aboutsummaryrefslogtreecommitdiffstats
path: root/package/network/utils
diff options
context:
space:
mode:
Diffstat (limited to 'package/network/utils')
-rw-r--r--package/network/utils/iw/patches/001-nl80211_h_sync.patch346
1 files changed, 344 insertions, 2 deletions
diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index 4b462d3f20..394acbd0e7 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -1,21 +1,363 @@
--- a/nl80211.h
+++ b/nl80211.h
-@@ -2515,6 +2515,9 @@ enum nl80211_commands {
+@@ -252,9 +252,13 @@
+ * DOC: SAE authentication offload
+ *
+ * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
+- * support offloading SAE authentication for WPA3-Personal networks. In
+- * %NL80211_CMD_CONNECT the password for SAE should be specified using
+- * %NL80211_ATTR_SAE_PASSWORD.
++ * support offloading SAE authentication for WPA3-Personal networks in station
++ * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by
++ * drivers indicating the offload support in AP mode.
++ *
++ * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in
++ * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode
++ * respectively.
+ */
+
+ /**
+@@ -647,13 +651,9 @@
+ * authentication/association or not receiving a response from the AP.
+ * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
+ * well to remain backwards compatible.
+- * When establishing a security association, drivers that support 4 way
+- * handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when
+- * the 4 way handshake is completed successfully.
+ * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
+- * When a security association was established with the new AP (e.g. if
+- * the FT protocol was used for roaming or the driver completed the 4 way
+- * handshake), this event should be followed by an
++ * When a security association was established on an 802.1X network using
++ * fast transition, this event should be followed by an
+ * %NL80211_CMD_PORT_AUTHORIZED event.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ * userspace that a connection was dropped by the AP or due to other
+@@ -1067,13 +1067,11 @@
+ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
+ * configured PMK for the authenticator address identified by
+ * %NL80211_ATTR_MAC.
+- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
+- * handshake was completed successfully by the driver. The BSSID is
+- * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake
+- * offload should send this event after indicating 802.11 association with
+- * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed
+- * %NL80211_CMD_DISCONNECT should be indicated instead.
+- *
++ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
++ * completed successfully. Drivers that support 4 way handshake offload
++ * should send this event after indicating 802.1X FT assocation with
++ * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
++ * should be indicated instead.
+ * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
+ * and RX notification. This command is used both as a request to transmit
+ * a control port frame and as a notification that a control port frame
+@@ -2082,10 +2080,10 @@ enum nl80211_commands {
+ * operation).
+ * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+ * for the time while performing a channel switch.
+- * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
+- * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+- * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
+- * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
++ * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
++ * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
++ * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel
++ * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP).
+ *
+ * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
+ * As specified in the &enum nl80211_rxmgmt_flags.
+@@ -2515,6 +2513,23 @@ enum nl80211_commands {
* @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
* association request when used with NL80211_CMD_NEW_STATION).
*
++ * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
++ * discovery. It is a nested attribute, see
++ * &enum nl80211_fils_discovery_attributes.
++ *
++ * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
++ * unsolicited broadcast probe response. It is a nested attribute, see
++ * &enum nl80211_unsol_bcast_probe_resp_attributes.
