1 files changed, 0 insertions, 132 deletions
diff --git a/target/linux/bcm27xx/patches-4.19/950-0811-overlays-Add-ssd1306-spi-overlay-3440.patch b/target/linux/bcm27xx/patches-4.19/950-0811-overlays-Add-ssd1306-spi-overlay-3440.patch
deleted file mode 100644
index e27893d9ac..0000000000
--- a/target/linux/bcm27xx/patches-4.19/950-0811-overlays-Add-ssd1306-spi-overlay-3440.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From db048a80e63c66607b3bd73fa641802ec83bf166 Mon Sep 17 00:00:00 2001
-From: MikeDK <m.kaplan@evva.com>
-Date: Fri, 31 Jan 2020 10:57:21 +0100
-Subject: [PATCH] overlays: Add ssd1306-spi overlay (#3440)
-
-Add an overlay for SSD1306 based OLED boards using SPI.
-This will load the staging fbtft driver.
-
-Signed-off-by: Michael Kaplan <m.kaplan@evva.com>
----
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             | 12 +++
- .../boot/dts/overlays/ssd1306-spi-overlay.dts | 82 +++++++++++++++++++
- 3 files changed, 95 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -168,6 +168,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- 	spi6-1cs.dtbo \
- 	spi6-2cs.dtbo \
- 	ssd1306.dtbo \
-+	ssd1306-spi.dtbo \
- 	superaudioboard.dtbo \
- 	sx150x.dtbo \
- 	tc358743.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -2428,6 +2428,18 @@ Params: address                 Location
-         https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
- 
- 
-+Name:   ssd1306-spi
-+Info:   Overlay for SSD1306 OLED via SPI using fbtft staging driver.
-+Load:   dtoverlay=ssd1306-spi,<param>=<val>
-+Params: speed                   SPI bus speed (default 10000000)
-+        rotate                  Display rotation (0, 90, 180 or 270; default 0)
-+        fps                     Delay between frame updates (default 25)
-+        debug                   Debug output level (0-7; default 0)
-+        dc_pin                  GPIO pin for D/C (default 24)
-+        reset_pin               GPIO pin for RESET (default 25)
-+        height                  Display height (32 or 64; default 64)
-+
-+
- Name:   superaudioboard
- Info:   Configures the SuperAudioBoard sound card
- Load:   dtoverlay=superaudioboard,<param>=<val>
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts
-@@ -0,0 +1,82 @@
-+/*
-+ * Device Tree overlay for SSD1306 based SPI OLED display
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2835";
-+
-+	fragment@0 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&spidev0>;
-+		__overlay__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&spidev1>;
-+		__overlay__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	fragment@3 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			ssd1306_pins: ssd1306_pins {
-+                                brcm,pins = <25 24>;
-+                                brcm,function = <1 1>; /* out out */
-+			};
-+		};
-+	};
-+
-+	fragment@4 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			ssd1306: ssd1306@0{
-+				compatible = "solomon,ssd1306";
-+				reg = <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&ssd1306_pins>;
-+
-+				spi-max-frequency = <10000000>;
-+				bgr = <0>;
-+				bpp = <1>;
-+				rotate = <0>;
-+				fps = <25>;
-+				buswidth = <8>;
-+				reset-gpios = <&gpio 25 0>;
-+				dc-gpios = <&gpio 24 0>;
-+				debug = <0>;
-+
-+				solomon,height = <64>;
-+				solomon,width = <128>;
-+				solomon,page-offset = <0>;
-+			};
-+		};
-+	};
-+
-+	__overrides__ {
-+		speed		= <&ssd1306>,"spi-max-frequency:0";
-+		rotate		= <&ssd1306>,"rotate:0";
-+		fps		= <&ssd1306>,"fps:0";
-+		debug		= <&ssd1306>,"debug:0";
-+		dc_pin		= <&ssd1306>,"dc-gpios:4>";
-+		reset_pin	= <&ssd1306>,"reset-gpios:4>";
-+		height		= <&ssd1306>,"solomon,height:0>";
-+	};
-+};