aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/adm5120/files-3.18/arch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/adm5120/files-3.18/arch')
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/Kconfig197
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/Platform19
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/Makefile4
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cas-771.c37
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.c147
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.h28
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/nfs-101.c47
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/common/Makefile8
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/common/adm5120.c76
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/common/clock.c65
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/common/early-printk.c31
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/common/gpio.c328
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/common/irq.c171
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/common/memory.c149
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/common/platform.c375
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/common/prom.c264
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/common/setup.c129
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/Makefile5
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.c60
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.h23
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np27g.c28
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np28g.c63
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/wp54.c95
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/Makefile5
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104k.c36
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104kp.c39
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61x4wg.c43
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.c84
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.h23
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/Makefile1
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/eb-214a.c120
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/Makefile6
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-rt.c48
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-wvoip.c24
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120p-ata.c22
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy83000.c23
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.c108
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.h25
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/Makefile8
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-11x.c35
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133.c40
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133c.c36
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-150.c131
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-153.c70
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-192.c27
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.c149
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.h33
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/Makefile1
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/pmugw.c96
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/5gxi.c71
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/Makefile1
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/Makefile10
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/admboot.c55
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/bootbase.c119
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/cfe.c69
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/generic.c47
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/myloader.c68
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/prom_read.h50
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/routerboot.c121
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/Makefile4
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-334wt.c34
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-335.c21
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.c85
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.h22
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h53
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h129
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h63
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h92
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h89
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h87
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h300
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h64
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h56
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h71
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h115
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h43
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h17
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h18
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h18
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h179
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h36
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h86
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h25
-rw-r--r--target/linux/adm5120/files-3.18/arch/mips/pci/pci-adm5120.c277
84 files changed, 0 insertions, 6177 deletions
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files-3.18/arch/mips/adm5120/Kconfig
deleted file mode 100644
index be35a8f72e..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/Kconfig
+++ /dev/null
@@ -1,197 +0,0 @@
-if ADM5120
-
-menu "ADM5120 Board selection"
-
-config ADM5120_MACH_CAS_771
- bool "Cellvision CAS-771/771W support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_CELLVISION
- default y
-
-config ADM5120_MACH_NFS_101
- bool "Cellvision NFS-101U/101WU support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_CELLVISION
- default y
-
-config ADM5120_MACH_NP27G
- bool "Compex NP27G support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_COMPEX
- default y
-
-config ADM5120_MACH_NP28G
- bool "Compex NP28G support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_COMPEX
- default y
-
-config ADM5120_MACH_WP54
- bool "Compex WP54 family support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_COMPEX
- default y
-
-config ADM5120_MACH_EB_214A
- bool "EB-214A support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_GENERIC
- default y
-
-config ADM5120_MACH_BR_6104K
- bool "Edimax BR-6104K support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_OEM_EDIMAX
- default y
-
-config ADM5120_MACH_BR_6104KP
- bool "Edimax BR-6104KP support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_OEM_EDIMAX
- default y
-
-config ADM5120_MACH_BR_61X4WG
- bool "Edimax BR-6104WG/6114WG support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_EDIMAX
- default y
-
-config ADM5120_MACH_EASY5120_RT
- bool "Infineon EASY 5120-RT Reference Board support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_INFINEON
- default y
-
-config ADM5120_MACH_EASY5120_WVOIP
- bool "Infineon EASY 5120-WVoIP Reference Board support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_INFINEON
- default y
-
-config ADM5120_MACH_EASY5120P_ATA
- bool "Infineon EASY 5120P-ATA Reference Board support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_OEM_INFINEON
- default y
-
-config ADM5120_MACH_EASY83000
- bool "Infineon EASY 83000 Reference Board support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_OEM_INFINEON
- default y
-
-config ADM5120_MACH_RB_11X
- bool "MikroTik RouterBOARD 111/112 support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_MIKROTIK
- default y
-
-config ADM5120_MACH_RB_133
- bool "MikroTik RouterBOARD 133 support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_MIKROTIK
- default y
-
-config ADM5120_MACH_RB_133C
- bool "MikroTik RouterBOARD 133C support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_MIKROTIK
- default y
-
-config ADM5120_MACH_RB_150
- bool "MikroTik RouterBOARD 150 support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_OEM_MIKROTIK
- default y
-
-config ADM5120_MACH_RB_153
- bool "MikroTik RouterBOARD 153 support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_MIKROTIK
- default y
-
-config ADM5120_MACH_RB_192
- bool "MikroTik RouterBOARD 192 support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_MIKROTIK
- default y
-
-config ADM5120_MACH_PMUGW
- bool "Motorola Powerline MU Gateway"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_MOTOROLA
- default y
-
-config ADM5120_MACH_5GXI
- bool "OSBRiDGE 5GXi/5XLi support"
- depends on CPU_LITTLE_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_OSBRIDGE
- default y
-
-config ADM5120_MACH_P_334WT
- bool "ZyXEL Prestige 334WT"
- depends on CPU_BIG_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_ZYXEL
- default y
-
-config ADM5120_MACH_P_335
- bool "ZyXEL Prestige 335/335WT"
- depends on CPU_BIG_ENDIAN
- select ADM5120_SOC_BGA
- select ADM5120_OEM_ZYXEL
- default y
-
-endmenu
-
-config ADM5120_SOC_BGA
- select HW_HAS_PCI
- def_bool n
-
-config ADM5120_OEM_CELLVISION
- def_bool n
-
-config ADM5120_OEM_COMPEX
- def_bool n
-
-config ADM5120_OEM_EDIMAX
- def_bool n
-
-config ADM5120_OEM_GENERIC
- def_bool n
-
-config ADM5120_OEM_INFINEON
- def_bool n
-
-config ADM5120_OEM_MIKROTIK
- def_bool n
-
-config ADM5120_OEM_MOTOROLA
- def_bool n
-
-config ADM5120_OEM_OSBRIDGE
- def_bool n
-
-config ADM5120_OEM_ZYXEL
- def_bool n
-
-config ARM_AMBA
- def_bool y
-
-endif
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/Platform b/target/linux/adm5120/files-3.18/arch/mips/adm5120/Platform
deleted file mode 100644
index 0c9edf218b..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/Platform
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Infineon/ADMtek ADM5120
-#
-
-platform-$(CONFIG_ADM5120) += adm5120/common/
-
-platform-$(CONFIG_ADM5120_OEM_CELLVISION) += adm5120/cellvision/
-platform-$(CONFIG_ADM5120_OEM_COMPEX) += adm5120/compex/
-platform-$(CONFIG_ADM5120_OEM_EDIMAX) += adm5120/edimax/
-platform-$(CONFIG_ADM5120_OEM_GENERIC) += adm5120/generic/
-platform-$(CONFIG_ADM5120_OEM_INFINEON) += adm5120/infineon/
-platform-$(CONFIG_ADM5120_OEM_MIKROTIK) += adm5120/mikrotik/
-platform-$(CONFIG_ADM5120_OEM_MOTOROLA) += adm5120/motorola/
-platform-$(CONFIG_ADM5120_OEM_OSBRIDGE) += adm5120/osbridge/
-platform-$(CONFIG_ADM5120_OEM_ZYXEL) += adm5120/zyxel/
-
-cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120
-libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/
-load-$(CONFIG_ADM5120) += 0xffffffff80001000
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/Makefile
deleted file mode 100644
index a949fc9f61..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-obj-y += cellvision.o
-
-obj-$(CONFIG_ADM5120_MACH_CAS_771) += cas-771.o
-obj-$(CONFIG_ADM5120_MACH_NFS_101) += nfs-101.o
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cas-771.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cas-771.c
deleted file mode 100644
index 5033e02469..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cas-771.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Cellvision/SparkLAN CAS-771/771W support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "cellvision.h"
-
-static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
- PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct gpio_led cas771_gpio_leds[] __initdata = {
- GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash", NULL),
- /* GPIO PIN3 is the reset */
- GPIO_LED_STD(ADM5120_GPIO_PIN6, "access", NULL),
- GPIO_LED_STD(ADM5120_GPIO_P0L1, "status", NULL),
- GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag", NULL),
-};
-
-static void __init cas771_setup(void)
-{
- cas7xx_setup();
- adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds),
- cas771_gpio_leds);
- adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_CAS771, "CAS-771", "Cellvision CAS-771/771W",
- cas771_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.c
deleted file mode 100644
index a7cedf03bc..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Cellvision/SparkLAN boards
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "cellvision.h"
-
-#include <prom/admboot.h>
-
-#define CELLVISION_GPIO_FLASH_A20 ADM5120_GPIO_PIN5
-#define CELLVISION_GPIO_DEV_MASK (1 << CELLVISION_GPIO_FLASH_A20)
-
-#define CELLVISION_CONFIG_OFFSET 0x8000
-#define CELLVISION_CONFIG_SIZE 0x1000
-
-static struct mtd_partition cas6xx_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 32*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = 32*1024,
- } , {
- .name = "nvfs1",
- .offset = MTDPART_OFS_APPEND,
- .size = 64*1024,
- } , {
- .name = "nvfs2",
- .offset = MTDPART_OFS_APPEND,
- .size = 64*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition cas7xx_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 32*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = 32*1024,
- } , {
- .name = "nvfs",
- .offset = MTDPART_OFS_APPEND,
- .size = 128*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(CELLVISION_GPIO_FLASH_A20, 0);
- break;
- case 1:
- gpio_set_value(CELLVISION_GPIO_FLASH_A20, 1);
- break;
- }
-}
-
-static void __init cellvision_flash_setup(void)
-{
- /* setup flash A20 line */
- gpio_request(CELLVISION_GPIO_FLASH_A20, NULL);
- gpio_direction_output(CELLVISION_GPIO_FLASH_A20, 0);
-
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_add_device_flash(0);
-}
-
-void __init cellvision_mac_setup(void)
-{
- u8 mac_base[6];
- int err;
-
- err = admboot_get_mac_base(CELLVISION_CONFIG_OFFSET,
- CELLVISION_CONFIG_SIZE, mac_base);
-
- if ((err) || !is_valid_ether_addr(mac_base))
- random_ether_addr(mac_base);
-
- adm5120_setup_eth_macs(mac_base);
-}
-
-void __init cas6xx_flash_setup(void)
-{
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
- adm5120_flash0_data.parts = cas6xx_partitions;
-
- cellvision_flash_setup();
-}
-
-void __init cas7xx_flash_setup(void)
-{
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
- adm5120_flash0_data.parts = cas7xx_partitions;
-
- cellvision_flash_setup();
-}
-
-void __init cas6xx_setup(void)
-{
- cas6xx_flash_setup();
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
- adm5120_add_device_switch(1, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_CAS630, "CAS-630", "Cellvision CAS-630/630W",
- cas6xx_setup);
-MIPS_MACHINE(MACH_ADM5120_CAS670, "CAS-670", "Cellvision CAS-670/670W",
- cas6xx_setup);
-
-void __init cas7xx_setup(void)
-{
- cas7xx_flash_setup();
- cellvision_mac_setup();
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
- adm5120_add_device_switch(1, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_CAS700, "CAS-700", "Cellvision CAS-700/700W",
- cas7xx_setup);
-MIPS_MACHINE(MACH_ADM5120_CAS790, "CAS-790", "Cellvision CAS-790",
- cas7xx_setup);
-MIPS_MACHINE(MACH_ADM5120_CAS861, "CAS-861", "Cellvision CAS-861/861W",
- cas7xx_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.h
deleted file mode 100644
index 2b55ebf761..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Cellvision/SparkLAN boards
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void cellvision_mac_setup(void) __init;
-
-extern void cas6xx_flash_setup(void) __init;
-extern void cas7xx_flash_setup(void) __init;
-extern void cas6xx_setup(void) __init;
-extern void cas7xx_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/nfs-101.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/nfs-101.c
deleted file mode 100644
index 7d214c0909..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/nfs-101.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Cellvision/SparkLAN NFS-101U/WU support
- *
- * Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "cellvision.h"
-
-static struct adm5120_pci_irq nfs101_pci_irqs[] __initdata = {
- /* miniPCI slot */
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-
- /* ALi USB controller */
- PCIIRQ(3, 0, 2, ADM5120_IRQ_PCI2),
- PCIIRQ(3, 3, 1, ADM5120_IRQ_PCI1),
-
- /* NEC USB controller */
- PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
- PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI2),
- PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2),
-};
-
-static u8 nfs101_vlans[6] __initdata = {
- /* FIXME: not tested */
- 0x5f, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init nfs101_setup(void)
-{
- cas6xx_flash_setup();
- cellvision_mac_setup();
-
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
- adm5120_add_device_switch(1, nfs101_vlans);
-
- adm5120_pci_set_irq_map(ARRAY_SIZE(nfs101_pci_irqs),
- nfs101_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_NFS101U, "NFS-101U", "Cellvision NFS-101U/101WU",
- nfs101_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/Makefile
deleted file mode 100644
index 8d302c5931..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Infineon/ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-obj-y := adm5120.o setup.o prom.o irq.o memory.o clock.o \
- gpio.o platform.o
-
-obj-$(CONFIG_EARLY_PRINTK) += early-printk.o
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/adm5120.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/adm5120.c
deleted file mode 100644
index 28388342c6..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/adm5120.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-unsigned int adm5120_product_code;
-unsigned int adm5120_revision;
-unsigned int adm5120_package;
-unsigned int adm5120_nand_boot;
-unsigned long adm5120_speed;
-
-/*
- * CPU settings detection
- */
-#define CODE_GET_PC(c) ((c) & CODE_PC_MASK)
-#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
-#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
-#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
-#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0)
-
-void adm5120_ndelay(u32 ns)
-{
- u32 t;
-
- SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
- SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
-
- t = (ns+640) / 640;
- t &= TIMER_PERIOD_MASK;
- SW_WRITE_REG(SWITCH_REG_TIMER, t | TIMER_TE);
-
- /* wait until the timer expires */
- do {
- t = SW_READ_REG(SWITCH_REG_TIMER_INT);
- } while ((t & TIMER_INT_TOS) == 0);
-
- /* leave the timer disabled */
- SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
- SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
-}
-
-void __init adm5120_soc_init(void)
-{
- u32 code;
- u32 clks;
-
- code = SW_READ_REG(SWITCH_REG_CODE);
-
- adm5120_product_code = CODE_GET_PC(code);
- adm5120_revision = CODE_GET_REV(code);
- adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
- ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
- adm5120_nand_boot = CODE_GET_NAB(code);
-
- clks = CODE_GET_CLKS(code);
- adm5120_speed = ADM5120_SPEED_175;
- if (clks & 1)
- adm5120_speed += 25000000;
- if (clks & 2)
- adm5120_speed += 50000000;
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/clock.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/clock.c
deleted file mode 100644
index 52ae64c419..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/clock.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * ADM5120 minimal CLK API implementation
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was based on the CLK API implementation in:
- * arch/mips/tx4938/toshiba_rbtx4938/setup.c
- * Copyright (C) 2000-2001 Toshiba Corporation
- * 2003-2005 (c) MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-struct clk {
- unsigned long rate;
-};
-
-static struct clk uart_clk = {
- .rate = ADM5120_UART_CLOCK
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- const char *name = dev_name(dev);
-
- if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
- return &uart_clk;
-
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/early-printk.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/early-printk.c
deleted file mode 100644
index d900712639..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/early-printk.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * ADM5120 specific early printk support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/addrspace.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_uart.h>
-
-#define UART_READ(r) \
- __raw_readl((void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
-#define UART_WRITE(r, v) \
- __raw_writel((v), (void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
-
-void __init prom_putchar(char ch)
-{
- while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0)
