diff options
Diffstat (limited to 'package/firmware/fritz-tools')
-rw-r--r-- | package/firmware/fritz-tools/Makefile | 30 | ||||
-rw-r--r-- | package/firmware/fritz-tools/README.md | 50 | ||||
-rw-r--r-- | package/firmware/fritz-tools/src/CMakeLists.txt | 12 | ||||
-rw-r--r-- | package/firmware/fritz-tools/src/fritz_cal_extract.c | 259 | ||||
-rw-r--r-- | package/firmware/fritz-tools/src/fritz_tffs_read.c | 375 |
5 files changed, 0 insertions, 726 deletions
diff --git a/package/firmware/fritz-tools/Makefile b/package/firmware/fritz-tools/Makefile deleted file mode 100644 index 4891dcaca3..0000000000 --- a/package/firmware/fritz-tools/Makefile +++ /dev/null @@ -1,30 +0,0 @@ -include $(TOPDIR)/rules.mk - -PKG_NAME:=fritz-tools -PKG_RELEASE:=1 -CMAKE_INSTALL:=1 -PKG_FLAGS:=nonshared - -include $(INCLUDE_DIR)/package.mk -include $(INCLUDE_DIR)/cmake.mk - -define Package/fritz-tools - SECTION:=firmware - CATEGORY:=Firmware - DEPENDS:=@TARGET_ipq806x +zlib - TITLE:=Utilites for accessing AVM Calibration data and TFFS -endef - -define Package/fritz-tools/description - This package contains: - fritz_cal_extract.c: tool to extract WLAN calibration data. - fritz_tffs_read.c: partially read the TFFS filesystems. -endef - -define Package/fritz-tools/install - $(INSTALL_DIR) $(1)/usr/bin - $(INSTALL_BIN) $(PKG_BUILD_DIR)/fritz_cal_extract $(1)/usr/bin/ - $(INSTALL_BIN) $(PKG_BUILD_DIR)/fritz_tffs_read $(1)/usr/bin/ -endef - -$(eval $(call BuildPackage,fritz-tools)) diff --git a/package/firmware/fritz-tools/README.md b/package/firmware/fritz-tools/README.md deleted file mode 100644 index def237b174..0000000000 --- a/package/firmware/fritz-tools/README.md +++ /dev/null @@ -1,50 +0,0 @@ -Userspace utilties for accessing TFFS (a name-value storage usually found in AVM Fritz!Box based devices) - -## Building - -``` -mkdir build -cd build -cmake /path/to/fritz_tffs_tools -make -``` - -## Usage - -All command line parameters are documented: -``` -fritz_tffs_read -h -``` - -Show all entries from a TFFS partition dump (in the format: name=value): -``` -fritz_tffs_read -i /path/to/tffs.dump -a -``` - -Read a TFFS partition and show all entries (in the format: name=value): -``` -fritz_tffs_read -i /dev/mtdX -a -``` - -Output only the value of a specific key (this will only show the value): -``` -fritz_tffs_read -i /dev/mtdX -n my_ipaddress -``` - -## LICENSE - -See `LICENSE`: - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. diff --git a/package/firmware/fritz-tools/src/CMakeLists.txt b/package/firmware/fritz-tools/src/CMakeLists.txt deleted file mode 100644 index 116bca9dc0..0000000000 --- a/package/firmware/fritz-tools/src/CMakeLists.txt +++ /dev/null @@ -1,12 +0,0 @@ -cmake_minimum_required(VERSION 2.6) - -PROJECT(fritz-tools C) -ADD_DEFINITIONS(-Wall -Werror --std=gnu99 -Wmissing-declarations) - -SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "") - -ADD_EXECUTABLE(fritz_tffs_read fritz_tffs_read.c) -ADD_EXECUTABLE(fritz_cal_extract fritz_cal_extract.c) -TARGET_LINK_LIBRARIES(fritz_cal_extract z) - -INSTALL(TARGETS fritz_tffs_read fritz_cal_extract RUNTIME DESTINATION bin) diff --git a/package/firmware/fritz-tools/src/fritz_cal_extract.c b/package/firmware/fritz-tools/src/fritz_cal_extract.c deleted file mode 100644 index 8156dfd1a7..0000000000 --- a/package/firmware/fritz-tools/src/fritz_cal_extract.