diff options
Diffstat (limited to 'target/linux/adm5120-2.6')
10 files changed, 148 insertions, 127 deletions
diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch index 70129373f8..8cc60678e0 100644 --- a/target/linux/adm5120-2.6/patches/001-adm5120.patch +++ b/target/linux/adm5120-2.6/patches/001-adm5120.patch @@ -1,10 +1,11 @@ -diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig ---- linux-2.6.19.2/arch/mips/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/arch/mips/Kconfig 2007-01-23 14:49:38.000000000 +0100 -@@ -12,6 +12,21 @@ +Index: linux-2.6.21.1/arch/mips/Kconfig +=================================================================== +--- linux-2.6.21.1.orig/arch/mips/Kconfig ++++ linux-2.6.21.1/arch/mips/Kconfig +@@ -16,6 +16,21 @@ choice prompt "System type" default SGI_IP22 - + +config MIPS_ADM5120 + bool "Support for ADM5120 SoC" + select SYS_HAS_CPU_MIPS32_R1 @@ -23,12 +24,13 @@ diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig config MIPS_MTX1 bool "4G Systems MTX-1 board" select DMA_NONCOHERENT -diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefile ---- linux-2.6.19.2/arch/mips/Makefile 2007-01-23 14:02:57.000000000 +0100 -+++ linux-2.6.19.2.new/arch/mips/Makefile 2007-01-23 14:49:39.000000000 +0100 -@@ -165,6 +165,14 @@ +Index: linux-2.6.21.1/arch/mips/Makefile +=================================================================== +--- linux-2.6.21.1.orig/arch/mips/Makefile ++++ linux-2.6.21.1/arch/mips/Makefile +@@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 - + # +# ADMtek 5120 +# @@ -41,13 +43,14 @@ diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefil # Common Alchemy Au1x00 stuff # core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ -diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h ---- linux-2.6.19.2/include/asm-mips/bootinfo.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h 2007-01-23 14:49:40.000000000 +0100 -@@ -212,6 +212,42 @@ +Index: linux-2.6.21.1/include/asm-mips/bootinfo.h +=================================================================== +--- linux-2.6.21.1.orig/include/asm-mips/bootinfo.h ++++ linux-2.6.21.1/include/asm-mips/bootinfo.h +@@ -213,6 +213,42 @@ #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ - + +/* + * Valid machtype for group ADMtek ADM5120 + */ @@ -85,5 +88,5 @@ diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/ +#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */ + #define CL_SIZE COMMAND_LINE_SIZE - + const char *get_system_type(void); diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch index 503a49567c..c6237c6dd0 100644 --- a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch +++ b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch @@ -1,7 +1,8 @@ -diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig ---- linux-2.6.19.2/drivers/mtd/maps/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -622,5 +622,10 @@ +Index: linux-2.6.21.1/drivers/mtd/maps/Kconfig +=================================================================== +--- linux-2.6.21.1.orig/drivers/mtd/maps/Kconfig ++++ linux-2.6.21.1/drivers/mtd/maps/Kconfig +@@ -605,5 +605,10 @@ config MTD_PLATRAM This selection automatically selects the map_ram driver. @@ -12,10 +13,11 @@ diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers + endmenu -diff -urN linux-2.6.19.2/drivers/mtd/maps/Makefile linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile ---- linux-2.6.19.2/drivers/mtd/maps/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile 2007-01-23 01:20:52.000000000 +0100 -@@ -43,6 +43,7 @@ +Index: linux-2.6.21.1/drivers/mtd/maps/Makefile +=================================================================== +--- linux-2.6.21.1.orig/drivers/mtd/maps/Makefile ++++ linux-2.6.21.1/drivers/mtd/maps/Makefile +@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch index f6fec30bca..cbd28b1aa8 100644 --- a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch +++ b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch @@ -1,7 +1,8 @@ -diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/Kconfig ---- linux-2.6.19.2/drivers/net/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/net/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -450,6 +450,10 @@ +Index: linux-2.6.21.1/drivers/net/Kconfig +=================================================================== +--- linux-2.6.21.1.orig/drivers/net/Kconfig ++++ linux-2.6.21.1/drivers/net/Kconfig +@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET If you have an Alchemy Semi AU1X00 based system say Y. Otherwise, say N. @@ -12,14 +13,15 @@ diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/ config NET_SB1250_MAC tristate "SB1250 Ethernet support" depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC -diff -urN linux-2.6.19.2/drivers/net/Makefile linux-2.6.19.2-adm5120/drivers/net/Makefile ---- linux-2.6.19.2/drivers/net/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/net/Makefile 2007-01-23 01:13:39.000000000 +0100 -@@ -164,6 +164,7 @@ +Index: linux-2.6.21.1/drivers/net/Makefile +=================================================================== +--- linux-2.6.21.1.orig/drivers/net/Makefile ++++ linux-2.6.21.1/drivers/net/Makefile +@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o # This is also a 82596 and should probably be merged obj-$(CONFIG_LP486E) += lp486e.o +obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o obj-$(CONFIG_ETH16I) += eth16i.o - obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o + obj-$(CONFIG_ZORRO8390) += zorro8390.o obj-$(CONFIG_HPLANCE) += hplance.o 7990.o diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch index 6f2ef7bb36..8a6d0205e2 100644 --- a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch +++ b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch @@ -1,10 +1,37 @@ -diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/serial/Kconfig ---- linux-2.6.19.2/drivers/serial/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/serial/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -246,6 +246,22 @@ - +Index: linux-2.6.21.1/drivers/serial/Makefile +=================================================================== +--- linux-2.6.21.1.orig/drivers/serial/Makefile ++++ linux-2.6.21.1/drivers/serial/Makefile +@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) + obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o + obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o + obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o ++obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o + obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o + obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o + obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o +Index: linux-2.6.21.1/include/linux/serial_core.h +=================================================================== +--- linux-2.6.21.1.orig/include/linux/serial_core.h ++++ linux-2.6.21.1/include/linux/serial_core.h +@@ -135,6 +135,9 @@ + /* Xilinx uartlite */ + #define PORT_UARTLITE 74 + ++/* ADMtek ADM5120 SoC */ ++#define PORT_ADM5120 68 ++ + #ifdef __KERNEL__ + + #include <linux/compiler.h> +Index: linux-2.6.21.1/drivers/serial/Kconfig +=================================================================== +--- linux-2.6.21.1.orig/drivers/serial/Kconfig ++++ linux-2.6.21.1/drivers/serial/Kconfig +@@ -256,6 +256,22 @@ config SERIAL_8250_AU1X00 + comment "Non-8250 serial port support" - + +config SERIAL_ADM5120 + bool "ADM5120 serial port support" + depends on MIPS_ADM5120 @@ -22,29 +49,5 @@ diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/s + support. + config SERIAL_AMBA_PL010 - tristate "ARM AMBA PL010 serial port support" - depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) -diff -urN linux-2.6.19.2/drivers/serial/Makefile linux-2.6.19.2-adm5120/drivers/serial/Makefile ---- linux-2.6.19.2/drivers/serial/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/serial/Makefile 2007-01-23 01:21:45.000000000 +0100 -@@ -20,6 +20,7 @@ - obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o - obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o - obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o -+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o - obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o - obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o - obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o -diff -urN linux-2.6.19.2/include/linux/serial_core.h linux-2.6.19.2-adm5120/include/linux/serial_core.h ---- linux-2.6.19.2/include/linux/serial_core.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/include/linux/serial_core.h 2007-01-23 01:13:39.000000000 +0100 -@@ -133,6 +133,9 @@ - #define PORT_S3C2412 73 - - -+/* ADMtek ADM5120 SoC */ -+#define PORT_ADM5120 68 -+ - #ifdef __KERNEL__ - - #include <linux/compiler.h> + tristate "ARM AMBA PL010 serial port support" + depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch index 40e4fbedf4..f48b0f96c3 100644 --- a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch +++ b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch @@ -1,7 +1,8 @@ -diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/usb/core/hub.c ---- linux-2.6.19.2/drivers/usb/core/hub.