aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0640-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0640-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0640-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch2709
1 files changed, 2709 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0640-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch b/target/linux/bcm27xx/patches-5.4/950-0640-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch
new file mode 100644
index 0000000000..e142f598ad
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0640-media-bcm2835-unicam-Driver-for-CCP2-CSI2-camera-int.patch
@@ -0,0 +1,2709 @@
+From 33a897162230dfc35b854aae2bec1ce8c2996642 Mon Sep 17 00:00:00 2001
+From: Naushir Patuck <naush@raspberrypi.com>
+Date: Wed, 1 Apr 2020 08:39:49 +0100
+Subject: [PATCH] media: bcm2835-unicam: Driver for CCP2/CSI2 camera
+ interface
+
+Add driver for the Unicam camera receiver block on
+BCM283x processors.
+
+This commit is made up of a series of changes cherry-picked from the
+rpi-4.19.y branch.
+
+Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
+Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
+---
+ MAINTAINERS | 2 +-
+ drivers/media/platform/Kconfig | 1 +
+ drivers/media/platform/Makefile | 2 +
+ drivers/media/platform/bcm2835/Kconfig | 14 +
+ drivers/media/platform/bcm2835/Makefile | 3 +
+ .../media/platform/bcm2835/bcm2835-unicam.c | 2369 +++++++++++++++++
+ .../media/platform/bcm2835/vc4-regs-unicam.h | 253 ++
+ 7 files changed, 2643 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/media/platform/bcm2835/Kconfig
+ create mode 100644 drivers/media/platform/bcm2835/Makefile
+ create mode 100644 drivers/media/platform/bcm2835/bcm2835-unicam.c
+ create mode 100644 drivers/media/platform/bcm2835/vc4-regs-unicam.h
+
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -3206,7 +3206,7 @@ F: Documentation/devicetree/bindings/med
+ F: drivers/staging/media/rpivid
+
+ BROADCOM BCM2835 CAMERA DRIVER
+-M: Dave Stevenson <dave.stevenson@raspberrypi.org>
++M: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+ L: linux-media@vger.kernel.org
+ S: Maintained
+ F: drivers/media/platform/bcm2835/
+--- a/drivers/media/platform/Kconfig
++++ b/drivers/media/platform/Kconfig
+@@ -146,6 +146,7 @@ source "drivers/media/platform/am437x/Kc
+ source "drivers/media/platform/xilinx/Kconfig"
+ source "drivers/media/platform/rcar-vin/Kconfig"
+ source "drivers/media/platform/atmel/Kconfig"
++source "drivers/media/platform/bcm2835/Kconfig"
+ source "drivers/media/platform/sunxi/Kconfig"
+
+ config VIDEO_TI_CAL
+--- a/drivers/media/platform/Makefile
++++ b/drivers/media/platform/Makefile
+@@ -100,4 +100,6 @@ obj-y += meson/
+
+ obj-y += cros-ec-cec/
+
++obj-y += bcm2835/
++
+ obj-y += sunxi/
+--- /dev/null
++++ b/drivers/media/platform/bcm2835/Kconfig
+@@ -0,0 +1,14 @@
++# Broadcom VideoCore4 V4L2 camera support
++
++config VIDEO_BCM2835_UNICAM
++ tristate "Broadcom BCM2835 Unicam video capture driver"
++ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER
++ depends on ARCH_BCM2835 || COMPILE_TEST
++ select VIDEOBUF2_DMA_CONTIG
++ select V4L2_FWNODE
++ help
++ Say Y here to enable V4L2 subdevice for CSI2 receiver.
++ This is a V4L2 subdevice that interfaces directly to the VC4 peripheral.
++
++ To compile this driver as a module, choose M here. The module
++ will be called bcm2835-unicam.
+--- /dev/null
++++ b/drivers/media/platform/bcm2835/Makefile
+@@ -0,0 +1,3 @@
++# Makefile for BCM2835 Unicam driver
++
++obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o
+--- /dev/null
++++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c
+@@ -0,0 +1,2369 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * BCM2835 Unicam Capture Driver
++ *
++ * Copyright (C) 2017-2020 - Raspberry Pi (Trading) Ltd.
++ *
++ * Dave Stevenson <dave.stevenson@raspberrypi.com>
++ *
++ * Based on TI am437x driver by
++ * Benoit Parrot <bparrot@ti.com>
++ * Lad, Prabhakar <prabhakar.csengg@gmail.com>
++ *
++ * and TI CAL camera interface driver by
++ * Benoit Parrot <bparrot@ti.com>
++ *
++ *
++ * There are two camera drivers in the kernel for BCM283x - this one
++ * and bcm2835-camera (currently in staging).
