diff options
Diffstat (limited to 'target/linux/ath79/dts')
| -rw-r--r-- | target/linux/ath79/dts/qca9556_avm_fritz-repeater.dtsi | 93 | ||||
| -rw-r--r-- | target/linux/ath79/dts/qca9556_avm_fritz1750e.dts | 89 | ||||
| -rw-r--r-- | target/linux/ath79/dts/qca9556_avm_fritz450e.dts | 76 |
3 files changed, 172 insertions, 86 deletions
diff --git a/target/linux/ath79/dts/qca9556_avm_fritz-repeater.dtsi b/target/linux/ath79/dts/qca9556_avm_fritz-repeater.dtsi new file mode 100644 index 0000000000..b1f5f1bdb3 --- /dev/null +++ b/target/linux/ath79/dts/qca9556_avm_fritz-repeater.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca9557.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "urlader"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + compatible = "avm,eva-firmware"; + label = "firmware"; + reg = <0x20000 0xee0000>; + }; + + partition@f00000 { + label = "tffs (1)"; + reg = <0xf00000 0x80000>; + read-only; + }; + + partition@f80000 { + label = "tffs (2)"; + reg = <0xf80000 0x80000>; + read-only; + }; + }; + }; +}; + +&wmac { + status = "okay"; + qca,no-eeprom; +}; + +ð1 { + status = "okay"; + + phy-handle = <&phy0>; + pll-data = <0x3000000 0x101 0x1313>; + + gmac-config { + device = <&gmac>; + ge0-sgmii = <0>; + }; +}; + +&mdio1 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; diff --git a/target/linux/ath79/dts/qca9556_avm_fritz1750e.dts b/target/linux/ath79/dts/qca9556_avm_fritz1750e.dts index f50af5b228..25d3ae8da4 100644 --- a/target/linux/ath79/dts/qca9556_avm_fritz1750e.dts +++ b/target/linux/ath79/dts/qca9556_avm_fritz1750e.dts @@ -1,19 +1,13 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "qca9557.dtsi" +#include "qca9556_avm_fritz-repeater.dtsi" / { compatible = "avm,fritz1750e", "qca,qca9557"; model = "AVM FRITZ!WLAN Repeater 1750E"; - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - aliases { led-boot = &led_power; led-failsafe = &led_power; @@ -91,65 +85,14 @@ gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>; }; }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; - }; - }; }; &pcie0 { status = "okay"; }; -&uart { - status = "okay"; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "urlader"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - compatible = "avm,eva-firmware"; - label = "firmware"; - reg = <0x20000 0xee0000>; - }; - - partition@f00000 { - label = "tffs (1)"; - reg = <0xf00000 0x80000>; - read-only; - }; - - partition@f80000 { - label = "tffs (2)"; - reg = <0xf80000 0x80000>; - read-only; - }; - }; - }; +&phy0 { + reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; &gpio { @@ -167,29 +110,3 @@ line-name = "PCIE Bus reset"; }; }; - -&wmac { - status = "okay"; - qca,no-eeprom; -}; - -ð1 { - status = "okay"; - - phy-handle = <&phy0>; - pll-data = <0x3000000 0x101 0x1313>; - - gmac-config { - device = <&gmac>; - ge0-sgmii = <0>; - }; -}; - -&mdio1 { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; -}; diff --git a/target/linux/ath79/dts/qca9556_avm_fritz450e.dts b/target/linux/ath79/dts/qca9556_avm_fritz450e.dts new file mode 100644 index 0000000000..60685bd3f1 --- /dev/null +++ b/target/linux/ath79/dts/qca9556_avm_fritz450e.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> + +#include "qca9556_avm_fritz-repeater.dtsi" + +/ { + compatible = "avm,fritz450e", "qca,qca9557"; + model = "AVM FRITZ!WLAN Repeater 450E"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "fritz450e:green:power"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + wlan { + label = "fritz450e:green:wlan"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + lan { + label = "fritz450e:green:lan"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + rssi2 { + label = "fritz450e:green:rssi2"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + rssi3 { + label = "fritz450e:green:rssi3"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + rssi4 { + label = "fritz450e:green:rssi4"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + /* + * Wondered why rssi0 and rssi1 are missing? + * + * AVM seems to have run low on usable GPIO pins, so + * instead of adding a shift register like they did for + * the 1750E they figured out "Why not use the LEDs on + * the AR8033?". + * + * EVA configures the PHY in a way it does not display + * the link-state using it's LEDs. When we reset the PHY + * using the reset-mechanism of the PHY subsystem, this + * setting is cleared. + * + * We avoid this by keeping the reset line high. + */ + phy-reset { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "phy-reset"; + }; +}; |