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * A tool for reading the zlib compressed calibration data - * found in AVM Fritz!Box based devices). - * - * Copyright (c) 2017 Christian Lamparter <chunkeey@googlemail.com> - * - * Based on zpipe, which is an example of proper use of zlib's inflate(). - * that is Not copyrighted -- provided to the public domain - * Version 1.4 11 December 2005 Mark Adler - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <stdio.h> -#include <string.h> -#include <assert.h> -#include <unistd.h> -#include <stdint.h> -#include <stdlib.h> -#include <endian.h> -#include <errno.h> -#include "zlib.h" - -#define CHUNK 1024 - -static inline size_t special_min(size_t a, size_t b) -{ - return a == 0 ? b : (a < b ? a : b); -} - -/* Decompress from file source to file dest until stream ends or EOF. - inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be - allocated for processing, Z_DATA_ERROR if the deflate data is - invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and - the version of the library linked do not match, or Z_ERRNO if there - is an error reading or writing the files. */ -static int inf(FILE *source, FILE *dest, size_t limit, size_t skip) -{ - int ret; - size_t have; - z_stream strm; - unsigned char in[CHUNK]; - unsigned char out[CHUNK]; - - /* allocate inflate state */ - strm.zalloc = Z_NULL; - strm.zfree = Z_NULL; - strm.opaque = Z_NULL; - strm.avail_in = 0; - strm.next_in = Z_NULL; - ret = inflateInit(&strm); - if (ret != Z_OK) - return ret; - - /* decompress until deflate stream ends or end of file */ - do { - strm.avail_in = fread(in, 1, CHUNK, source); - if (ferror(source)) { - (void)inflateEnd(&strm); - return Z_ERRNO; - } - if (strm.avail_in == 0) - break; - strm.next_in = in; - - /* run inflate() on input until output buffer not full */ - do { - strm.avail_out = CHUNK; - strm.next_out = out; - ret = inflate(&strm, Z_NO_FLUSH); - assert(ret != Z_STREAM_ERROR); /* state not clobbered */ - switch (ret) { - case Z_NEED_DICT: - ret = Z_DATA_ERROR; /* and fall through */ - case Z_DATA_ERROR: - case Z_MEM_ERROR: - (void)inflateEnd(&strm); - return ret; - } - have = special_min(limit, CHUNK - strm.avail_out) - skip; - if (fwrite(&out[skip], have, 1, dest) != 1 || ferror(dest)) { - (void)inflateEnd(&strm); - return Z_ERRNO; - } - skip = 0; - limit -= have; - } while (strm.avail_out == 0 && limit > 0); - - /* done when inflate() says it's done */ - } while (ret != Z_STREAM_END && limit > 0); - - /* clean up and return */ - (void)inflateEnd(&strm); - return (limit == 0 ? Z_OK : (ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR)); -} - -/* report a zlib or i/o error */ -static void zerr(int ret) -{ - switch (ret) { - case Z_ERRNO: - if (ferror(stdin)) - fputs("error reading stdin\n", stderr); - if (ferror(stdout)) - fputs("error writing stdout\n", stderr); - break; - case Z_STREAM_ERROR: - fputs("invalid compression level\n", stderr); - break; - case Z_DATA_ERROR: - fputs("invalid or incomplete deflate data\n", stderr); - break; - case Z_MEM_ERROR: - fputs("out of memory\n", stderr); - break; - case Z_VERSION_ERROR: - fputs("zlib version mismatch!