++ *
++ * This driver directly controls the Unicam peripheral - there is no
++ * involvement with the VideoCore firmware. Unicam receives CSI-2 or
++ * CCP2 data and writes it into SDRAM.
++ * The only potential processing options are to repack Bayer data into an
++ * alternate format, and applying windowing.
++ * The repacking does not shift the data, so can repack V4L2_PIX_FMT_Sxxxx10P
++ * to V4L2_PIX_FMT_Sxxxx10, or V4L2_PIX_FMT_Sxxxx12P to V4L2_PIX_FMT_Sxxxx12,
++ * but not generically up to V4L2_PIX_FMT_Sxxxx16. The driver will add both
++ * formats where the relevant formats are defined, and will automatically
++ * configure the repacking as required.
++ * Support for windowing may be added later.
++ *
++ * It should be possible to connect this driver to any sensor with a
++ * suitable output interface and V4L2 subdevice driver.
++ *
++ * bcm2835-camera uses the VideoCore firmware to control the sensor,
++ * Unicam, ISP, and all tuner control loops. Fully processed frames are
++ * delivered to the driver by the firmware. It only has sensor drivers
++ * for Omnivision OV5647, and Sony IMX219 sensors.
++ *
++ * The two drivers are mutually exclusive for the same Unicam instance.
++ * The VideoCore firmware checks the device tree configuration during boot.
++ * If it finds device tree nodes called csi0 or csi1 it will block the
++ * firmware from accessing the peripheral, and bcm2835-camera will
++ * not be able to stream data.
++ */
++
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of_device.h>
++#include <linux/of_graph.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/platform_device.h>
++#include <linux/pm_runtime.h>
++#include <linux/slab.h>
++#include <linux/uaccess.h>
++#include <linux/videodev2.h>
++
++#include <media/v4l2-common.h>
++#include <media/v4l2-ctrls.h>
++#include <media/v4l2-dev.h>
++#include <media/v4l2-device.h>
++#include <media/v4l2-dv-timings.h>
++#include <media/v4l2-event.h>
++#include <media/v4l2-ioctl.h>
++#include <media/v4l2-fwnode.h>
++#include <media/videobuf2-dma-contig.h>
++
++#include "vc4-regs-unicam.h"
++
++#define UNICAM_MODULE_NAME "unicam"
++#define UNICAM_VERSION "0.1.0"
++
++static int debug;
++module_param(debug, int, 0644);
++MODULE_PARM_DESC(debug, "Debug level 0-3");
++
++#define unicam_dbg(level, dev, fmt, arg...) \
++ v4l2_dbg(level, debug, &(dev)->v4l2_dev, fmt, ##arg)
++#define unicam_info(dev, fmt, arg...) \
++ v4l2_info(&(dev)->v4l2_dev, fmt, ##arg)
++#define unicam_err(dev, fmt, arg...) \
++ v4l2_err(&(dev)->v4l2_dev, fmt, ##arg)
++
++/* To protect against a dodgy sensor driver never returning an error from
++ * enum_mbus_code, set a maximum index value to be used.
++ */
++#define MAX_ENUM_MBUS_CODE 128
++
++/*
++ * Stride is a 16 bit register, but also has to be a multiple of 32.
++ */
++#define BPL_ALIGNMENT 32
++#define MAX_BYTESPERLINE ((1 << 16) - BPL_ALIGNMENT)
++/*
++ * Max width is therefore determined by the max stride divided by
++ * the number of bits per pixel. Take 32bpp as a
++ * worst case.
++ * No imposed limit on the height, so adopt a square image for want
++ * of anything better.
++ */
++#define MAX_WIDTH (MAX_BYTESPERLINE / 4)
++#define MAX_HEIGHT MAX_WIDTH
++/* Define a nominal minimum image size */
++#define MIN_WIDTH 16
++#define MIN_HEIGHT 16
++
++/*
++ * struct unicam_fmt - Unicam media bus format information
++ * @pixelformat: V4L2 pixel format FCC identifier. 0 if n/a.
++ * @repacked_fourcc: V4L2 pixel format FCC identifier if the data is expanded
++ * out to 16bpp. 0 if n/a.
++ * @code: V4L2 media bus format code.
++ * @depth: Bits per pixel as delivered from the source.
++ * @csi_dt: CSI data type.
++ * @check_variants: Flag to denote that there are multiple mediabus formats
++ * still in the list that could match this V4L2 format.
