aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/apm821xx/base-files/lib/preinit/79_move_config4
-rwxr-xr-xtarget/linux/apm821xx/base-files/lib/upgrade/merakinand.sh2
-rw-r--r--target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh4
-rwxr-xr-xtarget/linux/bcm53xx/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/bcm53xx/base-files/etc/board.d/02_network2
-rwxr-xr-xtarget/linux/brcm47xx/base-files/etc/board.d/01_detect2
-rw-r--r--target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh2
-rwxr-xr-xtarget/linux/mediatek/base-files/lib/upgrade/platform.sh7
-rwxr-xr-xtarget/linux/octeon/base-files/etc/board.d/01_network2
-rw-r--r--target/linux/octeon/base-files/lib/preinit/79_move_config4
-rwxr-xr-xtarget/linux/octeon/base-files/lib/upgrade/platform.sh8
-rw-r--r--target/linux/omap24xx/base-files/etc/hotplug.d/firmware/10-bme-pmm-image4
-rw-r--r--target/linux/omap24xx/base-files/etc/hotplug.d/firmware/20-p54spi-eeprom4
-rw-r--r--target/linux/orion/base-files/etc/hotplug.d/usb/10-usb4
-rw-r--r--target/linux/orion/generic/base-files/etc/uci-defaults/09_hardware4
-rw-r--r--target/linux/orion/generic/base-files/lib/upgrade/platform.sh2
-rw-r--r--target/linux/rb532/base-files/lib/upgrade/platform.sh4
-rwxr-xr-xtarget/linux/x86/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/x86/base-files/etc/board.d/02_network4
-rwxr-xr-xtarget/linux/zynq/base-files/etc/board.d/02_network2
20 files changed, 35 insertions, 38 deletions
diff --git a/target/linux/apm821xx/base-files/lib/preinit/79_move_config b/target/linux/apm821xx/base-files/lib/preinit/79_move_config
index f45619fdbd..3ca8b0a71c 100644
--- a/target/linux/apm821xx/base-files/lib/preinit/79_move_config
+++ b/target/linux/apm821xx/base-files/lib/preinit/79_move_config
@@ -3,7 +3,9 @@
BOOTPART=/dev/sda1
move_config() {
- grep -q 'MyBook Live' /proc/cpuinfo || return
+ . /lib/functions.sh
+
+ [ "$(board_name)" = "mbl" ] || return
if [ -b $BOOTPART ]; then
mkdir -p /boot
mount -t ext4 -o rw,noatime $BOOTPART /boot
diff --git a/target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh b/target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh
index f025082e76..fb961b8945 100755
--- a/target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh
+++ b/target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh
@@ -52,7 +52,7 @@ merakinand_do_platform_check() {
merakinand_do_upgrade() {
local tar_file="$1"
- local board_name="$(cat /tmp/sysinfo/board_name)"
+ local board_name="$(board_name)"
# Do we need to do any platform tweaks?
case "$board_name" in
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh b/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh
index 78cde20a13..dfc57b23f5 100644
--- a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh
@@ -51,7 +51,7 @@ merakinand_copy_caldata() {
local cal_src=$1
local cal_dst=$2
local ubidev="$(nand_find_ubi $CI_UBIPART)"
- local board_name="$(cat /tmp/sysinfo/board_name)"
+ local board_name="$(board_name)"
local rootfs_size="$(ubinfo /dev/ubi0 -N rootfs_data | grep "Size" | awk '{ print $6 }')"
# Setup partitions using board name, in case of future platforms
@@ -143,7 +143,7 @@ merakinand_do_platform_check() {
merakinand_do_upgrade() {
local tar_file="$1"
- local board_name="$(cat /tmp/sysinfo/board_name)"
+ local board_name="$(board_name)"