- ;
- UART_WRITE(UART_REG_DATA, ch);
- while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0)
- ;
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/gpio.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/gpio.c
deleted file mode 100644
index 461ea15e82..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/gpio.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * ADM5120 generic GPIO API support via GPIOLIB
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define GPIO_REG(r) (void __iomem *)(KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-
-struct gpio1_desc {
- void __iomem *reg; /* register address */
- u8 iv_shift; /* shift amount for input bit */
- u8 mode_shift; /* shift amount for mode bits */
-};
-
-#define GPIO1_DESC(p, l) { \
- .reg = GPIO_REG(SWITCH_REG_PORT0_LED + ((p) * 4)), \
- .iv_shift = LED0_IV_SHIFT + (l), \
- .mode_shift = (l) * 4 \
- }
-
-static struct gpio1_desc gpio1_table[15] = {
- GPIO1_DESC(0, 0), GPIO1_DESC(0, 1), GPIO1_DESC(0, 2),
- GPIO1_DESC(1, 0), GPIO1_DESC(1, 1), GPIO1_DESC(1, 2),
- GPIO1_DESC(2, 0), GPIO1_DESC(2, 1), GPIO1_DESC(2, 2),
- GPIO1_DESC(3, 0), GPIO1_DESC(3, 1), GPIO1_DESC(3, 2),
- GPIO1_DESC(4, 0), GPIO1_DESC(4, 1), GPIO1_DESC(4, 2)
-};
-
-static u32 gpio_conf2;
-
-int adm5120_gpio_to_irq(unsigned gpio)
-{
- int ret;
-
- switch (gpio) {
- case ADM5120_GPIO_PIN2:
- ret = ADM5120_IRQ_GPIO2;
- break;
- case ADM5120_GPIO_PIN4:
- ret = ADM5120_IRQ_GPIO4;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-EXPORT_SYMBOL(adm5120_gpio_to_irq);
-
-int adm5120_irq_to_gpio(unsigned irq)
-{
- int ret;
-
- switch (irq) {
- case ADM5120_IRQ_GPIO2:
- ret = ADM5120_GPIO_PIN2;
- break;
- case ADM5120_IRQ_GPIO4:
- ret = ADM5120_GPIO_PIN4;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-EXPORT_SYMBOL(adm5120_irq_to_gpio);
-
-/*
- * Helpers for GPIO lines in GPIO_CONF0 register
- */
-#define PIN_IM(p) ((1 << GPIO_CONF0_IM_SHIFT) << p)
-#define PIN_IV(p) ((1 << GPIO_CONF0_IV_SHIFT) << p)
-#define PIN_OE(p) ((1 << GPIO_CONF0_OE_SHIFT) << p)
-#define PIN_OV(p) ((1 << GPIO_CONF0_OV_SHIFT) << p)
-
-int __adm5120_gpio0_get_value(unsigned offset)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- if ((t & PIN_IM(offset)) != 0)
- t &= PIN_IV(offset);
- else
- t &= PIN_OV(offset);
-
- return (t) ? 1 : 0;
-}
-EXPORT_SYMBOL(__adm5120_gpio0_get_value);
-
-void __adm5120_gpio0_set_value(unsigned offset, int value)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- if (value == 0)
- t &= ~(PIN_OV(offset));
- else
- t |= PIN_OV(offset);
-
- __raw_writel(t, reg);
-}
-EXPORT_SYMBOL(__adm5120_gpio0_set_value);
-
-static int adm5120_gpio0_get_value(struct gpio_chip *chip, unsigned offset)
-{
- return __adm5120_gpio0_get_value(offset);
-}
-
-static void adm5120_gpio0_set_value(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- __adm5120_gpio0_set_value(offset, value);
-}
-
-static int adm5120_gpio0_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- t &= ~(PIN_OE(offset));
- t |= PIN_IM(offset);
- __raw_writel(t, reg);
-
- return 0;
-}
-
-static int adm5120_gpio0_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- void __iomem **reg;
- u32 t;
-
- reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
- t = __raw_readl(reg);
- t &= ~(PIN_IM(offset) | PIN_OV(offset));
- t |= PIN_OE(offset);
-
- if (value)
- t |= PIN_OV(offset);
-
- __raw_writel(t, reg);
-
- return 0;
-}
-
-static struct gpio_chip adm5120_gpio0_chip = {
- .label = "adm5120 gpio0",
- .get = adm5120_gpio0_get_value,
- .set = adm5120_gpio0_set_value,
- .direction_input = adm5120_gpio0_direction_input,
- .direction_output = adm5120_gpio0_direction_output,
- .base = ADM5120_GPIO_PIN0,
- .ngpio = ADM5120_GPIO_PIN7 - ADM5120_GPIO_PIN0 + 1,
-};
-
-int __adm5120_gpio1_get_value(unsigned offset)
-{
- void __iomem **reg;
- u32 t, m;
-
- reg = gpio1_table[offset].reg;
-
- t = __raw_readl(reg);
- m = (t >> gpio1_table[offset].mode_shift) & LED_MODE_MASK;
- if (m == LED_MODE_INPUT)
- return (t >> gpio1_table[offset].iv_shift) & 1;
-
- if (m == LED_MODE_OUT_LOW)
- return 0;
-
- return 1;
-}
-EXPORT_SYMBOL(__adm5120_gpio1_get_value);
-
-void __adm5120_gpio1_set_value(unsigned offset, int value)
-{
- void __iomem **reg;
- u32 t, s;
-
- reg = gpio1_table[offset].reg;
- s = gpio1_table[offset].mode_shift;
-
- t = __raw_readl(reg);
- t &= ~(LED_MODE_MASK << s);
-
- switch (value) {
- case ADM5120_GPIO_LOW:
- t |= (LED_MODE_OUT_LOW << s);
- break;
- case ADM5120_GPIO_FLASH:
- case ADM5120_GPIO_LINK:
- case ADM5120_GPIO_SPEED:
- case ADM5120_GPIO_DUPLEX:
- case ADM5120_GPIO_ACT:
- case ADM5120_GPIO_COLL:
- case ADM5120_GPIO_LINK_ACT:
- case ADM5120_GPIO_DUPLEX_COLL:
- case ADM5120_GPIO_10M_ACT:
- case ADM5120_GPIO_100M_ACT:
- t |= ((value & LED_MODE_MASK) << s);
- break;
- default:
- t |= (LED_MODE_OUT_HIGH << s);
- break;
- }
-
- __raw_writel(t, reg);
-}
-EXPORT_SYMBOL(__adm5120_gpio1_set_value);
-
-static int adm5120_gpio1_get_value(struct gpio_chip *chip, unsigned offset)
-{
- return __adm5120_gpio1_get_value(offset);
-}
-
-static void adm5120_gpio1_set_value(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- __adm5120_gpio1_set_value(offset, value);
-}
-
-static int adm5120_gpio1_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- void __iomem **reg;
- u32 t;
-
- reg = gpio1_table[offset].reg;
- t = __raw_readl(reg);
- t &= ~(LED_MODE_MASK << gpio1_table[offset].mode_shift);
- __raw_writel(t, reg);
-
- return 0;
-}
-
-static int adm5120_gpio1_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- __adm5120_gpio1_set_value(offset, value);
- return 0;
-}
-
-static struct gpio_chip adm5120_gpio1_chip = {
- .label = "adm5120 gpio1",
- .get = adm5120_gpio1_get_value,
- .set = adm5120_gpio1_set_value,
- .direction_input = adm5120_gpio1_direction_input,
- .direction_output = adm5120_gpio1_direction_output,
- .base = ADM5120_GPIO_P0L0,
- .ngpio = ADM5120_GPIO_P4L2 - ADM5120_GPIO_P0L0 + 1,
-};
-
-void __init adm5120_gpio_csx0_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_CSX0;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- gpio_request(ADM5120_GPIO_PIN1, "CSX0");
-}
-
-void __init adm5120_gpio_csx1_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_CSX1;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- gpio_request(ADM5120_GPIO_PIN3, "CSX1");
-}
-
-void __init adm5120_gpio_ew_enable(void)
-{
- gpio_conf2 |= GPIO_CONF2_EW;
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- gpio_request(ADM5120_GPIO_PIN0, "EW");
-}
-
-void __init adm5120_gpio_init(void)
-{
- int err;
-
- SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
- if (adm5120_package_pqfp())
- adm5120_gpio0_chip.ngpio = 4;
-
- err = gpiochip_add(&adm5120_gpio0_chip);
- if (err)
- panic("cannot add ADM5120 GPIO0 chip, error=%d", err);
-
- err = gpiochip_add(&adm5120_gpio1_chip);
- if (err)
- panic("cannot add ADM5120 GPIO1 chip, error=%d", err);
-
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/irq.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/irq.c
deleted file mode 100644
index a26e65176e..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/irq.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * ADM5120 specific interrupt handlers
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-static void adm5120_intc_irq_unmask(struct irq_data *d);
-static void adm5120_intc_irq_mask(struct irq_data *d);
-static int adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type);
-
-static inline void intc_write_reg(unsigned int reg, u32 val)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
-
- __raw_writel(val, base + reg);
-}
-
-static inline u32 intc_read_reg(unsigned int reg)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
-
- return __raw_readl(base + reg);
-}
-
-static struct irq_chip adm5120_intc_irq_chip = {
- .name = "INTC",
- .irq_unmask = adm5120_intc_irq_unmask,
- .irq_mask = adm5120_intc_irq_mask,
- .irq_mask_ack = adm5120_intc_irq_mask,
- .irq_set_type = adm5120_intc_irq_set_type
-};
-
-static struct irqaction adm5120_intc_irq_action = {
- .handler = no_action,
- .name = "cascade [INTC]"
-};
-
-static void adm5120_intc_irq_unmask(struct irq_data *d)
-{
- intc_write_reg(INTC_REG_IRQ_ENABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE));
-}
-
-static void adm5120_intc_irq_mask(struct irq_data *d)
-{
- intc_write_reg(INTC_REG_IRQ_DISABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE));
-}
-
-static int adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
- unsigned int irq = d->irq;
- unsigned int sense;
- unsigned long mode;
- int err = 0;
-
- sense = flow_type & (IRQ_TYPE_SENSE_MASK);
- switch (sense) {
- case IRQ_TYPE_NONE:
- case IRQ_TYPE_LEVEL_HIGH:
- break;
- case IRQ_TYPE_LEVEL_LOW:
- switch (irq) {
- case ADM5120_IRQ_GPIO2:
- case ADM5120_IRQ_GPIO4:
- break;
- default:
- err = -EINVAL;
- break;
- }
- break;
- default:
- err = -EINVAL;
- break;
- }
-
- if (err)
- return err;
-
- switch (irq) {
- case ADM5120_IRQ_GPIO2:
- case ADM5120_IRQ_GPIO4:
- mode = intc_read_reg(INTC_REG_INT_MODE);
- if (sense == IRQ_TYPE_LEVEL_LOW)
- mode |= (1 << (irq - ADM5120_INTC_IRQ_BASE));
- else
- mode &= ~(1 << (irq - ADM5120_INTC_IRQ_BASE));
-
- intc_write_reg(INTC_REG_INT_MODE, mode);
- break;
- }
-
- return 0;
-}
-
-static void adm5120_intc_irq_dispatch(void)
-{
- unsigned long status;
- int irq;
-
- status = intc_read_reg(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
- if (status) {
- irq = ADM5120_INTC_IRQ_BASE + fls(status) - 1;
- do_IRQ(irq);
- } else
- spurious_interrupt();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned long pending;
-
- pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
- if (pending & STATUSF_IP7)
- do_IRQ(ADM5120_IRQ_COUNTER);
- else if (pending & STATUSF_IP2)
- adm5120_intc_irq_dispatch();
- else
- spurious_interrupt();
-}
-
-#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
-static void __init adm5120_intc_irq_init(void)
-{
- int i;
-
- /* disable all interrupts */
- intc_write_reg(INTC_REG_IRQ_DISABLE, INTC_INT_ALL);
-
- /* setup all interrupts to generate IRQ instead of FIQ */
- intc_write_reg(INTC_REG_INT_MODE, 0);
-
- /* set active level for all external interrupts to HIGH */
- intc_write_reg(INTC_REG_INT_LEVEL, 0);
-
- /* disable usage of the TEST_SOURCE register */
- intc_write_reg(INTC_REG_IRQ_SOURCE_SELECT, 0);
-
- for (i = ADM5120_INTC_IRQ_BASE;
- i <= ADM5120_INTC_IRQ_BASE + INTC_IRQ_LAST;
- i++) {
- irq_set_chip_and_handler(i, &adm5120_intc_irq_chip,
- handle_level_irq);
- }
-
- setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action);
-}
-
-void __init arch_init_irq(void)
-{
- mips_cpu_irq_init();
- adm5120_intc_irq_init();
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/memory.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/memory.c
deleted file mode 100644
index d07266fa38..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/memory.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_mpmc.h>
-
-#ifdef DEBUG
-# define mem_dbg(f, a...) printk(KERN_INFO "mem_detect: " f, ## a)
-#else
-# define mem_dbg(f, a...)
-#endif
-
-unsigned long adm5120_memsize;
-
-#define MEM_READL(a) __raw_readl((void __iomem *)(a))
-#define MEM_WRITEL(a, v) __raw_writel((v), (void __iomem *)(a))
-
-static int __init mem_check_pattern(u8 *addr, unsigned long offs)
-{
- u32 *p1 = (u32 *)addr;
- u32 *p2 = (u32 *)(addr+offs);
- u32 t, u, v;
-
- /* save original value */
- t = MEM_READL(p1);
-
- u = MEM_READL(p2);
- if (t != u)
- return 0;
-
- v = 0x55555555;
- if (u == v)
- v = 0xAAAAAAAA;
-
- mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1);
-
- MEM_WRITEL(p1, v);
- adm5120_ndelay(1000);
- u = MEM_READL(p2);
-
- mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u);
-
- /* restore original value */
- MEM_WRITEL(p1, t);
-
- return (v == u);
-}
-
-static void __init adm5120_detect_memsize(void)
-{
- u32 memctrl;
- u32 size, maxsize;
- u8 *p;
-
- memctrl = SW_READ_REG(SWITCH_REG_MEMCTRL);
- switch (memctrl & MEMCTRL_SDRS_MASK) {
- case MEMCTRL_SDRS_4M:
- maxsize = 4 << 20;
- break;
- case MEMCTRL_SDRS_8M:
- maxsize = 8 << 20;
- break;
- case MEMCTRL_SDRS_16M:
- maxsize = 16 << 20;
- break;
- default:
- maxsize = 64 << 20;
- break;
- }
-
- mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20);
-
- /* detect size of the 1st SDRAM bank */
- p = (u8 *)KSEG1ADDR(0);
- for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
- if (mem_check_pattern(p, size)) {
- /* mirrored address */
- mem_dbg("mirrored data found at offset 0x%08X\n", size);
- break;
- }
- }
-
- mem_dbg("chip size in 1st bank is %uMB\n", size >> 20);
- adm5120_memsize = size;
-
- if (size != maxsize)
- /* 2nd bank is not supported */
- goto out;
-
- if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
- /* 2nd bank is disabled */
- goto out;
-
- /*
- * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
- * are missing.
- */
- mem_dbg("check presence of 2nd bank\n");
-
- p = (u8 *)KSEG1ADDR(maxsize+size-4);
- if (mem_check_pattern(p, 0))
- adm5120_memsize += size;
-
- if (maxsize != size) {
- /* adjusting MECTRL register */
- memctrl &= ~(MEMCTRL_SDRS_MASK);
- switch (size>>20) {
- case 4:
- memctrl |= MEMCTRL_SDRS_4M;
- break;
- case 8:
- memctrl |= MEMCTRL_SDRS_8M;
- break;
- case 16:
- memctrl |= MEMCTRL_SDRS_16M;
- break;
- default:
- memctrl |= MEMCTRL_SDRS_64M;
- break;
- }
- SW_WRITE_REG(SWITCH_REG_MEMCTRL, memctrl);
- }
-
-out:
- mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
- size>>20);
-}
-
-void __init adm5120_mem_init(void)
-{
- adm5120_detect_memsize();
- add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM);
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/platform.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/platform.c
deleted file mode 100644
index bdbfbcbae5..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/platform.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * ADM5120 generic platform devices
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_nand.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#if 1
-/*
- * TODO:remove global adm5120_eth* variables when the switch driver will be
- * converted into a real platform driver
- */
-unsigned int adm5120_eth_num_ports = 6;
-EXPORT_SYMBOL_GPL(adm5120_eth_num_ports);
-
-unsigned char adm5120_eth_macs[6][6] = {
- {'\00', 'A', 'D', 'M', '\x51', '\x20' },
- {'\00', 'A', 'D', 'M', '\x51', '\x21' },
- {'\00', 'A', 'D', 'M', '\x51', '\x22' },
- {'\00', 'A', 'D', 'M', '\x51', '\x23' },
- {'\00', 'A', 'D', 'M', '\x51', '\x24' },
- {'\00', 'A', 'D', 'M', '\x51', '\x25' }
-};
-EXPORT_SYMBOL_GPL(adm5120_eth_macs);
-
-unsigned char adm5120_eth_vlans[6] = {
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x60
-};
-EXPORT_SYMBOL_GPL(adm5120_eth_vlans);
-#endif
-
-void __init adm5120_setup_eth_macs(u8 *mac_base)
-{
- u32 t;
- int i, j;
-
- t = ((u32) mac_base[3] << 16) | ((u32) mac_base[4] << 8)
- | ((u32) mac_base[5]);
-
- for (i = 0; i < ARRAY_SIZE(adm5120_eth_macs); i++) {
- for (j = 0; j < 3; j++)
- adm5120_eth_macs[i][j] = mac_base[j];
-
- adm5120_eth_macs[i][3] = (t >> 16) & 0xff;
- adm5120_eth_macs[i][4] = (t >> 8) & 0xff;
- adm5120_eth_macs[i][5] = t & 0xff;
-
- t++;
- }
-}
-
-/*
- * Built-in ethernet switch
- */
-struct resource adm5120_switch_resources[] = {
- [0] = {
- .start = ADM5120_SWITCH_BASE,
- .end = ADM5120_SWITCH_BASE+ADM5120_SWITCH_SIZE-1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ADM5120_IRQ_SWITCH,
- .end = ADM5120_IRQ_SWITCH,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct adm5120_switch_platform_data adm5120_switch_data;
-struct platform_device adm5120_switch_device = {
- .name = "adm5120-switch",
- .id = -1,
- .num_resources = ARRAY_SIZE(adm5120_switch_resources),
- .resource = adm5120_switch_resources,
- .dev.platform_data = &adm5120_switch_data,
-};
-
-void __init adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map)
-{
- if (num_ports > 0)
- adm5120_eth_num_ports = num_ports;
-
- if (vlan_map)
- memcpy(adm5120_eth_vlans, vlan_map, sizeof(adm5120_eth_vlans));
-
- platform_device_register(&adm5120_switch_device);
-}
-
-/*
- * USB Host Controller
- */
-struct resource adm5120_hcd_resources[] = {
- [0] = {
- .start = ADM5120_USBC_BASE,
- .end = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ADM5120_IRQ_USBC,
- .end = ADM5120_IRQ_USBC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 adm5120_hcd_dma_mask = DMA_BIT_MASK(24);
-struct platform_device adm5120_hcd_device = {
- .name = "adm5120-hcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(adm5120_hcd_resources),
- .resource = adm5120_hcd_resources,
- .dev = {
- .dma_mask = &adm5120_hcd_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(24),
- }
-};
-
-void __init adm5120_add_device_usb(void)
-{
- platform_device_register(&adm5120_hcd_device);
-}
-
-/*
- * NOR flash devices
- */
-struct adm5120_flash_platform_data adm5120_flash0_data;
-struct platform_device adm5120_flash0_device = {
- .name = "adm5120-flash",
- .id = 0,
- .dev.platform_data = &adm5120_flash0_data,
-};
-
-struct adm5120_flash_platform_data adm5120_flash1_data;
-struct platform_device adm5120_flash1_device = {
- .name = "adm5120-flash",
- .id = 1,
- .dev.platform_data = &adm5120_flash1_data,
-};
-
-void __init adm5120_add_device_flash(unsigned id)
-{
- struct platform_device *pdev;
-
- switch (id) {
- case 0:
- pdev = &adm5120_flash0_device;
- break;
- case 1:
- pdev = &adm5120_flash1_device;
- break;
- default:
- pdev = NULL;
- break;
- }
-
- if (pdev)
- platform_device_register(pdev);
-}
-
-/*
- * built-in UARTs
- */
-static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
- unsigned int mctrl)
-{
-}
-
-struct amba_pl010_data adm5120_uart0_data = {
- .set_mctrl = adm5120_uart_set_mctrl
-};
-
-struct amba_device adm5120_uart0_device = {
- .dev = {
- .init_name = "apb:uart0",
- .platform_data = &adm5120_uart0_data,
- },
- .res = {
- .start = ADM5120_UART0_BASE,
- .end = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { ADM5120_IRQ_UART0, 0 },
- .periphid = 0x0041010,
-};
-
-struct amba_pl010_data adm5120_uart1_data = {
- .set_mctrl = adm5120_uart_set_mctrl
-};
-
-struct amba_device adm5120_uart1_device = {
- .dev = {
- .init_name = "apb:uart1",
- .platform_data = &adm5120_uart1_data,
- },
- .res = {
- .start = ADM5120_UART1_BASE,
- .end = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { ADM5120_IRQ_UART1, 0 },
- .periphid = 0x0041010,
-};
-
-void __init adm5120_add_device_uart(unsigned id)
-{
- struct amba_device *dev;
-
- switch (id) {
- case 0:
- dev = &adm5120_uart0_device;
- break;
- case 1:
- dev = &adm5120_uart1_device;
- break;
- default:
- dev = NULL;
- break;
- }
-
- if (dev)
- amba_device_register(dev, &iomem_resource);
-}
-
-/*
- * GPIO buttons
- */
-void __init adm5120_register_gpio_buttons(int id,
- unsigned poll_interval,
- unsigned nbuttons,
- struct gpio_keys_button *buttons)
-{
- struct platform_device *pdev;
- struct gpio_keys_platform_data pdata;
- struct gpio_keys_button *p;
- int err;
-
- p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
- if (!p)
- return;
-
- pdev = platform_device_alloc("gpio-keys-polled", id);
- if (!pdev)
- goto err_free_buttons;
-
- memset(&pdata, 0, sizeof(pdata));
- pdata.poll_interval = poll_interval;
- pdata.nbuttons = nbuttons;
- pdata.buttons = p;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto err_put_pdev;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put_pdev;
-
- return;
-
-err_put_pdev:
- platform_device_put(pdev);
-
-err_free_buttons:
- kfree(p);
-}
-
-/*
- * GPIO LEDS
- */
-struct gpio_led_platform_data adm5120_gpio_leds_data;
-struct platform_device adm5120_gpio_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev.platform_data = &adm5120_gpio_leds_data,
-};
-
-void __init adm5120_add_device_gpio_leds(unsigned num_leds,
- struct gpio_led *leds)
-{
- struct gpio_led *p;
-
- p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
- if (!p)
- return;
-
- memcpy(p, leds, num_leds * sizeof(*p));
- adm5120_gpio_leds_data.num_leds = num_leds;
- adm5120_gpio_leds_data.leds = p;
-
- platform_device_register(&adm5120_gpio_leds_device);
-}
-
-/*
- * NAND flash
- */
-struct resource adm5120_nand_resources[] = {
- [0] = {
- .start = ADM5120_NAND_BASE,
- .end = ADM5120_NAND_BASE + ADM5120_NAND_SIZE-1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int adm5120_nand_ready(struct mtd_info *mtd)
-{
- return ((adm5120_nand_get_status() & ADM5120_NAND_STATUS_READY) != 0);
-}
-
-static void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- if (ctrl & NAND_CTRL_CHANGE) {
- adm5120_nand_set_cle(ctrl & NAND_CLE);
- adm5120_nand_set_ale(ctrl & NAND_ALE);