\n", stderr); - } -} - -static unsigned int get_num(char *str) -{ - if (!strncmp("0x", str, 2)) - return strtoul(str+2, NULL, 16); - else - return strtoul(str, NULL, 10); -} - -static void usage(void) -{ - fprintf(stderr, "Usage: fritz_cal_extract [-s seek offset] [-i skip] [-o output file] [-l limit] [infile] -e entry_id\n" - "Finds and extracts zlib compressed calibration data in the EVA loader\n"); - exit(EXIT_FAILURE); -} - -struct cal_entry { - uint16_t id; - uint16_t len; -} __attribute__((packed)); - -/* compress or decompress from stdin to stdout */ -int main(int argc, char **argv) -{ - struct cal_entry cal = { .len = 0 }; - FILE *in = stdin; - FILE *out = stdout; - size_t limit = 0, skip = 0; - int initial_offset = 0; - int entry = -1; - int ret; - int opt; - - while ((opt = getopt(argc, argv, "s:e:o:l:i:")) != -1) { - switch (opt) { - case 's': - initial_offset = (int)get_num(optarg); - if (errno) { - perror("Failed to parse seek offset"); - goto out_bad; - } - break; - case 'e': - entry = (int) htobe16(get_num(optarg)); - if (errno) { - perror("Failed to entry id"); - goto out_bad; - } - break; - case 'o': - out = fopen(optarg, "w"); - if (!out) { - perror("Failed to create output file"); - goto out_bad; - } - break; - case 'l': - limit = (size_t)get_num(optarg); - if (errno) { - perror("Failed to parse limit"); - goto out_bad; - } - break; - case 'i': - skip = (size_t)get_num(optarg); - if (errno) { - perror("Failed to parse skip"); - goto out_bad; - } - break; - default: /* '?' */ - usage(); - } - } - - if (entry == -1) - usage(); - - if (argc > 1 && optind <= argc) { - in = fopen(argv[optind], "r"); - if (!in) { - perror("Failed to create output file"); - goto out_bad; - } - } - - if (initial_offset) { - ret = fseek(in, initial_offset, SEEK_CUR); - if (ret) { - perror("Failed to seek to calibration table"); - goto out_bad; - } - } - - do { - ret = fseek(in, be16toh(cal.len), SEEK_CUR); - if (feof(in)) { - fprintf(stderr, "Reached end of file, but didn't find the matching entry\n"); - goto out_bad; - } else if (ferror(in)) { - perror("Failure during seek"); - goto out_bad; - } - - ret = fread(&cal, 1, sizeof cal, in); - if (ret != sizeof cal) - goto out_bad; - } while (entry != cal.id || cal.id == 0xffff); - - if (cal.id == 0xffff) { - fprintf(stderr, "Reached end of filesystem, but didn't find the matching entry\n"); - goto out_bad; - } - - ret = inf(in, out, limit, skip); - if (ret == Z_OK) - goto out; - - zerr(ret); - -out_bad: - ret = EXIT_FAILURE; - -out: - fclose(in); - fclose(out); - return ret; -} diff --git a/package/firmware/fritz-tools/src/fritz_tffs_read.c b/package/firmware/fritz-tools/src/fritz_tffs_read.c deleted file mode 100644 index f367e02e04..0000000000 --- a/package/firmware/fritz-tools/src/fritz_tffs_read.c +++ /dev/null @@ -1,375 +0,0 @@ -/* - * A tool for reading the TFFS partitions (a name-value storage usually - * found in AVM Fritz!Box based devices). - * - * Copyright (c) 2015-2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com> - * - * Based on the TFFS 2.0 kernel driver from AVM: - * Copyright (c) 2004-2007 AVM GmbH <fritzbox_info@avm.de> - * and the OpenWrt TFFS kernel driver: - * Copyright (c) 2013 John Crispin <blogic@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <stdbool.h> -#include <stdio.h> -#include <stdlib.h> -#include <stdint.h> -#include <string.h> -#include <libgen.h> -#include <getopt.h> -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <arpa/inet.h> - -#define DEFAULT_TFFS_SIZE (256 * 1024) - -#define TFFS_ID_END 0xffff -#define TFFS_ID_TABLE_NAME 0x01ff - -static char *progname; -static char *input_file; -static unsigned long tffs_size = DEFAULT_TFFS_SIZE; -static char *name_filter = NULL; -static bool show_all = false; -static bool print_all_key_names = false; -static bool swap_bytes = false; - -struct tffs_entry_header { - uint16_t