aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--package/base-files/files/lib/functions/caldata.sh75
-rw-r--r--target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom49
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom90
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata86
-rw-r--r--target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom27
-rw-r--r--target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata101
-rw-r--r--target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata62
-rw-r--r--target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata28
-rw-r--r--target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom36
-rw-r--r--target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom36
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom37
11 files changed, 207 insertions, 420 deletions
diff --git a/package/base-files/files/lib/functions/caldata.sh b/package/base-files/files/lib/functions/caldata.sh
new file mode 100644
index 0000000000..f2a306675f
--- /dev/null
+++ b/package/base-files/files/lib/functions/caldata.sh
@@ -0,0 +1,75 @@
+# Copyright (C) 2019 OpenWrt.org
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+caldata_die() {
+ echo "caldata: " "$*"
+ exit 1
+}
+
+caldata_extract() {
+ local part=$1
+ local offset=$(($2))
+ local count=$(($3))
+ local mtd
+
+ mtd=$(find_mtd_chardev $part)
+ [ -n "$mtd" ] || caldata_die "no mtd device found for partition $part"
+
+ dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+ caldata_die "failed to extract calibration data from $mtd"
+}
+
+caldata_extract_ubi() {
+ local part=$1
+ local offset=$(($2))
+ local count=$(($3))
+ local ubidev
+ local ubi
+
+ . /lib/upgrade/nand.sh
+
+ ubidev=$(nand_find_ubi $CI_UBIPART)
+ ubi=$(nand_find_volume $ubidev $part)
+ [ -n "$ubi" ] || caldata_die "no UBI volume found for $part"
+
+ dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+ caldata_die "failed to extract calibration data from $ubi"
+}
+
+caldata_extract_reverse() {
+ local part=$1
+ local offset=$2
+ local count=$(($3))
+ local mtd
+ local reversed
+ local caldata
+
+ mtd=$(find_mtd_chardev "$part")
+ reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
+
+ for byte in $reversed; do
+ caldata="\x${byte}${caldata}"
+ done
+
+ printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
+}
+
+caldata_from_file() {
+ local source=$1
+ local offset=$(($2))
+ local count=$(($3))
+
+ dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+ caldata_die "failed to extract calibration data from $source"
+}
+
+caldata_valid() {
+ local expected="$1"
+
+ magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE)
+ [[ "$magic" == "$expected" ]]
+ return $?
+}
+
diff --git a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 272c084c99..07100b1856 100644
--- a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -2,42 +2,7 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
- echo "ath9k eeprom: " "$*"
- exit 1
-}
-
-ath9k_eeprom_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_ubi_eeprom_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local ubidev=$(nand_find_ubi $CI_UBIPART)
- local ubi
-
- ubi=$(nand_find_volume $ubidev $part)
- [ -n "$ubi" ] || \
- ath9k_eeprom_die "no UBI volume found for $part"
-
- dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $ubi"
-}
+. /lib/functions/caldata.sh
ath9k_patch_firmware_mac() {
local mac=$1
@@ -56,14 +21,14 @@ case "$FIRMWARE" in
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 0x5000 0x1000
+ caldata_extract_ubi "caldata" 0x5000 0x1000
else
- ath9k_eeprom_extract "wifi_data" 0x5000 0x1000
+ caldata_extract "wifi_data" 0x5000 0x1000
ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0xc)
fi
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
@@ -74,14 +39,14 @@ case "$FIRMWARE" in
. /lib/upgrade/nand.sh
if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 0x1000 0x1000
+ caldata_extract_ubi "caldata" 0x1000 0x1000
