aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds2
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.41
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt9
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c130
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/generic.mk8
10 files changed, 131 insertions, 26 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 2cf72d61d3..383695ca87 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -58,6 +58,7 @@ ap147-010)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
ap90q|\
+cpe830|\
cpe870|\
dr531)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
@@ -67,6 +68,7 @@ dr531)
ap90q)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
+ cpe830|\
cpe870)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
ucidef_set_rssimon "wlan0" "200000" "1"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index e619749609..b18a096b59 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -48,6 +48,7 @@ get_status_led() {
status_led="$board:green:power"
;;
ap90q|\
+ cpe830|\
cpe870|\
gl-inet)
status_led="$board:green:lan"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 0d4c1e0a49..37af9d44d4 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -526,6 +526,9 @@ ar71xx_board_detect() {
name="cpe510"
tplink_pharos_board_detect
;;
+ *CPE830)
+ name="cpe830"
+ ;;
*CPE870)
name="cpe870"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 66f630884f..887a0f0c1e 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -188,6 +188,7 @@ platform_check_image() {
cf-e380ac-v2|\
cf-e520n|\
cf-e530n|\
+ cpe830|\
cpe870|\
dgl-5500-a1|\
dhp-1565-a1|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 794e7f809c..c6a757a7eb 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -69,6 +69,7 @@ CONFIG_ATH79_MACH_CF_E380AC_V2=y
CONFIG_ATH79_MACH_CF_E520N=y
CONFIG_ATH79_MACH_CF_E530N=y
CONFIG_ATH79_MACH_CPE510=y
+CONFIG_ATH79_MACH_CPE830=y
CONFIG_ATH79_MACH_CPE870=y
CONFIG_ATH79_MACH_CR3000=y
CONFIG_ATH79_MACH_CR5000=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 6daa093a01..001edbeb17 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1211,6 +1211,15 @@ config ATH79_MACH_CPE510
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_CPE830
+ bool "YunCore CPE830 support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_CPE870
bool "YunCore CPE870 support"
select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index b718d6bfd3..ac2dbbb23f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_ATH79_MACH_CF_E380AC_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
+obj-$(CONFIG_ATH79_MACH_CPE830) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_CPE870) += mach-cpe870.o
obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o
obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c
index 35e578122e..2e9d34d658 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c
@@ -1,5 +1,7 @@
/*
- * YunCore AP90Q board support
+ * Support for YunCore boards:
+ * - AP90Q
+ * - CPE830
*
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
*
@@ -23,6 +25,7 @@
#include "dev-wmac.h"
#include "machtypes.h"
+/* AP90Q */
#define AP90Q_GPIO_LED_WAN 4
#define AP90Q_GPIO_LED_WLAN 12
#define AP90Q_GPIO_LED_LAN 16
@@ -61,40 +64,62 @@ static struct gpio_keys_button ap90q_gpio_keys[] __initdata = {
},
};
-static void __init ap90q_gpio_setup(void)
-{
- /* For LED on GPIO4 */
- ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true);
- ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true);
- ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true);
-
- /* Mute LEDs on boot */
- gpio_set_value(AP90Q_GPIO_LED_LAN, 1);
- gpio_set_value(AP90Q_GPIO_LED_WAN, 1);
-
- ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0);
- ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0);
- ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0);
+/* CPE830 */
+#define CPE830_GPIO_LED_LINK4 0
+#define CPE830_GPIO_LED_LINK1 1
+#define CPE830_GPIO_LED_LINK2 2
+#define CPE830_GPIO_LED_LINK3 3
