diff options
Diffstat (limited to 'target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch')
| -rw-r--r-- | target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch | 121 |
1 files changed, 0 insertions, 121 deletions
diff --git a/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch b/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch deleted file mode 100644 index 5cd522cacb..0000000000 --- a/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch +++ /dev/null @@ -1,121 +0,0 @@ -From: Christopher Hill <ch6574@gmail.com> -Subject: [PATCH] ath79: add Mikrotik rb4xx series drivers - -This adds 3 Mikrotik rb4xx series drivers as follows: - -rb4xx-cpld: This is in the mfd subsystem, and is the parent CPLD device -that interfaces between the SoC SPI bus and its two children below. -rb4xx-gpio: This is the GPIO expander. -rb4xx-nand: This is the NAND driver. - -The history of this code comes in three phases. - -1. The first is a May 2015 attempt to push the equivalient ar71xx rb4xx -drivers upstream. See https://lore.kernel.org/patchwork/patch/940880/. - -Module-author: Gabor Juhos <juhosg@openwrt.org> -Module-author: Imre Kaloz <kaloz@openwrt.org> -Module-author: Bert Vermeulen <bert@biot.com> - -2. Next several ar71xx patches were applied bringing the code current. - -commit 7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c -Submitted-by: Hauke Mehrtens <hauke@hauke-m.de> - -commit af79fdbe4af32a287798b579141204bda056b8aa -commit 889272d92db689fd9c910243635e44c9d8323095 -commit e21cb649a235180563363b8af5ba8296b9ac0baa -commit 7c09fa4a7492ca436f2c94bd9a465b7c5bbeed6f -Submitted-by: Felix Fietkau <nbd@nbd.name> - -3. Finally a heavy refactor to split the driver into the three new -subsystems, and updated to work with the device tree configuration, plus -updates and review feedback incorporated - -Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org> -Submitted-by: Christopher Hill <ch6574@gmail.com> ---- - drivers/mfd/Kconfig | 8 ++++++++ - drivers/mfd/Makefile | 1 + - drivers/gpio/Kconfig | 6 ++++++ - drivers/gpio/Makefile | 1 + - drivers/mtd/nand/raw/Kconfig | 7 +++++++ - drivers/mtd/nand/raw/Makefile | 1 + - 6 files changed, 24 insertions(+) - ---- a/drivers/mfd/Kconfig -+++ b/drivers/mfd/Kconfig -@@ -2142,6 +2142,14 @@ config RAVE_SP_CORE - Select this to get support for the Supervisory Processor - device found on several devices in RAVE line of hardware. - -+config MFD_RB4XX_CPLD -+ tristate "CPLD driver for Mikrotik RB4xx series boards" -+ select MFD_CORE -+ depends on ATH79 || COMPILE_TEST -+ help -+ Enables support for the CPLD chip (NAND & GPIO) on Mikrotik -+ Routerboard RB4xx series. -+ - config SGI_MFD_IOC3 - tristate "SGI IOC3 core driver" - depends on PCI && MIPS && 64BIT ---- a/drivers/mfd/Makefile -+++ b/drivers/mfd/Makefile -@@ -264,6 +264,7 @@ obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-b - obj-$(CONFIG_MFD_STMFX) += stmfx.o - obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o - -+obj-$(CONFIG_MFD_RB4XX_CPLD) += rb4xx-cpld.o - obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o - obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o - obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -1520,6 +1520,12 @@ config GPIO_SODAVILLE - help - Say Y here to support Intel Sodaville GPIO. - -+config GPIO_RB4XX -+ tristate "GPIO expander for Mikrotik RB4xx series boards" -+ depends on MFD_RB4XX_CPLD -+ help -+ GPIO driver for Mikrotik Routerboard RB4xx series. -+ - endmenu - - menu "SPI GPIO expanders" ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -121,6 +121,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061. - obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o - obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o - obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o -+obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o - obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o - obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o - obj-$(CONFIG_GPIO_RDA) += gpio-rda.o ---- a/drivers/mtd/nand/raw/Kconfig -+++ b/drivers/mtd/nand/raw/Kconfig -@@ -564,4 +564,11 @@ config MTD_NAND_AR934X - Enables support for NAND controller on Qualcomm Atheros SoCs. - This controller is found on AR934x and QCA955x SoCs. - -+config MTD_NAND_RB4XX -+ tristate "Support for NAND driver for Mikrotik RB4xx series boards" -+ depends on MFD_RB4XX_CPLD -+ help -+ Enables support for the NAND flash chip on Mikrotik Routerboard -+ RB4xx series. -+ - endif # MTD_RAW_NAND ---- a/drivers/mtd/nand/raw/Makefile -+++ b/drivers/mtd/nand/raw/Makefile -@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_MESON) += meson_n - obj-$(CONFIG_MTD_NAND_CADENCE) += cadence-nand-controller.o - obj-$(CONFIG_MTD_NAND_ARASAN) += arasan-nand-controller.o - obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o -+obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o - - nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o - nand-objs += nand_onfi.o |