aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0363-Allow-simultaneous-use-of-JustBoom-DAC-and-Digi.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0363-Allow-simultaneous-use-of-JustBoom-DAC-and-Digi.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0363-Allow-simultaneous-use-of-JustBoom-DAC-and-Digi.patch432
1 files changed, 432 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0363-Allow-simultaneous-use-of-JustBoom-DAC-and-Digi.patch b/target/linux/bcm27xx/patches-5.4/950-0363-Allow-simultaneous-use-of-JustBoom-DAC-and-Digi.patch
new file mode 100644
index 0000000000..d0d1e28757
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0363-Allow-simultaneous-use-of-JustBoom-DAC-and-Digi.patch
@@ -0,0 +1,432 @@
+From eecd29a4a5ede49427e48ea27e372b96d11f3d04 Mon Sep 17 00:00:00 2001
+From: Johannes Krude <johannes@krude.de>
+Date: Sat, 16 Nov 2019 13:14:43 +0100
+Subject: [PATCH] Allow simultaneous use of JustBoom DAC and Digi
+
+Signed-off-by: Johannes Krude <johannes@krude.de>
+---
+ arch/arm/boot/dts/overlays/Makefile | 1 +
+ arch/arm/boot/dts/overlays/README | 20 ++
+ .../dts/overlays/justboom-both-overlay.dts | 65 +++++
+ sound/soc/bcm/Kconfig | 12 +
+ sound/soc/bcm/Makefile | 2 +
+ sound/soc/bcm/justboom-both.c | 266 ++++++++++++++++++
+ 11 files changed, 371 insertions(+)
+ create mode 100644 arch/arm/boot/dts/overlays/justboom-both-overlay.dts
+ create mode 100644 sound/soc/bcm/justboom-both.c
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -86,6 +86,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ iqaudio-digi-wm8804-audio.dtbo \
+ irs1125.dtbo \
+ jedec-spi-nor.dtbo \
++ justboom-both.dtbo \
+ justboom-dac.dtbo \
+ justboom-digi.dtbo \
+ ltc294x.dtbo \
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -1388,6 +1388,26 @@ Params: flash-spi<n>-<m> Enables
+ on SPI<n>, CS#<m>.
+
+
++Name: justboom-both
++Info: Simultaneous usage of an justboom-dac and justboom-digi based
++ card
++Load: dtoverlay=justboom-both,<param>=<val>
++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec
++ Digital volume control. Enable with
++ "dtoverlay=justboom-dac,24db_digital_gain"
++ (The default behaviour is that the Digital
++ volume control is limited to a maximum of
++ 0dB. ie. it can attenuate but not provide
++ gain. For most users, this will be desired
++ as it will prevent clipping. By appending
++ the 24dB_digital_gain parameter, the Digital
++ volume control will allow up to 24dB of
++ gain. If this parameter is enabled, it is the
++ responsibility of the user to ensure that
++ the Digital volume control is set to a value
++ that does not result in clipping/distortion!)
