);
-
- rt2800_txdone_nostatus(rt2x00dev);
-
diff --git a/package/kernel/mac80211/patches/rt2x00/025-rt2800-new-flush-implementation-for-SoC-devices.patch b/package/kernel/mac80211/patches/rt2x00/025-rt2800-new-flush-implementation-for-SoC-devices.patch
deleted file mode 100644
index e3a914a0fa..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/025-rt2800-new-flush-implementation-for-SoC-devices.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 11f8ad1656035176bad9d89de7ea0e7fe6d82c32 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Sat, 9 Feb 2019 12:08:32 +0100
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10804439
-X-Patchwork-Delegate: kvalo@adurom.com
-Subject: [PATCH 22/28] rt2800: new flush implementation for SoC devices
-
-Use new flush_queue() calback for SoC devices, what was already done for
-PCIe devices.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
-@@ -203,7 +203,7 @@ static const struct rt2x00lib_ops rt2800
- .start_queue = rt2800mmio_start_queue,
- .kick_queue = rt2800mmio_kick_queue,
- .stop_queue = rt2800mmio_stop_queue,
-- .flush_queue = rt2x00mmio_flush_queue,
-+ .flush_queue = rt2800mmio_flush_queue,
- .write_tx_desc = rt2800mmio_write_tx_desc,
- .write_tx_data = rt2800_write_tx_data,
- .write_beacon = rt2800_write_beacon,
diff --git a/package/kernel/mac80211/patches/rt2x00/026-rt2800-move-txstatus-pending-routine.patch b/package/kernel/mac80211/patches/rt2x00/026-rt2800-move-txstatus-pending-routine.patch
deleted file mode 100644
index e5bfbecd1e..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/026-rt2800-move-txstatus-pending-routine.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 2bbea7645c3d095014a080db170941818650e141 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Sat, 9 Feb 2019 12:08:33 +0100
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10804441
-X-Patchwork-Delegate: kvalo@adurom.com
-Subject: [PATCH 23/28] rt2800: move txstatus pending routine
-
-Move rt2800usb_txstatus_pending routine to rt2800lib. It will be reused
-by rt2800mmio code.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 17 ++++++++++++++
- .../net/wireless/ralink/rt2x00/rt2800lib.h | 1 +
- .../net/wireless/ralink/rt2x00/rt2800usb.c | 22 +++----------------
- 3 files changed, 21 insertions(+), 19 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -1183,6 +1183,23 @@ bool rt2800_txstatus_timeout(struct rt2x
- }
- EXPORT_SYMBOL_GPL(rt2800_txstatus_timeout);
-
-+/*
-+ * test if there is an entry in any TX queue for which DMA is done
-+ * but the TX status has not been returned yet
-+ */
-+bool rt2800_txstatus_pending(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct data_queue *queue;
-+
-+ tx_queue_for_each(rt2x00dev, queue) {
-+ if (rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE) !=
-+ rt2x00queue_get_entry(queue, Q_INDEX_DONE))
-+ return true;
-+ }
-+ return false;
-+}
-+EXPORT_SYMBOL_GPL(rt2800_txstatus_pending);
-+
- void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
- {
- struct data_queue *queue;
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -198,6 +198,7 @@ void rt2800_txdone_entry(struct queue_en
- void rt2800_txdone(struct rt2x00_dev *rt2x00dev, unsigned int quota);
- void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev);
- bool rt2800_txstatus_timeout(struct rt2x00_dev *rt2x00dev);
-+bool rt2800_txstatus_pending(struct rt2x00_dev *rt2x00dev);
-
- void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
- void rt2800_clear_beacon(struct queue_entry *entry);
---- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-@@ -100,22 +100,6 @@ static void rt2800usb_stop_queue(struct
- }
- }
-
--/*
-- * test if there is an entry in any TX queue for which DMA is done
-- * but the TX status has not been returned yet
-- */
--static bool rt2800usb_txstatus_pending(struct rt2x00_dev *rt2x00dev)
--{
-- struct data_queue *queue;
--
-- tx_queue_for_each(rt2x00dev, queue) {
-- if (rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE) !=
-- rt2x00queue_get_entry(queue, Q_INDEX_DONE))
-- return true;
-- }
-- return false;
--}
--
- #define TXSTATUS_READ_INTERVAL 1000000
-
- static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
-@@ -145,7 +129,7 @@ static bool rt2800usb_tx_sta_fifo_read_c
- if (rt2800_txstatus_timeout(rt2x00dev))
- queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
-
-- if (rt2800usb_txstatus_pending(rt2x00dev)) {
-+ if (rt2800_txstatus_pending(rt2x00dev)) {
- /* Read register after 1 ms */
- hrtimer_start(&rt2x00dev->txstatus_timer,
- TXSTATUS_READ_INTERVAL,
-@@ -160,7 +144,7 @@ stop_reading:
- * clear_bit someone could do rt2x00usb_interrupt_txdone, so recheck
- * here again if status reading is needed.
- */
-- if (rt2800usb_txstatus_pending(rt2x00dev) &&
-+ if (rt2800_txstatus_pending(rt2x00dev) &&
- !test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
- return true;
- else
-@@ -489,7 +473,7 @@ static void rt2800usb_work_txdone(struct
- * if the medium is busy, thus the TX_STA_FIFO entry is
- * also delayed -> use a timer to retrieve it.
- */
-- if (rt2800usb_txstatus_pending(rt2x00dev))
-+ if (rt2800_txstatus_pending(rt2x00dev))
- rt2800usb_async_read_tx_status(rt2x00dev);
- }
- }
diff --git a/package/kernel/mac80211/patches/rt2x00/027-rt2800mmio-fetch-tx-status-changes.patch b/package/kernel/mac80211/patches/rt2x00/027-rt2800mmio-fetch-tx-status-changes.patch
deleted file mode 100644
index 4bb62c2288..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/027-rt2800mmio-fetch-tx-status-changes.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From f6a9618198e190a2ba09ce3f0aa8e9ee1763bd38 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Sat, 9 Feb 2019 12:08:34 +0100
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10804443
-X-Patchwork-Delegate: kvalo@adurom.com
-Subject: [PATCH 24/28] rt2800mmio: fetch tx status changes
-
-Prepare to use rt2800mmio_fetch_txstatus() in concurrent manner and drop
-return value since is not longer needed.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 17 +++++++++--------
- 1 file changed, 9 insertions(+), 8 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-@@ -255,12 +255,12 @@ void rt2800mmio_autowake_tasklet(unsigne
- }
- EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet);
-
--static bool rt2800mmio_fetch_txstatus(struct rt2x00_dev *rt2x00dev)
-+static void rt2800mmio_fetch_txstatus(struct rt2x00_dev *rt2x00dev)
- {
- u32 status;
-- bool more = false;
-+ unsigned long flags;
-
-- /* FIXEME: rewrite this comment
-+ /*
- * The TX_FIFO_STATUS interrupt needs special care. We should
- * read TX_STA_FIFO but we should do it immediately as otherwise
- * the register can overflow and we would lose status reports.
-@@ -271,20 +271,21 @@ static bool rt2800mmio_fetch_txstatus(st
- * because we can schedule the tasklet multiple times (when the
- * interrupt fires again during tx status processing).
- *
-- * txstatus tasklet is called with INT_SOURCE_CSR_TX_FIFO_STATUS
-- * disabled so have only one producer and one consumer - we don't
-- * need to lock the kfifo.
-+ * We also read statuses from tx status timeout timer, use
-+ * lock to prevent concurent writes to fifo.
- */
-+
-+ spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
-+
- while (!kfifo_is_full(&rt2x00dev->txstatus_fifo)) {
- status = rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO);
- if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID))
- break;
-
- kfifo_put(&rt2x00dev->txstatus_fifo, status);
-- more = true;
- }
-
-- return more;
-+ spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
- }
-
- void rt2800mmio_txstatus_tasklet(unsigned long data)
diff --git a/package/kernel/mac80211/patches/rt2x00/028-rt2800mmio-use-timer-and-work-for-handling-tx-status.patch b/package/kernel/mac80211/patches/rt2x00/028-rt2800mmio-use-timer-and-work-for-handling-tx-status.patch
deleted file mode 100644
index bf038a5991..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/028-rt2800mmio-use-timer-and-work-for-handling-tx-status.patch
+++ /dev/null
@@ -1,194 +0,0 @@
-From 175c2548332b45b144af673e70fdbb1a947d7aba Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Sat, 9 Feb 2019 12:08:35 +0100
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10804445
-X-Patchwork-Delegate: kvalo@adurom.com
-Subject: [PATCH 25/28] rt2800mmio: use timer and work for handling tx statuses
- timeouts
-
-Sometimes we can get into situation when there are pending statuses,
-but we do not get INT_SOURCE_CSR_TX_FIFO_STATUS. Handle this situation
-by arming timeout timer and read statuses (it will fix case when
-we just do not have irq) and queue work to handle case we missed
-statues from hardware FIFO.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- .../net/wireless/ralink/rt2x00/rt2800mmio.c | 81 +++++++++++++++++--
- .../net/wireless/ralink/rt2x00/rt2800mmio.h | 1 +
- .../net/wireless/ralink/rt2x00/rt2800pci.c | 2 +-
- .../net/wireless/ralink/rt2x00/rt2800soc.c | 2 +-
- .../net/wireless/ralink/rt2x00/rt2x00dev.c | 4 +
- 5 files changed, 82 insertions(+), 8 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
-@@ -426,6 +426,9 @@ void rt2800mmio_start_queue(struct data_
- }
- EXPORT_SYMBOL_GPL(rt2800mmio_start_queue);
-
-+/* 200 ms */
-+#define TXSTATUS_TIMEOUT 200000000
-+
- void rt2800mmio_kick_queue(struct data_queue *queue)
- {
- struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-@@ -440,6 +443,8 @@ void rt2800mmio_kick_queue(struct data_q
- entry = rt2x00queue_get_entry(queue, Q_INDEX);
- rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX(queue->qid),
- entry->entry_idx);
-+ hrtimer_start(&rt2x00dev->txstatus_timer,
-+ TXSTATUS_TIMEOUT, HRTIMER_MODE_REL);
- break;
- case QID_MGMT:
- entry = rt2x00queue_get_entry(queue, Q_INDEX);
-@@ -484,12 +489,8 @@ void rt2800mmio_flush_queue(struct data_
- * For TX queues schedule completion tasklet to catch
- * tx status timeouts, othewise just wait.
- */
-- if (tx_queue) {
-- tasklet_disable(&rt2x00dev->txstatus_tasklet);
-- rt2800_txdone(rt2x00dev, UINT_MAX);
-- rt2800_txdone_nostatus(rt2x00dev);
-- tasklet_enable(&rt2x00dev->txstatus_tasklet);
-- }
-+ if (tx_queue)
-+ queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
-
- /*
- * Wait for a little while to give the driver
-@@ -627,6 +628,10 @@ void rt2800mmio_clear_entry(struct queue
- word = rt2x00_desc_read(entry_priv->desc, 1);
- rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1);
- rt2x00_desc_write(entry_priv->desc, 1, word);
-+
-+ /* If last entry stop txstatus timer */
-+ if (entry->queue->length == 1)
-+ hrtimer_cancel(&rt2x00dev->txstatus_timer);
- }
- }
- EXPORT_SYMBOL_GPL(rt2800mmio_clear_entry);
-@@ -759,6 +764,70 @@ int rt2800mmio_enable_radio(struct rt2x0
- }
- EXPORT_SYMBOL_GPL(rt2800mmio_enable_radio);
-
-+static void rt2800mmio_work_txdone(struct work_struct *work)
-+{
-+ struct rt2x00_dev *rt2x00dev =
-+ container_of(work, struct rt2x00_dev, txdone_work);
-+
-+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-+ return;
-+
-+ while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
-+ rt2800_txstatus_timeout(rt2x00dev)) {
-+
-+ tasklet_disable(&rt2x00dev->txstatus_tasklet);
-+ rt2800_txdone(rt2x00dev, UINT_MAX);
-+ rt2800_txdone_nostatus(rt2x00dev);
-+ tasklet_enable(&rt2x00dev->txstatus_tasklet);
-+ }
-+
-+ if (rt2800_txstatus_pending(rt2x00dev))
-+ hrtimer_start(&rt2x00dev->txstatus_timer,
-+ TXSTATUS_TIMEOUT, HRTIMER_MODE_REL);
-+}
-+
-+static enum hrtimer_restart rt2800mmio_tx_sta_fifo_timeout(struct hrtimer *timer)
-+{
-+ struct rt2x00_dev *rt2x00dev =
-+ container_of(timer, struct rt2x00_dev, txstatus_timer);
-+
-+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-+ goto out;
-+
-+ if (!rt2800_txstatus_pending(rt2x00dev))
-+ goto out;
-+
-+ rt2800mmio_fetch_txstatus(rt2x00dev);
-+ if (!kfifo_is_empty(&rt2x00dev->txstatus_fifo))
-+ tasklet_schedule(&rt2x00dev->txstatus_tasklet);
-+ else
-+ queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
-+out:
-+ return HRTIMER_NORESTART;
-+}
-+
-+int rt2800mmio_probe_hw(struct rt2x00_dev *rt2x00dev)
-+{
-+ int retval;
-+
-+ retval = rt2800_probe_hw(rt2x00dev);
-+ if (retval)
-+ return retval;
-+
-+ /*
-+ * Set txstatus timer function.
-+ */
-+ rt2x00dev->txstatus_timer.function = rt2800mmio_tx_sta_fifo_timeout;
-+
-+ /*
-+ * Overwrite TX done handler
-+ */
-+ INIT_WORK(&rt2x00dev->txdone_work, rt2800mmio_work_txdone);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(rt2800mmio_probe_hw);
-+
- MODULE_AUTHOR(DRV_PROJECT);
- MODULE_VERSION(DRV_VERSION);
- MODULE_DESCRIPTION("rt2800 MMIO library");
---- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
-@@ -153,6 +153,7 @@ void rt2800mmio_stop_queue(struct data_q
- void rt2800mmio_queue_init(struct data_queue *queue);
-
- /* Initialization functions */
-+int rt2800mmio_probe_hw(struct rt2x00_dev *rt2x00dev);
- bool rt2800mmio_get_entry_state(struct queue_entry *entry);
- void rt2800mmio_clear_entry(struct queue_entry *entry);
- int rt2800mmio_init_queues(struct rt2x00_dev *rt2x00dev);
---- a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
-@@ -346,7 +346,7 @@ static const struct rt2x00lib_ops rt2800
- .tbtt_tasklet = rt2800mmio_tbtt_tasklet,
- .rxdone_tasklet = rt2800mmio_rxdone_tasklet,
- .autowake_tasklet = rt2800mmio_autowake_tasklet,
-- .probe_hw = rt2800_probe_hw,
-+ .probe_hw = rt2800mmio_probe_hw,
- .get_firmware_name = rt2800pci_get_firmware_name,
- .check_firmware = rt2800_check_firmware,
- .load_firmware = rt2800_load_firmware,
---- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
-@@ -185,7 +185,7 @@ static const struct rt2x00lib_ops rt2800
- .tbtt_tasklet = rt2800mmio_tbtt_tasklet,
- .rxdone_tasklet = rt2800mmio_rxdone_tasklet,
- .autowake_tasklet = rt2800mmio_autowake_tasklet,
-- .probe_hw = rt2800_probe_hw,
-+ .probe_hw = rt2800mmio_probe_hw,
- .get_firmware_name = rt2800soc_get_firmware_name,
- .check_firmware = rt2800soc_check_firmware,
- .load_firmware = rt2800soc_load_firmware,
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1391,6 +1391,8 @@ int rt2x00lib_probe_dev(struct rt2x00_de
- mutex_init(&rt2x00dev->conf_mutex);
- INIT_LIST_HEAD(&rt2x00dev->bar_list);
- spin_lock_init(&rt2x00dev->bar_list_lock);
-+ hrtimer_init(&rt2x00dev->txstatus_timer, CLOCK_MONOTONIC,
-+ HRTIMER_MODE_REL);
-
- set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
-
-@@ -1515,6 +1517,8 @@ void rt2x00lib_remove_dev(struct rt2x00_
- cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
- cancel_work_sync(&rt2x00dev->sleep_work);
-
-+ hrtimer_cancel(&rt2x00dev->txstatus_timer);
-+
- /*
- * Kill the tx status tasklet.
- */
diff --git a/package/kernel/mac80211/patches/rt2x00/029-rt2x00-remove-last_nostatus_check.patch b/package/kernel/mac80211/patches/rt2x00/029-rt2x00-remove-last_nostatus_check.patch
deleted file mode 100644
index 0daaef5e8b..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/029-rt2x00-remove-last_nostatus_check.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 6013a91f15c9dabd668d5736652b9bcfb0ef0378 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Sat, 9 Feb 2019 12:08:36 +0100
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10804447
-X-Patchwork-Delegate: kvalo@adurom.com
-Subject: [PATCH 26/28] rt2x00: remove last_nostatus_check
-
-We do not any longer check txstatus timeout from tasklet, so do not need
-this optimization.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 9 ---------
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 2 --
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 1 -
- 3 files changed, 12 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -1164,15 +1164,6 @@ bool rt2800_txstatus_timeout(struct rt2x
- struct data_queue *queue;
- struct queue_entry *entry;
-
-- if (!test_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags)) {
-- unsigned long tout = msecs_to_jiffies(1000);
--
-- if (time_before(jiffies, rt2x00dev->last_nostatus_check + tout))
-- return false;
-- }
--
-- rt2x00dev->last_nostatus_check = jiffies;
--
- tx_queue_for_each(rt2x00dev, queue) {
- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
- if (rt2800_entry_txstatus_timeout(rt2x00dev, entry))
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -981,8 +981,6 @@ struct rt2x00_dev {
- */
- DECLARE_KFIFO_PTR(txstatus_fifo, u32);
-
-- unsigned long last_nostatus_check;
--
- /*
- * Timer to ensure tx status reports are read (rt2800usb).
- */
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-@@ -1039,7 +1039,6 @@ void rt2x00queue_start_queues(struct rt2
- */
- tx_queue_for_each(rt2x00dev, queue)
- rt2x00queue_start_queue(queue);
-- rt2x00dev->last_nostatus_check = jiffies;
-
- rt2x00queue_start_queue(rt2x00dev->rx);
- }
diff --git a/package/kernel/mac80211/patches/rt2x00/030-rt2x00-remove-not-used-entry-field.patch b/package/kernel/mac80211/patches/rt2x00/030-rt2x00-remove-not-used-entry-field.patch
deleted file mode 100644
index 53134a5bc3..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/030-rt2x00-remove-not-used-entry-field.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 2758f09b22bc08e89e0391486b2d707ad2479599 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Sat, 9 Feb 2019 12:08:37 +0100
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10804449
-X-Patchwork-Delegate: kvalo@adurom.com
-Subject: [PATCH 27/28] rt2x00: remove not used entry field
-
-Remove not used any longer queue_entry field and flag.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-@@ -361,7 +361,6 @@ enum queue_entry_flags {
- ENTRY_DATA_PENDING,
- ENTRY_DATA_IO_FAILED,
- ENTRY_DATA_STATUS_PENDING,
-- ENTRY_DATA_STATUS_SET,
- };
-
- /**
-@@ -387,8 +386,6 @@ struct queue_entry {
-
- unsigned int entry_idx;
-
-- u32 status;
--
- void *priv_data;
- };
-
diff --git a/package/kernel/mac80211/patches/rt2x00/031-rt2x00mmio-remove-legacy-comment.patch b/package/kernel/mac80211/patches/rt2x00/031-rt2x00mmio-remove-legacy-comment.patch
deleted file mode 100644
index 199a6e3255..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/031-rt2x00mmio-remove-legacy-comment.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From f44e145869bb517460648e4ed71b7e9001964d06 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Sat, 9 Feb 2019 12:08:38 +0100
-X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
-X-Patchwork-Id: 10804451
-X-Patchwork-Delegate: kvalo@adurom.com
-Subject: [PATCH 28/28] rt2x00mmio: remove legacy comment
-
-Remove comment about fields that ware removed.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00mmio.h | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.h
-@@ -80,8 +80,6 @@ int rt2x00mmio_regbusy_read(struct rt2x0
- *
- * @desc: Pointer to device descriptor
- * @desc_dma: DMA pointer to &desc.
-- * @data: Pointer to device's entry memory.
-- * @data_dma: DMA pointer to &data.
- */
- struct queue_entry_priv_mmio {
- __le32 *desc;
diff --git a/package/kernel/mac80211/patches/rt2x00/032-rt2x00-do-not-increment-sequence-number-while-re-tra.patch b/package/kernel/mac80211/patches/rt2x00/032-rt2x00-do-not-increment-sequence-number-while-re-tra.patch
deleted file mode 100644
index c1f3815998..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/032-rt2x00-do-not-increment-sequence-number-while-re-tra.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 746ba11f170603bf1eaade817553a6c2e9135bbe Mon Sep 17 00:00:00 2001
-From: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
-Date: Wed, 27 Mar 2019 11:03:17 +0100
-Subject: [PATCH] rt2x00: do not increment sequence number while
- re-transmitting
-
-Currently rt2x00 devices retransmit the management frames with
-incremented sequence number if hardware is assigning the sequence.
-
-This is HW bug fixed already for non-QOS data frames, but it should
-be fixed for management frames except beacon.
-
-Without fix retransmitted frames have wrong SN:
-
- AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1648, FN=0, Flags=........C Frame is not being retransmitted 1648 1
- AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1649, FN=0, Flags=....R...C Frame is being retransmitted 1649 1
- AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1650, FN=0, Flags=....R...C Frame is being retransmitted 1650 1
-
-With the fix SN stays correctly the same:
-
- 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=........C
- 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C
- 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
-[sgruszka: simplify code, change comments and changelog]
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 -
- drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 10 ----------
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 15 +++++++++------
- 3 files changed, 9 insertions(+), 17 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -673,7 +673,6 @@ enum rt2x00_state_flags {
- CONFIG_CHANNEL_HT40,
- CONFIG_POWERSAVING,
- CONFIG_HT_DISABLED,
-- CONFIG_QOS_DISABLED,
- CONFIG_MONITORING,
-
- /*
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
-@@ -642,19 +642,9 @@ void rt2x00mac_bss_info_changed(struct i
- rt2x00dev->intf_associated--;
-
- rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated);
--
-- clear_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags);
- }
-
- /*
-- * Check for access point which do not support 802.11e . We have to
-- * generate data frames sequence number in S/W for such AP, because
-- * of H/W bug.
-- */
-- if (changes & BSS_CHANGED_QOS && !bss_conf->qos)
-- set_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags);
--
-- /*
- * When the erp information has changed, we should perform
- * additional configuration steps. For all other changes we are done.
- */
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-@@ -201,15 +201,18 @@ static void rt2x00queue_create_tx_descri
- if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_SW_SEQNO)) {
- /*
- * rt2800 has a H/W (or F/W) bug, device incorrectly increase
-- * seqno on retransmited data (non-QOS) frames. To workaround
-- * the problem let's generate seqno in software if QOS is
-- * disabled.
-+ * seqno on retransmitted data (non-QOS) and management frames.
-+ * To workaround the problem let's generate seqno in software.
-+ * Except for beacons which are transmitted periodically by H/W
-+ * hence hardware has to assign seqno for them.
- */
-- if (test_bit(CONFIG_QOS_DISABLED, &rt2x00dev->flags))
-- __clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
-- else
-+ if (ieee80211_is_beacon(hdr->frame_control)) {
-+ __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
- /* H/W will generate sequence number */
- return;
-+ }
-+
-+ __clear_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
- }
-
- /*
diff --git a/package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch b/package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch
deleted file mode 100644
index 162a20155d..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch
+++ /dev/null
@@ -1,959 +0,0 @@
-From d0e61a0f7cca51ce340a5a73595189972122ff25 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 24 Apr 2019 09:49:24 +0200
-Subject: [PATCH] rt2x00: add RT3883 support
-
-Patch add support for RT3883 chip. Code was taken direclty
-from openwrt project and merge into one patch.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800.h | 19 +-
- .../net/wireless/ralink/rt2x00/rt2800lib.c | 598 +++++++++++++++++-
- .../net/wireless/ralink/rt2x00/rt2800soc.c | 9 +-
- 3 files changed, 607 insertions(+), 19 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -48,7 +48,8 @@
- * RF2853 2.4G/5G 3T3R
- * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
- * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
-- * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
-+ * RF3053 2.4G/5G 3T3R(RT3563/RT3573/RT3593)
-+ * RF3853 2.4G/5G 3T3R(RT3883/RT3662)
- * RF5592 2.4G/5G 2T2R
- * RF3070 2.4G 1T1R
- * RF5360 2.4G 1T1R
-@@ -72,6 +73,7 @@
- #define RF5592 0x000f
- #define RF3070 0x3070
- #define RF3290 0x3290
-+#define RF3853 0x3853
- #define RF5350 0x5350
- #define RF5360 0x5360
- #define RF5362 0x5362
-@@ -1726,6 +1728,20 @@
- #define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff)
-
- /*
-+ * TX_TXBF_CFG:
-+ */
-+#define TX_TXBF_CFG_0 0x138c
-+#define TX_TXBF_CFG_1 0x13a4
-+#define TX_TXBF_CFG_2 0x13a8
-+#define TX_TXBF_CFG_3 0x13ac
-+
-+/*
-+ * TX_FBK_CFG_3S:
-+ */
-+#define TX_FBK_CFG_3S_0 0x13c4
-+#define TX_FBK_CFG_3S_1 0x13c8
-+
-+/*
- * RX_FILTER_CFG: RX configuration register.
- */
- #define RX_FILTER_CFG 0x1400
-@@ -2296,6 +2312,7 @@ struct mac_iveiv_entry {
- /*
- * RFCSR 2:
- */
-+#define RFCSR2_RESCAL_BP FIELD8(0x40)
- #define RFCSR2_RESCAL_EN FIELD8(0x80)
- #define RFCSR2_RX2_EN_MT7620 FIELD8(0x02)
- #define RFCSR2_TX2_EN_MT7620 FIELD8(0x20)
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -381,7 +381,8 @@ static unsigned int rt2800_eeprom_word_i
- wiphy_name(rt2x00dev->hw->wiphy), word))
- return 0;
-
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- map = rt2800_eeprom_map_ext;
- else
- map = rt2800_eeprom_map;
-@@ -590,6 +591,7 @@ void rt2800_get_txwi_rxwi_size(struct rt
- {
- switch (rt2x00dev->chip.rt) {
- case RT3593:
-+ case RT3883:
- *txwi_size = TXWI_DESC_SIZE_4WORDS;
- *rxwi_size = RXWI_DESC_SIZE_5WORDS;
- break;
-@@ -2180,7 +2182,8 @@ void rt2800_config_ant(struct rt2x00_dev
- rt2800_bbp_write(rt2x00dev, 3, r3);
- rt2800_bbp_write(rt2x00dev, 1, r1);
-
-- if (rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883)) {
- if (ant->rx_chain_num == 1)
- rt2800_bbp_write(rt2x00dev, 86, 0x00);
- else
-@@ -2202,7 +2205,8 @@ static void rt2800_config_lna_gain(struc
- eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA);
- lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
- } else if (libconf->rf.channel <= 128) {
-- if (rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883)) {
- eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
- lna_gain = rt2x00_get_field16(eeprom,
- EEPROM_EXT_LNA2_A1);
-@@ -2212,7 +2216,8 @@ static void rt2800_config_lna_gain(struc
- EEPROM_RSSI_BG2_LNA_A1);
- }
- } else {
-- if (rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883)) {
- eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
- lna_gain = rt2x00_get_field16(eeprom,
- EEPROM_EXT_LNA2_A2);
-@@ -2880,6 +2885,211 @@ static void rt2800_config_channel_rf3053
- }
- }
-
-+static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ u8 rfcsr;
-+ u8 bbp;
-+ u8 pwr1, pwr2, pwr3;
-+
-+ const bool txbf_enabled = false; /* TODO */
-+
-+ /* TODO: add band selection */
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
-+ else if (rf->channel < 132)
-+ rt2800_rfcsr_write(rt2x00dev, 6, 0x80);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
-+
-+ rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
-+ rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 11, 0x46);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 11, 0x48);
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 12, 0x52);
-+
-+ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
-+
-+ switch (rt2x00dev->default_ant.tx_chain_num) {
-+ case 3:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
-+ /* fallthrough */
-+ case 2:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
-+ /* fallthrough */
-+ case 1:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
-+ break;
-+ }
-+
-+ switch (rt2x00dev->default_ant.rx_chain_num) {
-+ case 3:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
-+ /* fallthrough */
-+ case 2:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
-+ /* fallthrough */
-+ case 1:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
-+ break;
-+ }
-+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
-+
-+ rt2800_freq_cal_mode1(rt2x00dev);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
-+ if (!conf_is_ht40(conf))
-+ rfcsr &= ~(0x06);
-+ else
-+ rfcsr |= 0x06;
-+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 31, 0xa0);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
-+
-+ if (conf_is_ht40(conf))
-+ rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8);
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 34, 0x3c);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
-+
-+ /* loopback RF_BS */
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 36);
-+ if (rf->channel <= 14)
-+ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1);
-+ else
-+ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0);
-+ rt2800_rfcsr_write(rt2x00dev, 36, rfcsr);
-+
-+ if (rf->channel <= 14)
-+ rfcsr = 0x23;
-+ else if (rf->channel < 100)
-+ rfcsr = 0x36;
-+ else if (rf->channel < 132)
-+ rfcsr = 0x32;
-+ else
-+ rfcsr = 0x30;
-+
-+ if (txbf_enabled)
-+ rfcsr |= 0x40;
-+
-+ rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 44, 0x9b);
-+
-+ if (rf->channel <= 14)
-+ rfcsr = 0xbb;
-+ else if (rf->channel < 100)
-+ rfcsr = 0xeb;
-+ else if (rf->channel < 132)
-+ rfcsr = 0xb3;
-+ else
-+ rfcsr = 0x9b;
-+ rt2800_rfcsr_write(rt2x00dev, 45, rfcsr);
-+
-+ if (rf->channel <= 14)
-+ rfcsr = 0x8e;
-+ else
-+ rfcsr = 0x8a;
-+
-+ if (txbf_enabled)
-+ rfcsr |= 0x20;
-+
-+ rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
-+
-+ rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 51, 0x75);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 52);
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
-+
-+ if (rf->channel <= 14) {
-+ pwr1 = info->default_power1 & 0x1f;
-+ pwr2 = info->default_power2 & 0x1f;
-+ pwr3 = info->default_power3 & 0x1f;
-+ } else {
-+ pwr1 = 0x48 | ((info->default_power1 & 0x18) << 1) |
-+ (info->default_power1 & 0x7);
-+ pwr2 = 0x48 | ((info->default_power2 & 0x18) << 1) |
-+ (info->default_power2 & 0x7);
-+ pwr3 = 0x48 | ((info->default_power3 & 0x18) << 1) |
-+ (info->default_power3 & 0x7);
-+ }
-+
-+ rt2800_rfcsr_write(rt2x00dev, 53, pwr1);
-+ rt2800_rfcsr_write(rt2x00dev, 54, pwr2);
-+ rt2800_rfcsr_write(rt2x00dev, 55, pwr3);
-+
-+ rt2x00_dbg(rt2x00dev, "Channel:%d, pwr1:%02x, pwr2:%02x, pwr3:%02x\n",
-+ rf->channel, pwr1, pwr2, pwr3);
-+
-+ bbp = (info->default_power1 >> 5) |
-+ ((info->default_power2 & 0xe0) >> 1);
-+ rt2800_bbp_write(rt2x00dev, 109, bbp);
-+
-+ bbp = rt2800_bbp_read(rt2x00dev, 110);
-+ bbp &= 0x0f;
-+ bbp |= (info->default_power3 & 0xe0) >> 1;
-+ rt2800_bbp_write(rt2x00dev, 110, bbp);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 57);
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 57, 0x6e);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
-+
-+ /* Enable RF tuning */
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
-+ rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
-+ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
-+
-+ udelay(2000);
-+
-+ bbp = rt2800_bbp_read(rt2x00dev, 49);
-+ /* clear update flag */
-+ rt2800_bbp_write(rt2x00dev, 49, bbp & 0xfe);
-+ rt2800_bbp_write(rt2x00dev, 49, bbp);
-+
-+ /* TODO: add calibration for TxBF */
-+}
-+
- #define POWER_BOUND 0x27
- #define POWER_BOUND_5G 0x2b
-
-@@ -3683,19 +3893,51 @@ static char rt2800_txpower_to_dev(struct
- unsigned int channel,
- char txpower)
- {
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC);
-
- if (channel <= 14)
- return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER);
-
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- return clamp_t(char, txpower, MIN_A_TXPOWER_3593,
- MAX_A_TXPOWER_3593);
- else
- return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
- }
-
-+static void rt3883_bbp_adjust(struct rt2x00_dev *rt2x00dev,
-+ struct rf_channel *rf)
-+{
-+ u8 bbp;
-+
-+ bbp = (rf->channel > 14) ? 0x48 : 0x38;
-+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, bbp);
-+
-+ rt2800_bbp_write(rt2x00dev, 69, 0x12);
-+
-+ if (rf->channel <= 14) {
-+ rt2800_bbp_write(rt2x00dev, 70, 0x0a);
-+ } else {
-+ /* Disable CCK packet detection */
-+ rt2800_bbp_write(rt2x00dev, 70, 0x00);
-+ }
-+
-+ rt2800_bbp_write(rt2x00dev, 73, 0x10);
-+
-+ if (rf->channel > 14) {
-+ rt2800_bbp_write(rt2x00dev, 62, 0x1d);
-+ rt2800_bbp_write(rt2x00dev, 63, 0x1d);
-+ rt2800_bbp_write(rt2x00dev, 64, 0x1d);
-+ } else {
-+ rt2800_bbp_write(rt2x00dev, 62, 0x2d);
-+ rt2800_bbp_write(rt2x00dev, 63, 0x2d);
-+ rt2800_bbp_write(rt2x00dev, 64, 0x2d);
-+ }
-+}
-+
- static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf,
- struct rf_channel *rf,
-@@ -3714,6 +3956,12 @@ static void rt2800_config_channel(struct
- rt2800_txpower_to_dev(rt2x00dev, rf->channel,
- info->default_power3);
-
-+ switch (rt2x00dev->chip.rt) {
-+ case RT3883:
-+ rt3883_bbp_adjust(rt2x00dev, rf);
-+ break;
-+ }
-+
- switch (rt2x00dev->chip.rf) {
- case RF2020:
- case RF3020:
-@@ -3734,6 +3982,9 @@ static void rt2800_config_channel(struct
- case RF3322:
- rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
- break;
-+ case RF3853:
-+ rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info);
-+ break;
- case RF3070:
- case RF5350:
- case RF5360:
-@@ -3815,6 +4066,15 @@ static void rt2800_config_channel(struct
- rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
- rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
- rt2800_bbp_write(rt2x00dev, 77, 0x98);
-+ } else if (rt2x00_rt(rt2x00dev, RT3883)) {
-+ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-+ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-+
-+ if (rt2x00dev->default_ant.rx_chain_num > 1)
-+ rt2800_bbp_write(rt2x00dev, 86, 0x46);
-+ else
-+ rt2800_bbp_write(rt2x00dev, 86, 0);
- } else {
- rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
- rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-@@ -3828,6 +4088,7 @@ static void rt2800_config_channel(struct
- !rt2x00_rt(rt2x00dev, RT6352)) {
- if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
- rt2800_bbp_write(rt2x00dev, 82, 0x62);
-+ rt2800_bbp_write(rt2x00dev, 82, 0x62);
- rt2800_bbp_write(rt2x00dev, 75, 0x46);
- } else {
- if (rt2x00_rt(rt2x00dev, RT3593))
-@@ -3836,19 +4097,22 @@ static void rt2800_config_channel(struct
- rt2800_bbp_write(rt2x00dev, 82, 0x84);
- rt2800_bbp_write(rt2x00dev, 75, 0x50);
- }
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- rt2800_bbp_write(rt2x00dev, 83, 0x8a);
- }
-
- } else {
- if (rt2x00_rt(rt2x00dev, RT3572))
- rt2800_bbp_write(rt2x00dev, 82, 0x94);
-- else if (rt2x00_rt(rt2x00dev, RT3593))
-+ else if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- rt2800_bbp_write(rt2x00dev, 82, 0x82);
- else if (!rt2x00_rt(rt2x00dev, RT6352))
- rt2800_bbp_write(rt2x00dev, 82, 0xf2);
-
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- rt2800_bbp_write(rt2x00dev, 83, 0x9a);
-
- if (rt2x00_has_cap_external_lna_a(rt2x00dev))
-@@ -3984,6 +4248,23 @@ static void rt2800_config_channel(struct
- usleep_range(1000, 1500);
- }
-
-+ if (rt2x00_rt(rt2x00dev, RT3883)) {
-+ if (!conf_is_ht40(conf))
-+ rt2800_bbp_write(rt2x00dev, 105, 0x34);
-+ else
-+ rt2800_bbp_write(rt2x00dev, 105, 0x04);
-+
-+ /* AGC init */
-+ if (rf->channel <= 14)
-+ reg = 0x2e + rt2x00dev->lna_gain;
-+ else
-+ reg = 0x20 + ((rt2x00dev->lna_gain * 5) / 3);
-+
-+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
-+
-+ usleep_range(1000, 1500);
-+ }
-+
- if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) {
- reg = 0x10;
- if (!conf_is_ht40(conf)) {
-@@ -4243,6 +4524,9 @@ static u8 rt2800_compensate_txpower(stru
- if (rt2x00_rt(rt2x00dev, RT3593))
- return min_t(u8, txpower, 0xc);
-
-+ if (rt2x00_rt(rt2x00dev, RT3883))
-+ return min_t(u8, txpower, 0xf);
-+
- if (rt2x00_has_cap_power_limit(rt2x00dev)) {
- /*
- * Check if eirp txpower exceed txpower_limit.