- adm5120_nand_set_cen(ctrl & NAND_NCE);
- }
-
- if (cmd != NAND_CMD_NONE)
- NAND_WRITE_REG(NAND_REG_DATA, cmd);
-}
-
-void __init adm5120_add_device_nand(struct platform_nand_data *pdata)
-{
- struct platform_device *pdev;
- int err;
-
- pdev = platform_device_alloc("gen_nand", -1);
- if (!pdev)
- goto err_out;
-
- err = platform_device_add_resources(pdev, adm5120_nand_resources,
- ARRAY_SIZE(adm5120_nand_resources));
- if (err)
- goto err_put;
-
- err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
- if (err)
- goto err_put;
-
- pdata = pdev->dev.platform_data;
- pdata->ctrl.dev_ready = adm5120_nand_ready;
- pdata->ctrl.cmd_ctrl = adm5120_nand_cmd_ctrl;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put;
-
- return;
-
-err_put:
- platform_device_put(pdev);
-err_out:
- return;
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/prom.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/prom.c
deleted file mode 100644
index 5c52ea27e2..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/prom.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * ADM5120 specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-
-#include <prom/cfe.h>
-#include <prom/generic.h>
-#include <prom/routerboot.h>
-#include <prom/myloader.h>
-#include <prom/zynos.h>
-
-unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC;
-
-struct board_desc {
- unsigned long mach_type;
- char *name;
-};
-
-#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)}
-static struct board_desc common_boards[] __initdata = {
- /* Cellvision/SparkLAN boards */
- DEFBOARD("CAS-630", MACH_ADM5120_CAS630),
- DEFBOARD("CAS-670", MACH_ADM5120_CAS670),
- DEFBOARD("CAS-700", MACH_ADM5120_CAS700),
- DEFBOARD("CAS-771", MACH_ADM5120_CAS771),
- DEFBOARD("CAS-790", MACH_ADM5120_CAS790),
- DEFBOARD("CAS-861", MACH_ADM5120_CAS861),
- DEFBOARD("NFS-101U", MACH_ADM5120_NFS101U),
- /* Compex boards */
- DEFBOARD("WP54G-WRT", MACH_ADM5120_WP54G_WRT),
- /* Edimax boards */
- DEFBOARD("BR-6104K", MACH_ADM5120_BR6104K),
- DEFBOARD("BR-6104KP", MACH_ADM5120_BR6104KP),
- DEFBOARD("BR-6104WG", MACH_ADM5120_BR61X4WG),
- DEFBOARD("BR-6114WG", MACH_ADM5120_BR61X4WG),
- /* Infineon boards */
- DEFBOARD("EASY 5120P-ATA", MACH_ADM5120_EASY5120PATA),
- DEFBOARD("EASY 5120-RT", MACH_ADM5120_EASY5120RT),
- DEFBOARD("EASY 5120-WVoIP", MACH_ADM5120_EASY5120WVOIP),
- DEFBOARD("EASY 83000", MACH_ADM5120_EASY83000),
- /* Mikrotik RouterBOARDs */
- DEFBOARD("111", MACH_ADM5120_RB_11X),
- DEFBOARD("112", MACH_ADM5120_RB_11X),
- DEFBOARD("133", MACH_ADM5120_RB_133),
- DEFBOARD("133C", MACH_ADM5120_RB_133C),
- DEFBOARD("133C3", MACH_ADM5120_RB_133C),
- DEFBOARD("150", MACH_ADM5120_RB_153), /* it's intentional */
- DEFBOARD("153", MACH_ADM5120_RB_153),
- DEFBOARD("192", MACH_ADM5120_RB_192),
- DEFBOARD("miniROUTER", MACH_ADM5120_RB_150),
- /* OSBRiDGE boards */
- DEFBOARD("OSBRiDGE 5GXi", MACH_ADM5120_5GXI),
- /* Motorola boards */
- DEFBOARD("Powerline MU Gateway", MACH_ADM5120_PMUGW),
- /* Generic EB-214A */
- DEFBOARD("ADM5120", MACH_ADM5120_EB_214A),
-};
-
-static unsigned long __init find_machtype_byname(char *name)
-{
- unsigned long ret;
- int i;
-
- ret = MACH_ADM5120_GENERIC;
- if (name == NULL)
- goto out;
-
- if (*name == '\0')
- goto out;
-
- for (i = 0; i < ARRAY_SIZE(common_boards); i++) {
- if (strcmp(common_boards[i].name, name) == 0) {
- ret = common_boards[i].mach_type;
- break;
- }
- }
-
-out:
- return ret;
-}
-
-static unsigned long __init detect_machtype_routerboot(void)
-{
- char *name;
-
- name = routerboot_get_boardname();
- return find_machtype_byname(name);
-}
-
-static unsigned long __init detect_machtype_generic(void)
-{
- char *name;
-
- name = generic_prom_getenv("board_name");
- return find_machtype_byname(name);
-}
-
-unsigned long __init detect_machtype_cfe(void)
-{
- char *name;
-
- name = cfe_getenv("BOARD_NAME");
- return find_machtype_byname(name);
-}
-
-static struct {
- unsigned long mach_type;
- u16 vendor_id;
- u16 board_id;
-} zynos_boards[] __initdata = {
-#define ZYNOS_BOARD(vi, bi, mt) \
- {.vendor_id = (vi), .board_id = (bi), .mach_type = (mt)}
-
-#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
-#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
-#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
- ZYXEL_BOARD(ZYNOS_BOARD_HS100, MACH_ADM5120_HS100),
- ZYXEL_BOARD(ZYNOS_BOARD_P334U, MACH_ADM5120_P334U),
- ZYXEL_BOARD(ZYNOS_BOARD_P334W, MACH_ADM5120_P334W),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WH, MACH_ADM5120_P334WH),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WT, MACH_ADM5120_P334WT),
- ZYXEL_BOARD(ZYNOS_BOARD_P334WT_ALT, MACH_ADM5120_P334WT),
- ZYXEL_BOARD(ZYNOS_BOARD_P335, MACH_ADM5120_P335),
- ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
- ZYXEL_BOARD(ZYNOS_BOARD_P335U, MACH_ADM5120_P335U)
-};
-
-static unsigned long __init detect_machtype_bootbase(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(zynos_boards); i++) {
- if (zynos_boards[i].vendor_id == bootbase_info.vendor_id &&
- zynos_boards[i].board_id == bootbase_info.board_id) {
- return zynos_boards[i].mach_type;
- break;
- }
- }
-
- printk(KERN_WARNING "Unknown ZyXEL model (%u)\n",
- bootbase_info.board_id);
- return MACH_ADM5120_GENERIC;
-}
-
-static struct {
- unsigned long mach_type;
- u16 vid;
- u16 did;
- u16 svid;
- u16 sdid;
-} mylo_boards[] __initdata = {
-#define MYLO_BOARD(v, d, sv, sd, mt) \
- {.vid = (v), .did = (d), .svid = (sv), .sdid = (sd), .mach_type = (mt)}
-#define COMPEX_BOARD(d, mt) \
- MYLO_BOARD(VENID_COMPEX, (d), VENID_COMPEX, (d), (mt))
-
- COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
- COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
- COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
- COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54),
- COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
- COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54),
- COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WP54),
- COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WP54),
-};
-
-static unsigned long __init detect_machtype_myloader(void)
-{
- unsigned long ret;
- int i;
-
- ret = MACH_ADM5120_GENERIC;
- for (i = 0; i < ARRAY_SIZE(mylo_boards); i++) {
- if (mylo_boards[i].vid == myloader_info.vid &&
- mylo_boards[i].did == myloader_info.did &&
- mylo_boards[i].svid == myloader_info.svid &&
- mylo_boards[i].sdid == myloader_info.sdid) {
- ret = mylo_boards[i].mach_type;
- break;
- }
- }
-
- return ret;
-}
-
-static void __init prom_detect_machtype(void)
-{
- if (bootbase_present()) {
- adm5120_prom_type = ADM5120_PROM_BOOTBASE;
- mips_machtype = detect_machtype_bootbase();
- return;
- }
-
- if (cfe_present()) {
- adm5120_prom_type = ADM5120_PROM_CFE;
- mips_machtype = detect_machtype_cfe();
- return;
- }
-
- if (myloader_present()) {
- adm5120_prom_type = ADM5120_PROM_MYLOADER;
- mips_machtype = detect_machtype_myloader();
- return;
- }
-
- if (routerboot_present()) {
- adm5120_prom_type = ADM5120_PROM_ROUTERBOOT;
- mips_machtype = detect_machtype_routerboot();
- return;
- }
-
- if (generic_prom_present()) {
- adm5120_prom_type = ADM5120_PROM_GENERIC;
- mips_machtype = detect_machtype_generic();
- return;
- }
-
- mips_machtype = MACH_ADM5120_GENERIC;
-}
-
-#ifdef CONFIG_IMAGE_CMDLINE_HACK
-extern char __image_cmdline[];
-
-static void __init prom_init_cmdline(void)
-{
- char *cmd;
-
- /* init command line, register a default kernel command line */
- cmd = __image_cmdline;
- if (strlen(cmd) > 0)
- strlcpy(arcs_cmdline, cmd, sizeof(arcs_cmdline));
-
-}
-#else
-static inline void prom_init_cmdline(void) {}
-#endif /* CONFIG_IMAGE_CMDLINE_HACK */
-
-void __init prom_init(void)
-{
- prom_detect_machtype();
- prom_init_cmdline();
-}
-
-void __init prom_free_prom_memory(void)
-{
- /* We do not have to prom memory to free */
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/setup.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/setup.c
deleted file mode 100644
index c0410afdf2..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/setup.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * ADM5120 specific setup
- *
- * Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- * done by Jeroen Vreeken
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- * Jeroen's code was based on the Linux 2.4.xx source codes found in various
- * tarballs released by Edimax for it's ADM5120 based devices
- * Copyright (C) ADMtek Incorporated
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/mips_machine.h>
-#include <asm/idle.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#define ADM5120_SYS_TYPE_LEN 64
-
-unsigned char adm5120_sys_type[ADM5120_SYS_TYPE_LEN];
-void (*adm5120_board_reset)(void);
-
-static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
- [ADM5120_PROM_GENERIC] = "Generic",
- [ADM5120_PROM_CFE] = "CFE",
- [ADM5120_PROM_UBOOT] = "U-Boot",
- [ADM5120_PROM_MYLOADER] = "MyLoader",
- [ADM5120_PROM_ROUTERBOOT] = "RouterBOOT",
- [ADM5120_PROM_BOOTBASE] = "Bootbase"
-};
-
-static void __init adm5120_report(void)
-{
- printk(KERN_INFO "SoC : %s\n", adm5120_sys_type);
- printk(KERN_INFO "Bootdev : %s flash\n",
- adm5120_nand_boot ? "NAND" : "NOR");
- printk(KERN_INFO "Prom : %s\n", prom_names[adm5120_prom_type]);
-}
-
-const char *get_system_type(void)
-{
- return adm5120_sys_type;
-}
-
-static void adm5120_restart(char *command)
-{
- /* TODO: stop switch before reset */
-
- if (adm5120_board_reset)
- adm5120_board_reset();
-
- SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1);
-}
-
-static void adm5120_halt(void)
-{
- local_irq_disable();
-
- while (1) {
- if (cpu_wait)
- cpu_wait();
- }
-}
-
-void __init plat_time_init(void)
-{
- mips_hpt_frequency = adm5120_speed / 2;
-}
-
-void __init plat_mem_setup(void)
-{
- adm5120_soc_init();
- adm5120_mem_init();
-
- sprintf(adm5120_sys_type, "ADM%04X%s rev %u, running at %lu.%03lu MHz",
- adm5120_product_code,
- adm5120_package_bga() ? "" : "P",
- adm5120_revision,
- (adm5120_speed / 1000000), (adm5120_speed / 1000) % 1000);
-
- adm5120_report();
-
- _machine_restart = adm5120_restart;
- _machine_halt = adm5120_halt;
- pm_power_off = adm5120_halt;
-
- set_io_port_base(KSEG1);
-}
-
-static int __init adm5120_board_setup(void)
-{
- adm5120_gpio_init();
-
- mips_machine_setup();
-
- return 0;
-}
-arch_initcall(adm5120_board_setup);
-
-static void __init adm5120_generic_board_setup(void)
-{
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
-
- adm5120_add_device_flash(0);
- adm5120_add_device_switch(6, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_GENERIC, "Generic", "Generic ADM5120 board",
- adm5120_generic_board_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/Makefile
deleted file mode 100644
index 8c66c171e7..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y += compex.o
-
-obj-$(CONFIG_ADM5120_MACH_NP27G) += np27g.o
-obj-$(CONFIG_ADM5120_MACH_NP28G) += np28g.o
-obj-$(CONFIG_ADM5120_MACH_WP54) += wp54.o
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.c
deleted file mode 100644
index 814acfb0cf..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Compex boards
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-#include <asm/mach-adm5120/prom/myloader.h>
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN5, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN5, 1);
- break;
- }
-}
-
-void __init compex_mac_setup(void)
-{
- if (myloader_present()) {
- int i;
-
- for (i = 0; i < 6; i++) {
- if (is_valid_ether_addr(myloader_info.macs[i]))
- memcpy(adm5120_eth_macs[i],
- myloader_info.macs[i], ETH_ALEN);
- else
- random_ether_addr(adm5120_eth_macs[i]);
- }
- } else {
- u8 mac[ETH_ALEN];
-
- random_ether_addr(mac);
- adm5120_setup_eth_macs(mac);
- }
-}
-
-void __init compex_generic_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_add_device_flash(0);
-
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
-
- compex_mac_setup();
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.h
deleted file mode 100644
index 124e676971..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Compex boards
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void compex_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np27g.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np27g.c
deleted file mode 100644
index 82da46d1c7..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np27g.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Compex NP27G board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-static u8 np27g_vlans[6] __initdata = {
- /* FIXME: untested */
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init np27g_setup(void)
-{
- compex_generic_setup();
- adm5120_add_device_switch(5, np27g_vlans);
- adm5120_add_device_usb();
-
- /* TODO: add PCI IRQ map */
-}
-
-MIPS_MACHINE(MACH_ADM5120_NP27G, "NP27G", "Compex NetPassage 27G", np27g_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np28g.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np28g.c
deleted file mode 100644
index a541439998..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np28g.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Compex NP28G board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1),
- PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct gpio_led np28g_gpio_leds[] __initdata = {
- GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
- GPIO_LED_INV(ADM5120_GPIO_PIN3, "power", NULL),
- GPIO_LED_INV(ADM5120_GPIO_PIN6, "wan_cond", NULL),
- GPIO_LED_INV(ADM5120_GPIO_PIN7, "wifi", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L2, "usb1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L2, "usb2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L2, "usb3", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L2, "usb4", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
-};
-
-static u8 np28g_vlans[6] __initdata = {
- 0x50, 0x42, 0x44, 0x48, 0x00, 0x00
-};
-
-static void np28g_reset(void)
-{
- gpio_set_value(ADM5120_GPIO_PIN4, 0);
-}
-
-static void __init np28g_setup(void)
-{
- compex_generic_setup();
-
- /* setup reset line */
- gpio_request(ADM5120_GPIO_PIN4, NULL);
- gpio_direction_output(ADM5120_GPIO_PIN4, 1);
- adm5120_board_reset = np28g_reset;
-
- adm5120_add_device_switch(4, np28g_vlans);
- adm5120_add_device_usb();
-
- adm5120_add_device_gpio_leds(ARRAY_SIZE(np28g_gpio_leds),
- np28g_gpio_leds);
-
- adm5120_pci_set_irq_map(ARRAY_SIZE(np28g_pci_irqs), np28g_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_NP28G, "NP28G", "Compex NetPassage 28G", np28g_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/wp54.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/wp54.c
deleted file mode 100644
index 8aa35c555a..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/wp54.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Compex WP54 board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "compex.h"
-
-#define WP54_KEYS_POLL_INTERVAL 20
-#define WP54_KEYS_DEBOUNCE_INTERVAL (3 * WP54_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wp54g_wrt_partitions[] = {
- {
- .name = "cfe",
- .offset = 0,
- .size = 0x050000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "trx",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x3A0000,
- } , {
- .name = "nvram",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x010000,
- }
-};
-
-static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct gpio_keys_button wp54_gpio_buttons[] __initdata = {
- {
- .desc = "reset_button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WP54_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ADM5120_GPIO_PIN4,
- }
-};
-
-static struct gpio_led wp54_gpio_leds[] __initdata = {
- GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
- GPIO_LED_INV(ADM5120_GPIO_PIN6, "wlan", NULL),
- GPIO_LED_INV(ADM5120_GPIO_PIN7, "wan", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2", NULL),
-};
-
-static u8 wp54_vlans[6] __initdata = {
- 0x41, 0x42, 0x00, 0x00, 0x00, 0x00
-};
-
-static void wp54_reset(void)
-{
- gpio_set_value(ADM5120_GPIO_PIN3, 0);
-}
-
-static void __init wp54_setup(void)
-{
- compex_generic_setup();
-
- /* setup reset line */
- gpio_request(ADM5120_GPIO_PIN3, NULL);
- gpio_direction_output(ADM5120_GPIO_PIN3, 1);
- adm5120_board_reset = wp54_reset;
-
- adm5120_add_device_switch(2, wp54_vlans);
- adm5120_register_gpio_buttons(-1, WP54_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wp54_gpio_buttons),
- wp54_gpio_buttons);
- adm5120_add_device_gpio_leds(ARRAY_SIZE(wp54_gpio_leds),
- wp54_gpio_leds);
-
- adm5120_pci_set_irq_map(ARRAY_SIZE(wp54_pci_irqs), wp54_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_WP54, "WP54", "Compex WP54 family", wp54_setup);
-
-static void __init wp54_wrt_setup(void)
-{
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
- adm5120_flash0_data.parts = wp54g_wrt_partitions;
-
- wp54_setup();
-}
-
-MIPS_MACHINE(MACH_ADM5120_WP54G_WRT, "WP54G-WRT", "Compex WP54G-WRT",
- wp54_wrt_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/Makefile
deleted file mode 100644
index 1286ed4c1e..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y := br-61xx.o
-
-obj-$(CONFIG_ADM5120_MACH_BR_6104K) += br-6104k.o
-obj-$(CONFIG_ADM5120_MACH_BR_6104KP) += br-6104kp.o
-obj-$(CONFIG_ADM5120_MACH_BR_61X4WG) += br-61x4wg.o
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104k.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104k.c
deleted file mode 100644
index 8b2b445506..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104k.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Edimax BR-6104K board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-static struct gpio_led br6104k_gpio_leds[] __initdata = {
- GPIO_LED_STD(ADM5120_GPIO_PIN0, "power", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL),
-};
-
-static void __init br6104k_setup(void)
-{
- br61xx_generic_setup();
- adm5120_add_device_gpio_leds(ARRAY_SIZE(br6104k_gpio_leds),
- br6104k_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_BR6104K, "BR-6104K", "Edimax BR-6104K",
- br6104k_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104kp.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104kp.c
deleted file mode 100644
index 034575d6b2..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104kp.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Edimax BR-6104KP board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-static struct gpio_led br6104kp_gpio_leds[] __initdata = {
- GPIO_LED_STD(ADM5120_GPIO_PIN0, "power", NULL),
- GPIO_LED_INV(ADM5120_GPIO_PIN3, "usb1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_PIN1, "usb2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL),
-};
-
-static void __init br6104kp_setup(void)
-{
- br61xx_generic_setup();
- adm5120_add_device_gpio_leds(ARRAY_SIZE(br6104kp_gpio_leds),
- br6104kp_gpio_leds);
- adm5120_add_device_usb();
-}
-
-MIPS_MACHINE(MACH_ADM5120_BR6104KP, "BR-6104KP", "Edimax BR-6104KP",
- br6104kp_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61x4wg.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61x4wg.c
deleted file mode 100644
index 5d57507101..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61x4wg.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Edimax BR-6104Wg/6114WG board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-static struct adm5120_pci_irq br61x4wg_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct gpio_led br61x4wg_gpio_leds[] __initdata = {
- GPIO_LED_STD(ADM5120_GPIO_PIN0, "power", NULL),
- GPIO_LED_STD(ADM5120_GPIO_PIN5, "wlan", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL),
-};
-
-static void __init br61x4wg_setup(void)
-{
- br61xx_generic_setup();
- adm5120_add_device_gpio_leds(ARRAY_SIZE(br61x4wg_gpio_leds),
- br61x4wg_gpio_leds);
- adm5120_pci_set_irq_map(ARRAY_SIZE(br61x4wg_pci_irqs),
- br61x4wg_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_BR61X4WG, "BR-6104WG", "Edimax BR-6104WG/6114WG",
- br61x4wg_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.c
deleted file mode 100644
index 62a1cee384..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Edimax BR-61xx support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "br-61xx.h"
-
-#include <prom/admboot.h>
-
-#define BR61XX_CONFIG_OFFSET 0x8000
-#define BR61XX_CONFIG_SIZE 0x1000
-
-#define BR61XX_KEYS_POLL_INTERVAL 20
-#define BR61XX_KEYS_DEBOUNCE_INTERVAL (3 * BR61XX_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition br61xx_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 32*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = 32*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct gpio_keys_button br61xx_gpio_buttons[] __initdata = {
