diff options
Diffstat (limited to 'target/linux/ath79/base-files/etc/hotplug.d/firmware')
-rw-r--r-- | target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 161 | ||||
-rw-r--r-- | target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 167 |
2 files changed, 0 insertions, 328 deletions
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom deleted file mode 100644 index 14cfe64a41..0000000000 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ /dev/null @@ -1,161 +0,0 @@ -#!/bin/sh - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/caldata.sh - -board=$(board_name) - -case "$FIRMWARE" in -"ath9k-eeprom-ahb-18100000.wmac.bin") - case $board in - avm,fritz4020) - caldata_extract_reverse "urlader" 0x1541 0x440 - ;; - dlink,dir-825-c1|\ - dlink,dir-835-a1) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_text "mac" 0x4) - ;; - dlink,dir-842-c1|\ - dlink,dir-842-c2|\ - dlink,dir-842-c3|\ - dlink,dir-859-a1|\ - nec,wg1200cr|\ - wd,mynet-n750) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac") - ;; - engenius,ecb1750) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) - ;; - engenius,epg5000|\ - iodata,wn-ac1167dgr|\ - iodata,wn-ac1600dgr|\ - iodata,wn-ac1600dgr2|\ - iodata,wn-ag300dgr|\ - sitecom,wlr-7100) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr) - ;; - nec,wg800hp) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_text board_data 0x680) - ;; - qihoo,c301) - caldata_extract "radiocfg" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac") - ;; - zyxel,nbg6716) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr) - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -"ath9k-eeprom-pci-0000:00:00.0.bin") - case $board in - avm,fritz300e) - caldata_extract_reverse "urloader" 0x1541 0x440 - ;; - buffalo,whr-g301n|\ - buffalo,wzr-hp-g302h-a1a0|\ - tplink,tl-wr841-v5|\ - tplink,tl-wr941-v4) - caldata_extract "art" 0x1000 0xeb8 - ;; - buffalo,wzr-hp-g450h) - caldata_extract "art" 0x1000 0x440 - ;; - dlink,dir-825-c1|\ - dlink,dir-835-a1) - caldata_extract "art" 0x5000 0x440 - ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) - ;; - ocedo,raccoon|\ - tplink,tl-wdr3500-v1|\ - tplink,tl-wdr3600-v1|\ - tplink,tl-wdr4300-v1|\ - tplink,tl-wdr4900-v2|\ - winchannel,wb2000) - caldata_extract "art" 0x5000 0x440 - ;; - netgear,wnr1000-v2|\ - netgear,wnr2000-v3|\ - netgear,wnr612-v2|\ - on,n150r|\ - pcs,cap324|\ - tplink,tl-mr3220-v1|\ - tplink,tl-mr3420-v1|\ - tplink,tl-wr2543-v1|\ - tplink,tl-wr740n-v1|\ - tplink,tl-wr740n-v3|\ - tplink,tl-wr741-v1|\ - tplink,tl-wr743nd-v1|\ - tplink,tl-wr841-v7|\ - tplink,tl-wr842n-v1|\ - ubnt,airrouter|\ - ubnt,bullet-m|\ - ubnt,nano-m|\ - ubnt,rocket-m) - caldata_extract "art" 0x1000 0x1000 - ;; - pqi,air-pen) - caldata_extract "art" 0x1000 0x7d2 - ;; - ubnt,unifi) - caldata_extract "art" 0x1000 0x800 - ;; - wd,mynet-n750) - caldata_extract "art" 0x5000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") - ;; - wd,mynet-wifi-rangeextender) - caldata_extract "art" 0x1000 0x1000 - ath9k_patch_mac $(nvram get wl0_hwaddr) - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -"ath9k-eeprom-pci-0000:00:11.0.bin") - case $board in - buffalo,wzr-hp-ag300h|\ - netgear,wndr3700|\ - netgear,wndr3700v2|\ - netgear,wndr3800|\ - netgear,wndr3800ch) - caldata_extract "art" 0x1000 0xeb8 - ;; - dlink,dir-825-b1) - caldata_extract "caldata" 0x1000 0xeb8 - ath9k_patch_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -"ath9k-eeprom-pci-0000:00:12.0.bin") - case $board in - buffalo,wzr-hp-ag300h|\ - netgear,wndr3700|\ - netgear,wndr3700v2|\ - netgear,wndr3800|\ - netgear,wndr3800ch) - caldata_extract "art" 0x5000 0xeb8 - ;; - dlink,dir-825-b1) - caldata_extract "caldata" 0x5000 0xeb8 - ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -esac diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata deleted file mode 100644 index 91e813f121..0000000000 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ /dev/null @@ -1,167 +0,0 @@ -#!