++
++
+ Name: justboom-dac
+ Info: Configures the JustBoom DAC HAT, Amp HAT, DAC Zero and Amp Zero audio
+ cards
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/justboom-both-overlay.dts
+@@ -0,0 +1,65 @@
++// SPDX-License-Identifier: GPL-2.0
++// Definitions for JustBoom Both (Digi+DAC)
++/dts-v1/;
++/plugin/;
++
++/ {
++ compatible = "brcm,bcm2835";
++
++ fragment@0 {
++ target = <&i2s>;
++ __overlay__ {
++ status = "okay";
++ };
++ };
++
++ fragment@1 {
++ target = <&i2c1>;
++ __overlay__ {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++
++ wm8804@3b {
++ #sound-dai-cells = <0>;
++ compatible = "wlf,wm8804";
++ reg = <0x3b>;
++ PVDD-supply = <&vdd_3v3_reg>;
++ DVDD-supply = <&vdd_3v3_reg>;
++ status = "okay";
++ };
++ };
++ };
++
++ fragment@2 {
++ target = <&i2c1>;
++ __overlay__ {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++
++ pcm5122@4d {
++ #sound-dai-cells = <0>;
++ compatible = "ti,pcm5122";
++ reg = <0x4d>;
++ AVDD-supply = <&vdd_3v3_reg>;
++ DVDD-supply = <&vdd_3v3_reg>;
++ CPVDD-supply = <&vdd_3v3_reg>;
++ status = "okay";
++ };
++ };
++ };
++
++ fragment@3 {
++ target = <&sound>;
++ frag3: __overlay__ {
++ compatible = "justboom,justboom-both";
++ i2s-controller = <&i2s>;
++ status = "okay";
++ };
++ };
++
++ __overrides__ {
++ 24db_digital_gain = <&frag3>,"justboom,24db_digital_gain?";
++ };
++};
+--- a/sound/soc/bcm/Kconfig
++++ b/sound/soc/bcm/Kconfig
+@@ -105,6 +105,18 @@ config SND_BCM2708_SOC_RPI_PROTO
+ help
+ Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731).
+
++config SND_BCM2708_SOC_JUSTBOOM_BOTH
++ tristate "Support for simultaneous JustBoom Digi and JustBoom DAC"
++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
++ select SND_SOC_WM8804
++ select SND_SOC_PCM512x
++ help
++ Say Y or M if you want to add support for simultaneous
++ JustBoom Digi and JustBoom DAC.
++
++ This is not the right choice if you only have one but both of
++ these cards.
++
+ config SND_BCM2708_SOC_JUSTBOOM_DAC
+ tristate "Support for JustBoom DAC"
+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+--- a/sound/soc/bcm/Makefile
++++ b/sound/soc/bcm/Makefile
+@@ -17,6 +17,7 @@ snd-soc-hifiberry-dacplus-objs := hifibe
+ snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o
+ snd-soc-hifiberry-dacplusadcpro-objs := hifiberry_dacplusadcpro.o
+ snd-soc-hifiberry-dacplusdsp-objs := hifiberry_dacplusdsp.o
++snd-soc-justboom-both-objs := justboom-both.o
+ snd-soc-justboom-dac-objs := justboom-dac.o
+ snd-soc-rpi-cirrus-objs := rpi-cirrus.o
+ snd-soc-rpi-proto-objs := rpi-proto.o
+@@ -43,6 +44,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO) += snd-soc-hifiberry-dacplusadcpro.o
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP) += snd-soc-hifiberry-dacplusdsp.o
++obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_BOTH) += snd-soc-justboom-both.o
+ obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o
+ obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o
+ obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
+--- /dev/null
++++ b/sound/soc/bcm/justboom-both.c
+@@ -0,0 +1,266 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * rpi--wm8804.c -- ALSA SoC Raspberry Pi soundcard.
