aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts20
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts20
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts20
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts20
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts20
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts20
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts24
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts20
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi24
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts20
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts16
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts8
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts16
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi66
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts20
-rw-r--r--target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts20
16 files changed, 64 insertions, 290 deletions
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 381fcee5ea..987731b04f 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -137,27 +137,11 @@
status = "okay";
};
- phy@100f8800 { /* USB3 port 1 HS phy */
+ usb3_0: usb3@110f8800 {
status = "okay";
};
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "okay";
- };
-
- usb30@0 {
- status = "okay";
- };
-
- usb30@1 {
+ usb3_1: usb3@100f8800 {
status = "okay";
};
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
index 1dad12cfd6..edfa18d73a 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
@@ -140,27 +140,11 @@
status = "okay";
};
- phy@100f8800 { /* USB3 port 1 HS phy */
+ usb3_0: usb3@110f8800 {
status = "okay";
};
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "okay";
- };
-
- usb30@0 {
- status = "okay";
- };
-
- usb30@1 {
+ usb3_1: usb3@100f8800 {
status = "okay";
};
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
index de80a11bdf..865e27ff73 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
@@ -315,30 +315,14 @@
};
};
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "okay";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "okay";
- };
-
- usb30@0 {
+ usb3_0: usb3@110f8800 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pin>;
pinctrl-names = "default";
};
- usb30@1 {
+ usb3_1: usb3@100f8800 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pin>;
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
index fc7aea0dca..9e5ff273a4 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
@@ -152,30 +152,14 @@
status = "okay";
};
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "okay";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "okay";
- };
-
- usb30@0 {
+ usb3_0: usb3@110f8800 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
- usb30@1 {
+ usb3_1: usb3@100f8800 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
index a873bf94f5..5da523a728 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -123,27 +123,11 @@
status = "okay";
};
- phy@100f8800 { /* USB3 port 1 HS phy */
+ usb3_0: usb3@110f8800 {
status = "okay";
};
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "okay";
- };
-
- usb30@0 {
- status = "okay";
- };
-
- usb30@1 {
+ usb3_1: usb3@100f8800 {
status = "okay";
};
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
index 7fe45a8798..8d6c981d1d 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
@@ -131,27 +131,11 @@
status = "okay";
};
- phy@100f8800 { /* USB3 port 1 HS phy */
+ usb3_0: usb3@110f8800 {
status = "okay";
};
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "okay";
- };
-
- usb30@0 {
- status = "okay";
- };
-
- usb30@1 {
+ usb3_1: usb3@100f8800 {
status = "okay";
};
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
index 9755567560..6c51d95072 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
@@ -132,32 +132,12 @@
status = "okay";
};
- phy@100f8800 { /* USB3 port 1 HS phy */
- clocks = <&gcc USB30_0_UTMI_CLK>;
- status = "okay";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- clocks = <&gcc USB30_0_MASTER_CLK>;
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- clocks = <&gcc USB30_1_UTMI_CLK>;
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- clocks = <&gcc USB30_1_MASTER_CLK>;
- status = "okay";
- };
-
- usb30@0 {
+ usb3_0: usb3@110f8800 {
clocks = <&gcc USB30_1_MASTER_CLK>;
status = "okay";
};
- usb30@1 {
+ usb3_1: usb3@100f8800 {
clocks = <&gcc USB30_0_MASTER_CLK>;
status = "okay";
};
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
index 471e02c5f1..7445d92f61 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
@@ -156,30 +156,14 @@
status = "okay";
};
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "okay";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "okay";
- };
-
- usb30@0 {
+ usb3_0: usb3@110f8800 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
- usb30@1 {
+ usb3_1: usb3@100f8800 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
index 8c522a897d..dd272c7fc7 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
@@ -3,18 +3,6 @@
/ {
soc: soc {
- ss_phy_0: phy@110f8830 {
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <0xa0>;
- };
-
- ss_phy_1: phy@100f8830 {
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <0xa0>;
- };
-
pcie0: pci@1b500000 {
phy-tx0-term-offset = <0>;
};
@@ -28,3 +16,15 @@
};
};
};
+
+&ss_phy_0 {
+ rx_eq = <2>;