# Do we need to do any platform tweaks?
case "$board_name" in
diff --git a/target/linux/bcm53xx/base-files/etc/board.d/01_leds b/target/linux/bcm53xx/base-files/etc/board.d/01_leds
index ebfe363fc1..80f799d9d7 100755
--- a/target/linux/bcm53xx/base-files/etc/board.d/01_leds
+++ b/target/linux/bcm53xx/base-files/etc/board.d/01_leds
@@ -4,9 +4,7 @@
board_config_update
-board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1)
-
-case "$board" in
+case "$(board_name)" in
netgear,r8000)
ucidef_set_led_usbport "usb2" "USB 2.0" "bcm53xx:white:usb2" "usb1-port2" "usb2-port2"
ucidef_set_led_usbport "usb3" "USB 3.0" "bcm53xx:white:usb3" "usb1-port1" "usb2-port1" "usb4-port1"
diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network
index 89bd544950..dc17af4891 100755
--- a/target/linux/bcm53xx/base-files/etc/board.d/02_network
+++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network
@@ -8,7 +8,7 @@
board_config_update
-board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1)
+board=$(board_name)
case "$board" in
tenda,ac9)
diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_detect b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
index 357cc7f224..f1022dc13a 100755
--- a/target/linux/brcm47xx/base-files/etc/board.d/01_detect
+++ b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
@@ -175,7 +175,7 @@ detect_by_model() {
}
-model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)"
+model="$(board_name)"
boardtype="$(nvram get boardtype)"
boardnum="$(nvram get boardnum)"
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
index fc48cb1d02..166bc052c5 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
@@ -68,7 +68,7 @@ zyxel_do_flash() {
zyxel_do_upgrade() {
local tar_file="$1"
- local board=$(cat /tmp/sysinfo/board_name)
+ local board=$(board_name)
local rootfs="$(zyxel_get_rootfs)"
local kernel=
diff --git a/target/linux/mediatek/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/base-files/lib/upgrade/platform.sh
index 9a844bc7e1..7e936c4dad 100755
--- a/target/linux/mediatek/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/base-files/lib/upgrade/platform.sh
@@ -4,7 +4,7 @@
platform_do_upgrade() {
local tar_file="$1"
- local board="$(cat /tmp/sysinfo/board_name)"
+ local board="$(board_name)"
echo "flashing kernel"
tar xf $tar_file sysupgrade-$board/kernel -O | mtd write - kernel
@@ -17,7 +17,7 @@ platform_do_upgrade() {
platform_check_image() {
local tar_file="$1"
- local board=$(cat /tmp/sysinfo/board_name)
+ local board=$(board_name)
case "$board" in
mediatek,mt7623-rfb-nand-ephy |\
@@ -45,8 +45,7 @@ platform_check_image() {
}
platform_pre_upgrade() {
- local board=$(cat /tmp/sysinfo/board_name)
- case "$board" in
+ case "$(board_name)" in
mediatek,mt7623-rfb-nand-ephy |\
mediatek,mt7623-rfb-nand)
nand_do_upgrade $1
diff --git a/target/linux/octeon/base-files/etc/board.d/01_network b/target/linux/octeon/base-files/etc/board.d/01_network
index 851b7e8f18..79e508955e 100755
--- a/target/linux/octeon/base-files/etc/board.d/01_network
+++ b/target/linux/octeon/base-files/etc/board.d/01_network
@@ -7,7 +7,7 @@
board_config_update
-case "$(cat /tmp/sysinfo/board_name)" in
+case "$(board_name)" in
erlite)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
