aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts/qca9563_zte_mf281.dts
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ath79/dts/qca9563_zte_mf281.dts')
-rw-r--r--target/linux/ath79/dts/qca9563_zte_mf281.dts299
1 files changed, 96 insertions, 203 deletions
diff --git a/target/linux/ath79/dts/qca9563_zte_mf281.dts b/target/linux/ath79/dts/qca9563_zte_mf281.dts
index 2f4b7316bf..9205061e24 100644
--- a/target/linux/ath79/dts/qca9563_zte_mf281.dts
+++ b/target/linux/ath79/dts/qca9563_zte_mf281.dts
@@ -3,246 +3,157 @@
// Copyright (c) 2021, 2022 Lech Perczak
// Copyright (c) 2022 David Bauer <mail@david-bauer.net>
-#include "qca956x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
+#include "qca9563_zte_mf28x.dtsi"
/ {
model = "ZTE MF281";
compatible = "zte,mf281", "qca,qca9563";
- aliases {
- led-boot = &led_debug;
- led-failsafe = &led_debug;
- led-running = &led_debug;
- led-upgrade = &led_debug;
- label-mac-device = &eth0;
- };
-
leds {
- compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&enable_wlan_led_gpio>;
-
- /* Hidden SMD LED below signal strength LEDs.
- * Visible through slits underside of the case.
- */
- led_debug: debug {
- label = "green:debug";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
};
+};
- keys {
- compatible = "gpio-keys";
+&led_debug {
+ label = "green:debug";
+ color = <LED_COLOR_ID_GREEN>;
+};
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
+&boot_flash {
+ partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0xa0000>;
+ read-only;
};
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
+ partition@80000 {
+ label = "u-boot-env";
+ reg = <0xa0000 0x20000>;
+ read-only;
};
};
-
- /* This GPIO is used to reset whole board _including_ the modem */
- gpio-restart {
- compatible = "gpio-restart";
- gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
- active-delay = <3000>;
- inactive-delay = <1000>;
- };
};
-&spi {
- status = "okay";
+&system_flash {
+ partitions {
+ partition@0 {
+ label = "fota-flag";
+ reg = <0x000000 0xa0000>;
+ read-only;
+ };
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
+ partition@a0000 {
+ label = "art";
+ reg = <0xa0000 0x80000>;
+ read-only;
- partitions {
- compatible = "fixed-partitions";
+ compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0xa0000>;
- read-only;
+ cal_caldata_1000: cal@1000 {
+ reg = <0x1000 0x440>;
};
- partition@80000 {
- label = "u-boot-env";
- reg = <0xa0000 0x20000>;
- read-only;
+ cal_caldata_5000: cal@5000 {
+ reg = <0x5000 0x2f20>;
};
};
- };
- flash@1 {
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <25000000>;
+ partition@120000 {
+ label = "mac";
+ reg = <0x120000 0x80000>;
+ read-only;
- partitions {
- compatible = "fixed-partitions";
+ compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
- label = "fota-flag";
- reg = <0x000000 0xa0000>;
- read-only;
- };
-
- partition@a0000 {
- label = "art";
- reg = <0xa0000 0x80000>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cal_caldata_1000: cal@1000 {
- reg = <0x1000 0x440>;
- };
-
- cal_caldata_5000: cal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
-
- partition@120000 {
- label = "mac";
- reg = <0x120000 0x80000>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_mac_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
- };
-
- partition@1a0000 {
- label = "reserved2";
- reg = <0x1a0000 0xc0000>;
- read-only;
- };
-
- partition@260000 {
- label = "cfg-param";
- reg = <0x260000 0x400000>;
- read-only;
+ macaddr_mac_0: macaddr@0 {
+ reg = <0x0 0x6>;
};
+ };
- partition@660000 {
- label = "log";
- reg = <0x660000 0x400000>;
- read-only;
- };
+ partition@1a0000 {
+ label = "reserved2";
+ reg = <0x1a0000 0xc0000>;
+ read-only;
+ };
- partition@a60000 {
- label = "oops";
- reg = <0xa60000 0xa0000>;
- read-only;
- };
+ partition@260000 {
+ label = "cfg-param";
+ reg = <0x260000 0x400000>;
+ read-only;
+ };
- partition@b00000 {
- label = "reserved3";
- reg = <0xb00000 0x500000>;
- read-only;
- };
+ partition@660000 {
+ label = "log";
+ reg = <0x660000 0x400000>;
+ read-only;
+ };
- partition@1000000 {
- label = "web";
- reg = <0x1000000 0x800000>;
- read-only;
- };
+ partition@a60000 {
+ label = "oops";
+ reg = <0xa60000 0xa0000>;
+ read-only;
+ };
- partition@1800000 {
- label = "firmware";
- reg = <0x1800000 0x1d00000>;
+ partition@b00000 {
+ label = "reserved3";
+ reg = <0xb00000 0x500000>;
+ read-only;
+ };
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
+ partition@1000000 {
+ label = "web";
+ reg = <0x1000000 0x800000>;
+ read-only;
+ };
- partition@0 {
- label = "kernel";
- reg = <0x0 0x600000>;
- };
+ partition@1800000 {
+ label = "firmware";
+ reg = <0x1800000 0x1d00000>;
- partition@600000 {
- label = "ubi";
- reg = <0x600000 0x1700000>;
- };
- };
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@3500000 {
- label = "data";
- reg = <0x3500000 0x1900000>;
- read-only;
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x600000>;
};
- partition@4e00000 {
- label = "fota";
- reg = <0x4e00000 0x3200000>;
- read-only;
+ partition@600000 {
+ label = "ubi";
+ reg = <0x600000 0x1700000>;
};
};
- };
-};
-&mdio0 {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "sgmii";
+ partition@3500000 {
+ label = "data";
+ reg = <0x3500000 0x1900000>;
+ read-only;
+ };
- qca,ar8327-initvals = <
- 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
- 0x7c 0x0000007e /* PORT0_STATUS */
- >;
+ partition@4e00000 {
+ label = "fota";
+ reg = <0x4e00000 0x3200000>;
+ read-only;
+ };
};
};
&eth0 {
- status = "okay";
-
- phy-mode = "sgmii";
- phy-handle = <&phy0>;
-
nvmem-cells = <&macaddr_mac_0>;
nvmem-cell-names = "mac-address";
};
-&pcie {
- status = "okay";
-
- wifi@0,0 {
- compatible = "qcom,ath10k";
- reg = <0x0 0 0 0 0>;
-
- nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_5000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- mac-address-increment = <1>;
- };
+&wifi_ath10k {
+ nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <1>;
};
&pinmux {
@@ -252,24 +163,6 @@
};
&wmac {
- status = "okay";
-
nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_1000>;
nvmem-cell-names = "mac-address", "calibration";
};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-26 11:13:18 +0000