aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/bcm53xx/config-4.41
-rw-r--r--target/linux/bcm53xx/patches-4.4/071-phy-bcm-ns-usb3-new-driver-for-USB-3.0-PHY-on-Norths.patch361
2 files changed, 362 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/config-4.4 b/target/linux/bcm53xx/config-4.4
index a1f8e2e64a..625b7e7e87 100644
--- a/target/linux/bcm53xx/config-4.4
+++ b/target/linux/bcm53xx/config-4.4
@@ -259,6 +259,7 @@ CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_PHY_BCM_NS_USB2 is not set
+# CONFIG_PHY_BCM_NS_USB3 is not set
CONFIG_PINCTRL=y
# CONFIG_PL310_ERRATA_588369 is not set
# CONFIG_PL310_ERRATA_727915 is not set
diff --git a/target/linux/bcm53xx/patches-4.4/071-phy-bcm-ns-usb3-new-driver-for-USB-3.0-PHY-on-Norths.patch b/target/linux/bcm53xx/patches-4.4/071-phy-bcm-ns-usb3-new-driver-for-USB-3.0-PHY-on-Norths.patch
new file mode 100644
index 0000000000..ad34fc8484
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/071-phy-bcm-ns-usb3-new-driver-for-USB-3.0-PHY-on-Norths.patch
@@ -0,0 +1,361 @@
+From b8d7478ecfec51b3430f677da44e662d5ff12444 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 12 Aug 2016 00:28:03 +0200
+Subject: [PATCH] phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Northstar is a family of SoCs used in home routers. They have USB 2.0
+and 3.0 controllers with PHYs that need to be properly initialized.
+This driver provides PHY init support in a generic way and can be bound
+with XHCI controller driver.
+
+There aren't any public datasheets from Broadcom so we can't have nice
+defines for all used bits. It means we just follow Broadcom's
+initialization procedure using their magic values. We were quite lucky
+actually that Broadcom put some comments in their SDK reference code
+explaining what given writes are responsible for.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
+---
+ .../devicetree/bindings/phy/bcm-ns-usb3-phy.txt | 23 ++
+ drivers/phy/Kconfig | 9 +
+ drivers/phy/Makefile | 1 +
+ drivers/phy/phy-bcm-ns-usb3.c | 274 +++++++++++++++++++++
+ 4 files changed, 307 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
+ create mode 100644 drivers/phy/phy-bcm-ns-usb3.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
+@@ -0,0 +1,23 @@
++Driver for Broadcom Northstar USB 3.0 PHY
++
++Required properties:
++
++- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
++- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
++ MMI.
++- reg-names: "dmp" and "ccb-mii"
++
++Initialization of USB 3.0 PHY depends on Northstar version. There are currently
++three known series: Ax, Bx and Cx.
++Known A0: BCM4707 rev 0
++Known B0: BCM4707 rev 4, BCM53573 rev 2
++Known B1: BCM4707 rev 6
++Known C0: BCM47094 rev 0
++
++Example:
++ usb3-phy {
++ compatible = "brcm,ns-ax-usb3-phy";
++ reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
++ reg-names = "dmp", "ccb-mii";
++ #phy-cells = <0>;
++ };
+--- a/drivers/phy/Kconfig
++++ b/drivers/phy/Kconfig
+@@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2
+ Enable this to support Broadcom USB 2.0 PHY connected to the USB
+ controller on Northstar family.
+
++config PHY_BCM_NS_USB3
++ tristate "Broadcom Northstar USB 3.0 PHY Driver"
++ depends on ARCH_BCM_IPROC || COMPILE_TEST
++ depends on HAS_IOMEM && OF
++ select GENERIC_PHY
++ help
++ Enable this to support Broadcom USB 3.0 PHY connected to the USB
++ controller on Northstar family.