else
- ath9k_eeprom_extract "wifi_data" 0x1000 0x1000
+ caldata_extract "wifi_data" 0x1000 0x1000
ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0x0)
fi
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 0cdd783315..5ec13efd3f 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -2,45 +2,7 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
- echo "ath9k eeprom: " "$*"
- exit 1
-}
-
-ath9k_eeprom_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_eeprom_extract_reverse() {
- local part=$1
- local offset=$2
- local count=$(($3))
- local mtd
- local reversed
- local caldata
-
- mtd=$(find_mtd_chardev "$part")
- reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-
- for byte in $reversed; do
- caldata="\x${byte}${caldata}"
- done
-
- printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
-}
+. /lib/functions/caldata.sh
ath9k_patch_fw_mac() {
local mac=$1
@@ -83,11 +45,11 @@ case "$FIRMWARE" in
"ath9k-eeprom-ahb-18100000.wmac.bin")
case $board in
avm,fritz4020)
- ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
+ caldata_extract_reverse "urlader" 0x1541 0x440
;;
dlink,dir-825-c1|\
dlink,dir-835-a1)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_text "mac" 0x4) 0x2
;;
dlink,dir-842-c1|\
@@ -96,11 +58,11 @@ case "$FIRMWARE" in
dlink,dir-859-a1|\
nec,wg1200cr|\
wd,mynet-n750)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2
;;
engenius,ecb1750)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 0x2
;;
engenius,epg5000|\
@@ -108,39 +70,39 @@ case "$FIRMWARE" in
iodata,wn-ac1600dgr|\
iodata,wn-ac1600dgr2|\
iodata,wn-ag300dgr)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2
;;
nec,wg800hp)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 0x2
;;
qihoo,c301)
- ath9k_eeprom_extract "radiocfg" 0x1000 0x440
+ caldata_extract "radiocfg" 0x1000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
"ath9k-eeprom-pci-0000:00:00.0.bin")
case $board in
avm,fritz300e)
- ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440
+ caldata_extract_reverse "urloader" 0x1541 0x440
;;
buffalo,whr-g301n|\
buffalo,wzr-hp-g302h-a1a0|\
tplink,tl-wr841-v5|\
tplink,tl-wr941-v4)
- ath9k_eeprom_extract "art" 0x1000 0xeb8
+ caldata_extract "art" 0x1000 0xeb8
;;
buffalo,wzr-hp-g450h)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
;;
dlink,dir-825-c1|\
dlink,dir-835-a1)
- ath9k_eeprom_extract "art" 0x5000 0x440
+ caldata_extract "art" 0x5000 0x440
ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2
;;
ocedo,raccoon|\
@@ -149,7 +111,7 @@ case "$FIRMWARE" in
tplink,tl-wdr4300-v1|\
tplink,tl-wdr4900-v2|\
winchannel,wb2000)
- ath9k_eeprom_extract "art" 0x5000 0x440
+ caldata_extract "art" 0x5000 0x440
;;
netgear,wnr612-v2|\
on,n150r|\
@@ -167,24 +129,24 @@ case "$FIRMWARE" in
ubnt,bullet-m|\
ubnt,nano-m|\
ubnt,rocket-m)
- ath9k_eeprom_extract "art" 0x1000 0x1000
+ caldata_extract "art" 0x1000 0x1000
;;
pqi,air-pen)
- ath9k_eeprom_extract "art" 0x1000 0x7d2
+ caldata_extract "art" 0x1000 0x7d2
;;
ubnt,unifi)
- ath9k_eeprom_extract "art" 0x1000 0x800
+ caldata_extract "art" 0x1000 0x800
;;
wd,mynet-n750)
- ath9k_eeprom_extract "art" 0x5000 0x440
+ caldata_extract "art" 0x5000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 0x2
;;
wd,mynet-wifi-rangeextender)
- ath9k_eeprom_extract "art" 0x1000 0x1000
+ caldata_extract "art" 0x1000 0x1000
ath9k_patch_fw_mac $(nvram get wl0_hwaddr) "$mac" 0x2
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
@@ -195,14 +157,14 @@ case "$FIRMWARE" in
netgear,wndr3700v2|\
netgear,wndr3800|\
netgear,wndr3800ch)
- ath9k_eeprom_extract "art" 0x1000 0xeb8
+ caldata_extract "art" 0x1000 0xeb8
;;
dlink,dir-825-b1)
- ath9k_eeprom_extract "caldata" 0x1000 0xeb8
+ caldata_extract "caldata" 0x1000 0xeb8
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
@@ -213,14 +175,14 @@ case "$FIRMWARE" in
netgear,wndr3700v2|\
netgear,wndr3800|\
netgear,wndr3800ch)
- ath9k_eeprom_extract "art" 0x5000 0xeb8
+ caldata_extract "art" 0x5000 0xeb8
