aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r--target/linux/ath79/dts/ar9132.dtsi21
-rw-r--r--target/linux/ath79/dts/ar9132_tl-wr1043nd-v1.dts (renamed from target/linux/ath79/dts/ar9132_tl_wr1043nd_v1.dts)82
2 files changed, 91 insertions, 12 deletions
diff --git a/target/linux/ath79/dts/ar9132.dtsi b/target/linux/ath79/dts/ar9132.dtsi
index 4cc4f04a2e..f1822e8775 100644
--- a/target/linux/ath79/dts/ar9132.dtsi
+++ b/target/linux/ath79/dts/ar9132.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/ath79-clk.h>
+#include "ath79.dtsi"
/ {
compatible = "qca,ar9132";
@@ -160,6 +161,15 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ wmac: gmac@180c0000 {
+ compatible = "qca,ar9130-wmac";
+ reg = <0x180c0000 0x230000>;
+
+ interrupts = <2>;
+
+ status = "disabled";
+ };
};
usb_phy: usb-phy {
@@ -173,3 +183,14 @@
status = "disabled";
};
};
+
+&eth0 {
+ compatible = "qca,ar9130-eth", "syscon";
+ reg = <0x19000000 0x200
+ 0x18070000 0x4>;
+ pll-data = <0x1a000000 0x13000a44 0x00441099>;
+ pll-reg = <0x4 0x10 17>;
+ pll-handle = <&pll>;
+ resets = <&rst 8>, <&rst 9>;
+ reset-names = "phy", "mac";
+};
diff --git a/target/linux/ath79/dts/ar9132_tl_wr1043nd_v1.dts b/target/linux/ath79/dts/ar9132_tl-wr1043nd-v1.dts
index c3efe6631a..97ad5ac203 100644
--- a/target/linux/ath79/dts/ar9132_tl_wr1043nd_v1.dts
+++ b/target/linux/ath79/dts/ar9132_tl-wr1043nd-v1.dts
@@ -10,6 +10,10 @@
compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
model = "TP-Link TL-WR1043ND Version 1";
+ aliases {
+ led-status = &system;
+ };
+
memory@0 {
device_type = "memory";
reg = <0x0 0x2000000>;
@@ -22,19 +26,18 @@
};
keys {
- compatible = "gpio-keys-polled";
+ compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- poll-interval = <20>;
- button@0 {
+ button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
- button@1 {
+ button1 {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
@@ -44,27 +47,50 @@
leds {
compatible = "gpio-leds";
- led@0 {
+ usb {
label = "tp-link:green:usb";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
};
- led@1 {
+ system: system {
label = "tp-link:green:system";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
- led@2 {
+ qss {
label = "tp-link:green:qss";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
- led@3 {
+ wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
};
};
+
+ rtl8366rb {
+ compatible = "realtek,rtl8366rb";
+ gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
+
+ resets = <&rst 8>;
+ reset-names = "switch";
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+
};
&uart {
@@ -77,6 +103,16 @@
&usb {
status = "okay";
+
+ port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
};
&usb_phy {
@@ -90,7 +126,7 @@
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "s25sl064a";
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
@@ -99,18 +135,18 @@
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
+ uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
- partition@1 {
+ partition@020000 {
label = "firmware";
reg = <0x020000 0x7D0000>;
};
- partition@2 {
+ art: partition@7F0000 {
label = "art";
reg = <0x7F0000 0x010000>;
read-only;
@@ -118,3 +154,25 @@
};
};
};
+
+&eth0 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ mtd-mac-address = <&uboot 0x1fc00>;
+
+ resets = <&rst 9>;
+ reset-names = "mac";
+
+ phy-handle = <&phy0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};