++ *
++ * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
++ * association request when used with NL80211_CMD_NEW_STATION)
++ * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
++ * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
++ * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
++ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2997,6 +3000,8 @@ enum nl80211_attrs {
+@@ -2821,8 +2836,8 @@ enum nl80211_attrs {
+ NL80211_ATTR_CH_SWITCH_COUNT,
+ NL80211_ATTR_CH_SWITCH_BLOCK_TX,
+ NL80211_ATTR_CSA_IES,
+- NL80211_ATTR_CSA_C_OFF_BEACON,
+- NL80211_ATTR_CSA_C_OFF_PRESP,
++ NL80211_ATTR_CNTDWN_OFFS_BEACON,
++ NL80211_ATTR_CNTDWN_OFFS_PRESP,
+
+ NL80211_ATTR_RXMGMT_FLAGS,
+
+@@ -2997,6 +3012,15 @@ enum nl80211_attrs {
NL80211_ATTR_HE_6GHZ_CAPABILITY,
++ NL80211_ATTR_FILS_DISCOVERY,
++
++ NL80211_ATTR_UNSOL_BCAST_PROBE_RESP,
++
++ NL80211_ATTR_S1G_CAPABILITY,
++ NL80211_ATTR_S1G_CAPABILITY_MASK,
++
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
+@@ -3009,6 +3033,8 @@ enum nl80211_attrs {
+ #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
+ #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
+ #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
++#define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON
++#define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP
+
+ /*
+ * Allow user space programs to use #ifdef on new attributes by defining them
+@@ -3186,6 +3212,18 @@ enum nl80211_he_gi {
+ NL80211_RATE_INFO_HE_GI_3_2,
+ };
+
++/**
++ * enum nl80211_he_ltf - HE long training field
++ * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
++ * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
++ * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
++ */
++enum nl80211_he_ltf {
++ NL80211_RATE_INFO_HE_1XLTF,
++ NL80211_RATE_INFO_HE_2XLTF,
++ NL80211_RATE_INFO_HE_4XLTF,
++};
++
+ /**
+ * enum nl80211_he_ru_alloc - HE RU allocation values
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
+@@ -3725,6 +3763,16 @@ enum nl80211_wmm_rule {
+ * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
+ * in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
++ * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed
++ * on this channel in current regulatory domain.
++ * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed
++ * on this channel in current regulatory domain.
++ * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed
++ * on this channel in current regulatory domain.
++ * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed
++ * on this channel in current regulatory domain.
++ * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
++ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ * currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+@@ -3756,6 +3804,11 @@ enum nl80211_frequency_attr {
+ NL80211_FREQUENCY_ATTR_WMM,
+ NL80211_FREQUENCY_ATTR_NO_HE,
+ NL80211_FREQUENCY_ATTR_OFFSET,
++ NL80211_FREQUENCY_ATTR_1MHZ,
++ NL80211_FREQUENCY_ATTR_2MHZ,
++ NL80211_FREQUENCY_ATTR_4MHZ,
++ NL80211_FREQUENCY_ATTR_8MHZ,
++ NL80211_FREQUENCY_ATTR_16MHZ,
+
+ /* keep last */
+ __NL80211_FREQUENCY_ATTR_AFTER_LAST,
+@@ -4049,6 +4102,7 @@ enum nl80211_user_reg_hint_type {
+ * receiving frames destined to the local BSS
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+ * currently defined
++ * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
+ */
+ enum nl80211_survey_info {
+@@ -4064,6 +4118,7 @@ enum nl80211_survey_info {
+ NL80211_SURVEY_INFO_TIME_SCAN,
+ NL80211_SURVEY_INFO_PAD,
+ NL80211_SURVEY_INFO_TIME_BSS_RX,
++ NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
+
+ /* keep last */
+ __NL80211_SURVEY_INFO_AFTER_LAST,
+@@ -4741,6 +4796,10 @@ enum nl80211_key_attributes {
+ * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
+ * see &struct nl80211_txrate_vht
+ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
++ * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection,
++ * see &struct nl80211_txrate_he
++ * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us.
++ * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF.
+ * @__NL80211_TXRATE_AFTER_LAST: internal
+ * @NL80211_TXRATE_MAX: highest TX rate attribute
+ */
+@@ -4750,6 +4809,9 @@ enum nl80211_tx_rate_attributes {
+ NL80211_TXRATE_HT,
+ NL80211_TXRATE_VHT,
+ NL80211_TXRATE_GI,
++ NL80211_TXRATE_HE,
++ NL80211_TXRATE_HE_GI,
++ NL80211_TXRATE_HE_LTF,
+
+ /* keep last */
+ __NL80211_TXRATE_AFTER_LAST,
+@@ -4767,6 +4829,15 @@ struct nl80211_txrate_vht {
+ __u16 mcs[NL80211_VHT_NSS_MAX];
+ };
+
++#define NL80211_HE_NSS_MAX 8
++/**
++ * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap
++ * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
++ */
++struct nl80211_txrate_he {
++ __u16 mcs[NL80211_HE_NSS_MAX];
++};
++
+ enum nl80211_txrate_gi {
+ NL80211_TXRATE_DEFAULT_GI,
+ NL80211_TXRATE_FORCE_SGI,
+@@ -5821,6 +5892,15 @@ enum nl80211_feature_flags {
+ * handshake with PSK in AP mode (PSK is passed as part of the start AP
+ * command).