+#define CPE830_GPIO_LED_WAN 4
+#define CPE830_GPIO_LED_WLAN 12
+#define CPE830_GPIO_LED_LAN 16
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio),
- ap90q_leds_gpio);
+#define CPE830_GPIO_BTN_RESET 17
- ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap90q_gpio_keys),
- ap90q_gpio_keys);
-}
+static struct gpio_led cpe830_leds_gpio[] __initdata = {
+ {
+ .name = "cpe830:green:lan",
+ .gpio = CPE830_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe830:green:wan",
+ .gpio = CPE830_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe830:green:wlan",
+ .gpio = CPE830_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe830:green:link1",
+ .gpio = CPE830_GPIO_LED_LINK1,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe830:green:link2",
+ .gpio = CPE830_GPIO_LED_LINK2,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe830:green:link3",
+ .gpio = CPE830_GPIO_LED_LINK3,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe830:green:link4",
+ .gpio = CPE830_GPIO_LED_LINK4,
+ .active_low = 1,
+ },
+};
-static void __init ap90q_setup(void)
+static void __init ap90q_cpe830_common_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
- ap90q_gpio_setup();
-
ath79_setup_ar933x_phy4_switch(false, false);
ath79_register_mdio(0, 0x0);
@@ -118,6 +143,59 @@ static void __init ap90q_setup(void)
ath79_register_eth(0);
ath79_register_wmac(art, NULL);
+
+ /* For LED on GPIO4 */
+ ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true);
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true);
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true);
+
+ /* Mute LEDs on boot */
+ gpio_set_value(AP90Q_GPIO_LED_LAN, 1);
+ gpio_set_value(AP90Q_GPIO_LED_WAN, 1);
+
+ ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0);
+ ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0);
+ ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0);
+
+ ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap90q_gpio_keys),
+ ap90q_gpio_keys);
+}
+
+static void __init ap90q_setup(void)
+{
+ ap90q_cpe830_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio),
+ ap90q_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP90Q", ap90q_setup);
+
+static void __init cpe830_setup(void)
+{
+ ap90q_cpe830_common_setup();
+
+ ath79_gpio_direction_select(CPE830_GPIO_LED_LINK1, true);
+ ath79_gpio_direction_select(CPE830_GPIO_LED_LINK2, true);
+ ath79_gpio_direction_select(CPE830_GPIO_LED_LINK3, true);
+ ath79_gpio_direction_select(CPE830_GPIO_LED_LINK4, true);
+
+ /* Mute LEDs on boot */
+ gpio_set_value(CPE830_GPIO_LED_LINK1, 1);
+ gpio_set_value(CPE830_GPIO_LED_LINK2, 1);
+ gpio_set_value(CPE830_GPIO_LED_LINK3, 1);
+ gpio_set_value(CPE830_GPIO_LED_LINK4, 1);
+
+ ath79_gpio_output_select(CPE830_GPIO_LED_LINK1, 0);
+ ath79_gpio_output_select(CPE830_GPIO_LED_LINK2, 0);
+ ath79_gpio_output_select(CPE830_GPIO_LED_LINK3, 0);
+ ath79_gpio_output_select(CPE830_GPIO_LED_LINK4, 0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe830_leds_gpio),
+ cpe830_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_CPE830, "CPE830", "YunCore CPE830", cpe830_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 50ecff46f5..9a8da22f65 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -61,6 +61,7 @@ enum ath79_mach_type {
ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
ATH79_MACH_CPE210, /* TP-LINK CPE210 */
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
+ ATH79_MACH_CPE830, /* YunCore CPE830 */
ATH79_MACH_CPE870, /* YunCore CPE870 */
ATH79_MACH_CR3000, /* PowerCloud CR3000 */
ATH79_MACH_CR5000, /* PowerCloud CR5000 */
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 0b8a216a25..331509a15a 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -80,6 +80,14 @@ define Device/cf-e530n
endef
TARGET_DEVICES += cf-e530n
+define Device/cpe830
+ $(Device/ap90q)
+ DEVICE_TITLE := YunCore CPE830
+ DEVICE_PACKAGES := rssileds
+ BOARDNAME = CPE830
+endef
+TARGET_DEVICES += cpe830
+
define Device/cpe870
DEVICE_TITLE := YunCore CPE870
DEVICE_PACKAGES := rssileds