aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx/image/Makefile
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/apm821xx/image/Makefile')
-rw-r--r--target/linux/apm821xx/image/Makefile165
1 files changed, 82 insertions, 83 deletions
diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile
index 4dec5fdf3c..1925a00d6e 100644
--- a/target/linux/apm821xx/image/Makefile
+++ b/target/linux/apm821xx/image/Makefile
@@ -7,37 +7,49 @@ include $(INCLUDE_DIR)/image.mk
DEVICE_VARS += IMAGE_SIZE DTB_SIZE
-define Device/Default
- PROFILES := Default
- KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
- DEVICE_DTS :=
- KERNEL_ENTRY := 0x00000000
- KERNEL_LOADADDR := 0x00000000
- DEVICE_DTS_DIR := ../dts
- SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
+define Build/boot-img
+ $(RM) -rf $@.bootdir
+ mkdir -p $@.bootdir/boot
+
+ $(CP) $@.scr $@.bootdir/boot/boot.scr
+ $(CP) $(IMAGE_KERNEL).dtb $@.bootdir/boot/$(DEVICE_DTB)
+ $(CP) $(IMAGE_KERNEL) $@.bootdir/boot/uImage
+
+ genext2fs --block-size $(BLOCKSIZE:%k=%Ki) --size-in-blocks $$((1024 * $(BOOT_SIZE))) --root $@.bootdir $@.boot
+
+ # convert it to revision 1 - needed for u-boot ext2load
+ $(STAGING_DIR_HOST)/bin/tune2fs -O filetype $@.boot
+ $(STAGING_DIR_HOST)/bin/e2fsck -pDf $@.boot > /dev/null
endef
-define Build/dtb
- $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE))
+define Build/boot-script
+ $(STAGING_DIR_HOST)/bin/mkimage -A powerpc -T script -C none -n "$(PROFILE) Boot Script" \
+ -d mbl_boot.scr \
+ $@.scr
endef
-define Build/prepend-dtb
- cat "$@.dtb.uimage" "$@" > "$@.new"
- mv "$@.new" "$@"
+define Build/copy-file
+ cat "$(1)" > "$@"
endef
-define Build/export-dtb
- cp $(IMAGE_KERNEL).dtb $@
+define Build/create-uImage-dtb
+ # flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
+ -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
+ -O linux -T kernel -C none \
+ -n '$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
+ -d "$@.dtb" "$@.dtb.uimage"
endef
-ifeq ($(SUBTARGET),nand)
+define Build/dtb
+ $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE))
+endef
-define Image/cpiogz
- ( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9n >$(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz )
+define Build/export-dtb
+ cp $(IMAGE_KERNEL).dtb $@
endef
-define Build/copy-file
- cat "$(1)" > "$@"
+define Build/hdd-img
+ ./mbl_gen_hdd_img.sh $@ $@.boot $(IMAGE_ROOTFS) $(BOOT_SIZE) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
endef
define Build/MerakiAdd-dtb
@@ -72,6 +84,56 @@ define Build/MerakiNAND
@cp $@.new $@
endef
+define Build/MuImage-initramfs
+ rm -rf $@.fakerd $@.new
+
+ dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
+
+ # Netgear used an old uboot that doesn't have FIT support.
+ # So we are stuck with either a full ext2/4 fs in a initrd.
+ # ... or we try to make the "multi" image approach to work
+ # for us.
+ #
+ # Sadly, the "multi" image has to consists of three
+ # "fixed" parts in the following "fixed" order:
+ # 1. The kernel which is in $@
+ # 2. The (fake) initrd which is in $@.fakerd
+ # 3. The device tree binary which is in $@.dtb
+ #
+ # Now, given that we use the function for the kernel which
+ # already has a initramfs image inside, we still have to
+ # add a "fake" initrd (which a mkimage header) in the second
+ # part of the legacy multi image. Since we need to put the
+ # device tree stuff into part 3.
