aboutsummaryrefslogtreecommitdiffstats
path: root/package/px5g/src/polarssl/rsa.h
diff options
context:
space:
mode:
Diffstat (limited to 'package/px5g/src/polarssl/rsa.h')
-rw-r--r--package/px5g/src/polarssl/rsa.h309
1 files changed, 309 insertions, 0 deletions
diff --git a/package/px5g/src/polarssl/rsa.h b/package/px5g/src/polarssl/rsa.h
new file mode 100644
index 0000000000..b31dc2f144
--- /dev/null
+++ b/package/px5g/src/polarssl/rsa.h
@@ -0,0 +1,309 @@
+/**
+ * \file rsa.h
+ *
+ * Based on XySSL: Copyright (C) 2006-2008 Christophe Devine
+ *
+ * Copyright (C) 2009 Paul Bakker <polarssl_maintainer at polarssl dot org>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the names of PolarSSL or XySSL nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef POLARSSL_RSA_H
+#define POLARSSL_RSA_H
+
+#include "polarssl/bignum.h"
+
+#define POLARSSL_ERR_RSA_BAD_INPUT_DATA -0x0400
+#define POLARSSL_ERR_RSA_INVALID_PADDING -0x0410
+#define POLARSSL_ERR_RSA_KEY_GEN_FAILED -0x0420
+#define POLARSSL_ERR_RSA_KEY_CHECK_FAILED -0x0430
+#define POLARSSL_ERR_RSA_PUBLIC_FAILED -0x0440
+#define POLARSSL_ERR_RSA_PRIVATE_FAILED -0x0450
+#define POLARSSL_ERR_RSA_VERIFY_FAILED -0x0460
+#define POLARSSL_ERR_RSA_OUTPUT_TO_LARGE -0x0470
+
+/*
+ * PKCS#1 constants
+ */
+#define RSA_RAW 0
+#define RSA_MD2 2
+#define RSA_MD4 3
+#define RSA_MD5 4
+#define RSA_SHA1 5
+#define RSA_SHA256 6
+
+#define RSA_PUBLIC 0
+#define RSA_PRIVATE 1
+
+#define RSA_PKCS_V15 0
+#define RSA_PKCS_V21 1
+
+#define RSA_SIGN 1
+#define RSA_CRYPT 2
+
+/*
+ * DigestInfo ::= SEQUENCE {
+ * digestAlgorithm DigestAlgorithmIdentifier,
+ * digest Digest }
+ *
+ * DigestAlgorithmIdentifier ::= AlgorithmIdentifier
+ *
+ * Digest ::= OCTET STRING
+ */
+#define ASN1_HASH_MDX \
+ "\x30\x20\x30\x0C\x06\x08\x2A\x86\x48" \
+ "\x86\xF7\x0D\x02\x00\x05\x00\x04\x10"
+
+#define ASN1_HASH_SHA1 \
+ "\x30\x21\x30\x09\x06\x05\x2B\x0E\x03" \
+ "\x02\x1A\x05\x00\x04\x14"
+
+/**
+ * \brief RSA context structure
+ */
+typedef struct
+{
+ int ver; /*!< always 0 */
+ int len; /*!< size(N) in chars */
+
+ mpi N; /*!< public modulus */
+ mpi E; /*!< public exponent */
+
+ mpi D; /*!< private exponent */
+ mpi P; /*!< 1st prime factor */
+ mpi Q; /*!< 2nd prime factor */
+ mpi DP; /*!< D % (P - 1) */
+ mpi DQ; /*!< D % (Q - 1) */
+ mpi QP; /*!< 1 / (Q % P) */
+
+ mpi RN; /*!< cached R^2 mod N */
+ mpi RP; /*!< cached R^2 mod P */
+ mpi RQ; /*!< cached R^2 mod Q */
+
+ int padding; /*!< 1.5 or OAEP/PSS */
+ int hash_id; /*!< hash identifier */
+ int (*f_rng)(void *); /*!< RNG function */
+ void *p_rng; /*!< RNG parameter */
+}
+rsa_context;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief Initialize an RSA context
+ *
+ * \param ctx RSA context to be initialized
+ * \param padding RSA_PKCS_V15 or RSA_PKCS_V21
+ * \param hash_id RSA_PKCS_V21 hash identifier
+ * \param f_rng RNG function
+ * \param p_rng RNG parameter
+ *
+ * \note The hash_id parameter is actually ignored
+ * when using RSA_PKCS_V15 padding.
+ *
+ * \note Currently (xyssl-0.8), RSA_PKCS_V21 padding
+ * is not supported.
+ */
+void rsa_init( rsa_context *ctx,
+ int padding,
+ int hash_id,
+ int (*f_rng)(void *),
+ void *p_rng );
+
+/**
+ * \brief Generate an RSA keypair
+ *
+ * \param ctx RSA context that will hold the key
+ * \param nbits size of the public key in bits
+ * \param exponent public exponent (e.g., 65537)
+ *
+ * \note rsa_init() must be called beforehand to setup
+ * the RSA context (especially f_rng and p_rng).