diff --git a/target/linux/octeon/base-files/lib/preinit/79_move_config b/target/linux/octeon/base-files/lib/preinit/79_move_config
index 4ab321b690..ec63d9f5ff 100644
--- a/target/linux/octeon/base-files/lib/preinit/79_move_config
+++ b/target/linux/octeon/base-files/lib/preinit/79_move_config
@@ -2,7 +2,9 @@
# Copyright (C) 2014 OpenWrt.org
move_config() {
- case "$(cat /tmp/sysinfo/board_name)" in
+ . /lib/functions.sh
+
+ case "$(board_name)" in
erlite)
mount -t vfat /dev/sda1 /mnt
[ -f /mnt/sysupgrade.tgz ] && mv -f /mnt/sysupgrade.tgz /
diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh b/target/linux/octeon/base-files/lib/upgrade/platform.sh
index 91763ce1c6..cd49c0da36 100755
--- a/target/linux/octeon/base-files/lib/upgrade/platform.sh
+++ b/target/linux/octeon/base-files/lib/upgrade/platform.sh
@@ -22,9 +22,7 @@ platform_get_rootfs() {
}
platform_copy_config() {
- local board="$(cat /tmp/sysinfo/board_name)"
-
- case "$board" in
+ case "$(board_name)" in
erlite)
mount -t vfat /dev/sda1 /mnt
cp -af "$CONF_TAR" /mnt/
@@ -58,7 +56,7 @@ platform_do_flash() {
platform_do_upgrade() {
local tar_file="$1"
- local board=$(cat /tmp/sysinfo/board_name)
+ local board=$(board_name)
local rootfs="$(platform_get_rootfs)"
local kernel=
@@ -81,7 +79,7 @@ platform_do_upgrade() {
}
platform_check_image() {
- local board=$(cat /tmp/sysinfo/board_name)
+ local board=$(board_name)
case "$board" in
erlite | \
diff --git a/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/10-bme-pmm-image b/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/10-bme-pmm-image
index d03c9dee03..26d367d3c7 100644
--- a/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/10-bme-pmm-image
+++ b/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/10-bme-pmm-image
@@ -7,8 +7,10 @@ n810_cal_bme_pmm_extract() {
}
}
+. /lib/functions.sh
+
[ "$FIRMWARE" = "n810-cal-bme-pmm.fw" ] && {
- [ -z "$(grep -e 'Nokia N810' /proc/cpuinfo)" ] || {
+ [ "$(board_name)" != "nokia,n810" ] || {
[ -e /lib/firmware/n810-cal-bme-pmm.fw ] ||\
n810_cal_bme_pmm_extract
}
diff --git a/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/20-p54spi-eeprom b/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/20-p54spi-eeprom
index ca92f80bea..c535747235 100644
--- a/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/20-p54spi-eeprom
+++ b/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/20-p54spi-eeprom
@@ -22,8 +22,10 @@ p54spi_eeprom_extract() {
}
}
+. /lib/functions.sh
+
[ "$FIRMWARE" = "3826.eeprom" ] && {
- [ -z "$(grep -e 'Nokia N810' /proc/cpuinfo)" ] || {
+ [ "$(board_name)" != "nokia,n810" ] || {
[ -e /lib/firmware/3826.eeprom ] ||\
p54spi_eeprom_extract
}
diff --git a/target/linux/orion/base-files/etc/hotplug.d/usb/10-usb b/target/linux/orion/base-files/etc/hotplug.d/usb/10-usb
index 5572daede1..2ae0f73bdc 100644
--- a/target/linux/orion/base-files/etc/hotplug.d/usb/10-usb
+++ b/target/linux/orion/base-files/etc/hotplug.d/usb/10-usb
@@ -30,9 +30,9 @@ usb_led_off() {
}
get_usb_led() {
- local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+ . /lib/functions.sh
- case "${hardware}" in
+ case "$(board_name)" in
'Linksys WRT350N v2')
usb_led='wrt350nv2:green:usb'
usb_device='1-1:1.0'