/bin/sh - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/caldata.sh -. /lib/functions/k2t.sh - -board=$(board_name) - -case "$FIRMWARE" in -"ath10k/cal-pci-0000:00:00.0.bin") - case $board in - comfast,cf-wr650ac-v1|\ - comfast,cf-wr650ac-v2|\ - yuncore,a770) - caldata_extract "art" 0x5000 0x844 - ;; - devolo,dvl1200e|\ - devolo,dvl1200i|\ - devolo,dvl1750c|\ - devolo,dvl1750e|\ - devolo,dvl1750i|\ - devolo,dvl1750x) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1) - ;; - dlink,dir-859-a1) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") - ;; - elecom,wrc-1750ghbk2-i) - caldata_extract "art" 0x5000 0x844 - ;; - engenius,ecb1750) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr) - ;; - engenius,epg5000|\ - iodata,wn-ac1167dgr|\ - iodata,wn-ac1600dgr2|\ - sitecom,wlr-7100) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) - ;; - engenius,ews511ap) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) - ;; - glinet,gl-ar750|\ - glinet,gl-ar750s) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) - ;; - glinet,gl-x750) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) - ;; - nec,wg800hp) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(mtd_get_mac_text board_data 0x880) - ;; - ocedo,koala|\ - ocedo,ursus) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(mtd_get_mac_binary art 0xc) - ;; - openmesh,om5p-ac-v2) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) - ;; - qihoo,c301) - caldata_extract "radiocfg" 0x5000 0x844 - ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac) - ;; - tplink,archer-a7-v5|\ - tplink,archer-c2-v3|\ - tplink,archer-c7-v4|\ - tplink,archer-c7-v5|\ - tplink,archer-c25-v1) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) - ;; - tplink,archer-c5-v1|\ - tplink,archer-c7-v2) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1) - ;; - tplink,archer-d50-v1) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2) - ;; - tplink,re350k-v1) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2) - ;; - tplink,re355-v1|\ - tplink,re450-v1) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) - ;; - tplink,re450-v2) - caldata_extract "art" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) - ;; - ubnt,unifiac-lite|\ - ubnt,unifiac-lr|\ - ubnt,unifiac-mesh|\ - ubnt,unifiac-mesh-pro|\ - ubnt,lap-120|\ - ubnt,nanobeam-ac|\ - ubnt,nanostation-ac|\ - ubnt,nanostation-ac-loco|\ - ubnt,unifiac-pro) - caldata_extract "EEPROM" 0x5000 0x844 - ;; - zyxel,nbg6716) - caldata_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) - ;; - esac - ;; -"ath10k/pre-cal-pci-0000:00:00.0.bin") - case $board in - comfast,cf-e313ac) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(mtd_get_mac_binary art 0x6) - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin - ;; - dlink,dir-842-c1|\ - dlink,dir-842-c2|\ - dlink,dir-842-c3|\ - nec,wg1200cr) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac) - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ;; - netgear,ex6400|\ - netgear,ex7300) - caldata_extract "caldata" 0x5000 0x2f20 - ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc) - ;; - phicomm,k2t) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(k2t_get_mac "5g_mac") - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ;; - tplink,archer-c58-v1|\ - tplink,archer-c59-v1|\ - tplink,archer-c59-v2|\ - tplink,archer-c60-v1|\ - tplink,archer-c60-v2|\ - tplink,archer-c6-v2) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1) - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ;; - esac - ;; -*) - exit 1 - ;; -esac |