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/usb/core/hub.c 2007-01-23 01:13:39.000000000 +0100 -@@ -2156,6 +2156,8 @@ +Index: linux-2.6.21.1/drivers/usb/core/hub.c +=================================================================== +--- linux-2.6.21.1.orig/drivers/usb/core/hub.c ++++ linux-2.6.21.1/drivers/usb/core/hub.c +@@ -2227,6 +2227,8 @@ hub_port_init (struct usb_hub *hub, stru USB_DT_DEVICE << 8, 0, buf, GET_DESCRIPTOR_BUFSIZE, (i ? USB_CTRL_GET_TIMEOUT : 1000)); @@ -10,28 +11,31 @@ diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/u switch (buf->bMaxPacketSize0) { case 8: case 16: case 32: case 64: case 255: if (buf->bDescriptorType == -diff -urN linux-2.6.19.2/drivers/usb/host/Kconfig linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig ---- linux-2.6.19.2/drivers/usb/host/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -192,3 +192,6 @@ +Index: linux-2.6.21.1/drivers/usb/host/Kconfig +=================================================================== +--- linux-2.6.21.1.orig/drivers/usb/host/Kconfig ++++ linux-2.6.21.1/drivers/usb/host/Kconfig +@@ -224,3 +224,6 @@ config USB_SL811_CS To compile this driver as a module, choose M here: the module will be called "sl811_cs". +config USB_ADM5120_HCD + tristate "ADM5120 HCD support" + depends on USB && MIPS_ADM5120 -diff -urN linux-2.6.19.2/drivers/usb/host/Makefile linux-2.6.19.2-adm5120/drivers/usb/host/Makefile ---- linux-2.6.19.2/drivers/usb/host/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/usb/host/Makefile 2007-01-23 01:13:39.000000000 +0100 -@@ -16,3 +16,4 @@ +Index: linux-2.6.21.1/drivers/usb/host/Makefile +=================================================================== +--- linux-2.6.21.1.orig/drivers/usb/host/Makefile ++++ linux-2.6.21.1/drivers/usb/host/Makefile +@@ -16,3 +16,4 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o +obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o -diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/Kconfig ---- linux-2.6.19.2/drivers/usb/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/usb/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -91,8 +91,6 @@ +Index: linux-2.6.21.1/drivers/usb/Kconfig +=================================================================== +--- linux-2.6.21.1.orig/drivers/usb/Kconfig ++++ linux-2.6.21.1/drivers/usb/Kconfig +@@ -91,8 +91,6 @@ source "drivers/usb/image/Kconfig" source "drivers/usb/net/Kconfig" @@ -40,10 +44,11 @@ diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/ comment "USB port drivers" depends on USB -diff -urN linux-2.6.19.2/drivers/usb/Makefile linux-2.6.19.2-adm5120/drivers/usb/Makefile ---- linux-2.6.19.2/drivers/usb/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/usb/Makefile 2007-01-23 01:22:18.000000000 +0100 -@@ -17,6 +17,7 @@ +Index: linux-2.6.21.1/drivers/usb/Makefile +=================================================================== +--- linux-2.6.21.1.orig/drivers/usb/Makefile ++++ linux-2.6.21.1/drivers/usb/Makefile +@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_ETRAX_USB_HOST) += host/ obj-$(CONFIG_USB_OHCI_AT91) += host/ diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch b/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch index 593743d7ba..15a5eabf16 100644 --- a/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch +++ b/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch @@ -1,7 +1,8 @@ -diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/char/Kconfig ---- linux-2.6.19.2/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/char/Kconfig 2007-01-23 01:13:39.000000000 +0100 -@@ -1034,7 +1034,9 @@ +Index: linux-2.6.21.1/drivers/char/Kconfig +=================================================================== +--- linux-2.6.21.1.orig/drivers/char/Kconfig ++++ linux-2.6.21.1/drivers/char/Kconfig +@@ -1056,7 +1056,9 @@ config MMTIMER The mmtimer device allows direct userspace access to the Altix system timer. @@ -11,11 +12,12 @@ diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/cha + depends on MIPS_ADM5120 config TELCLOCK - tristate "Telecom clock driver for MPBL0010 ATCA SBC" -diff -urN linux-2.6.19.2/drivers/char/Makefile linux-2.6.19.2-adm5120/drivers/char/Makefile ---- linux-2.6.19.2/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-adm5120/drivers/char/Makefile 2007-01-23 01:20:01.000000000 +0100 -@@ -90,6 +90,7 @@ + tristate "Telecom clock driver for ATCA SBC" +Index: linux-2.6.21.1/drivers/char/Makefile +=================================================================== +--- linux-2.6.21.1.orig/drivers/char/Makefile ++++ linux-2.6.21.1/drivers/char/Makefile +@@ -93,6 +93,7 @@ obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o obj-$(CONFIG_TANBAC_TB0219) += tb0219.o obj-$(CONFIG_TELCLOCK) += tlclk.o diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch index 25ec59a390..1098a24ba8 100644 --- a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch +++ b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch @@ -1,13 +1,16 @@ -diff -urN linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-adm5120/arch/mips/pci/Makefile ---- linux-2.6.21.1/arch/mips/pci/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.21.1-adm5120/arch/mips/pci/Makefile 2007-01-23 14:49:40.000000000 +0100 -@@ -53,3 +53,4 @@ +Index: linux-2.6.21.1/arch/mips/pci/Makefile +=================================================================== +--- linux-2.6.21.1.orig/arch/mips/pci/Makefile ++++ linux-2.6.21.1/arch/mips/pci/Makefile +@@ -53,3 +53,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o +obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o ---- linux-2.6.21.1.old/include/linux/pci_ids.h 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21.1/include/linux/pci_ids.h 2007-05-31 09:36:56.000000000 +0200 +Index: linux-2.6.21.1/include/linux/pci_ids.h +=================================================================== +--- linux-2.6.21.1.orig/include/linux/pci_ids.h ++++ linux-2.6.21.1/include/linux/pci_ids.h @@ -1701,6 +1701,9 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch index 81ec37d05f..88b90454a8 100644 --- a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch +++ b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch @@ -1,7 +1,8 @@ -diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kconfig ---- linux-2.6.19.2/drivers/mtd/Kconfig.old 2007-03-25 08:13:02.000000000 +0200 -+++ linux-2.6.19.2/drivers/mtd/Kconfig 2007-03-26 13:37:47.000000000 +0200 -@@ -157,6 +157,22 @@ +Index: linux-2.6.21.1/drivers/mtd/Kconfig +=================================================================== +--- linux-2.6.21.1.orig/drivers/mtd/Kconfig ++++ linux-2.6.21.1/drivers/mtd/Kconfig +@@ -157,6 +157,22 @@ config MTD_AFS_PARTS for your particular device. It won't happen automatically. The 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. @@ -24,10 +25,11 @@ diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kcon comment "User Modules And Translation Layers" depends on MTD -diff -Nur linux-2.6.19.2/drivers/mtd/Makefile.old linux-2.6.19.2/drivers/mtd/Makefile ---- linux-2.6.19.2/drivers/mtd/Makefile.old 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2/drivers/mtd/Makefile 2007-03-26 13:28:23.000000000 +0200 -@@ -12,6 +12,7 @@ +Index: linux-2.6.21.1/drivers/mtd/Makefile +=================================================================== +--- linux-2.6.21.1.orig/drivers/mtd/Makefile ++++ linux-2.6.21.1/drivers/mtd/Makefile +@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch index 23f377c90b..d5edc23dce 100644 --- a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch +++ b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch @@ -1,7 +1,8 @@ -diff -ur linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S ---- linux.old/arch/mips/kernel/head.S 2006-12-06 17:30:27.000000000 +0100 -+++ linux.dev/arch/mips/kernel/head.S 2006-12-06 18:34:43.000000000 +0100 -@@ -129,15 +129,20 @@ +Index: linux-2.6.21.1/arch/mips/kernel/head.S +=================================================================== +--- linux-2.6.21.1.orig/arch/mips/kernel/head.S ++++ linux-2.6.21.1/arch/mips/kernel/head.S +@@ -129,14 +129,19 @@ #endif .endm @@ -17,11 +18,9 @@ diff -ur linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S + * Use as temporary storage for the kernel command line, so that it + * can be updated easily without having to relink the kernel. */ -- .align 10 + +EXPORT(_image_cmdline) + .ascii "CMDLINE:" -+ .align 10 + .align 10 EXPORT(stext) # used for profiling - EXPORT(_stext) diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch index 05beb20241..8929a73fbb 100644 --- a/target/linux/adm5120-2.6/patches/500-Nand.patch +++ b/target/linux/adm5120-2.6/patches/500-Nand.patch @@ -1,10 +1,10 @@ -diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig -index cfe288a..c528024 100644 ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -55,6 +55,12 @@ config MTD_NAND_TOTO +Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig +=================================================================== +--- linux-2.6.21.1.orig/drivers/mtd/nand/Kconfig ++++ linux-2.6.21.1/drivers/mtd/nand/Kconfig +@@ -75,6 +75,12 @@ config MTD_NAND_TS7250 help - Support for NAND flash on Texas Instruments Toto platform. + Support for NAND flash on Technologic Systems TS-7250 platform. +config MTD_NAND_RB100 + tristate "NAND Flash device on RB100 board" @@ -15,13 +15,13 @@ index cfe288a..c528024 100644 config MTD_NAND_IDS tristate -diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile -index 4174202..2be57c1 100644 ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids. - +Index: linux-2.6.21.1/drivers/mtd/nand/Makefile +=================================================================== +--- linux-2.6.21.1.orig/drivers/mtd/nand/Makefile ++++ linux-2.6.21.1/drivers/mtd/nand/Makefile +@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nan obj-$(CONFIG_MTD_NAND_SPIA) += spia.o + obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o obj-$(CONFIG_MTD_NAND_TOTO) += toto.o +obj-$(CONFIG_MTD_NAND_RB100) += rbmipsnand.o obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o |