+
+ -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi \
+ -C $(1) -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) \
+ -n '$(BOARD_NAME) initramfs' -d $@:$@.fakerd:$@.dtb $@.new
+ mv $@.new $@
+ rm -rf $@.fakerd
+endef
+
+define Build/prepend-dtb
+ cat "$@.dtb.uimage" "$@" > "$@.new"
+ mv "$@.new" "$@"
+endef
+
+define Image/cpiogz
+ ( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9n >$(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz )
+endef
+
+define Device/Default
+ PROFILES := Default
+ KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
+ DEVICE_DTS :=
+ KERNEL_ENTRY := 0x00000000
+ KERNEL_LOADADDR := 0x00000000
+ DEVICE_DTS_DIR := ../dts
+ SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
+endef
+
+ifeq ($(SUBTARGET),nand)
+
define Device/meraki_mr24
DEVICE_TITLE := Cisco Meraki MR24
DEVICE_PACKAGES := kmod-spi-gpio -swconfig
@@ -115,43 +177,6 @@ define Device/meraki_mx60
endef
TARGET_DEVICES += meraki_mx60
-define Build/create-uImage-dtb
- # flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
- -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
- -O linux -T kernel -C none \
- -n '$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
- -d "$@.dtb" "$@.dtb.uimage"
-endef
-
-define Build/MuImage-initramfs
- rm -rf $@.fakerd $@.new
-
- dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
-
- # Netgear used an old uboot that doesn't have FIT support.
- # So we are stuck with either a full ext2/4 fs in a initrd.
- # ... or we try to make the "multi" image approach to work
- # for us.
- #
- # Sadly, the "multi" image has to consists of three
- # "fixed" parts in the following "fixed" order:
- # 1. The kernel which is in $@
- # 2. The (fake) initrd which is in $@.fakerd
- # 3. The device tree binary which is in $@.dtb
- #
- # Now, given that we use the function for the kernel which
- # already has a initramfs image inside, we still have to
- # add a "fake" initrd (which a mkimage header) in the second
- # part of the legacy multi image. Since we need to put the
- # device tree stuff into part 3.
-
- -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi \
- -C $(1) -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) \
- -n '$(BOARD_NAME) initramfs' -d $@:$@.fakerd:$@.dtb $@.new
- mv $@.new $@
- rm -rf $@.fakerd
-endef
-
define Device/netgear_wndap6x0
DEVICE_PACKAGES := kmod-eeprom-at24
SUBPAGESIZE := 256
@@ -217,32 +242,6 @@ endif
ifeq ($(SUBTARGET),sata)
-### Image scripts for the WD My Book Live Series ###
-define Build/boot-script
- $(STAGING_DIR_HOST)/bin/mkimage -A powerpc -T script -C none -n "$(PROFILE) Boot Script" \
- -d mbl_boot.scr \
- $@.scr
-endef
-
-define Build/boot-img
- $(RM) -rf $@.bootdir
- mkdir -p $@.bootdir/boot
-
- $(CP) $@.scr $@.bootdir/boot/boot.scr
- $(CP) $(IMAGE_KERNEL).dtb $@.bootdir/boot/$(DEVICE_DTB)
- $(CP) $(IMAGE_KERNEL) $@.bootdir/boot/uImage
-
- genext2fs --block-size $(BLOCKSIZE:%k=%Ki) --size-in-blocks $$((1024 * $(BOOT_SIZE))) --root $@.bootdir $@.boot
-
- # convert it to revision 1 - needed for u-boot ext2load
- $(STAGING_DIR_HOST)/bin/tune2fs -O filetype $@.boot
- $(STAGING_DIR_HOST)/bin/e2fsck -pDf $@.boot > /dev/null
-endef
-
-define Build/hdd-img
- ./mbl_gen_hdd_img.sh $@ $@.boot $(IMAGE_ROOTFS) $(BOOT_SIZE) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
-endef
-
define Device/wd_mybooklive
DEVICE_TITLE := Western Digital My Book Live Series (Single + Duo)
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-fs-vfat wpad-basic