diff --git a/target/linux/orion/generic/base-files/etc/uci-defaults/09_hardware b/target/linux/orion/generic/base-files/etc/uci-defaults/09_hardware
index 5b30f27e5e..751749d13d 100644
--- a/target/linux/orion/generic/base-files/etc/uci-defaults/09_hardware
+++ b/target/linux/orion/generic/base-files/etc/uci-defaults/09_hardware
@@ -10,7 +10,7 @@
# This script sets system defaults for the hardware on firstboot
#
-hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+. /lib/functions.sh
wrt350nv2_default() {
# leds
@@ -47,7 +47,7 @@ __EOF
}
}
-case "${hardware}" in
+case "$(board_name)" in
'Linksys WRT350N v2')
wrt350nv2_default
;;
diff --git a/target/linux/orion/generic/base-files/lib/upgrade/platform.sh b/target/linux/orion/generic/base-files/lib/upgrade/platform.sh
index 9c9967e4af..db2330684d 100644
--- a/target/linux/orion/generic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/orion/generic/base-files/lib/upgrade/platform.sh
@@ -8,7 +8,7 @@
platform_check_image() {
[ "${ARGC}" -gt 1 ] && { echo 'Too many arguments. Only flash file expected.'; return 1; }
- local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+ local hardware="$(board_name)"
local magic="$(get_magic_word "$1")"
local magic_long="$(get_magic_long "$1")"
diff --git a/target/linux/rb532/base-files/lib/upgrade/platform.sh b/target/linux/rb532/base-files/lib/upgrade/platform.sh
index bfa73a7a24..2beccc5985 100644
--- a/target/linux/rb532/base-files/lib/upgrade/platform.sh
+++ b/target/linux/rb532/base-files/lib/upgrade/platform.sh
@@ -15,10 +15,8 @@ platform_pre_upgrade() {
}
platform_nand_pre_upgrade() {
- local board_name="$(cat /tmp/sysinfo/board_name)"
-
mtd erase kernel
- tar xf "$1" sysupgrade-$board_name/kernel -O | nandwrite -o /dev/mtd0 -
+ tar xf "$1" "sysupgrade-$(board_name)/kernel" -O | nandwrite -o /dev/mtd0 -
}
platform_do_upgrade() {
diff --git a/target/linux/x86/base-files/etc/board.d/01_leds b/target/linux/x86/base-files/etc/board.d/01_leds
index 6a5ff03b37..04e11705ac 100755
--- a/target/linux/x86/base-files/etc/board.d/01_leds
+++ b/target/linux/x86/base-files/etc/board.d/01_leds
@@ -7,9 +7,7 @@
board_config_update
-board=$(cat /tmp/sysinfo/board_name) 2>/dev/null
-
-case "$board" in
+case "$(board_name)" in
pc-engines-apu|pc-engines-apu2)
ucidef_set_led_netdev "wan" "WAN" "apu2:green:led3" "eth0"
ucidef_set_led_netdev "lan" "LAN" "apu2:green:led2" "br-lan"
diff --git a/target/linux/x86/base-files/etc/board.d/02_network b/target/linux/x86/base-files/etc/board.d/02_network
index 5bfe609740..bea696d8ff 100755
--- a/target/linux/x86/base-files/etc/board.d/02_network
+++ b/target/linux/x86/base-files/etc/board.d/02_network
@@ -8,9 +8,7 @@
board_config_update
-board="$(cat /tmp/sysinfo/board_name)" 2>/dev/null
-
-case "$board" in
+case "$(board_name)" in
pc-engines-apu|pc-engines-apu2)
ucidef_set_interfaces_lan_wan "eth1 eth2" "eth0"
;;
diff --git a/target/linux/zynq/base-files/etc/board.d/02_network b/target/linux/zynq/base-files/etc/board.d/02_network
index 9659673618..ff907637a6 100755
--- a/target/linux/zynq/base-files/etc/board.d/02_network
+++ b/target/linux/zynq/base-files/etc/board.d/02_network
@@ -5,7 +5,7 @@
board_config_update
-case "$(cat /tmp/sysinfo/board_name)" in
+case "$(board_name)" in
xlnx,zynq-zc702|xlnx,zynq-zed|xlnx,zynq-zybo)
ucidef_set_interface_lan 'eth0'
;;