id; - uint16_t len; -}; - -struct tffs_entry { - const struct tffs_entry_header *header; - char *name; - uint8_t *val; -}; - -struct tffs_name_table_entry { - const uint32_t *id; - const char *val; -}; - -struct tffs_key_name_table { - uint32_t size; - struct tffs_name_table_entry *entries; -}; - -static inline uint16_t get_header_len(const struct tffs_entry_header *header) -{ - if (swap_bytes) - return ntohs(header->len); - - return header->len; -} - -static inline uint16_t get_header_id(const struct tffs_entry_header *header) -{ - if (swap_bytes) - return ntohs(header->id); - - return header->id; -} - -static inline uint16_t to_entry_header_id(uint32_t name_id) -{ - if (swap_bytes) - return ntohl(name_id) & 0xffff; - - return name_id & 0xffff; -} - -static inline uint32_t get_walk_size(uint32_t entry_len) -{ - return (entry_len + 3) & ~0x03; -} - -static void print_entry_value(const struct tffs_entry *entry) -{ - int i; - - /* These are NOT NULL terminated. */ - for (i = 0; i < get_header_len(entry->header); i++) - fprintf(stdout, "%c", entry->val[i]); -} - -static void parse_entry(uint8_t *buffer, uint32_t pos, - struct tffs_entry *entry) -{ - entry->header = (struct tffs_entry_header *) &buffer[pos]; - entry->val = &buffer[pos + sizeof(struct tffs_entry_header)]; -} - -static int find_entry(uint8_t *buffer, uint16_t id, struct tffs_entry *entry) -{ - uint32_t pos = 0; - - do { - parse_entry(buffer, pos, entry); - - if (get_header_id(entry->header) == id) - return 1; - - pos += sizeof(struct tffs_entry_header); - pos += get_walk_size(get_header_len(entry->header)); - } while (pos < tffs_size && entry->header->id != TFFS_ID_END); - - return 0; -} - -static void parse_key_names(struct tffs_entry *names_entry, - struct tffs_key_name_table *key_names) -{ - uint32_t pos = 0, i = 0; - struct tffs_name_table_entry *name_item; - - key_names->entries = calloc(sizeof(*name_item), 1); - - do { - name_item = &key_names->entries[i]; - - name_item->id = (uint32_t *) &names_entry->val[pos]; - pos += sizeof(*name_item->id); - name_item->val = (const char *) &names_entry->val[pos]; - - /* - * There is no "length" field because the string values are - * simply NULL-terminated -> strlen() gives us the size. - */ - pos += get_walk_size(strlen(name_item->val) + 1); - - ++i; - key_names->entries = realloc(key_names->entries, - sizeof(*name_item) * (i + 1)); - } while (pos < get_header_len(names_entry->header)); - - key_names->size = i; -} - -static void show_all_key_names(struct tffs_key_name_table *key_names) -{ - int i; - - for (i = 0; i < key_names->size; i++) - printf("%s\n", key_names->entries[i].val); -} - -static int show_all_key_value_pairs(uint8_t *buffer, - struct tffs_key_name_table *key_names) -{ - int i, has_value = 0; - uint16_t id; - struct tffs_entry tmp; - - for (i = 0; i < key_names->size; i++) { - id = to_entry_header_id(*key_names->entries[i].id); - - if (find_entry(buffer, id, &tmp)) { - printf("%s=", key_names->entries[i].val); - print_entry_value(&tmp); - printf("\n"); - has_value++; - } - } - - if (!has_value) { - fprintf(stderr, "ERROR: no values found!\n"); - return EXIT_FAILURE; - } - - return EXIT_SUCCESS; -} - -static int show_matching_key_value(uint8_t *buffer, - struct tffs_key_name_table *key_names) -{ - int i; - uint16_t id; - struct tffs_entry tmp; - const char *name; - - for (i = 0; i < key_names->size; i++) { - name = key_names->entries[i].val; - - if (strncmp(name, name_filter, strlen(name)) == 0) { - id = to_entry_header_id(*key_names->entries[i].id); - - if (find_entry(buffer, id, &tmp)) { - print_entry_value(&tmp); - printf("\n"); - return EXIT_SUCCESS; - } else { - fprintf(stderr, - "ERROR: no value found for name %s!