- {
- .desc = "reset_button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = BR61XX_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ADM5120_GPIO_PIN2,
- }
-};
-
-static u8 br61xx_vlans[6] __initdata = {
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init br61xx_mac_setup(void)
-{
- u8 mac_base[6];
- int err;
-
- err = admboot_get_mac_base(BR61XX_CONFIG_OFFSET,
- BR61XX_CONFIG_SIZE, mac_base);
-
- if ((err) || !is_valid_ether_addr(mac_base))
- random_ether_addr(mac_base);
-
- adm5120_setup_eth_macs(mac_base);
-}
-
-void __init br61xx_generic_setup(void)
-{
-
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
- adm5120_flash0_data.parts = br61xx_partitions;
- adm5120_add_device_flash(0);
-
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
-
- adm5120_add_device_switch(5, br61xx_vlans);
-
- adm5120_register_gpio_buttons(-1, BR61XX_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(br61xx_gpio_buttons),
- br61xx_gpio_buttons);
-
- br61xx_mac_setup();
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.h
deleted file mode 100644
index c4a9eced56..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Edimax BR-61xx board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void __init br61xx_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/Makefile
deleted file mode 100644
index 0c032e3a52..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ADM5120_MACH_EB_214A) += eb-214a.o
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/eb-214a.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/eb-214a.c
deleted file mode 100644
index cf491a1efc..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/eb-214a.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * EB-214A board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2010 Cezary Jackiewicz <cezary@eko.one.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-
-
-#define EB214A_CONFIG_OFFSET 0x4000
-
-#define EB214A_KEYS_POLL_INTERVAL 20
-#define EB214A_KEYS_DEBOUNCE_INTERVAL (3 * EB214A_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition eb214a_partitions[] = {
- {
- .name = "bootloader",
- .offset = 0,
- .size = 32*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = 32*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct adm5120_pci_irq eb214a_pci_irqs[] __initdata = {
- PCIIRQ(4, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(4, 1, 2, ADM5120_IRQ_PCI0),
- PCIIRQ(4, 2, 3, ADM5120_IRQ_PCI0),
-};
-
-static struct gpio_led eb214a_gpio_leds[] __initdata = {
- GPIO_LED_INV(ADM5120_GPIO_PIN7, "power", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L0, "usb1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L1, "usb2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L2, "usb3", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L0, "usb4", NULL),
-};
-
-static struct gpio_keys_button eb214a_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = EB214A_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ADM5120_GPIO_PIN1,
- }
-};
-
-static u8 eb214a_vlans[6] __initdata = {
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init eb214a_mac_setup(void)
-{
- u8 mac_base[6];
- u8 *cfg;
- int i;
-
- cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + EB214A_CONFIG_OFFSET);
- for (i = 0; i < 6; i++)
- mac_base[i] = cfg[i];
-
- if (!is_valid_ether_addr(mac_base))
- random_ether_addr(mac_base);
-
- adm5120_setup_eth_macs(mac_base);
-}
-
-static void __init eb214a_setup(void)
-{
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(eb214a_partitions);
- adm5120_flash0_data.parts = eb214a_partitions;
- adm5120_add_device_flash(0);
-
- adm5120_add_device_uart(0);
- /* adm5120_add_device_uart(1); */
-
- adm5120_add_device_switch(5, eb214a_vlans);
-
- eb214a_mac_setup();
-
- adm5120_register_gpio_buttons(-1, EB214A_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(eb214a_gpio_buttons),
- eb214a_gpio_buttons);
-
- adm5120_add_device_gpio_leds(ARRAY_SIZE(eb214a_gpio_leds),
- eb214a_gpio_leds);
-
- adm5120_pci_set_irq_map(ARRAY_SIZE(eb214a_pci_irqs),
- eb214a_pci_irqs);
- /* adm5120_add_device_usb(); */
-}
-
-MIPS_MACHINE(MACH_ADM5120_EB_214A, "EB-214A", "Generic EB-214A", eb214a_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/Makefile
deleted file mode 100644
index 49453cba9a..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-obj-y += infineon.o
-
-obj-$(CONFIG_ADM5120_MACH_EASY5120_RT) += easy5120-rt.o
-obj-$(CONFIG_ADM5120_MACH_EASY5120_WVOIP) += easy5120-wvoip.o
-obj-$(CONFIG_ADM5120_MACH_EASY5120P_ATA) += easy5120p-ata.o
-obj-$(CONFIG_ADM5120_MACH_EASY83000) += easy83000.o
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-rt.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-rt.c
deleted file mode 100644
index 31eaee7721..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-rt.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Infineon EASY 5120-RT Reference Board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static struct gpio_led easy5120_rt_gpio_leds[] __initdata = {
- GPIO_LED_INV(ADM5120_GPIO_PIN6, "user", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan0_led1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan0_led2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_led1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_led2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_led1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_led2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_led1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_led2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
-};
-
-static struct adm5120_pci_irq easy5120_rt_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static u8 easy5120_rt_vlans[6] __initdata = {
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static void __init easy5120_rt_setup(void)
-{
- easy_setup_bga();
-
- adm5120_add_device_switch(5, easy5120_rt_vlans);
- adm5120_add_device_usb();
- adm5120_add_device_gpio_leds(ARRAY_SIZE(easy5120_rt_gpio_leds),
- easy5120_rt_gpio_leds);
- adm5120_pci_set_irq_map(ARRAY_SIZE(easy5120_rt_pci_irqs),
- easy5120_rt_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY5120RT, "EASY5120-RT",
- "Infineon EASY 5120-RT Reference Board", easy5120_rt_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-wvoip.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-wvoip.c
deleted file mode 100644
index 0bf404cc26..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-wvoip.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Infineon EASY 5120-WVoIP Reference Board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static void __init easy5120wvoip_setup(void)
-{
- easy_setup_bga();
- adm5120_add_device_switch(6, NULL);
-
- /* TODO: add VINETIC2 device */
- /* TODO: setup PCI IRQ map */
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY5120WVOIP, "EASY5120WVoIP",
- "Infineon EASY 5120-WVoIP Reference Board", easy5120wvoip_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120p-ata.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120p-ata.c
deleted file mode 100644
index fafe0238bd..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120p-ata.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Infineon EASY 5120P-ATA Reference Board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static void __init easy5120pata_setup(void)
-{
- easy_setup_pqfp();
-
- adm5120_add_device_switch(6, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY5120PATA, "EASY5120P-ATA",
- "Infineon EASY 5120P-ATA Reference Board", easy5120pata_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy83000.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy83000.c
deleted file mode 100644
index 051b852749..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy83000.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Infineon EASY 83000 Reference Board support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-static void __init easy83000_setup(void)
-{
- easy_setup_pqfp();
- adm5120_add_device_switch(6, NULL);
-
- /* TODO: add VINAX device */
-}
-
-MIPS_MACHINE(MACH_ADM5120_EASY83000, "EASY8300",
- "Infineon EASY 83000 Reference Board", easy83000_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.c
deleted file mode 100644
index 5c441da90e..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Infineon Reference Boards
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-#include <prom/admboot.h>
-
-#define EASY_CONFIG_OFFSET 0x10000
-#define EASY_CONFIG_SIZE 0x1000
-
-static struct mtd_partition easy_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 64*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "boardcfg",
- .offset = MTDPART_OFS_APPEND,
- .size = 64*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static __init void easy_setup_mac(void)
-{
- u8 mac_base[6];
- int err;
-
- err = admboot_get_mac_base(EASY_CONFIG_OFFSET,
- EASY_CONFIG_SIZE, mac_base);
-
- if ((err) || !is_valid_ether_addr(mac_base))
- random_ether_addr(mac_base);
-
- adm5120_setup_eth_macs(mac_base);
-}
-
-static void switch_bank_gpio3(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN3, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN3, 1);
- break;
- }
-}
-
-void __init easy_setup_pqfp(void)
-{
- /* setup flash A20 line */
- gpio_request(ADM5120_GPIO_PIN3, NULL);
- gpio_direction_output(ADM5120_GPIO_PIN3, 0);
- adm5120_flash0_data.switch_bank = switch_bank_gpio3;
-
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
- adm5120_flash0_data.parts = easy_partitions;
-
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
-
- adm5120_add_device_flash(0);
-
- easy_setup_mac();
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN5, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN5, 1);
- break;
- }
-}
-
-void __init easy_setup_bga(void)
-{
- /* setup flash A20 line */
- gpio_request(ADM5120_GPIO_PIN5, NULL);
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
- adm5120_flash0_data.parts = easy_partitions;
-
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
-
- adm5120_add_device_flash(0);
-
- easy_setup_mac();
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.h
deleted file mode 100644
index a5f28b4fec..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Infineon Reference Boards
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-extern void easy_setup_pqfp(void) __init;
-extern void easy_setup_bga(void) __init;
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/Makefile
deleted file mode 100644
index 34ea0a3d88..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-obj-y += rb-1xx.o
-
-obj-${CONFIG_ADM5120_MACH_RB_11X} += rb-11x.o
-obj-${CONFIG_ADM5120_MACH_RB_133} += rb-133.o
-obj-${CONFIG_ADM5120_MACH_RB_133C} += rb-133c.o
-obj-${CONFIG_ADM5120_MACH_RB_150} += rb-150.o
-obj-${CONFIG_ADM5120_MACH_RB_153} += rb-153.o
-obj-${CONFIG_ADM5120_MACH_RB_192} += rb-192.o
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-11x.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-11x.c
deleted file mode 100644
index fd768d8ef0..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-11x.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Mikrotik RouterBOARD 111/112 support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct gpio_led rb11x_gpio_leds[] __initdata = {
- GPIO_LED_STD(ADM5120_GPIO_PIN3, "user", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan_lnkact", NULL),
-};
-
-static u8 rb11x_vlans[6] __initdata = {
- 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb11x_setup(void)
-{
- rb1xx_generic_setup();
- rb1xx_add_device_nand();
-
- adm5120_add_device_switch(1, rb11x_vlans);
- adm5120_add_device_gpio_leds(ARRAY_SIZE(rb11x_gpio_leds),
- rb11x_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_11X, "11x", "Mikrotik RouterBOARD 111/112",
- rb11x_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133.c
deleted file mode 100644
index 23c57820c3..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Mikrotik RouterBOARD 133 support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct gpio_led rb133_gpio_leds[] __initdata = {
- GPIO_LED_STD(ADM5120_GPIO_PIN6, "power", NULL),
- GPIO_LED_STD(ADM5120_GPIO_PIN5, "user", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan2_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan3_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan3_lnkact", NULL),
-};
-
-static u8 rb133_vlans[6] __initdata = {
- 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb133_setup(void)
-{
- rb1xx_generic_setup();
- rb1xx_add_device_nand();
-
- adm5120_add_device_switch(3, rb133_vlans);
- adm5120_add_device_gpio_leds(ARRAY_SIZE(rb133_gpio_leds),
- rb133_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_133, "133", "Mikrotik RouterBOARD 133",
- rb133_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133c.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133c.c
deleted file mode 100644
index 25bab70c00..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133c.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Mikrotik RouterBOARD 133C support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct gpio_led rb133c_gpio_leds[] __initdata = {
- GPIO_LED_STD(ADM5120_GPIO_PIN6, "power", NULL),
- GPIO_LED_STD(ADM5120_GPIO_PIN5, "user", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact", NULL),
-};
-
-static u8 rb133c_vlans[6] __initdata = {
- 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb133c_setup(void)
-{
- rb1xx_generic_setup();
- rb1xx_add_device_nand();
-
- adm5120_add_device_switch(1, rb133c_vlans);
- adm5120_add_device_gpio_leds(ARRAY_SIZE(rb133c_gpio_leds),
- rb133c_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_133C, "133C", "Mikrotik RouterBOARD 133C",
- rb133c_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-150.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-150.c
deleted file mode 100644
index 96a8c1b87b..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-150.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Mikrotik RouterBOARD 150 support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-#define RB150_NAND_BASE 0x1FC80000
-#define RB150_NAND_SIZE 1
-
-#define RB150_GPIO_NAND_READY ADM5120_GPIO_PIN0
-#define RB150_GPIO_NAND_NCE ADM5120_GPIO_PIN1
-#define RB150_GPIO_NAND_CLE ADM5120_GPIO_P2L2
-#define RB150_GPIO_NAND_ALE ADM5120_GPIO_P3L2
-#define RB150_GPIO_RESET_BUTTON ADM5120_GPIO_PIN1 /* FIXME */
-
-#define RB150_NAND_DELAY 100
-
-#define RB150_NAND_WRITE(v) \
- writeb((v), (void __iomem *)KSEG1ADDR(RB150_NAND_BASE))
-
-static struct resource rb150_nand_resources[] __initdata = {
- [0] = {
- .start = RB150_NAND_BASE,
- .end = RB150_NAND_BASE + RB150_NAND_SIZE-1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct gpio_led rb150_gpio_leds[] __initdata = {
- GPIO_LED_STD(ADM5120_GPIO_P0L2, "user", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan1_led1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1_led2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan5_led1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan5_led2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan4_led1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan4_led2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_led1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_led2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan2_led1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan2_led2", NULL),
-};
-
-static u8 rb150_vlans[6] __initdata = {
- 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static int rb150_nand_dev_ready(struct mtd_info *mtd)
-{
- return gpio_get_value(RB150_GPIO_NAND_READY);
-}
-
-static void rb150_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- if (ctrl & NAND_CTRL_CHANGE) {
- gpio_set_value(RB150_GPIO_NAND_CLE, (ctrl & NAND_CLE) ? 1 : 0);
- gpio_set_value(RB150_GPIO_NAND_ALE, (ctrl & NAND_ALE) ? 1 : 0);
- gpio_set_value(RB150_GPIO_NAND_NCE, (ctrl & NAND_NCE) ? 0 : 1);
- }
-
- udelay(RB150_NAND_DELAY);
-
- if (cmd != NAND_CMD_NONE)
- RB150_NAND_WRITE(cmd);
-}
-
-static void __init rb150_add_device_nand(void)
-{
- struct platform_device *pdev;
- int err;
-
- /* setup GPIO pins for NAND flash chip */
- gpio_request(RB150_GPIO_NAND_READY, "nand-ready");
- gpio_direction_input(RB150_GPIO_NAND_READY);
- gpio_request(RB150_GPIO_NAND_NCE, "nand-nce");
- gpio_direction_output(RB150_GPIO_NAND_NCE, 1);
- gpio_request(RB150_GPIO_NAND_CLE, "nand-cle");
- gpio_direction_output(RB150_GPIO_NAND_CLE, 0);
- gpio_request(RB150_GPIO_NAND_ALE, "nand-ale");
- gpio_direction_output(RB150_GPIO_NAND_ALE, 0);
-
- pdev = platform_device_alloc("gen_nand", -1);
- if (!pdev)
- goto err_out;
-
- err = platform_device_add_resources(pdev, rb150_nand_resources,
- ARRAY_SIZE(rb150_nand_resources));
- if (err)
- goto err_put;
-
-
- rb1xx_nand_data.ctrl.cmd_ctrl = rb150_nand_cmd_ctrl;
- rb1xx_nand_data.ctrl.dev_ready = rb150_nand_dev_ready;
-
- err = platform_device_add_data(pdev, &rb1xx_nand_data,
- sizeof(rb1xx_nand_data));
- if (err)
- goto err_put;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put;
-
- return;
-
-err_put:
- platform_device_put(pdev);
-err_out:
- return;
-}
-
-static void __init rb150_setup(void)
-{
- rb1xx_gpio_buttons[0].gpio = RB150_GPIO_RESET_BUTTON;
- rb1xx_generic_setup();
- rb150_add_device_nand();
-
- adm5120_add_device_gpio_leds(ARRAY_SIZE(rb150_gpio_leds),
- rb150_gpio_leds);
- adm5120_add_device_switch(5, rb150_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_150, "miniROUTER", "Mikrotik RouterBOARD 150",
- rb150_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-153.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-153.c
deleted file mode 100644
index 8456684951..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-153.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Mikrotik RouterBOARD 153 support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static struct resource rb153_cf_resources[] __initdata = {
- {
- .name = "cf_membase",
- .start = ADM5120_EXTIO1_BASE,
- .end = ADM5120_EXTIO1_BASE + ADM5120_EXTIO1_SIZE-1 ,
- .flags = IORESOURCE_MEM
- }, {
- .name = "cf_irq",
- .start = ADM5120_IRQ_GPIO4,
- .end = ADM5120_IRQ_GPIO4,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct gpio_led rb153_gpio_leds[] __initdata = {
- GPIO_LED_STD(ADM5120_GPIO_PIN5, "user", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan1_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan5_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan5_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan4_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan4_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan2_speed", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan2_lnkact", NULL),
-};
-
-static u8 rb153_vlans[6] __initdata = {
- 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb153_add_device_cf(void)
-{
- /* enable CSX1:INTX1 on GPIO[3:4] for the CF slot */
- adm5120_gpio_csx1_enable();
-
- /* enable the wait state pin GPIO[0] for external I/O control */
- adm5120_gpio_ew_enable();
-
- platform_device_register_simple("pata-rb153-cf", -1,
- rb153_cf_resources, ARRAY_SIZE(rb153_cf_resources));
-}
-
-static void __init rb153_setup(void)
-{
- rb1xx_generic_setup();
- rb1xx_add_device_nand();
- rb153_add_device_cf();
-
- adm5120_add_device_gpio_leds(ARRAY_SIZE(rb153_gpio_leds),
- rb153_gpio_leds);
- adm5120_add_device_switch(5, rb153_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_153, "150", "Mikrotik RouterBOARD 153",
- rb153_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-192.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-192.c
deleted file mode 100644
index 9049421397..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-192.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Mikrotik RouterBOARD 192 support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-static u8 rb192_vlans[6] __initdata = {
- 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init rb192_setup(void)
-{
- rb1xx_generic_setup();
- rb1xx_add_device_nand();
-
- adm5120_add_device_switch(6, rb192_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_RB_192, "192", "Mikrotik RouterBOARD 192",
- rb192_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.c
deleted file mode 100644
index 8961115c7e..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Mikrotik RouterBOARD 1xx series support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * NAND initialization code was based on a driver for Linux 2.6.19+ which
- * was derived from the driver for Linux 2.4.xx published by Mikrotik for
- * their RouterBoard 1xx and 5xx series boards.
- * Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-#define RB1XX_NAND_CHIP_DELAY 25
-
-#define RB1XX_KEYS_POLL_INTERVAL 20
-#define RB1XX_KEYS_DEBOUNCE_INTERVAL (3 * RB1XX_KEYS_POLL_INTERVAL)
-
-static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
- PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1),
- PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition rb1xx_nor_parts[] = {
- {
- .name = "booter",
- .offset = 0,
- .size = 64*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition rb1xx_nand_parts[] = {
- {
- .name = "kernel",
- .offset = 0,
- .size = 4 * 1024 * 1024,
- } , {
- .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- }
-};
-
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load. So set the oobinfo
- * when creating the partitions
- */
-static struct nand_ecclayout rb1xx_nand_ecclayout = {
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-/*--------------------------------------------------------------------------*/
-
-static int rb1xx_nand_fixup(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (mtd->writesize == 512)
- chip->ecc.layout = &rb1xx_nand_ecclayout;
-
- return 0;
-}
-
-struct platform_nand_data rb1xx_nand_data __initdata = {
- .chip = {
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(rb1xx_nand_parts),
- .partitions = rb1xx_nand_parts,
- .chip_delay = RB1XX_NAND_CHIP_DELAY,
- .chip_fixup = rb1xx_nand_fixup,
- },
-};
-
-struct gpio_keys_button rb1xx_gpio_buttons[] __initdata = {
- {
- .desc = "reset_button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RB1XX_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ADM5120_GPIO_PIN7,
- }
-};
-
-static void __init rb1xx_mac_setup(void)
-{
- if (rb_hs.mac_base != NULL && is_valid_ether_addr(rb_hs.mac_base)) {
- adm5120_setup_eth_macs(rb_hs.mac_base);
- } else {
- u8 mac[ETH_ALEN];
-
- random_ether_addr(mac);
- adm5120_setup_eth_macs(mac);
- }
-}
-
-void __init rb1xx_add_device_flash(void)
-{
- /* setup data for flash0 device */
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts);
- adm5120_flash0_data.parts = rb1xx_nor_parts;
- adm5120_flash0_data.window_size = 128*1024;
-
- adm5120_add_device_flash(0);
-}
-
-void __init rb1xx_add_device_nand(void)
-{
- /* enable NAND flash interface */
- adm5120_nand_enable();
-
- /* initialize NAND chip */
- adm5120_nand_set_spn(1);
- adm5120_nand_set_wpn(0);
-
- adm5120_add_device_nand(&rb1xx_nand_data);
-}
-
-void __init rb1xx_generic_setup(void)
-{
- if (adm5120_package_bga())
- adm5120_pci_set_irq_map(ARRAY_SIZE(rb1xx_pci_irqs),
- rb1xx_pci_irqs);
-
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
-
- adm5120_register_gpio_buttons(-1, RB1XX_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rb1xx_gpio_buttons),
- rb1xx_gpio_buttons);
-
- rb1xx_add_device_flash();
- rb1xx_mac_setup();
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.h
deleted file mode 100644
index 05e68bd0a8..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Mikrotik RouterBOARD 1xx series support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_nand.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-#include <prom/routerboot.h>
-
-extern struct platform_nand_data rb1xx_nand_data __initdata;
-extern struct gpio_keys_button rb1xx_gpio_buttons[] __initdata;
-
-extern void rb1xx_add_device_flash(void) __init;
-extern void rb1xx_add_device_nand(void) __init;
-extern void rb1xx_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/Makefile
deleted file mode 100644
index 239d5a0880..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ADM5120_MACH_PMUGW) += pmugw.o
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/pmugw.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/pmugw.c
deleted file mode 100644
index 369892fd13..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/pmugw.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Motorola Powerline MU Gateway board
- *
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-#include <prom/admboot.h>
-
-#define PMUGW_CONFIG_OFFSET 0x10000
-#define PMUGW_CONFIG_SIZE 0x1000
-
-static struct mtd_partition pmugw_partitions[] = {
- {
- .name = "admboot",
- .offset = 0,
- .size = 64*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "boardcfg",
- .offset = MTDPART_OFS_APPEND,
- .size = 64*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static u8 pmugw_vlans[6] __initdata = {
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static __init void pmugw_setup_mac(void)
-{
- u8 mac_base[6];
- int err;
-
- err = admboot_get_mac_base(PMUGW_CONFIG_OFFSET,
- PMUGW_CONFIG_SIZE, mac_base);
-
- if ((err) || !is_valid_ether_addr(mac_base))
- random_ether_addr(mac_base);
-
- adm5120_setup_eth_macs(mac_base);
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN5, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN5, 1);
- break;
- }
-}
-
-void __init pmugw_setup(void)
-{
- /* setup flash A20 line */
- gpio_request(ADM5120_GPIO_PIN5, NULL);
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions);
- adm5120_flash0_data.parts = pmugw_partitions;
-
- adm5120_add_device_uart(1); /* ttyAM0 */
- adm5120_add_device_uart(0); /* ttyAM1 */
-
- adm5120_add_device_flash(0);
-
- pmugw_setup_mac();
- adm5120_add_device_switch(5, pmugw_vlans);
-}
-
-MIPS_MACHINE(MACH_ADM5120_PMUGW, "PMUGW", "Motorola Powerline MU Gateway",
- pmugw_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/5gxi.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/5gxi.c
deleted file mode 100644
index a5c2c3653e..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/5gxi.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * OSBRiDGE 5GXi/5XLi board support
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-
-static struct mtd_partition osbridge_5gxi_partitions[] = {
- {
- .name = "bootloader",
- .offset = 0,
- .size = 64*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "boardcfg",
- .offset = 64*1024,
- .size = 64*1024,
- } , {
- .name = "firmware",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct gpio_led osbridge_5gxi_gpio_leds[] __initdata = {
- GPIO_LED_INV(ADM5120_GPIO_PIN6, "5gxi:green:user", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "5gxi:yellow:lan", NULL),
-};
-
-static struct adm5120_pci_irq osbridge_5gxi_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static u8 osbridge_5gxi_vlans[6] __initdata = {
- 0x41, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static void __init osbridge_5gxi_setup(void)
-{
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(osbridge_5gxi_partitions);
- adm5120_flash0_data.parts = osbridge_5gxi_partitions;
-
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
-
- adm5120_add_device_flash(0);
-
- adm5120_add_device_switch(1, osbridge_5gxi_vlans);
- adm5120_add_device_gpio_leds(ARRAY_SIZE(osbridge_5gxi_gpio_leds),
- osbridge_5gxi_gpio_leds);
- adm5120_pci_set_irq_map(ARRAY_SIZE(osbridge_5gxi_pci_irqs),
- osbridge_5gxi_pci_irqs);
-}
-
-MIPS_MACHINE(MACH_ADM5120_5GXI, "5GXi", "OSBRiDGE 5GXi/5XLi board",
- osbridge_5gxi_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/Makefile
deleted file mode 100644
index 34946c5e58..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ADM5120_MACH_5GXI) += 5gxi.o
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/Makefile
deleted file mode 100644
index 650be40779..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-lib-y += admboot.o
-lib-y += bootbase.o
-lib-y += cfe.o
-lib-y += generic.o
-lib-y += myloader.o
-lib-y += routerboot.o
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/admboot.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/admboot.c
deleted file mode 100644
index b655390c16..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/admboot.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * ADMBoot specific prom routines
- *
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/admboot.h>
-#include "prom_read.h"
-
-#define ADMBOOT_MAGIC_MAC_BASE 0x636D676D /* 'mgmc' */
-#define ADMBOOT_MAGIC_MAC_BASE_BR6104XX 0x31305348 /* 'HS01' */
-
-int __init admboot_get_mac_base(u32 offset, u32 len, u8 *mac)
-{
- u8 *cfg;
- int i;
-
- cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + offset);
- for (i = 0; i < len; i += 4) {
- u32 magic;
-
- magic = prom_read_le32(cfg + i);
- if (magic == ADMBOOT_MAGIC_MAC_BASE) {
- int j;
-
- for (j = 0; j < 6; j++)
- mac[j] = cfg[i + 4 + j];
-
- return 0;
- }
- if (magic == ADMBOOT_MAGIC_MAC_BASE_BR6104XX) {
- int j;
-
- for (j = 0; j < 6; j++)
- mac[j] = cfg[i + 7 + j];
-
- return 0;
- }
- }
-
- return -ENXIO;
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/bootbase.c
deleted file mode 100644
index 063281e3f7..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/bootbase.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * ZyXEL's Bootbase specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/zynos.h>
-#include "prom_read.h"
-
-#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
-#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
-#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE)
-#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024))
-
-static int bootbase_found;
-static struct zynos_board_info *board_info;
-
-struct bootbase_info bootbase_info;
-
-static inline int bootbase_dbgarea_present(u8 *data)
-{
- u32 t;
-
- t = prom_read_be32(data+5);
- if (t != ZYNOS_MAGIC_DBGAREA1)
- return 0;
-
- t = prom_read_be32(data+9);
- if (t != ZYNOS_MAGIC_DBGAREA2)
- return 0;
-
- return 1;
-}
-
-static inline u32 bootbase_get_bootext_addr(void)
-{
- return prom_read_be32(&board_info->bootext_addr);
-}
-
-static inline void bootbase_get_mac(u8 *mac)
-{
- int i;
-
- for (i = 0; i < 6; i++)
- mac[i] = board_info->mac[i];
-}
-
-static inline u16 bootbase_get_vendor_id(void)
-{
-#define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0)
- unsigned char vendor[ZYNOS_NAME_LEN];
- int i;
-
- for (i = 0; i < ZYNOS_NAME_LEN; i++)
- vendor[i] = board_info->vendor[i];
-
- if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
- return ZYNOS_VENDOR_ID_ZYXEL;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
- return ZYNOS_VENDOR_ID_DLINK;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
- return ZYNOS_VENDOR_ID_LUCENT;
-
- if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
- return ZYNOS_VENDOR_ID_NETGEAR;
-
- return ZYNOS_VENDOR_ID_OTHER;
-}
-
-static inline u16 bootbase_get_board_id(void)
-{
- return prom_read_be16(&board_info->board_id);
-}
-
-int __init bootbase_present(void)
-{
- u32 t;
-
- if (bootbase_found)
- goto out;
-
- /* check presence of the dbgarea */
- if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
- goto out;
-
- board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
-
- /* check for a valid BootExt address */
- t = bootbase_get_bootext_addr();
- if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
- goto out;
-
- bootbase_info.vendor_id = bootbase_get_vendor_id();
- bootbase_info.board_id = bootbase_get_board_id();
- bootbase_get_mac(bootbase_info.mac);
-
- bootbase_found = 1;
-
-out:
- return bootbase_found;
-}
-
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/cfe.c
deleted file mode 100644
index 5a343cd7e4..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/cfe.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Broadcom's CFE specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <prom/cfe.h>
-#include "prom_read.h"
-
-/*
- * CFE based boards
- */
-#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE
-from other bootloaders */
-
-static int cfe_found;
-
-static u32 cfe_handle;
-static u32 cfe_entry;
-static u32 cfe_seal;
-
-int __init cfe_present(void)
-{
- /*
- * This method only works, when we are booted directly from the CFE.
- */
- u32 a1 = (u32) fw_arg1;
-
- if (cfe_found)
- return 1;
-
- cfe_handle = (u32) fw_arg0;
- cfe_entry = (u32) fw_arg2;
- cfe_seal = (u32) fw_arg3;
-
- /* Check for CFE by finding the CFE magic number */
- if (cfe_seal != CFE_EPTSEAL)
- return 0;
-
- /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
- if (a1 != 0)
- return 0;
-
- /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
- if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0))
- return 0;
-
- cfe_found = 1;
- return 1;
-}
-
-char *cfe_getenv(char *envname)
-{
- if (cfe_found == 0)
- return NULL;
-
- return NULL;
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/generic.c
deleted file mode 100644
index 4d4caa8476..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/generic.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Generic PROM routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom/generic.h>
-
-static int *_prom_argc;
-static char **_prom_argv;
-static char **_prom_envp;
-
-char *generic_prom_getenv(char *envname)
-{
- char **env;
- char *ret;
-
- ret = NULL;
- for (env = _prom_envp; *env != NULL; env++) {
- if (strcmp(envname, *env++) == 0) {
- ret = *env;
- break;
- }
- }
-
- return ret;
-}
-
-int generic_prom_present(void)
-{
- _prom_argc = (int *)fw_arg0;
- _prom_argv = (char **)fw_arg1;
- _prom_envp = (char **)fw_arg2;
-
- return 1;
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/myloader.c
deleted file mode 100644
index 5357db511b..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/myloader.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Compex's MyLoader specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/myloader.h>
-#include "prom_read.h"
-
-#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
-#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
-#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
-
-static int myloader_found;
-
-struct myloader_info myloader_info;
-
-int __init myloader_present(void)
-{
- struct mylo_system_params *sysp;
- struct mylo_board_params *boardp;
- struct mylo_partition_table *parts;
- int i;
-
- if (myloader_found)
- goto out;
-
- sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
- boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
- parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
-
- /* Check for some magic numbers */
- if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
- (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
- (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
- goto out;
-
- myloader_info.vid = le32_to_cpu(sysp->vid);
- myloader_info.did = le32_to_cpu(sysp->did);
- myloader_info.svid = le32_to_cpu(sysp->svid);
- myloader_info.sdid = le32_to_cpu(sysp->sdid);
-
- for (i = 0; i < MYLO_ETHADDR_COUNT; i++) {
- int j;
- for (j = 0; j < 6; j++)
- myloader_info.macs[i][j] = boardp->addr[i].mac[j];
- }
-
- myloader_found = 1;
-
-out:
- return myloader_found;
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/prom_read.h
deleted file mode 100644
index 1a6ea110ce..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/prom_read.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Generic prom definitions
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_PROM_H_
-#define _ADM5120_PROM_H_
-
-/*
- * Helper routines
- */
-static inline u16 prom_read_le16(void *buf)
-{
- u8 *p = buf;
-
- return ((u16)p[0] + ((u16)p[1] << 8));
-}
-
-static inline u32 prom_read_le32(void *buf)
-{
- u8 *p = buf;
-
- return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
- ((u32)p[3] << 24));
-}
-
-static inline u16 prom_read_be16(void *buf)
-{
- u8 *p = buf;
-
- return (((u16)p[0] << 8) + (u16)p[1]);
-}
-
-static inline u32 prom_read_be32(void *buf)
-{
- u8 *p = buf;
-
- return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
- ((u32)p[3]));
-}
-
-#endif /* _ADM5120_PROM_H_ */
-
-
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/routerboot.c
deleted file mode 100644
index d9a06d968e..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/routerboot.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Mikrotik's RouterBOOT specific prom routines
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/routerboot.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <prom/routerboot.h>
-#include "prom_read.h"
-
-struct rb_hard_settings rb_hs;
-static int rb_found;
-
-static int __init routerboot_load_hs(u8 *buf, u16 buflen)
-{
- u16 id, len;
-
- memset(&rb_hs, 0, sizeof(rb_hs));
-
- if (buflen < 4)
- return -1;
-
- if (prom_read_le32(buf) != RB_MAGIC_HARD)
- return -1;
-
- /* skip magic value */
- buf += 4;
- buflen -= 4;
-
- while (buflen > 2) {
- id = prom_read_le16(buf);
- buf += 2;
- buflen -= 2;
- if (id == RB_ID_TERMINATOR || buflen < 2)
- break;
-
- len = prom_read_le16(buf);
- buf += 2;
- buflen -= 2;
-
- if (buflen < len)
- break;
-
- switch (id) {
- case RB_ID_BIOS_VERSION:
- rb_hs.bios_ver = (char *)buf;
- break;
- case RB_ID_BOARD_NAME:
- rb_hs.name = (char *)buf;
- break;
- case RB_ID_MEMORY_SIZE:
- rb_hs.mem_size = prom_read_le32(buf);
- break;
- case RB_ID_MAC_ADDRESS_COUNT:
- rb_hs.mac_count = prom_read_le32(buf);
- break;
- case RB_ID_MAC_ADDRESS_PACK:
- if ((len / RB_MAC_SIZE) > 0)
- rb_hs.mac_base = buf;
- break;
- }
-
- buf += len;
- buflen -= len;
-
- }
-
- return 0;
-}
-
-#define RB_BS_OFFS 0x14
-#define RB_OFFS_MAX (128*1024)
-
-int __init routerboot_present(void)
-{
- struct rb_bios_settings *bs;
- u8 *base;
- u32 off, len;
-
- if (rb_found)
- goto out;
-
- base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
- bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
-
- off = prom_read_le32(&bs->hs_offs);
- len = prom_read_le32(&bs->hs_size);
- if (off > RB_OFFS_MAX)
- goto out;
-
- if (routerboot_load_hs(base+off, len) != 0)
- goto out;
-
- rb_found = 1;
-
-out:
- return rb_found;
-}
-
-char *routerboot_get_boardname(void)
-{
- if (rb_found == 0)
- return NULL;
-
- return rb_hs.name;
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/Makefile
deleted file mode 100644
index e8325a1b1f..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-obj-y += p-33x.o
-
-obj-${CONFIG_ADM5120_MACH_P_334WT} += p-334wt.o
-obj-${CONFIG_ADM5120_MACH_P_335} += p-335.o \ No newline at end of file
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-334wt.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-334wt.c
deleted file mode 100644
index 6cc9aee857..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-334wt.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * ZyXEL Prestige P-334WT support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "p-33x.h"
-
-static struct gpio_led p334wt_gpio_leds[] __initdata = {
- GPIO_LED_INV(ADM5120_GPIO_PIN2, "power", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan1", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan3", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan4", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P4L2, "wlan", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P2L2, "otist", NULL),
- GPIO_LED_INV(ADM5120_GPIO_P1L2, "hidden", NULL),
-};
-
-static void __init p334wt_setup(void)
-{
- p33x_generic_setup();
- adm5120_add_device_gpio_leds(ARRAY_SIZE(p334wt_gpio_leds),
- p334wt_gpio_leds);
-}
-
