aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch1024
1 files changed, 1024 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch b/target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch
new file mode 100644
index 0000000000..15e4f53a0a
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch
@@ -0,0 +1,1024 @@
+From 19a0ac654994661f63f7c9e099ed91a1210af161 Mon Sep 17 00:00:00 2001
+From: Stefan Wahren <wahrenst@gmx.net>
+Date: Sun, 6 Oct 2019 15:41:25 +0200
+Subject: [PATCH] ARM: dts: Add minimal Raspberry Pi 4 support
+
+This adds minimal support for the new Raspberry Pi 4 without the
+fancy stuff like GENET, PCIe, xHCI, 40 bit DMA and V3D. The RPi 4 is
+available in 3 different variants (1, 2 and 4 GB RAM), so leave the memory
+size to zero and let the bootloader take care of it. The DWC2 is still
+usable as peripheral via the USB-C port.
+
+Other differences to the Raspberry Pi 3:
+- additional GIC 400 Interrupt controller
+- new thermal IP and HWRNG
+- additional MMC interface (emmc2)
+- additional UART, I2C, SPI and PWM interfaces
+- clock stretching bug in I2C IP has been fixed
+
+Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
+Acked-by: Eric Anholt <eric@anholt.net>
+Acked-by: Florian Fanelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 123 +++
+ arch/arm/boot/dts/bcm2711.dtsi | 844 ++++++++++++++++++
+ .../boot/dts/bcm283x-rpi-usb-peripheral.dtsi | 7 +
+ 4 files changed, 975 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+ create mode 100644 arch/arm/boot/dts/bcm2711.dtsi
+ create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -97,6 +97,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
+ bcm2837-rpi-3-b.dtb \
+ bcm2837-rpi-3-b-plus.dtb \
+ bcm2837-rpi-cm3-io3.dtb \
++ bcm2711-rpi-4-b.dtb \
+ bcm2835-rpi-zero.dtb \
+ bcm2835-rpi-zero-w.dtb
+ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+@@ -0,0 +1,123 @@
++// SPDX-License-Identifier: GPL-2.0
++/dts-v1/;
++#include "bcm2711.dtsi"
++#include "bcm2835-rpi.dtsi"
++#include "bcm283x-rpi-usb-peripheral.dtsi"
++
++/ {
++ compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
++ model = "Raspberry Pi 4 Model B";
++
++ chosen {
++ /* 8250 auxiliary UART instead of pl011 */
++ stdout-path = "serial1:115200n8";
++ };
++
++ /* Will be filled by the bootloader */
++ memory@0 {
++ device_type = "memory";
++ reg = <0 0 0>;
++ };
++
++ leds {
++ act {
++ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
++ };
++
++ pwr {
++ label = "PWR";
++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ wifi_pwrseq: wifi-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
++ };
++
++ sd_io_1v8_reg: sd_io_1v8_reg {
++ compatible = "regulator-gpio";
++ regulator-name = "vdd-sd-io";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-settling-time-us = <5000>;
++ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
++ states = <1800000 0x1
++ 3300000 0x0>;
++ status = "okay";
++ };
++};
++
++&firmware {
++ expgpio: gpio {
++ compatible = "raspberrypi,firmware-gpio";
++ gpio-controller;
++ #gpio-cells = <2>;
++ gpio-line-names = "BT_ON",
++ "WL_ON",
++ "PWR_LED_OFF",
++ "GLOBAL_RESET",
++ "VDD_SD_IO_SEL",
++ "CAM_GPIO",
++ "",
++ "";
++ status = "okay";