++ *
++ * Authors: Johannes Krude <johannes@krude.de
++ *
++ * Driver for when connecting simultaneously justboom-digi and justboom-dac
++ *
++ * Based upon code from:
++ * justboom-digi.c
++ * by Milan Neskovic <info@justboom.co>
++ * justboom-dac.c
++ * by Milan Neskovic <info@justboom.co>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/jack.h>
++
++#include "../codecs/wm8804.h"
++#include "../codecs/pcm512x.h"
++
++
++static bool digital_gain_0db_limit = true;
++
++static int snd_rpi_justboom_both_init(struct snd_soc_pcm_runtime *rtd)
++{
++ struct snd_soc_component *digi = rtd->codec_dais[0]->component;
++ struct snd_soc_component *dac = rtd->codec_dais[1]->component;
++
++ /* enable TX output */
++ snd_soc_component_update_bits(digi, WM8804_PWRDN, 0x4, 0x0);
++
++ snd_soc_component_update_bits(dac, PCM512x_GPIO_EN, 0x08, 0x08);
++ snd_soc_component_update_bits(dac, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02);
++ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08);
++
++ if (digital_gain_0db_limit) {
++ int ret;
++ struct snd_soc_card *card = rtd->card;
++
++ ret = snd_soc_limit_volume(card, "Digital Playback Volume",
++ 207);
++ if (ret < 0)
++ dev_warn(card->dev, "Failed to set volume limit: %d\n",
++ ret);
++ }
++
++ return 0;
++}
++
++static int snd_rpi_justboom_both_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *params)
++{
++ struct snd_soc_pcm_runtime *rtd = substream->private_data;
++ struct snd_soc_dai *codec_dai = rtd->codec_dai;
++ struct snd_soc_component *digi = rtd->codec_dais[0]->component;
++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++
++ int sysclk = 27000000; /* This is fixed on this board */
++
++ long mclk_freq = 0;
++ int mclk_div = 1;
++ int sampling_freq = 1;
++
++ int ret;
++
++ int samplerate = params_rate(params);
++
++ if (samplerate <= 96000) {
++ mclk_freq = samplerate*256;
++ mclk_div = WM8804_MCLKDIV_256FS;
++ } else {
++ mclk_freq = samplerate*128;
++ mclk_div = WM8804_MCLKDIV_128FS;
++ }
++
++ switch (samplerate) {
++ case 32000:
++ sampling_freq = 0x03;
++ break;
++ case 44100:
++ sampling_freq = 0x00;
++ break;
++ case 48000:
++ sampling_freq = 0x02;
++ break;
++ case 88200:
++ sampling_freq = 0x08;
++ break;
++ case 96000:
++ sampling_freq = 0x0a;
++ break;
++ case 176400:
++ sampling_freq = 0x0c;
++ break;
++ case 192000:
++ sampling_freq = 0x0e;
++ break;
++ default:
++ dev_err(rtd->card->dev,
++ "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n",
++ samplerate);
++ }
++
++ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div);
++ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq);
++
++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL,
++ sysclk, SND_SOC_CLOCK_OUT);
++ if (ret < 0) {
++ dev_err(rtd->card->dev,
++ "Failed to set WM8804 SYSCLK: %d\n", ret);
++ return ret;
++ }
++
++ /* Enable TX output */
++ snd_soc_component_update_bits(digi, WM8804_PWRDN, 0x4, 0x0);
++
++ /* Power on */
++ snd_soc_component_update_bits(digi, WM8804_PWRDN, 0x9, 0);
++
++ /* set sampling frequency status bits */
++ snd_soc_component_update_bits(digi, WM8804_SPDTX4, 0x0f, sampling_freq);
++
++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64);
++}
++
++static int snd_rpi_justboom_both_startup(struct snd_pcm_substream *substream)
++{
++ struct snd_soc_pcm_runtime *rtd = substream->private_data;
++ struct snd_soc_component *digi = rtd->codec_dais[0]->component;
++ struct snd_soc_component *dac = rtd->codec_dais[1]->component;
++
++ /* turn on digital output */