-@@ -5004,7 +5288,8 @@ static void rt2800_config_txpower(struct
- struct ieee80211_channel *chan,
- int power_level)
- {
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level);
- else if (rt2x00_rt(rt2x00dev, RT6352))
- rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level);
-@@ -5051,6 +5336,7 @@ void rt2800_vco_calibration(struct rt2x0
- case RF3053:
- case RF3070:
- case RF3290:
-+ case RF3853:
- case RF5350:
- case RF5360:
- case RF5362:
-@@ -5251,7 +5537,8 @@ static u8 rt2800_get_default_vgc(struct
- else
- vgc = 0x2e + rt2x00dev->lna_gain;
- } else { /* 5GHZ band */
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
- else if (rt2x00_rt(rt2x00dev, RT5592))
- vgc = 0x24 + (2 * rt2x00dev->lna_gain);
-@@ -5271,7 +5558,8 @@ static inline void rt2800_set_vgc(struct
- {
- if (qual->vgc_level != vgc_level) {
- if (rt2x00_rt(rt2x00dev, RT3572) ||
-- rt2x00_rt(rt2x00dev, RT3593)) {
-+ rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883)) {
- rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
- vgc_level);
- } else if (rt2x00_rt(rt2x00dev, RT5592)) {
-@@ -5318,6 +5606,11 @@ void rt2800_link_tuner(struct rt2x00_dev
- }
- break;
-
-+ case RT3883:
-+ if (qual->rssi > -65)
-+ vgc += 0x10;
-+ break;
-+
- case RT5592:
- if (qual->rssi > -65)
- vgc += 0x20;
-@@ -5470,6 +5763,12 @@ static int rt2800_init_registers(struct
- rt2800_register_write(rt2x00dev, TX_SW_CFG2,
- 0x00000000);
- }
-+ } else if (rt2x00_rt(rt2x00dev, RT3883)) {
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000);
-+ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21);
-+ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40);
- } else if (rt2x00_rt(rt2x00dev, RT5390) ||
- rt2x00_rt(rt2x00dev, RT5392) ||
- rt2x00_rt(rt2x00dev, RT6352)) {
-@@ -5683,6 +5982,11 @@ static int rt2800_init_registers(struct
- reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
- rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
-
-+ if (rt2x00_rt(rt2x00dev, RT3883)) {
-+ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_0, 0x12111008);
-+ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_1, 0x16151413);
-+ }
-+
- reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG);
- rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 7);
- rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
-@@ -6299,6 +6603,47 @@ static void rt2800_init_bbp_3593(struct
- rt2800_bbp_write(rt2x00dev, 103, 0xc0);
- }
-
-+static void rt2800_init_bbp_3883(struct rt2x00_dev *rt2x00dev)
-+{
-+ rt2800_init_bbp_early(rt2x00dev);
-+
-+ rt2800_bbp_write(rt2x00dev, 4, 0x50);
-+ rt2800_bbp_write(rt2x00dev, 47, 0x48);
-+
-+ rt2800_bbp_write(rt2x00dev, 86, 0x46);
-+ rt2800_bbp_write(rt2x00dev, 88, 0x90);
-+
-+ rt2800_bbp_write(rt2x00dev, 92, 0x02);
-+
-+ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
-+ rt2800_bbp_write(rt2x00dev, 104, 0x92);
-+ rt2800_bbp_write(rt2x00dev, 105, 0x34);
-+ rt2800_bbp_write(rt2x00dev, 106, 0x12);
-+ rt2800_bbp_write(rt2x00dev, 120, 0x50);
-+ rt2800_bbp_write(rt2x00dev, 137, 0x0f);
-+ rt2800_bbp_write(rt2x00dev, 163, 0x9d);
-+
-+ /* Set ITxBF timeout to 0x9C40=1000msec */
-+ rt2800_bbp_write(rt2x00dev, 179, 0x02);
-+ rt2800_bbp_write(rt2x00dev, 180, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 182, 0x40);
-+ rt2800_bbp_write(rt2x00dev, 180, 0x01);
-+ rt2800_bbp_write(rt2x00dev, 182, 0x9c);
-+
-+ rt2800_bbp_write(rt2x00dev, 179, 0x00);
-+
-+ /* Reprogram the inband interface to put right values in RXWI */
-+ rt2800_bbp_write(rt2x00dev, 142, 0x04);
-+ rt2800_bbp_write(rt2x00dev, 143, 0x3b);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x06);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa0);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x07);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa1);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x08);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa2);
-+ rt2800_bbp_write(rt2x00dev, 148, 0xc8);
-+}
-+
- static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
- {
- int ant, div_mode;
-@@ -6743,6 +7088,9 @@ static void rt2800_init_bbp(struct rt2x0
- case RT3593:
- rt2800_init_bbp_3593(rt2x00dev);
- return;
-+ case RT3883:
-+ rt2800_init_bbp_3883(rt2x00dev);
-+ return;
- case RT5390:
- case RT5392:
- rt2800_init_bbp_53xx(rt2x00dev);
-@@ -7614,6 +7962,144 @@ static void rt2800_init_rfcsr_5350(struc
- rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
- }
-
-+static void rt2800_init_rfcsr_3883(struct rt2x00_dev *rt2x00dev)
-+{
-+ u8 rfcsr;
-+
-+ /* TODO: get the actual ECO value from the SoC */
-+ const unsigned int eco = 5;
-+
-+ rt2800_rf_init_calibration(rt2x00dev, 2);
-+
-+ rt2800_rfcsr_write(rt2x00dev, 0, 0xe0);
-+ rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
-+ rt2800_rfcsr_write(rt2x00dev, 2, 0x50);
-+ rt2800_rfcsr_write(rt2x00dev, 3, 0x20);
-+ rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
-+ rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 8, 0x5b);
-+ rt2800_rfcsr_write(rt2x00dev, 9, 0x08);
-+ rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
-+ rt2800_rfcsr_write(rt2x00dev, 11, 0x48);
-+ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a);
-+ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
-+ rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
-+
-+ /* RFCSR 17 will be initialized later based on the
-+ * frequency offset stored in the EEPROM
-+ */
-+
-+ rt2800_rfcsr_write(rt2x00dev, 18, 0x40);
-+ rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
-+ rt2800_rfcsr_write(rt2x00dev, 23, 0xc0);
-+ rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 25, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 29, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
-+ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
-+ rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
-+ rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
-+ rt2800_rfcsr_write(rt2x00dev, 35, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 37, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 38, 0x86);
-+ rt2800_rfcsr_write(rt2x00dev, 39, 0x23);
-+ rt2800_rfcsr_write(rt2x00dev, 40, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 41, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 42, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
-+ rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
-+ rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
-+ rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 48, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 49, 0x8e);
-+ rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
-+ rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
-+ rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
-+ rt2800_rfcsr_write(rt2x00dev, 53, 0x76);
-+ rt2800_rfcsr_write(rt2x00dev, 54, 0x76);
-+ rt2800_rfcsr_write(rt2x00dev, 55, 0x76);
-+ rt2800_rfcsr_write(rt2x00dev, 56, 0xdb);
-+ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
-+ rt2800_rfcsr_write(rt2x00dev, 58, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
-+
-+ /* TODO: rx filter calibration? */
-+
-+ rt2800_bbp_write(rt2x00dev, 137, 0x0f);
-+
-+ rt2800_bbp_write(rt2x00dev, 163, 0x9d);
-+
-+ rt2800_bbp_write(rt2x00dev, 105, 0x05);
-+
-+ rt2800_bbp_write(rt2x00dev, 179, 0x02);
-+ rt2800_bbp_write(rt2x00dev, 180, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 182, 0x40);
-+ rt2800_bbp_write(rt2x00dev, 180, 0x01);
-+ rt2800_bbp_write(rt2x00dev, 182, 0x9c);
-+
-+ rt2800_bbp_write(rt2x00dev, 179, 0x00);
-+
-+ rt2800_bbp_write(rt2x00dev, 142, 0x04);
-+ rt2800_bbp_write(rt2x00dev, 143, 0x3b);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x06);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa0);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x07);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa1);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x08);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa2);
-+ rt2800_bbp_write(rt2x00dev, 148, 0xc8);
-+
-+ if (eco == 5) {
-+ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8);
-+ rt2800_rfcsr_write(rt2x00dev, 33, 0x32);
-+ }
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 2);
-+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_BP, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
-+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
-+ msleep(1);
-+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0);
-+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
-+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
-+ rfcsr |= 0xc0;
-+ rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
-+ rfcsr |= 0x20;
-+ rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 46);
-+ rfcsr |= 0x20;
-+ rt2800_rfcsr_write(rt2x00dev, 46, rfcsr);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 20);
-+ rfcsr &= ~0xee;
-+ rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
-+}
-+
- static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
- {
- rt2800_rf_init_calibration(rt2x00dev, 2);
-@@ -8456,6 +8942,9 @@ static void rt2800_init_rfcsr(struct rt2
- case RT3390:
- rt2800_init_rfcsr_3390(rt2x00dev);
- break;
-+ case RT3883:
-+ rt2800_init_rfcsr_3883(rt2x00dev);
-+ break;
- case RT3572:
- rt2800_init_rfcsr_3572(rt2x00dev);
- break;
-@@ -8661,7 +9150,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
- {
- u16 word;
-
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- return 0;
-
- word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG);
-@@ -8675,7 +9165,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
- {
- u16 word;
-
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- return 0;
-
- word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A);
-@@ -8781,7 +9272,8 @@ static int rt2800_validate_eeprom(struct
- word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2);
- if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
- rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
-- if (!rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (!rt2x00_rt(rt2x00dev, RT3593) &&
-+ !rt2x00_rt(rt2x00dev, RT3883)) {
- if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
- rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
- rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
-@@ -8801,7 +9293,8 @@ static int rt2800_validate_eeprom(struct
- word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2);
- if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
- rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
-- if (!rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (!rt2x00_rt(rt2x00dev, RT3593) &&
-+ !rt2x00_rt(rt2x00dev, RT3883)) {
- if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
- rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
- rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
-@@ -8809,7 +9302,8 @@ static int rt2800_validate_eeprom(struct
- }
- rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
-
-- if (rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883)) {
- word = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
- if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 ||
- rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff)
-@@ -8848,6 +9342,8 @@ static int rt2800_init_eeprom(struct rt2
- rf = rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID);
- else if (rt2x00_rt(rt2x00dev, RT3352))
- rf = RF3322;
-+ else if (rt2x00_rt(rt2x00dev, RT3883))
-+ rf = RF3853;
- else if (rt2x00_rt(rt2x00dev, RT5350))
- rf = RF5350;
- else
-@@ -8868,6 +9364,7 @@ static int rt2800_init_eeprom(struct rt2
- case RF3290:
- case RF3320:
- case RF3322:
-+ case RF3853:
- case RF5350:
- case RF5360:
- case RF5362:
-@@ -9154,6 +9651,66 @@ static const struct rf_channel rf_vals_3
- {14, 0xF0, 2, 0x18},
- };
-
-+static const struct rf_channel rf_vals_3853[] = {
-+ {1, 241, 6, 2},
-+ {2, 241, 6, 7},
-+ {3, 242, 6, 2},
-+ {4, 242, 6, 7},
-+ {5, 243, 6, 2},
-+ {6, 243, 6, 7},
-+ {7, 244, 6, 2},
-+ {8, 244, 6, 7},
-+ {9, 245, 6, 2},
-+ {10, 245, 6, 7},
-+ {11, 246, 6, 2},
-+ {12, 246, 6, 7},
-+ {13, 247, 6, 2},
-+ {14, 248, 6, 4},
-+
-+ {36, 0x56, 8, 4},
-+ {38, 0x56, 8, 6},
-+ {40, 0x56, 8, 8},
-+ {44, 0x57, 8, 0},
-+ {46, 0x57, 8, 2},
-+ {48, 0x57, 8, 4},
-+ {52, 0x57, 8, 8},
-+ {54, 0x57, 8, 10},
-+ {56, 0x58, 8, 0},
-+ {60, 0x58, 8, 4},
-+ {62, 0x58, 8, 6},
-+ {64, 0x58, 8, 8},
-+
-+ {100, 0x5b, 8, 8},
-+ {102, 0x5b, 8, 10},
-+ {104, 0x5c, 8, 0},
-+ {108, 0x5c, 8, 4},
-+ {110, 0x5c, 8, 6},
-+ {112, 0x5c, 8, 8},
-+ {114, 0x5c, 8, 10},
-+ {116, 0x5d, 8, 0},
-+ {118, 0x5d, 8, 2},
-+ {120, 0x5d, 8, 4},
-+ {124, 0x5d, 8, 8},
-+ {126, 0x5d, 8, 10},
-+ {128, 0x5e, 8, 0},
-+ {132, 0x5e, 8, 4},
-+ {134, 0x5e, 8, 6},
-+ {136, 0x5e, 8, 8},
-+ {140, 0x5f, 8, 0},
-+
-+ {149, 0x5f, 8, 9},
-+ {151, 0x5f, 8, 11},
-+ {153, 0x60, 8, 1},
-+ {157, 0x60, 8, 5},
-+ {159, 0x60, 8, 7},
-+ {161, 0x60, 8, 9},
-+ {165, 0x61, 8, 1},
-+ {167, 0x61, 8, 3},
-+ {169, 0x61, 8, 5},
-+ {171, 0x61, 8, 7},
-+ {173, 0x61, 8, 9},
-+};
-+
- static const struct rf_channel rf_vals_5592_xtal20[] = {
- /* Channel, N, K, mod, R */
- {1, 482, 4, 10, 3},
-@@ -9417,6 +9974,11 @@ static int rt2800_probe_hw_mode(struct r
- spec->channels = rf_vals_3x;
- break;
-
-+ case RF3853:
-+ spec->num_channels = ARRAY_SIZE(rf_vals_3853);
-+ spec->channels = rf_vals_3853;
-+ break;
-+
- case RF5592:
- reg = rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX);
- if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) {
-@@ -9536,6 +10098,7 @@ static int rt2800_probe_hw_mode(struct r
- case RF3053:
- case RF3070:
- case RF3290:
-+ case RF3853:
- case RF5350:
- case RF5360:
- case RF5362:
-@@ -9578,6 +10141,7 @@ static int rt2800_probe_rt(struct rt2x00
- case RT3390:
- case RT3572:
- case RT3593:
-+ case RT3883:
- case RT5350:
- case RT5390:
- case RT5392:
---- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
-@@ -51,9 +51,16 @@ static bool rt2800soc_hwcrypt_disabled(s
-
- static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
- {
-+ u32 reg;
-+
- rt2800_disable_radio(rt2x00dev);
- rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-- rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0);
-+
-+ reg = 0;
-+ if (rt2x00_rt(rt2x00dev, RT3883))
-+ rt2x00_set_field32(&reg, TX_PIN_CFG_RFTR_EN, 1);
-+
-+ rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, reg);
- }
-
- static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
diff --git a/package/kernel/mac80211/patches/rt2x00/100-rt2x00_options.patch b/package/kernel/mac80211/patches/rt2x00/100-rt2x00_options.patch
index 9dd348151c..295904c64e 100644
--- a/package/kernel/mac80211/patches/rt2x00/100-rt2x00_options.patch
+++ b/package/kernel/mac80211/patches/rt2x00/100-rt2x00_options.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
-@@ -225,36 +225,37 @@ config RT2800SOC
+@@ -226,36 +226,37 @@ config RT2800SOC
config RT2800_LIB
diff --git a/package/kernel/mac80211/patches/rt2x00/501-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/501-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch
index 699989baa0..b4106b0197 100644
--- a/package/kernel/mac80211/patches/rt2x00/501-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch
+++ b/package/kernel/mac80211/patches/rt2x00/501-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch
@@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
-@@ -210,7 +210,7 @@ endif
+@@ -211,7 +211,7 @@ endif
config RT2800SOC
tristate "Ralink WiSoC support"
depends on m
@@ -19,7 +19,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
select RT2X00_LIB_SOC
select RT2X00_LIB_MMIO
select RT2X00_LIB_CRYPTO
-@@ -245,7 +245,7 @@ config RT2X00_LIB_PCI
+@@ -246,7 +246,7 @@ config RT2X00_LIB_PCI
config RT2X00_LIB_SOC
tristate "RT2x00 SoC support"
diff --git a/package/kernel/mac80211/patches/rt2x00/601-rt2x00-introduce-rt2x00_platform_h.patch b/package/kernel/mac80211/patches/rt2x00/601-rt2x00-introduce-rt2x00_platform_h.patch
index 9d47076ff6..f9d48b2b31 100644
--- a/package/kernel/mac80211/patches/rt2x00/601-rt2x00-introduce-rt2x00_platform_h.patch
+++ b/package/kernel/mac80211/patches/rt2x00/601-rt2x00-introduce-rt2x00_platform_h.patch
@@ -22,7 +22,7 @@
+#endif /* _RT2X00_PLATFORM_H */
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -40,6 +40,7 @@
+@@ -29,6 +29,7 @@
#include <linux/average.h>
#include <linux/usb.h>
#include <linux/clk.h>
diff --git a/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch b/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch
index 697d8188f0..417ef32b3d 100644
--- a/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch
+++ b/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch
@@ -1,6 +1,6 @@
--- a/local-symbols
+++ b/local-symbols
-@@ -305,6 +305,7 @@ RT2X00_LIB_FIRMWARE=
+@@ -311,6 +311,7 @@ RT2X00_LIB_FIRMWARE=
RT2X00_LIB_CRYPTO=
RT2X00_LIB_LEDS=
RT2X00_LIB_DEBUGFS=
@@ -10,7 +10,7 @@
RTL8180=
--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
-@@ -69,6 +69,7 @@ config RT2800PCI
+@@ -70,6 +70,7 @@ config RT2800PCI
select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select RT2X00_LIB_FIRMWARE
@@ -18,7 +18,7 @@
select RT2X00_LIB_CRYPTO
depends on CRC_CCITT
depends on EEPROM_93CX6
-@@ -215,6 +216,7 @@ config RT2800SOC
+@@ -216,6 +217,7 @@ config RT2800SOC
select RT2X00_LIB_MMIO
select RT2X00_LIB_CRYPTO
select RT2X00_LIB_FIRMWARE
@@ -26,7 +26,7 @@
select RT2800_LIB
select RT2800_LIB_MMIO
---help---
-@@ -265,6 +267,9 @@ config RT2X00_LIB_FIRMWARE
+@@ -266,6 +268,9 @@ config RT2X00_LIB_FIRMWARE
config RT2X00_LIB_CRYPTO
bool
@@ -48,7 +48,7 @@
obj-$(CPTCFG_RT2X00_LIB_MMIO) += rt2x00mmio.o
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -48,6 +48,8 @@ struct rt2800_drv_data {
+@@ -37,6 +37,8 @@ struct rt2800_drv_data {
struct ieee80211_sta *wcid_to_sta[STA_IDS_SIZE];
};
@@ -57,7 +57,7 @@
struct rt2800_ops {
u32 (*register_read)(struct rt2x00_dev *rt2x00dev,
const unsigned int offset);
-@@ -145,6 +147,15 @@ static inline int rt2800_read_eeprom(str
+@@ -134,6 +136,15 @@ static inline int rt2800_read_eeprom(str
{
const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
@@ -75,7 +75,7 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
-@@ -102,19 +102,6 @@ static int rt2800soc_set_device_state(st
+@@ -90,19 +90,6 @@ static int rt2800soc_set_device_state(st
return retval;
}
@@ -95,7 +95,7 @@
/* Firmware functions */
static char *rt2800soc_get_firmware_name(struct rt2x00_dev *rt2x00dev)
{
-@@ -178,7 +165,6 @@ static const struct rt2800_ops rt2800soc
+@@ -166,7 +153,6 @@ static const struct rt2800_ops rt2800soc
.register_multiread = rt2x00mmio_register_multiread,
.register_multiwrite = rt2x00mmio_register_multiwrite,
.regbusy_read = rt2x00mmio_regbusy_read,
@@ -105,7 +105,7 @@
.drv_init_registers = rt2800mmio_init_registers,
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -702,6 +702,7 @@ enum rt2x00_capability_flags {
+@@ -691,6 +691,7 @@ enum rt2x00_capability_flags {
REQUIRE_HT_TX_DESC,
REQUIRE_PS_AUTOWAKE,
REQUIRE_DELAYED_RFKILL,
@@ -113,7 +113,7 @@
/*
* Capabilities
-@@ -977,6 +978,11 @@ struct rt2x00_dev {
+@@ -966,6 +967,11 @@ struct rt2x00_dev {
const struct firmware *fw;
/*
@@ -127,7 +127,7 @@
DECLARE_KFIFO_PTR(txstatus_fifo, u32);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1423,6 +1423,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de
+@@ -1412,6 +1412,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de
INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
@@ -138,7 +138,7 @@
/*
* Let the driver probe the device to detect the capabilities.
*/
-@@ -1566,6 +1570,11 @@ void rt2x00lib_remove_dev(struct rt2x00_
+@@ -1555,6 +1559,11 @@ void rt2x00lib_remove_dev(struct rt2x00_
* Free the driver data.
*/
kfree(rt2x00dev->drv_data);
@@ -261,7 +261,7 @@
+}
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00lib.h
-@@ -297,6 +297,22 @@ static inline void rt2x00lib_free_firmwa
+@@ -286,6 +286,22 @@ static inline void rt2x00lib_free_firmwa
#endif /* CPTCFG_RT2X00_LIB_FIRMWARE */
/*
@@ -286,7 +286,7 @@
#ifdef CPTCFG_RT2X00_LIB_DEBUGFS
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
-@@ -97,6 +97,7 @@ int rt2x00soc_probe(struct platform_devi
+@@ -86,6 +86,7 @@ int rt2x00soc_probe(struct platform_devi
if (IS_ERR(rt2x00dev->clk))
rt2x00dev->clk = NULL;
diff --git a/package/kernel/mac80211/patches/rt2x00/604-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch b/package/kernel/mac80211/patches/rt2x00/604-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch
index b3e1220b60..08ca7c96fd 100644
--- a/package/kernel/mac80211/patches/rt2x00/604-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch
+++ b/package/kernel/mac80211/patches/rt2x00/604-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch
@@ -12,7 +12,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
-@@ -219,6 +219,7 @@ config RT2800SOC
+@@ -220,6 +220,7 @@ config RT2800SOC
select RT2X00_LIB_EEPROM
select RT2800_LIB
select RT2800_LIB_MMIO
diff --git a/package/kernel/mac80211/patches/rt2x00/606-rt2x00-allow_disabling_bands_through_platform_data.patch b/package/kernel/mac80211/patches/rt2x00/606-rt2x00-allow_disabling_bands_through_platform_data.patch
index 202dfc0b89..3372e0b3ab 100644
--- a/package/kernel/mac80211/patches/rt2x00/606-rt2x00-allow_disabling_bands_through_platform_data.patch
+++ b/package/kernel/mac80211/patches/rt2x00/606-rt2x00-allow_disabling_bands_through_platform_data.patch
@@ -12,7 +12,7 @@
#endif /* _RT2X00_PLATFORM_H */
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1026,6 +1026,22 @@ static int rt2x00lib_probe_hw_modes(stru
+@@ -1015,6 +1015,22 @@ static int rt2x00lib_probe_hw_modes(stru
unsigned int num_rates;
unsigned int i;
@@ -37,7 +37,7 @@
num_rates += 4;
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -409,6 +409,7 @@ struct hw_mode_spec {
+@@ -398,6 +398,7 @@ struct hw_mode_spec {
unsigned int supported_bands;
#define SUPPORT_BAND_2GHZ 0x00000001
#define SUPPORT_BAND_5GHZ 0x00000002
diff --git a/package/kernel/mac80211/patches/rt2x00/607-rt2x00-add_platform_data_mac_addr.patch b/package/kernel/mac80211/patches/rt2x00/607-rt2x00-add_platform_data_mac_addr.patch
index b8b0188040..f694b061d8 100644
--- a/package/kernel/mac80211/patches/rt2x00/607-rt2x00-add_platform_data_mac_addr.patch
+++ b/package/kernel/mac80211/patches/rt2x00/607-rt2x00-add_platform_data_mac_addr.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1004,8 +1004,13 @@ static void rt2x00lib_rate(struct ieee80
+@@ -993,8 +993,13 @@ static void rt2x00lib_rate(struct ieee80
void rt2x00lib_set_mac_address(struct rt2x00_dev *rt2x00dev, u8 *eeprom_mac_addr)
{
@@ -12,7 +12,7 @@
+ ether_addr_copy(eeprom_mac_addr, pdata->mac_address);
+
mac_addr = of_get_mac_address(rt2x00dev->dev->of_node);
- if (mac_addr)
+ if (!IS_ERR(mac_addr))
ether_addr_copy(eeprom_mac_addr, mac_addr);
--- a/include/linux/rt2x00_platform.h
+++ b/include/linux/rt2x00_platform.h
diff --git a/package/kernel/mac80211/patches/rt2x00/608-rt2x00-allow_disabling_bands_through_dts.patch b/package/kernel/mac80211/patches/rt2x00/608-rt2x00-allow_disabling_bands_through_dts.patch
index ca66aa8e3b..07f7d34941 100644
--- a/package/kernel/mac80211/patches/rt2x00/608-rt2x00-allow_disabling_bands_through_dts.patch
+++ b/package/kernel/mac80211/patches/rt2x00/608-rt2x00-allow_disabling_bands_through_dts.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1030,6 +1030,16 @@ static int rt2x00lib_probe_hw_modes(stru
+@@ -1019,6 +1019,16 @@ static int rt2x00lib_probe_hw_modes(stru
struct ieee80211_rate *rates;
unsigned int num_rates;
unsigned int i;
diff --git a/package/kernel/mac80211/patches/rt2x00/609-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch b/package/kernel/mac80211/patches/rt2x00/609-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch
index ed219c801e..4cb892b3df 100644
--- a/package/kernel/mac80211/patches/rt2x00/609-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch
+++ b/package/kernel/mac80211/patches/rt2x00/609-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch
@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
-@@ -232,10 +232,17 @@ static int rt2800soc_probe(struct platfo
+@@ -220,10 +220,17 @@ static int rt2800soc_probe(struct platfo
return rt2x00soc_probe(pdev, &rt2800soc_ops);
}
diff --git a/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch b/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch
index f0c079b62b..5ea402f5da 100644
--- a/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch
+++ b/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -36,6 +36,7 @@
+@@ -25,6 +25,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -8,7 +8,7 @@
#include "rt2x00.h"
#include "rt2800lib.h"
-@@ -9458,6 +9459,17 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9447,6 +9448,17 @@ static int rt2800_init_eeprom(struct rt2
rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
@@ -28,7 +28,7 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00leds.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00leds.c
-@@ -109,6 +109,9 @@ static int rt2x00leds_register_led(struc
+@@ -98,6 +98,9 @@ static int rt2x00leds_register_led(struc
led->led_dev.name = name;
led->led_dev.brightness = LED_OFF;
diff --git a/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch b/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch
index 062b18a63b..453129d66a 100644
--- a/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch
+++ b/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1361,7 +1361,7 @@ static inline void rt2x00lib_set_if_comb
+@@ -1350,7 +1350,7 @@ static inline void rt2x00lib_set_if_comb
*/
if_limit = &rt2x00dev->if_limits_ap;
if_limit->max = rt2x00dev->ops->max_ap_intf;
diff --git a/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch
index 2b6aa43c2d..98eb8c0b7e 100644
--- a/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch
+++ b/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch
@@ -20,7 +20,7 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -2750,6 +2750,7 @@ enum rt2800_eeprom_word {
+@@ -2739,6 +2739,7 @@ enum rt2800_eeprom_word {
#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f)
#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0)
#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600)
@@ -30,7 +30,7 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
* EEPROM LNA
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4290,6 +4290,45 @@ static void rt2800_config_channel(struct
+@@ -4279,6 +4279,45 @@ static void rt2800_config_channel(struct
rt2800_iq_calibrate(rt2x00dev, rf->channel);
}
@@ -76,7 +76,7 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
bbp = rt2800_bbp_read(rt2x00dev, 4);
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
rt2800_bbp_write(rt2x00dev, 4, bbp);
-@@ -9487,7 +9526,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9476,7 +9515,8 @@ static int rt2800_init_eeprom(struct rt2
*/
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
@@ -86,7 +86,7 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
if (rt2x00_get_field16(eeprom,
EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352))
__set_bit(CAPABILITY_EXTERNAL_PA_TX0,
-@@ -9498,6 +9538,18 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9487,6 +9527,18 @@ static int rt2800_init_eeprom(struct rt2
&rt2x00dev->cap_flags);
}
diff --git a/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-rf-self-txdc-calibration.patch b/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-rf-self-txdc-calibration.patch
index 454f55b1cf..ceec92d928 100644
--- a/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-rf-self-txdc-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-rf-self-txdc-calibration.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8349,6 +8349,58 @@ static void rt2800_init_rfcsr_5592(struc
+@@ -8338,6 +8338,58 @@ static void rt2800_init_rfcsr_5592(struc
rt2800_led_open_drain_enable(rt2x00dev);
}
@@ -59,7 +59,7 @@
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -8956,6 +9008,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -8945,6 +8997,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
@@ -69,7 +69,7 @@
}
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -243,6 +243,7 @@ void rt2800_link_tuner(struct rt2x00_dev
+@@ -232,6 +232,7 @@ void rt2800_link_tuner(struct rt2x00_dev
const u32 count);
void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev);
void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev);
@@ -79,7 +79,7 @@
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -572,6 +572,7 @@ struct rt2x00lib_ops {
+@@ -561,6 +561,7 @@ struct rt2x00lib_ops {
struct link_qual *qual, const u32 count);
void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
void (*vco_calibration) (struct rt2x00_dev *rt2x00dev);
diff --git a/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch b/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch
index 6f0d5b577f..45edee8644 100644
--- a/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8401,6 +8401,160 @@ void rt2800_rf_self_txdc_cal(struct rt2x
+@@ -8390,6 +8390,160 @@ void rt2800_rf_self_txdc_cal(struct rt2x
}
EXPORT_SYMBOL_GPL(rt2800_rf_self_txdc_cal);
@@ -161,7 +161,7 @@
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9008,6 +9162,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -8997,6 +9151,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
@@ -171,7 +171,7 @@
rt2800_bw_filter_calibration(rt2x00dev, false);
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -244,6 +244,8 @@ void rt2800_link_tuner(struct rt2x00_dev
+@@ -233,6 +233,8 @@ void rt2800_link_tuner(struct rt2x00_dev
void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev);
void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev);
void rt2800_rf_self_txdc_cal(struct rt2x00_dev *rt2x00dev);
@@ -182,7 +182,7 @@
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -573,6 +573,8 @@ struct rt2x00lib_ops {
+@@ -562,6 +562,8 @@ struct rt2x00lib_ops {
void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
void (*vco_calibration) (struct rt2x00_dev *rt2x00dev);
void (*rf_self_txdc_cal) (struct rt2x00_dev *rt2x00dev);
diff --git a/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-rxdcoc-calibration.patch b/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-rxdcoc-calibration.patch
index fbeace27da..c6b996782c 100644
--- a/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-rxdcoc-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-rxdcoc-calibration.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8555,6 +8555,71 @@ void rt2800_r_calibration(struct rt2x00_
+@@ -8544,6 +8544,71 @@ void rt2800_r_calibration(struct rt2x00_
}
EXPORT_SYMBOL_GPL(rt2800_r_calibration);
@@ -72,7 +72,7 @@
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9164,6 +9229,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9153,6 +9218,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_r_calibration(rt2x00dev);
rt2800_rf_self_txdc_cal(rt2x00dev);
@@ -82,7 +82,7 @@
}
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -246,6 +246,7 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -235,6 +235,7 @@ void rt2800_vco_calibration(struct rt2x0
void rt2800_rf_self_txdc_cal(struct rt2x00_dev *rt2x00dev);
int rt2800_calcrcalibrationcode(struct rt2x00_dev *rt2x00dev, int d1, int d2);
void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev);
@@ -92,7 +92,7 @@
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -575,6 +575,7 @@ struct rt2x00lib_ops {
+@@ -564,6 +564,7 @@ struct rt2x00lib_ops {
void (*rf_self_txdc_cal) (struct rt2x00_dev *rt2x00dev);
int (*calcrcalibrationcode) (struct rt2x00_dev *rt2x00dev, int d1, int d2);
void (*r_calibration) (struct rt2x00_dev *rt2x00dev);
diff --git a/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-rxiq-calibration.patch b/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-rxiq-calibration.patch
index f469c4ebc7..9881469d99 100644
--- a/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-rxiq-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-rxiq-calibration.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8620,6 +8620,386 @@ void rt2800_rxdcoc_calibration(struct rt
+@@ -8609,6 +8609,386 @@ void rt2800_rxdcoc_calibration(struct rt
}
EXPORT_SYMBOL_GPL(rt2800_rxdcoc_calibration);
@@ -387,7 +387,7 @@
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9232,6 +9612,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9221,6 +9601,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rxdcoc_calibration(rt2x00dev);
rt2800_bw_filter_calibration(rt2x00dev, true);
rt2800_bw_filter_calibration(rt2x00dev, false);
@@ -397,7 +397,7 @@
static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -247,6 +247,7 @@ void rt2800_rf_self_txdc_cal(struct rt2x
+@@ -236,6 +236,7 @@ void rt2800_rf_self_txdc_cal(struct rt2x
int rt2800_calcrcalibrationcode(struct rt2x00_dev *rt2x00dev, int d1, int d2);
void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev);
void rt2800_rxdcoc_calibration(struct rt2x00_dev *rt2x00dev);
@@ -407,7 +407,7 @@
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -576,6 +576,7 @@ struct rt2x00lib_ops {
+@@ -565,6 +565,7 @@ struct rt2x00lib_ops {
int (*calcrcalibrationcode) (struct rt2x00_dev *rt2x00dev, int d1, int d2);
void (*r_calibration) (struct rt2x00_dev *rt2x00dev);
void (*rxdcoc_calibration) (struct rt2x00_dev *rt2x00dev);
diff --git a/package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch b/package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch
index 31a860c1a7..d3118ebb3b 100644
--- a/package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch
+++ b/package/kernel/mac80211/patches/rt2x00/986-rt2x00-add-TX-LOFT-calibration.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9000,6 +9000,954 @@ restore_value:
+@@ -8989,6 +8989,954 @@ restore_value:
}
EXPORT_SYMBOL_GPL(rt2800_rxiq_calibration);
@@ -955,7 +955,7 @@
static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
bool set_bw, bool is_ht40)
{
-@@ -9612,6 +10560,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9601,6 +10549,7 @@ static void rt2800_init_rfcsr_6352(struc
rt2800_rxdcoc_calibration(rt2x00dev);
rt2800_bw_filter_calibration(rt2x00dev, true);
rt2800_bw_filter_calibration(rt2x00dev, false);
@@ -965,7 +965,7 @@
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -28,6 +28,16 @@
+@@ -17,6 +17,16 @@
#define WCID_START 33
#define WCID_END 222
#define STA_IDS_SIZE (WCID_END - WCID_START + 2)
@@ -982,7 +982,7 @@
/* RT2800 driver data structure */
struct rt2800_drv_data {
-@@ -248,6 +258,7 @@ int rt2800_calcrcalibrationcode(struct r
+@@ -237,6 +247,7 @@ int rt2800_calcrcalibrationcode(struct r
void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev);
void rt2800_rxdcoc_calibration(struct rt2x00_dev *rt2x00dev);
void rt2800_rxiq_calibration(struct rt2x00_dev *rt2x00dev);
@@ -992,7 +992,7 @@
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -577,6 +577,7 @@ struct rt2x00lib_ops {
+@@ -566,6 +566,7 @@ struct rt2x00lib_ops {
void (*r_calibration) (struct rt2x00_dev *rt2x00dev);
void (*rxdcoc_calibration) (struct rt2x00_dev *rt2x00dev);
void (*rxiq_calibration) (struct rt2x00_dev *rt2x00dev);
diff --git a/package/kernel/mac80211/patches/subsys/100-remove-cryptoapi-dependencies.patch b/package/kernel/mac80211/patches/subsys/100-remove-cryptoapi-dependencies.patch
index 0fe6ee196c..1a13fdc56f 100644
--- a/package/kernel/mac80211/patches/subsys/100-remove-cryptoapi-dependencies.patch
+++ b/package/kernel/mac80211/patches/subsys/100-remove-cryptoapi-dependencies.patch
@@ -20,17 +20,14 @@
ethtool.o \
--- a/net/mac80211/aead_api.c
+++ /dev/null
-@@ -1,115 +0,0 @@
+@@ -1,112 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2003-2004, Instant802 Networks, Inc.
- * Copyright 2005-2006, Devicescape Software, Inc.
- * Copyright 2014-2015, Qualcomm Atheros, Inc.
