diff options
Diffstat (limited to 'package/network/services/hostapd/patches/559-tests-add-WPS-tests-to-multi_ap-hwsim-tests.patch')
| -rw-r--r-- | package/network/services/hostapd/patches/559-tests-add-WPS-tests-to-multi_ap-hwsim-tests.patch | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/package/network/services/hostapd/patches/559-tests-add-WPS-tests-to-multi_ap-hwsim-tests.patch b/package/network/services/hostapd/patches/559-tests-add-WPS-tests-to-multi_ap-hwsim-tests.patch new file mode 100644 index 0000000000..3a121ba911 --- /dev/null +++ b/package/network/services/hostapd/patches/559-tests-add-WPS-tests-to-multi_ap-hwsim-tests.patch @@ -0,0 +1,182 @@ +From 0729e01f5830ebf4701f0b1b7ff1bd2a2eedae40 Mon Sep 17 00:00:00 2001 +From: "Arnout Vandecappelle (Essensium/Mind)" <arnout@mind.be> +Date: Tue, 12 Feb 2019 11:02:42 +0100 +Subject: [PATCH] tests: add WPS tests to multi_ap hwsim tests + +Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> +--- +v4: new patch +--- + tests/hwsim/test_multi_ap.py | 164 +++++++++++++++++++++++++++++++++++ + 1 file changed, 164 insertions(+) + +--- a/tests/hwsim/test_multi_ap.py ++++ b/tests/hwsim/test_multi_ap.py +@@ -61,3 +61,167 @@ def test_multi_ap_fronthaul_on_ap(dev, a + raise Exception("Connection result not reported") + if "CTRL-EVENT-DISCONNECTED" not in ev: + raise Exception("Unexpected connection result") ++ ++def run_multi_ap_wps(dev, apdev, params, multi_ap_bssid = None): ++ """Helper for running Multi-AP WPS tests ++ ++ dev[0] does multi_ap WPS, dev[1] does normal WPS. apdev[0] is the fronthaul ++ BSS. If there is a separate backhaul BSS, it must have been set up by the ++ caller. params are the normal SSID parameters, they will be extended with ++ the WPS parameters. multi_ap_bssid must be given if it is not equal to the ++ fronthaul BSSID.""" ++ ++ if multi_ap_bssid is None: ++ multi_ap_bssid = apdev[0]['bssid'] ++ params.update({"wps_state": "2", "eap_server": "1"}) ++ ++ # WPS with multi-ap station dev[0] ++ hapd = hostapd.add_ap(apdev[0], params) ++ hapd.request("WPS_PBC") ++ if "PBC Status: Active" not in hapd.request("WPS_GET_STATUS"): ++ raise Exception("PBC status not shown correctly") ++ ++ dev[0].request("WPS_PBC multi_ap=1") ++ dev[0].wait_connected(timeout=20) ++ status = dev[0].get_status() ++ if status['wpa_state'] != 'COMPLETED' or status['bssid'] != multi_ap_bssid: ++ raise Exception("Not fully connected") ++ if status['ssid'] != params['multi_ap_backhaul_ssid'].strip('"'): ++ raise Exception("Unexpected SSID %s != %s" % (status['ssid'], params["multi_ap_backhaul_ssid"])) ++ if status['pairwise_cipher'] != 'CCMP': ++ raise Exception("Unexpected encryption configuration %s" % status['pairwise_cipher']) ++ if status['key_mgmt'] != 'WPA2-PSK': ++ raise Exception("Unexpected key_mgmt") ++ ++ status = hapd.request("WPS_GET_STATUS") ++ if "PBC Status: Disabled" not in status: ++ raise Exception("PBC status not shown correctly") ++ if "Last WPS result: Success" not in status: ++ raise Exception("Last WPS result not shown correctly") ++ if "Peer Address: " + dev[0].p2p_interface_addr() not in status: ++ raise Exception("Peer address not shown correctly") ++ ++ if len(dev[0].list_networks()) != 1: ++ raise Exception("Unexpected number of network blocks") ++ ++ # WPS with non-multi-ap station dev[1] ++ hapd.request("WPS_PBC") ++ if "PBC Status: Active" not in hapd.request("WPS_GET_STATUS"): ++ raise Exception("PBC status not shown correctly") ++ ++ dev[1].request("WPS_PBC") ++ dev[1].wait_connected(timeout=20) ++ status = dev[1].get_status() ++ if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']: ++ raise Exception("Not fully connected") ++ if status['ssid'] != params["ssid"]: ++ raise Exception("Unexpected SSID") ++ # Fronthaul may be something else than WPA2-PSK so don't test it. ++ ++ status = hapd.request("WPS_GET_STATUS") ++ if "PBC Status: Disabled" not in status: ++ raise Exception("PBC status not shown correctly") ++ if "Last WPS result: Success" not in status: ++ raise Exception("Last WPS result not shown correctly") ++ if "Peer Address: " + dev[1].p2p_interface_addr() not in status: ++ raise Exception("Peer address not shown correctly") ++ ++ if len(dev[1].list_networks()) != 1: ++ raise Exception("Unexpected number of network blocks") ++ ++ ++def test_multi_ap_wps_shared(dev, apdev): ++ """WPS on shared fronthaul/backhaul AP""" ++ ssid = "multi-ap-wps" ++ passphrase = "12345678" ++ params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase) ++ params.update({"multi_ap": "3", ++ "multi_ap_backhaul_ssid": '"%s"' % ssid, ++ "multi_ap_backhaul_wpa_passphrase": passphrase}) ++ run_multi_ap_wps(dev, apdev, params) ++ ++def test_multi_ap_wps_shared_psk(dev, apdev): ++ """WPS on shared fronthaul/backhaul AP using PSK""" ++ ssid = "multi-ap-wps" ++ psk = "1234567890abcdef0123456789abcdef0123456789abcdef0123456789abcdef" ++ params = hostapd.wpa2_params(ssid=ssid) ++ params.update({"wpa_psk": psk, "multi_ap": "3", ++ "multi_ap_backhaul_ssid": '"%s"' % ssid, ++ "multi_ap_backhaul_wpa_psk": psk}) ++ run_multi_ap_wps(dev, apdev, params) ++ ++def test_multi_ap_wps_split(dev, apdev): ++ """WPS on split fronthaul and backhaul AP""" ++ backhaul_ssid = "multi-ap-backhaul-wps" ++ backhaul_passphrase = "87654321" ++ params = hostapd.wpa2_params(ssid="multi-ap-fronthaul-wps", passphrase="12345678") ++ params.update({"multi_ap": "2", ++ "multi_ap_backhaul_ssid": '"%s"' % backhaul_ssid, ++ "multi_ap_backhaul_wpa_passphrase": backhaul_passphrase}) ++ params_backhaul = hostapd.wpa2_params(ssid=backhaul_ssid, passphrase=backhaul_passphrase) ++ params_backhaul.update({"multi_ap": "1"}) ++ hapd_backhaul = hostapd.add_ap(apdev[1], params_backhaul) ++ ++ run_multi_ap_wps(dev, apdev, params, hapd_backhaul.own_addr()) ++ ++def test_multi_ap_wps_split_psk(dev, apdev): ++ """WPS on split fronthaul and backhaul AP""" ++ backhaul_ssid = "multi-ap-backhaul-wps" ++ backhaul_psk = "1234567890abcdef0123456789abcdef0123456789abcdef0123456789abcdef" ++ params = hostapd.wpa2_params(ssid="multi-ap-fronthaul-wps", passphrase="12345678") ++ params.update({"multi_ap": "2", ++ "multi_ap_backhaul_ssid": '"%s"' % backhaul_ssid, ++ "multi_ap_backhaul_wpa_psk": backhaul_psk}) ++ params_backhaul = hostapd.wpa2_params(ssid=backhaul_ssid) ++ params_backhaul.update({"multi_ap": "1", "wpa_psk": backhaul_psk}) ++ hapd_backhaul = hostapd.add_ap(apdev[1], params_backhaul) ++ ++ run_multi_ap_wps(dev, apdev, params, hapd_backhaul.own_addr()) ++ ++def test_multi_ap_wps_split_mixed(dev, apdev): ++ """WPS on split fronthaul and backhaul AP with mixed-mode fronthaul""" ++ backhaul_ssid = "multi-ap-backhaul-wps" ++ backhaul_passphrase = "87654321" ++ params = hostapd.wpa_mixed_params(ssid="multi-ap-fronthaul-wps", passphrase="12345678") ++ params.update({"multi_ap": "2", ++ "multi_ap_backhaul_ssid": '"%s"' % backhaul_ssid, ++ "multi_ap_backhaul_wpa_passphrase": backhaul_passphrase}) ++ params_backhaul = hostapd.wpa2_params(ssid=backhaul_ssid, passphrase=backhaul_passphrase) ++ params_backhaul.update({"multi_ap": "1"}) ++ hapd_backhaul = hostapd.add_ap(apdev[1], params_backhaul) ++ ++ run_multi_ap_wps(dev, apdev, params, hapd_backhaul.own_addr()) ++ ++def test_multi_ap_wps_split_open(dev, apdev): ++ """WPS on split fronthaul and backhaul AP with open fronthaul""" ++ backhaul_ssid = "multi-ap-backhaul-wps" ++ backhaul_passphrase = "87654321" ++ params = {"ssid": "multi-ap-wps-fronthaul", "multi_ap": "2", ++ "multi_ap_backhaul_ssid": '"%s"' % backhaul_ssid, ++ "multi_ap_backhaul_wpa_passphrase": backhaul_passphrase} ++ params_backhaul = hostapd.wpa2_params(ssid=backhaul_ssid, passphrase=backhaul_passphrase) ++ params_backhaul.update({"multi_ap": "1"}) ++ hapd_backhaul = hostapd.add_ap(apdev[1], params_backhaul) ++ ++ run_multi_ap_wps(dev, apdev, params, hapd_backhaul.own_addr()) ++ ++def test_multi_ap_wps_fail_non_multi_ap(dev, apdev): ++ """Multi-AP WPS on non-WPS AP fails""" ++ ++ params = hostapd.wpa2_params(ssid="non-multi-ap-wps", passphrase="12345678") ++ params.update({"wps_state": "2", "eap_server": "1"}) ++ ++ hapd = hostapd.add_ap(apdev[0], params) ++ hapd.request("WPS_PBC") ++ if "PBC Status: Active" not in hapd.request("WPS_GET_STATUS"): ++ raise Exception("PBC status not shown correctly") ++ ++ dev[0].request("WPS_PBC multi_ap=1") ++ # Since we will fail to associate and WPS doesn't even get started, there ++ # isn't much we can do except wait for timeout. For PBC, it is not possible ++ # to change the timeout from 2 minutes. Instead of waiting for the timeout, ++ # just check that WPS doesn't finish within reasonable time. ++ ev = dev[0].wait_event(["WPS-SUCCESS", "WPS-FAIL"], timeout=20) ++ if ev: ++ raise Exception("WPS operation completed: " + ev) ++ dev[0].request("WPS_CANCEL") |