-MIPS_MACHINE(MACH_ADM5120_P334WT, "P-334WT", "ZyXEL Prestige 334WT",
- p334wt_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-335.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-335.c
deleted file mode 100644
index 6ac2b09158..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-335.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * ZyXEL Prestige P-335/335WT support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "p-33x.h"
-
-static void __init p335_setup(void)
-{
- p33x_generic_setup();
- adm5120_add_device_usb();
-}
-
-MIPS_MACHINE(MACH_ADM5120_P335, "P-335", "ZyXEL Prestige 335/335WT",
- p335_setup);
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.c
deleted file mode 100644
index 2626cf9eec..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * ZyXEL Prestige P-33x boards support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "p-33x.h"
-
-#include <prom/zynos.h>
-
-#define P33X_GPIO_FLASH_A20 ADM5120_GPIO_PIN5
-static struct mtd_partition p33x_partitions[] = {
- {
- .name = "bootbase",
- .offset = 0,
- .size = 16*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "rom",
- .offset = MTDPART_OFS_APPEND,
- .size = 16*1024,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "bootext1",
- .offset = MTDPART_OFS_APPEND,
- .size = 32*1024,
- } , {
- .name = "bootext2",
- .offset = MTDPART_OFS_APPEND,
- .size = 64*1024,
- } , {
- .name = "trx",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- } , {
- .name = "firmware",
- .offset = 32*1024,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static u8 p33x_vlans[6] __initdata = {
- /* FIXME: untested */
- 0x50, 0x48, 0x44, 0x42, 0x41, 0x00
-};
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(P33X_GPIO_FLASH_A20, 0);
- break;
- case 1:
- gpio_set_value(P33X_GPIO_FLASH_A20, 1);
- break;
- }
-}
-
-void __init p33x_generic_setup(void)
-{
- /* setup data for flash0 device */
- gpio_request(P33X_GPIO_FLASH_A20, NULL); /* for flash A20 line */
- gpio_direction_output(P33X_GPIO_FLASH_A20, 0);
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
- adm5120_flash0_data.parts = p33x_partitions;
- adm5120_add_device_flash(0);
-
- adm5120_add_device_uart(0);
- adm5120_add_device_uart(1);
-
- adm5120_setup_eth_macs(bootbase_info.mac);
- adm5120_add_device_switch(6, p33x_vlans);
-
- adm5120_pci_set_irq_map(ARRAY_SIZE(p33x_pci_irqs), p33x_pci_irqs);
-}
diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.h
deleted file mode 100644
index 8a7340cb5e..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * ZyXEL Prestige P-33x boards support
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <asm/mips_machine.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-extern void p33x_generic_setup(void) __init;
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h
deleted file mode 100644
index bf220ff4d6..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * ADM5120 SoC definitions
- *
- * This file defines some constants specific to the ADM5120 SoC
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef _ASM_MIPS_MACH_ADM5120_DEFS_H
-#define _ASM_MIPS_MACH_ADM5120_DEFS_H
-
-#define ADM5120_SDRAM0_BASE 0x00000000
-#define ADM5120_SDRAM1_BASE 0x01000000
-#define ADM5120_SRAM1_BASE 0x10000000
-#define ADM5120_EXTIO0_BASE 0x10C00000
-#define ADM5120_EXTIO0_SIZE 0x00200000
-#define ADM5120_EXTIO1_BASE 0x10E00000
-#define ADM5120_EXTIO1_SIZE 0x00200000
-#define ADM5120_MPMC_BASE 0x11000000
-#define ADM5120_MPMC_SIZE 0x00200000
-#define ADM5120_USBC_BASE 0x11200000
-#define ADM5120_USBC_SIZE 0x00200000
-#define ADM5120_PCIMEM_BASE 0x11400000
-#define ADM5120_PCIMEM_SIZE 0x00100000
-#define ADM5120_PCIIO_BASE 0x11500000
-#define ADM5120_PCIIO_SIZE 0x000FFFF0
-#define ADM5120_PCICFG_ADDR 0x115FFFF0
-#define ADM5120_PCICFG_DATA 0x115FFFF8
-#define ADM5120_PCICFG_SIZE 0x00000010
-#define ADM5120_SWITCH_BASE 0x12000000
-#define ADM5120_SWITCH_SIZE 0x00200000
-#define ADM5120_INTC_BASE 0x12200000
-#define ADM5120_INTC_SIZE 0x00200000
-#define ADM5120_UART0_BASE 0x12600000
-#define ADM5120_UART1_BASE 0x12800000
-#define ADM5120_UART_SIZE 0x00200000
-#define ADM5120_SRAM0_BASE 0x1FC00000
-
-#define ADM5120_NAND_BASE ADM5120_SRAM1_BASE
-#define ADM5120_NAND_SIZE 0xB
-
-#define ADM5120_CLK_175 175000000
-#define ADM5120_CLK_200 200000000
-#define ADM5120_CLK_225 225000000
-#define ADM5120_CLK_250 250000000
-
-#define ADM5120_UART_CLOCK 62500000
-
-#endif /* _ASM_MIPS_MACH_ADM5120_DEFS_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h
deleted file mode 100644
index 1d34d80ee6..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_INFO_H
-#define _MACH_ADM5120_INFO_H
-
-#include <linux/types.h>
-
-extern unsigned int adm5120_prom_type;
-#define ADM5120_PROM_GENERIC 0
-#define ADM5120_PROM_CFE 1
-#define ADM5120_PROM_MYLOADER 2
-#define ADM5120_PROM_ROUTERBOOT 3
-#define ADM5120_PROM_BOOTBASE 4
-#define ADM5120_PROM_UBOOT 5
-#define ADM5120_PROM_LAST 5
-
-extern unsigned int adm5120_product_code;
-extern unsigned int adm5120_revision;
-extern unsigned int adm5120_nand_boot;
-
-extern unsigned long adm5120_speed;
-#define ADM5120_SPEED_175 175000000
-#define ADM5120_SPEED_200 200000000
-#define ADM5120_SPEED_225 225000000
-#define ADM5120_SPEED_250 250000000
-
-extern unsigned int adm5120_package;
-#define ADM5120_PACKAGE_PQFP 0
-#define ADM5120_PACKAGE_BGA 1
-
-extern unsigned long adm5120_memsize;
-
-enum {
- MACH_ADM5120_GENERIC = 0, /* Generic board */
- MACH_ADM5120_5GXI, /* OSBRiDGE 5GXi/5XLi */
- MACH_ADM5120_BR6104K, /* Edimax BR-6104K */
- MACH_ADM5120_BR6104KP, /* Edimax BR-6104KP */
- MACH_ADM5120_BR61X4WG, /* Edimax BR-6104Wg/BR-6114WG */
- MACH_ADM5120_CAS630, /* Cellvision CAS-630/630W */
- MACH_ADM5120_CAS670, /* Cellvision CAS-670/670W */
- MACH_ADM5120_CAS700, /* Cellvision CAS-700/700W */
- MACH_ADM5120_CAS771, /* Cellvision CAS-771/771W */
- MACH_ADM5120_CAS790, /* Cellvision CAS-790 */
- MACH_ADM5120_CAS861, /* Cellvision CAS-861/861W */
- MACH_ADM5120_EASY5120PATA, /* Infineon EASY 5120P-ATA */
- MACH_ADM5120_EASY5120RT, /* Infineon EASY 5120-RT */
- MACH_ADM5120_EASY5120WVOIP, /* Infineon EASY 5120-WVoIP */
- MACH_ADM5120_EASY83000, /* Infineon EASY-83000 */
- MACH_ADM5120_ES2108, /* ZyXEL Ethernet Switch 2108 */
- MACH_ADM5120_ES2108F, /* ZyXEL Ethernet Switch 2108-F */
- MACH_ADM5120_ES2108G, /* ZyXEL Ethernet Switch 2108-G */
- MACH_ADM5120_ES2108LC, /* ZyXEL Ethernet Switch 2108-LC */
- MACH_ADM5120_ES2108PWR, /* ZyXEL Ethernet Switch 2108-PWR */
- MACH_ADM5120_ES2024A, /* ZyXEL Ethernet Switch 2024A */
- MACH_ADM5120_ES2024PWR, /* ZyXEL Ethernet Switch 2024PWR */
- MACH_ADM5120_HS100, /* ZyXEL HomeSafe 100/100W */
- MACH_ADM5120_NFS101U, /* Cellvision NFS-101U/101WU */
- MACH_ADM5120_NFS202U, /* Cellvision NFS-202U/202WU */
- MACH_ADM5120_NP28G, /* Compex NP28G */
- MACH_ADM5120_NP28GHS, /* Compex NP28G HotSpot */
- MACH_ADM5120_NP27G, /* Compex NP27G */
- MACH_ADM5120_RB_11X, /* Mikrotik RouterBOARD 111/112 */
- MACH_ADM5120_RB_133, /* Mikrotik RouterBOARD 133 */
- MACH_ADM5120_RB_133C, /* Mikrotik RouterBOARD 133c */
- MACH_ADM5120_RB_150, /* Mikrotik RouterBOARD 150 */
- MACH_ADM5120_RB_153, /* Mikrotik RouterBOARD 153 */
- MACH_ADM5120_RB_192, /* Mikrotik RouterBOARD 192 */
- MACH_ADM5120_P334U, /* ZyXEL Prestige 334U */
- MACH_ADM5120_P334W, /* ZyXEL Prestige 334W */
- MACH_ADM5120_P334WH, /* ZyXEL Prestige 334WH */
- MACH_ADM5120_P334WHD, /* ZyXEL Prestige 334WHD */
- MACH_ADM5120_P334WT, /* ZyXEL Prestige 334WT */
- MACH_ADM5120_P335, /* ZyXEL Prestige 335/335WT */
- MACH_ADM5120_P335PLUS, /* ZyXEL Prestige 335Plus */
- MACH_ADM5120_P335U, /* ZyXEL Prestige 335U */
- MACH_ADM5120_PMUGW, /* Motorola Powerline MU Gateway */
- MACH_ADM5120_WP54, /* Compex WP54G/WP54AG/WPP54G/WPP54AG */
- MACH_ADM5120_WP54G_WRT, /* Compex WP54G-WRT */
- MACH_ADM5120_WP54Gv1C, /* Compex WP54G version 1C */
- MACH_ADM5120_EB_214A, /* Generic EB-214A */
-};
-
-/*
- * TODO:remove adm5120_eth* variables when the switch driver will be
- * converted into a real platform driver
- */
-extern unsigned int adm5120_eth_num_ports;
-extern unsigned char adm5120_eth_macs[6][6];
-extern unsigned char adm5120_eth_vlans[6];
-
-extern void adm5120_soc_init(void) __init;
-extern void adm5120_mem_init(void) __init;
-extern void adm5120_ndelay(u32 ns);
-
-extern void (*adm5120_board_reset)(void);
-
-extern void adm5120_gpio_init(void) __init;
-extern void adm5120_gpio_csx0_enable(void) __init;
-extern void adm5120_gpio_csx1_enable(void) __init;
-extern void adm5120_gpio_ew_enable(void) __init;
-
-static inline int adm5120_package_pqfp(void)
-{
- return (adm5120_package == ADM5120_PACKAGE_PQFP);
-}
-
-static inline int adm5120_package_bga(void)
-{
- return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-static inline int adm5120_has_pci(void)
-{
- return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-static inline int adm5120_has_gmii(void)
-{
- return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-#endif /* _MACH_ADM5120_INFO_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h
deleted file mode 100644
index 70dd6bbe85..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * ADM5120 interrupt controller definitions
- *
- * This header file defines the hardware registers of the ADM5120 SoC
- * built-in interrupt controller.
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_INTC_H
-#define _MACH_ADM5120_INTC_H
-
-/*
- * INTC register offsets
- */
-#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */
-#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */
-#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */
-#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */
-#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR
-#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */
-#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */
-#define INTC_REG_IRQ_TEST_SOURCE 0x1C
-#define INTC_REG_IRQ_SOURCE_SELECT 0x20
-#define INTC_REG_INT_LEVEL 0x24
-
-/*
- * INTC IRQ numbers
- */
-#define INTC_IRQ_TIMER 0 /* built in timer */
-#define INTC_IRQ_UART0 1 /* built-in UART0 */
-#define INTC_IRQ_UART1 2 /* built-in UART1 */
-#define INTC_IRQ_USBC 3 /* USB Host Controller */
-#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */
-#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */
-#define INTC_IRQ_PCI0 6 /* PCI slot 2 */
-#define INTC_IRQ_PCI1 7 /* PCI slot 3 */
-#define INTC_IRQ_PCI2 8 /* PCI slot 4 */
-#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */
-#define INTC_IRQ_LAST INTC_IRQ_SWITCH
-#define INTC_IRQ_COUNT 10
-
-/*
- * INTC register bits
- */
-#define INTC_INT_TIMER (1 << INTC_IRQ_TIMER)
-#define INTC_INT_UART0 (1 << INTC_IRQ_UART0)
-#define INTC_INT_UART1 (1 << INTC_IRQ_UART1)
-#define INTC_INT_USBC (1 << INTC_IRQ_USBC)
-#define INTC_INT_INTX0 (1 << INTC_IRQ_INTX0)
-#define INTC_INT_INTX1 (1 << INTC_IRQ_INTX1)
-#define INTC_INT_PCI0 (1 << INTC_IRQ_PCI0)
-#define INTC_INT_PCI1 (1 << INTC_IRQ_PCI1)
-#define INTC_INT_PCI2 (1 << INTC_IRQ_PCI2)
-#define INTC_INT_SWITCH (1 << INTC_IRQ_SWITCH)
-#define INTC_INT_ALL ((1 << INTC_IRQ_COUNT) - 1)
-
-#endif /* _MACH_ADM5120_INTC_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h
deleted file mode 100644
index c4e9591fb8..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * ADM5120 MPMC (Multiport Memory Controller) register definitions
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_MPMC_H
-#define _MACH_ADM5120_MPMC_H
-
-#define MPMC_READ_REG(r) __raw_readl( \
- (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
-#define MPMC_WRITE_REG(r, v) __raw_writel((v), \
- (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
-
-#define MPMC_REG_CTRL 0x0000
-#define MPMC_REG_STATUS 0x0004
-#define MPMC_REG_CONF 0x0008
-#define MPMC_REG_DC 0x0020
-#define MPMC_REG_DR 0x0024
-#define MPMC_REG_DRP 0x0030
-
-#define MPMC_REG_DC0 0x0100
-#define MPMC_REG_DRC0 0x0104
-#define MPMC_REG_DC1 0x0120
-#define MPMC_REG_DRC1 0x0124
-#define MPMC_REG_DC2 0x0140
-#define MPMC_REG_DRC2 0x0144
-#define MPMC_REG_DC3 0x0160
-#define MPMC_REG_DRC3 0x0164
-#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */
-#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */
-#define MPMC_REG_SC2 0x0240
-#define MPMC_REG_WEN2 0x0244
-#define MPMC_REG_OEN2 0x0248
-#define MPMC_REG_RD2 0x024C
-#define MPMC_REG_PG2 0x0250
-#define MPMC_REG_WR2 0x0254
-#define MPMC_REG_TN2 0x0258
-#define MPMC_REG_SC3 0x0260
-
-/* Control register bits */
-#define MPMC_CTRL_AM (1 << 1) /* Address Mirror */
-#define MPMC_CTRL_LPM (1 << 2) /* Low Power Mode */
-#define MPMC_CTRL_DWB (1 << 3) /* Drain Write Buffers */
-
-/* Status register bits */
-#define MPMC_STATUS_BUSY (1 << 0) /* Busy */
-#define MPMC_STATUS_WBS (1 << 1) /* Write Buffer Status */
-#define MPMC_STATUS_SRA (1 << 2) /* Self-Refresh Acknowledge*/
-
-/* Dynamic Control register bits */
-#define MPMC_DC_CE (1 << 0)
-#define MPMC_DC_DMC (1 << 1)
-#define MPMC_DC_SRR (1 << 2)
-#define MPMC_DC_SI_SHIFT 7
-#define MPMC_DC_SI_MASK (3 << 7)
-#define MPMC_DC_SI_NORMAL (0 << 7)
-#define MPMC_DC_SI_MODE (1 << 7)
-#define MPMC_DC_SI_PALL (2 << 7)
-#define MPMC_DC_SI_NOP (3 << 7)
-
-#define SRAM_REG_CONF 0x00
-#define SRAM_REG_WWE 0x04
-#define SRAM_REG_WOE 0x08
-#define SRAM_REG_WRD 0x0C
-#define SRAM_REG_WPG 0x10
-#define SRAM_REG_WWR 0x14
-#define SRAM_REG_WTR 0x18
-
-/* Dynamic Configuration register bits */
-#define DC_BE (1 << 19) /* buffer enable */
-#define DC_RW_SHIFT 28 /* shift for number of rows */
-#define DC_RW_MASK 0x03
-#define DC_NB_SHIFT 26 /* shift for number of banks */
-#define DC_NB_MASK 0x01
-#define DC_CW_SHIFT 22 /* shift for number of columns */
-#define DC_CW_MASK 0x07
-#define DC_DW_SHIFT 7 /* shift for device width */
-#define DC_DW_MASK 0x03
-
-/* Static Configuration register bits */
-#define SC_MW_MASK 0x03 /* memory width mask */
-#define SC_MW_8 0x00 /* 8 bit memory width */
-#define SC_MW_16 0x01 /* 16 bit memory width */
-#define SC_MW_32 0x02 /* 32 bit memory width */
-
-#endif /* _MACH_ADM5120_MPMC_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h
deleted file mode 100644
index 1e2f3bd15d..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * ADM5120 NAND interface definitions
- *
- * This header file defines the hardware registers of the ADM5120 SoC
- * built-in NAND interface.
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * NAND interface routines was based on a driver for Linux 2.6.19+ which
- * was derived from the driver for Linux 2.4.xx published by Mikrotik for
- * their RouterBoard 1xx and 5xx series boards.
- * Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_NAND_H
-#define _MACH_ADM5120_NAND_H
-
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-/* NAND control registers */
-#define NAND_REG_DATA 0x0 /* data register */
-#define NAND_REG_SET_CEn 0x1 /* CE# low */
-#define NAND_REG_CLR_CEn 0x2 /* CE# high */
-#define NAND_REG_CLR_CLE 0x3 /* CLE low */
-#define NAND_REG_SET_CLE 0x4 /* CLE high */
-#define NAND_REG_CLR_ALE 0x5 /* ALE low */
-#define NAND_REG_SET_ALE 0x6 /* ALE high */
-#define NAND_REG_SET_SPn 0x7 /* SP# low (use spare area) */
-#define NAND_REG_CLR_SPn 0x8 /* SP# high (do not use spare area) */
-#define NAND_REG_SET_WPn 0x9 /* WP# low */
-#define NAND_REG_CLR_WPn 0xA /* WP# high */
-#define NAND_REG_STATUS 0xB /* Status register */
-
-#define ADM5120_NAND_STATUS_READY 0x80
-
-#define NAND_READ_REG(r) \
- readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
-#define NAND_WRITE_REG(r, v) \
- writeb((v), (void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
-
-/*-------------------------------------------------------------------------*/
-
-static inline void adm5120_nand_enable(void)
-{
- SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE);
- SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1);
-}
-
-static inline void adm5120_nand_set_wpn(unsigned int set)
-{
- NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1);
-}
-
-static inline void adm5120_nand_set_spn(unsigned int set)
-{
- NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1);
-}
-
-static inline void adm5120_nand_set_cle(unsigned int set)
-{
- NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1);
-}
-
-static inline void adm5120_nand_set_ale(unsigned int set)
-{
- NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1);
-}
-
-static inline void adm5120_nand_set_cen(unsigned int set)
-{
- NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1);
-}
-
-static inline u8 adm5120_nand_get_status(void)
-{
- return NAND_READ_REG(NAND_REG_STATUS);
-}
-
-#endif /* _MACH_ADM5120_NAND_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h
deleted file mode 100644
index ed73b53297..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * ADM5120 specific platform definitions
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_MIPS_MACH_ADM5120_PLATFORM_H
-#define _ASM_MIPS_MACH_ADM5120_PLATFORM_H
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-
-struct adm5120_flash_platform_data {
- void (*set_vpp)(struct map_info *, int);
- void (*switch_bank)(unsigned);
- u32 window_size;
- unsigned int nr_parts;
- struct mtd_partition *parts;
-};
-
-struct adm5120_switch_platform_data {
- /* TODO: not yet implemented */
-};
-
-struct adm5120_pci_irq {
- u8 slot;
- u8 func;
- u8 pin;
- unsigned irq;
-};
-
-#define PCIIRQ(s, f, p, i) {.slot = (s), .func = (f), .pin = (p), .irq = (i)}
-
-#ifdef CONFIG_PCI
-extern void adm5120_pci_set_irq_map(unsigned int nr_irqs,
- struct adm5120_pci_irq *map) __init;
-#else
-static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs,
- struct adm5120_pci_irq *map)
-{
-}
-#endif
-
-extern void adm5120_setup_eth_macs(u8 *mac_base) __init;
-
-extern struct adm5120_flash_platform_data adm5120_flash0_data;
-extern struct adm5120_flash_platform_data adm5120_flash1_data;
-
-extern void adm5120_add_device_flash(unsigned id) __init;
-extern void adm5120_add_device_usb(void) __init;
-extern void adm5120_add_device_uart(unsigned id) __init;
-extern void adm5120_add_device_nand(struct platform_nand_data *pdata) __init;
-extern void adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) __init;
-extern void adm5120_register_gpio_buttons(int id,
- unsigned poll_interval,
- unsigned nbuttons,
- struct gpio_keys_button *buttons);
-
-#define GPIO_LED_DEF(g, n, t, a) { \
- .name = (n), \
- .default_trigger = (t), \
- .gpio = (g), \
- .active_low = (a) \
-}
-
-#define GPIO_LED_STD(g, n, t) GPIO_LED_DEF((g), (n), (t), 0)
-#define GPIO_LED_INV(g, n, t) GPIO_LED_DEF((g), (n), (t), 1)
-
-extern void adm5120_add_device_gpio_leds(unsigned num_leds,
- struct gpio_led *leds) __init;
-
-#endif /* _ASM_MIPS_MACH_ADM5120_PLATFORM_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h
deleted file mode 100644
index 91adc5bae9..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * ADM5120 ethernet switch definitions
- *
- * This header file defines the hardware registers of the ADM5120 SoC
- * built-in Ethernet switch.