++ snd_soc_component_update_bits(digi, WM8804_PWRDN, 0x3c, 0x00);
++
++ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08);
++
++ return 0;
++}
++
++static void snd_rpi_justboom_both_shutdown(struct snd_pcm_substream *substream)
++{
++ struct snd_soc_pcm_runtime *rtd = substream->private_data;
++ struct snd_soc_component *digi = rtd->codec_dais[0]->component;
++ struct snd_soc_component *dac = rtd->codec_dais[1]->component;
++
++ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x00);
++
++ /* turn off output */
++ snd_soc_component_update_bits(digi, WM8804_PWRDN, 0x3c, 0x3c);
++}
++
++/* machine stream operations */
++static struct snd_soc_ops snd_rpi_justboom_both_ops = {
++ .hw_params = snd_rpi_justboom_both_hw_params,
++ .startup = snd_rpi_justboom_both_startup,
++ .shutdown = snd_rpi_justboom_both_shutdown,
++};
++
++SND_SOC_DAILINK_DEFS(rpi_justboom_both,
++ DAILINK_COMP_ARRAY(COMP_CPU("bcm2708-i2s.0")),
++ DAILINK_COMP_ARRAY(COMP_CODEC("pcm512x.1-004d", "pcm512x-hifi"),
++ COMP_CODEC("wm8804.1-003b", "wm8804-spdif")),
++ DAILINK_COMP_ARRAY(COMP_PLATFORM("bcm2708-i2s.0")));
++
++static struct snd_soc_dai_link snd_rpi_justboom_both_dai[] = {
++{
++ .name = "JustBoom Digi",
++ .stream_name = "JustBoom Digi HiFi",
++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
++ SND_SOC_DAIFMT_CBM_CFM,
++ .ops = &snd_rpi_justboom_both_ops,
++ .init = snd_rpi_justboom_both_init,
++ SND_SOC_DAILINK_REG(rpi_justboom_both),
++},
++};
++
++/* audio machine driver */
++static struct snd_soc_card snd_rpi_justboom_both = {
++ .name = "snd_rpi_justboom_both",
++ .driver_name = "JustBoomBoth",
++ .owner = THIS_MODULE,
++ .dai_link = snd_rpi_justboom_both_dai,
++ .num_links = ARRAY_SIZE(snd_rpi_justboom_both_dai),
++};
++
++static int snd_rpi_justboom_both_probe(struct platform_device *pdev)
++{
++ int ret = 0;
++ struct snd_soc_card *card = &snd_rpi_justboom_both;
++
++ snd_rpi_justboom_both.dev = &pdev->dev;
++
++ if (pdev->dev.of_node) {
++ struct device_node *i2s_node;
++ struct snd_soc_dai_link *dai = &snd_rpi_justboom_both_dai[0];
++
++ i2s_node = of_parse_phandle(pdev->dev.of_node,
++ "i2s-controller", 0);
++
++ if (i2s_node) {
++ int i;
++
++ for (i = 0; i < card->num_links; i++) {
++ dai->cpus->dai_name = NULL;
++ dai->cpus->of_node = i2s_node;
++ dai->platforms->name = NULL;
++ dai->platforms->of_node = i2s_node;
++ }
++ }
++
++ digital_gain_0db_limit = !of_property_read_bool(
++ pdev->dev.of_node, "justboom,24db_digital_gain");
++ }
++
++ ret = snd_soc_register_card(card);
++ if (ret && ret != -EPROBE_DEFER) {
++ dev_err(&pdev->dev,
++ "snd_soc_register_card() failed: %d\n", ret);
++ }
++
++ return ret;
++}
++
++static int snd_rpi_justboom_both_remove(struct platform_device *pdev)
++{
++ return snd_soc_unregister_card(&snd_rpi_justboom_both);
++}
++
++static const struct of_device_id snd_rpi_justboom_both_of_match[] = {
++ { .compatible = "justboom,justboom-both", },
++ {},
++};
++MODULE_DEVICE_TABLE(of, snd_rpi_justboom_both_of_match);
++
++static struct platform_driver snd_rpi_justboom_both_driver = {
++ .driver = {
++ .name = "snd-rpi-justboom-both",
++ .owner = THIS_MODULE,
++ .of_match_table = snd_rpi_justboom_both_of_match,
++ },
++ .probe = snd_rpi_justboom_both_probe,
++ .remove = snd_rpi_justboom_both_remove,
++};
++
++module_platform_driver(snd_rpi_justboom_both_driver);
++
++MODULE_AUTHOR("Johannes Krude <johannes@krude.de>");
++MODULE_DESCRIPTION("ASoC Driver for simultaneous use of JustBoom PI Digi & DAC HAT Sound Cards");
++MODULE_LICENSE("GPL v2");