- *
- * Rewrite: Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
@@ -138,12 +135,8 @@
-}
--- a/net/mac80211/aead_api.h
+++ /dev/null
-@@ -1,27 +0,0 @@
--/*
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
+@@ -1,23 +0,0 @@
+-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef _AEAD_API_H
-#define _AEAD_API_H
@@ -168,7 +161,7 @@
-#endif /* _AEAD_API_H */
--- a/net/mac80211/aes_ccm.h
+++ b/net/mac80211/aes_ccm.h
-@@ -10,39 +10,17 @@
+@@ -7,39 +7,17 @@
#ifndef AES_CCM_H
#define AES_CCM_H
@@ -333,7 +326,7 @@
+}
--- a/net/mac80211/aes_gcm.h
+++ b/net/mac80211/aes_gcm.h
-@@ -9,38 +9,30 @@
+@@ -6,38 +6,30 @@
#ifndef AES_GCM_H
#define AES_GCM_H
@@ -385,7 +378,7 @@
#endif /* AES_GCM_H */
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
-@@ -314,7 +314,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
+@@ -311,7 +311,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
}
@@ -395,7 +388,7 @@
{
__le16 mask_fc;
int a4_included, mgmt;
-@@ -344,14 +345,8 @@ static void ccmp_special_blocks(struct s
+@@ -341,14 +342,8 @@ static void ccmp_special_blocks(struct s
else
qos_tid = 0;
@@ -412,7 +405,7 @@
/* Nonce: Nonce Flags | A2 | PN
* Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
-@@ -359,6 +354,8 @@ static void ccmp_special_blocks(struct s
+@@ -356,6 +351,8 @@ static void ccmp_special_blocks(struct s
b_0[1] = qos_tid | (mgmt << 4);
memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
@@ -421,7 +414,7 @@
/* AAD (extra authenticate-only data) / masked 802.11 header
* FC | A1 | A2 | A3 | SC | [A4] | [QC] */
-@@ -415,7 +412,7 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -412,7 +409,7 @@ static int ccmp_encrypt_skb(struct ieee8
u8 *pos;
u8 pn[6];
u64 pn64;
@@ -430,7 +423,7 @@
u8 b_0[AES_BLOCK_SIZE];
if (info->control.hw_key &&
-@@ -470,9 +467,11 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -467,9 +464,11 @@ static int ccmp_encrypt_skb(struct ieee8
return 0;
pos += IEEE80211_CCMP_HDR_LEN;
@@ -445,7 +438,7 @@
}
-@@ -545,13 +544,13 @@ ieee80211_crypto_ccmp_decrypt(struct iee
+@@ -542,13 +541,13 @@ ieee80211_crypto_ccmp_decrypt(struct iee
u8 aad[2 * AES_BLOCK_SIZE];
u8 b_0[AES_BLOCK_SIZE];
/* hardware didn't decrypt/verify MIC */
@@ -461,7 +454,7 @@
return RX_DROP_UNUSABLE;
}
-@@ -646,7 +645,7 @@ static int gcmp_encrypt_skb(struct ieee8
+@@ -643,7 +642,7 @@ static int gcmp_encrypt_skb(struct ieee8
u8 *pos;
u8 pn[6];
u64 pn64;
@@ -470,7 +463,7 @@
u8 j_0[AES_BLOCK_SIZE];
if (info->control.hw_key &&
-@@ -703,8 +702,10 @@ static int gcmp_encrypt_skb(struct ieee8
+@@ -700,8 +699,10 @@ static int gcmp_encrypt_skb(struct ieee8
pos += IEEE80211_GCMP_HDR_LEN;
gcmp_special_blocks(skb, pn, j_0, aad);
@@ -483,7 +476,7 @@
}
ieee80211_tx_result
-@@ -1127,9 +1128,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct
+@@ -1124,9 +1125,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct
struct ieee80211_key *key = tx->key;
struct ieee80211_mmie_16 *mmie;
struct ieee80211_hdr *hdr;
@@ -495,12 +488,12 @@
if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
return TX_DROP;
-@@ -1175,7 +1176,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
+@@ -1172,7 +1173,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_key *key = rx->key;
struct ieee80211_mmie_16 *mmie;
-- u8 aad[GMAC_AAD_LEN], mic[GMAC_MIC_LEN], ipn[6], nonce[GMAC_NONCE_LEN];
-+ u8 aad[20], mic[16], ipn[6], nonce[12];
+- u8 aad[GMAC_AAD_LEN], *mic, ipn[6], nonce[GMAC_NONCE_LEN];
++ u8 aad[20], *mic, ipn[6], nonce[12];
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
if (!ieee80211_is_mgmt(hdr->frame_control))
@@ -653,7 +646,7 @@
+}
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
-@@ -5,8 +5,6 @@ config MAC80211
+@@ -6,8 +6,6 @@ config MAC80211
depends on CRYPTO
depends on CRYPTO_ARC4
depends on CRYPTO_AES
@@ -664,7 +657,7 @@
---help---
--- a/net/mac80211/aes_gmac.h
+++ b/net/mac80211/aes_gmac.h
-@@ -15,10 +15,22 @@
+@@ -12,10 +12,22 @@
#define GMAC_MIC_LEN 16
#define GMAC_NONCE_LEN 12
@@ -694,7 +687,7 @@
#endif /* AES_GMAC_H */
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
-@@ -88,7 +88,7 @@ struct ieee80211_key {
+@@ -86,7 +86,7 @@ struct ieee80211_key {
* Management frames.
*/
u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN];
diff --git a/package/kernel/mac80211/patches/subsys/110-mac80211_keep_keys_on_stop_ap.patch b/package/kernel/mac80211/patches/subsys/110-mac80211_keep_keys_on_stop_ap.patch
index 6775884a34..59144f7310 100644
--- a/package/kernel/mac80211/patches/subsys/110-mac80211_keep_keys_on_stop_ap.patch
+++ b/package/kernel/mac80211/patches/subsys/110-mac80211_keep_keys_on_stop_ap.patch
@@ -2,8 +2,8 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -1067,7 +1067,6 @@ static int ieee80211_stop_ap(struct wiph
- sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF;
+@@ -1162,7 +1162,6 @@ static int ieee80211_stop_ap(struct wiph
+ sdata->vif.bss_conf.ftmr_params = NULL;
__sta_info_flush(sdata, true);
- ieee80211_free_keys(sdata, true);
diff --git a/package/kernel/mac80211/patches/subsys/120-cfg80211_allow_perm_addr_change.patch b/package/kernel/mac80211/patches/subsys/120-cfg80211_allow_perm_addr_change.patch
index ffd8807ccc..172e5b04fd 100644
--- a/package/kernel/mac80211/patches/subsys/120-cfg80211_allow_perm_addr_change.patch
+++ b/package/kernel/mac80211/patches/subsys/120-cfg80211_allow_perm_addr_change.patch
@@ -1,6 +1,6 @@
--- a/net/wireless/sysfs.c
+++ b/net/wireless/sysfs.c
-@@ -24,18 +24,35 @@ static inline struct cfg80211_registered
+@@ -23,18 +23,35 @@ static inline struct cfg80211_registered
return container_of(dev, struct cfg80211_registered_device, wiphy.dev);
}
diff --git a/package/kernel/mac80211/patches/subsys/130-disable-fils.patch b/package/kernel/mac80211/patches/subsys/130-disable-fils.patch
index f1163764a0..dd1ccc8597 100644
--- a/package/kernel/mac80211/patches/subsys/130-disable-fils.patch
+++ b/package/kernel/mac80211/patches/subsys/130-disable-fils.patch
@@ -2,7 +2,7 @@ Disable FILS support, since it pulls in crypto hash support
--- a/net/mac80211/fils_aead.h
+++ b/net/mac80211/fils_aead.h
-@@ -10,7 +10,7 @@
+@@ -7,7 +7,7 @@
#ifndef FILS_AEAD_H
#define FILS_AEAD_H
@@ -16,9 +16,9 @@ Disable FILS support, since it pulls in crypto hash support
@@ -1,4 +1,4 @@
-#if LINUX_VERSION_IS_GEQ(4,3,0)
+#if 0 /* LINUX_VERSION_IS_GEQ(4,3,0) */
+ // SPDX-License-Identifier: GPL-2.0-only
/*
* FILS AEAD for (Re)Association Request/Response frames
- * Copyright 2016, Qualcomm Atheros, Inc.
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -570,7 +570,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
diff --git a/package/kernel/mac80211/patches/subsys/131-Revert-mac80211-aes-cmac-switch-to-shash-CMAC-driver.patch b/package/kernel/mac80211/patches/subsys/131-Revert-mac80211-aes-cmac-switch-to-shash-CMAC-driver.patch
index d138b2c5ac..0c5f85236e 100644
--- a/package/kernel/mac80211/patches/subsys/131-Revert-mac80211-aes-cmac-switch-to-shash-CMAC-driver.patch
+++ b/package/kernel/mac80211/patches/subsys/131-Revert-mac80211-aes-cmac-switch-to-shash-CMAC-driver.patch
@@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/net/mac80211/aes_cmac.c
+++ b/net/mac80211/aes_cmac.c
-@@ -22,50 +22,126 @@
+@@ -19,50 +19,126 @@
#define CMAC_TLEN_256 16 /* CMAC TLen = 128 bits (16 octets) */
#define AAD_LEN 20
@@ -166,7 +166,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
}
--- a/net/mac80211/aes_cmac.h
+++ b/net/mac80211/aes_cmac.h
-@@ -10,14 +10,13 @@
+@@ -7,14 +7,13 @@
#define AES_CMAC_H
#include <linux/crypto.h>
@@ -188,7 +188,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
#endif /* AES_CMAC_H */
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
-@@ -93,7 +93,7 @@ struct ieee80211_key {
+@@ -91,7 +91,7 @@ struct ieee80211_key {
} ccmp;
struct {
u8 rx_pn[IEEE80211_CMAC_PN_LEN];
diff --git a/package/kernel/mac80211/patches/subsys/132-mac80211-remove-cmac-dependency.patch b/package/kernel/mac80211/patches/subsys/132-mac80211-remove-cmac-dependency.patch
index 9d185e61e7..a259d5816b 100644
--- a/package/kernel/mac80211/patches/subsys/132-mac80211-remove-cmac-dependency.patch
+++ b/package/kernel/mac80211/patches/subsys/132-mac80211-remove-cmac-dependency.patch
@@ -1,6 +1,6 @@
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
-@@ -5,7 +5,6 @@ config MAC80211
+@@ -6,7 +6,6 @@ config MAC80211
depends on CRYPTO
depends on CRYPTO_ARC4
depends on CRYPTO_AES
diff --git a/package/kernel/mac80211/patches/subsys/140-tweak-TSQ-setting.patch b/package/kernel/mac80211/patches/subsys/140-tweak-TSQ-setting.patch
index 42a6382209..449179a962 100644
--- a/package/kernel/mac80211/patches/subsys/140-tweak-TSQ-setting.patch
+++ b/package/kernel/mac80211/patches/subsys/140-tweak-TSQ-setting.patch
@@ -1,6 +1,6 @@
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -3797,6 +3797,12 @@ out:
+@@ -4012,6 +4012,12 @@ out:
netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
diff --git a/package/kernel/mac80211/patches/subsys/150-disable_addr_notifier.patch b/package/kernel/mac80211/patches/subsys/150-disable_addr_notifier.patch
index 1581b3400b..39000e4f05 100644
--- a/package/kernel/mac80211/patches/subsys/150-disable_addr_notifier.patch
+++ b/package/kernel/mac80211/patches/subsys/150-disable_addr_notifier.patch
@@ -1,6 +1,6 @@
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
-@@ -315,7 +315,7 @@ void ieee80211_restart_hw(struct ieee802
+@@ -313,7 +313,7 @@ void ieee80211_restart_hw(struct ieee802
}
EXPORT_SYMBOL(ieee80211_restart_hw);
@@ -9,7 +9,7 @@
static int ieee80211_ifa_changed(struct notifier_block *nb,
unsigned long data, void *arg)
{
-@@ -374,7 +374,7 @@ static int ieee80211_ifa_changed(struct
+@@ -372,7 +372,7 @@ static int ieee80211_ifa_changed(struct
}
#endif
@@ -18,7 +18,7 @@
static int ieee80211_ifa6_changed(struct notifier_block *nb,
unsigned long data, void *arg)
{
-@@ -1168,14 +1168,14 @@ int ieee80211_register_hw(struct ieee802
+@@ -1269,14 +1269,14 @@ int ieee80211_register_hw(struct ieee802
rtnl_unlock();
@@ -35,7 +35,7 @@
local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
result = register_inet6addr_notifier(&local->ifa6_notifier);
if (result)
-@@ -1184,13 +1184,13 @@ int ieee80211_register_hw(struct ieee802
+@@ -1285,13 +1285,13 @@ int ieee80211_register_hw(struct ieee802
return 0;
@@ -52,7 +52,7 @@
fail_ifa:
#endif
rtnl_lock();
-@@ -1219,10 +1219,10 @@ void ieee80211_unregister_hw(struct ieee
+@@ -1320,10 +1320,10 @@ void ieee80211_unregister_hw(struct ieee
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);
diff --git a/package/kernel/mac80211/patches/subsys/210-ap_scan.patch b/package/kernel/mac80211/patches/subsys/210-ap_scan.patch
index fcc173da69..7e237a443e 100644
--- a/package/kernel/mac80211/patches/subsys/210-ap_scan.patch
+++ b/package/kernel/mac80211/patches/subsys/210-ap_scan.patch
@@ -1,6 +1,6 @@
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -2237,7 +2237,7 @@ static int ieee80211_scan(struct wiphy *
+@@ -2312,7 +2312,7 @@ static int ieee80211_scan(struct wiphy *
* the frames sent while scanning on other channel will be
* lost)
*/
diff --git a/package/kernel/mac80211/patches/subsys/300-mac80211-add-stop-start-logic-for-software-TXQs.patch b/package/kernel/mac80211/patches/subsys/300-mac80211-add-stop-start-logic-for-software-TXQs.patch
deleted file mode 100644
index 422e9c2977..0000000000
--- a/package/kernel/mac80211/patches/subsys/300-mac80211-add-stop-start-logic-for-software-TXQs.patch
+++ /dev/null
@@ -1,272 +0,0 @@
-From: Manikanta Pubbisetty <mpubbise@codeaurora.org>
-Date: Wed, 11 Jul 2018 00:12:53 +0530
-Subject: [PATCH] mac80211: add stop/start logic for software TXQs
-
-Sometimes, it is required to stop the transmissions momentarily and
-resume it later; stopping the txqs becomes very critical in scenarios where
-the packet transmission has to be ceased completely. For example, during
-the hardware restart, during off channel operations,
-when initiating CSA(upon detecting a radar on the DFS channel), etc.
-
-The TX queue stop/start logic in mac80211 works well in stopping the TX
-when drivers make use of netdev queues, i.e, when Qdiscs in network layer
-take care of traffic scheduling. Since the devices implementing
-wake_tx_queue can run without Qdiscs, packets will be handed to mac80211
-directly without queueing them in the netdev queues.
-
-Also, mac80211 does not invoke any of the
-netif_stop_*/netif_wake_* APIs if wake_tx_queue is implemented.
-Since the queues are not stopped in this case, transmissions can continue
-and this will impact negatively on the operation of the wireless device.
-
-For example,
-During hardware restart, we stop the netdev queues so that packets are
-not sent to the driver. Since ath10k implements wake_tx_queue,
-TX queues will not be stopped and packets might reach the hardware while
-it is restarting; this can make hardware unresponsive and the only
-possible option for recovery is to reboot the entire system.
-
-There is another problem to this, it is observed that the packets
-were sent on the DFS channel for a prolonged duration after radar
-detection impacting the channel closing time.
-
-We can still invoke netif stop/wake APIs when wake_tx_queue is implemented
-but this could lead to packet drops in network layer; adding stop/start
-logic for software TXQs in mac80211 instead makes more sense; the change
-proposed adds the same in mac80211.
-
-Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -1504,6 +1504,8 @@ enum ieee80211_vif_flags {
- * @drv_priv: data area for driver use, will always be aligned to
- * sizeof(void \*).
- * @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
-+ * @txqs_stopped: per AC flag to indicate that intermediate TXQs are stopped,
-+ * protected by fq->lock.
- */
- struct ieee80211_vif {
- enum nl80211_iftype type;
-@@ -1528,6 +1530,8 @@ struct ieee80211_vif {
-
- unsigned int probe_req_reg;
-
-+ bool txqs_stopped[IEEE80211_NUM_ACS];
-+
- /* must be last */
- u8 drv_priv[0] __aligned(sizeof(void *));
- };
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -818,6 +818,7 @@ enum txq_info_flags {
- IEEE80211_TXQ_STOP,
- IEEE80211_TXQ_AMPDU,
- IEEE80211_TXQ_NO_AMSDU,
-+ IEEE80211_TXQ_STOP_NETIF_TX,
- };
-
- /**
-@@ -1226,6 +1227,7 @@ struct ieee80211_local {
-
- struct sk_buff_head pending[IEEE80211_MAX_QUEUES];
- struct tasklet_struct tx_pending_tasklet;
-+ struct tasklet_struct wake_txqs_tasklet;
-
- atomic_t agg_queue_stop[IEEE80211_MAX_QUEUES];
-
-@@ -2039,6 +2041,7 @@ void ieee80211_txq_remove_vlan(struct ie
- struct ieee80211_sub_if_data *sdata);
- void ieee80211_fill_txq_stats(struct cfg80211_txq_stats *txqstats,
- struct txq_info *txqi);
-+void ieee80211_wake_txqs(unsigned long data);
- void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
- u16 transaction, u16 auth_alg, u16 status,
- const u8 *extra, size_t extra_len, const u8 *bssid,
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -686,6 +686,10 @@ struct ieee80211_hw *ieee80211_alloc_hw_
- tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
- (unsigned long)local);
-
-+ if (ops->wake_tx_queue)
-+ tasklet_init(&local->wake_txqs_tasklet, ieee80211_wake_txqs,
-+ (unsigned long)local);
-+
- tasklet_init(&local->tasklet,
- ieee80211_tasklet_handler,
- (unsigned long) local);
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -3482,13 +3482,19 @@ struct sk_buff *ieee80211_tx_dequeue(str
- struct ieee80211_tx_info *info;
- struct ieee80211_tx_data tx;
- ieee80211_tx_result r;
-- struct ieee80211_vif *vif;
-+ struct ieee80211_vif *vif = txq->vif;
-
- spin_lock_bh(&fq->lock);
-
-- if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags))
-+ if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags) ||
-+ test_bit(IEEE80211_TXQ_STOP_NETIF_TX, &txqi->flags))
- goto out;
-
-+ if (vif->txqs_stopped[ieee80211_ac_from_tid(txq->tid)]) {
-+ set_bit(IEEE80211_TXQ_STOP_NETIF_TX, &txqi->flags);
-+ goto out;
-+ }
-+
- /* Make sure fragments stay together. */
- skb = __skb_dequeue(&txqi->frags);
- if (skb)
-@@ -3583,6 +3589,7 @@ begin:
- }
-
- IEEE80211_SKB_CB(skb)->control.vif = vif;
-+
- out:
- spin_unlock_bh(&fq->lock);
-
---- a/net/mac80211/util.c
-+++ b/net/mac80211/util.c
-@@ -240,6 +240,99 @@ __le16 ieee80211_ctstoself_duration(stru
- }
- EXPORT_SYMBOL(ieee80211_ctstoself_duration);
-
-+static void __ieee80211_wake_txqs(struct ieee80211_sub_if_data *sdata, int ac)
-+{
-+ struct ieee80211_local *local = sdata->local;
-+ struct ieee80211_vif *vif = &sdata->vif;
-+ struct fq *fq = &local->fq;
-+ struct ps_data *ps = NULL;
-+ struct txq_info *txqi;
-+ struct sta_info *sta;
-+ int i;
-+
-+ spin_lock_bh(&fq->lock);
-+
-+ if (sdata->vif.type == NL80211_IFTYPE_AP)
-+ ps = &sdata->bss->ps;
-+
-+ sdata->vif.txqs_stopped[ac] = false;
-+
-+ list_for_each_entry_rcu(sta, &local->sta_list, list) {
-+ if (sdata != sta->sdata)
-+ continue;
-+
-+ for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
-+ struct ieee80211_txq *txq = sta->sta.txq[i];
-+
-+ txqi = to_txq_info(txq);
-+
-+ if (ac != txq->ac)
-+ continue;
-+
-+ if (!test_and_clear_bit(IEEE80211_TXQ_STOP_NETIF_TX,
-+ &txqi->flags))
-+ continue;
-+
-+ spin_unlock_bh(&fq->lock);
-+ drv_wake_tx_queue(local, txqi);
-+ spin_lock_bh(&fq->lock);
-+ }
-+ }
-+
-+ if (!vif->txq)
-+ goto out;
-+
-+ txqi = to_txq_info(vif->txq);
-+
-+ if (!test_and_clear_bit(IEEE80211_TXQ_STOP_NETIF_TX, &txqi->flags) ||
-+ (ps && atomic_read(&ps->num_sta_ps)) || ac != vif->txq->ac)
-+ goto out;
-+
-+ spin_unlock_bh(&fq->lock);
-+
-+ drv_wake_tx_queue(local, txqi);
-+ return;
-+out:
-+ spin_unlock_bh(&fq->lock);
-+}
-+
-+void ieee80211_wake_txqs(unsigned long data)
-+{
-+ struct ieee80211_local *local = (struct ieee80211_local *)data;
-+ struct ieee80211_sub_if_data *sdata;
-+ int n_acs = IEEE80211_NUM_ACS;
-+ unsigned long flags;
-+ int i;
-+
-+ rcu_read_lock();
-+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
-+
-+ if (local->hw.queues < IEEE80211_NUM_ACS)
-+ n_acs = 1;
-+
-+ for (i = 0; i < local->hw.queues; i++) {
-+ if (local->queue_stop_reasons[i])
-+ continue;
-+
-+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
-+ list_for_each_entry_rcu(sdata, &local->interfaces, list) {
-+ int ac;
-+
-+ for (ac = 0; ac < n_acs; ac++) {
-+ int ac_queue = sdata->vif.hw_queue[ac];
-+
-+ if (ac_queue == i ||
-+ sdata->vif.cab_queue == i)
-+ __ieee80211_wake_txqs(sdata, ac);
-+ }
-+ }
-+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
-+ }
-+
-+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
-+ rcu_read_unlock();
-+}
-+
- void ieee80211_propagate_queue_wake(struct ieee80211_local *local, int queue)
- {
- struct ieee80211_sub_if_data *sdata;
-@@ -308,6 +401,9 @@ static void __ieee80211_wake_queue(struc
- rcu_read_unlock();
- } else
- tasklet_schedule(&local->tx_pending_tasklet);
-+
-+ if (local->ops->wake_tx_queue)
-+ tasklet_schedule(&local->wake_txqs_tasklet);
- }
-
- void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
-@@ -351,9 +447,6 @@ static void __ieee80211_stop_queue(struc
- if (__test_and_set_bit(reason, &local->queue_stop_reasons[queue]))
- return;
-
-- if (local->ops->wake_tx_queue)
-- return;
--
- if (local->hw.queues < IEEE80211_NUM_ACS)
- n_acs = 1;
-
-@@ -366,8 +459,15 @@ static void __ieee80211_stop_queue(struc
-
- for (ac = 0; ac < n_acs; ac++) {
- if (sdata->vif.hw_queue[ac] == queue ||
-- sdata->vif.cab_queue == queue)
-- netif_stop_subqueue(sdata->dev, ac);
-+ sdata->vif.cab_queue == queue) {
-+ if (!local->ops->wake_tx_queue) {
-+ netif_stop_subqueue(sdata->dev, ac);
-+ continue;
-+ }
-+ spin_lock(&local->fq.lock);
-+ sdata->vif.txqs_stopped[ac] = true;
-+ spin_unlock(&local->fq.lock);
-+ }
- }
- }
- rcu_read_unlock();
diff --git a/package/kernel/mac80211/patches/subsys/301-mac80211-do-not-call-driver-wake_tx_queue-op-during-.patch b/package/kernel/mac80211/patches/subsys/301-mac80211-do-not-call-driver-wake_tx_queue-op-during-.patch
deleted file mode 100644
index 5bbf4db23b..0000000000
--- a/package/kernel/mac80211/patches/subsys/301-mac80211-do-not-call-driver-wake_tx_queue-op-during-.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 1 Mar 2019 14:42:56 +0100
-Subject: [PATCH] mac80211: do not call driver wake_tx_queue op during reconfig
-
-There are several scenarios in which mac80211 can call drv_wake_tx_queue
-after ieee80211_restart_hw has been called and has not yet completed.
-Driver private structs are considered uninitialized until mac80211 has
-uploaded the vifs, stations and keys again, so using private tx queue
-data during that time is not safe.
-
-The driver can also not rely on drv_reconfig_complete to figure out when
-it is safe to accept drv_wake_tx_queue calls again, because it is only
-called after all tx queues are woken again.
-
-To fix this, bail out early in drv_wake_tx_queue if local->in_reconfig
-is set.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/driver-ops.h
-+++ b/net/mac80211/driver-ops.h
-@@ -1166,6 +1166,9 @@ static inline void drv_wake_tx_queue(str
- {
- struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->txq.vif);
-
-+ if (local->in_reconfig)
-+ return;
-+
- if (!check_sdata_in_driver(sdata))
- return;
-
diff --git a/package/kernel/mac80211/patches/subsys/303-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch b/package/kernel/mac80211/patches/subsys/303-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch
deleted file mode 100644
index 661fb46ea4..0000000000
--- a/package/kernel/mac80211/patches/subsys/303-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From: Chaitanya T K <chaitanya.mgit@gmail.com>
-Date: Mon, 27 Jun 2016 15:23:26 +0530
-Subject: [PATCH] mac80211: minstrel: Enable STBC and LDPC for VHT Rates
-
-If peer support reception of STBC and LDPC, enable them for better
-performance.
-
-Signed-off-by: Chaitanya TK <chaitanya.mgit@gmail.com>
----
-
---- a/include/linux/ieee80211.h
-+++ b/include/linux/ieee80211.h
-@@ -1659,6 +1659,7 @@ struct ieee80211_mu_edca_param_set {
- #define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300
- #define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400
- #define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700
-+#define IEEE80211_VHT_CAP_RXSTBC_SHIFT 8
- #define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800
- #define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000
- #define IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT 13
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -1130,7 +1130,7 @@ minstrel_ht_update_caps(void *priv, stru
- struct minstrel_ht_sta_priv *msp = priv_sta;
- struct minstrel_ht_sta *mi = &msp->ht;
- struct ieee80211_mcs_info *mcs = &sta->ht_cap.mcs;
-- u16 sta_cap = sta->ht_cap.cap;
-+ u16 ht_cap = sta->ht_cap.cap;
- struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
- struct sta_info *sinfo = container_of(sta, struct sta_info, sta);
- int use_vht;
-@@ -1138,6 +1138,7 @@ minstrel_ht_update_caps(void *priv, stru
- int ack_dur;
- int stbc;
- int i;
-+ bool ldpc = false;
-
- /* fall back to the old minstrel for legacy stations */
- if (!sta->ht_cap.ht_supported)
-@@ -1175,16 +1176,24 @@ minstrel_ht_update_caps(void *priv, stru
- }
- mi->sample_tries = 4;
-
-- /* TODO tx_flags for vht - ATM the RC API is not fine-grained enough */
- if (!use_vht) {
-- stbc = (sta_cap & IEEE80211_HT_CAP_RX_STBC) >>
-+ stbc = (ht_cap & IEEE80211_HT_CAP_RX_STBC) >>
- IEEE80211_HT_CAP_RX_STBC_SHIFT;
-- mi->tx_flags |= stbc << IEEE80211_TX_CTL_STBC_SHIFT;
-
-- if (sta_cap & IEEE80211_HT_CAP_LDPC_CODING)
-- mi->tx_flags |= IEEE80211_TX_CTL_LDPC;
-+ if (ht_cap & IEEE80211_HT_CAP_LDPC_CODING)
-+ ldpc = true;
-+ } else {
-+ stbc = (vht_cap->cap & IEEE80211_VHT_CAP_RXSTBC_MASK) >>
-+ IEEE80211_VHT_CAP_RXSTBC_SHIFT;
-+
-+ if (vht_cap->cap & IEEE80211_VHT_CAP_RXLDPC)
-+ ldpc = true;
- }
-
-+ mi->tx_flags |= stbc << IEEE80211_TX_CTL_STBC_SHIFT;
-+ if (ldpc)
-+ mi->tx_flags |= IEEE80211_TX_CTL_LDPC;
-+
- for (i = 0; i < ARRAY_SIZE(mi->groups); i++) {
- u32 gflags = minstrel_mcs_groups[i].flags;
- int bw, nss;
-@@ -1197,10 +1206,10 @@ minstrel_ht_update_caps(void *priv, stru
-
- if (gflags & IEEE80211_TX_RC_SHORT_GI) {
- if (gflags & IEEE80211_TX_RC_40_MHZ_WIDTH) {
-- if (!(sta_cap & IEEE80211_HT_CAP_SGI_40))
-+ if (!(ht_cap & IEEE80211_HT_CAP_SGI_40))
- continue;
- } else {
-- if (!(sta_cap & IEEE80211_HT_CAP_SGI_20))
-+ if (!(ht_cap & IEEE80211_HT_CAP_SGI_20))
- continue;
- }
- }
diff --git a/package/kernel/mac80211/patches/subsys/304-mac80211-minstrel-remove-unnecessary-debugfs-cleanup.patch b/package/kernel/mac80211/patches/subsys/304-mac80211-minstrel-remove-unnecessary-debugfs-cleanup.patch
deleted file mode 100644
index 95d4f294aa..0000000000
--- a/package/kernel/mac80211/patches/subsys/304-mac80211-minstrel-remove-unnecessary-debugfs-cleanup.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 10 Feb 2018 12:41:51 +0100
-Subject: [PATCH] mac80211: minstrel: remove unnecessary debugfs cleanup
- code
-
-debugfs entries are cleaned up by debugfs_remove_recursive already.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/rc80211_minstrel.c
-+++ b/net/mac80211/rc80211_minstrel.c
-@@ -689,8 +689,8 @@ minstrel_alloc(struct ieee80211_hw *hw,
-
- #ifdef CPTCFG_MAC80211_DEBUGFS
- mp->fixed_rate_idx = (u32) -1;
-- mp->dbg_fixed_rate = debugfs_create_u32("fixed_rate_idx",
-- 0666, debugfsdir, &mp->fixed_rate_idx);
-+ debugfs_create_u32("fixed_rate_idx", S_IRUGO | S_IWUGO, debugfsdir,
-+ &mp->fixed_rate_idx);
- #endif
-
- minstrel_init_cck_rates(mp);
-@@ -701,9 +701,6 @@ minstrel_alloc(struct ieee80211_hw *hw,
- static void
- minstrel_free(void *priv)
- {
--#ifdef CPTCFG_MAC80211_DEBUGFS
-- debugfs_remove(((struct minstrel_priv *)priv)->dbg_fixed_rate);
--#endif
- kfree(priv);
- }
-
-@@ -735,7 +732,6 @@ const struct rate_control_ops mac80211_m
- .free_sta = minstrel_free_sta,
- #ifdef CPTCFG_MAC80211_DEBUGFS
- .add_sta_debugfs = minstrel_add_sta_debugfs,
-- .remove_sta_debugfs = minstrel_remove_sta_debugfs,
- #endif
- .get_expected_throughput = minstrel_get_expected_throughput,
- };
---- a/net/mac80211/rc80211_minstrel.h
-+++ b/net/mac80211/rc80211_minstrel.h
-@@ -109,11 +109,6 @@ struct minstrel_sta_info {
-
- /* sampling table */
- u8 *sample_table;
--
--#ifdef CPTCFG_MAC80211_DEBUGFS
-- struct dentry *dbg_stats;
-- struct dentry *dbg_stats_csv;
--#endif
- };
-
- struct minstrel_priv {
-@@ -137,7 +132,6 @@ struct minstrel_priv {
- * - setting will be applied on next update
- */
- u32 fixed_rate_idx;
-- struct dentry *dbg_fixed_rate;
- #endif
- };
-
-@@ -156,7 +150,6 @@ minstrel_get_ewmsd10(struct minstrel_rat
-
- extern const struct rate_control_ops mac80211_minstrel;
- void minstrel_add_sta_debugfs(void *priv, void *priv_sta, struct dentry *dir);
--void minstrel_remove_sta_debugfs(void *priv, void *priv_sta);
-
- /* Recalculate success probabilities and counters for a given rate using EWMA */
- void minstrel_calc_rate_stats(struct minstrel_rate_stats *mrs);
---- a/net/mac80211/rc80211_minstrel_debugfs.c
-+++ b/net/mac80211/rc80211_minstrel_debugfs.c
-@@ -214,19 +214,7 @@ minstrel_add_sta_debugfs(void *priv, voi
- {
- struct minstrel_sta_info *mi = priv_sta;
-
-- mi->dbg_stats = debugfs_create_file("rc_stats", 0444, dir, mi,
-- &minstrel_stat_fops);
--
-- mi->dbg_stats_csv = debugfs_create_file("rc_stats_csv", 0444, dir, mi,
-- &minstrel_stat_csv_fops);
--}
--
--void
--minstrel_remove_sta_debugfs(void *priv, void *priv_sta)
--{
-- struct minstrel_sta_info *mi = priv_sta;
--
-- debugfs_remove(mi->dbg_stats);
--
-- debugfs_remove(mi->dbg_stats_csv);
-+ debugfs_create_file("rc_stats", S_IRUGO, dir, mi, &minstrel_stat_fops);
-+ debugfs_create_file("rc_stats_csv", S_IRUGO, dir, mi,
-+ &minstrel_stat_csv_fops);
- }
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -1393,7 +1393,6 @@ static const struct rate_control_ops mac
- .free = minstrel_ht_free,
- #ifdef CPTCFG_MAC80211_DEBUGFS
- .add_sta_debugfs = minstrel_ht_add_sta_debugfs,
-- .remove_sta_debugfs = minstrel_ht_remove_sta_debugfs,
- #endif
- .get_expected_throughput = minstrel_ht_get_expected_throughput,
- };
---- a/net/mac80211/rc80211_minstrel_ht.h
-+++ b/net/mac80211/rc80211_minstrel_ht.h
-@@ -110,17 +110,12 @@ struct minstrel_ht_sta_priv {
- struct minstrel_ht_sta ht;
- struct minstrel_sta_info legacy;
- };
--#ifdef CPTCFG_MAC80211_DEBUGFS
-- struct dentry *dbg_stats;
-- struct dentry *dbg_stats_csv;
--#endif
- void *ratelist;
- void *sample_table;
- bool is_ht;
- };
-
- void minstrel_ht_add_sta_debugfs(void *priv, void *priv_sta, struct dentry *dir);
--void minstrel_ht_remove_sta_debugfs(void *priv, void *priv_sta);
- int minstrel_ht_get_tp_avg(struct minstrel_ht_sta *mi, int group, int rate,
- int prob_ewma);
-
---- a/net/mac80211/rc80211_minstrel_ht_debugfs.c
-+++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c
-@@ -303,17 +303,8 @@ minstrel_ht_add_sta_debugfs(void *priv,
- {
- struct minstrel_ht_sta_priv *msp = priv_sta;
-
-- msp->dbg_stats = debugfs_create_file("rc_stats", 0444, dir, msp,
-- &minstrel_ht_stat_fops);
-- msp->dbg_stats_csv = debugfs_create_file("rc_stats_csv", 0444, dir, msp,
-- &minstrel_ht_stat_csv_fops);
--}
--
--void
--minstrel_ht_remove_sta_debugfs(void *priv, void *priv_sta)
--{
-- struct minstrel_ht_sta_priv *msp = priv_sta;
--
-- debugfs_remove(msp->dbg_stats);
-- debugfs_remove(msp->dbg_stats_csv);
-+ debugfs_create_file("rc_stats", S_IRUGO, dir, msp,
-+ &minstrel_ht_stat_fops);
-+ debugfs_create_file("rc_stats_csv", S_IRUGO, dir, msp,
-+ &minstrel_ht_stat_csv_fops);
- }
diff --git a/package/kernel/mac80211/patches/subsys/305-mac80211-minstrel-merge-with-minstrel_ht-always-enab.patch b/package/kernel/mac80211/patches/subsys/305-mac80211-minstrel-merge-with-minstrel_ht-always-enab.patch
deleted file mode 100644
index 9a233753ad..0000000000
--- a/package/kernel/mac80211/patches/subsys/305-mac80211-minstrel-merge-with-minstrel_ht-always-enab.patch
+++ /dev/null
@@ -1,575 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 10 Feb 2018 12:43:30 +0100