++ */
++struct unicam_fmt {
++ u32 fourcc;
++ u32 repacked_fourcc;
++ u32 code;
++ u8 depth;
++ u8 csi_dt;
++ u8 check_variants;
++};
++
++static const struct unicam_fmt formats[] = {
++ /* YUV Formats */
++ {
++ .fourcc = V4L2_PIX_FMT_YUYV,
++ .code = MEDIA_BUS_FMT_YUYV8_2X8,
++ .depth = 16,
++ .csi_dt = 0x1e,
++ .check_variants = 1,
++ }, {
++ .fourcc = V4L2_PIX_FMT_UYVY,
++ .code = MEDIA_BUS_FMT_UYVY8_2X8,
++ .depth = 16,
++ .csi_dt = 0x1e,
++ .check_variants = 1,
++ }, {
++ .fourcc = V4L2_PIX_FMT_YVYU,
++ .code = MEDIA_BUS_FMT_YVYU8_2X8,
++ .depth = 16,
++ .csi_dt = 0x1e,
++ .check_variants = 1,
++ }, {
++ .fourcc = V4L2_PIX_FMT_VYUY,
++ .code = MEDIA_BUS_FMT_VYUY8_2X8,
++ .depth = 16,
++ .csi_dt = 0x1e,
++ .check_variants = 1,
++ }, {
++ .fourcc = V4L2_PIX_FMT_YUYV,
++ .code = MEDIA_BUS_FMT_YUYV8_1X16,
++ .depth = 16,
++ .csi_dt = 0x1e,
++ }, {
++ .fourcc = V4L2_PIX_FMT_UYVY,
++ .code = MEDIA_BUS_FMT_UYVY8_1X16,
++ .depth = 16,
++ .csi_dt = 0x1e,
++ }, {
++ .fourcc = V4L2_PIX_FMT_YVYU,
++ .code = MEDIA_BUS_FMT_YVYU8_1X16,
++ .depth = 16,
++ .csi_dt = 0x1e,
++ }, {
++ .fourcc = V4L2_PIX_FMT_VYUY,
++ .code = MEDIA_BUS_FMT_VYUY8_1X16,
++ .depth = 16,
++ .csi_dt = 0x1e,
++ }, {
++ /* RGB Formats */
++ .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
++ .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
++ .depth = 16,
++ .csi_dt = 0x22,
++ }, {
++ .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */
++ .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
++ .depth = 16,
++ .csi_dt = 0x22
++ }, {
++ .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */
++ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
++ .depth = 16,
++ .csi_dt = 0x21,
++ }, {
++ .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */
++ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
++ .depth = 16,
++ .csi_dt = 0x21,
++ }, {
++ .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */
++ .code = MEDIA_BUS_FMT_RGB888_1X24,
++ .depth = 24,
++ .csi_dt = 0x24,
++ }, {
++ .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */
++ .code = MEDIA_BUS_FMT_BGR888_1X24,
++ .depth = 24,
++ .csi_dt = 0x24,
++ }, {
++ .fourcc = V4L2_PIX_FMT_RGB32, /* argb */
++ .code = MEDIA_BUS_FMT_ARGB8888_1X32,
++ .depth = 32,
++ .csi_dt = 0x0,
++ }, {
++ /* Bayer Formats */
++ .fourcc = V4L2_PIX_FMT_SBGGR8,
++ .code = MEDIA_BUS_FMT_SBGGR8_1X8,
++ .depth = 8,
++ .csi_dt = 0x2a,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SGBRG8,
++ .code = MEDIA_BUS_FMT_SGBRG8_1X8,
++ .depth = 8,
++ .csi_dt = 0x2a,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SGRBG8,
++ .code = MEDIA_BUS_FMT_SGRBG8_1X8,
++ .depth = 8,
++ .csi_dt = 0x2a,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SRGGB8,
++ .code = MEDIA_BUS_FMT_SRGGB8_1X8,
++ .depth = 8,
++ .csi_dt = 0x2a,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SBGGR10P,
++ .repacked_fourcc = V4L2_PIX_FMT_SBGGR10,
++ .code = MEDIA_BUS_FMT_SBGGR10_1X10,
++ .depth = 10,
++ .csi_dt = 0x2b,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SGBRG10P,
++ .repacked_fourcc = V4L2_PIX_FMT_SGBRG10,
++ .code = MEDIA_BUS_FMT_SGBRG10_1X10,
++ .depth = 10,
++ .csi_dt = 0x2b,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SGRBG10P,
++ .repacked_fourcc = V4L2_PIX_FMT_SGRBG10,
++ .code = MEDIA_BUS_FMT_SGRBG10_1X10,
++ .depth = 10,
++ .csi_dt = 0x2b,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SRGGB10P,
++ .repacked_fourcc = V4L2_PIX_FMT_SRGGB10,
++ .code = MEDIA_BUS_FMT_SRGGB10_1X10,
++ .depth = 10,
++ .csi_dt = 0x2b,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SBGGR12P,
