diff options
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r-- | target/linux/ath79/dts/ar9331_tl-wr740nd-v4.dts | 9 | ||||
-rw-r--r-- | target/linux/ath79/dts/ar9331_tl-wr741nd-v4.dts | 9 | ||||
-rw-r--r-- | target/linux/ath79/dts/ar9331_tl-wr741nd-v4.dtsi | 173 |
3 files changed, 191 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9331_tl-wr740nd-v4.dts b/target/linux/ath79/dts/ar9331_tl-wr740nd-v4.dts new file mode 100644 index 0000000000..b0029b88b6 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tl-wr740nd-v4.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9331_tl-wr741nd-v4.dtsi" + +/ { + model = "TP-Link TL-WR740N/ND v4"; + compatible = "tplink,tl-wr740n-v4"; +}; diff --git a/target/linux/ath79/dts/ar9331_tl-wr741nd-v4.dts b/target/linux/ath79/dts/ar9331_tl-wr741nd-v4.dts new file mode 100644 index 0000000000..118831b4d2 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tl-wr741nd-v4.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9331_tl-wr741nd-v4.dtsi" + +/ { + model = "TP-Link TL-WR741N/ND v4"; + compatible = "tplink,tl-wr741n-v4"; +}; diff --git a/target/linux/ath79/dts/ar9331_tl-wr741nd-v4.dtsi b/target/linux/ath79/dts/ar9331_tl-wr741nd-v4.dtsi new file mode 100644 index 0000000000..615d317e41 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_tl-wr741nd-v4.dtsi @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9331.dtsi" + +/ { + compatible = "tplink,tl-wr741n-v4", "qca,ar9331"; + model = "TP-Link TL-WR741N/ND v4"; + + aliases { + serial0 = &uart; + led-status = &led_system; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&switch_led_pins>; + + lan1 { + label = "tp-link:green:lan1"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + lan2 { + label = "tp-link:green:lan2"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + + lan3 { + label = "tp-link:green:lan3"; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + }; + + lan4 { + label = "tp-link:green:lan4"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + qss { + label = "tp-link:green:qss"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + + led_system: system { + label = "tp-link:green:system"; + gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "tp-link:green:wan"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + wlan { + label = "tp-link:green:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + firmware: partition@20000 { + reg = <0x20000 0x3d0000>; + label = "firmware"; + }; + + art: partition@3f0000 { + reg = <0x3f0000 0x10000>; + label = "art"; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "mii"; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&phy4>; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <1>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <1>; + switch-phy-swap = <1>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <(-1)>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gpio { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; |