-Subject: [PATCH] mac80211: minstrel: merge with minstrel_ht, always enable
- VHT support
-
-Legacy-only devices are not very common and the overhead of the extra
-code for HT and VHT rates is not big enough to justify all those extra
-lines of code to make it optional.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/Kconfig
-+++ b/net/mac80211/Kconfig
-@@ -25,20 +25,6 @@ config MAC80211_RC_MINSTREL
- ---help---
- This option enables the 'minstrel' TX rate control algorithm
-
--config MAC80211_RC_MINSTREL_HT
-- bool "Minstrel 802.11n support" if EXPERT
-- depends on MAC80211_RC_MINSTREL
-- default y
-- ---help---
-- This option enables the 'minstrel_ht' TX rate control algorithm
--
--config MAC80211_RC_MINSTREL_VHT
-- bool "Minstrel 802.11ac support" if EXPERT
-- depends on MAC80211_RC_MINSTREL_HT
-- default n
-- ---help---
-- This option enables VHT in the 'minstrel_ht' TX rate control algorithm
--
- choice
- prompt "Default rate control algorithm"
- depends on MAC80211_HAS_RC
-@@ -60,8 +46,7 @@ endchoice
-
- config MAC80211_RC_DEFAULT
- string
-- default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL && MAC80211_RC_MINSTREL_HT
-- default "minstrel" if MAC80211_RC_DEFAULT_MINSTREL
-+ default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL
- default ""
-
- endif
---- a/net/mac80211/Makefile
-+++ b/net/mac80211/Makefile
-@@ -52,13 +52,14 @@ mac80211-$(CONFIG_PM) += pm.o
-
- CFLAGS_trace.o := -I$(src)
-
--rc80211_minstrel-y := rc80211_minstrel.o
--rc80211_minstrel-$(CPTCFG_MAC80211_DEBUGFS) += rc80211_minstrel_debugfs.o
-+rc80211_minstrel-y := \
-+ rc80211_minstrel.o \
-+ rc80211_minstrel_ht.o
-
--rc80211_minstrel_ht-y := rc80211_minstrel_ht.o
--rc80211_minstrel_ht-$(CPTCFG_MAC80211_DEBUGFS) += rc80211_minstrel_ht_debugfs.o
-+rc80211_minstrel-$(CPTCFG_MAC80211_DEBUGFS) += \
-+ rc80211_minstrel_debugfs.o \
-+ rc80211_minstrel_ht_debugfs.o
-
- mac80211-$(CPTCFG_MAC80211_RC_MINSTREL) += $(rc80211_minstrel-y)
--mac80211-$(CPTCFG_MAC80211_RC_MINSTREL_HT) += $(rc80211_minstrel_ht-y)
-
- ccflags-y += -DDEBUG
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -1308,18 +1308,12 @@ static int __init ieee80211_init(void)
- if (ret)
- return ret;
-
-- ret = rc80211_minstrel_ht_init();
-- if (ret)
-- goto err_minstrel;
--
- ret = ieee80211_iface_init();
- if (ret)
- goto err_netdev;
-
- return 0;
- err_netdev:
-- rc80211_minstrel_ht_exit();
-- err_minstrel:
- rc80211_minstrel_exit();
-
- return ret;
-@@ -1327,7 +1321,6 @@ static int __init ieee80211_init(void)
-
- static void __exit ieee80211_exit(void)
- {
-- rc80211_minstrel_ht_exit();
- rc80211_minstrel_exit();
-
- ieee80211s_stop();
---- a/net/mac80211/rate.h
-+++ b/net/mac80211/rate.h
-@@ -95,18 +95,5 @@ static inline void rc80211_minstrel_exit
- }
- #endif
-
--#ifdef CPTCFG_MAC80211_RC_MINSTREL_HT
--int rc80211_minstrel_ht_init(void);
--void rc80211_minstrel_ht_exit(void);
--#else
--static inline int rc80211_minstrel_ht_init(void)
--{
-- return 0;
--}
--static inline void rc80211_minstrel_ht_exit(void)
--{
--}
--#endif
--
-
- #endif /* IEEE80211_RATE_H */
---- a/net/mac80211/rc80211_minstrel.c
-+++ b/net/mac80211/rc80211_minstrel.c
-@@ -572,138 +572,6 @@ minstrel_rate_init(void *priv, struct ie
- minstrel_update_rates(mp, mi);
- }
-
--static void *
--minstrel_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp)
--{
-- struct ieee80211_supported_band *sband;
-- struct minstrel_sta_info *mi;
-- struct minstrel_priv *mp = priv;
-- struct ieee80211_hw *hw = mp->hw;
-- int max_rates = 0;
-- int i;
--
-- mi = kzalloc(sizeof(struct minstrel_sta_info), gfp);
-- if (!mi)
-- return NULL;
--
-- for (i = 0; i < NUM_NL80211_BANDS; i++) {
-- sband = hw->wiphy->bands[i];
-- if (sband && sband->n_bitrates > max_rates)
-- max_rates = sband->n_bitrates;
-- }
--
-- mi->r = kcalloc(max_rates, sizeof(struct minstrel_rate), gfp);
-- if (!mi->r)
-- goto error;
--
-- mi->sample_table = kmalloc_array(max_rates, SAMPLE_COLUMNS, gfp);
-- if (!mi->sample_table)
-- goto error1;
--
-- mi->last_stats_update = jiffies;
-- return mi;
--
--error1:
-- kfree(mi->r);
--error:
-- kfree(mi);
-- return NULL;
--}
--
--static void
--minstrel_free_sta(void *priv, struct ieee80211_sta *sta, void *priv_sta)
--{
-- struct minstrel_sta_info *mi = priv_sta;
--
-- kfree(mi->sample_table);
-- kfree(mi->r);
-- kfree(mi);
--}
--
--static void
--minstrel_init_cck_rates(struct minstrel_priv *mp)
--{
-- static const int bitrates[4] = { 10, 20, 55, 110 };
-- struct ieee80211_supported_band *sband;
-- u32 rate_flags = ieee80211_chandef_rate_flags(&mp->hw->conf.chandef);
-- int i, j;
--
-- sband = mp->hw->wiphy->bands[NL80211_BAND_2GHZ];
-- if (!sband)
-- return;
--
-- for (i = 0, j = 0; i < sband->n_bitrates; i++) {
-- struct ieee80211_rate *rate = &sband->bitrates[i];
--
-- if (rate->flags & IEEE80211_RATE_ERP_G)
-- continue;
--
-- if ((rate_flags & sband->bitrates[i].flags) != rate_flags)
-- continue;
--
-- for (j = 0; j < ARRAY_SIZE(bitrates); j++) {
-- if (rate->bitrate != bitrates[j])
-- continue;
--
-- mp->cck_rates[j] = i;
-- break;
-- }
-- }
--}
--
--static void *
--minstrel_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
--{
-- struct minstrel_priv *mp;
--
-- mp = kzalloc(sizeof(struct minstrel_priv), GFP_ATOMIC);
-- if (!mp)
-- return NULL;
--
-- /* contention window settings
-- * Just an approximation. Using the per-queue values would complicate
-- * the calculations and is probably unnecessary */
-- mp->cw_min = 15;
-- mp->cw_max = 1023;
--
-- /* number of packets (in %) to use for sampling other rates
-- * sample less often for non-mrr packets, because the overhead
-- * is much higher than with mrr */
-- mp->lookaround_rate = 5;
-- mp->lookaround_rate_mrr = 10;
--
-- /* maximum time that the hw is allowed to stay in one MRR segment */
-- mp->segment_size = 6000;
--
-- if (hw->max_rate_tries > 0)
-- mp->max_retry = hw->max_rate_tries;
-- else
-- /* safe default, does not necessarily have to match hw properties */
-- mp->max_retry = 7;
--
-- if (hw->max_rates >= 4)
-- mp->has_mrr = true;
--
-- mp->hw = hw;
-- mp->update_interval = 100;
--
--#ifdef CPTCFG_MAC80211_DEBUGFS
-- mp->fixed_rate_idx = (u32) -1;
-- debugfs_create_u32("fixed_rate_idx", S_IRUGO | S_IWUGO, debugfsdir,
-- &mp->fixed_rate_idx);
--#endif
--
-- minstrel_init_cck_rates(mp);
--
-- return mp;
--}
--
--static void
--minstrel_free(void *priv)
--{
-- kfree(priv);
--}
--
- static u32 minstrel_get_expected_throughput(void *priv_sta)
- {
- struct minstrel_sta_info *mi = priv_sta;
-@@ -722,28 +590,8 @@ static u32 minstrel_get_expected_through
- }
-
- const struct rate_control_ops mac80211_minstrel = {
-- .name = "minstrel",
- .tx_status_ext = minstrel_tx_status,
- .get_rate = minstrel_get_rate,
- .rate_init = minstrel_rate_init,
-- .alloc = minstrel_alloc,
-- .free = minstrel_free,
-- .alloc_sta = minstrel_alloc_sta,
-- .free_sta = minstrel_free_sta,
--#ifdef CPTCFG_MAC80211_DEBUGFS
-- .add_sta_debugfs = minstrel_add_sta_debugfs,
--#endif
- .get_expected_throughput = minstrel_get_expected_throughput,
- };
--
--int __init
--rc80211_minstrel_init(void)
--{
-- return ieee80211_rate_control_register(&mac80211_minstrel);
--}
--
--void
--rc80211_minstrel_exit(void)
--{
-- ieee80211_rate_control_unregister(&mac80211_minstrel);
--}
---- a/net/mac80211/rc80211_minstrel.h
-+++ b/net/mac80211/rc80211_minstrel.h
-@@ -158,7 +158,5 @@ int minstrel_get_tp_avg(struct minstrel_
- /* debugfs */
- int minstrel_stats_open(struct inode *inode, struct file *file);
- int minstrel_stats_csv_open(struct inode *inode, struct file *file);
--ssize_t minstrel_stats_read(struct file *file, char __user *buf, size_t len, loff_t *ppos);
--int minstrel_stats_release(struct inode *inode, struct file *file);
-
- #endif
---- a/net/mac80211/rc80211_minstrel_debugfs.c
-+++ b/net/mac80211/rc80211_minstrel_debugfs.c
-@@ -54,22 +54,6 @@
- #include <net/mac80211.h>
- #include "rc80211_minstrel.h"
-
--ssize_t
--minstrel_stats_read(struct file *file, char __user *buf, size_t len, loff_t *ppos)
--{
-- struct minstrel_debugfs_info *ms;
--
-- ms = file->private_data;
-- return simple_read_from_buffer(buf, len, ppos, ms->buf, ms->len);
--}
--
--int
--minstrel_stats_release(struct inode *inode, struct file *file)
--{
-- kfree(file->private_data);
-- return 0;
--}
--
- int
- minstrel_stats_open(struct inode *inode, struct file *file)
- {
-@@ -135,14 +119,6 @@ minstrel_stats_open(struct inode *inode,
- return 0;
- }
-
--static const struct file_operations minstrel_stat_fops = {
-- .owner = THIS_MODULE,
-- .open = minstrel_stats_open,
-- .read = minstrel_stats_read,
-- .release = minstrel_stats_release,
-- .llseek = default_llseek,
--};
--
- int
- minstrel_stats_csv_open(struct inode *inode, struct file *file)
- {
-@@ -200,21 +176,3 @@ minstrel_stats_csv_open(struct inode *in
-
- return 0;
- }
--
--static const struct file_operations minstrel_stat_csv_fops = {
-- .owner = THIS_MODULE,
-- .open = minstrel_stats_csv_open,
-- .read = minstrel_stats_read,
-- .release = minstrel_stats_release,
-- .llseek = default_llseek,
--};
--
--void
--minstrel_add_sta_debugfs(void *priv, void *priv_sta, struct dentry *dir)
--{
-- struct minstrel_sta_info *mi = priv_sta;
--
-- debugfs_create_file("rc_stats", S_IRUGO, dir, mi, &minstrel_stat_fops);
-- debugfs_create_file("rc_stats_csv", S_IRUGO, dir, mi,
-- &minstrel_stat_csv_fops);
--}
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -137,12 +137,10 @@
- } \
- }
-
--#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
- static bool minstrel_vht_only = true;
- module_param(minstrel_vht_only, bool, 0644);
- MODULE_PARM_DESC(minstrel_vht_only,
- "Use only VHT rates when VHT is supported by sta.");
--#endif
-
- /*
- * To enable sufficiently targeted rate sampling, MCS rates are divided into
-@@ -171,7 +169,6 @@ const struct mcs_group minstrel_mcs_grou
-
- CCK_GROUP,
-
--#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
- VHT_GROUP(1, 0, BW_20),
- VHT_GROUP(2, 0, BW_20),
- VHT_GROUP(3, 0, BW_20),
-@@ -195,7 +192,6 @@ const struct mcs_group minstrel_mcs_grou
- VHT_GROUP(1, 1, BW_80),
- VHT_GROUP(2, 1, BW_80),
- VHT_GROUP(3, 1, BW_80),
--#endif
- };
-
- static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES] __read_mostly;
-@@ -1146,12 +1142,10 @@ minstrel_ht_update_caps(void *priv, stru
-
- BUILD_BUG_ON(ARRAY_SIZE(minstrel_mcs_groups) != MINSTREL_GROUPS_NB);
-
--#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
- if (vht_cap->vht_supported)
- use_vht = vht_cap->vht_mcs.tx_mcs_map != cpu_to_le16(~0);
- else
--#endif
-- use_vht = 0;
-+ use_vht = 0;
-
- msp->is_ht = true;
- memset(mi, 0, sizeof(*mi));
-@@ -1226,10 +1220,9 @@ minstrel_ht_update_caps(void *priv, stru
-
- /* HT rate */
- if (gflags & IEEE80211_TX_RC_MCS) {
--#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
- if (use_vht && minstrel_vht_only)
- continue;
--#endif
-+
- mi->supported[i] = mcs->rx_mask[nss - 1];
- if (mi->supported[i])
- n_supported++;
-@@ -1349,16 +1342,88 @@ minstrel_ht_free_sta(void *priv, struct
- kfree(msp);
- }
-
-+static void
-+minstrel_ht_init_cck_rates(struct minstrel_priv *mp)
-+{
-+ static const int bitrates[4] = { 10, 20, 55, 110 };
-+ struct ieee80211_supported_band *sband;
-+ u32 rate_flags = ieee80211_chandef_rate_flags(&mp->hw->conf.chandef);
-+ int i, j;
-+
-+ sband = mp->hw->wiphy->bands[NL80211_BAND_2GHZ];
-+ if (!sband)
-+ return;
-+
-+ for (i = 0, j = 0; i < sband->n_bitrates; i++) {
-+ struct ieee80211_rate *rate = &sband->bitrates[i];
-+
-+ if (rate->flags & IEEE80211_RATE_ERP_G)
-+ continue;
-+
-+ if ((rate_flags & sband->bitrates[i].flags) != rate_flags)
-+ continue;
-+
-+ for (j = 0; j < ARRAY_SIZE(bitrates); j++) {
-+ if (rate->bitrate != bitrates[j])
-+ continue;
-+
-+ mp->cck_rates[j] = i;
-+ break;
-+ }
-+ }
-+}
-+
- static void *
- minstrel_ht_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
- {
-- return mac80211_minstrel.alloc(hw, debugfsdir);
-+ struct minstrel_priv *mp;
-+
-+ mp = kzalloc(sizeof(struct minstrel_priv), GFP_ATOMIC);
-+ if (!mp)
-+ return NULL;
-+
-+ /* contention window settings
-+ * Just an approximation. Using the per-queue values would complicate
-+ * the calculations and is probably unnecessary */
-+ mp->cw_min = 15;
-+ mp->cw_max = 1023;
-+
-+ /* number of packets (in %) to use for sampling other rates
-+ * sample less often for non-mrr packets, because the overhead
-+ * is much higher than with mrr */
-+ mp->lookaround_rate = 5;
-+ mp->lookaround_rate_mrr = 10;
-+
-+ /* maximum time that the hw is allowed to stay in one MRR segment */
-+ mp->segment_size = 6000;
-+
-+ if (hw->max_rate_tries > 0)
-+ mp->max_retry = hw->max_rate_tries;
-+ else
-+ /* safe default, does not necessarily have to match hw properties */
-+ mp->max_retry = 7;
-+
-+ if (hw->max_rates >= 4)
-+ mp->has_mrr = true;
-+
-+ mp->hw = hw;
-+ mp->update_interval = 100;
-+
-+#ifdef CPTCFG_MAC80211_DEBUGFS
-+ mp->fixed_rate_idx = (u32) -1;
-+ debugfs_create_u32("fixed_rate_idx", S_IRUGO | S_IWUGO, debugfsdir,
-+ &mp->fixed_rate_idx);
-+#endif
-+
-+ minstrel_ht_init_cck_rates(mp);
-+
-+ return mp;
- }
-
- static void
- minstrel_ht_free(void *priv)
- {
-- mac80211_minstrel.free(priv);
-+ kfree(priv);
- }
-
- static u32 minstrel_ht_get_expected_throughput(void *priv_sta)
-@@ -1417,14 +1482,14 @@ static void __init init_sample_table(voi
- }
-
- int __init
--rc80211_minstrel_ht_init(void)
-+rc80211_minstrel_init(void)
- {
- init_sample_table();
- return ieee80211_rate_control_register(&mac80211_minstrel_ht);
- }
-
- void
--rc80211_minstrel_ht_exit(void)
-+rc80211_minstrel_exit(void)
- {
- ieee80211_rate_control_unregister(&mac80211_minstrel_ht);
- }
---- a/net/mac80211/rc80211_minstrel_ht.h
-+++ b/net/mac80211/rc80211_minstrel_ht.h
-@@ -15,11 +15,7 @@
- */
- #define MINSTREL_MAX_STREAMS 3
- #define MINSTREL_HT_STREAM_GROUPS 4 /* BW(=2) * SGI(=2) */
--#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
- #define MINSTREL_VHT_STREAM_GROUPS 6 /* BW(=3) * SGI(=2) */
--#else
--#define MINSTREL_VHT_STREAM_GROUPS 0
--#endif
-
- #define MINSTREL_HT_GROUPS_NB (MINSTREL_MAX_STREAMS * \
- MINSTREL_HT_STREAM_GROUPS)
-@@ -34,11 +30,7 @@
- #define MINSTREL_CCK_GROUP (MINSTREL_HT_GROUP_0 + MINSTREL_HT_GROUPS_NB)
- #define MINSTREL_VHT_GROUP_0 (MINSTREL_CCK_GROUP + 1)
-
--#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
- #define MCS_GROUP_RATES 10
--#else
--#define MCS_GROUP_RATES 8
--#endif
-
- struct mcs_group {
- u32 flags;
---- a/net/mac80211/rc80211_minstrel_ht_debugfs.c
-+++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c
-@@ -15,6 +15,22 @@
- #include "rc80211_minstrel.h"
- #include "rc80211_minstrel_ht.h"
-
-+static ssize_t
-+minstrel_stats_read(struct file *file, char __user *buf, size_t len, loff_t *ppos)
-+{
-+ struct minstrel_debugfs_info *ms;
-+
-+ ms = file->private_data;
-+ return simple_read_from_buffer(buf, len, ppos, ms->buf, ms->len);
-+}
-+
-+static int
-+minstrel_stats_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
- static char *
- minstrel_ht_stats_dump(struct minstrel_ht_sta *mi, int i, char *p)
- {
diff --git a/package/kernel/mac80211/patches/subsys/306-mac80211-minstrel-reduce-minstrel_mcs_groups-size.patch b/package/kernel/mac80211/patches/subsys/306-mac80211-minstrel-reduce-minstrel_mcs_groups-size.patch
deleted file mode 100644
index 02a0ca0a52..0000000000
--- a/package/kernel/mac80211/patches/subsys/306-mac80211-minstrel-reduce-minstrel_mcs_groups-size.patch
+++ /dev/null
@@ -1,368 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 10 Feb 2018 12:45:47 +0100
-Subject: [PATCH] mac80211: minstrel: reduce minstrel_mcs_groups size
-
-By storing a shift value for all duration values of a group, we can
-reduce precision by a neglegible amount to make it fit into a u16 value.
-This improves cache footprint and reduces size:
-
-Before:
- text data bss dec hex filename
- 10024 116 0 10140 279c rc80211_minstrel_ht.o
-
-After:
- text data bss dec hex filename
- 9368 116 0 9484 250c rc80211_minstrel_ht.o
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -52,22 +52,23 @@
- _streams - 1
-
- /* MCS rate information for an MCS group */
--#define MCS_GROUP(_streams, _sgi, _ht40) \
-+#define MCS_GROUP(_streams, _sgi, _ht40, _s) \
- [GROUP_IDX(_streams, _sgi, _ht40)] = { \
- .streams = _streams, \
-+ .shift = _s, \
- .flags = \
- IEEE80211_TX_RC_MCS | \
- (_sgi ? IEEE80211_TX_RC_SHORT_GI : 0) | \
- (_ht40 ? IEEE80211_TX_RC_40_MHZ_WIDTH : 0), \
- .duration = { \
-- MCS_DURATION(_streams, _sgi, _ht40 ? 54 : 26), \
-- MCS_DURATION(_streams, _sgi, _ht40 ? 108 : 52), \
-- MCS_DURATION(_streams, _sgi, _ht40 ? 162 : 78), \
-- MCS_DURATION(_streams, _sgi, _ht40 ? 216 : 104), \
-- MCS_DURATION(_streams, _sgi, _ht40 ? 324 : 156), \
-- MCS_DURATION(_streams, _sgi, _ht40 ? 432 : 208), \
-- MCS_DURATION(_streams, _sgi, _ht40 ? 486 : 234), \
-- MCS_DURATION(_streams, _sgi, _ht40 ? 540 : 260) \
-+ MCS_DURATION(_streams, _sgi, _ht40 ? 54 : 26) >> _s, \
-+ MCS_DURATION(_streams, _sgi, _ht40 ? 108 : 52) >> _s, \
-+ MCS_DURATION(_streams, _sgi, _ht40 ? 162 : 78) >> _s, \
-+ MCS_DURATION(_streams, _sgi, _ht40 ? 216 : 104) >> _s, \
-+ MCS_DURATION(_streams, _sgi, _ht40 ? 324 : 156) >> _s, \
-+ MCS_DURATION(_streams, _sgi, _ht40 ? 432 : 208) >> _s, \
-+ MCS_DURATION(_streams, _sgi, _ht40 ? 486 : 234) >> _s, \
-+ MCS_DURATION(_streams, _sgi, _ht40 ? 540 : 260) >> _s \
- } \
- }
-
-@@ -80,9 +81,10 @@
- #define BW2VBPS(_bw, r3, r2, r1) \
- (_bw == BW_80 ? r3 : _bw == BW_40 ? r2 : r1)
-
--#define VHT_GROUP(_streams, _sgi, _bw) \
-+#define VHT_GROUP(_streams, _sgi, _bw, _s) \
- [VHT_GROUP_IDX(_streams, _sgi, _bw)] = { \
- .streams = _streams, \
-+ .shift = _s, \
- .flags = \
- IEEE80211_TX_RC_VHT_MCS | \
- (_sgi ? IEEE80211_TX_RC_SHORT_GI : 0) | \
-@@ -90,25 +92,25 @@
- _bw == BW_40 ? IEEE80211_TX_RC_40_MHZ_WIDTH : 0), \
- .duration = { \
- MCS_DURATION(_streams, _sgi, \
-- BW2VBPS(_bw, 117, 54, 26)), \
-+ BW2VBPS(_bw, 117, 54, 26)) >> _s, \
- MCS_DURATION(_streams, _sgi, \
-- BW2VBPS(_bw, 234, 108, 52)), \
-+ BW2VBPS(_bw, 234, 108, 52)) >> _s, \
- MCS_DURATION(_streams, _sgi, \
-- BW2VBPS(_bw, 351, 162, 78)), \
-+ BW2VBPS(_bw, 351, 162, 78)) >> _s, \
- MCS_DURATION(_streams, _sgi, \
-- BW2VBPS(_bw, 468, 216, 104)), \
-+ BW2VBPS(_bw, 468, 216, 104)) >> _s, \
- MCS_DURATION(_streams, _sgi, \
-- BW2VBPS(_bw, 702, 324, 156)), \
-+ BW2VBPS(_bw, 702, 324, 156)) >> _s, \
- MCS_DURATION(_streams, _sgi, \
-- BW2VBPS(_bw, 936, 432, 208)), \
-+ BW2VBPS(_bw, 936, 432, 208)) >> _s, \
- MCS_DURATION(_streams, _sgi, \
-- BW2VBPS(_bw, 1053, 486, 234)), \
-+ BW2VBPS(_bw, 1053, 486, 234)) >> _s, \
- MCS_DURATION(_streams, _sgi, \
-- BW2VBPS(_bw, 1170, 540, 260)), \
-+ BW2VBPS(_bw, 1170, 540, 260)) >> _s, \
- MCS_DURATION(_streams, _sgi, \
-- BW2VBPS(_bw, 1404, 648, 312)), \
-+ BW2VBPS(_bw, 1404, 648, 312)) >> _s, \
- MCS_DURATION(_streams, _sgi, \
-- BW2VBPS(_bw, 1560, 720, 346)) \
-+ BW2VBPS(_bw, 1560, 720, 346)) >> _s \
- } \
- }
-
-@@ -121,19 +123,20 @@
- (CCK_DURATION((_bitrate > 10 ? 20 : 10), false, 60) + \
- CCK_DURATION(_bitrate, _short, AVG_PKT_SIZE))
-
--#define CCK_DURATION_LIST(_short) \
-- CCK_ACK_DURATION(10, _short), \
-- CCK_ACK_DURATION(20, _short), \
-- CCK_ACK_DURATION(55, _short), \
-- CCK_ACK_DURATION(110, _short)
-+#define CCK_DURATION_LIST(_short, _s) \
-+ CCK_ACK_DURATION(10, _short) >> _s, \
-+ CCK_ACK_DURATION(20, _short) >> _s, \
-+ CCK_ACK_DURATION(55, _short) >> _s, \
-+ CCK_ACK_DURATION(110, _short) >> _s
-
--#define CCK_GROUP \
-+#define CCK_GROUP(_s) \
- [MINSTREL_CCK_GROUP] = { \
- .streams = 0, \
- .flags = 0, \
-+ .shift = _s, \
- .duration = { \
-- CCK_DURATION_LIST(false), \
-- CCK_DURATION_LIST(true) \
-+ CCK_DURATION_LIST(false, _s), \
-+ CCK_DURATION_LIST(true, _s) \
- } \
- }
-
-@@ -151,47 +154,47 @@ MODULE_PARM_DESC(minstrel_vht_only,
- * BW -> SGI -> #streams
- */
- const struct mcs_group minstrel_mcs_groups[] = {
-- MCS_GROUP(1, 0, BW_20),
-- MCS_GROUP(2, 0, BW_20),
-- MCS_GROUP(3, 0, BW_20),
--
-- MCS_GROUP(1, 1, BW_20),
-- MCS_GROUP(2, 1, BW_20),
-- MCS_GROUP(3, 1, BW_20),
--
-- MCS_GROUP(1, 0, BW_40),
-- MCS_GROUP(2, 0, BW_40),
-- MCS_GROUP(3, 0, BW_40),
--
-- MCS_GROUP(1, 1, BW_40),
-- MCS_GROUP(2, 1, BW_40),
-- MCS_GROUP(3, 1, BW_40),
--
-- CCK_GROUP,
--
-- VHT_GROUP(1, 0, BW_20),
-- VHT_GROUP(2, 0, BW_20),
-- VHT_GROUP(3, 0, BW_20),
--
-- VHT_GROUP(1, 1, BW_20),
-- VHT_GROUP(2, 1, BW_20),
-- VHT_GROUP(3, 1, BW_20),
--
-- VHT_GROUP(1, 0, BW_40),
-- VHT_GROUP(2, 0, BW_40),
-- VHT_GROUP(3, 0, BW_40),
--
-- VHT_GROUP(1, 1, BW_40),
-- VHT_GROUP(2, 1, BW_40),
-- VHT_GROUP(3, 1, BW_40),
--
-- VHT_GROUP(1, 0, BW_80),
-- VHT_GROUP(2, 0, BW_80),
-- VHT_GROUP(3, 0, BW_80),
--
-- VHT_GROUP(1, 1, BW_80),
-- VHT_GROUP(2, 1, BW_80),
-- VHT_GROUP(3, 1, BW_80),
-+ MCS_GROUP(1, 0, BW_20, 5),
-+ MCS_GROUP(2, 0, BW_20, 4),
-+ MCS_GROUP(3, 0, BW_20, 4),
-+
-+ MCS_GROUP(1, 1, BW_20, 5),
-+ MCS_GROUP(2, 1, BW_20, 4),
-+ MCS_GROUP(3, 1, BW_20, 4),
-+
-+ MCS_GROUP(1, 0, BW_40, 4),
-+ MCS_GROUP(2, 0, BW_40, 4),
-+ MCS_GROUP(3, 0, BW_40, 4),
-+
-+ MCS_GROUP(1, 1, BW_40, 4),
-+ MCS_GROUP(2, 1, BW_40, 4),
-+ MCS_GROUP(3, 1, BW_40, 4),
-+
-+ CCK_GROUP(8),
-+
-+ VHT_GROUP(1, 0, BW_20, 5),
-+ VHT_GROUP(2, 0, BW_20, 4),
-+ VHT_GROUP(3, 0, BW_20, 4),
-+
-+ VHT_GROUP(1, 1, BW_20, 5),
-+ VHT_GROUP(2, 1, BW_20, 4),
-+ VHT_GROUP(3, 1, BW_20, 4),
-+
-+ VHT_GROUP(1, 0, BW_40, 4),
-+ VHT_GROUP(2, 0, BW_40, 4),
-+ VHT_GROUP(3, 0, BW_40, 4),
-+
-+ VHT_GROUP(1, 1, BW_40, 4),
-+ VHT_GROUP(2, 1, BW_40, 4),
-+ VHT_GROUP(3, 1, BW_40, 4),
-+
-+ VHT_GROUP(1, 0, BW_80, 4),
-+ VHT_GROUP(2, 0, BW_80, 4),
-+ VHT_GROUP(3, 0, BW_80, 4),
-+
-+ VHT_GROUP(1, 1, BW_80, 4),
-+ VHT_GROUP(2, 1, BW_80, 4),
-+ VHT_GROUP(3, 1, BW_80, 4),
- };
-
- static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES] __read_mostly;
-@@ -307,7 +310,8 @@ minstrel_ht_get_tp_avg(struct minstrel_h
- if (group != MINSTREL_CCK_GROUP)
- nsecs = 1000 * mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len);
-
-- nsecs += minstrel_mcs_groups[group].duration[rate];
-+ nsecs += minstrel_mcs_groups[group].duration[rate] <<
-+ minstrel_mcs_groups[group].shift;
-
- /*
- * For the throughput calculation, limit the probability value to 90% to
-@@ -755,12 +759,19 @@ minstrel_ht_tx_status(void *priv, struct
- minstrel_ht_update_rates(mp, mi);
- }
-
-+static inline int
-+minstrel_get_duration(int index)
-+{
-+ const struct mcs_group *group = &minstrel_mcs_groups[index / MCS_GROUP_RATES];
-+ unsigned int duration = group->duration[index % MCS_GROUP_RATES];
-+ return duration << group->shift;
-+}
-+
- static void
- minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
- int index)
- {
- struct minstrel_rate_stats *mrs;
-- const struct mcs_group *group;
- unsigned int tx_time, tx_time_rtscts, tx_time_data;
- unsigned int cw = mp->cw_min;
- unsigned int ctime = 0;
-@@ -779,8 +790,7 @@ minstrel_calc_retransmit(struct minstrel
- mrs->retry_count_rtscts = 2;
- mrs->retry_updated = true;
-
-- group = &minstrel_mcs_groups[index / MCS_GROUP_RATES];
-- tx_time_data = group->duration[index % MCS_GROUP_RATES] * ampdu_len / 1000;
-+ tx_time_data = minstrel_get_duration(index) * ampdu_len / 1000;
-
- /* Contention time for first 2 tries */
- ctime = (t_slot * cw) >> 1;
-@@ -874,20 +884,24 @@ minstrel_ht_get_max_amsdu_len(struct min
- int group = mi->max_prob_rate / MCS_GROUP_RATES;
- const struct mcs_group *g = &minstrel_mcs_groups[group];
- int rate = mi->max_prob_rate % MCS_GROUP_RATES;
-+ unsigned int duration;
-
- /* Disable A-MSDU if max_prob_rate is bad */
- if (mi->groups[group].rates[rate].prob_ewma < MINSTREL_FRAC(50, 100))
- return 1;
-
-+ duration = g->duration[rate];
-+ duration <<= g->shift;
-+
- /* If the rate is slower than single-stream MCS1, make A-MSDU limit small */
-- if (g->duration[rate] > MCS_DURATION(1, 0, 52))
-+ if (duration > MCS_DURATION(1, 0, 52))
- return 500;
-
- /*
- * If the rate is slower than single-stream MCS4, limit A-MSDU to usual
- * data packet size
- */
-- if (g->duration[rate] > MCS_DURATION(1, 0, 104))
-+ if (duration > MCS_DURATION(1, 0, 104))
- return 1600;
-
- /*
-@@ -895,7 +909,7 @@ minstrel_ht_get_max_amsdu_len(struct min
- * rate success probability is less than 75%, limit A-MSDU to twice the usual
- * data packet size
- */
-- if (g->duration[rate] > MCS_DURATION(1, 0, 260) ||
-+ if (duration > MCS_DURATION(1, 0, 260) ||
- (minstrel_ht_get_prob_ewma(mi, mi->max_tp_rate[0]) <
- MINSTREL_FRAC(75, 100)))
- return 3200;
-@@ -942,13 +956,6 @@ minstrel_ht_update_rates(struct minstrel
- rate_control_set_rates(mp->hw, mi->sta, rates);
- }
-
--static inline int
--minstrel_get_duration(int index)
--{
-- const struct mcs_group *group = &minstrel_mcs_groups[index / MCS_GROUP_RATES];
-- return group->duration[index % MCS_GROUP_RATES];
--}
--
- static int
- minstrel_get_sample_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
- {
---- a/net/mac80211/rc80211_minstrel_ht.h
-+++ b/net/mac80211/rc80211_minstrel_ht.h
-@@ -33,9 +33,10 @@
- #define MCS_GROUP_RATES 10
-
- struct mcs_group {
-- u32 flags;
-- unsigned int streams;
-- unsigned int duration[MCS_GROUP_RATES];
-+ u16 flags;
-+ u8 streams;
-+ u8 shift;
-+ u16 duration[MCS_GROUP_RATES];
- };
-
- extern const struct mcs_group minstrel_mcs_groups[];
---- a/net/mac80211/rc80211_minstrel_ht_debugfs.c
-+++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c
-@@ -58,6 +58,7 @@ minstrel_ht_stats_dump(struct minstrel_h
- static const int bitrates[4] = { 10, 20, 55, 110 };
- int idx = i * MCS_GROUP_RATES + j;
- unsigned int prob_ewmsd;
-+ unsigned int duration;
-
- if (!(mi->supported[i] & BIT(j)))
- continue;
-@@ -95,7 +96,9 @@ minstrel_ht_stats_dump(struct minstrel_h
- p += sprintf(p, " %3u ", idx);
-
- /* tx_time[rate(i)] in usec */
-- tx_time = DIV_ROUND_CLOSEST(mg->duration[j], 1000);
-+ duration = mg->duration[j];
-+ duration <<= mg->shift;
-+ tx_time = DIV_ROUND_CLOSEST(duration, 1000);
- p += sprintf(p, "%6u ", tx_time);
-
- tp_max = minstrel_ht_get_tp_avg(mi, i, j, MINSTREL_FRAC(100, 100));
-@@ -204,6 +207,7 @@ minstrel_ht_stats_csv_dump(struct minstr
- static const int bitrates[4] = { 10, 20, 55, 110 };
- int idx = i * MCS_GROUP_RATES + j;
- unsigned int prob_ewmsd;
-+ unsigned int duration;
-
- if (!(mi->supported[i] & BIT(j)))
- continue;
-@@ -238,7 +242,10 @@ minstrel_ht_stats_csv_dump(struct minstr
- }
-
- p += sprintf(p, "%u,", idx);
-- tx_time = DIV_ROUND_CLOSEST(mg->duration[j], 1000);
-+
-+ duration = mg->duration[j];
-+ duration <<= mg->shift;
-+ tx_time = DIV_ROUND_CLOSEST(duration, 1000);
- p += sprintf(p, "%u,", tx_time);
-
- tp_max = minstrel_ht_get_tp_avg(mi, i, j, MINSTREL_FRAC(100, 100));
diff --git a/package/kernel/mac80211/patches/subsys/307-mac80211-minstrel-fix-using-short-preamble-CCK-rates.patch b/package/kernel/mac80211/patches/subsys/307-mac80211-minstrel-fix-using-short-preamble-CCK-rates.patch
deleted file mode 100644
index 502d8c7768..0000000000
--- a/package/kernel/mac80211/patches/subsys/307-mac80211-minstrel-fix-using-short-preamble-CCK-rates.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 10 Feb 2018 13:43:07 +0100
-Subject: [PATCH] mac80211: minstrel: fix using short preamble CCK rates on
- HT clients
-
-mi->supported[MINSTREL_CCK_GROUP] needs to be updated
-
-Fixes: 782dda00ab8e ("mac80211: minstrel_ht: move short preamble check out of get_rate")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -1135,7 +1135,6 @@ minstrel_ht_update_caps(void *priv, stru
- struct ieee80211_mcs_info *mcs = &sta->ht_cap.mcs;
- u16 ht_cap = sta->ht_cap.cap;
- struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
-- struct sta_info *sinfo = container_of(sta, struct sta_info, sta);
- int use_vht;
- int n_supported = 0;
- int ack_dur;
-@@ -1267,8 +1266,7 @@ minstrel_ht_update_caps(void *priv, stru
- if (!n_supported)
- goto use_legacy;
-
-- if (test_sta_flag(sinfo, WLAN_STA_SHORT_PREAMBLE))
-- mi->cck_supported_short |= mi->cck_supported_short << 4;
-+ mi->supported[MINSTREL_CCK_GROUP] |= mi->cck_supported_short << 4;
-
- /* create an initial rate table with the lowest supported rates */
- minstrel_ht_update_stats(mp, mi);
diff --git a/package/kernel/mac80211/patches/subsys/308-mac80211-minstrel-fix-CCK-rate-group-streams-value.patch b/package/kernel/mac80211/patches/subsys/308-mac80211-minstrel-fix-CCK-rate-group-streams-value.patch
deleted file mode 100644
index f0ffcd9655..0000000000
--- a/package/kernel/mac80211/patches/subsys/308-mac80211-minstrel-fix-CCK-rate-group-streams-value.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 1 Mar 2018 13:27:54 +0100
-Subject: [PATCH] mac80211: minstrel: fix CCK rate group streams value
-
-Fixes a harmless underflow issue when CCK rates are actively being used
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -131,7 +131,7 @@
-
- #define CCK_GROUP(_s) \
- [MINSTREL_CCK_GROUP] = { \
-- .streams = 0, \
-+ .streams = 1, \
- .flags = 0, \
- .shift = _s, \
- .duration = { \
diff --git a/package/kernel/mac80211/patches/subsys/309-mac80211-minstrel-fix-sampling-reporting-of-CCK-rate.patch b/package/kernel/mac80211/patches/subsys/309-mac80211-minstrel-fix-sampling-reporting-of-CCK-rate.patch
deleted file mode 100644
index e0049c36eb..0000000000
--- a/package/kernel/mac80211/patches/subsys/309-mac80211-minstrel-fix-sampling-reporting-of-CCK-rate.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 1 Mar 2018 13:28:48 +0100
-Subject: [PATCH] mac80211: minstrel: fix sampling/reporting of CCK rates
- in HT mode
-
-Long/short preamble selection cannot be sampled separately, since it
-depends on the BSS state. Because of that, sampling attempts to
-currently not used preamble modes are not counted in the statistics,
-which leads to CCK rates being sampled too often.
-
-Fix statistics accounting for long/short preamble by increasing the
-index where necessary.
-Fix excessive CCK rate sampling by dropping unsupported sample attempts.