;;
dlink,dir-825-b1)
- ath9k_eeprom_extract "caldata" 0x5000 0xeb8
+ caldata_extract "caldata" 0x5000 0xeb8
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 3844481f5a..878f6443ab 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,35 +1,9 @@
#!/bin/sh
-. /lib/functions.sh
-. /lib/functions/k2t.sh
-
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_from_file() {
- local source=$1
- local offset=$(($2))
- local count=$(($3))
-
- dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
-}
+. /lib/functions/caldata.sh
+. /lib/functions/k2t.sh
ath10kcal_patch_mac() {
local mac=$1
@@ -62,10 +36,6 @@ ath10kcal_patch_mac_crc() {
}
}
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/system.sh
-
board=$(board_name)
case "$FIRMWARE" in
@@ -74,7 +44,7 @@ case "$FIRMWARE" in
comfast,cf-wr650ac-v1|\
comfast,cf-wr650ac-v2|\
yuncore,a770)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
;;
devolo,dvl1200e|\
devolo,dvl1200i|\
@@ -82,54 +52,54 @@ case "$FIRMWARE" in
devolo,dvl1750e|\
devolo,dvl1750i|\
devolo,dvl1750x)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
;;
dlink,dir-859-a1)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
;;
elecom,wrc-1750ghbk2-i)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
;;
engenius,ecb1750)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
;;
engenius,epg5000|\
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
engenius,ews511ap)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
glinet,gl-ar750|\
glinet,gl-ar750s)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
;;
glinet,gl-x750)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
;;
nec,wg800hp)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880)
;;
ocedo,koala|\
ocedo,ursus)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc)
;;
openmesh,om5p-ac-v2)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
qihoo,c301)
- ath10kcal_extract "radiocfg" 0x5000 0x844
+ caldata_extract "radiocfg" 0x5000 0x844
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
;;
tplink,archer-a7-v5|\
@@ -137,29 +107,29 @@ case "$FIRMWARE" in
tplink,archer-c7-v4|\
tplink,archer-c7-v5|\
tplink,archer-c25-v1)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
;;
tplink,archer-c5-v1|\
tplink,archer-c7-v2)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
;;
tplink,archer-d50-v1)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
;;
tplink,re350k-v1)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
;;
tplink,re355-v1|\
tplink,re450-v1)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
tplink,re450-v2)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
;;
ubnt,unifiac-lite|\
@@ -170,14 +140,14 @@ case "$FIRMWARE" in
ubnt,nanostation-ac|\
ubnt,nanostation-ac-loco|\
ubnt,unifiac-pro)
- ath10kcal_extract "EEPROM" 0x5000 0x844
+ caldata_extract "EEPROM" 0x5000 0x844
;;
esac
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
case $board in
comfast,cf-e313ac)
- ath10kcal_extract "art" 0x5000 0x2f20
+ caldata_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary art 0x6)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
@@ -187,18 +157,18 @@ case "$FIRMWARE" in
dlink,dir-842-c2|\
dlink,dir-842-c3|\
nec,wg1200cr)
- ath10kcal_extract "art" 0x5000 0x2f20
+ caldata_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
netgear,ex6400|\
netgear,ex7300)
- ath10kcal_extract "caldata" 0x5000 0x2f20
+ caldata_extract "caldata" 0x5000 0x2f20
ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc)
;;
phicomm,k2t)
- ath10kcal_extract "art" 0x5000 0x2f20
+ caldata_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac")
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
@@ -209,7 +179,7 @@ case "$FIRMWARE" in
tplink,archer-c60-v1|\
tplink,archer-c60-v2|\
tplink,archer-c6-v2)
- ath10kcal_extract "art" 0x5000 0x2f20
+ caldata_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
diff --git a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 305d5feda5..2400eb998a 100644