++ };
++};
++
++&pwm1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
++ status = "okay";
++};
++
++/* SDHCI is used to control the SDIO for wireless */
++&sdhci {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&emmc_gpio34>;
++ bus-width = <4>;
++ non-removable;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ status = "okay";
++
++ brcmf: wifi@1 {
++ reg = <1>;
++ compatible = "brcm,bcm4329-fmac";
++ };
++};
++
++/* EMMC2 is used to drive the SD card */
++&emmc2 {
++ vqmmc-supply = <&sd_io_1v8_reg>;
++ broken-cd;
++ status = "okay";
++};
++
++/* uart0 communicates with the BT module */
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
++ uart-has-rtscts;
++ status = "okay";
++
++ bluetooth {
++ compatible = "brcm,bcm43438-bt";
++ max-speed = <2000000>;
++ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
++ };
++};
++
++/* uart1 is mapped to the pin header */
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1_gpio14>;
++ status = "okay";
++};
++
++&vchiq {
++ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2711.dtsi
+@@ -0,0 +1,844 @@
++// SPDX-License-Identifier: GPL-2.0
++#include "bcm283x.dtsi"
++
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++#include <dt-bindings/soc/bcm2835-pm.h>
++
++/ {
++ compatible = "brcm,bcm2711";
++
++ #address-cells = <2>;
++ #size-cells = <1>;
++
++ interrupt-parent = <&gicv2>;
++
++ soc {
++ /*
++ * Defined ranges:
++ * Common BCM283x peripherals
++ * BCM2711-specific peripherals
++ * ARM-local peripherals
++ */
++ ranges = <0x7e000000 0x0 0xfe000000 0x01800000>,
++ <0x7c000000 0x0 0xfc000000 0x02000000>,
++ <0x40000000 0x0 0xff800000 0x00800000>;
++ /* Emulate a contiguous 30-bit address range for DMA */
++ dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>;
++
++ /*
++ * This node is the provider for the enable-method for
++ * bringing up secondary cores.
++ */
++ local_intc: local_intc@40000000 {
++ compatible = "brcm,bcm2836-l1-intc";
++ reg = <0x40000000 0x100>;
++ };
++
++ gicv2: interrupt-controller@40041000 {
++ interrupt-controller;
++ #interrupt-cells = <3>;
++ compatible = "arm,gic-400";
++ reg = <0x40041000 0x1000>,
++ <0x40042000 0x2000>,
++ <0x40044000 0x2000>,
++ <0x40046000 0x2000>;
++ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_HIGH)>;
++ };
++
++ dma: dma@7e007000 {
++ compatible = "brcm,bcm2835-dma";
++ reg = <0x7e007000 0xb00>;
++ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
++ /* DMA lite 7 - 10 */
++ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "dma0",
++ "dma1",
++ "dma2",
++ "dma3",
++ "dma4",
++ "dma5",
++ "dma6",
++ "dma7",
++ "dma8",
++ "dma9",
++ "dma10";
++ #dma-cells = <1>;
++ brcm,dma-channel-mask = <0x07f5>;
++ };
++
++ pm: watchdog@7e100000 {
++ compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
++ #power-domain-cells = <1>;
++ #reset-cells = <1>;
++ reg = <0x7e100000 0x114>,
++ <0x7e00a000 0x24>,
++ <0x7ec11000 0x20>;
++ clocks = <&clocks BCM2835_CLOCK_V3D>,
++ <&clocks BCM2835_CLOCK_PERI_IMAGE>,
++ <&clocks BCM2835_CLOCK_H264>,
++ <&clocks BCM2835_CLOCK_ISP>;
++ clock-names = "v3d", "peri_image", "h264", "isp";
++ system-power-controller;
++ };
++
++ rng@7e104000 {
++ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