-
-This improves throughput on 2.4 GHz channels
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -281,7 +281,8 @@ minstrel_ht_get_stats(struct minstrel_pr
- break;
-
- /* short preamble */
-- if (!(mi->supported[group] & BIT(idx)))
-+ if ((mi->supported[group] & BIT(idx + 4)) &&
-+ (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE))
- idx += 4;
- }
- return &mi->groups[group].rates[idx];
-@@ -1080,18 +1081,23 @@ minstrel_ht_get_rate(void *priv, struct
- return;
-
- sample_group = &minstrel_mcs_groups[sample_idx / MCS_GROUP_RATES];
-+ sample_idx %= MCS_GROUP_RATES;
-+
-+ if (sample_group == &minstrel_mcs_groups[MINSTREL_CCK_GROUP] &&
-+ (sample_idx >= 4) != txrc->short_preamble)
-+ return;
-+
- info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
- rate->count = 1;
-
-- if (sample_idx / MCS_GROUP_RATES == MINSTREL_CCK_GROUP) {
-+ if (sample_group == &minstrel_mcs_groups[MINSTREL_CCK_GROUP]) {
- int idx = sample_idx % ARRAY_SIZE(mp->cck_rates);
- rate->idx = mp->cck_rates[idx];
- } else if (sample_group->flags & IEEE80211_TX_RC_VHT_MCS) {
- ieee80211_rate_set_vht(rate, sample_idx % MCS_GROUP_RATES,
- sample_group->streams);
- } else {
-- rate->idx = sample_idx % MCS_GROUP_RATES +
-- (sample_group->streams - 1) * 8;
-+ rate->idx = sample_idx + (sample_group->streams - 1) * 8;
- }
-
- rate->flags = sample_group->flags;
diff --git a/package/kernel/mac80211/patches/subsys/310-mac80211-minstrel-do-not-sample-rates-3-times-slower.patch b/package/kernel/mac80211/patches/subsys/310-mac80211-minstrel-do-not-sample-rates-3-times-slower.patch
deleted file mode 100644
index 414cb137de..0000000000
--- a/package/kernel/mac80211/patches/subsys/310-mac80211-minstrel-do-not-sample-rates-3-times-slower.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 3 Mar 2018 18:48:58 +0100
-Subject: [PATCH] mac80211: minstrel: do not sample rates 3 times slower than
- max_prob_rate
-
-These rates are highly unlikely to be used quickly, even if the link
-deteriorates rapidly. This improves throughput in cases where CCK rates
-are not reliable enough to be skipped entirely during sampling.
-Sampling these rates regularly can cost a lot of airtime.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -1004,10 +1004,13 @@ minstrel_get_sample_rate(struct minstrel
- return -1;
-
- /*
-- * Do not sample if the probability is already higher than 95%
-- * to avoid wasting airtime.
-+ * Do not sample if the probability is already higher than 95%,
-+ * or if the rate is 3 times slower than the current max probability
-+ * rate, to avoid wasting airtime.
- */
-- if (mrs->prob_ewma > MINSTREL_FRAC(95, 100))
-+ sample_dur = minstrel_get_duration(sample_idx);
-+ if (mrs->prob_ewma > MINSTREL_FRAC(95, 100) ||
-+ minstrel_get_duration(mi->max_prob_rate) * 3 < sample_dur)
- return -1;
-
- /*
-@@ -1017,7 +1020,6 @@ minstrel_get_sample_rate(struct minstrel
-
- cur_max_tp_streams = minstrel_mcs_groups[tp_rate1 /
- MCS_GROUP_RATES].streams;
-- sample_dur = minstrel_get_duration(sample_idx);
- if (sample_dur >= minstrel_get_duration(tp_rate2) &&
- (cur_max_tp_streams - 1 <
- minstrel_mcs_groups[sample_group].streams ||
diff --git a/package/kernel/mac80211/patches/subsys/311-mac80211-fix-memory-accounting-with-A-MSDU-aggregati.patch b/package/kernel/mac80211/patches/subsys/311-mac80211-fix-memory-accounting-with-A-MSDU-aggregati.patch
deleted file mode 100644
index 1fd2b25271..0000000000
--- a/package/kernel/mac80211/patches/subsys/311-mac80211-fix-memory-accounting-with-A-MSDU-aggregati.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 8 Mar 2018 21:00:56 +0100
-Subject: [PATCH] mac80211: fix memory accounting with A-MSDU aggregation
-
-fq uses skb->truesize for memory usage tracking. Increments/decrements
-are done on enqueue/dequeue.
-When A-MSDU aggregation is performed on tx side, the packet is
-aggregated with the last packet in the queue belonging to the same flow.
-There are multiple bugs here:
-- The truesize field of the aggregated packet isn't updated, so memory
-usage is underestimated
-- fq->memory_usage isn't adjusted.
-
-Because of the combination of both bugs, this only causes tx issues in
-rare cases, mainly when the A-MSDU head needs to be reallocated.
-
-Fix this by adjusting both truesize of the A-MSDU head and adding the
-truesize delta to fq->memory_usage.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -3185,6 +3185,7 @@ static bool ieee80211_amsdu_aggregate(st
- u8 max_subframes = sta->sta.max_amsdu_subframes;
- int max_frags = local->hw.max_tx_fragments;
- int max_amsdu_len = sta->sta.max_amsdu_len;
-+ int orig_truesize;
- __be16 len;
- void *data;
- bool ret = false;
-@@ -3216,12 +3217,13 @@ static bool ieee80211_amsdu_aggregate(st
- flow = fq_flow_classify(fq, tin, skb, fq_flow_get_default_func);
- head = skb_peek_tail(&flow->queue);
- if (!head)
-- goto out;
-+ goto unlock;
-
-+ orig_truesize = head->truesize;
- orig_len = head->len;
-
- if (skb->len + head->len > max_amsdu_len)
-- goto out;
-+ goto unlock;
-
- nfrags = 1 + skb_shinfo(skb)->nr_frags;
- nfrags += 1 + skb_shinfo(head)->nr_frags;
-@@ -3279,6 +3281,9 @@ out_recalc:
- fq_recalc_backlog(fq, tin, flow);
- }
- out:
-+ fq->memory_usage += head->truesize - orig_truesize;
-+
-+unlock:
- spin_unlock_bh(&fq->lock);
-
- return ret;
diff --git a/package/kernel/mac80211/patches/subsys/312-mac80211-minstrel_ht-add-flag-to-indicate-missing-in.patch b/package/kernel/mac80211/patches/subsys/312-mac80211-minstrel_ht-add-flag-to-indicate-missing-in.patch
deleted file mode 100644
index f221d36bf8..0000000000
--- a/package/kernel/mac80211/patches/subsys/312-mac80211-minstrel_ht-add-flag-to-indicate-missing-in.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 16 Jan 2019 22:32:12 +0100
-Subject: [PATCH] mac80211: minstrel_ht: add flag to indicate
- missing/inaccurate tx A-MPDU length
-
-Some hardware (e.g. MediaTek MT7603) cannot report A-MPDU length in tx status
-information. Add support for a flag to indicate that, to allow minstrel_ht
-to use a fixed value in its internal calculation (which gives better results
-than just defaulting to 1).
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -2131,6 +2131,9 @@ struct ieee80211_txq {
- * @IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP: The driver (or firmware) doesn't
- * support QoS NDP for AP probing - that's most likely a driver bug.
- *
-+ * @IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN: Driver does not report accurate A-MPDU
-+ * length in tx status information
-+ *
- * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
- */
- enum ieee80211_hw_flags {
-@@ -2176,6 +2179,7 @@ enum ieee80211_hw_flags {
- IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA,
- IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP,
- IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP,
-+ IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN,
-
- /* keep last, obviously */
- NUM_IEEE80211_HW_FLAGS
---- a/net/mac80211/debugfs.c
-+++ b/net/mac80211/debugfs.c
-@@ -214,6 +214,7 @@ static const char *hw_flag_names[] = {
- FLAG(SUPPORTS_TDLS_BUFFER_STA),
- FLAG(DEAUTH_NEED_MGD_TX_PREP),
- FLAG(DOESNT_SUPPORT_QOS_NDP),
-+ FLAG(TX_STATUS_NO_AMPDU_LEN),
- #undef FLAG
- };
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -294,6 +294,15 @@ minstrel_get_ratestats(struct minstrel_h
- return &mi->groups[index / MCS_GROUP_RATES].rates[index % MCS_GROUP_RATES];
- }
-
-+static unsigned int
-+minstrel_ht_avg_ampdu_len(struct minstrel_ht_sta *mi)
-+{
-+ if (!mi->avg_ampdu_len)
-+ return AVG_AMPDU_SIZE;
-+
-+ return MINSTREL_TRUNC(mi->avg_ampdu_len);
-+}
-+
- /*
- * Return current throughput based on the average A-MPDU length, taking into
- * account the expected number of retransmissions and their expected length
-@@ -309,7 +318,7 @@ minstrel_ht_get_tp_avg(struct minstrel_h
- return 0;
-
- if (group != MINSTREL_CCK_GROUP)
-- nsecs = 1000 * mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len);
-+ nsecs = 1000 * mi->overhead / minstrel_ht_avg_ampdu_len(mi);
-
- nsecs += minstrel_mcs_groups[group].duration[rate] <<
- minstrel_mcs_groups[group].shift;
-@@ -503,8 +512,12 @@ minstrel_ht_update_stats(struct minstrel
- u16 tmp_cck_tp_rate[MAX_THR_RATES], index;
-
- if (mi->ampdu_packets > 0) {
-- mi->avg_ampdu_len = minstrel_ewma(mi->avg_ampdu_len,
-- MINSTREL_FRAC(mi->ampdu_len, mi->ampdu_packets), EWMA_LEVEL);
-+ if (!ieee80211_hw_check(mp->hw, TX_STATUS_NO_AMPDU_LEN))
-+ mi->avg_ampdu_len = minstrel_ewma(mi->avg_ampdu_len,
-+ MINSTREL_FRAC(mi->ampdu_len, mi->ampdu_packets),
-+ EWMA_LEVEL);
-+ else
-+ mi->avg_ampdu_len = 0;
- mi->ampdu_len = 0;
- mi->ampdu_packets = 0;
- }
-@@ -709,7 +722,9 @@ minstrel_ht_tx_status(void *priv, struct
- mi->ampdu_len += info->status.ampdu_len;
-
- if (!mi->sample_wait && !mi->sample_tries && mi->sample_count > 0) {
-- mi->sample_wait = 16 + 2 * MINSTREL_TRUNC(mi->avg_ampdu_len);
-+ int avg_ampdu_len = minstrel_ht_avg_ampdu_len(mi);
-+
-+ mi->sample_wait = 16 + 2 * avg_ampdu_len;
- mi->sample_tries = 1;
- mi->sample_count--;
- }
-@@ -777,7 +792,7 @@ minstrel_calc_retransmit(struct minstrel
- unsigned int cw = mp->cw_min;
- unsigned int ctime = 0;
- unsigned int t_slot = 9; /* FIXME */
-- unsigned int ampdu_len = MINSTREL_TRUNC(mi->avg_ampdu_len);
-+ unsigned int ampdu_len = minstrel_ht_avg_ampdu_len(mi);
- unsigned int overhead = 0, overhead_rtscts = 0;
-
- mrs = minstrel_get_ratestats(mi, index);
---- a/net/mac80211/rc80211_minstrel_ht_debugfs.c
-+++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c
-@@ -163,9 +163,10 @@ minstrel_ht_stats_open(struct inode *ino
- "lookaround %d\n",
- max(0, (int) mi->total_packets - (int) mi->sample_packets),
- mi->sample_packets);
-- p += sprintf(p, "Average # of aggregated frames per A-MPDU: %d.%d\n",
-- MINSTREL_TRUNC(mi->avg_ampdu_len),
-- MINSTREL_TRUNC(mi->avg_ampdu_len * 10) % 10);
-+ if (mi->avg_ampdu_len)
-+ p += sprintf(p, "Average # of aggregated frames per A-MPDU: %d.%d\n",
-+ MINSTREL_TRUNC(mi->avg_ampdu_len),
-+ MINSTREL_TRUNC(mi->avg_ampdu_len * 10) % 10);
- ms->len = p - ms->buf;
- WARN_ON(ms->len + sizeof(*ms) > 32768);
-
diff --git a/package/kernel/mac80211/patches/subsys/313-mac80211-fix-unaligned-access-in-mesh-table-hash-fun.patch b/package/kernel/mac80211/patches/subsys/313-mac80211-fix-unaligned-access-in-mesh-table-hash-fun.patch
deleted file mode 100644
index 2ce23586ca..0000000000
--- a/package/kernel/mac80211/patches/subsys/313-mac80211-fix-unaligned-access-in-mesh-table-hash-fun.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 13 Mar 2019 18:52:56 +0100
-Subject: [PATCH] mac80211: fix unaligned access in mesh table hash function
-
-The pointer to the last four bytes of the address is not guaranteed to be
-aligned, so we need to use __get_unaligned_cpu32 here
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/mesh_pathtbl.c
-+++ b/net/mac80211/mesh_pathtbl.c
-@@ -23,7 +23,7 @@ static void mesh_path_free_rcu(struct me
- static u32 mesh_table_hash(const void *addr, u32 len, u32 seed)
- {
- /* Use last four bytes of hw addr as hash index */
-- return jhash_1word(*(u32 *)(addr+2), seed);
-+ return jhash_1word(__get_unaligned_cpu32(addr+2), seed);
- }
-
- static const struct rhashtable_params mesh_rht_params = {
diff --git a/package/kernel/mac80211/patches/subsys/320-mac80211-Add-TXQ-scheduling-API.patch b/package/kernel/mac80211/patches/subsys/320-mac80211-Add-TXQ-scheduling-API.patch
deleted file mode 100644
index 0f7d9e1506..0000000000
--- a/package/kernel/mac80211/patches/subsys/320-mac80211-Add-TXQ-scheduling-API.patch
+++ /dev/null
@@ -1,292 +0,0 @@
-From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@toke.dk>
-Date: Tue, 18 Dec 2018 17:02:06 -0800
-Subject: [PATCH] mac80211: Add TXQ scheduling API
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds an API to mac80211 to handle scheduling of TXQs. The interface
-between driver and mac80211 for TXQ handling is changed by adding two new
-functions: ieee80211_next_txq(), which will return the next TXQ to schedule
-in the current round-robin rotation, and ieee80211_return_txq(), which the
-driver uses to indicate that it has finished scheduling a TXQ (which will
-then be put back in the scheduling rotation if it isn't empty).
-
-The driver must call ieee80211_txq_schedule_start() at the start of each
-scheduling session, and ieee80211_txq_schedule_end() at the end. The API
-then guarantees that the same TXQ is not returned twice in the same
-session (so a driver can loop on ieee80211_next_txq() without worrying
-about breaking the loop.
-
-Usage of the new API is optional, so drivers can be ported one at a time.
-In this patch, the actual scheduling performed by mac80211 is simple
-round-robin, but a subsequent commit adds airtime fairness awareness to the
-scheduler.
-
-Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
-[minor kernel-doc fix, propagate sparse locking checks out]
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -107,9 +107,15 @@
- * The driver is expected to initialize its private per-queue data for stations
- * and interfaces in the .add_interface and .sta_add ops.
- *
-- * The driver can't access the queue directly. To dequeue a frame, it calls
-- * ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a queue, it
-- * calls the .wake_tx_queue driver op.
-+ * The driver can't access the queue directly. To dequeue a frame from a
-+ * txq, it calls ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a
-+ * queue, it calls the .wake_tx_queue driver op.
-+ *
-+ * Drivers can optionally delegate responsibility for scheduling queues to
-+ * mac80211, to take advantage of airtime fairness accounting. In this case, to
-+ * obtain the next queue to pull frames from, the driver calls
-+ * ieee80211_next_txq(). The driver is then expected to return the txq using
-+ * ieee80211_return_txq().
- *
- * For AP powersave TIM handling, the driver only needs to indicate if it has
- * buffered packets in the driver specific data structures by calling
-@@ -5979,7 +5985,8 @@ void ieee80211_unreserve_tid(struct ieee
- * ieee80211_tx_dequeue - dequeue a packet from a software tx queue
- *
- * @hw: pointer as obtained from ieee80211_alloc_hw()
-- * @txq: pointer obtained from station or virtual interface
-+ * @txq: pointer obtained from station or virtual interface, or from
-+ * ieee80211_next_txq()
- *
- * Returns the skb if successful, %NULL if no frame was available.
- */
-@@ -5987,6 +5994,54 @@ struct sk_buff *ieee80211_tx_dequeue(str
- struct ieee80211_txq *txq);
-
- /**
-+ * ieee80211_next_txq - get next tx queue to pull packets from
-+ *
-+ * @hw: pointer as obtained from ieee80211_alloc_hw()
-+ * @ac: AC number to return packets from.
-+ *
-+ * Should only be called between calls to ieee80211_txq_schedule_start()
-+ * and ieee80211_txq_schedule_end().
-+ * Returns the next txq if successful, %NULL if no queue is eligible. If a txq
-+ * is returned, it should be returned with ieee80211_return_txq() after the
-+ * driver has finished scheduling it.
-+ */
-+struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac);
-+
-+/**
-+ * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq()
-+ *
-+ * @hw: pointer as obtained from ieee80211_alloc_hw()
-+ * @txq: pointer obtained from station or virtual interface
-+ *
-+ * Should only be called between calls to ieee80211_txq_schedule_start()
-+ * and ieee80211_txq_schedule_end().
-+ */
-+void ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq);
-+
-+/**
-+ * ieee80211_txq_schedule_start - acquire locks for safe scheduling of an AC
-+ *
-+ * @hw: pointer as obtained from ieee80211_alloc_hw()
-+ * @ac: AC number to acquire locks for
-+ *
-+ * Acquire locks needed to schedule TXQs from the given AC. Should be called
-+ * before ieee80211_next_txq() or ieee80211_return_txq().
-+ */
-+void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac)
-+ __acquires(txq_lock);
-+
-+/**
-+ * ieee80211_txq_schedule_end - release locks for safe scheduling of an AC
-+ *
-+ * @hw: pointer as obtained from ieee80211_alloc_hw()
-+ * @ac: AC number to acquire locks for
-+ *
-+ * Release locks previously acquired by ieee80211_txq_schedule_end().
-+ */
-+void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac)
-+ __releases(txq_lock);
-+
-+/**
- * ieee80211_txq_get_depth - get pending frame/byte count of given txq
- *
- * The values are not guaranteed to be coherent with regard to each other, i.e.
---- a/net/mac80211/agg-tx.c
-+++ b/net/mac80211/agg-tx.c
-@@ -229,7 +229,7 @@ ieee80211_agg_start_txq(struct sta_info
- clear_bit(IEEE80211_TXQ_STOP, &txqi->flags);
- local_bh_disable();
- rcu_read_lock();
-- drv_wake_tx_queue(sta->sdata->local, txqi);
-+ schedule_and_wake_txq(sta->sdata->local, txqi);
- rcu_read_unlock();
- local_bh_enable();
- }
---- a/net/mac80211/driver-ops.h
-+++ b/net/mac80211/driver-ops.h
-@@ -1176,6 +1176,15 @@ static inline void drv_wake_tx_queue(str
- local->ops->wake_tx_queue(&local->hw, &txq->txq);
- }
-
-+static inline void schedule_and_wake_txq(struct ieee80211_local *local,
-+ struct txq_info *txqi)
-+{
-+ spin_lock_bh(&local->active_txq_lock[txqi->txq.ac]);
-+ ieee80211_return_txq(&local->hw, &txqi->txq);
-+ spin_unlock_bh(&local->active_txq_lock[txqi->txq.ac]);
-+ drv_wake_tx_queue(local, txqi);
-+}
-+
- static inline int drv_start_nan(struct ieee80211_local *local,
- struct ieee80211_sub_if_data *sdata,
- struct cfg80211_nan_conf *conf)
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -829,6 +829,8 @@ enum txq_info_flags {
- * a fq_flow which is already owned by a different tin
- * @def_cvars: codel vars for @def_flow
- * @frags: used to keep fragments created after dequeue
-+ * @schedule_order: used with ieee80211_local->active_txqs
-+ * @schedule_round: counter to prevent infinite loops on TXQ scheduling
- */
- struct txq_info {
- struct fq_tin tin;
-@@ -836,6 +838,8 @@ struct txq_info {
- struct codel_vars def_cvars;
- struct codel_stats cstats;
- struct sk_buff_head frags;
-+ struct list_head schedule_order;
-+ u16 schedule_round;
- unsigned long flags;
-
- /* keep last! */
-@@ -1127,6 +1131,11 @@ struct ieee80211_local {
- struct codel_vars *cvars;
- struct codel_params cparams;
-
-+ /* protects active_txqs and txqi->schedule_order */
-+ spinlock_t active_txq_lock[IEEE80211_NUM_ACS];
-+ struct list_head active_txqs[IEEE80211_NUM_ACS];
-+ u16 schedule_round[IEEE80211_NUM_ACS];
-+
- const struct ieee80211_ops *ops;
-
- /*
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -652,6 +652,11 @@ struct ieee80211_hw *ieee80211_alloc_hw_
- spin_lock_init(&local->rx_path_lock);
- spin_lock_init(&local->queue_stop_reason_lock);
-
-+ for (i = 0; i < IEEE80211_NUM_ACS; i++) {
-+ INIT_LIST_HEAD(&local->active_txqs[i]);
-+ spin_lock_init(&local->active_txq_lock[i]);
-+ }
-+
- INIT_LIST_HEAD(&local->chanctx_list);
- mutex_init(&local->chanctx_mtx);
-
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -1244,7 +1244,7 @@ void ieee80211_sta_ps_deliver_wakeup(str
- if (!txq_has_queue(sta->sta.txq[i]))
- continue;
-
-- drv_wake_tx_queue(local, to_txq_info(sta->sta.txq[i]));
-+ schedule_and_wake_txq(local, to_txq_info(sta->sta.txq[i]));
- }
- }
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1441,6 +1441,7 @@ void ieee80211_txq_init(struct ieee80211
- codel_vars_init(&txqi->def_cvars);
- codel_stats_init(&txqi->cstats);
- __skb_queue_head_init(&txqi->frags);
-+ INIT_LIST_HEAD(&txqi->schedule_order);
-
- txqi->txq.vif = &sdata->vif;
-
-@@ -1464,6 +1465,9 @@ void ieee80211_txq_purge(struct ieee8021
-
- fq_tin_reset(fq, tin, fq_skb_free_func);
- ieee80211_purge_tx_queue(&local->hw, &txqi->frags);
-+ spin_lock_bh(&local->active_txq_lock[txqi->txq.ac]);
-+ list_del_init(&txqi->schedule_order);
-+ spin_unlock_bh(&local->active_txq_lock[txqi->txq.ac]);
- }
-
- void ieee80211_txq_set_params(struct ieee80211_local *local)
-@@ -1580,7 +1584,7 @@ static bool ieee80211_queue_skb(struct i
- ieee80211_txq_enqueue(local, txqi, skb);
- spin_unlock_bh(&fq->lock);
-
-- drv_wake_tx_queue(local, txqi);
-+ schedule_and_wake_txq(local, txqi);
-
- return true;
- }
-@@ -3602,6 +3606,60 @@ out:
- }
- EXPORT_SYMBOL(ieee80211_tx_dequeue);
-
-+struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac)
-+{
-+ struct ieee80211_local *local = hw_to_local(hw);
-+ struct txq_info *txqi = NULL;
-+
-+ lockdep_assert_held(&local->active_txq_lock[ac]);
-+
-+ txqi = list_first_entry_or_null(&local->active_txqs[ac],
-+ struct txq_info,
-+ schedule_order);
-+
-+ if (!txqi || txqi->schedule_round == local->schedule_round[ac])
-+ return NULL;
-+
-+ list_del_init(&txqi->schedule_order);
-+ txqi->schedule_round = local->schedule_round[ac];
-+ return &txqi->txq;
-+}
-+EXPORT_SYMBOL(ieee80211_next_txq);
-+
-+void ieee80211_return_txq(struct ieee80211_hw *hw,
-+ struct ieee80211_txq *txq)
-+{
-+ struct ieee80211_local *local = hw_to_local(hw);
-+ struct txq_info *txqi = to_txq_info(txq);
-+
-+ lockdep_assert_held(&local->active_txq_lock[txq->ac]);
-+
-+ if (list_empty(&txqi->schedule_order) &&
-+ (!skb_queue_empty(&txqi->frags) || txqi->tin.backlog_packets))
-+ list_add_tail(&txqi->schedule_order,
-+ &local->active_txqs[txq->ac]);
-+}
-+EXPORT_SYMBOL(ieee80211_return_txq);
-+
-+void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac)
-+ __acquires(txq_lock)
-+{
-+ struct ieee80211_local *local = hw_to_local(hw);
-+
-+ spin_lock_bh(&local->active_txq_lock[ac]);
-+ local->schedule_round[ac]++;
-+}
-+EXPORT_SYMBOL(ieee80211_txq_schedule_start);
-+
-+void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac)
-+ __releases(txq_lock)
-+{
-+ struct ieee80211_local *local = hw_to_local(hw);
-+
-+ spin_unlock_bh(&local->active_txq_lock[ac]);
-+}
-+EXPORT_SYMBOL(ieee80211_txq_schedule_end);
-+
- void __ieee80211_subif_start_xmit(struct sk_buff *skb,
- struct net_device *dev,
- u32 info_flags)
diff --git a/package/kernel/mac80211/patches/subsys/321-cfg80211-Add-airtime-statistics-and-settings.patch b/package/kernel/mac80211/patches/subsys/321-cfg80211-Add-airtime-statistics-and-settings.patch
deleted file mode 100644
index 7eb64c4251..0000000000
--- a/package/kernel/mac80211/patches/subsys/321-cfg80211-Add-airtime-statistics-and-settings.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@toke.dk>
-Date: Tue, 18 Dec 2018 17:02:07 -0800
-Subject: [PATCH] cfg80211: Add airtime statistics and settings
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds TX airtime statistics to the cfg80211 station dump (to go along
-with the RX info already present), and adds a new parameter to set the
-airtime weight of each station. The latter allows userspace to implement
-policies for different stations by varying their weights.
-
-Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
-[rmanohar@codeaurora.org: fixed checkpatch warnings]
-Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
-[move airtime weight != 0 check into policy]
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/include/net/cfg80211.h
-+++ b/include/net/cfg80211.h
-@@ -988,6 +988,7 @@ enum station_parameters_apply_mask {
- * @support_p2p_ps: information if station supports P2P PS mechanism
- * @he_capa: HE capabilities of station
- * @he_capa_len: the length of the HE capabilities
-+ * @airtime_weight: airtime scheduler weight for this station
- */
- struct station_parameters {
- const u8 *supported_rates;
-@@ -1017,6 +1018,7 @@ struct station_parameters {
- int support_p2p_ps;
- const struct ieee80211_he_cap_elem *he_capa;
- u8 he_capa_len;
-+ u16 airtime_weight;
- };
-
- /**
-@@ -1284,6 +1286,8 @@ struct cfg80211_tid_stats {
- * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received
- * from this peer
- * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer
-+ * @tx_duration: aggregate PPDU duration(usecs) for all the frames to a peer
-+ * @airtime_weight: current airtime scheduling weight
- * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last
- * (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs.
- * Note that this doesn't use the @filled bit, but is used if non-NULL.
-@@ -1330,12 +1334,15 @@ struct station_info {
-
- u32 expected_throughput;
-
-- u64 rx_beacon;
-+ u64 tx_duration;
- u64 rx_duration;
-+ u64 rx_beacon;
- u8 rx_beacon_signal_avg;
- struct cfg80211_tid_stats *pertid;
- s8 ack_signal;
- s8 avg_ack_signal;
-+
-+ u16 airtime_weight;
- };
-
- #if IS_ENABLED(CPTCFG_CFG80211)
-@@ -2361,6 +2368,8 @@ enum wiphy_params_flags {
- WIPHY_PARAM_TXQ_QUANTUM = 1 << 8,
- };
-
-+#define IEEE80211_DEFAULT_AIRTIME_WEIGHT 256
-+
- /**
- * struct cfg80211_pmksa - PMK Security Association
- *
---- a/include/uapi/linux/nl80211.h
-+++ b/include/uapi/linux/nl80211.h
-@@ -2241,6 +2241,9 @@ enum nl80211_commands {
- * association request when used with NL80211_CMD_NEW_STATION). Can be set
- * only if %NL80211_STA_FLAG_WME is set.
- *
-+ * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
-+ * scheduler.
-+ *
- * @NUM_NL80211_ATTR: total number of nl80211_attrs available
- * @NL80211_ATTR_MAX: highest attribute number currently defined
- * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2682,6 +2685,14 @@ enum nl80211_attrs {
-
- NL80211_ATTR_HE_CAPABILITY,
-
-+ /* not backported yet */
-+ NL80211_ATTR_FTM_RESPONDER,
-+ NL80211_ATTR_FTM_RESPONDER_STATS,
-+ NL80211_ATTR_TIMEOUT,
-+ NL80211_ATTR_PEER_MEASUREMENTS,
-+
-+ NL80211_ATTR_AIRTIME_WEIGHT,
-+
- /* add attributes here, update the policy in nl80211.c */
-
- __NL80211_ATTR_AFTER_LAST,
-@@ -3052,6 +3063,9 @@ enum nl80211_sta_bss_param {
- * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
- * @NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG: avg signal strength of (data)
- * ACK frame (s8, dBm)
-+ * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames
-+ * sent to the station (u64, usec)
-+ * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
- */
-@@ -3093,6 +3107,14 @@ enum nl80211_sta_info {
- NL80211_STA_INFO_ACK_SIGNAL,
- NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG,
-
-+ /* not backported yet */
-+ NL80211_STA_INFO_RX_MPDUS,
-+ NL80211_STA_INFO_FCS_ERROR_COUNT,
-+ NL80211_STA_INFO_CONNECTED_TO_GATE,
-+
-+ NL80211_STA_INFO_TX_DURATION,
-+ NL80211_STA_INFO_AIRTIME_WEIGHT,
-+
- /* keep last */
- __NL80211_STA_INFO_AFTER_LAST,
- NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
-@@ -5224,6 +5246,10 @@ enum nl80211_feature_flags {
- * except for supported rates from the probe request content if requested
- * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
- *
-+ * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
-+ * fairness for transmitted packets and has enabled airtime fairness
-+ * scheduling.
-+ *
- * @NUM_NL80211_EXT_FEATURES: number of extended features.
- * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
- */
-@@ -5260,6 +5286,12 @@ enum nl80211_ext_feature_index {
- NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
- NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
-
-+ /* --- not backported yet --- */
-+ NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
-+ NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
-+
-+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
-+
- /* add new features before the definition below */
- NUM_NL80211_EXT_FEATURES,
- MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
---- a/net/wireless/nl80211.c
-+++ b/net/wireless/nl80211.c
-@@ -430,6 +430,7 @@ static const struct nla_policy nl80211_p
- [NL80211_ATTR_TXQ_QUANTUM] = { .type = NLA_U32 },
- [NL80211_ATTR_HE_CAPABILITY] = { .type = NLA_BINARY,
- .len = NL80211_HE_MAX_CAPABILITY_LEN },
-+ [NL80211_ATTR_AIRTIME_WEIGHT] = NLA_POLICY_MIN(NLA_U16, 1),
- };
-
- /* policy for the key attributes */
-@@ -4658,6 +4659,11 @@ static int nl80211_send_station(struct s
- PUT_SINFO(PLID, plid, u16);
- PUT_SINFO(PLINK_STATE, plink_state, u8);
- PUT_SINFO_U64(RX_DURATION, rx_duration);
-+ PUT_SINFO_U64(TX_DURATION, tx_duration);
-+
-+ if (wiphy_ext_feature_isset(&rdev->wiphy,
-+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS))
-+ PUT_SINFO(AIRTIME_WEIGHT, airtime_weight, u16);
-
- switch (rdev->wiphy.signal_type) {
- case CFG80211_SIGNAL_TYPE_MBM:
-@@ -5294,6 +5300,15 @@ static int nl80211_set_station(struct sk
- nla_get_u8(info->attrs[NL80211_ATTR_OPMODE_NOTIF]);
- }
-
-+ if (info->attrs[NL80211_ATTR_AIRTIME_WEIGHT])
-+ params.airtime_weight =
-+ nla_get_u16(info->attrs[NL80211_ATTR_AIRTIME_WEIGHT]);
-+
-+ if (params.airtime_weight &&
-+ !wiphy_ext_feature_isset(&rdev->wiphy,
-+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS))
-+ return -EOPNOTSUPP;
-+
- /* Include parameters for TDLS peer (will check later) */
- err = nl80211_set_station_tdls(info, &params);
- if (err)
-@@ -5432,6 +5447,15 @@ static int nl80211_new_station(struct sk
- return -EINVAL;
- }
-
-+ if (info->attrs[NL80211_ATTR_AIRTIME_WEIGHT])
-+ params.airtime_weight =
-+ nla_get_u16(info->attrs[NL80211_ATTR_AIRTIME_WEIGHT]);
-+
-+ if (params.airtime_weight &&
-+ !wiphy_ext_feature_isset(&rdev->wiphy,
-+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS))
-+ return -EOPNOTSUPP;
-+
- err = nl80211_parse_sta_channel_info(info, &params);
- if (err)
- return err;
diff --git a/package/kernel/mac80211/patches/subsys/322-mac80211-Add-airtime-accounting-and-scheduling-to-TX.patch b/package/kernel/mac80211/patches/subsys/322-mac80211-Add-airtime-accounting-and-scheduling-to-TX.patch
deleted file mode 100644
index d4176eb491..0000000000
--- a/package/kernel/mac80211/patches/subsys/322-mac80211-Add-airtime-accounting-and-scheduling-to-TX.patch
+++ /dev/null
@@ -1,522 +0,0 @@
-From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@toke.dk>
-Date: Tue, 18 Dec 2018 17:02:08 -0800
-Subject: [PATCH] mac80211: Add airtime accounting and scheduling to TXQs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds airtime accounting and scheduling to the mac80211 TXQ
-scheduler. A new callback, ieee80211_sta_register_airtime(), is added
-that drivers can call to report airtime usage for stations.
-
-When airtime information is present, mac80211 will schedule TXQs
-(through ieee80211_next_txq()) in a way that enforces airtime fairness
-between active stations. This scheduling works the same way as the ath9k
-in-driver airtime fairness scheduling. If no airtime usage is reported
-by the driver, the scheduler will default to round-robin scheduling.
-
-For drivers that don't control TXQ scheduling in software, a new API
-function, ieee80211_txq_may_transmit(), is added which the driver can use
-to check if the TXQ is eligible for transmission, or should be throttled to
-enforce fairness. Calls to this function must also be enclosed in
-ieee80211_txq_schedule_{start,end}() calls to ensure proper locking.
-
-The API ieee80211_txq_may_transmit() also ensures that TXQ list will be
-aligned aginst driver's own round-robin scheduler list. i.e it rotates
-the TXQ list till it makes the requested node becomes the first entry
-in TXQ list. Thus both the TXQ list and driver's list are in sync.
-
-Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
-Signed-off-by: Louie Lu <git@louie.lu>
-[added debugfs write op to reset airtime counter]
-Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
-Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -2304,6 +2304,9 @@ enum ieee80211_hw_flags {
- * supported by HW.
- * @max_nan_de_entries: maximum number of NAN DE functions supported by the
- * device.
-+ *
-+ * @weight_multipler: Driver specific airtime weight multiplier used while
-+ * refilling deficit of each TXQ.
- */
- struct ieee80211_hw {
- struct ieee80211_conf conf;
-@@ -2339,6 +2342,7 @@ struct ieee80211_hw {
- u8 n_cipher_schemes;
- const struct ieee80211_cipher_scheme *cipher_schemes;
- u8 max_nan_de_entries;
-+ u8 weight_multiplier;
- };
-
- static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw,
-@@ -5299,6 +5303,34 @@ void ieee80211_sta_eosp(struct ieee80211
- void ieee80211_send_eosp_nullfunc(struct ieee80211_sta *pubsta, int tid);
-
- /**
-+ * ieee80211_sta_register_airtime - register airtime usage for a sta/tid
-+ *
-+ * Register airtime usage for a given sta on a given tid. The driver can call
-+ * this function to notify mac80211 that a station used a certain amount of
-+ * airtime. This information will be used by the TXQ scheduler to schedule
-+ * stations in a way that ensures airtime fairness.
-+ *
-+ * The reported airtime should as a minimum include all time that is spent
-+ * transmitting to the remote station, including overhead and padding, but not
-+ * including time spent waiting for a TXOP. If the time is not reported by the
-+ * hardware it can in some cases be calculated from the rate and known frame
-+ * composition. When possible, the time should include any failed transmission
-+ * attempts.
-+ *
-+ * The driver can either call this function synchronously for every packet or
-+ * aggregate, or asynchronously as airtime usage information becomes available.
-+ * TX and RX airtime can be reported together, or separately by setting one of
-+ * them to 0.
-+ *
-+ * @pubsta: the station
-+ * @tid: the TID to register airtime for
-+ * @tx_airtime: airtime used during TX (in usec)
-+ * @rx_airtime: airtime used during RX (in usec)
-+ */
-+void ieee80211_sta_register_airtime(struct ieee80211_sta *pubsta, u8 tid,
-+ u32 tx_airtime, u32 rx_airtime);
-+
-+/**
- * ieee80211_iter_keys - iterate keys programmed into the device
- * @hw: pointer obtained from ieee80211_alloc_hw()
- * @vif: virtual interface to iterate, may be %NULL for all
-@@ -6042,6 +6074,33 @@ void ieee80211_txq_schedule_end(struct i
- __releases(txq_lock);
-
- /**
-+ * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit
-+ *
-+ * This function is used to check whether given txq is allowed to transmit by
-+ * the airtime scheduler, and can be used by drivers to access the airtime
-+ * fairness accounting without going using the scheduling order enfored by
-+ * next_txq().
-+ *
-+ * Returns %true if the airtime scheduler thinks the TXQ should be allowed to
-+ * transmit, and %false if it should be throttled. This function can also have
-+ * the side effect of rotating the TXQ in the scheduler rotation, which will
-+ * eventually bring the deficit to positive and allow the station to transmit
-+ * again.
-+ *
-+ * The API ieee80211_txq_may_transmit() also ensures that TXQ list will be
-+ * aligned aginst driver's own round-robin scheduler list. i.e it rotates
-+ * the TXQ list till it makes the requested node becomes the first entry
-+ * in TXQ list. Thus both the TXQ list and driver's list are in sync. If this
-+ * function returns %true, the driver is expected to schedule packets
-+ * for transmission, and then return the TXQ through ieee80211_return_txq().