--- a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -1,28 +1,9 @@
#!/bin/sh
# Based on gabors ralink wisoc implementation.
-rt2x00_eeprom_die() {
- echo "rt2x00 eeprom: " "$*"
- exit 1
-}
-
-rt2x00_eeprom_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_part $part)
- [ -n "$mtd" ] || \
- rt2x00_eeprom_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
- rt2x00_eeprom_die "failed to extract from $mtd"
-}
-
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
+. /lib/functions/caldata.sh
board=$(board_name)
@@ -30,14 +11,14 @@ case "$FIRMWARE" in
"rt2x00.eeprom" )
case $board in
hg556a_c)
- rt2x00_eeprom_extract "cal_data" 0x1fe00 0x200
+ caldata_extract "cal_data" 0x1fe00 0x200
;;
hg622 |\
hg655b)
- rt2x00_eeprom_extract "cal_data" 0x0 0x200
+ caldata_extract "cal_data" 0x0 0x200
;;
*)
- rt2x00_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index dfb0a0cf76..61597ea669 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,43 +1,8 @@
#!/bin/sh
-. /lib/functions.sh
-
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
-ath10kcal_ubi_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local ubidev
- local ubi
-
- . /lib/upgrade/nand.sh
-
- ubidev=$(nand_find_ubi $CI_UBIPART)
- ubi=$(nand_find_volume $ubidev $part)
- [ -n "$ubi" ] || \
- ath10kcal_die "no UBI volume found for $part"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
- dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract from $ubi"
-}
+. /lib/functions/caldata.sh
ath10kcal_patch_mac_crc() {
local mac=$1
@@ -64,26 +29,14 @@ ath10kcal_patch_mac_crc() {
dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
}
-ath10kcal_is_caldata_valid() {
- local expected="$1"
-
- magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE)
- [[ "$magic" == "$expected" ]]
- return $?
-}
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/system.sh
-
board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:01:00.0.bin")
case "$board" in
meraki,mr33)
- ath10kcal_ubi_extract "ART" 0x9000 0x844
- ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 0x9000 0x844
+ caldata_extract_ubi "ART" 0x9000 0x844
+ caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
;;
esac
@@ -91,7 +44,7 @@ case "$FIRMWARE" in
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case "$board" in
asus,map-ac2200)
- ath10kcal_ubi_extract "Factory" 0x9000 0x2f20
+ caldata_extract_ubi "Factory" 0x9000 0x2f20
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
@@ -104,12 +57,12 @@ case "$FIRMWARE" in
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
linksys,ea8300)
- ath10kcal_extract "ART" 0x9000 0x2f20
+ caldata_extract "ART" 0x9000 0x2f20
# OEM assigns 4 sequential MACs
ath10kcal_patch_mac_crc $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
;;
openmesh,a62)
- ath10kcal_extract "0:ART" 0x9000 0x2f20
+ caldata_extract "0:ART" 0x9000 0x2f20
;;
esac
;;
@@ -120,14 +73,14 @@ case "$FIRMWARE" in
glinet,gl-b1300 |\
linksys,ea6350v3 |\
qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 0x1000 0x2f20
+ caldata_extract "ART" 0x1000 0x2f20
;;
asus,map-ac2200)
- ath10kcal_ubi_extract "Factory" 0x1000 0x2f20
+ caldata_extract_ubi "Factory" 0x1000 0x2f20
;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
- ath10kcal_ubi_extract "Factory" 0x1000 0x2f20
+ caldata_extract_ubi "Factory" 0x1000 0x2f20
;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
@@ -147,29 +100,29 @@ case "$FIRMWARE" in
openmesh,a62 |\
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
- ath10kcal_extract "0:ART" 0x1000 0x2f20
+ caldata_extract "0:ART" 0x1000 0x2f20
;;
engenius,ens620ext)
- ath10kcal_extract "ART" 0x1000 0x2f20
+ caldata_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
;;
linksys,ea8300)