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_SWITCH_H
-#define _MACH_ADM5120_SWITCH_H
-
-#ifndef BIT
-# define BIT(at) (1 << (at))
-#endif
-#define BITMASK(len) (BIT(len)-1)
-
-#define SW_READ_REG(r) __raw_readl( \
- (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-#define SW_WRITE_REG(r, v) __raw_writel((v), \
- (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-
-/* Switch register offsets */
-#define SWITCH_REG_CODE 0x0000
-#define SWITCH_REG_SOFT_RESET 0x0004 /* Soft Reset */
-#define SWITCH_REG_BOOT_DONE 0x0008 /* Boot Done */
-#define SWITCH_REG_SW_RESET 0x000C /* Switch Reset */
-#define SWITCH_REG_PHY_STATUS 0x0014 /* PHY Status */
-#define SWITCH_REG_MEMCTRL 0x001C /* Memory Control */
-#define SWITCH_REG_CPUP_CONF 0x0024 /* CPU Port Configuration */
-#define SWITCH_REG_PORT_CONF0 0x0028 /* Port Configuration 0 */
-#define SWITCH_REG_PORT_CONF1 0x002C /* Port Configuration 1 */
-#define SWITCH_REG_PORT_CONF2 0x0030 /* Port Configuration 2 */
-#define SWITCH_REG_VLAN_G1 0x0040 /* VLAN group 1 */
-#define SWITCH_REG_VLAN_G2 0x0044 /* VLAN group 2 */
-#define SWITCH_REG_SEND_TRIG 0x0048 /* Send Trigger */
-#define SWITCH_REG_MAC_WT0 0x0058 /* MAC Write Address 0 */
-#define SWITCH_REG_MAC_WT1 0x005C /* MAC Write Address 1 */
-#define SWITCH_REG_BW_CNTL0 0x0060 /* Bandwidth Control 0 */
-#define SWITCH_REG_BW_CNTL1 0x0064 /* Bandwidth Control 1 */
-#define SWITCH_REG_PHY_CNTL0 0x0068 /* PHY Control 0 */
-#define SWITCH_REG_PHY_CNTL1 0x006C /* PHY Control 1 */
-#define SWITCH_REG_PORT_TH 0x0078 /* Port Threshold */
-#define SWITCH_REG_PHY_CNTL2 0x007C /* PHY Control 2 */
-#define SWITCH_REG_PHY_CNTL3 0x0080 /* PHY Control 3 */
-#define SWITCH_REG_PRI_CNTL 0x0084 /* Priority Control */
-#define SWITCH_REG_PHY_CNTL4 0x00A0 /* PHY Control 4 */
-#define SWITCH_REG_EMPTY_CNT 0x00A4 /* Empty Count */
-#define SWITCH_REG_PORT_CNTLS 0x00A8 /* Port Control Select */
-#define SWITCH_REG_PORT_CNTL 0x00AC /* Port Control */
-#define SWITCH_REG_INT_STATUS 0x00B0 /* Interrupt Status */
-#define SWITCH_REG_INT_MASK 0x00B4 /* Interrupt Mask */
-#define SWITCH_REG_GPIO_CONF0 0x00B8 /* GPIO Configuration 0 */
-#define SWITCH_REG_GPIO_CONF2 0x00BC /* GPIO Configuration 1 */
-#define SWITCH_REG_WDOG0 0x00C0 /* Watchdog 0 */
-#define SWITCH_REG_WDOG1 0x00C4 /* Watchdog 1 */
-
-#define SWITCH_REG_SHDA 0x00D0 /* Send High Descriptors Address */
-#define SWITCH_REG_SLDA 0x00D4 /* Send Low Descriptors Address */
-#define SWITCH_REG_RHDA 0x00D8 /* Receive High Descriptor Address */
-#define SWITCH_REG_RLDA 0x00DC /* Receive Low Descriptor Address */
-#define SWITCH_REG_SHWA 0x00E0 /* Send High Working Address */
-#define SWITCH_REG_SLWA 0x00E4 /* Send Low Working Address */
-#define SWITCH_REG_RHWA 0x00E8 /* Receive High Working Address */
-#define SWITCH_REG_RLWA 0x00EC /* Receive Low Working Address */
-
-#define SWITCH_REG_TIMER_INT 0x00F0 /* Timer */
-#define SWITCH_REG_TIMER 0x00F4 /* Timer Interrupt */
-
-#define SWITCH_REG_PORT0_LED 0x0100
-#define SWITCH_REG_PORT1_LED 0x0104
-#define SWITCH_REG_PORT2_LED 0x0108
-#define SWITCH_REG_PORT3_LED 0x010C
-#define SWITCH_REG_PORT4_LED 0x0110
-
-/* CODE register bits */
-#define CODE_PC_MASK BITMASK(16) /* Product Code */
-#define CODE_REV_SHIFT 16
-#define CODE_REV_MASK BITMASK(4) /* Product Revision */
-#define CODE_CLKS_SHIFT 20
-#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */
-#define CODE_CLKS_175 0 /* 175 MHz */
-#define CODE_CLKS_200 1 /* 200 MHz */
-#define CODE_CLKS_225 2 /* 225 MHz */
-#define CODE_CLKS_250 3 /* 250 MHz */
-#define CODE_NAB BIT(24) /* NAND boot */
-#define CODE_PK_MASK BITMASK(1) /* Package type */
-#define CODE_PK_SHIFT 29
-#define CODE_PK_BGA 0 /* BGA package */
-#define CODE_PK_PQFP 1 /* PQFP package */
-
-/* MEMCTRL register bits */
-#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */
-#define MEMCTRL_SDRS_4M 0x01
-#define MEMCTRL_SDRS_8M 0x02
-#define MEMCTRL_SDRS_16M 0x03
-#define MEMCTRL_SDRS_64M 0x04
-#define MEMCTRL_SDRS_128M 0x05
-#define MEMCTRL_SDR1_ENABLE BIT(5) /* enable SDRAM bank 1 */
-
-#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */
-#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */
-#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */
-#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */
-#define MEMCTRL_SRS_512K 0x01 /* 512KB*/
-#define MEMCTRL_SRS_1M 0x02 /* 1MB */
-#define MEMCTRL_SRS_2M 0x03 /* 2MB */
-#define MEMCTRL_SRS_4M 0x04 /* 4MB */
-
-/* Port bits used in various registers */
-#define SWITCH_PORT_PHY0 BIT(0)
-#define SWITCH_PORT_PHY1 BIT(1)
-#define SWITCH_PORT_PHY2 BIT(2)
-#define SWITCH_PORT_PHY3 BIT(3)
-#define SWITCH_PORT_PHY4 BIT(4)
-#define SWITCH_PORT_MII BIT(5)
-#define SWITCH_PORT_CPU BIT(6)
-
-/* Port bit shorthands */
-#define SWITCH_PORTS_PHY 0x1F /* phy ports */
-#define SWITCH_PORTS_NOCPU 0x3F /* physical ports */
-#define SWITCH_PORTS_ALL 0x7F /* all ports */
-
-/* CPUP_CONF register bits */
-#define CPUP_CONF_DCPUP BIT(0) /* Disable CPU port */
-#define CPUP_CONF_CRCP BIT(1) /* CRC padding from CPU */
-#define CPUP_CONF_BTM BIT(2) /* Bridge Testing Mode */
-#define CPUP_CONF_DUNP_SHIFT 9 /* Disable Unknown Packets for portX */
-#define CPUP_CONF_DMCP_SHIFT 16 /* Disable Mcast Packets form portX */
-#define CPUP_CONF_DBCP_SHIFT 24 /* Disable Bcast Packets form portX */
-
-/* PORT_CONF0 register bits */
-#define PORT_CONF0_DP_SHIFT 0 /* Disable Port */
-#define PORT_CONF0_EMCP_SHIFT 8 /* Enable All MC Packets */
-#define PORT_CONF0_BP_SHIFT 16 /* Enable Back Pressure */
-
-/* PORT_CONF1 register bits */
-#define PORT_CONF1_DISL_SHIFT 0 /* Disable Learning */
-#define PORT_CONF1_BS_SHIFT 6 /* Blocking State */
-#define PORT_CONF1_BM_SHIFT 12 /* Blocking Mode */
-
-/* SEND_TRIG register bits */
-#define SEND_TRIG_STL BIT(0) /* Send Trigger Low */
-#define SEND_TRIG_STH BIT(1) /* Send Trigger High */
-
-/* MAC_WT0 register bits */
-#define MAC_WT0_MAWC BIT(0) /* MAC address write command */
-#define MAC_WT0_MWD_SHIFT 1
-#define MAC_WT0_MWD BIT(1) /* MAC write done */
-#define MAC_WT0_WFB BIT(2) /* Write Filter Bit */
-#define MAC_WT0_WVN_SHIFT 3 /* Write Vlan Number shift */
-#define MAC_WT0_WVE BIT(6) /* Write VLAN enable */
-#define MAC_WT0_WPMN_SHIFT 7
-#define MAC_WT0_WAF_SHIFT 13 /* Write Age Field shift */
-#define MAC_WT0_WAF_EMPTY 0
-#define MAC_WT0_WAF_STATIC 7 /* age: static */
-#define MAC_WT0_MAC0_SHIFT 16
-#define MAC_WT0_MAC1_SHIFT 24
-
-/* MAC_WT1 register bits */
-#define MAC_WT1_MAC2_SHIFT 0
-#define MAC_WT1_MAC3_SHIFT 8
-#define MAC_WT1_MAC4_SHIFT 16
-#define MAC_WT1_MAC5_SHIFT 24
-
-/* BW_CNTL0/BW_CNTL1 register bits */
-#define BW_CNTL_DISABLE 0x00
-#define BW_CNTL_64K 0x01
-#define BW_CNTL_128K 0x02
-#define BW_CNTL_256K 0x03
-#define BW_CNTL_512K 0x04
-#define BW_CNTL_1M 0x05
-#define BW_CNTL_4M 0x06
-#define BW_CNTL_10M 0x07
-
-#define P4TBC_SHIFT 0
-#define P4RBC_SHIFT 4
-#define P5TBC_SHIFT 8
-#define P5RBC_SHIFT 12
-
-#define BW_CNTL1_NAND_ENABLE 0x100
-
-/* PHY_CNTL0 register bits */
-#define PHY_CNTL0_PHYA_MASK BITMASK(5)
-#define PHY_CNTL0_PHYR_MASK BITMASK(5)
-#define PHY_CNTL0_PHYR_SHIFT 8
-#define PHY_CNTL0_WC BIT(13) /* Write Command */
-#define PHY_CNTL0_RC BIT(14) /* Read Command */
-#define PHY_CNTL0_WTD_MASK BIT(16) /* Read Command */
-#define PHY_CNTL0_WTD_SHIFT 16
-
-/* PHY_CNTL1 register bits */
-#define PHY_CNTL1_WOD BIT(0) /* Write Operation Done */
-#define PHY_CNTL1_ROD BIT(1) /* Read Operation Done */
-#define PHY_CNTL1_RD_MASK BITMASK(16)
-#define PHY_CNTL1_RD_SHIFT 16
-
-/* PHY_CNTL2 register bits */
-#define PHY_CNTL2_ANE_SHIFT 0 /* Auto Negotiation Enable */
-#define PHY_CNTL2_SC_SHIFT 5 /* Speed Control */
-#define PHY_CNTL2_DC_SHIFT 10 /* Duplex Control */
-#define PHY_CNTL2_FNCV_SHIFT 15 /* Recommended FC Value */
-#define PHY_CNTL2_PHYR_SHIFT 20 /* PHY reset */
-#define PHY_CNTL2_AMDIX_SHIFT 25 /* Auto MDIX enable */
-/* PHY_CNTL2_RMAE is bad in datasheet */
-#define PHY_CNTL2_RMAE BIT(31) /* Recommended MCC Average enable */
-
-/* PHY_CNTL3 register bits */
-#define PHY_CNTL3_RNT BIT(10) /* Recommend Normal Threshold */
-
-/* PORT_TH register bits */
-#define PORT_TH_PPT_MASK BITMASK(8) /* Per Port Threshold */
-#define PORT_TH_CPUT_SHIFT 8 /* CPU Port Buffer Threshold */
-#define PORT_TH_CPUT_MASK BITMASK(8)
-#define PORT_TH_CPUHT_SHIFT 16 /* CPU Hold Threshold */
-#define PORT_TH_CPUHT_MASK BITMASK(8)
-#define PORT_TH_CPURT_SHIFT 24 /* CPU Release Threshold */
-#define PORT_TH_CPURT_MASK BITMASK(8)
-
-/* EMPTY_CNT register bits */
-#define EMPTY_CNT_EBGB_MASK BITMASK(9) /* Empty Blocks in the Global Buffer */
-
-/* GPIO_CONF0 register bits */
-#define GPIO_CONF0_MASK BITMASK(8)
-#define GPIO_CONF0_IM_SHIFT 0
-#define GPIO_CONF0_IV_SHIFT 8
-#define GPIO_CONF0_OE_SHIFT 16
-#define GPIO_CONF0_OV_SHIFT 24
-#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT)
-#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT)
-#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT)
-#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT)
-
-/* GPIO_CONF2 register bits */
-#define GPIO_CONF2_CSX0 BIT(4) /* enable CSX0:INTX0 on GPIO 1:2 */
-#define GPIO_CONF2_CSX1 BIT(5) /* enable CSX1:INTX1 on GPIO 3:4 */
-#define GPIO_CONF2_EW BIT(6) /* enable wait state pin for CSX0/1 */
-
-/* INT_STATUS/INT_MASK register bits */
-#define SWITCH_INT_SHD BIT(0) /* Send High Done */
-#define SWITCH_INT_SLD BIT(1) /* Send Low Done */
-#define SWITCH_INT_RHD BIT(2) /* Receive High Done */
-#define SWITCH_INT_RLD BIT(3) /* Receive Low Done */
-#define SWITCH_INT_HDF BIT(4) /* High Descriptor Full */
-#define SWITCH_INT_LDF BIT(5) /* Low Descriptor Full */
-#define SWITCH_INT_P0QF BIT(6) /* Port0 Queue Full */
-#define SWITCH_INT_P1QF BIT(7) /* Port1 Queue Full */
-#define SWITCH_INT_P2QF BIT(8) /* Port2 Queue Full */
-#define SWITCH_INT_P3QF BIT(9) /* Port3 Queue Full */
-#define SWITCH_INT_P4QF BIT(10) /* Port4 Queue Full */
-#define SWITCH_INT_P5QF BIT(11) /* Port5 Queue Full */
-#define SWITCH_INT_CPQF BIT(13) /* CPU Queue Full */
-#define SWITCH_INT_GQF BIT(14) /* Global Queue Full */
-#define SWITCH_INT_MD BIT(15) /* Must Drop */
-#define SWITCH_INT_BCS BIT(16) /* BC Storm */
-#define SWITCH_INT_PSC BIT(18) /* Port Status Change */
-#define SWITCH_INT_ID BIT(19) /* Intruder Detected */
-#define SWITCH_INT_W0TE BIT(20) /* Watchdog 0 Timer Expired */
-#define SWITCH_INT_W1TE BIT(21) /* Watchdog 1 Timer Expired */
-#define SWITCH_INT_RDE BIT(22) /* Receive Descriptor Error */
-#define SWITCH_INT_SDE BIT(23) /* Send Descriptor Error */
-#define SWITCH_INT_CPUH BIT(24) /* CPU Hold */
-
-/* TIMER_INT register bits */
-#define TIMER_INT_TOS BIT(0) /* time-out status */
-#define TIMER_INT_TOM BIT(16) /* mask time-out interrupt */
-
-/* TIMER register bits */
-#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */
-#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */
-#define TIMER_TE BIT(16) /* timer enable bit */
-
-/* PORTx_LED register bits */
-#define LED_MODE_MASK BITMASK(4)
-#define LED_MODE_INPUT 0
-#define LED_MODE_FLASH 1
-#define LED_MODE_OUT_HIGH 2
-#define LED_MODE_OUT_LOW 3
-#define LED_MODE_LINK 4
-#define LED_MODE_SPEED 5
-#define LED_MODE_DUPLEX 6
-#define LED_MODE_ACT 7
-#define LED_MODE_COLL 8
-#define LED_MODE_LINK_ACT 9
-#define LED_MODE_DUPLEX_COLL 10
-#define LED_MODE_10M_ACT 11
-#define LED_MODE_100M_ACT 12
-#define LED0_MODE_SHIFT 0 /* LED0 mode shift */
-#define LED1_MODE_SHIFT 4 /* LED1 mode shift */
-#define LED2_MODE_SHIFT 8 /* LED2 mode shift */
-#define LED0_IV_SHIFT 12 /* LED0 input value shift */
-#define LED1_IV_SHIFT 13 /* LED1 input value shift */
-#define LED2_IV_SHIFT 14 /* LED2 input value shift */
-
-#endif /* _MACH_ADM5120_SWITCH_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h
deleted file mode 100644
index 81d3067da3..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * ADM5120 UART definitions
- *
- * This header file defines the hardware registers of the ADM5120 SoC
- * built-in UARTs.
- *
- * Copyright (C) 2007 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_UART_H
-#define _MACH_ADM5120_UART_H
-
-#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
-
-#define UART_REG_DATA 0x00
-#define UART_REG_RSR 0x04
-#define UART_REG_ECR UART_REG_RSR
-#define UART_REG_LCRH 0x08
-#define UART_REG_LCRM 0x0C
-#define UART_REG_LCRL 0x10
-#define UART_REG_CTRL 0x14
-#define UART_REG_FLAG 0x18
-
-/* Receive Status Register bits */
-#define UART_RSR_FE (1 << 0)
-#define UART_RSR_PE (1 << 1)
-#define UART_RSR_BE (1 << 2)
-#define UART_RSR_OE (1 << 3)
-#define UART_RSR_ERR (UART_RSR_FE | UART_RSR_PE | UART_RSR_BE)
-
-#define UART_ECR_ALL 0xFF
-
-/* Line Control High register bits */
-#define UART_LCRH_BRK (1 << 0) /* send break */
-#define UART_LCRH_PEN (1 << 1) /* parity enable */
-#define UART_LCRH_EPS (1 << 2) /* even parity select */
-#define UART_LCRH_STP1 (0 << 3) /* one stop bits select */
-#define UART_LCRH_STP2 (1 << 3) /* two stop bits select */
-#define UART_LCRH_FEN (1 << 4) /* FIFO enable */
-
-#define UART_LCRH_WLEN5 (0 << 5)
-#define UART_LCRH_WLEN6 (1 << 5)
-#define UART_LCRH_WLEN7 (2 << 5)
-#define UART_LCRH_WLEN8 (3 << 5)
-
-/* Control register bits */
-#define UART_CTRL_EN (1 << 0)
-
-/* Flag register bits */
-#define UART_FLAG_CTS (1 << 0)
-#define UART_FLAG_DSR (1 << 1)
-#define UART_FLAG_DCD (1 << 2)
-#define UART_FLAG_BUSY (1 << 3)
-#define UART_FLAG_RXFE (1 << 4)
-#define UART_FLAG_TXFF (1 << 5)
-#define UART_FLAG_RXFF (1 << 6)
-#define UART_FLAG_TXFE (1 << 7)
-
-#endif /* _MACH_ADM5120_UART_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h
deleted file mode 100644
index 503843db15..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- * from .s file by awk -f s2h.awk
- */
-/* Size definitions
- * Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_16 0x00000010
-#define SZ_256 0x00000100
-#define SZ_512 0x00000200
-
-#define SZ_1K 0x00000400
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_32M 0x02000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif
-
-/* END */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h
deleted file mode 100644
index c6310cc6e6..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * ADM5120 specific CPU feature overrides
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was derived from: include/asm-mips/cpu-features.h
- * Copyright (C) 2003, 2004 Ralf Baechle
- * Copyright (C) 2004 Maciej W. Rozycki
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
-
-/*
- * The ADM5120 SOC has a built-in MIPS 4Kc core.