+ *
+ * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
+ */
+int rsa_gen_key( rsa_context *ctx, int nbits, int exponent );
+
+/**
+ * \brief Check a public RSA key
+ *
+ * \param ctx RSA context to be checked
+ *
+ * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
+ */
+int rsa_check_pubkey( rsa_context *ctx );
+
+/**
+ * \brief Check a private RSA key
+ *
+ * \param ctx RSA context to be checked
+ *
+ * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
+ */
+int rsa_check_privkey( rsa_context *ctx );
+
+/**
+ * \brief Do an RSA public key operation
+ *
+ * \param ctx RSA context
+ * \param input input buffer
+ * \param output output buffer
+ *
+ * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
+ *
+ * \note This function does NOT take care of message
+ * padding. Also, be sure to set input[0] = 0.
+ *
+ * \note The input and output buffers must be large
+ * enough (eg. 128 bytes if RSA-1024 is used).
+ */
+int rsa_public( rsa_context *ctx,
+ unsigned char *input,
+ unsigned char *output );
+
+/**
+ * \brief Do an RSA private key operation
+ *
+ * \param ctx RSA context
+ * \param input input buffer
+ * \param output output buffer
+ *
+ * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
+ *
+ * \note The input and output buffers must be large
+ * enough (eg. 128 bytes if RSA-1024 is used).
+ */
+int rsa_private( rsa_context *ctx,
+ unsigned char *input,
+ unsigned char *output );
+
+/**
+ * \brief Add the message padding, then do an RSA operation
+ *
+ * \param ctx RSA context
+ * \param mode RSA_PUBLIC or RSA_PRIVATE
+ * \param ilen contains the the plaintext length
+ * \param input buffer holding the data to be encrypted
+ * \param output buffer that will hold the ciphertext
+ *
+ * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
+ *
+ * \note The output buffer must be as large as the size
+ * of ctx->N (eg. 128 bytes if RSA-1024 is used).
+ */
+int rsa_pkcs1_encrypt( rsa_context *ctx,
+ int mode, int ilen,
+ unsigned char *input,
+ unsigned char *output );
+
+/**
+ * \brief Do an RSA operation, then remove the message padding
+ *
+ * \param ctx RSA context
+ * \param mode RSA_PUBLIC or RSA_PRIVATE
+ * \param input buffer holding the encrypted data
+ * \param output buffer that will hold the plaintext
+ * \param olen will contain the plaintext length
+ * \param output_max_len maximum length of the output buffer
+ *
+ * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code
+ *
+ * \note The output buffer must be as large as the size
+ * of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise
+ * an error is thrown.
+ */
+int rsa_pkcs1_decrypt( rsa_context *ctx,
+ int mode, int *olen,
+ unsigned char *input,
+ unsigned char *output,
+ int output_max_len);
+
+/**
+ * \brief Do a private RSA to sign a message digest
+ *
+ * \param ctx RSA context
+ * \param mode RSA_PUBLIC or RSA_PRIVATE
+ * \param hash_id RSA_RAW, RSA_MD{2,4,5} or RSA_SHA{1,256}
+ * \param hashlen message digest length (for RSA_RAW only)
+ * \param hash buffer holding the message digest
+ * \param sig buffer that will hold the ciphertext
+ *
+ * \return 0 if the signing operation was successful,
+ * or an POLARSSL_ERR_RSA_XXX error code
+ *
+ * \note The "sig" buffer must be as large as the size
+ * of ctx->N (eg. 128 bytes if RSA-1024 is used).
+ */
+int rsa_pkcs1_sign( rsa_context *ctx,
+ int mode,
+ int hash_id,
+ int hashlen,
+ unsigned char *hash,
+ unsigned char *sig );
+
+/**
+ * \brief Do a public RSA and check the message digest
+ *
+ * \param ctx points to an RSA public key
+ * \param mode RSA_PUBLIC or RSA_PRIVATE
+ * \param hash_id RSA_RAW, RSA_MD{2,4,5} or RSA_SHA{1,256}
+ * \param hashlen message digest length (for RSA_RAW only)
+ * \param hash buffer holding the message digest
+ * \param sig buffer holding the ciphertext
+ *
+ * \return 0 if the verify operation was successful,
+ * or an POLARSSL_ERR_RSA_XXX error code
+ *
+ * \note The "sig" buffer must be as large as the size
+ * of ctx->N (eg. 128 bytes if RSA-1024 is used).
+ */
+int rsa_pkcs1_verify( rsa_context *ctx,
+ int mode,
+ int hash_id,
+ int hashlen,
+ unsigned char *hash,
+ unsigned char *sig );
+
+/**
+ * \brief Free the components of an RSA key
+ */
+void rsa_free( rsa_context *ctx );
+
+/**
+ * \brief Checkup routine
+ *
+ * \return 0 if successful, or 1 if the test failed
+ */
+int rsa_self_test( int verbose );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* rsa.h */