- ath10kcal_extract "ART" 0x1000 0x2f20
+ caldata_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
;;
meraki,mr33)
- ath10kcal_ubi_extract "ART" 0x1000 0x2f20
- ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x1000 0x2f20
+ caldata_extract_ubi "ART" 0x1000 0x2f20
+ caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
- ath10kcal_extract "ART" 0x1000 0x2f20
+ caldata_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0x0)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
- ath10kcal_extract "ART" 0x1000 0x2f20
+ caldata_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
esac
@@ -181,14 +134,14 @@ case "$FIRMWARE" in
glinet,gl-b1300 |\
linksys,ea6350v3 |\
qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 0x5000 0x2f20
+ caldata_extract "ART" 0x5000 0x2f20
;;
asus,map-ac2200)
- ath10kcal_ubi_extract "Factory" 0x5000 0x2f20
+ caldata_extract_ubi "Factory" 0x5000 0x2f20
;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
- ath10kcal_ubi_extract "Factory" 0x5000 0x2f20
+ caldata_extract_ubi "Factory" 0x5000 0x2f20
;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
@@ -208,29 +161,29 @@ case "$FIRMWARE" in
openmesh,a62 |\
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
- ath10kcal_extract "0:ART" 0x5000 0x2f20
+ caldata_extract "0:ART" 0x5000 0x2f20
;;
engenius,ens620ext)
- ath10kcal_extract "ART" 0x5000 0x2f20
+ caldata_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
;;
linksys,ea8300)
- ath10kcal_extract "ART" 0x5000 0x2f20
+ caldata_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
;;
meraki,mr33)
- ath10kcal_ubi_extract "ART" 0x5000 0x2f20
- ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x5000 0x2f20
+ caldata_extract_ubi "ART" 0x5000 0x2f20
+ caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
- ath10kcal_extract "ART" 0x5000 0x2f20
+ caldata_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0xc)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
- ath10kcal_extract "ART" 0x5000 0x2f20
+ caldata_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
esac
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c0fb1db16d..12b76ec33f 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,34 +1,8 @@
#!/bin/sh
-. /lib/functions.sh
-
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_from_file() {
- local source=$1
- local offset=$(($2))
- local count=$(($3))
-
- dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
- dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
-}
+. /lib/functions/caldata.sh
ath10kcal_patch_mac_crc() {
local mac=$1
@@ -55,43 +29,39 @@ ath10kcal_patch_mac_crc() {
dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
}
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/system.sh
-
board=$(board_name)
case "$FIRMWARE" in
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case $board in
buffalo,wxr-2533dhp)
- ath10kcal_extract "ART" 0x1000 0x2f20
+ caldata_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x1e)
;;
linksys,ea8500)
- ath10kcal_extract "art" 0x1000 0x2f20
+ caldata_extract "art" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1)
;;
nec,wg2600hp)
- ath10kcal_extract "ART" 0x1000 0x2f20
+ caldata_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 0xc) +1)
;;
netgear,d7800 |\
netgear,r7500v2 |\
netgear,r7800)
- ath10kcal_extract "art" 0x1000 0x2f20
+ caldata_extract "art" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +1)
;;
tplink,c2600)
- ath10kcal_extract "radio" 0x1000 0x2f20
+ caldata_extract "radio" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1)
;;
tplink,vr2600v)
- ath10kcal_extract "ART" 0x1000 0x2f20
+ caldata_extract "ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x0) -1)
;;
zyxel,nbg6817)
- ath10kcal_extract "0:ART" 0x1000 0x2f20