- */
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_3k_cache 0
-#define cpu_has_4k_cache 1
-#define cpu_has_tx39_cache 0
-#define cpu_has_sb1_cache 0
-#define cpu_has_fpu 0
-#define cpu_has_32fpr 0
-#define cpu_has_counter 1
-#define cpu_has_watch 1
-#define cpu_has_divec 1
-/* #define cpu_has_vce ? */
-/* #define cpu_has_cache_cdex_p ? */
-/* #define cpu_has_cache_cdex_s ? */
-#define cpu_has_prefetch 1
-/* #define cpu_has_mcheck ? */
-#define cpu_has_ejtag 1
-#define cpu_has_llsc 1
-
-#define cpu_has_mips16 0
-#define cpu_has_mdmx 0
-#define cpu_has_mips3d 0
-#define cpu_has_smartmips 0
-
-/* #define cpu_has_vtag_icache ? */
-/* #define cpu_has_dc_aliases ? */
-/* #define cpu_has_ic_fills_f_dc ? */
-/* #define cpu_has_pindexed_dcache ? */
-
-/* #define cpu_icache_snoops_remote_store ? */
-
-#define cpu_has_mips32r1 1
-#define cpu_has_mips32r2 0
-#define cpu_has_mips64r1 0
-#define cpu_has_mips64r2 0
-
-#define cpu_has_dsp 0
-#define cpu_has_mipsmt 0
-
-/* #define cpu_has_nofpuex ? */
-#define cpu_has_64bits 0
-#define cpu_has_64bit_zero_reg 0
-#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
-
-/* #define cpu_has_inclusive_pcaches ? */
-
-#define cpu_dcache_line_size() 16
-#define cpu_icache_line_size() 16
-
-#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h
deleted file mode 100644
index 7ba7efca1f..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * ADM5120 GPIO wrappers for arch-neutral GPIO calls
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_MIPS_MACH_ADM5120_GPIO_H
-#define _ASM_MIPS_MACH_ADM5120_GPIO_H
-
-#define ARCH_NR_GPIOS 64
-
-#include <asm-generic/gpio.h>
-
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define ADM5120_GPIO_PIN0 0
-#define ADM5120_GPIO_PIN1 1
-#define ADM5120_GPIO_PIN2 2
-#define ADM5120_GPIO_PIN3 3
-#define ADM5120_GPIO_PIN4 4
-#define ADM5120_GPIO_PIN5 5
-#define ADM5120_GPIO_PIN6 6
-#define ADM5120_GPIO_PIN7 7
-#define ADM5120_GPIO_P0L0 8
-#define ADM5120_GPIO_P0L1 9
-#define ADM5120_GPIO_P0L2 10
-#define ADM5120_GPIO_P1L0 11
-#define ADM5120_GPIO_P1L1 12
-#define ADM5120_GPIO_P1L2 13
-#define ADM5120_GPIO_P2L0 14
-#define ADM5120_GPIO_P2L1 15
-#define ADM5120_GPIO_P2L2 16
-#define ADM5120_GPIO_P3L0 17
-#define ADM5120_GPIO_P3L1 18
-#define ADM5120_GPIO_P3L2 19
-#define ADM5120_GPIO_P4L0 20
-#define ADM5120_GPIO_P4L1 21
-#define ADM5120_GPIO_P4L2 22
-#define ADM5120_GPIO_MAX 22
-#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1
-
-#define ADM5120_GPIO_LOW 0
-#define ADM5120_GPIO_HIGH 1
-
-#define ADM5120_GPIO_SWITCH 0x10
-#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH)
-#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK)
-#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED)
-#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX)
-#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT)
-#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL)
-#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT)
-#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL)
-#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT)
-#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT)
-
-extern int __adm5120_gpio0_get_value(unsigned gpio);
-extern void __adm5120_gpio0_set_value(unsigned gpio, int value);
-extern int __adm5120_gpio1_get_value(unsigned gpio);
-extern void __adm5120_gpio1_set_value(unsigned gpio, int value);
-extern int adm5120_gpio_to_irq(unsigned gpio);
-extern int adm5120_irq_to_gpio(unsigned irq);
-
-static inline int gpio_get_value(unsigned gpio)
-{
- int ret;
-
- switch (gpio) {
- case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7:
- ret = __adm5120_gpio0_get_value(gpio);
- break;
- case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2:
- ret = __adm5120_gpio1_get_value(gpio - ADM5120_GPIO_P0L0);
- break;
- default:
- ret = __gpio_get_value(gpio);
- break;
- }
-
- return ret;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- switch (gpio) {
- case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7:
- __adm5120_gpio0_set_value(gpio, value);
- break;
- case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2:
- __adm5120_gpio1_set_value(gpio - ADM5120_GPIO_P0L0, value);
- break;
- default:
- __gpio_set_value(gpio, value);
- break;
- }
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return adm5120_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return adm5120_irq_to_gpio(irq);
-}
-
-#define gpio_cansleep __gpio_cansleep
-
-#endif /* _ASM_MIPS_MACH_ADM5120_GPIO_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h
deleted file mode 100644
index b0350c8b83..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * ADM5120 specific IRQ numbers
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef _ASM_MIPS_MACH_ADM5120_IRQ_H
-#define _ASM_MIPS_MACH_ADM5120_IRQ_H
-
-#define MIPS_CPU_IRQ_BASE 0
-#define NR_IRQS 24
-
-#include_next <irq.h>
-
-#include <asm/mach-adm5120/adm5120_intc.h>
-
-#define NO_IRQ (-1)
-
-#define MIPS_CPU_IRQ_COUNT 8
-#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
-
-#define ADM5120_INTC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_IRQ_COUNT)
-#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x))
-
-#define ADM5120_IRQ_INTC MIPS_CPU_IRQ(2)
-#define ADM5120_IRQ_COUNTER MIPS_CPU_IRQ(7)
-
-#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
-#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0)
-#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1)
-#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC)
-#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
-#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
-#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
-#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
-#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
-#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
-
-#endif /* _ASM_MIPS_MACH_ADM5120_IRQ_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h
deleted file mode 100644
index fa42bf7148..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * ADMBoot specific definitions
- *
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ADMBOOT_H
-#define _ADMBOOT_H
-
-extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init;
-
-#endif /* _ADMBOOT_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h
deleted file mode 100644
index 0cb3eee70e..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Broadcom's CFE definitions
- *
- * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_CFE_H_
-#define _PROM_CFE_H_
-
-extern int cfe_present(void) __init;
-extern char *cfe_getenv(char *);
-
-#endif /*_PROM_CFE_H_*/
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h
deleted file mode 100644
index 778df24677..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Generic prom definitions
- *
- * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_GENERIC_H_
-#define _PROM_GENERIC_H_
-
-extern int generic_prom_present(void) __init;
-extern char *generic_prom_getenv(char *);
-
-#endif /*_PROM_GENERIC_H_*/
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h
deleted file mode 100644
index ea8db81ed3..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Compex's MyLoader specific definitions
- *
- * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _MYLOADER_H_
-#define _MYLOADER_H_
-
-/*
- * Firmware file format:
- *
- * <header>
- * [<block descriptor 0>]
- * ...
- * [<block descriptor n>]
- * <null block descriptor>
- * [<block data 0>]
- * ...
- * [<block data n>]
- *
- *
- */
-
-/* Myloader specific magic numbers */
-#define MYLO_MAGIC_FIRMWARE 0x4C594D00
-#define MYLO_MAGIC_20021103 0x20021103
-#define MYLO_MAGIC_20021107 0x20021107
-
-#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
-#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
-#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
-
-/*
- * Addresses of the data structures provided by MyLoader
- */
-#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
-#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
-#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
-#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
-
-/* Vendor ID's (seems to be same as the PCI vendor ID's) */
-#define VENID_COMPEX 0x11F6
-
-/* Devices based on the ADM5120 */
-#define DEVID_COMPEX_NP27G 0x0078
-#define DEVID_COMPEX_NP28G 0x044C
-#define DEVID_COMPEX_NP28GHS 0x044E
-#define DEVID_COMPEX_WP54Gv1C 0x0514
-#define DEVID_COMPEX_WP54G 0x0515
-#define DEVID_COMPEX_WP54AG 0x0546
-#define DEVID_COMPEX_WPP54AG 0x0550
-#define DEVID_COMPEX_WPP54G 0x0555
-
-/* Devices based on the IXP422 */
-#define DEVID_COMPEX_WP18 0x047E
-#define DEVID_COMPEX_NP18A 0x0489
-
-/* Other devices */
-#define DEVID_COMPEX_NP26G8M 0x03E8
-#define DEVID_COMPEX_NP26G16M 0x03E9
-
-struct mylo_fw_header {
- uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
- uint32_t crc; /* CRC of the whole firmware */
- uint32_t res0; /* unknown/unused */
- uint32_t res1; /* unknown/unused */
- uint16_t vid; /* vendor ID */
- uint16_t did; /* device ID */
- uint16_t svid; /* sub vendor ID */
- uint16_t sdid; /* sub device ID */
- uint32_t rev; /* device revision */
- uint32_t fwhi; /* FIXME: firmware version high? */
- uint32_t fwlo; /* FIXME: firmware version low? */
- uint32_t flags; /* firmware flags */
-};
-
-#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
-#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
-
-struct mylo_fw_blockdesc {
- uint32_t type; /* block type */
- uint32_t addr; /* relative address to flash start */
- uint32_t dlen; /* size of block data in bytes */
- uint32_t blen; /* total size of block in bytes */
-};
-
-#define FW_DESC_TYPE_UNUSED 0
-#define FW_DESC_TYPE_USED 1
-
-struct mylo_partition {
- uint16_t flags; /* partition flags */
- uint16_t type; /* type of the partition */
- uint32_t addr; /* relative address of the partition from the
- flash start */
- uint32_t size; /* size of the partition in bytes */
- uint32_t param; /* if this is the active partition, the
- MyLoader load code to this address */
-};
-
-#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
- * MyLoader loads firmware from here */
-#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
-#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
-#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
- * before decompression */
-#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
-
-#define PARTITION_TYPE_FREE 0
-#define PARTITION_TYPE_USED 1
-
-#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
- partition table */
-
-struct mylo_partition_table {
- uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
- uint32_t res0; /* unknown/unused */
- uint32_t res1; /* unknown/unused */
- uint32_t res2; /* unknown/unused */
- struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
-};
-
-struct mylo_partition_header {
- uint32_t len; /* length of the partition data */
- uint32_t crc; /* CRC value of the partition data */
-};
-
-struct mylo_system_params {
- uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
- uint32_t res0;
- uint32_t res1;
- uint32_t mylo_ver;
- uint16_t vid; /* Vendor ID */
- uint16_t did; /* Device ID */
- uint16_t svid; /* Sub Vendor ID */
- uint16_t sdid; /* Sub Device ID */
- uint32_t rev; /* device revision */
- uint32_t fwhi;
- uint32_t fwlo;
- uint32_t tftp_addr;
- uint32_t prog_start;
- uint32_t flash_size; /* Size of boot FLASH in bytes */
- uint32_t dram_size; /* Size of onboard RAM in bytes */
-};
-
-
-struct mylo_eth_addr {
- uint8_t mac[6];
- uint8_t csum[2];
-};
-
-#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
- in the board parameters */
-
-struct mylo_board_params {
- uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
- uint32_t res0;
- uint32_t res1;
- uint32_t res2;
- struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
-};
-
-struct myloader_info {
- u32 vid;
- u32 did;
- u32 svid;
- u32 sdid;
- uint8_t macs[MYLO_ETHADDR_COUNT][6];
-};
-
-extern struct myloader_info myloader_info;
-extern int myloader_present(void) __init;
-
-#endif /* _MYLOADER_H_*/
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
deleted file mode 100644
index 91ac05a630..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Mikrotik's RouterBOOT definitions
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_ROUTERBOOT_H_
-#define _PROM_ROUTERBOOT_H_
-
-struct rb_bios_settings {
- u32 hs_offs; /* hard settings offset */
- u32 hs_size; /* hard settings size */
- u32 fw_offs; /* firmware offset */
- u32 ss_offs; /* soft settings offset */
- u32 ss_size; /* soft settings size */
-};
-
-struct rb_hard_settings {
- char *name; /* board name */
- char *bios_ver; /* BIOS version */
- u32 mem_size; /* memory size in bytes */
- u32 mac_count; /* number of mac addresses */
- u8 *mac_base; /* mac address base */
-};
-
-extern int routerboot_present(void) __init;
-extern char *routerboot_get_boardname(void);
-
-extern struct rb_hard_settings rb_hs;
-
-#endif /* _PROM_ROUTERBOOT_H_ */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h
deleted file mode 100644
index d1e3e5b941..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * ZyNOS (ZyXEL's Networking OS) definitions
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ZYNOS_H
-#define _ZYNOS_H
-
-#define ZYNOS_NAME_LEN 32
-#define ZYNOS_FEAT_BYTES 22
-#define ZYNOS_MAC_LEN 6
-
-struct zynos_board_info {
- unsigned char vendor[ZYNOS_NAME_LEN];
- unsigned char product[ZYNOS_NAME_LEN];
- u32 bootext_addr;
- u32 res0;
- u16 board_id;
- u8 res1[6];
- u8 feat_other[ZYNOS_FEAT_BYTES];
- u8 feat_main;
- u8 res2;
- u8 mac[ZYNOS_MAC_LEN];
- u8 country;
- u8 dbgflag;
-} __attribute__ ((packed));
-
-/*
- * Vendor IDs
- */
-#define ZYNOS_VENDOR_ID_ZYXEL 0
-#define ZYNOS_VENDOR_ID_NETGEAR 1
-#define ZYNOS_VENDOR_ID_DLINK 2
-#define ZYNOS_VENDOR_ID_OTHER 3
-#define ZYNOS_VENDOR_ID_LUCENT 4
-
-/*
- * Vendor names
- */
-#define ZYNOS_VENDOR_DLINK "D-Link"
-#define ZYNOS_VENDOR_LUCENT "LUCENT"
-#define ZYNOS_VENDOR_NETGEAR "NetGear"
-#define ZYNOS_VENDOR_ZYXEL "ZyXEL"
-
-/*
- * Board IDs (big-endian)
- */
-#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */
-#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */
-#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */
-#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */
-#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */
-#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */
-#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */
-#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */
-#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */
-#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */
-#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */
-#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */
-#define ZYNOS_BOARD_P334WT_ALT 0x9F02 /* Prestige 334WT alternative*/
-#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */
-#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */
-#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */
-
-/*
- * Some magic numbers (big-endian)
- */
-#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */
-#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */
-
-struct bootbase_info {
- u16 vendor_id;
- u16 board_id;
- u8 mac[6];
-};
-
-extern struct bootbase_info bootbase_info;
-extern int bootbase_present(void) __init;
-
-#endif /* _ZYNOS_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h
deleted file mode 100644
index 87c35f375b..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H
-#define __ASM_MIPS_MACH_ADM5120_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define RM9000_CDEX_SMP_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */
diff --git a/target/linux/adm5120/files-3.18/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120/files-3.18/arch/mips/pci/pci-adm5120.c
deleted file mode 100644
index f8d359806a..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/pci/pci-adm5120.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * ADM5120 PCI Host Controller driver
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- * done by Jeroen Vreeken
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- * Jeroen's code was based on the Linux 2.4.xx source codes found in various
- * tarballs released by Edimax for it's ADM5120 based devices
- * Copyright (C) ADMtek Incorporated
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/pci_regs.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(f, a...) printk(KERN_DEBUG f, ## a)
-#else
-#define DBG(f, a...) do {} while (0)
-#endif
-
-#define PCI_ENABLE 0x80000000
-
-/* -------------------------------------------------------------------------*/
-
-static unsigned int adm5120_pci_nr_irqs __initdata;
-static struct adm5120_pci_irq *adm5120_pci_irq_map __initdata;
-
-static DEFINE_SPINLOCK(pci_lock);
-
-/* -------------------------------------------------------------------------*/
-
-static inline void write_cfgaddr(u32 addr)
-{
- __raw_writel((addr | PCI_ENABLE),
- (void __iomem *)(KSEG1ADDR(ADM5120_PCICFG_ADDR)));
-}
-
-static inline void write_cfgdata(u32 data)
-{
- __raw_writel(data, (void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
-}
-
-static inline u32 read_cfgdata(void)
-{
- return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
-}
-
-static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where)
-{
- return ((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \
- (where & 0xFC);
-}
-
-/* -------------------------------------------------------------------------*/
-
-static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *val)
-{
- unsigned long flags;
- u32 data;
-
- spin_lock_irqsave(&pci_lock, flags);
-
- write_cfgaddr(mkaddr(bus, devfn, where));
- data = read_cfgdata();
-
- DBG("PCI: cfg_read %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
- bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
- where, size, data);
-
- switch (size) {
- case 1:
- if (where & 1)
- data >>= 8;
- if (where & 2)
- data >>= 16;
- data &= 0xFF;
- break;
- case 2:
- if (where & 2)
- data >>= 16;
- data &= 0xFFFF;
- break;
- }
-
- *val = data;
- DBG(", 0x%08X returned\n", data);
-
- spin_unlock_irqrestore(&pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
-{
- unsigned long flags;
- u32 data;
- int s;
-
- spin_lock_irqsave(&pci_lock, flags);
-
- write_cfgaddr(mkaddr(bus, devfn, where));
- data = read_cfgdata();
-
- DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
- bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
- where, size, data);
-
- switch (size) {
- case 1:
- s = ((where & 3) << 3);
- data &= ~(0xFF << s);
- data |= ((val & 0xFF) << s);
- break;
- case 2:
- s = ((where & 2) << 4);
- data &= ~(0xFFFF << s);
- data |= ((val & 0xFFFF) << s);
- break;
- case 4:
- data = val;
- break;
- }
-
- write_cfgdata(data);
- DBG(", 0x%08X written\n", data);
-
- spin_unlock_irqrestore(&pci_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops adm5120_pci_ops = {
- .read = pci_config_read,
- .write = pci_config_write,
-};
-
-/* -------------------------------------------------------------------------*/
-
-static void adm5120_pci_fixup(struct pci_dev *dev)
-{
- if (dev->devfn != 0)
- return;
-
- /* setup COMMAND register */
- pci_write_config_word(dev, PCI_COMMAND,
- (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
-
- /* setup CACHE_LINE_SIZE register */
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
-
- /* setup BARS */
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120,
- adm5120_pci_fixup);
-
-/* -------------------------------------------------------------------------*/
-
-void __init adm5120_pci_set_irq_map(unsigned int nr_irqs,
- struct adm5120_pci_irq *map)
-{
- adm5120_pci_nr_irqs = nr_irqs;
- adm5120_pci_irq_map = map;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq = -1;
- int i;
-
- if ((!adm5120_pci_nr_irqs) || (!adm5120_pci_irq_map)) {
- printk(KERN_ALERT "PCI: pci_irq_map is not initialized\n");
- goto out;
- }
-
- if (slot < 1 || slot > 4) {
- printk(KERN_ALERT "PCI: slot number %u is not supported\n",
- slot);
- goto out;
- }
-
- for (i = 0; i < adm5120_pci_nr_irqs; i++) {
- if ((adm5120_pci_irq_map[i].slot == slot)
- && (adm5120_pci_irq_map[i].func == PCI_FUNC(dev->devfn))
- && (adm5120_pci_irq_map[i].pin == pin)) {
- irq = adm5120_pci_irq_map[i].irq;
- break;
- }
- }
-
- if (irq < 0) {
- printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n",
- pci_name((struct pci_dev *)dev), pin);
- } else {
- printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n",
- pci_name((struct pci_dev *)dev), pin, irq);
- }
-
-out:
- return irq;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
-
-/* -------------------------------------------------------------------------*/
-
-static struct resource pci_io_resource = {
- .name = "ADM5120 PCI I/O",
- .start = ADM5120_PCIIO_BASE,
- .end = ADM5120_PCICFG_ADDR-1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
- .name = "ADM5120 PCI MEM",
- .start = ADM5120_PCIMEM_BASE,
- .end = ADM5120_PCIIO_BASE-1,
- .flags = IORESOURCE_MEM
-};
-
-static struct pci_controller adm5120_controller = {
- .pci_ops = &adm5120_pci_ops,
- .io_resource = &pci_io_resource,
- .mem_resource = &pci_mem_resource,
-};
-
-static int __init adm5120_pci_setup(void)
-{
- if (adm5120_package_pqfp()) {
- printk(KERN_INFO "PCI: not available on ADM5120P\n");
- return -1;
- }
-
- /* Avoid ISA compat ranges. */
- PCIBIOS_MIN_IO = 0x00000000;
- PCIBIOS_MIN_MEM = 0x00000000;
-
- /* Set I/O resource limits. */
- ioport_resource.end = 0x1fffffff;
- iomem_resource.end = 0xffffffff;
-
- register_pci_controller(&adm5120_controller);
- return 0;
-}
-
-arch_initcall(adm5120_pci_setup);