\n", - name); - return EXIT_FAILURE; - } - } - } - - fprintf(stderr, "ERROR: Unknown key name %s!\n", name_filter); - return EXIT_FAILURE; -} - -static void usage(int status) -{ - FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout; - - fprintf(stream, "Usage: %s [OPTIONS...]\n", progname); - fprintf(stream, - "\n" - "Options:\n" - " -a list all key value pairs found in the TFFS file/device\n" - " -b swap bytes while parsing the TFFS file/device\n" - " -h show this screen\n" - " -i <file> inspect the given TFFS file/device <file>\n" - " -l list all supported keys\n" - " -n <key name> display the value of the given key\n" - " -s <size> the (max) size of the TFFS file/device <size>\n" - ); - - exit(status); -} - -static int file_exist(char *filename) -{ - struct stat buffer; - - return stat(filename, &buffer) == 0; -} - -static void parse_options(int argc, char *argv[]) -{ - while (1) - { - int c; - - c = getopt(argc, argv, "abhi:ln:s"); - if (c == -1) - break; - - switch (c) { - case 'a': - show_all = true; - name_filter = NULL; - print_all_key_names = false; - break; - case 'b': - swap_bytes = 1; - break; - case 'h': - usage(EXIT_SUCCESS); - break; - case 'i': - input_file = optarg; - break; - case 'l': - print_all_key_names = true; - show_all = false; - name_filter = NULL; - break; - case 'n': - name_filter = optarg; - show_all = false; - print_all_key_names = false; - break; - case 's': - tffs_size = strtoul(optarg, NULL, 0); - break; - default: - usage(EXIT_FAILURE); - break; - } - } - - if (!input_file) { - fprintf(stderr, "ERROR: No input file (-i <file>) given!\n"); - exit(EXIT_FAILURE); - } - - if (!file_exist(input_file)) { - fprintf(stderr, "ERROR: %s does not exist\n", input_file); - exit(EXIT_FAILURE); - } - - if (!show_all && !name_filter && !print_all_key_names) { - fprintf(stderr, - "ERROR: either -l, -a or -n <key name> is required!\n"); - exit(EXIT_FAILURE); - } -} - -int main(int argc, char *argv[]) -{ - int ret = EXIT_FAILURE; - uint8_t *buffer; - FILE *fp; - struct tffs_entry name_table; - struct tffs_key_name_table key_names; - - progname = basename(argv[0]); - - parse_options(argc, argv); - - fp = fopen(input_file, "r"); - - if (!fp) { - fprintf(stderr, "ERROR: Failed to open tffs input file %s\n", - input_file); - goto out; - } - - buffer = malloc(tffs_size); - - if (fread(buffer, 1, tffs_size, fp) != tffs_size) { - fprintf(stderr, "ERROR: Failed read tffs file %s\n", - input_file); - goto out_free; - } - - if (!find_entry(buffer, TFFS_ID_TABLE_NAME, &name_table)) { - fprintf(stderr,"ERROR: No name table found in tffs file %s\n", - input_file); - fprintf(stderr," Is byte-swapping (-b) required?\n"); - goto out_free; - } - - parse_key_names(&name_table, &key_names); - if (key_names.size < 1) { - fprintf(stderr, "ERROR: No name table found in tffs file %s\n", - input_file); - goto out_free_names; - } - - if (print_all_key_names) { - show_all_key_names(&key_names); - ret = EXIT_SUCCESS; - } else if (show_all) { - ret = show_all_key_value_pairs(buffer, &key_names); - } else { - ret = show_matching_key_value(buffer, &key_names); - } - -out_free_names: - free(key_names.entries); -out_free: - fclose(fp); - free(buffer); -out: - return ret; -} |