+ tx_deamp_3_5db = <32>;
+ mpll = <0xa0>;
+};
+
+&ss_phy_1 {
+ rx_eq = <2>;
+ tx_deamp_3_5db = <32>;
+ mpll = <0xa0>;
+};
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
index 2510ca1081..485a4b90e3 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
@@ -233,27 +233,11 @@
};
};
- phy@100f8800 { /* USB3 port 1 HS phy */
+ usb3_0: usb3@110f8800 {
status = "okay";
};
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "okay";
- };
-
- usb30@0 {
- status = "okay";
- };
-
- usb30@1 {
+ usb3_1: usb3@100f8800 {
status = "okay";
};
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
index e2a481723b..f0c377aa30 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
@@ -321,22 +321,6 @@
};
};
-&hs_phy_0 { /* USB3 port 0 HS phy */
- status = "okay";
-};
-
-&ss_phy_0 { /* USB3 port 0 SS phy */
- status = "okay";
-};
-
-&hs_phy_1 { /* USB3 port 1 HS phy */
- status = "okay";
-};
-
-&ss_phy_1 { /* USB3 port 1 SS phy */
- status = "okay";
-};
-
&usb3_0 {
status = "okay";
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
index 14258d594e..e2c87f33e1 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
@@ -383,14 +383,6 @@
};
};
-&hs_phy_0 { /* USB3 port 0 HS phy */
- status = "okay";
-};
-
-&hs_phy_1 { /* USB3 port 1 HS phy */
- status = "okay";
-};
-
&ss_phy_0 { /* USB3 port 0 SS phy */
status = "okay";
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
index 2f511e498e..12cfa3b0fc 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
@@ -369,22 +369,6 @@
};
};
-&hs_phy_0 { /* USB3 port 0 HS phy */
- status = "okay";
-};
-
-&ss_phy_0 { /* USB3 port 0 SS phy */
- status = "okay";
-};
-
-&hs_phy_1 { /* USB3 port 1 HS phy */
- status = "okay";
-};
-
-&ss_phy_1 { /* USB3 port 1 SS phy */
- status = "okay";
-};
-
&usb3_0 {
status = "okay";
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 8387460d27..54869de44f 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -920,64 +920,41 @@
reg = <0x01200600 0x100>;
};
- hs_phy_1: phy@100f8800 {
+ hs_phy_0: hs_phy_0 {
compatible = "qcom,dwc3-hs-usb-phy";
- reg = <0x100f8800 0x30>;
- clocks = <&gcc USB30_1_UTMI_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- ss_phy_1: phy@100f8830 {
- compatible = "qcom,dwc3-ss-usb-phy";
- reg = <0x100f8830 0x30>;
- clocks = <&gcc USB30_1_MASTER_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- hs_phy_0: phy@110f8800 {
- compatible = "qcom,dwc3-hs-usb-phy";
- reg = <0x110f8800 0x30>;
+ regmap = <&usb3_0>;
clocks = <&gcc USB30_0_UTMI_CLK>;
clock-names = "ref";
#phy-cells = <0>;
-
- status = "disabled";
};
- ss_phy_0: phy@110f8830 {
+ ss_phy_0: ss_phy_0 {
compatible = "qcom,dwc3-ss-usb-phy";
- reg = <0x110f8830 0x30>;
+ regmap = <&usb3_0>;
clocks = <&gcc USB30_0_MASTER_CLK>;
clock-names = "ref";
#phy-cells = <0>;
-
- status = "disabled";
};
- usb3_0: usb30@0 {
- compatible = "qcom,dwc3";
+ usb3_0: usb3@110f8800 {
+ compatible = "qcom,dwc3", "syscon";
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0x110f8800 0x8000>;
clocks = <&gcc USB30_0_MASTER_CLK>;
clock-names = "core";
ranges;
resets = <&gcc USB30_0_MASTER_RESET>;
- reset-names = "usb30_0_mstr_rst";
+ reset-names = "master";
status = "disabled";
dwc3_0: dwc3@11000000 {
compatible = "snps,dwc3";
reg = <0x11000000 0xcd00>;
- interrupts = <0 110 0x4>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hs_phy_0>, <&ss_phy_0>;
phy-names = "usb2-phy", "usb3-phy";
dr_mode = "host";
@@ -985,24 +962,41 @@
};
};
- usb3_1: usb30@1 {
- compatible = "qcom,dwc3";
+ hs_phy_1: hs_phy_1 {
+ compatible = "qcom,dwc3-hs-usb-phy";
+ regmap = <&usb3_1>;
+ clocks = <&gcc USB30_1_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_1: ss_phy_1 {
+ compatible = "qcom,dwc3-ss-usb-phy";
+ regmap = <&usb3_1>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ usb3_1: usb3@100f8800 {
+ compatible = "qcom,dwc3", "syscon";
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0x100f8800 0x8000>;
clocks = <&gcc USB30_1_MASTER_CLK>;
clock-names = "core";
ranges;
resets = <&gcc USB30_1_MASTER_RESET>;
- reset-names = "usb30_1_mstr_rst";
+ reset-names = "master";
status = "disabled";
dwc3_1: dwc3@10000000 {
compatible = "snps,dwc3";
reg = <0x10000000 0xcd00>;
- interrupts = <0 205 0x4>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hs_phy_1>, <&ss_phy_1>;
phy-names = "usb2-phy", "usb3-phy";
dr_mode = "host";
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
index 954d3fe853..6576d74154 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
@@ -189,30 +189,14 @@
};
};
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "okay";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "okay";
- };
-
- usb30@0 {
+ usb3_0: usb3@110f8800 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
- usb30@1 {
+ usb3_1: usb3@100f8800 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
index 304f948296..82a4f348ed 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -225,30 +225,14 @@
status = "okay";
};
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "okay";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "okay";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "okay";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "okay";
- };
-
- usb30@0 {
+ usb3_0: usb3@110f8800 {
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
- usb30@1 {
+ usb3_1: usb3@100f8800 {
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;