++
++ /* RNG is incompatible with brcm,bcm2835-rng */
++ status = "disabled";
++ };
++
++ uart2: serial@7e201400 {
++ compatible = "arm,pl011", "arm,primecell";
++ reg = <0x7e201400 0x200>;
++ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_UART>,
++ <&clocks BCM2835_CLOCK_VPU>;
++ clock-names = "uartclk", "apb_pclk";
++ arm,primecell-periphid = <0x00241011>;
++ status = "disabled";
++ };
++
++ uart3: serial@7e201600 {
++ compatible = "arm,pl011", "arm,primecell";
++ reg = <0x7e201600 0x200>;
++ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_UART>,
++ <&clocks BCM2835_CLOCK_VPU>;
++ clock-names = "uartclk", "apb_pclk";
++ arm,primecell-periphid = <0x00241011>;
++ status = "disabled";
++ };
++
++ uart4: serial@7e201800 {
++ compatible = "arm,pl011", "arm,primecell";
++ reg = <0x7e201800 0x200>;
++ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_UART>,
++ <&clocks BCM2835_CLOCK_VPU>;
++ clock-names = "uartclk", "apb_pclk";
++ arm,primecell-periphid = <0x00241011>;
++ status = "disabled";
++ };
++
++ uart5: serial@7e201a00 {
++ compatible = "arm,pl011", "arm,primecell";
++ reg = <0x7e201a00 0x200>;
++ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_UART>,
++ <&clocks BCM2835_CLOCK_VPU>;
++ clock-names = "uartclk", "apb_pclk";
++ arm,primecell-periphid = <0x00241011>;
++ status = "disabled";
++ };
++
++ spi3: spi@7e204600 {
++ compatible = "brcm,bcm2835-spi";
++ reg = <0x7e204600 0x0200>;
++ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ spi4: spi@7e204800 {
++ compatible = "brcm,bcm2835-spi";
++ reg = <0x7e204800 0x0200>;
++ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ spi5: spi@7e204a00 {
++ compatible = "brcm,bcm2835-spi";
++ reg = <0x7e204a00 0x0200>;
++ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ spi6: spi@7e204c00 {
++ compatible = "brcm,bcm2835-spi";
++ reg = <0x7e204c00 0x0200>;
++ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ i2c3: i2c@7e205600 {
++ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
++ reg = <0x7e205600 0x200>;
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ i2c4: i2c@7e205800 {
++ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
++ reg = <0x7e205800 0x200>;
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ i2c5: i2c@7e205a00 {
++ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
++ reg = <0x7e205a00 0x200>;
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ i2c6: i2c@7e205c00 {
++ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
++ reg = <0x7e205c00 0x200>;
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ };
++
++ pwm1: pwm@7e20c800 {
++ compatible = "brcm,bcm2835-pwm";
++ reg = <0x7e20c800 0x28>;
++ clocks = <&clocks BCM2835_CLOCK_PWM>;
++ assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
++ assigned-clock-rates = <10000000>;
++ #pwm-cells = <2>;
++ status = "disabled";
++ };
++
++ emmc2: emmc2@7e340000 {
++ compatible = "brcm,bcm2711-emmc2";
++ reg = <0x7e340000 0x100>;
++ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clocks BCM2711_CLOCK_EMMC2>;
++ status = "disabled";
++ };
++
++ hvs@7e400000 {
++ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
++ };
++ };
++
++ arm-pmu {
++ compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
++ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
++ IRQ_TYPE_LEVEL_LOW)>;
++ /* This only applies to the ARMv7 stub */
++ arm,cpu-registers-not-fw-configured;
++ };
++
++ cpus: cpus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
++
++ cpu0: cpu@0 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0x000000d8>;
++ };
++
++ cpu1: cpu@1 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <1>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0x000000e0>;
++ };
++
++ cpu2: cpu@2 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <2>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0x000000e8>;
++ };
++
++ cpu3: cpu@3 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <3>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0x000000f0>;
++ };
++ };
++};
++
++&clk_osc {
++ clock-frequency = <54000000>;
++};
++
++&clocks {
++ compatible = "brcm,bcm2711-cprman";
++};
++
++&cpu_thermal {
++ coefficients = <(-487) 410040>;
++};
++
++&dsi0 {
++ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&dsi1 {
++ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&gpio {
++ compatible = "brcm,bcm2711-gpio";
++ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
++
++ gpclk0_gpio49: gpclk0_gpio49 {
++ pin-gpclk {
++ pins = "gpio49";
++ function = "alt1";
++ bias-disable;
++ };
++ };
++ gpclk1_gpio50: gpclk1_gpio50 {
++ pin-gpclk {
++ pins = "gpio50";
++ function = "alt1";
++ bias-disable;
++ };
++ };
++ gpclk2_gpio51: gpclk2_gpio51 {
++ pin-gpclk {
++ pins = "gpio51";
++ function = "alt1";
++ bias-disable;
++ };
++ };
++
++ i2c0_gpio46: i2c0_gpio46 {
++ pin-sda {
++ function = "alt0";
++ pins = "gpio46";
++ bias-pull-up;
++ };
++ pin-scl {
++ function = "alt0";
++ pins = "gpio47";
++ bias-disable;
++ };
++ };
++ i2c1_gpio46: i2c1_gpio46 {
++ pin-sda {
++ function = "alt1";
++ pins = "gpio46";
++ bias-pull-up;
++ };
++ pin-scl {
++ function = "alt1";
++ pins = "gpio47";
++ bias-disable;
++ };
++ };
++ i2c3_gpio2: i2c3_gpio2 {
++ pin-sda {
++ function = "alt5";
++ pins = "gpio2";
++ bias-pull-up;
++ };
++ pin-scl {
++ function = "alt5";
++ pins = "gpio3";
++ bias-disable;
++ };
++ };
++ i2c3_gpio4: i2c3_gpio4 {
++ pin-sda {
++ function = "alt5";
++ pins = "gpio4";
++ bias-pull-up;
++ };
++ pin-scl {
++ function = "alt5";
++ pins = "gpio5";
++ bias-disable;
++ };
++ };
++ i2c4_gpio6: i2c4_gpio6 {
++ pin-sda {
++ function = "alt5";
++ pins = "gpio6";
++ bias-pull-up;
++ };
++ pin-scl {
++ function = "alt5";
++ pins = "gpio7";
++ bias-disable;
++ };
++ };
++ i2c4_gpio8: i2c4_gpio8 {
++ pin-sda {
++ function = "alt5";
++ pins = "gpio8";
++ bias-pull-up;
++ };
++ pin-scl {
++ function = "alt5";
++ pins = "gpio9";
++ bias-disable;
++ };
++ };
++ i2c5_gpio10: i2c5_gpio10 {
++ pin-sda {
++ function = "alt5";
++ pins = "gpio10";
++ bias-pull-up;
++ };
++ pin-scl {
++ function = "alt5";
++ pins = "gpio11";
++ bias-disable;
++ };
++ };
++ i2c5_gpio12: i2c5_gpio12 {
++ pin-sda {
++ function = "alt5";
++ pins = "gpio12";
++ bias-pull-up;
++ };
++ pin-scl {
++ function = "alt5";
++ pins = "gpio13";
++ bias-disable;
++ };
++ };
++ i2c6_gpio0: i2c6_gpio0 {
++ pin-sda {
++ function = "alt5";
++ pins = "gpio0";