-+ *
-+ * @hw: pointer as obtained from ieee80211_alloc_hw()
-+ * @txq: pointer obtained from station or virtual interface
-+ */
-+bool ieee80211_txq_may_transmit(struct ieee80211_hw *hw,
-+ struct ieee80211_txq *txq);
-+
-+/**
- * ieee80211_txq_get_depth - get pending frame/byte count of given txq
- *
- * The values are not guaranteed to be coherent with regard to each other, i.e.
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -1434,6 +1434,9 @@ static int sta_apply_parameters(struct i
- if (ieee80211_vif_is_mesh(&sdata->vif))
- sta_apply_mesh_params(local, sta, params);
-
-+ if (params->airtime_weight)
-+ sta->airtime_weight = params->airtime_weight;
-+
- /* set the STA state after all sta info from usermode has been set */
- if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) ||
- set & BIT(NL80211_STA_FLAG_ASSOCIATED)) {
---- a/net/mac80211/debugfs.c
-+++ b/net/mac80211/debugfs.c
-@@ -380,6 +380,9 @@ void debugfs_hw_add(struct ieee80211_loc
- if (local->ops->wake_tx_queue)
- DEBUGFS_ADD_MODE(aqm, 0600);
-
-+ debugfs_create_u16("airtime_flags", 0600,
-+ phyd, &local->airtime_flags);
-+
- statsd = debugfs_create_dir("statistics", phyd);
-
- /* if the dir failed, don't put all the other things into the root! */
---- a/net/mac80211/debugfs_sta.c
-+++ b/net/mac80211/debugfs_sta.c
-@@ -178,9 +178,9 @@ static ssize_t sta_aqm_read(struct file
- txqi->tin.tx_bytes,
- txqi->tin.tx_packets,
- txqi->flags,
-- txqi->flags & (1<<IEEE80211_TXQ_STOP) ? "STOP" : "RUN",
-- txqi->flags & (1<<IEEE80211_TXQ_AMPDU) ? " AMPDU" : "",
-- txqi->flags & (1<<IEEE80211_TXQ_NO_AMSDU) ? " NO-AMSDU" : "");
-+ test_bit(IEEE80211_TXQ_STOP, &txqi->flags) ? "STOP" : "RUN",
-+ test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags) ? " AMPDU" : "",
-+ test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags) ? " NO-AMSDU" : "");
- }
-
- rcu_read_unlock();
-@@ -192,6 +192,64 @@ static ssize_t sta_aqm_read(struct file
- }
- STA_OPS(aqm);
-
-+static ssize_t sta_airtime_read(struct file *file, char __user *userbuf,
-+ size_t count, loff_t *ppos)
-+{
-+ struct sta_info *sta = file->private_data;
-+ struct ieee80211_local *local = sta->sdata->local;
-+ size_t bufsz = 200;
-+ char *buf = kzalloc(bufsz, GFP_KERNEL), *p = buf;
-+ u64 rx_airtime = 0, tx_airtime = 0;
-+ s64 deficit[IEEE80211_NUM_ACS];
-+ ssize_t rv;
-+ int ac;
-+
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
-+ spin_lock_bh(&local->active_txq_lock[ac]);
-+ rx_airtime += sta->airtime[ac].rx_airtime;
-+ tx_airtime += sta->airtime[ac].tx_airtime;
-+ deficit[ac] = sta->airtime[ac].deficit;
-+ spin_unlock_bh(&local->active_txq_lock[ac]);
-+ }
-+
-+ p += scnprintf(p, bufsz + buf - p,
-+ "RX: %llu us\nTX: %llu us\nWeight: %u\n"
-+ "Deficit: VO: %lld us VI: %lld us BE: %lld us BK: %lld us\n",
-+ rx_airtime,
-+ tx_airtime,
-+ sta->airtime_weight,
-+ deficit[0],
-+ deficit[1],
-+ deficit[2],
-+ deficit[3]);
-+
-+ rv = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
-+ kfree(buf);
-+ return rv;
-+}
-+
-+static ssize_t sta_airtime_write(struct file *file, const char __user *userbuf,
-+ size_t count, loff_t *ppos)
-+{
-+ struct sta_info *sta = file->private_data;
-+ struct ieee80211_local *local = sta->sdata->local;
-+ int ac;
-+
-+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
-+ spin_lock_bh(&local->active_txq_lock[ac]);
-+ sta->airtime[ac].rx_airtime = 0;
-+ sta->airtime[ac].tx_airtime = 0;
-+ sta->airtime[ac].deficit = sta->airtime_weight;
-+ spin_unlock_bh(&local->active_txq_lock[ac]);
-+ }
-+
-+ return count;
-+}
-+STA_OPS_RW(airtime);
-+
- static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf,
- size_t count, loff_t *ppos)
- {
-@@ -546,6 +604,10 @@ void ieee80211_sta_debugfs_add(struct st
- if (local->ops->wake_tx_queue)
- DEBUGFS_ADD(aqm);
-
-+ if (wiphy_ext_feature_isset(local->hw.wiphy,
-+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS))
-+ DEBUGFS_ADD(airtime);
-+
- if (sizeof(sta->driver_buffered_tids) == sizeof(u32))
- debugfs_create_x32("driver_buffered_tids", 0400,
- sta->debugfs_dir,
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -1136,6 +1136,8 @@ struct ieee80211_local {
- struct list_head active_txqs[IEEE80211_NUM_ACS];
- u16 schedule_round[IEEE80211_NUM_ACS];
-
-+ u16 airtime_flags;
-+
- const struct ieee80211_ops *ops;
-
- /*
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -656,6 +656,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
- INIT_LIST_HEAD(&local->active_txqs[i]);
- spin_lock_init(&local->active_txq_lock[i]);
- }
-+ local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX;
-
- INIT_LIST_HEAD(&local->chanctx_list);
- mutex_init(&local->chanctx_mtx);
-@@ -1142,6 +1143,9 @@ int ieee80211_register_hw(struct ieee802
- if (!local->hw.max_nan_de_entries)
- local->hw.max_nan_de_entries = IEEE80211_MAX_NAN_INSTANCE_ID;
-
-+ if (!local->hw.weight_multiplier)
-+ local->hw.weight_multiplier = 1;
-+
- result = ieee80211_wep_init(local);
- if (result < 0)
- wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
---- a/net/mac80211/sta_info.c
-+++ b/net/mac80211/sta_info.c
-@@ -90,7 +90,6 @@ static void __cleanup_single_sta(struct
- struct tid_ampdu_tx *tid_tx;
- struct ieee80211_sub_if_data *sdata = sta->sdata;
- struct ieee80211_local *local = sdata->local;
-- struct fq *fq = &local->fq;
- struct ps_data *ps;
-
- if (test_sta_flag(sta, WLAN_STA_PS_STA) ||
-@@ -115,9 +114,7 @@ static void __cleanup_single_sta(struct
- for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
- struct txq_info *txqi = to_txq_info(sta->sta.txq[i]);
-
-- spin_lock_bh(&fq->lock);
- ieee80211_txq_purge(local, txqi);
-- spin_unlock_bh(&fq->lock);
- }
- }
-
-@@ -381,9 +378,12 @@ struct sta_info *sta_info_alloc(struct i
- if (sta_prepare_rate_control(local, sta, gfp))
- goto free_txq;
-
-+ sta->airtime_weight = IEEE80211_DEFAULT_AIRTIME_WEIGHT;
-+
- for (i = 0; i < IEEE80211_NUM_ACS; i++) {
- skb_queue_head_init(&sta->ps_tx_buf[i]);
- skb_queue_head_init(&sta->tx_filtered[i]);
-+ sta->airtime[i].deficit = sta->airtime_weight;
- }
-
- for (i = 0; i < IEEE80211_NUM_TIDS; i++)
-@@ -1821,6 +1821,27 @@ void ieee80211_sta_set_buffered(struct i
- }
- EXPORT_SYMBOL(ieee80211_sta_set_buffered);
-
-+void ieee80211_sta_register_airtime(struct ieee80211_sta *pubsta, u8 tid,
-+ u32 tx_airtime, u32 rx_airtime)
-+{
-+ struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
-+ struct ieee80211_local *local = sta->sdata->local;
-+ u8 ac = ieee80211_ac_from_tid(tid);
-+ u32 airtime = 0;
-+
-+ if (sta->local->airtime_flags & AIRTIME_USE_TX)
-+ airtime += tx_airtime;
-+ if (sta->local->airtime_flags & AIRTIME_USE_RX)
-+ airtime += rx_airtime;
-+
-+ spin_lock_bh(&local->active_txq_lock[ac]);
-+ sta->airtime[ac].tx_airtime += tx_airtime;
-+ sta->airtime[ac].rx_airtime += rx_airtime;
-+ sta->airtime[ac].deficit -= airtime;
-+ spin_unlock_bh(&local->active_txq_lock[ac]);
-+}
-+EXPORT_SYMBOL(ieee80211_sta_register_airtime);
-+
- int sta_info_move_state(struct sta_info *sta,
- enum ieee80211_sta_state new_state)
- {
-@@ -2183,6 +2204,23 @@ void sta_set_sinfo(struct sta_info *sta,
- sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_FAILED);
- }
-
-+ if (!(sinfo->filled & BIT_ULL(NL80211_STA_INFO_RX_DURATION))) {
-+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
-+ sinfo->rx_duration += sta->airtime[ac].rx_airtime;
-+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_DURATION);
-+ }
-+
-+ if (!(sinfo->filled & BIT_ULL(NL80211_STA_INFO_TX_DURATION))) {
-+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
-+ sinfo->tx_duration += sta->airtime[ac].tx_airtime;
-+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_DURATION);
-+ }
-+
-+ if (!(sinfo->filled & BIT_ULL(NL80211_STA_INFO_AIRTIME_WEIGHT))) {
-+ sinfo->airtime_weight = sta->airtime_weight;
-+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_AIRTIME_WEIGHT);
-+ }
-+
- sinfo->rx_dropped_misc = sta->rx_stats.dropped;
- if (sta->pcpu_rx_stats) {
- for_each_possible_cpu(cpu) {
---- a/net/mac80211/sta_info.h
-+++ b/net/mac80211/sta_info.h
-@@ -127,6 +127,16 @@ enum ieee80211_agg_stop_reason {
- AGG_STOP_DESTROY_STA,
- };
-
-+/* Debugfs flags to enable/disable use of RX/TX airtime in scheduler */
-+#define AIRTIME_USE_TX BIT(0)
-+#define AIRTIME_USE_RX BIT(1)
-+
-+struct airtime_info {
-+ u64 rx_airtime;
-+ u64 tx_airtime;
-+ s64 deficit;
-+};
-+
- struct sta_info;
-
- /**
-@@ -563,6 +573,9 @@ struct sta_info {
- } tx_stats;
- u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
-
-+ struct airtime_info airtime[IEEE80211_NUM_ACS];
-+ u16 airtime_weight;
-+
- /*
- * Aggregation information, locked with lock.
- */
---- a/net/mac80211/status.c
-+++ b/net/mac80211/status.c
-@@ -825,6 +825,12 @@ static void __ieee80211_tx_status(struct
- ieee80211_sta_tx_notify(sta->sdata, (void *) skb->data,
- acked, info->status.tx_time);
-
-+ if (info->status.tx_time &&
-+ wiphy_ext_feature_isset(local->hw.wiphy,
-+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS))
-+ ieee80211_sta_register_airtime(&sta->sta, tid,
-+ info->status.tx_time, 0);
-+
- if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
- if (info->flags & IEEE80211_TX_STAT_ACK) {
- if (sta->status_stats.lost_packets)
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1463,8 +1463,11 @@ void ieee80211_txq_purge(struct ieee8021
- struct fq *fq = &local->fq;
- struct fq_tin *tin = &txqi->tin;
-
-+ spin_lock_bh(&fq->lock);
- fq_tin_reset(fq, tin, fq_skb_free_func);
- ieee80211_purge_tx_queue(&local->hw, &txqi->frags);
-+ spin_unlock_bh(&fq->lock);
-+
- spin_lock_bh(&local->active_txq_lock[txqi->txq.ac]);
- list_del_init(&txqi->schedule_order);
- spin_unlock_bh(&local->active_txq_lock[txqi->txq.ac]);
-@@ -3613,11 +3616,28 @@ struct ieee80211_txq *ieee80211_next_txq
-
- lockdep_assert_held(&local->active_txq_lock[ac]);
-
-+ begin:
- txqi = list_first_entry_or_null(&local->active_txqs[ac],
- struct txq_info,
- schedule_order);
-+ if (!txqi)
-+ return NULL;
-+
-+ if (txqi->txq.sta) {
-+ struct sta_info *sta = container_of(txqi->txq.sta,
-+ struct sta_info, sta);
-+
-+ if (sta->airtime[txqi->txq.ac].deficit < 0) {
-+ sta->airtime[txqi->txq.ac].deficit +=
-+ sta->airtime_weight;
-+ list_move_tail(&txqi->schedule_order,
-+ &local->active_txqs[txqi->txq.ac]);
-+ goto begin;
-+ }
-+ }
-+
-
-- if (!txqi || txqi->schedule_round == local->schedule_round[ac])
-+ if (txqi->schedule_round == local->schedule_round[ac])
- return NULL;
-
- list_del_init(&txqi->schedule_order);
-@@ -3635,12 +3655,74 @@ void ieee80211_return_txq(struct ieee802
- lockdep_assert_held(&local->active_txq_lock[txq->ac]);
-
- if (list_empty(&txqi->schedule_order) &&
-- (!skb_queue_empty(&txqi->frags) || txqi->tin.backlog_packets))
-- list_add_tail(&txqi->schedule_order,
-- &local->active_txqs[txq->ac]);
-+ (!skb_queue_empty(&txqi->frags) || txqi->tin.backlog_packets)) {
-+ /* If airtime accounting is active, always enqueue STAs at the
-+ * head of the list to ensure that they only get moved to the
-+ * back by the airtime DRR scheduler once they have a negative
-+ * deficit. A station that already has a negative deficit will
-+ * get immediately moved to the back of the list on the next
-+ * call to ieee80211_next_txq().
-+ */
-+ if (txqi->txq.sta &&
-+ wiphy_ext_feature_isset(local->hw.wiphy,
-+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS))
-+ list_add(&txqi->schedule_order,
-+ &local->active_txqs[txq->ac]);
-+ else
-+ list_add_tail(&txqi->schedule_order,
-+ &local->active_txqs[txq->ac]);
-+ }
- }
- EXPORT_SYMBOL(ieee80211_return_txq);
-
-+bool ieee80211_txq_may_transmit(struct ieee80211_hw *hw,
-+ struct ieee80211_txq *txq)
-+{
-+ struct ieee80211_local *local = hw_to_local(hw);
-+ struct txq_info *iter, *tmp, *txqi = to_txq_info(txq);
-+ struct sta_info *sta;
-+ u8 ac = txq->ac;
-+
-+ lockdep_assert_held(&local->active_txq_lock[ac]);
-+
-+ if (!txqi->txq.sta)
-+ goto out;
-+
-+ if (list_empty(&txqi->schedule_order))
-+ goto out;
-+
-+ list_for_each_entry_safe(iter, tmp, &local->active_txqs[ac],
-+ schedule_order) {
-+ if (iter == txqi)
-+ break;
-+
-+ if (!iter->txq.sta) {
-+ list_move_tail(&iter->schedule_order,
-+ &local->active_txqs[ac]);
-+ continue;
-+ }
-+ sta = container_of(iter->txq.sta, struct sta_info, sta);
-+ if (sta->airtime[ac].deficit < 0)
-+ sta->airtime[ac].deficit += sta->airtime_weight;
-+ list_move_tail(&iter->schedule_order, &local->active_txqs[ac]);
-+ }
-+
-+ sta = container_of(txqi->txq.sta, struct sta_info, sta);
-+ if (sta->airtime[ac].deficit >= 0)
-+ goto out;
-+
-+ sta->airtime[ac].deficit += sta->airtime_weight;
-+ list_move_tail(&txqi->schedule_order, &local->active_txqs[ac]);
-+
-+ return false;
-+out:
-+ if (!list_empty(&txqi->schedule_order))
-+ list_del_init(&txqi->schedule_order);
-+
-+ return true;
-+}
-+EXPORT_SYMBOL(ieee80211_txq_may_transmit);
-+
- void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac)
- __acquires(txq_lock)
- {
diff --git a/package/kernel/mac80211/patches/subsys/323-mac80211-Expose-ieee80211_schedule_txq-function.patch b/package/kernel/mac80211/patches/subsys/323-mac80211-Expose-ieee80211_schedule_txq-function.patch
deleted file mode 100644
index 573f9bd135..0000000000
--- a/package/kernel/mac80211/patches/subsys/323-mac80211-Expose-ieee80211_schedule_txq-function.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@redhat.com>
-Date: Tue, 22 Jan 2019 15:20:16 +0100
-Subject: [PATCH] mac80211: Expose ieee80211_schedule_txq() function
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Since we reworked ieee80211_return_txq() so it assumes that the caller
-takes care of logging, we need another function that can be called without
-holding any locks. Introduce ieee80211_schedule_txq() which serves this
-purpose.
-
-Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -6074,6 +6074,19 @@ void ieee80211_txq_schedule_end(struct i
- __releases(txq_lock);
-
- /**
-+ * ieee80211_schedule_txq - schedule a TXQ for transmission
-+ *
-+ * @hw: pointer as obtained from ieee80211_alloc_hw()
-+ * @txq: pointer obtained from station or virtual interface
-+ *
-+ * Schedules a TXQ for transmission if it is not already scheduled. Takes a
-+ * lock, which means it must *not* be called between
-+ * ieee80211_txq_schedule_start() and ieee80211_txq_schedule_end()
-+ */
-+void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq)
-+ __acquires(txq_lock) __releases(txq_lock);
-+
-+/**
- * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit
- *
- * This function is used to check whether given txq is allowed to transmit by
---- a/net/mac80211/driver-ops.h
-+++ b/net/mac80211/driver-ops.h
-@@ -1179,9 +1179,7 @@ static inline void drv_wake_tx_queue(str
- static inline void schedule_and_wake_txq(struct ieee80211_local *local,
- struct txq_info *txqi)
- {
-- spin_lock_bh(&local->active_txq_lock[txqi->txq.ac]);
-- ieee80211_return_txq(&local->hw, &txqi->txq);
-- spin_unlock_bh(&local->active_txq_lock[txqi->txq.ac]);
-+ ieee80211_schedule_txq(&local->hw, &txqi->txq);
- drv_wake_tx_queue(local, txqi);
- }
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -3675,6 +3675,19 @@ void ieee80211_return_txq(struct ieee802
- }
- EXPORT_SYMBOL(ieee80211_return_txq);
-
-+void ieee80211_schedule_txq(struct ieee80211_hw *hw,
-+ struct ieee80211_txq *txq)
-+ __acquires(txq_lock) __releases(txq_lock)
-+{
-+ struct ieee80211_local *local = hw_to_local(hw);
-+ struct txq_info *txqi = to_txq_info(txq);
-+
-+ spin_lock_bh(&local->active_txq_lock[txq->ac]);
-+ ieee80211_return_txq(hw, txq);
-+ spin_unlock_bh(&local->active_txq_lock[txq->ac]);
-+}
-+EXPORT_SYMBOL(ieee80211_schedule_txq);
-+
- bool ieee80211_txq_may_transmit(struct ieee80211_hw *hw,
- struct ieee80211_txq *txq)
- {
diff --git a/package/kernel/mac80211/patches/subsys/350-mac80211-add-hdrlen-to-ieee80211_tx_data.patch b/package/kernel/mac80211/patches/subsys/350-mac80211-add-hdrlen-to-ieee80211_tx_data.patch
index 2759895c98..e88163eb5d 100644
--- a/package/kernel/mac80211/patches/subsys/350-mac80211-add-hdrlen-to-ieee80211_tx_data.patch
+++ b/package/kernel/mac80211/patches/subsys/350-mac80211-add-hdrlen-to-ieee80211_tx_data.patch
@@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
-@@ -179,6 +179,7 @@ struct ieee80211_tx_data {
+@@ -176,6 +176,7 @@ struct ieee80211_tx_data {
struct ieee80211_tx_rate rate;
unsigned int flags;
@@ -21,7 +21,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -925,7 +925,7 @@ ieee80211_tx_h_fragment(struct ieee80211
+@@ -921,7 +921,7 @@ ieee80211_tx_h_fragment(struct ieee80211
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (void *)skb->data;
int frag_threshold = tx->local->hw.wiphy->frag_threshold;
@@ -30,7 +30,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
int fragnum;
/* no matter what happens, tx->skb moves to tx->skbs */
-@@ -946,8 +946,6 @@ ieee80211_tx_h_fragment(struct ieee80211
+@@ -942,8 +942,6 @@ ieee80211_tx_h_fragment(struct ieee80211
if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU))
return TX_DROP;
@@ -39,7 +39,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/* internal error, why isn't DONTFRAG set? */
if (WARN_ON(skb->len + FCS_LEN <= frag_threshold))
return TX_DROP;
-@@ -1178,6 +1176,8 @@ ieee80211_tx_prepare(struct ieee80211_su
+@@ -1174,6 +1172,8 @@ ieee80211_tx_prepare(struct ieee80211_su
hdr = (struct ieee80211_hdr *) skb->data;
@@ -48,7 +48,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (likely(sta)) {
if (!IS_ERR(sta))
tx->sta = sta;
-@@ -3525,6 +3525,7 @@ begin:
+@@ -3577,6 +3577,7 @@ begin:
tx.local = local;
tx.skb = skb;
tx.sdata = vif_to_sdata(info->control.vif);
@@ -56,7 +56,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (txq->sta)
tx.sta = container_of(txq->sta, struct sta_info, sta);
-@@ -3551,7 +3552,7 @@ begin:
+@@ -3603,7 +3604,7 @@ begin:
if (tx.key &&
(tx.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV))
@@ -65,7 +65,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
ieee80211_xmit_fast_finish(sta->sdata, sta, pn_offs,
tx.key, skb);
-@@ -4008,6 +4009,7 @@ ieee80211_build_data_template(struct iee
+@@ -4058,6 +4059,7 @@ ieee80211_build_data_template(struct iee
hdr = (void *)skb->data;
tx.sta = sta_info_get(sdata, hdr->addr1);
tx.skb = skb;
@@ -75,7 +75,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
rcu_read_unlock();
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
-@@ -1390,6 +1390,7 @@ void ieee80211_send_auth(struct ieee8021
+@@ -1538,6 +1538,7 @@ void ieee80211_send_auth(struct ieee8021
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
@@ -83,7 +83,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
int err;
/* 24 + 6 = header + auth_algo + auth_transaction + status_code */
-@@ -1413,8 +1414,10 @@ void ieee80211_send_auth(struct ieee8021
+@@ -1561,8 +1562,10 @@ void ieee80211_send_auth(struct ieee8021
skb_put_data(skb, extra, extra_len);
if (auth_alg == WLAN_AUTH_SHARED_KEY && transaction == 3) {
@@ -97,7 +97,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
-@@ -89,11 +89,11 @@ static void ieee80211_wep_get_iv(struct
+@@ -86,11 +86,11 @@ static void ieee80211_wep_get_iv(struct
static u8 *ieee80211_wep_add_iv(struct ieee80211_local *local,
struct sk_buff *skb,
@@ -110,7 +110,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
u8 *newhdr;
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PROTECTED);
-@@ -101,7 +101,6 @@ static u8 *ieee80211_wep_add_iv(struct i
+@@ -98,7 +98,6 @@ static u8 *ieee80211_wep_add_iv(struct i
if (WARN_ON(skb_headroom(skb) < IEEE80211_WEP_IV_LEN))
return NULL;
@@ -118,7 +118,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
newhdr = skb_push(skb, IEEE80211_WEP_IV_LEN);
memmove(newhdr, newhdr + IEEE80211_WEP_IV_LEN, hdrlen);
-@@ -160,6 +159,7 @@ int ieee80211_wep_encrypt_data(struct cr
+@@ -157,6 +156,7 @@ int ieee80211_wep_encrypt_data(struct cr
*/
int ieee80211_wep_encrypt(struct ieee80211_local *local,
struct sk_buff *skb,
@@ -126,7 +126,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
const u8 *key, int keylen, int keyidx)
{
u8 *iv;
-@@ -169,7 +169,7 @@ int ieee80211_wep_encrypt(struct ieee802
+@@ -166,7 +166,7 @@ int ieee80211_wep_encrypt(struct ieee802
if (WARN_ON(skb_tailroom(skb) < IEEE80211_WEP_ICV_LEN))
return -1;
@@ -135,7 +135,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (!iv)
return -1;
-@@ -307,13 +307,14 @@ static int wep_encrypt_skb(struct ieee80
+@@ -304,13 +304,14 @@ static int wep_encrypt_skb(struct ieee80
struct ieee80211_key_conf *hw_key = info->control.hw_key;
if (!hw_key) {
@@ -154,7 +154,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
return -1;
--- a/net/mac80211/wep.h
+++ b/net/mac80211/wep.h
-@@ -22,6 +22,7 @@ int ieee80211_wep_encrypt_data(struct cr
+@@ -19,6 +19,7 @@ int ieee80211_wep_encrypt_data(struct cr
size_t klen, u8 *data, size_t data_len);
int ieee80211_wep_encrypt(struct ieee80211_local *local,
struct sk_buff *skb,
@@ -164,7 +164,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
size_t klen, u8 *data, size_t data_len);
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
-@@ -44,7 +44,7 @@ ieee80211_tx_h_michael_mic_add(struct ie
+@@ -41,7 +41,7 @@ ieee80211_tx_h_michael_mic_add(struct ie
skb->len < 24 || !ieee80211_is_data_present(hdr->frame_control))
return TX_CONTINUE;
@@ -173,7 +173,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (skb->len < hdrlen)
return TX_DROP;
-@@ -195,7 +195,6 @@ mic_fail_no_key:
+@@ -192,7 +192,6 @@ mic_fail_no_key:
static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)
{
@@ -181,7 +181,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
struct ieee80211_key *key = tx->key;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
unsigned int hdrlen;
-@@ -210,7 +209,7 @@ static int tkip_encrypt_skb(struct ieee8
+@@ -207,7 +206,7 @@ static int tkip_encrypt_skb(struct ieee8
return 0;
}
@@ -190,7 +190,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
len = skb->len - hdrlen;
if (info->control.hw_key)
-@@ -428,7 +427,7 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -425,7 +424,7 @@ static int ccmp_encrypt_skb(struct ieee8
return 0;
}
@@ -199,7 +199,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
len = skb->len - hdrlen;
if (info->control.hw_key)
-@@ -660,7 +659,7 @@ static int gcmp_encrypt_skb(struct ieee8
+@@ -657,7 +656,7 @@ static int gcmp_encrypt_skb(struct ieee8
return 0;
}
@@ -208,7 +208,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
len = skb->len - hdrlen;
if (info->control.hw_key)
-@@ -800,7 +799,6 @@ static ieee80211_tx_result
+@@ -797,7 +796,6 @@ static ieee80211_tx_result
ieee80211_crypto_cs_encrypt(struct ieee80211_tx_data *tx,
struct sk_buff *skb)
{
@@ -216,7 +216,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
struct ieee80211_key *key = tx->key;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
int hdrlen;
-@@ -816,8 +814,7 @@ ieee80211_crypto_cs_encrypt(struct ieee8
+@@ -813,8 +811,7 @@ ieee80211_crypto_cs_encrypt(struct ieee8
pskb_expand_head(skb, iv_len, 0, GFP_ATOMIC)))
return TX_DROP;
diff --git a/package/kernel/mac80211/patches/subsys/351-mac80211-add-TX_NEEDS_ALIGNED4_SKBS-hw-flag.patch b/package/kernel/mac80211/patches/subsys/351-mac80211-add-TX_NEEDS_ALIGNED4_SKBS-hw-flag.patch
index d8dbecca1b..8d9b6e7de9 100644
--- a/package/kernel/mac80211/patches/subsys/351-mac80211-add-TX_NEEDS_ALIGNED4_SKBS-hw-flag.patch
+++ b/package/kernel/mac80211/patches/subsys/351-mac80211-add-TX_NEEDS_ALIGNED4_SKBS-hw-flag.patch
@@ -20,9 +20,9 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
-@@ -2140,6 +2140,9 @@ struct ieee80211_txq {
- * @IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN: Driver does not report accurate A-MPDU
- * length in tx status information
+@@ -2266,6 +2266,9 @@ struct ieee80211_txq {
+ * @IEEE80211_HW_EXT_KEY_ID_NATIVE: Driver and hardware are supporting Extended
+ * Key ID and can handle two unicast keys per station for Rx and Tx.
*
+ * @IEEE80211_HW_TX_NEEDS_ALIGNED4_SKBS: Driver need aligned skbs to four-byte.
+ * Padding will be added after ieee80211_hdr, before IV/LLC.
@@ -30,15 +30,15 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
-@@ -2186,6 +2189,7 @@ enum ieee80211_hw_flags {
- IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP,
- IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP,
- IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN,
+@@ -2318,6 +2321,7 @@ enum ieee80211_hw_flags {
+ IEEE80211_HW_SUPPORTS_MULTI_BSSID,
+ IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID,
+ IEEE80211_HW_EXT_KEY_ID_NATIVE,
+ IEEE80211_HW_TX_NEEDS_ALIGNED4_SKBS,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
-@@ -2472,6 +2476,40 @@ ieee80211_get_alt_retry_rate(const struc
+@@ -2611,6 +2615,40 @@ ieee80211_get_alt_retry_rate(const struc
void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
/**
@@ -81,7 +81,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211 is capable of taking advantage of many hardware
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
-@@ -1871,6 +1871,10 @@ int ieee80211_if_add(struct ieee80211_lo
+@@ -1877,6 +1877,10 @@ int ieee80211_if_add(struct ieee80211_lo
+ 8 /* rfc1042/bridge tunnel */
- ETH_HLEN /* ethernet hard_header_len */
+ IEEE80211_ENCRYPT_HEADROOM;
@@ -94,7 +94,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
ret = dev_alloc_name(ndev, ndev->name);
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
-@@ -105,13 +105,15 @@ void mesh_path_assign_nexthop(struct mes
+@@ -102,13 +102,15 @@ void mesh_path_assign_nexthop(struct mes
static void prepare_for_gate(struct sk_buff *skb, char *dst_addr,
struct mesh_path *gate_mpath)
{
@@ -113,7 +113,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (!(mshdr->flags & MESH_FLAGS_AE)) {
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
-@@ -2597,7 +2597,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
+@@ -2673,7 +2673,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
struct ieee80211_local *local = rx->local;
struct ieee80211_sub_if_data *sdata = rx->sdata;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
@@ -122,7 +122,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
int tailroom = 0;
hdr = (struct ieee80211_hdr *) skb->data;
-@@ -2690,7 +2690,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
+@@ -2766,7 +2766,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
if (sdata->crypto_tx_tailroom_needed_cnt)
tailroom = IEEE80211_ENCRYPT_TAILROOM;
@@ -133,7 +133,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
sdata->encrypt_headroom,
tailroom, GFP_ATOMIC);
if (!fwd_skb)
-@@ -2722,6 +2724,12 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
+@@ -2798,6 +2800,12 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
return RX_DROP_MONITOR;
}
@@ -148,7 +148,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
out:
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
-@@ -311,7 +311,7 @@ struct ieee80211_fast_tx {
+@@ -308,7 +308,7 @@ struct ieee80211_fast_tx {
u8 hdr_len;
u8 sa_offs, da_offs, pn_offs;
u8 band;
@@ -159,7 +159,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
struct rcu_head rcu_head;
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
-@@ -515,6 +515,7 @@ static void ieee80211_report_used_skb(st
+@@ -512,6 +512,7 @@ static void ieee80211_report_used_skb(st
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (void *)skb->data;
@@ -167,7 +167,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
bool acked = info->flags & IEEE80211_TX_STAT_ACK;
if (dropped)
-@@ -531,7 +532,7 @@ static void ieee80211_report_used_skb(st
+@@ -528,7 +529,7 @@ static void ieee80211_report_used_skb(st
skb->dev = NULL;
} else {
unsigned int hdr_size =
@@ -176,7 +176,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/* Check to see if packet is a TDLS teardown packet */
if (ieee80211_is_data(hdr->frame_control) &&
-@@ -655,9 +656,22 @@ void ieee80211_tx_monitor(struct ieee802
+@@ -652,9 +653,22 @@ void ieee80211_tx_monitor(struct ieee802
struct sk_buff *skb2;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_sub_if_data *sdata;
@@ -201,7 +201,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (WARN_ON_ONCE(skb_headroom(skb) < rtap_len)) {
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
-@@ -201,10 +201,12 @@ void ieee80211_get_tkip_p2k(struct ieee8
+@@ -198,10 +198,12 @@ void ieee80211_get_tkip_p2k(struct ieee8
{
struct ieee80211_key *key = (struct ieee80211_key *)
container_of(keyconf, struct ieee80211_key, conf);
@@ -217,7 +217,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -1175,8 +1175,7 @@ ieee80211_tx_prepare(struct ieee80211_su
+@@ -1171,8 +1171,7 @@ ieee80211_tx_prepare(struct ieee80211_su
info->flags &= ~IEEE80211_TX_INTFL_NEED_TXPROCESSING;
hdr = (struct ieee80211_hdr *) skb->data;
@@ -227,7 +227,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (likely(sta)) {
if (!IS_ERR(sta))
-@@ -2222,7 +2221,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
+@@ -2244,7 +2243,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
goto fail;
hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr);
@@ -236,7 +236,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (skb->len < len_rthdr + hdrlen)
goto fail;
-@@ -2440,7 +2439,7 @@ static struct sk_buff *ieee80211_build_h
+@@ -2463,7 +2462,7 @@ static struct sk_buff *ieee80211_build_h
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_sub_if_data *ap_sdata;
enum nl80211_band band;
@@ -245,7 +245,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (IS_ERR(sta))
sta = NULL;
-@@ -2739,7 +2738,9 @@ static struct sk_buff *ieee80211_build_h
+@@ -2774,7 +2773,9 @@ static struct sk_buff *ieee80211_build_h
}
skb_pull(skb, skip_header_bytes);
@@ -255,7 +255,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/*
* So we need to modify the skb header and hence need a copy of
-@@ -2772,6 +2773,9 @@ static struct sk_buff *ieee80211_build_h
+@@ -2807,6 +2808,9 @@ static struct sk_buff *ieee80211_build_h
memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen);
#endif
@@ -265,7 +265,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (ieee80211_is_data_qos(fc)) {
__le16 *qos_control;
-@@ -2947,6 +2951,8 @@ void ieee80211_check_fast_xmit(struct st
+@@ -2983,6 +2987,8 @@ void ieee80211_check_fast_xmit(struct st
fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
}
@@ -274,7 +274,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/* We store the key here so there's no point in using rcu_dereference()
* but that's fine because the code that changes the pointers will call
* this function after doing so. For a single CPU that would be enough,
-@@ -3525,7 +3531,7 @@ begin:
+@@ -3577,7 +3583,7 @@ begin:
tx.local = local;
tx.skb = skb;
tx.sdata = vif_to_sdata(info->control.vif);
@@ -283,7 +283,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (txq->sta)
tx.sta = container_of(txq->sta, struct sta_info, sta);
-@@ -4009,7 +4015,7 @@ ieee80211_build_data_template(struct iee
+@@ -4059,7 +4065,7 @@ ieee80211_build_data_template(struct iee
hdr = (void *)skb->data;
tx.sta = sta_info_get(sdata, hdr->addr1);
tx.skb = skb;
@@ -294,10 +294,10 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
rcu_read_unlock();
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
-@@ -215,6 +215,7 @@ static const char *hw_flag_names[] = {
- FLAG(DEAUTH_NEED_MGD_TX_PREP),
- FLAG(DOESNT_SUPPORT_QOS_NDP),
- FLAG(TX_STATUS_NO_AMPDU_LEN),
+@@ -272,6 +272,7 @@ static const char *hw_flag_names[] = {
+ FLAG(SUPPORTS_MULTI_BSSID),
+ FLAG(SUPPORTS_ONLY_HE_MULTI_BSSID),
+ FLAG(EXT_KEY_ID_NATIVE),
+ FLAG(TX_NEEDS_ALIGNED4_SKBS),
#undef FLAG
};
diff --git a/package/kernel/mac80211/patches/subsys/352-mac80211-rework-locking-for-txq-scheduling-airtime-f.patch b/package/kernel/mac80211/patches/subsys/352-mac80211-rework-locking-for-txq-scheduling-airtime-f.patch
deleted file mode 100644
index ef67dd1977..0000000000
--- a/package/kernel/mac80211/patches/subsys/352-mac80211-rework-locking-for-txq-scheduling-airtime-f.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 13 Mar 2019 19:09:22 +0100
-Subject: [PATCH] mac80211: rework locking for txq scheduling / airtime
- fairness
-
-Holding the lock around the entire duration of tx scheduling can create
-some nasty lock contention, especially when processing airtime information
-from the tx status or the rx path.
-Improve locking by only holding the active_txq_lock for lookups / scheduling
-list modifications.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -6069,8 +6069,6 @@ struct sk_buff *ieee80211_tx_dequeue(str
- * @hw: pointer as obtained from ieee80211_alloc_hw()
- * @ac: AC number to return packets from.
- *
-- * Should only be called between calls to ieee80211_txq_schedule_start()
-- * and ieee80211_txq_schedule_end().
- * Returns the next txq if successful, %NULL if no queue is eligible. If a txq
- * is returned, it should be returned with ieee80211_return_txq() after the
- * driver has finished scheduling it.
-@@ -6078,51 +6076,41 @@ struct sk_buff *ieee80211_tx_dequeue(str
- struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac);
-
- /**
-- * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq()
-- *
-- * @hw: pointer as obtained from ieee80211_alloc_hw()
-- * @txq: pointer obtained from station or virtual interface
-- *
-- * Should only be called between calls to ieee80211_txq_schedule_start()
-- * and ieee80211_txq_schedule_end().
-- */
--void ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq);
--
--/**
-- * ieee80211_txq_schedule_start - acquire locks for safe scheduling of an AC
-+ * ieee80211_txq_schedule_start - start new scheduling round for TXQs
- *
- * @hw: pointer as obtained from ieee80211_alloc_hw()
- * @ac: AC number to acquire locks for
- *
-- * Acquire locks needed to schedule TXQs from the given AC. Should be called
-- * before ieee80211_next_txq() or ieee80211_return_txq().