+ *
++ * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication
++ * in AP mode (SAE password is passed as part of the start AP command).
++ *
++ * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery
++ * frames transmission
++ *
++ * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
++ * unsolicited broadcast probe response transmission
++ *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+ */
+@@ -5878,6 +5958,9 @@ enum nl80211_ext_feature_index {
+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
+ NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION,
+ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK,
++ NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
++ NL80211_EXT_FEATURE_FILS_DISCOVERY,
++ NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
+
+ /* add new features before the definition below */
+ NUM_NL80211_EXT_FEATURES,
+@@ -5992,6 +6075,8 @@ enum nl80211_timeout_reason {
+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
+ * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means
+ * %NL80211_ATTR_SCAN_FREQUENCIES will not be included.
++ * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by
++ * 2.4/5 GHz APs
+ */
+ enum nl80211_scan_flags {
+ NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
+@@ -6008,6 +6093,7 @@ enum nl80211_scan_flags {
+ NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,
+ NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,
+ NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13,
++ NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14,
+ };
+
+ /**
+@@ -6910,6 +6996,13 @@ enum nl80211_peer_measurement_ftm_resp {
+ *
+ * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
++ * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum
++ * tx power offset.
++ * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color
++ * values used by members of the SRG.
++ * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial
++ * BSSID values used by members of the SRG.
++ * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element.
+ *
+ * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
+ * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
+@@ -6919,6 +7012,10 @@ enum nl80211_obss_pd_attributes {
+
+ NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
+ NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
++ NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET,
++ NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP,
++ NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP,
++ NL80211_HE_OBSS_PD_ATTR_SR_CTRL,
+
+ /* keep last */
+ __NL80211_HE_OBSS_PD_ATTR_LAST,
+@@ -6972,4 +7069,64 @@ enum nl80211_iftype_akm_attributes {
+ NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
+ };
+
++/**
++ * enum nl80211_fils_discovery_attributes - FILS discovery configuration
++ * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail.
++ *
++ * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid
++ *
++ * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).
++ * Allowed range: 0..10000 (TU = Time Unit)
++ * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).
++ * Allowed range: 0..10000 (TU = Time Unit)
++ * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action
++ * frame including the headers.
++ *
++ * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal
++ * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
++ */
++enum nl80211_fils_discovery_attributes {
++ __NL80211_FILS_DISCOVERY_ATTR_INVALID,
++
++ NL80211_FILS_DISCOVERY_ATTR_INT_MIN,
++ NL80211_FILS_DISCOVERY_ATTR_INT_MAX,
++ NL80211_FILS_DISCOVERY_ATTR_TMPL,
++
++ /* keep last */
++ __NL80211_FILS_DISCOVERY_ATTR_LAST,
++ NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1
++};
++
++/*
++ * FILS discovery template minimum length with action frame headers and
++ * mandatory fields.
++ */
++#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42
++
++/**
++ * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe
++ * response configuration. Applicable only in 6GHz.
++ *
++ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid
++ *
++ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).
++ * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0
++ * 26.17.2.3.2 (AP behavior for fast passive scanning).
++ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response
++ * frame template (binary).
++ *
++ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal
++ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute
++ */
++enum nl80211_unsol_bcast_probe_resp_attributes {
++ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID,
++
++ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT,
++ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL,
++
++ /* keep last */
++ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST,
++ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
++ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
++};
+ #endif /* __LINUX_NL80211_H */