++ bias-pull-up;
++ };
++ pin-scl {
++ function = "alt5";
++ pins = "gpio1";
++ bias-disable;
++ };
++ };
++ i2c6_gpio22: i2c6_gpio22 {
++ pin-sda {
++ function = "alt5";
++ pins = "gpio22";
++ bias-pull-up;
++ };
++ pin-scl {
++ function = "alt5";
++ pins = "gpio23";
++ bias-disable;
++ };
++ };
++ i2c_slave_gpio8: i2c_slave_gpio8 {
++ pins-i2c-slave {
++ pins = "gpio8",
++ "gpio9",
++ "gpio10",
++ "gpio11";
++ function = "alt3";
++ };
++ };
++
++ jtag_gpio48: jtag_gpio48 {
++ pins-jtag {
++ pins = "gpio48",
++ "gpio49",
++ "gpio50",
++ "gpio51",
++ "gpio52",
++ "gpio53";
++ function = "alt4";
++ };
++ };
++
++ mii_gpio28: mii_gpio28 {
++ pins-mii {
++ pins = "gpio28",
++ "gpio29",
++ "gpio30",
++ "gpio31";
++ function = "alt4";
++ };
++ };
++ mii_gpio36: mii_gpio36 {
++ pins-mii {
++ pins = "gpio36",
++ "gpio37",
++ "gpio38",
++ "gpio39";
++ function = "alt5";
++ };
++ };
++
++ pcm_gpio50: pcm_gpio50 {
++ pins-pcm {
++ pins = "gpio50",
++ "gpio51",
++ "gpio52",
++ "gpio53";
++ function = "alt2";
++ };
++ };
++
++ pwm0_0_gpio12: pwm0_0_gpio12 {
++ pin-pwm {
++ pins = "gpio12";
++ function = "alt0";
++ bias-disable;
++ };
++ };
++ pwm0_0_gpio18: pwm0_0_gpio18 {
++ pin-pwm {
++ pins = "gpio18";
++ function = "alt5";
++ bias-disable;
++ };
++ };
++ pwm1_0_gpio40: pwm1_0_gpio40 {
++ pin-pwm {
++ pins = "gpio40";
++ function = "alt0";
++ bias-disable;
++ };
++ };
++ pwm0_1_gpio13: pwm0_1_gpio13 {
++ pin-pwm {
++ pins = "gpio13";
++ function = "alt0";
++ bias-disable;
++ };
++ };
++ pwm0_1_gpio19: pwm0_1_gpio19 {
++ pin-pwm {
++ pins = "gpio19";
++ function = "alt5";
++ bias-disable;
++ };
++ };
++ pwm1_1_gpio41: pwm1_1_gpio41 {
++ pin-pwm {
++ pins = "gpio41";
++ function = "alt0";
++ bias-disable;
++ };
++ };
++ pwm0_1_gpio45: pwm0_1_gpio45 {
++ pin-pwm {
++ pins = "gpio45";
++ function = "alt0";
++ bias-disable;
++ };
++ };
++ pwm0_0_gpio52: pwm0_0_gpio52 {
++ pin-pwm {
++ pins = "gpio52";
++ function = "alt1";
++ bias-disable;
++ };
++ };
++ pwm0_1_gpio53: pwm0_1_gpio53 {
++ pin-pwm {
++ pins = "gpio53";
++ function = "alt1";
++ bias-disable;
++ };
++ };
++
++ rgmii_gpio35: rgmii_gpio35 {
++ pin-start-stop {
++ pins = "gpio35";
++ function = "alt4";
++ };
++ pin-rx-ok {
++ pins = "gpio36";
++ function = "alt4";
++ };
++ };
++ rgmii_irq_gpio34: rgmii_irq_gpio34 {
++ pin-irq {
++ pins = "gpio34";
++ function = "alt5";
++ };
++ };
++ rgmii_irq_gpio39: rgmii_irq_gpio39 {
++ pin-irq {
++ pins = "gpio39";
++ function = "alt4";
++ };
++ };
++ rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
++ pins-mdio {
++ pins = "gpio28",
++ "gpio29";
++ function = "alt5";
++ };
++ };
++ rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
++ pins-mdio {
++ pins = "gpio37",
++ "gpio38";
++ function = "alt4";
++ };
++ };
++
++ spi0_gpio46: spi0_gpio46 {
++ pins-spi {
++ pins = "gpio46",
++ "gpio47",
++ "gpio48",
++ "gpio49";
++ function = "alt2";
++ };
++ };
++ spi2_gpio46: spi2_gpio46 {
++ pins-spi {
++ pins = "gpio46",
++ "gpio47",
++ "gpio48",
++ "gpio49",
++ "gpio50";
++ function = "alt5";
++ };
++ };
++ spi3_gpio0: spi3_gpio0 {
++ pins-spi {
++ pins = "gpio0",
++ "gpio1",
++ "gpio2",
++ "gpio3";
++ function = "alt3";
++ };
++ };
++ spi4_gpio4: spi4_gpio4 {