+ caldata_extract "0:ART" 0x1000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
;;
esac
@@ -99,33 +69,33 @@ case "$FIRMWARE" in
"ath10k/pre-cal-pci-0001:01:00.0.bin")
case $board in
buffalo,wxr-2533dhp)
- ath10kcal_extract "ART" 0x5000 0x2f20
+ caldata_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x18)
;;
linksys,ea8500)
- ath10kcal_extract "art" 0x5000 0x2f20
+ caldata_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2)
;;
nec,wg2600hp)
- ath10kcal_extract "ART" 0x5000 0x2f20
+ caldata_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary PRODUCTDATA 0xc)
;;
netgear,d7800 |\
netgear,r7500v2 |\
netgear,r7800)
- ath10kcal_extract "art" 0x5000 0x2f20
+ caldata_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +2)
;;
tplink,c2600)
- ath10kcal_extract "radio" 0x5000 0x2f20
+ caldata_extract "radio" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x8)
;;
tplink,vr2600v)
- ath10kcal_extract "ART" 0x5000 0x2f20
+ caldata_extract "ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x0)
;;
zyxel,nbg6817)
- ath10kcal_extract "0:ART" 0x5000 0x2f20
+ caldata_extract "0:ART" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
;;
esac
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 6d7682a7f3..5b03fb0e01 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -3,29 +3,7 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
-. /lib/upgrade/nand.sh
-
-ath10k_caldata_die() {
- echo "ath10k caldata: " "$*"
- exit 1
-}
-
-ath10k_caldata_extract_ubi() {
- local part=$1
- local offset=$2
- local count=$3
- local ubidev=$(nand_find_ubi $CI_UBIPART)
- local ubi
-
- ubi=$(nand_find_volume $ubidev $part)
- [ -n "$ubi" ] || \
- ath10k_caldata_die "no UBI volume found for $part"
-
- dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
- ath10k_caldata_die "failed to extract from $ubi"
-}
+. /lib/functions/caldata.sh
ath10k_caldata_set_macaddr() {
local macaddr=$1
@@ -39,11 +17,11 @@ case "$FIRMWARE" in
board=$(board_name)
case $board in
bt,homehub-v5a)
- ath10k_caldata_extract_ubi "caldata" 20480 2116
+ caldata_extract_ubi "caldata" 0x5000 0x844
ath10k_caldata_set_macaddr $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +3)
;;
*)
- ath10k_caldata_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index 2c4a5a1799..20160cb32b 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -3,15 +3,9 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
+. /lib/functions/caldata.sh
. /lib/upgrade/nand.sh
-ath9k_eeprom_die() {
- echo "ath9k eeprom: $*"
- exit 1
-}
-
ath9k_eeprom_extract_raw() {
local source=$1
local offset=$(($2))
@@ -28,25 +22,7 @@ ath9k_eeprom_extract_raw() {
fi
dd if=$source of=/lib/firmware/$FIRMWARE bs=$bs skip=$offset count=$size $conv 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_eeprom_extract_reverse() {
- local part=$1
- local offset=$2
- local count=$(($3))
- local mtd
- local reversed
- local caldata
-
- mtd=$(find_mtd_chardev "$part")
- reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-
- for byte in $reversed; do
- caldata="\x${byte}${caldata}"
- done
-
- printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
+ caldata_die "failed to extract from $mtd"
}
ath9k_eeprom_extract() {
@@ -57,7 +33,7 @@ ath9k_eeprom_extract() {
mtd=$(find_mtd_chardev $part)
[ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
+ caldata_die "no mtd device found for partition $part"
ath9k_eeprom_extract_raw $mtd $offset $swap
}
@@ -71,7 +47,7 @@ ath9k_ubi_eeprom_extract() {
ubi=$(nand_find_volume $ubidev $part)
[ -n "$ubi" ] || \
- ath9k_eeprom_die "no UBI volume found for $part"
+ caldata_die "no UBI volume found for $part"
ath9k_eeprom_extract_raw /dev/$ubi $offset $swap
}
@@ -143,7 +119,7 @@ case "$FIRMWARE" in