++ .repacked_fourcc = V4L2_PIX_FMT_SBGGR12,
++ .code = MEDIA_BUS_FMT_SBGGR12_1X12,
++ .depth = 12,
++ .csi_dt = 0x2c,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SGBRG12P,
++ .repacked_fourcc = V4L2_PIX_FMT_SGBRG12,
++ .code = MEDIA_BUS_FMT_SGBRG12_1X12,
++ .depth = 12,
++ .csi_dt = 0x2c,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SGRBG12P,
++ .repacked_fourcc = V4L2_PIX_FMT_SGRBG12,
++ .code = MEDIA_BUS_FMT_SGRBG12_1X12,
++ .depth = 12,
++ .csi_dt = 0x2c,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SRGGB12P,
++ .repacked_fourcc = V4L2_PIX_FMT_SRGGB12,
++ .code = MEDIA_BUS_FMT_SRGGB12_1X12,
++ .depth = 12,
++ .csi_dt = 0x2c,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SBGGR14P,
++ .code = MEDIA_BUS_FMT_SBGGR14_1X14,
++ .depth = 14,
++ .csi_dt = 0x2d,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SGBRG14P,
++ .code = MEDIA_BUS_FMT_SGBRG14_1X14,
++ .depth = 14,
++ .csi_dt = 0x2d,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SGRBG14P,
++ .code = MEDIA_BUS_FMT_SGRBG14_1X14,
++ .depth = 14,
++ .csi_dt = 0x2d,
++ }, {
++ .fourcc = V4L2_PIX_FMT_SRGGB14P,
++ .code = MEDIA_BUS_FMT_SRGGB14_1X14,
++ .depth = 14,
++ .csi_dt = 0x2d,
++ }, {
++ /*
++ * 16 bit Bayer formats could be supported, but there is no CSI2
++ * data_type defined for raw 16, and no sensors that produce it at
++ * present.
++ */
++
++ /* Greyscale formats */
++ .fourcc = V4L2_PIX_FMT_GREY,
++ .code = MEDIA_BUS_FMT_Y8_1X8,
++ .depth = 8,
++ .csi_dt = 0x2a,
++ }, {
++ .fourcc = V4L2_PIX_FMT_Y10P,
++ .repacked_fourcc = V4L2_PIX_FMT_Y10,
++ .code = MEDIA_BUS_FMT_Y10_1X10,
++ .depth = 10,
++ .csi_dt = 0x2b,
++ }, {
++ /* NB There is no packed V4L2 fourcc for this format. */
++ .repacked_fourcc = V4L2_PIX_FMT_Y12,
++ .code = MEDIA_BUS_FMT_Y12_1X12,
++ .depth = 12,
++ .csi_dt = 0x2c,
++ },
++};
++
++struct unicam_dmaqueue {
++ struct list_head active;
++};
++
++struct unicam_buffer {
++ struct vb2_v4l2_buffer vb;
++ struct list_head list;
++};
++
++struct unicam_cfg {
++ /* peripheral base address */
++ void __iomem *base;
++ /* clock gating base address */
++ void __iomem *clk_gate_base;
++};
++
++#define MAX_POSSIBLE_PIX_FMTS (ARRAY_SIZE(formats))
++
++struct unicam_device {
++ /* V4l2 specific parameters */
++ /* Identifies video device for this channel */
++ struct video_device video_dev;
++ struct v4l2_ctrl_handler ctrl_handler;
++
++ struct v4l2_fwnode_endpoint endpoint;
++
++ struct v4l2_async_subdev asd;
++
++ /* unicam cfg */
++ struct unicam_cfg cfg;
++ /* clock handle */
++ struct clk *clock;
++ /* V4l2 device */
++ struct v4l2_device v4l2_dev;
++ struct media_device mdev;
++ struct media_pad pad;
++
++ /* parent device */
++ struct platform_device *pdev;
++ /* subdevice async Notifier */
++ struct v4l2_async_notifier notifier;
++ unsigned int sequence;
++
++ /* ptr to sub device */
++ struct v4l2_subdev *sensor;
++ /* Pad config for the sensor */
++ struct v4l2_subdev_pad_config *sensor_config;
++ /* current input at the sub device */
++ int current_input;
++
++ /* Pointer pointing to current v4l2_buffer */
++ struct unicam_buffer *cur_frm;
++ /* Pointer pointing to next v4l2_buffer */
++ struct unicam_buffer *next_frm;
++
++ /* video capture */
++ const struct unicam_fmt *fmt;
++ /* Used to store current pixel format */
++ struct v4l2_format v_fmt;
++ /* Used to store current mbus frame format */
++ struct v4l2_mbus_framefmt m_fmt;
++
++ unsigned int virtual_channel;
++ enum v4l2_mbus_type bus_type;
++ /*
++ * Stores bus.mipi_csi2.flags for CSI2 sensors, or
++ * bus.mipi_csi1.strobe for CCP2.