++
+ config PHY_BERLIN_USB
+ tristate "Marvell Berlin USB PHY Driver"
+ depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+--- a/drivers/phy/Makefile
++++ b/drivers/phy/Makefile
+@@ -4,6 +4,7 @@
+
+ obj-$(CONFIG_GENERIC_PHY) += phy-core.o
+ obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
++obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
+ obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
+ obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
+ obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
+--- /dev/null
++++ b/drivers/phy/phy-bcm-ns-usb3.c
+@@ -0,0 +1,274 @@
++/*
++ * Broadcom Northstar USB 3.0 PHY Driver
++ *
++ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
++ *
++ * All magic values used for initialization (and related comments) were obtained
++ * from Broadcom's SDK:
++ * Copyright (c) Broadcom Corp, 2012
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/bcma/bcma.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++#include <linux/phy/phy.h>
++#include <linux/slab.h>
++
++#define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */
++
++enum bcm_ns_family {
++ BCM_NS_UNKNOWN,
++ BCM_NS_AX,
++ BCM_NS_BX,
++};
++
++struct bcm_ns_usb3 {
++ struct device *dev;
++ enum bcm_ns_family family;
++ void __iomem *dmp;
++ void __iomem *ccb_mii;
++ struct phy *phy;
++};
++
++static const struct of_device_id bcm_ns_usb3_id_table[] = {
++ {
++ .compatible = "brcm,ns-ax-usb3-phy",
++ .data = (int *)BCM_NS_AX,
++ },
++ {
++ .compatible = "brcm,ns-bx-usb3-phy",
++ .data = (int *)BCM_NS_BX,
++ },
++ {},
++};
++MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
++
++static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
++ u32 mask, u32 value, unsigned long timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = readl(addr);
++ if ((val & mask) == value)
++ return 0;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
++
++ return -EBUSY;
++}
++
++static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
++{
++ return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
++ 0x0100, 0x0000,
++ usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
++}
++
++static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
++{
++ int err;
++
++ err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
++ if (err < 0) {
++ dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
++ return err;
++ }
++
++ writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
++
++ return 0;
++}
++
++static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
++{
++ int err;
++
++ /* Enable MDIO. Setting MDCDIV as 26 */
++ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
++
++ /* Wait for MDIO? */
++ udelay(2);
++
++ /* USB3 PLL Block */
++ err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
++ if (err < 0)
++ return err;
++
++ /* Assert Ana_Pllseq start */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
++
++ /* Assert CML Divider ratio to 26 */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
++
++ /* Asserting PLL Reset */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
++
++ /* Deaaserting PLL Reset */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
++
++ /* Waiting MII Mgt interface idle */
++ bcm_ns_usb3_mii_mng_wait_idle(usb3);
++
++ /* Deasserting USB3 system reset */
++ writel(0, usb3->dmp + BCMA_RESET_CTL);
++
++ /* PLL frequency monitor enable */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
++
++ /* PIPE Block */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
++
++ /* CMPMAX & CMPMINTH setting */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
++
++ /* DEGLITCH MIN & MAX setting */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
++
++ /* TXPMD block */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
++
++ /* Enabling SSC */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
++
++ /* Waiting MII Mgt interface idle */
++ bcm_ns_usb3_mii_mng_wait_idle(usb3);
++
++ return 0;
++}
++
++static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
++{
++ int err;
++
++ /* Enable MDIO. Setting MDCDIV as 26 */
++ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
++
++ /* Wait for MDIO? */
++ udelay(2);
++
++ /* PLL30 block */
++ err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
++ if (err < 0)
++ return err;
++
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
++
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
++
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
++
++ /* Enable SSC */
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
++
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
++
++ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
++
++ /* Waiting MII Mgt interface idle */
++ bcm_ns_usb3_mii_mng_wait_idle(usb3);
++
++ /* Deasserting USB3 system reset */
++ writel(0, usb3->dmp + BCMA_RESET_CTL);
++
++ return 0;
++}
++
++static int bcm_ns_usb3_phy_init(struct phy *phy)
++{
++ struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy);
++ int err;
++
++ /* Perform USB3 system soft reset */
++ writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL);
++
++ switch (usb3->family) {
++ case BCM_NS_AX:
++ err = bcm_ns_usb3_phy_init_ns_ax(usb3);
++ break;
++ case BCM_NS_BX:
++ err = bcm_ns_usb3_phy_init_ns_bx(usb3);
++ break;
++ default:
++ WARN_ON(1);
++ err = -ENOTSUPP;
++ }
++
++ return err;
++}
++
++static const struct phy_ops ops = {
++ .init = bcm_ns_usb3_phy_init,
++ .owner = THIS_MODULE,
++};
++
++static int bcm_ns_usb3_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ const struct of_device_id *of_id;
++ struct bcm_ns_usb3 *usb3;
++ struct resource *res;
++ struct phy_provider *phy_provider;
++
++ usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
++ if (!usb3)
++ return -ENOMEM;
++
++ usb3->dev = dev;
++
++ of_id = of_match_device(bcm_ns_usb3_id_table, dev);
++ if (!of_id)
++ return -EINVAL;
++ usb3->family = (enum bcm_ns_family)of_id->data;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp");
++ usb3->dmp = devm_ioremap_resource(dev, res);
++ if (IS_ERR(usb3->dmp)) {
++ dev_err(dev, "Failed to map DMP regs\n");
++ return PTR_ERR(usb3->dmp);
++ }
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii");
++ usb3->ccb_mii = devm_ioremap_resource(dev, res);
++ if (IS_ERR(usb3->ccb_mii)) {
++ dev_err(dev, "Failed to map ChipCommon B MII regs\n");
++ return PTR_ERR(usb3->ccb_mii);
++ }
++
++ usb3->phy = devm_phy_create(dev, NULL, &ops);
++ if (IS_ERR(usb3->phy)) {
++ dev_err(dev, "Failed to create PHY\n");
++ return PTR_ERR(usb3->phy);
++ }
++
++ phy_set_drvdata(usb3->phy, usb3);
++ platform_set_drvdata(pdev, usb3);
++
++ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
++ if (!IS_ERR(phy_provider))
++ dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n");
++
++ return PTR_ERR_OR_ZERO(phy_provider);
++}
++
++static struct platform_driver bcm_ns_usb3_driver = {
++ .probe = bcm_ns_usb3_probe,
++ .driver = {
++ .name = "bcm_ns_usb3",
++ .of_match_table = bcm_ns_usb3_id_table,
++ },
++};
++module_platform_driver(bcm_ns_usb3_driver);
++
++MODULE_LICENSE("GPL v2");