avm,fritz3370-rev2-hynix|\
avm,fritz3370-rev2-micron|\
avm,fritz7362sl)
- ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
+ caldata_extract_reverse "urlader" 0x1541 0x440
;;
avm,fritz7312|avm,fritz7320|avm,fritz7360sl)
ath9k_eeprom_extract "urlader" 0x985 0
@@ -155,7 +131,7 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "boardconfig" 0x21000 0
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
diff --git a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index dc66226d7b..bcde02593a 100644
--- a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -1,25 +1,8 @@
#!/bin/sh
-FW_FILE="/lib/firmware/$FIRMWARE"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
-ath9k_eeprom_die() {
- echo "ath9k eeprom: " "$*" >&2
- exit 1
-}
-
-ath9k_eeprom_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
-
- dd if=$mtd bs=$offset skip=1 count=1 2>/dev/null | dd of=$FW_FILE bs=$count count=1 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $mtd"
-}
+. /lib/functions/caldata.sh
tpl_set_wireless_mac()
{
@@ -29,25 +12,20 @@ tpl_set_wireless_mac()
mac=$(mtd_get_mac_binary u-boot 0x4fc00)
mac=$(macaddr_add $mac $offset)
- macaddr_2bin $mac | dd bs=1 count=6 seek=2 conv=notrunc of=$FW_FILE 2>/dev/null
+ macaddr_2bin $mac | dd bs=1 count=6 seek=2 conv=notrunc of=/lib/firmware/$FIRMWARE 2>/dev/null
}
-[ -e $FW_FILE ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
board=$(board_name)
case "$FIRMWARE" in
"pci_wmac0.eeprom")
case $board in
tplink,tl-wdr4900-v1)
- ath9k_eeprom_extract "caldata" 0x1000 0x800
+ caldata_extract "caldata" 0x1000 0x800
tpl_set_wireless_mac 0
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
@@ -55,11 +33,11 @@ case "$FIRMWARE" in
"pci_wmac1.eeprom")
case $board in
tplink,tl-wdr4900-v1)
- ath9k_eeprom_extract "caldata" 0x5000 0x800
+ caldata_extract "caldata" 0x5000 0x800
tpl_set_wireless_mac -1
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 7b98936ec3..ec70d86dac 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -1,23 +1,8 @@
#!/bin/sh
-rt2x00_eeprom_die() {
- echo "rt2x00 eeprom: " "$*"
- exit 1
-}
-
-rt2x00_eeprom_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_part $part)
- [ -n "$mtd" ] || \
- rt2x00_eeprom_die "no mtd device found for partition $part"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- rt2x00_eeprom_die "failed to extract from $mtd"
-}
+. /lib/functions/caldata.sh
jboot_eeprom_extract() {
local part=$1
@@ -26,29 +11,23 @@ jboot_eeprom_extract() {
mtd=$(find_mtd_part $part)
[ -n "$mtd" ] || \
- rt2x00_eeprom_die "no mtd device found for partition $part"
+ caldata_die "no mtd device found for partition $part"
jboot_config_read -i $mtd -o $offset -e /lib/firmware/$FIRMWARE 2>/dev/null || \
- rt2x00_eeprom_die "failed to extract from $mtd"
+ caldata_die "failed to extract from $mtd"
}
rt2x00_eeprom_set_macaddr() {
local macaddr=$1
[ -n "$macaddr" ] || \
- rt2x00_eeprom_die "invalid wlan mac address"
+ caldata_die "invalid wlan mac address"
macaddr_2bin $macaddr | dd of=/lib/firmware/$FIRMWARE \
conv=notrunc oflag=seek_bytes bs=6 seek=4 count=1 2>/dev/null || \
- rt2x00_eeprom_die "failed to write mac address to eeprom file"
+ caldata_die "failed to write mac address to eeprom file"
}
-FW="/lib/firmware/$FIRMWARE"
-[ -e "$FW" ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
board=$(board_name)
case "$FIRMWARE" in
@@ -68,11 +47,11 @@ case "$FIRMWARE" in
;;
dovado,tiny-ac)
wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR)
- rt2x00_eeprom_extract "factory" 0x0 0x200
+ caldata_extract "factory" 0x0 0x200
rt2x00_eeprom_set_macaddr $wifi_mac
;;
*)
- rt2x00_eeprom_die "Please define mtd-eeprom in $board DTS file!"
+ caldata_die "Please define mtd-eeprom in $board DTS file!"
;;
esac
;;