-+ * Should be called before ieee80211_next_txq() or ieee80211_return_txq().
- */
--void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac)
-- __acquires(txq_lock);
-+void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac);
-+
-+/* (deprecated) */
-+static inline void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac)
-+{
-+}
-
- /**
-- * ieee80211_txq_schedule_end - release locks for safe scheduling of an AC
-+ * ieee80211_schedule_txq - schedule a TXQ for transmission
- *
- * @hw: pointer as obtained from ieee80211_alloc_hw()
-- * @ac: AC number to acquire locks for
-+ * @txq: pointer obtained from station or virtual interface
- *
-- * Release locks previously acquired by ieee80211_txq_schedule_end().
-+ * Schedules a TXQ for transmission if it is not already scheduled.
- */
--void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac)
-- __releases(txq_lock);
-+void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq);
-
- /**
-- * ieee80211_schedule_txq - schedule a TXQ for transmission
-+ * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq()
- *
- * @hw: pointer as obtained from ieee80211_alloc_hw()
- * @txq: pointer obtained from station or virtual interface
-- *
-- * Schedules a TXQ for transmission if it is not already scheduled. Takes a
-- * lock, which means it must *not* be called between
-- * ieee80211_txq_schedule_start() and ieee80211_txq_schedule_end()
- */
--void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq)
-- __acquires(txq_lock) __releases(txq_lock);
-+static inline void
-+ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq)
-+{
-+ ieee80211_schedule_txq(hw, txq);
-+}
-
- /**
- * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -3619,16 +3619,17 @@ EXPORT_SYMBOL(ieee80211_tx_dequeue);
- struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac)
- {
- struct ieee80211_local *local = hw_to_local(hw);
-+ struct ieee80211_txq *ret = NULL;
- struct txq_info *txqi = NULL;
-
-- lockdep_assert_held(&local->active_txq_lock[ac]);
-+ spin_lock_bh(&local->active_txq_lock[ac]);
-
- begin:
- txqi = list_first_entry_or_null(&local->active_txqs[ac],
- struct txq_info,
- schedule_order);
- if (!txqi)
-- return NULL;
-+ goto out;
-
- if (txqi->txq.sta) {
- struct sta_info *sta = container_of(txqi->txq.sta,
-@@ -3645,21 +3646,25 @@ struct ieee80211_txq *ieee80211_next_txq
-
-
- if (txqi->schedule_round == local->schedule_round[ac])
-- return NULL;
-+ goto out;
-
- list_del_init(&txqi->schedule_order);
- txqi->schedule_round = local->schedule_round[ac];
-- return &txqi->txq;
-+ ret = &txqi->txq;
-+
-+out:
-+ spin_unlock_bh(&local->active_txq_lock[ac]);
-+ return ret;
- }
- EXPORT_SYMBOL(ieee80211_next_txq);
-
--void ieee80211_return_txq(struct ieee80211_hw *hw,
-- struct ieee80211_txq *txq)
-+void ieee80211_schedule_txq(struct ieee80211_hw *hw,
-+ struct ieee80211_txq *txq)
- {
- struct ieee80211_local *local = hw_to_local(hw);
- struct txq_info *txqi = to_txq_info(txq);
-
-- lockdep_assert_held(&local->active_txq_lock[txq->ac]);
-+ spin_lock_bh(&local->active_txq_lock[txq->ac]);
-
- if (list_empty(&txqi->schedule_order) &&
- (!skb_queue_empty(&txqi->frags) || txqi->tin.backlog_packets)) {
-@@ -3679,18 +3684,7 @@ void ieee80211_return_txq(struct ieee802
- list_add_tail(&txqi->schedule_order,
- &local->active_txqs[txq->ac]);
- }
--}
--EXPORT_SYMBOL(ieee80211_return_txq);
-
--void ieee80211_schedule_txq(struct ieee80211_hw *hw,
-- struct ieee80211_txq *txq)
-- __acquires(txq_lock) __releases(txq_lock)
--{
-- struct ieee80211_local *local = hw_to_local(hw);
-- struct txq_info *txqi = to_txq_info(txq);
--
-- spin_lock_bh(&local->active_txq_lock[txq->ac]);
-- ieee80211_return_txq(hw, txq);
- spin_unlock_bh(&local->active_txq_lock[txq->ac]);
- }
- EXPORT_SYMBOL(ieee80211_schedule_txq);
-@@ -3703,7 +3697,7 @@ bool ieee80211_txq_may_transmit(struct i
- struct sta_info *sta;
- u8 ac = txq->ac;
-
-- lockdep_assert_held(&local->active_txq_lock[ac]);
-+ spin_lock_bh(&local->active_txq_lock[ac]);
-
- if (!txqi->txq.sta)
- goto out;
-@@ -3733,34 +3727,27 @@ bool ieee80211_txq_may_transmit(struct i
-
- sta->airtime[ac].deficit += sta->airtime_weight;
- list_move_tail(&txqi->schedule_order, &local->active_txqs[ac]);
-+ spin_unlock_bh(&local->active_txq_lock[ac]);
-
- return false;
- out:
- if (!list_empty(&txqi->schedule_order))
- list_del_init(&txqi->schedule_order);
-+ spin_unlock_bh(&local->active_txq_lock[ac]);
-
- return true;
- }
- EXPORT_SYMBOL(ieee80211_txq_may_transmit);
-
- void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac)
-- __acquires(txq_lock)
- {
- struct ieee80211_local *local = hw_to_local(hw);
-
- spin_lock_bh(&local->active_txq_lock[ac]);
- local->schedule_round[ac]++;
--}
--EXPORT_SYMBOL(ieee80211_txq_schedule_start);
--
--void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac)
-- __releases(txq_lock)
--{
-- struct ieee80211_local *local = hw_to_local(hw);
--
- spin_unlock_bh(&local->active_txq_lock[ac]);
- }
--EXPORT_SYMBOL(ieee80211_txq_schedule_end);
-+EXPORT_SYMBOL(ieee80211_txq_schedule_start);
-
- void __ieee80211_subif_start_xmit(struct sk_buff *skb,
- struct net_device *dev,
diff --git a/package/kernel/mac80211/patches/subsys/353-mac80211-mesh-drop-redundant-rcu_read_lock-unlock-ca.patch b/package/kernel/mac80211/patches/subsys/353-mac80211-mesh-drop-redundant-rcu_read_lock-unlock-ca.patch
deleted file mode 100644
index 86300be4ed..0000000000
--- a/package/kernel/mac80211/patches/subsys/353-mac80211-mesh-drop-redundant-rcu_read_lock-unlock-ca.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 16 Mar 2019 17:43:58 +0100
-Subject: [PATCH] mac80211: mesh: drop redundant rcu_read_lock/unlock calls
-
-The callers of these functions are all within RCU locked sections
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/mesh_hwmp.c
-+++ b/net/mac80211/mesh_hwmp.c
-@@ -1112,16 +1112,13 @@ int mesh_nexthop_resolve(struct ieee8021
- struct mesh_path *mpath;
- struct sk_buff *skb_to_free = NULL;
- u8 *target_addr = hdr->addr3;
-- int err = 0;
-
- /* Nulls are only sent to peers for PS and should be pre-addressed */
- if (ieee80211_is_qos_nullfunc(hdr->frame_control))
- return 0;
-
-- rcu_read_lock();
-- err = mesh_nexthop_lookup(sdata, skb);
-- if (!err)
-- goto endlookup;
-+ if (!mesh_nexthop_lookup(sdata, skb))
-+ return 0;
-
- /* no nexthop found, start resolving */
- mpath = mesh_path_lookup(sdata, target_addr);
-@@ -1129,8 +1126,7 @@ int mesh_nexthop_resolve(struct ieee8021
- mpath = mesh_path_add(sdata, target_addr);
- if (IS_ERR(mpath)) {
- mesh_path_discard_frame(sdata, skb);
-- err = PTR_ERR(mpath);
-- goto endlookup;
-+ return PTR_ERR(mpath);
- }
- }
-
-@@ -1143,13 +1139,10 @@ int mesh_nexthop_resolve(struct ieee8021
- info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
- ieee80211_set_qos_hdr(sdata, skb);
- skb_queue_tail(&mpath->frame_queue, skb);
-- err = -ENOENT;
- if (skb_to_free)
- mesh_path_discard_frame(sdata, skb_to_free);
-
--endlookup:
-- rcu_read_unlock();
-- return err;
-+ return -ENOENT;
- }
-
- /**
-@@ -1169,13 +1162,10 @@ int mesh_nexthop_lookup(struct ieee80211
- struct sta_info *next_hop;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- u8 *target_addr = hdr->addr3;
-- int err = -ENOENT;
-
-- rcu_read_lock();
- mpath = mesh_path_lookup(sdata, target_addr);
--
- if (!mpath || !(mpath->flags & MESH_PATH_ACTIVE))
-- goto endlookup;
-+ return -ENOENT;
-
- if (time_after(jiffies,
- mpath->exp_time -
-@@ -1190,12 +1180,10 @@ int mesh_nexthop_lookup(struct ieee80211
- memcpy(hdr->addr1, next_hop->sta.addr, ETH_ALEN);
- memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN);
- ieee80211_mps_set_frame_flags(sdata, next_hop, hdr);
-- err = 0;
-+ return 0;
- }
-
--endlookup:
-- rcu_read_unlock();
-- return err;
-+ return -ENOENT;
- }
-
- void mesh_path_timer(struct timer_list *t)
---- a/net/mac80211/mesh_pathtbl.c
-+++ b/net/mac80211/mesh_pathtbl.c
-@@ -219,7 +219,7 @@ static struct mesh_path *mpath_lookup(st
- {
- struct mesh_path *mpath;
-
-- mpath = rhashtable_lookup_fast(&tbl->rhead, dst, mesh_rht_params);
-+ mpath = rhashtable_lookup(&tbl->rhead, dst, mesh_rht_params);
-
- if (mpath && mpath_expired(mpath)) {
- spin_lock_bh(&mpath->state_lock);
diff --git a/package/kernel/mac80211/patches/subsys/354-mac80211-calculate-hash-for-fq-without-holding-fq-lo.patch b/package/kernel/mac80211/patches/subsys/354-mac80211-calculate-hash-for-fq-without-holding-fq-lo.patch
deleted file mode 100644
index 2b6d8ab525..0000000000
--- a/package/kernel/mac80211/patches/subsys/354-mac80211-calculate-hash-for-fq-without-holding-fq-lo.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 16 Mar 2019 17:57:38 +0100
-Subject: [PATCH] mac80211: calculate hash for fq without holding fq->lock
- in itxq enqueue
-
-Reduces lock contention on enqueue/dequeue of iTXQ packets
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/fq_impl.h
-+++ b/include/net/fq_impl.h
-@@ -107,21 +107,23 @@ begin:
- return skb;
- }
-
-+static u32 fq_flow_idx(struct fq *fq, struct sk_buff *skb)
-+{
-+ u32 hash = skb_get_hash_perturb(skb, fq->perturbation);
-+
-+ return reciprocal_scale(hash, fq->flows_cnt);
-+}
-+
- static struct fq_flow *fq_flow_classify(struct fq *fq,
-- struct fq_tin *tin,
-+ struct fq_tin *tin, u32 idx,
- struct sk_buff *skb,
- fq_flow_get_default_t get_default_func)
- {
- struct fq_flow *flow;
-- u32 hash;
-- u32 idx;
-
- lockdep_assert_held(&fq->lock);
-
-- hash = skb_get_hash_perturb(skb, fq->perturbation);
-- idx = reciprocal_scale(hash, fq->flows_cnt);
- flow = &fq->flows[idx];
--
- if (flow->tin && flow->tin != tin) {
- flow = get_default_func(fq, tin, idx, skb);
- tin->collisions++;
-@@ -153,7 +155,7 @@ static void fq_recalc_backlog(struct fq
- }
-
- static void fq_tin_enqueue(struct fq *fq,
-- struct fq_tin *tin,
-+ struct fq_tin *tin, u32 idx,
- struct sk_buff *skb,
- fq_skb_free_t free_func,
- fq_flow_get_default_t get_default_func)
-@@ -163,7 +165,7 @@ static void fq_tin_enqueue(struct fq *fq
-
- lockdep_assert_held(&fq->lock);
-
-- flow = fq_flow_classify(fq, tin, skb, get_default_func);
-+ flow = fq_flow_classify(fq, tin, idx, skb, get_default_func);
-
- flow->tin = tin;
- flow->backlog += skb->len;
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -1390,11 +1390,15 @@ static void ieee80211_txq_enqueue(struct
- {
- struct fq *fq = &local->fq;
- struct fq_tin *tin = &txqi->tin;
-+ u32 flow_idx = fq_flow_idx(fq, skb);
-
- ieee80211_set_skb_enqueue_time(skb);
-- fq_tin_enqueue(fq, tin, skb,
-+
-+ spin_lock_bh(&fq->lock);
-+ fq_tin_enqueue(fq, tin, flow_idx, skb,
- fq_skb_free_func,
- fq_flow_get_default_func);
-+ spin_unlock_bh(&fq->lock);
- }
-
- static bool fq_vlan_filter_func(struct fq *fq, struct fq_tin *tin,
-@@ -1564,7 +1568,6 @@ static bool ieee80211_queue_skb(struct i
- struct sta_info *sta,
- struct sk_buff *skb)
- {
-- struct fq *fq = &local->fq;
- struct ieee80211_vif *vif;
- struct txq_info *txqi;
-
-@@ -1582,9 +1585,7 @@ static bool ieee80211_queue_skb(struct i
- if (!txqi)
- return false;
-
-- spin_lock_bh(&fq->lock);
- ieee80211_txq_enqueue(local, txqi, skb);
-- spin_unlock_bh(&fq->lock);
-
- schedule_and_wake_txq(local, txqi);
-
-@@ -3198,6 +3199,7 @@ static bool ieee80211_amsdu_aggregate(st
- u8 max_subframes = sta->sta.max_amsdu_subframes;
- int max_frags = local->hw.max_tx_fragments;
- int max_amsdu_len = sta->sta.max_amsdu_len;
-+ u32 flow_idx;
- int orig_truesize;
- __be16 len;
- void *data;
-@@ -3220,6 +3222,8 @@ static bool ieee80211_amsdu_aggregate(st
- max_amsdu_len = min_t(int, max_amsdu_len,
- sta->sta.max_rc_amsdu_len);
-
-+ flow_idx = fq_flow_idx(fq, skb);
-+
- spin_lock_bh(&fq->lock);
-
- /* TODO: Ideally aggregation should be done on dequeue to remain
-@@ -3227,7 +3231,8 @@ static bool ieee80211_amsdu_aggregate(st
- */
-
- tin = &txqi->tin;
-- flow = fq_flow_classify(fq, tin, skb, fq_flow_get_default_func);
-+ flow = fq_flow_classify(fq, tin, flow_idx, skb,
-+ fq_flow_get_default_func);
- head = skb_peek_tail(&flow->queue);
- if (!head)
- goto unlock;
diff --git a/package/kernel/mac80211/patches/subsys/355-mac80211-run-late-dequeue-late-tx-handlers-without-h.patch b/package/kernel/mac80211/patches/subsys/355-mac80211-run-late-dequeue-late-tx-handlers-without-h.patch
deleted file mode 100644
index 3127c86822..0000000000
--- a/package/kernel/mac80211/patches/subsys/355-mac80211-run-late-dequeue-late-tx-handlers-without-h.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 16 Mar 2019 18:00:12 +0100
-Subject: [PATCH] mac80211: run late dequeue late tx handlers without
- holding fq->lock
-
-Reduces lock contention on enqueue/dequeue of iTXQ packets
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -3507,6 +3507,7 @@ struct sk_buff *ieee80211_tx_dequeue(str
- ieee80211_tx_result r;
- struct ieee80211_vif *vif = txq->vif;
-
-+begin:
- spin_lock_bh(&fq->lock);
-
- if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags) ||
-@@ -3523,11 +3524,12 @@ struct sk_buff *ieee80211_tx_dequeue(str
- if (skb)
- goto out;
-
--begin:
- skb = fq_tin_dequeue(fq, tin, fq_tin_dequeue_func);
- if (!skb)
- goto out;
-
-+ spin_unlock_bh(&fq->lock);
-+
- hdr = (struct ieee80211_hdr *)skb->data;
- info = IEEE80211_SKB_CB(skb);
-
-@@ -3573,8 +3575,11 @@ begin:
-
- skb = __skb_dequeue(&tx.skbs);
-
-- if (!skb_queue_empty(&tx.skbs))
-+ if (!skb_queue_empty(&tx.skbs)) {
-+ spin_lock_bh(&fq->lock);
- skb_queue_splice_tail(&tx.skbs, &txqi->frags);
-+ spin_unlock_bh(&fq->lock);
-+ }
- }
-
- if (skb && skb_has_frag_list(skb) &&
-@@ -3613,6 +3618,7 @@ begin:
- }
-
- IEEE80211_SKB_CB(skb)->control.vif = vif;
-+ return skb;
-
- out:
- spin_unlock_bh(&fq->lock);
diff --git a/package/kernel/mac80211/patches/subsys/356-mac80211-set-NETIF_F_LLTX-when-using-intermediate-tx.patch b/package/kernel/mac80211/patches/subsys/356-mac80211-set-NETIF_F_LLTX-when-using-intermediate-tx.patch
deleted file mode 100644
index 95ab3ab9fb..0000000000
--- a/package/kernel/mac80211/patches/subsys/356-mac80211-set-NETIF_F_LLTX-when-using-intermediate-tx.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 16 Mar 2019 18:01:53 +0100
-Subject: [PATCH] mac80211: set NETIF_F_LLTX when using intermediate tx
- queues
-
-When using iTXQ, tx sequence number allocation and statistics are run at
-dequeue time. Because of that, it is safe to enable NETIF_F_LLTX, which
-allows tx handlers to run on multiple CPUs in parallel.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -1301,6 +1301,7 @@ static void ieee80211_if_setup(struct ne
- static void ieee80211_if_setup_no_queue(struct net_device *dev)
- {
- ieee80211_if_setup(dev);
-+ dev->features |= NETIF_F_LLTX;
- #if LINUX_VERSION_IS_GEQ(4,3,0)
- dev->priv_flags |= IFF_NO_QUEUE;
- #else
diff --git a/package/kernel/mac80211/patches/subsys/357-mac80211-optimize-skb-resizing.patch b/package/kernel/mac80211/patches/subsys/357-mac80211-optimize-skb-resizing.patch
index 82ed1723c0..6ed2884d5e 100644
--- a/package/kernel/mac80211/patches/subsys/357-mac80211-optimize-skb-resizing.patch
+++ b/package/kernel/mac80211/patches/subsys/357-mac80211-optimize-skb-resizing.patch
@@ -24,10 +24,10 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
-@@ -1761,6 +1761,9 @@ void ieee80211_clear_fast_xmit(struct st
- int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
- const u8 *buf, size_t len,
+@@ -1780,6 +1780,9 @@ int ieee80211_tx_control_port(struct wip
const u8 *dest, __be16 proto, bool unencrypted);
+ int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *buf, size_t len);
+int ieee80211_skb_resize(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb, int hdrlen, int hdr_add);
@@ -36,7 +36,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
-@@ -672,6 +672,11 @@ void ieee80211_tx_monitor(struct ieee802
+@@ -669,6 +669,11 @@ void ieee80211_tx_monitor(struct ieee802
}
}
@@ -50,7 +50,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (WARN_ON_ONCE(skb_headroom(skb) < rtap_len)) {
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -1914,37 +1914,53 @@ static bool ieee80211_tx(struct ieee8021
+@@ -1935,37 +1935,53 @@ static bool ieee80211_tx(struct ieee8021
}
/* device xmit handlers */
@@ -123,7 +123,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
wiphy_debug(local->hw.wiphy,
"failed to reallocate TX buffer\n");
return -ENOMEM;
-@@ -1960,18 +1976,8 @@ void ieee80211_xmit(struct ieee80211_sub
+@@ -1981,18 +1997,8 @@ void ieee80211_xmit(struct ieee80211_sub
struct ieee80211_local *local = sdata->local;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr;
@@ -143,7 +143,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
ieee80211_free_txskb(&local->hw, skb);
return;
}
-@@ -2740,30 +2746,14 @@ static struct sk_buff *ieee80211_build_h
+@@ -2774,30 +2780,14 @@ static struct sk_buff *ieee80211_build_h
skb_pull(skb, skip_header_bytes);
padsize = ieee80211_hdr_padsize(&local->hw, hdrlen);
@@ -180,7 +180,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
}
if (encaps_data)
-@@ -3377,7 +3367,6 @@ static bool ieee80211_xmit_fast(struct i
+@@ -3417,7 +3407,6 @@ static bool ieee80211_xmit_fast(struct i
struct ieee80211_local *local = sdata->local;
u16 ethertype = (skb->data[12] << 8) | skb->data[13];
int extra_head = fast_tx->hdr_len - (ETH_HLEN - 2);
@@ -188,7 +188,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
struct ethhdr eth;
struct ieee80211_tx_info *info;
struct ieee80211_hdr *hdr = (void *)fast_tx->hdr;
-@@ -3429,10 +3418,7 @@ static bool ieee80211_xmit_fast(struct i
+@@ -3469,10 +3458,7 @@ static bool ieee80211_xmit_fast(struct i
* as the may-encrypt argument for the resize to not account for
* more room than we already have in 'extra_head'
*/
diff --git a/package/kernel/mac80211/patches/subsys/358-mac80211-make-ieee80211_schedule_txq-schedule-empty-.patch b/package/kernel/mac80211/patches/subsys/358-mac80211-make-ieee80211_schedule_txq-schedule-empty-.patch
deleted file mode 100644
index a0a65f35a8..0000000000
--- a/package/kernel/mac80211/patches/subsys/358-mac80211-make-ieee80211_schedule_txq-schedule-empty-.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 17 Mar 2019 14:26:59 +0100
-Subject: [PATCH] mac80211: make ieee80211_schedule_txq schedule empty TXQs
-
-Currently there is no way for the driver to signal to mac80211 that it should
-schedule a TXQ even if there are no packets on the mac80211 part of that queue.
-This is problematic if the driver has an internal retry queue to deal with
-software A-MPDU retry.
-
-This patch changes the behavior of ieee80211_schedule_txq to always schedule
-the queue, as its only user (ath9k) seems to expect such behavior already:
-it calls this function on tx status and on powersave wakeup whenever its
-internal retry queue is not empty.
-
-Also add an extra argument to ieee80211_return_txq to get the same behavior.
-
-This fixes an issue on ath9k where tx queues with packets to retry (and no
-new packets in mac80211) would not get serviced.
-
-Fixes: 89cea7493a346 ("ath9k: Switch to mac80211 TXQ scheduling and airtime APIs")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -6090,26 +6090,42 @@ static inline void ieee80211_txq_schedul
- {
- }
-
-+void __ieee80211_schedule_txq(struct ieee80211_hw *hw,
-+ struct ieee80211_txq *txq, bool force);
-+
- /**
- * ieee80211_schedule_txq - schedule a TXQ for transmission
- *
- * @hw: pointer as obtained from ieee80211_alloc_hw()
- * @txq: pointer obtained from station or virtual interface
- *
-- * Schedules a TXQ for transmission if it is not already scheduled.
-+ * Schedules a TXQ for transmission if it is not already scheduled,
-+ * even if mac80211 does not have any packets buffered.
-+ *
-+ * The driver may call this function if it has buffered packets for
-+ * this TXQ internally.
- */
--void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq);
-+static inline void
-+ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq)
-+{
-+ __ieee80211_schedule_txq(hw, txq, true);
-+}
-
- /**
- * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq()
- *
- * @hw: pointer as obtained from ieee80211_alloc_hw()
- * @txq: pointer obtained from station or virtual interface
-+ * @force: schedule txq even if mac80211 does not have any buffered packets.
-+ *
-+ * The driver may set force=true if it has buffered packets for this TXQ
-+ * internally.
- */
- static inline void
--ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq)
-+ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq,
-+ bool force)
- {
-- ieee80211_schedule_txq(hw, txq);
-+ __ieee80211_schedule_txq(hw, txq, force);
- }
-
- /**
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -3655,8 +3655,9 @@ out:
- }
- EXPORT_SYMBOL(ieee80211_next_txq);
-
--void ieee80211_schedule_txq(struct ieee80211_hw *hw,
-- struct ieee80211_txq *txq)
-+void __ieee80211_schedule_txq(struct ieee80211_hw *hw,
-+ struct ieee80211_txq *txq,
-+ bool force)
- {
- struct ieee80211_local *local = hw_to_local(hw);
- struct txq_info *txqi = to_txq_info(txq);
-@@ -3664,7 +3665,8 @@ void ieee80211_schedule_txq(struct ieee8
- spin_lock_bh(&local->active_txq_lock[txq->ac]);
-
- if (list_empty(&txqi->schedule_order) &&
-- (!skb_queue_empty(&txqi->frags) || txqi->tin.backlog_packets)) {
-+ (force || !skb_queue_empty(&txqi->frags) ||
-+ txqi->tin.backlog_packets)) {
- /* If airtime accounting is active, always enqueue STAs at the
- * head of the list to ensure that they only get moved to the
- * back by the airtime DRR scheduler once they have a negative
-@@ -3684,7 +3686,7 @@ void ieee80211_schedule_txq(struct ieee8
-
- spin_unlock_bh(&local->active_txq_lock[txq->ac]);
- }
--EXPORT_SYMBOL(ieee80211_schedule_txq);
-+EXPORT_SYMBOL(__ieee80211_schedule_txq);
-
- bool ieee80211_txq_may_transmit(struct ieee80211_hw *hw,
- struct ieee80211_txq *txq)
diff --git a/package/kernel/mac80211/patches/subsys/359-mac80211-un-schedule-TXQs-on-powersave-start.patch b/package/kernel/mac80211/patches/subsys/359-mac80211-un-schedule-TXQs-on-powersave-start.patch
deleted file mode 100644
index 1abb2db7c2..0000000000
--- a/package/kernel/mac80211/patches/subsys/359-mac80211-un-schedule-TXQs-on-powersave-start.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 19 Mar 2019 11:36:12 +0100
-Subject: [PATCH] mac80211: un-schedule TXQs on powersave start
-
-Once a station enters powersave, its queues should not be returned by
-ieee80211_next_txq() anymore. They will be re-scheduled again after the
-station has woken up again
-
-Fixes: 1866760096bf4 ("mac80211: Add TXQ scheduling API")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1508,7 +1508,15 @@ static void sta_ps_start(struct sta_info
- return;
-
- for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) {
-- if (txq_has_queue(sta->sta.txq[tid]))
-+ struct ieee80211_txq *txq = sta->sta.txq[tid];
-+ struct txq_info *txqi = to_txq_info(txq);
-+
-+ spin_lock(&local->active_txq_lock[txq->ac]);
-+ if (!list_empty(&txqi->schedule_order))
-+ list_del_init(&txqi->schedule_order);
-+ spin_unlock(&local->active_txq_lock[txq->ac]);
-+
-+ if (txq_has_queue(txq))
- set_bit(tid, &sta->txq_buffered_tids);
- else
- clear_bit(tid, &sta->txq_buffered_tids);
diff --git a/package/kernel/mac80211/patches/subsys/360-mac80211-when-using-iTXQ-select-the-queue-in-ieee802.patch b/package/kernel/mac80211/patches/subsys/360-mac80211-when-using-iTXQ-select-the-queue-in-ieee802.patch
deleted file mode 100644
index bb3af7317a..0000000000
--- a/package/kernel/mac80211/patches/subsys/360-mac80211-when-using-iTXQ-select-the-queue-in-ieee802.patch
+++ /dev/null
@@ -1,183 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 22 Mar 2019 18:06:03 +0100
-Subject: [PATCH] mac80211: when using iTXQ, select the queue in
- ieee80211_subif_start_xmit
-
-When using iTXQ, the network stack does not need the real queue number, since
-mac80211 is using its internal queues anyway. In that case we can defer
-selecting the queue and remove a redundant station lookup in the tx path to save
-some CPU cycles.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -3753,6 +3753,7 @@ void __ieee80211_subif_start_xmit(struct
- u32 info_flags)
- {
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-+ struct ieee80211_local *local = sdata->local;
- struct sta_info *sta;
- struct sk_buff *next;
-
-@@ -3766,7 +3767,15 @@ void __ieee80211_subif_start_xmit(struct
- if (ieee80211_lookup_ra_sta(sdata, skb, &sta))
- goto out_free;
-
-- if (!IS_ERR_OR_NULL(sta)) {
-+ if (IS_ERR(sta))
-+ sta = NULL;
-+
-+ if (local->ops->wake_tx_queue) {
-+ u16 queue = __ieee80211_select_queue(sdata, sta, skb);
-+ skb_set_queue_mapping(skb, queue);
-+ }
-+
-+ if (sta) {
- struct ieee80211_fast_tx *fast_tx;
-
- /* We need a bit of data queued to build aggregates properly, so
---- a/net/mac80211/wme.c
-+++ b/net/mac80211/wme.c
-@@ -141,6 +141,42 @@ u16 ieee80211_select_queue_80211(struct
- return ieee80211_downgrade_queue(sdata, NULL, skb);
- }
-
-+u16 __ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
-+ struct sta_info *sta, struct sk_buff *skb)
-+{
-+ struct mac80211_qos_map *qos_map;
-+ bool qos;
-+
-+ /* all mesh/ocb stations are required to support WME */
-+ if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
-+ sdata->vif.type == NL80211_IFTYPE_OCB)
-+ qos = true;
-+ else if (sta)
-+ qos = sta->sta.wme;
-+ else
-+ qos = false;
-+
-+ if (!qos) {
-+ skb->priority = 0; /* required for correct WPA/11i MIC */
-+ return IEEE80211_AC_BE;
-+ }
-+
-+ if (skb->protocol == sdata->control_port_protocol) {
-+ skb->priority = 7;
-+ goto downgrade;
-+ }
-+
-+ /* use the data classifier to determine what 802.1d tag the
-+ * data frame has */
-+ qos_map = rcu_dereference(sdata->qos_map);
-+ skb->priority = cfg80211_classify8021d(skb, qos_map ?
-+ &qos_map->qos_map : NULL);
-+
-+ downgrade:
-+ return ieee80211_downgrade_queue(sdata, sta, skb);
-+}
-+
-+
- /* Indicate which queue to use. */
- u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
- struct sk_buff *skb)
-@@ -148,10 +184,12 @@ u16 ieee80211_select_queue(struct ieee80
- struct ieee80211_local *local = sdata->local;
- struct sta_info *sta = NULL;
- const u8 *ra = NULL;
-- bool qos = false;
-- struct mac80211_qos_map *qos_map;
- u16 ret;
-
-+ /* when using iTXQ, we can do this later */
-+ if (local->ops->wake_tx_queue)
-+ return 0;
-+
- if (local->hw.queues < IEEE80211_NUM_ACS || skb->len < 6) {
- skb->priority = 0; /* required for correct WPA/11i MIC */
- return 0;
-@@ -161,10 +199,8 @@ u16 ieee80211_select_queue(struct ieee80
- switch (sdata->vif.type) {
- case NL80211_IFTYPE_AP_VLAN:
- sta = rcu_dereference(sdata->u.vlan.sta);
-- if (sta) {
-- qos = sta->sta.wme;
-+ if (sta)
- break;
-- }
- /* fall through */
- case NL80211_IFTYPE_AP:
- ra = skb->data;
-@@ -172,56 +208,26 @@ u16 ieee80211_select_queue(struct ieee80
- case NL80211_IFTYPE_WDS:
- ra = sdata->u.wds.remote_addr;
- break;
--#ifdef CPTCFG_MAC80211_MESH
-- case NL80211_IFTYPE_MESH_POINT:
-- qos = true;
-- break;
--#endif
- case NL80211_IFTYPE_STATION:
- /* might be a TDLS station */
- sta = sta_info_get(sdata, skb->data);
- if (sta)
-- qos = sta->sta.wme;
-+ break;
-
- ra = sdata->u.mgd.bssid;
- break;
- case NL80211_IFTYPE_ADHOC:
- ra = skb->data;
- break;
-- case NL80211_IFTYPE_OCB:
-- /* all stations are required to support WME */
-- qos = true;
-- break;
- default:
- break;
- }
-
-- if (!sta && ra && !is_multicast_ether_addr(ra)) {
-+ if (!sta && ra && !is_multicast_ether_addr(ra))
- sta = sta_info_get(sdata, ra);
-- if (sta)
-- qos = sta->sta.wme;
-- }
-
-- if (!qos) {
-- skb->priority = 0; /* required for correct WPA/11i MIC */
-- ret = IEEE80211_AC_BE;
-- goto out;
-- }
-+ ret = __ieee80211_select_queue(sdata, sta, skb);
-
-- if (skb->protocol == sdata->control_port_protocol) {
-- skb->priority = 7;
-- goto downgrade;
-- }
--
-- /* use the data classifier to determine what 802.1d tag the
-- * data frame has */
-- qos_map = rcu_dereference(sdata->qos_map);
-- skb->priority = cfg80211_classify8021d(skb, qos_map ?
-- &qos_map->qos_map : NULL);
--
-- downgrade:
-- ret = ieee80211_downgrade_queue(sdata, sta, skb);
-- out:
- rcu_read_unlock();
- return ret;
- }
---- a/net/mac80211/wme.h
-+++ b/net/mac80211/wme.h
-@@ -16,6 +16,8 @@
- u16 ieee80211_select_queue_80211(struct ieee80211_sub_if_data *sdata,
- struct sk_buff *skb,
- struct ieee80211_hdr *hdr);
-+u16 __ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
-+ struct sta_info *sta, struct sk_buff *skb);
- u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
- struct sk_buff *skb);
- void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata,
diff --git a/package/kernel/mac80211/patches/subsys/361-mac80211-minstrel_ht-add-support-for-rates-with-4-sp.patch b/package/kernel/mac80211/patches/subsys/361-mac80211-minstrel_ht-add-support-for-rates-with-4-sp.patch
deleted file mode 100644
index 07b30dfbf7..0000000000
--- a/package/kernel/mac80211/patches/subsys/361-mac80211-minstrel_ht-add-support-for-rates-with-4-sp.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 25 Mar 2019 09:02:13 +0100
-Subject: [PATCH] mac80211: minstrel_ht: add support for rates with 4
- spatial streams
-
-This is needed for the upcoming driver for MT7615 4x4 802.11ac chipsets
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -157,44 +157,54 @@ const struct mcs_group minstrel_mcs_grou
- MCS_GROUP(1, 0, BW_20, 5),
- MCS_GROUP(2, 0, BW_20, 4),
- MCS_GROUP(3, 0, BW_20, 4),
-+ MCS_GROUP(4, 0, BW_20, 4),
-
- MCS_GROUP(1, 1, BW_20, 5),
- MCS_GROUP(2, 1, BW_20, 4),
- MCS_GROUP(3, 1, BW_20, 4),
-+ MCS_GROUP(4, 1, BW_20, 4),
-
- MCS_GROUP(1, 0, BW_40, 4),
- MCS_GROUP(2, 0, BW_40, 4),
- MCS_GROUP(3, 0, BW_40, 4),
-+ MCS_GROUP(4, 0, BW_40, 4),
-
- MCS_GROUP(1, 1, BW_40, 4),
- MCS_GROUP(2, 1, BW_40, 4),
- MCS_GROUP(3, 1, BW_40, 4),
-+ MCS_GROUP(4, 1, BW_40, 4),
-
- CCK_GROUP(8),
-
- VHT_GROUP(1, 0, BW_20, 5),
- VHT_GROUP(2, 0, BW_20, 4),
- VHT_GROUP(3, 0, BW_20, 4),
-+ VHT_GROUP(4, 0, BW_20, 4),
-
- VHT_GROUP(1, 1, BW_20, 5),
- VHT_GROUP(2, 1, BW_20, 4),
- VHT_GROUP(3, 1, BW_20, 4),
-+ VHT_GROUP(4, 1, BW_20, 4),
-
- VHT_GROUP(1, 0, BW_40, 4),
- VHT_GROUP(2, 0, BW_40, 4),
- VHT_GROUP(3, 0, BW_40, 4),
-+ VHT_GROUP(4, 0, BW_40, 3),
-
- VHT_GROUP(1, 1, BW_40, 4),
- VHT_GROUP(2, 1, BW_40, 4),
- VHT_GROUP(3, 1, BW_40, 4),
-+ VHT_GROUP(4, 1, BW_40, 3),
-
- VHT_GROUP(1, 0, BW_80, 4),
- VHT_GROUP(2, 0, BW_80, 4),
- VHT_GROUP(3, 0, BW_80, 4),
-+ VHT_GROUP(4, 0, BW_80, 2),
-
- VHT_GROUP(1, 1, BW_80, 4),
- VHT_GROUP(2, 1, BW_80, 4),
- VHT_GROUP(3, 1, BW_80, 4),
-+ VHT_GROUP(4, 1, BW_80, 2),
- };
-
- static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES] __read_mostly;
---- a/net/mac80211/rc80211_minstrel_ht.h
-+++ b/net/mac80211/rc80211_minstrel_ht.h
-@@ -13,7 +13,7 @@
- * The number of streams can be changed to 2 to reduce code
- * size and memory footprint.
- */
--#define MINSTREL_MAX_STREAMS 3
-+#define MINSTREL_MAX_STREAMS 4
- #define MINSTREL_HT_STREAM_GROUPS 4 /* BW(=2) * SGI(=2) */
- #define MINSTREL_VHT_STREAM_GROUPS 6 /* BW(=3) * SGI(=2) */
-
diff --git a/package/kernel/mac80211/patches/subsys/362-mac80211-minstrel_ht-automatically-calculate-rate-du.patch b/package/kernel/mac80211/patches/subsys/362-mac80211-minstrel_ht-automatically-calculate-rate-du.patch
deleted file mode 100644
index 81d14966f7..0000000000
--- a/package/kernel/mac80211/patches/subsys/362-mac80211-minstrel_ht-automatically-calculate-rate-du.patch
+++ /dev/null
@@ -1,189 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 25 Mar 2019 09:02:52 +0100
-Subject: [PATCH] mac80211: minstrel_ht: automatically calculate rate
- duration shift
-
-A per-group shift was added to reduce the size of the per-rate transmit
-duration field to u16 without sacrificing a lot of precision
-This patch changes the macros to automatically calculate the best value for
-this shift based on the lowest rate within the group.