++ pins-spi {
++ pins = "gpio4",
++ "gpio5",
++ "gpio6",
++ "gpio7";
++ function = "alt3";
++ };
++ };
++ spi5_gpio12: spi5_gpio12 {
++ pins-spi {
++ pins = "gpio12",
++ "gpio13",
++ "gpio14",
++ "gpio15";
++ function = "alt3";
++ };
++ };
++ spi6_gpio18: spi6_gpio18 {
++ pins-spi {
++ pins = "gpio18",
++ "gpio19",
++ "gpio20",
++ "gpio21";
++ function = "alt3";
++ };
++ };
++
++ uart2_gpio0: uart2_gpio0 {
++ pin-tx {
++ pins = "gpio0";
++ function = "alt4";
++ bias-disable;
++ };
++ pin-rx {
++ pins = "gpio1";
++ function = "alt4";
++ bias-pull-up;
++ };
++ };
++ uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
++ pin-cts {
++ pins = "gpio2";
++ function = "alt4";
++ bias-pull-up;
++ };
++ pin-rts {
++ pins = "gpio3";
++ function = "alt4";
++ bias-disable;
++ };
++ };
++ uart3_gpio4: uart3_gpio4 {
++ pin-tx {
++ pins = "gpio4";
++ function = "alt4";
++ bias-disable;
++ };
++ pin-rx {
++ pins = "gpio5";
++ function = "alt4";
++ bias-pull-up;
++ };
++ };
++ uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
++ pin-cts {
++ pins = "gpio6";
++ function = "alt4";
++ bias-pull-up;
++ };
++ pin-rts {
++ pins = "gpio7";
++ function = "alt4";
++ bias-disable;
++ };
++ };
++ uart4_gpio8: uart4_gpio8 {
++ pin-tx {
++ pins = "gpio8";
++ function = "alt4";
++ bias-disable;
++ };
++ pin-rx {
++ pins = "gpio9";
++ function = "alt4";
++ bias-pull-up;
++ };
++ };
++ uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
++ pin-cts {
++ pins = "gpio10";
++ function = "alt4";
++ bias-pull-up;
++ };
++ pin-rts {
++ pins = "gpio11";
++ function = "alt4";
++ bias-disable;
++ };
++ };
++ uart5_gpio12: uart5_gpio12 {
++ pin-tx {
++ pins = "gpio12";
++ function = "alt4";
++ bias-disable;
++ };
++ pin-rx {
++ pins = "gpio13";
++ function = "alt4";
++ bias-pull-up;
++ };
++ };
++ uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
++ pin-cts {
++ pins = "gpio14";
++ function = "alt4";
++ bias-pull-up;
++ };
++ pin-rts {
++ pins = "gpio15";
++ function = "alt4";
++ bias-disable;
++ };
++ };
++};
++
++&i2c0 {
++ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&i2c1 {
++ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
++ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&mailbox {
++ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&sdhci {
++ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&sdhost {
++ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&spi {
++ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&spi1 {
++ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&spi2 {
++ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&system_timer {
++ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&txp {
++ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&uart0 {
++ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&uart1 {
++ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&usb {
++ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
++};
++
++&vec {
++ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
+@@ -0,0 +1,7 @@
++// SPDX-License-Identifier: GPL-2.0
++&usb {
++ dr_mode = "peripheral";
++ g-rx-fifo-size = <256>;
++ g-np-tx-fifo-size = <32>;
++ g-tx-fifo-size = <256 256 512 512 512 768 768>;
++};