-This simplifies adding more groups and slightly improves accuracy for some of
-the existing groups.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/rc80211_minstrel_ht.c
-+++ b/net/mac80211/rc80211_minstrel_ht.c
-@@ -51,8 +51,11 @@
- MINSTREL_MAX_STREAMS * _sgi + \
- _streams - 1
-
-+#define GROUP_SHIFT(duration) \
-+ (16 - __builtin_clz(duration))
-+
- /* MCS rate information for an MCS group */
--#define MCS_GROUP(_streams, _sgi, _ht40, _s) \
-+#define __MCS_GROUP(_streams, _sgi, _ht40, _s) \
- [GROUP_IDX(_streams, _sgi, _ht40)] = { \
- .streams = _streams, \
- .shift = _s, \
-@@ -72,6 +75,13 @@
- } \
- }
-
-+#define MCS_GROUP_SHIFT(_streams, _sgi, _ht40) \
-+ GROUP_SHIFT(MCS_DURATION(_streams, _sgi, _ht40 ? 54 : 26))
-+
-+#define MCS_GROUP(_streams, _sgi, _ht40) \
-+ __MCS_GROUP(_streams, _sgi, _ht40, \
-+ MCS_GROUP_SHIFT(_streams, _sgi, _ht40))
-+
- #define VHT_GROUP_IDX(_streams, _sgi, _bw) \
- (MINSTREL_VHT_GROUP_0 + \
- MINSTREL_MAX_STREAMS * 2 * (_bw) + \
-@@ -81,7 +91,7 @@
- #define BW2VBPS(_bw, r3, r2, r1) \
- (_bw == BW_80 ? r3 : _bw == BW_40 ? r2 : r1)
-
--#define VHT_GROUP(_streams, _sgi, _bw, _s) \
-+#define __VHT_GROUP(_streams, _sgi, _bw, _s) \
- [VHT_GROUP_IDX(_streams, _sgi, _bw)] = { \
- .streams = _streams, \
- .shift = _s, \
-@@ -114,6 +124,14 @@
- } \
- }
-
-+#define VHT_GROUP_SHIFT(_streams, _sgi, _bw) \
-+ GROUP_SHIFT(MCS_DURATION(_streams, _sgi, \
-+ BW2VBPS(_bw, 117, 54, 26)))
-+
-+#define VHT_GROUP(_streams, _sgi, _bw) \
-+ __VHT_GROUP(_streams, _sgi, _bw, \
-+ VHT_GROUP_SHIFT(_streams, _sgi, _bw))
-+
- #define CCK_DURATION(_bitrate, _short, _len) \
- (1000 * (10 /* SIFS */ + \
- (_short ? 72 + 24 : 144 + 48) + \
-@@ -129,7 +147,7 @@
- CCK_ACK_DURATION(55, _short) >> _s, \
- CCK_ACK_DURATION(110, _short) >> _s
-
--#define CCK_GROUP(_s) \
-+#define __CCK_GROUP(_s) \
- [MINSTREL_CCK_GROUP] = { \
- .streams = 1, \
- .flags = 0, \
-@@ -140,6 +158,12 @@
- } \
- }
-
-+#define CCK_GROUP_SHIFT \
-+ GROUP_SHIFT(CCK_ACK_DURATION(10, false))
-+
-+#define CCK_GROUP __CCK_GROUP(CCK_GROUP_SHIFT)
-+
-+
- static bool minstrel_vht_only = true;
- module_param(minstrel_vht_only, bool, 0644);
- MODULE_PARM_DESC(minstrel_vht_only,
-@@ -154,57 +178,57 @@ MODULE_PARM_DESC(minstrel_vht_only,
- * BW -> SGI -> #streams
- */
- const struct mcs_group minstrel_mcs_groups[] = {
-- MCS_GROUP(1, 0, BW_20, 5),
-- MCS_GROUP(2, 0, BW_20, 4),
-- MCS_GROUP(3, 0, BW_20, 4),
-- MCS_GROUP(4, 0, BW_20, 4),
-+ MCS_GROUP(1, 0, BW_20),
-+ MCS_GROUP(2, 0, BW_20),
-+ MCS_GROUP(3, 0, BW_20),
-+ MCS_GROUP(4, 0, BW_20),
-
-- MCS_GROUP(1, 1, BW_20, 5),
-- MCS_GROUP(2, 1, BW_20, 4),
-- MCS_GROUP(3, 1, BW_20, 4),
-- MCS_GROUP(4, 1, BW_20, 4),
-+ MCS_GROUP(1, 1, BW_20),
-+ MCS_GROUP(2, 1, BW_20),
-+ MCS_GROUP(3, 1, BW_20),
-+ MCS_GROUP(4, 1, BW_20),
-
-- MCS_GROUP(1, 0, BW_40, 4),
-- MCS_GROUP(2, 0, BW_40, 4),
-- MCS_GROUP(3, 0, BW_40, 4),
-- MCS_GROUP(4, 0, BW_40, 4),
-+ MCS_GROUP(1, 0, BW_40),
-+ MCS_GROUP(2, 0, BW_40),
-+ MCS_GROUP(3, 0, BW_40),
-+ MCS_GROUP(4, 0, BW_40),
-
-- MCS_GROUP(1, 1, BW_40, 4),
-- MCS_GROUP(2, 1, BW_40, 4),
-- MCS_GROUP(3, 1, BW_40, 4),
-- MCS_GROUP(4, 1, BW_40, 4),
-+ MCS_GROUP(1, 1, BW_40),
-+ MCS_GROUP(2, 1, BW_40),
-+ MCS_GROUP(3, 1, BW_40),
-+ MCS_GROUP(4, 1, BW_40),
-
-- CCK_GROUP(8),
-+ CCK_GROUP,
-
-- VHT_GROUP(1, 0, BW_20, 5),
-- VHT_GROUP(2, 0, BW_20, 4),
-- VHT_GROUP(3, 0, BW_20, 4),
-- VHT_GROUP(4, 0, BW_20, 4),
-+ VHT_GROUP(1, 0, BW_20),
-+ VHT_GROUP(2, 0, BW_20),
-+ VHT_GROUP(3, 0, BW_20),
-+ VHT_GROUP(4, 0, BW_20),
-
-- VHT_GROUP(1, 1, BW_20, 5),
-- VHT_GROUP(2, 1, BW_20, 4),
-- VHT_GROUP(3, 1, BW_20, 4),
-- VHT_GROUP(4, 1, BW_20, 4),
-+ VHT_GROUP(1, 1, BW_20),
-+ VHT_GROUP(2, 1, BW_20),
-+ VHT_GROUP(3, 1, BW_20),
-+ VHT_GROUP(4, 1, BW_20),
-
-- VHT_GROUP(1, 0, BW_40, 4),
-- VHT_GROUP(2, 0, BW_40, 4),
-- VHT_GROUP(3, 0, BW_40, 4),
-- VHT_GROUP(4, 0, BW_40, 3),
-+ VHT_GROUP(1, 0, BW_40),
-+ VHT_GROUP(2, 0, BW_40),
-+ VHT_GROUP(3, 0, BW_40),
-+ VHT_GROUP(4, 0, BW_40),
-
-- VHT_GROUP(1, 1, BW_40, 4),
-- VHT_GROUP(2, 1, BW_40, 4),
-- VHT_GROUP(3, 1, BW_40, 4),
-- VHT_GROUP(4, 1, BW_40, 3),
-+ VHT_GROUP(1, 1, BW_40),
-+ VHT_GROUP(2, 1, BW_40),
-+ VHT_GROUP(3, 1, BW_40),
-+ VHT_GROUP(4, 1, BW_40),
-
-- VHT_GROUP(1, 0, BW_80, 4),
-- VHT_GROUP(2, 0, BW_80, 4),
-- VHT_GROUP(3, 0, BW_80, 4),
-- VHT_GROUP(4, 0, BW_80, 2),
-+ VHT_GROUP(1, 0, BW_80),
-+ VHT_GROUP(2, 0, BW_80),
-+ VHT_GROUP(3, 0, BW_80),
-+ VHT_GROUP(4, 0, BW_80),
-
-- VHT_GROUP(1, 1, BW_80, 4),
-- VHT_GROUP(2, 1, BW_80, 4),
-- VHT_GROUP(3, 1, BW_80, 4),
-- VHT_GROUP(4, 1, BW_80, 2),
-+ VHT_GROUP(1, 1, BW_80),
-+ VHT_GROUP(2, 1, BW_80),
-+ VHT_GROUP(3, 1, BW_80),
-+ VHT_GROUP(4, 1, BW_80),
- };
-
- static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES] __read_mostly;
diff --git a/package/kernel/mac80211/patches/subsys/390-nl-mac-80211-allow-4addr-AP-operation-on-crypto-cont.patch b/package/kernel/mac80211/patches/subsys/390-nl-mac-80211-allow-4addr-AP-operation-on-crypto-cont.patch
deleted file mode 100644
index d5b08b4410..0000000000
--- a/package/kernel/mac80211/patches/subsys/390-nl-mac-80211-allow-4addr-AP-operation-on-crypto-cont.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From 33d915d9e8ce811d8958915ccd18d71a66c7c495 Mon Sep 17 00:00:00 2001
-From: Manikanta Pubbisetty <mpubbise@codeaurora.org>
-Date: Wed, 8 May 2019 14:55:33 +0530
-Subject: [PATCH] {nl,mac}80211: allow 4addr AP operation on crypto controlled
- devices
-
-As per the current design, in the case of sw crypto controlled devices,
-it is the device which advertises the support for AP/VLAN iftype based
-on it's ability to tranmsit packets encrypted in software
-(In VLAN functionality, group traffic generated for a specific
-VLAN group is always encrypted in software). Commit db3bdcb9c3ff
-("mac80211: allow AP_VLAN operation on crypto controlled devices")
-has introduced this change.
-
-Since 4addr AP operation also uses AP/VLAN iftype, this conditional
-way of advertising AP/VLAN support has broken 4addr AP mode operation on
-crypto controlled devices which do not support VLAN functionality.
-
-In the case of ath10k driver, not all firmwares have support for VLAN
-functionality but all can support 4addr AP operation. Because AP/VLAN
-support is not advertised for these devices, 4addr AP operations are
-also blocked.
-
-Fix this by allowing 4addr operation on devices which do not support
-AP/VLAN iftype but can support 4addr AP operation (decision is based on
-the wiphy flag WIPHY_FLAG_4ADDR_AP).
-
-Cc: stable@vger.kernel.org
-Fixes: db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices")
-Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
- include/net/cfg80211.h | 3 ++-
- net/mac80211/util.c | 4 +++-
- net/wireless/core.c | 6 +++++-
- net/wireless/nl80211.c | 8 ++++++--
- 4 files changed, 16 insertions(+), 5 deletions(-)
-
---- a/include/net/cfg80211.h
-+++ b/include/net/cfg80211.h
-@@ -3457,7 +3457,8 @@ struct cfg80211_ops {
- * on wiphy_new(), but can be changed by the driver if it has a good
- * reason to override the default
- * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
-- * on a VLAN interface)
-+ * on a VLAN interface). This flag also serves an extra purpose of
-+ * supporting 4ADDR AP mode on devices which do not support AP/VLAN iftype.
- * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
- * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the
- * control port protocol ethertype. The device also honours the
---- a/net/mac80211/util.c
-+++ b/net/mac80211/util.c
-@@ -3626,7 +3626,9 @@ int ieee80211_check_combinations(struct
- }
-
- /* Always allow software iftypes */
-- if (local->hw.wiphy->software_iftypes & BIT(iftype)) {
-+ if (local->hw.wiphy->software_iftypes & BIT(iftype) ||
-+ (iftype == NL80211_IFTYPE_AP_VLAN &&
-+ local->hw.wiphy->flags & WIPHY_FLAG_4ADDR_AP)) {
- if (radar_detect)
- return -EINVAL;
- return 0;
---- a/net/wireless/core.c
-+++ b/net/wireless/core.c
-@@ -1351,8 +1351,12 @@ static int cfg80211_netdev_notifier_call
- }
- break;
- case NETDEV_PRE_UP:
-- if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)))
-+ if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)) &&
-+ !(wdev->iftype == NL80211_IFTYPE_AP_VLAN &&
-+ rdev->wiphy.flags & WIPHY_FLAG_4ADDR_AP &&
-+ wdev->use_4addr))
- return notifier_from_errno(-EOPNOTSUPP);
-+
- if (rfkill_blocked(rdev->rfkill))
- return notifier_from_errno(-ERFKILL);
- break;
---- a/net/wireless/nl80211.c
-+++ b/net/wireless/nl80211.c
-@@ -3194,8 +3194,7 @@ static int nl80211_new_interface(struct
- return -EINVAL;
- }
-
-- if (!rdev->ops->add_virtual_intf ||
-- !(rdev->wiphy.interface_modes & (1 << type)))
-+ if (!rdev->ops->add_virtual_intf)
- return -EOPNOTSUPP;
-
- if ((type == NL80211_IFTYPE_P2P_DEVICE || type == NL80211_IFTYPE_NAN ||
-@@ -3214,6 +3213,11 @@ static int nl80211_new_interface(struct
- return err;
- }
-
-+ if (!(rdev->wiphy.interface_modes & (1 << type)) &&
-+ !(type == NL80211_IFTYPE_AP_VLAN && params.use_4addr &&
-+ rdev->wiphy.flags & WIPHY_FLAG_4ADDR_AP))
-+ return -EOPNOTSUPP;
-+
- err = nl80211_parse_mon_options(rdev, type, info, &params);
- if (err < 0)
- return err;
diff --git a/package/kernel/mac80211/patches/subsys/522-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/subsys/522-mac80211_configure_antenna_gain.patch
index 4dcd7b5fcc..7960039fd7 100644
--- a/package/kernel/mac80211/patches/subsys/522-mac80211_configure_antenna_gain.patch
+++ b/package/kernel/mac80211/patches/subsys/522-mac80211_configure_antenna_gain.patch
@@ -1,6 +1,6 @@
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
-@@ -2968,6 +2968,7 @@ struct cfg80211_external_auth_params {
+@@ -3322,6 +3322,7 @@ struct cfg80211_update_owe_info {
* (as advertised by the nl80211 feature flag.)
* @get_tx_power: store the current TX power into the dbm variable;
* return 0 if successful
@@ -8,7 +8,7 @@
*
* @set_wds_peer: set the WDS peer for a WDS interface
*
-@@ -3268,6 +3269,7 @@ struct cfg80211_ops {
+@@ -3634,6 +3635,7 @@ struct cfg80211_ops {
enum nl80211_tx_power_setting type, int mbm);
int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
int *dbm);
@@ -18,7 +18,7 @@
const u8 *addr);
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
-@@ -1395,6 +1395,7 @@ enum ieee80211_smps_mode {
+@@ -1471,6 +1471,7 @@ enum ieee80211_smps_mode {
*
* @power_level: requested transmit power (in dBm), backward compatibility
* value only that is set to the minimum of all interfaces
@@ -26,7 +26,7 @@
*
* @chandef: the channel definition to tune to
* @radar_enabled: whether radar detection is enabled
-@@ -1415,6 +1416,7 @@ enum ieee80211_smps_mode {
+@@ -1491,6 +1492,7 @@ enum ieee80211_smps_mode {
struct ieee80211_conf {
u32 flags;
int power_level, dynamic_ps_timeout;
@@ -36,9 +36,9 @@
u8 ps_dtim_period;
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
-@@ -2244,6 +2244,9 @@ enum nl80211_commands {
- * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
- * scheduler.
+@@ -2341,6 +2341,9 @@ enum nl80211_commands {
+ * should be picking up the lowest tx power, either tx power per-interface
+ * or per-station.
*
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
@@ -46,9 +46,9 @@
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2693,6 +2696,8 @@ enum nl80211_attrs {
-
- NL80211_ATTR_AIRTIME_WEIGHT,
+@@ -2794,6 +2797,8 @@ enum nl80211_attrs {
+ NL80211_ATTR_STA_TX_POWER_SETTING,
+ NL80211_ATTR_STA_TX_POWER,
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
@@ -57,7 +57,7 @@
__NL80211_ATTR_AFTER_LAST,
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -2505,6 +2505,19 @@ static int ieee80211_get_tx_power(struct
+@@ -2577,6 +2577,19 @@ static int ieee80211_get_tx_power(struct
return 0;
}
@@ -77,7 +77,7 @@
static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
const u8 *addr)
{
-@@ -3872,6 +3885,7 @@ const struct cfg80211_ops mac80211_confi
+@@ -3990,6 +4003,7 @@ const struct cfg80211_ops mac80211_confi
.set_wiphy_params = ieee80211_set_wiphy_params,
.set_tx_power = ieee80211_set_tx_power,
.get_tx_power = ieee80211_get_tx_power,
@@ -87,7 +87,7 @@
CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
-@@ -1365,6 +1365,7 @@ struct ieee80211_local {
+@@ -1373,6 +1373,7 @@ struct ieee80211_local {
int dynamic_ps_forced_timeout;
int user_power_level; /* in dBm, for all interfaces */
@@ -97,7 +97,7 @@
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
-@@ -94,7 +94,7 @@ static u32 ieee80211_hw_conf_chan(struct
+@@ -92,7 +92,7 @@ static u32 ieee80211_hw_conf_chan(struct
struct ieee80211_sub_if_data *sdata;
struct cfg80211_chan_def chandef = {};
u32 changed = 0;
@@ -106,7 +106,7 @@
u32 offchannel_flag;
offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
-@@ -151,6 +151,12 @@ static u32 ieee80211_hw_conf_chan(struct
+@@ -149,6 +149,12 @@ static u32 ieee80211_hw_conf_chan(struct
}
rcu_read_unlock();
@@ -119,7 +119,7 @@
if (local->hw.conf.power_level != power) {
changed |= IEEE80211_CONF_CHANGE_POWER;
local->hw.conf.power_level = power;
-@@ -626,6 +632,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
+@@ -638,6 +644,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
IEEE80211_RADIOTAP_MCS_HAVE_BW;
local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
@@ -129,15 +129,15 @@
local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
-@@ -431,6 +431,7 @@ static const struct nla_policy nl80211_p
- [NL80211_ATTR_HE_CAPABILITY] = { .type = NLA_BINARY,
- .len = NL80211_HE_MAX_CAPABILITY_LEN },
+@@ -571,6 +571,7 @@ const struct nla_policy nl80211_policy[N
+ [NL80211_ATTR_PEER_MEASUREMENTS] =
+ NLA_POLICY_NESTED(nl80211_pmsr_attr_policy),
[NL80211_ATTR_AIRTIME_WEIGHT] = NLA_POLICY_MIN(NLA_U16, 1),
+ [NL80211_ATTR_WIPHY_ANTENNA_GAIN] = { .type = NLA_U32 },
};
/* policy for the key attributes */
-@@ -2588,6 +2589,20 @@ static int nl80211_set_wiphy(struct sk_b
+@@ -2866,6 +2867,20 @@ static int nl80211_set_wiphy(struct sk_b
if (result)
return result;
}
diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index 5f15684d30..5c0993a7b7 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -1,45 +1,283 @@
+diff --git a/nl80211.h b/nl80211.h
+index 31ae5c7..9fb7370 100644
--- a/nl80211.h
+++ b/nl80211.h
-@@ -2299,6 +2299,12 @@ enum nl80211_commands {
+@@ -11,7 +11,7 @@
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ * Copyright 2015-2017 Intel Deutschland GmbH
+- * Copyright (C) 2018 Intel Corporation
++ * Copyright (C) 2018-2019 Intel Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+@@ -1065,6 +1065,26 @@
+ * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
+ * determining the width and type.
+ *
++ * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to
++ * offload OWE processing to user space. This intends to support
++ * OWE AKM by the host drivers that implement SME but rely
++ * on the user space for the cryptographic/DH IE processing in AP mode.
++ *
++ * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric
++ * refreshing, is that from one mesh point we be able to send some data
++ * frames to other mesh points which are not currently selected as a
++ * primary traffic path, but which are only 1 hop away. The absence of
++ * the primary path to the chosen node makes it necessary to apply some
++ * form of marking on a chosen packet stream so that the packets can be
++ * properly steered to the selected node for testing, and not by the
++ * regular mesh path lookup. Further, the packets must be of type data
++ * so that the rate control (often embedded in firmware) is used for
++ * rate selection.
++ *
++ * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
++ * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
++ * content. The frame is ethernet data.
++ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+@@ -1285,6 +1305,10 @@ enum nl80211_commands {
+
+ NL80211_CMD_NOTIFY_RADAR,
+
++ NL80211_CMD_UPDATE_OWE_INFO,
++
++ NL80211_CMD_PROBE_MESH_LINK,
++
+ /* add new commands above here */
+
+ /* used to define NL80211_CMD_MAX below */
+@@ -1565,6 +1589,12 @@ enum nl80211_commands {
+ * (a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which key management algorithm(s) to use (an array of u32).
++ * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
++ * indicating the supported AKM suites, intended for specific drivers which
++ * implement SME and have constraints on which AKMs are supported and also
++ * the cases where an AKM support is offloaded to the driver/firmware.
++ * If there is no such notification from the driver, user space should
++ * assume the driver supports all the AKM suites.
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ * sent out by the card, for ROAM and successful CONNECT events.
+@@ -2260,10 +2290,10 @@ enum nl80211_commands {
+ * &enum nl80211_external_auth_action value). This is used with the
+ * %NL80211_CMD_EXTERNAL_AUTH request event.
+ * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
+- * space supports external authentication. This attribute shall be used
+- * only with %NL80211_CMD_CONNECT request. The driver may offload
+- * authentication processing to user space if this capability is indicated
+- * in NL80211_CMD_CONNECT requests from the user space.
++ * space supports external authentication. This attribute shall be used
++ * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
++ * may offload authentication processing to user space if this capability
++ * is indicated in the respective requests from the user space.
+ *
+ * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this
+ * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
+@@ -2299,6 +2329,21 @@ enum nl80211_commands {
* This is also used for capability advertisement in the wiphy information,
* with the appropriate sub-attributes.
*
+ * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
+ * scheduler.
+ *
++ * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for
++ * station associated with the AP. See &enum nl80211_tx_power_setting for
++ * possible values.
++ * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This
++ * allows to set Tx power for a station. If this attribute is not included,
++ * the default per-interface tx power setting will be overriding. Driver
++ * should be picking up the lowest tx power, either tx power per-interface
++ * or per-station.
++ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2748,6 +2754,10 @@ enum nl80211_attrs {
+@@ -2748,6 +2793,12 @@ enum nl80211_attrs {
NL80211_ATTR_PEER_MEASUREMENTS,
+ NL80211_ATTR_AIRTIME_WEIGHT,
++ NL80211_ATTR_STA_TX_POWER_SETTING,
++ NL80211_ATTR_STA_TX_POWER,
+
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -3125,6 +3135,9 @@ enum nl80211_sta_bss_param {
+@@ -2791,7 +2842,7 @@ enum nl80211_attrs {
+
+ #define NL80211_MAX_SUPP_RATES 32
+ #define NL80211_MAX_SUPP_HT_RATES 77
+-#define NL80211_MAX_SUPP_REG_RULES 64
++#define NL80211_MAX_SUPP_REG_RULES 128
+ #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
+ #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
+ #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
+@@ -3125,6 +3176,10 @@ enum nl80211_sta_bss_param {
* might not be fully accurate.
* @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a
* mesh gate (u8, 0 or 1)
+ * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames
+ * sent to the station (u64, usec)
+ * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
++ * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
-@@ -3168,6 +3181,8 @@ enum nl80211_sta_info {
+@@ -3168,6 +3223,9 @@ enum nl80211_sta_info {
NL80211_STA_INFO_RX_MPDUS,
NL80211_STA_INFO_FCS_ERROR_COUNT,
NL80211_STA_INFO_CONNECTED_TO_GATE,
+ NL80211_STA_INFO_TX_DURATION,
+ NL80211_STA_INFO_AIRTIME_WEIGHT,
++ NL80211_STA_INFO_AIRTIME_LINK_METRIC,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
+@@ -3277,8 +3335,10 @@ enum nl80211_mpath_flags {
+ * &enum nl80211_mpath_flags;
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
++ * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
++ * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination
+ * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
+- * currently defind
++ * currently defined
+ * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
+ */
+ enum nl80211_mpath_info {
+@@ -3290,6 +3350,8 @@ enum nl80211_mpath_info {
+ NL80211_MPATH_INFO_FLAGS,
+ NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
+ NL80211_MPATH_INFO_DISCOVERY_RETRIES,
++ NL80211_MPATH_INFO_HOP_COUNT,
++ NL80211_MPATH_INFO_PATH_CHANGE,
+
+ /* keep last */
+ __NL80211_MPATH_INFO_AFTER_LAST,
+@@ -3618,6 +3680,14 @@ enum nl80211_reg_rule_attr {
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
+ * (this cannot be used together with SSID).
++ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
++ * band specific minimum rssi thresholds for the bands defined in
++ * enum nl80211_band. The minimum rssi threshold value(s32) specific to a
++ * band shall be encapsulated in attribute with type value equals to one
++ * of the NL80211_BAND_* defined in enum nl80211_band. For example, the
++ * minimum rssi threshold value for 2.4GHZ band shall be encapsulated
++ * within an attribute of type NL80211_BAND_2GHZ. And one or more of such
++ * attributes will be nested within this attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ * attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+@@ -3630,6 +3700,7 @@ enum nl80211_sched_scan_match_attr {
+ NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
+ NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
++ NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
+
+ /* keep last */
+ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+@@ -4114,6 +4185,27 @@ enum nl80211_channel_type {
+ NL80211_CHAN_HT40PLUS
+ };
+
++/**
++ * enum nl80211_key_mode - Key mode
++ *
++ * @NL80211_KEY_RX_TX: (Default)
++ * Key can be used for Rx and Tx immediately
++ *
++ * The following modes can only be selected for unicast keys and when the
++ * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID:
++ *
++ * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY:
++ * Unicast key can only be used for Rx, Tx not allowed, yet
++ * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY:
++ * The unicast key identified by idx and mac is cleared for Tx and becomes
++ * the preferred Tx key for the station.
++ */
++enum nl80211_key_mode {
++ NL80211_KEY_RX_TX,
++ NL80211_KEY_NO_TX,
++ NL80211_KEY_SET_TX
++};
++
+ /**
+ * enum nl80211_chan_width - channel width definitions
+ *
+@@ -4357,6 +4449,9 @@ enum nl80211_key_default_types {
+ * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ * attributes, specifying what a key should be set as default as.
+ * See &enum nl80211_key_default_types.
++ * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
++ * Defaults to @NL80211_KEY_RX_TX.
++ *
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+@@ -4370,6 +4465,7 @@ enum nl80211_key_attributes {
+ NL80211_KEY_DEFAULT_MGMT,
+ NL80211_KEY_TYPE,
+ NL80211_KEY_DEFAULT_TYPES,
++ NL80211_KEY_MODE,
+
+ /* keep last */
+ __NL80211_KEY_AFTER_LAST,
+@@ -5315,6 +5411,21 @@ enum nl80211_feature_flags {
+ * able to rekey an in-use key correctly. Userspace must not rekey PTK keys
+ * if this flag is not set. Ignoring this can leak clear text packets and/or
+ * freeze the connection.
++ * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for
++ * Individually Addressed Frames" from IEEE802.11-2016.
++ *
++ * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
++ * fairness for transmitted packets and has enabled airtime fairness
++ * scheduling.
++ *
++ * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
++ * (set/del PMKSA operations) in AP mode.
++ *
++ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
++ * filtering of sched scan results using band specific RSSI thresholds.
++ *
++ * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
++ * to a station.
+ *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+@@ -5355,6 +5466,11 @@ enum nl80211_ext_feature_index {
+ NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
+ NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
+ NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
++ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
++ NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
++ NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
++ NL80211_EXT_FEATURE_EXT_KEY_ID,
++ NL80211_EXT_FEATURE_STA_TX_PWR,
+
+ /* add new features before the definition below */
+ NUM_NL80211_EXT_FEATURES,
+@@ -5606,9 +5722,14 @@ enum nl80211_crit_proto_id {
+ * Used by cfg80211_rx_mgmt()
+ *
+ * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
++ * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload
++ * the authentication. Exclusively defined for host drivers that
++ * advertises the SME functionality but would like the userspace
++ * to handle certain authentication algorithms (e.g. SAE).
+ */
+ enum nl80211_rxmgmt_flags {
+ NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
++ NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1,
+ };
+
+ /*
diff --git a/target/linux/generic/backport-4.9/041-mm-rename-__alloc_page_frag-to-page_frag_alloc-and-_.patch b/target/linux/generic/backport-4.9/041-mm-rename-__alloc_page_frag-to-page_frag_alloc-and-_.patch
deleted file mode 100644
index facc43004e..0000000000
--- a/target/linux/generic/backport-4.9/041-mm-rename-__alloc_page_frag-to-page_frag_alloc-and-_.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From: Alexander Duyck <alexander.h.duyck@intel.com>
-Date: Tue, 10 Jan 2017 16:58:06 -0800
-Subject: [PATCH] mm: rename __alloc_page_frag to page_frag_alloc and
- __free_page_frag to page_frag_free
-
-Patch series "Page fragment updates", v4.
-
-This patch series takes care of a few cleanups for the page fragments
-API.
-
-First we do some renames so that things are much more consistent. First
-we move the page_frag_ portion of the name to the front of the functions
-names. Secondly we split out the cache specific functions from the
-other page fragment functions by adding the word "cache" to the name.
-
-Finally I added a bit of documentation that will hopefully help to
-explain some of this. I plan to revisit this later as we get things
-more ironed out in the near future with the changes planned for the DMA
-setup to support eXpress Data Path.
-
-This patch (of 3):
-
-This patch renames the page frag functions to be more consistent with
-other APIs. Specifically we place the name page_frag first in the name
-and then have either an alloc or free call name that we append as the
-suffix. This makes it a bit clearer in terms of naming.
-
-In addition we drop the leading double underscores since we are
-technically no longer a backing interface and instead the front end that
-is called from the networking APIs.
-
-Link: http://lkml.kernel.org/r/20170104023854.13451.67390.stgit@localhost.localdomain
-Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
-
---- a/include/linux/gfp.h
-+++ b/include/linux/gfp.h
-@@ -508,9 +508,9 @@ extern void free_hot_cold_page_list(stru
- struct page_frag_cache;
- extern void __page_frag_drain(struct page *page, unsigned int order,
- unsigned int count);
--extern void *__alloc_page_frag(struct page_frag_cache *nc,
-- unsigned int fragsz, gfp_t gfp_mask);
--extern void __free_page_frag(void *addr);
-+extern void *page_frag_alloc(struct page_frag_cache *nc,
-+ unsigned int fragsz, gfp_t gfp_mask);
-+extern void page_frag_free(void *addr);
-
- #define __free_page(page) __free_pages((page), 0)
- #define free_page(addr) free_pages((addr), 0)
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2476,7 +2476,7 @@ static inline struct sk_buff *netdev_all
-
- static inline void skb_free_frag(void *addr)
- {
-- __free_page_frag(addr);
-+ page_frag_free(addr);
- }
-
- void *napi_alloc_frag(unsigned int fragsz);
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -3949,8 +3949,8 @@ void __page_frag_drain(struct page *page
- }
- EXPORT_SYMBOL(__page_frag_drain);
-
--void *__alloc_page_frag(struct page_frag_cache *nc,
-- unsigned int fragsz, gfp_t gfp_mask)
-+void *page_frag_alloc(struct page_frag_cache *nc,
-+ unsigned int fragsz, gfp_t gfp_mask)
- {
- unsigned int size = PAGE_SIZE;
- struct page *page;
-@@ -4001,19 +4001,19 @@ refill:
-
- return nc->va + offset;
- }
--EXPORT_SYMBOL(__alloc_page_frag);
-+EXPORT_SYMBOL(page_frag_alloc);
-
- /*
- * Frees a page fragment allocated out of either a compound or order 0 page.
- */
--void __free_page_frag(void *addr)
-+void page_frag_free(void *addr)
- {
- struct page *page = virt_to_head_page(addr);
-
- if (unlikely(put_page_testzero(page)))
- __free_pages_ok(page, compound_order(page));
- }
--EXPORT_SYMBOL(__free_page_frag);
-+EXPORT_SYMBOL(page_frag_free);
-
- static void *make_alloc_exact(unsigned long addr, unsigned int order,
- size_t size)
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -369,7 +369,7 @@ static void *__netdev_alloc_frag(unsigne
-
- local_irq_save(flags);
- nc = this_cpu_ptr(&netdev_alloc_cache);
-- data = __alloc_page_frag(nc, fragsz, gfp_mask);
-+ data = page_frag_alloc(nc, fragsz, gfp_mask);
- local_irq_restore(flags);
- return data;
- }
-@@ -393,7 +393,7 @@ static void *__napi_alloc_frag(unsigned
- {
- struct napi_alloc_cache *nc = this_cpu_ptr(&napi_alloc_cache);
-
-- return __alloc_page_frag(&nc->page, fragsz, gfp_mask);
-+ return page_frag_alloc(&nc->page, fragsz, gfp_mask);
- }
-
- void *napi_alloc_frag(unsigned int fragsz)
-@@ -445,7 +445,7 @@ struct sk_buff *__netdev_alloc_skb(struc
- local_irq_save(flags);
-
- nc = this_cpu_ptr(&netdev_alloc_cache);
-- data = __alloc_page_frag(nc, len, gfp_mask);
-+ data = page_frag_alloc(nc, len, gfp_mask);
- pfmemalloc = nc->pfmemalloc;
-
- local_irq_restore(flags);
-@@ -509,7 +509,7 @@ struct sk_buff *__napi_alloc_skb(struct
- if (sk_memalloc_socks())
- gfp_mask |= __GFP_MEMALLOC;
-
-- data = __alloc_page_frag(&nc->page, len, gfp_mask);
-+ data = page_frag_alloc(&nc->page, len, gfp_mask);
- if (unlikely(!data))
- return NULL;
-
diff --git a/target/linux/generic/backport-4.9/042-mm-rename-__page_frag-functions-to-__page_frag_cache.patch b/target/linux/generic/backport-4.9/042-mm-rename-__page_frag-functions-to-__page_frag_cache.patch
deleted file mode 100644
index 31b57167b4..0000000000
--- a/target/linux/generic/backport-4.9/042-mm-rename-__page_frag-functions-to-__page_frag_cache.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From: Alexander Duyck <alexander.h.duyck@intel.com>
-Date: Tue, 10 Jan 2017 16:58:09 -0800
-Subject: [PATCH] mm: rename __page_frag functions to __page_frag_cache, drop
- order from drain
-
-This patch does two things.
-
-First it goes through and renames the __page_frag prefixed functions to
-__page_frag_cache so that we can be clear that we are draining or
-refilling the cache, not the frags themselves.
-
-Second we drop the order parameter from __page_frag_cache_drain since we
-don't actually need to pass it since all fragments are either order 0 or
-must be a compound page.
-
-Link: http://lkml.kernel.org/r/20170104023954.13451.5678.stgit@localhost.localdomain
-Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
-
---- a/include/linux/gfp.h
-+++ b/include/linux/gfp.h
-@@ -506,8 +506,7 @@ extern void free_hot_cold_page(struct pa
- extern void free_hot_cold_page_list(struct list_head *list, bool cold);
-
- struct page_frag_cache;
--extern void __page_frag_drain(struct page *page, unsigned int order,
-- unsigned int count);
-+extern void __page_frag_cache_drain(struct page *page, unsigned int count);
- extern void *page_frag_alloc(struct page_frag_cache *nc,
- unsigned int fragsz, gfp_t gfp_mask);
- extern void page_frag_free(void *addr);
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -3914,8 +3914,8 @@ EXPORT_SYMBOL(free_pages);
- * drivers to provide a backing region of memory for use as either an
- * sk_buff->head, or to be used in the "frags" portion of skb_shared_info.
- */
--static struct page *__page_frag_refill(struct page_frag_cache *nc,
-- gfp_t gfp_mask)
-+static struct page *__page_frag_cache_refill(struct page_frag_cache *nc,
-+ gfp_t gfp_mask)
- {
- struct page *page = NULL;
- gfp_t gfp = gfp_mask;
-@@ -3935,19 +3935,20 @@ static struct page *__page_frag_refill(s
- return page;
- }
-
--void __page_frag_drain(struct page *page, unsigned int order,
-- unsigned int count)
-+void __page_frag_cache_drain(struct page *page, unsigned int count)
- {
- VM_BUG_ON_PAGE(page_ref_count(page) == 0, page);
-
- if (page_ref_sub_and_test(page, count)) {
-+ unsigned int order = compound_order(page);
-+
- if (order == 0)
- free_hot_cold_page(page, false);
- else
- __free_pages_ok(page, order);
- }
- }
--EXPORT_SYMBOL(__page_frag_drain);
-+EXPORT_SYMBOL(__page_frag_cache_drain);
-
- void *page_frag_alloc(struct page_frag_cache *nc,
- unsigned int fragsz, gfp_t gfp_mask)
-@@ -3958,7 +3959,7 @@ void *page_frag_alloc(struct page_frag_c
-
- if (unlikely(!nc->va)) {
- refill:
-- page = __page_frag_refill(nc, gfp_mask);
-+ page = __page_frag_cache_refill(nc, gfp_mask);
- if (!page)
- return NULL;
-
diff --git a/target/linux/generic/pending-4.9/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-4.9/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
index 0f6ce1f802..794280eec9 100644
--- a/target/linux/generic/pending-4.9/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
+++ b/target/linux/generic/pending-4.9/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
@@ -71,7 +71,7 @@ Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
-@@ -5924,7 +5924,7 @@ static void __ref alloc_node_mem_map(str
+@@ -5923,7 +5923,7 @@ static void __ref alloc_node_mem_map(str
mem_map = NODE_DATA(0)->node_mem_map;
#if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
if (page_to_pfn(mem_map) != pgdat->node_start_pfn)