++ */
++ unsigned int bus_flags;
++ unsigned int max_data_lanes;
++ unsigned int active_data_lanes;
++
++ struct v4l2_rect crop;
++
++ /* Currently selected input on subdev */
++ int input;
++
++ /* Buffer queue used in video-buf */
++ struct vb2_queue buffer_queue;
++ /* Queue of filled frames */
++ struct unicam_dmaqueue dma_queue;
++ /* IRQ lock for DMA queue */
++ spinlock_t dma_queue_lock;
++ /* lock used to access this structure */
++ struct mutex lock;
++ /* Flag to denote that we are processing buffers */
++ int streaming;
++};
++
++/* Hardware access */
++#define clk_write(dev, val) writel((val) | 0x5a000000, (dev)->clk_gate_base)
++#define clk_read(dev) readl((dev)->clk_gate_base)
++
++#define reg_read(dev, offset) readl((dev)->base + (offset))
++#define reg_write(dev, offset, val) writel(val, (dev)->base + (offset))
++
++#define reg_read_field(dev, offset, mask) get_field(reg_read((dev), (offset), \
++ mask))
++
++static inline int get_field(u32 value, u32 mask)
++{
++ return (value & mask) >> __ffs(mask);
++}
++
++static inline void set_field(u32 *valp, u32 field, u32 mask)
++{
++ u32 val = *valp;
++
++ val &= ~mask;
++ val |= (field << __ffs(mask)) & mask;
++ *valp = val;
++}
++
++static inline void reg_write_field(struct unicam_cfg *dev, u32 offset,
++ u32 field, u32 mask)
++{
++ u32 val = reg_read((dev), (offset));
++
++ set_field(&val, field, mask);
++ reg_write((dev), (offset), val);
++}
++
++/* Power management functions */
++static inline int unicam_runtime_get(struct unicam_device *dev)
++{
++ return pm_runtime_get_sync(&dev->pdev->dev);
++}
++
++static inline void unicam_runtime_put(struct unicam_device *dev)
++{
++ pm_runtime_put_sync(&dev->pdev->dev);
++}
++
++/* Format setup functions */
++static const struct unicam_fmt *find_format_by_code(u32 code)
++{
++ unsigned int i;
++
++ for (i = 0; i < ARRAY_SIZE(formats); i++) {
++ if (formats[i].code == code)
++ return &formats[i];
++ }
++
++ return NULL;
++}
++
++static int check_mbus_format(struct unicam_device *dev,
++ const struct unicam_fmt *format)
++{
++ struct v4l2_subdev_mbus_code_enum mbus_code;
++ int ret = 0;
++ int i;
++
++ for (i = 0; !ret && i < MAX_ENUM_MBUS_CODE; i++) {
++ memset(&mbus_code, 0, sizeof(mbus_code));
++ mbus_code.index = i;
++ mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
++
++ ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code,
++ NULL, &mbus_code);
++
++ if (!ret && mbus_code.code == format->code)
++ return 1;
++ }
++
++ return 0;
++}
++
++static const struct unicam_fmt *find_format_by_pix(struct unicam_device *dev,
++ u32 pixelformat)
++{
++ unsigned int i;
++
++ for (i = 0; i < ARRAY_SIZE(formats); i++) {
++ if (formats[i].fourcc == pixelformat ||
++ formats[i].repacked_fourcc == pixelformat) {
++ if (formats[i].check_variants &&
++ !check_mbus_format(dev, &formats[i]))
++ continue;
++ return &formats[i];
++ }
++ }
++
++ return NULL;
++}
++
++static inline unsigned int bytes_per_line(u32 width,
++ const struct unicam_fmt *fmt,
++ u32 v4l2_fourcc)
++{
++ if (v4l2_fourcc == fmt->repacked_fourcc)
++ /* Repacking always goes to 16bpp */
++ return ALIGN(width << 1, BPL_ALIGNMENT);
++ else
++ return ALIGN((width * fmt->depth) >> 3, BPL_ALIGNMENT);
++}
++
++static int __subdev_get_format(struct unicam_device *dev,
++ struct v4l2_mbus_framefmt *fmt)
++{
++ struct v4l2_subdev_format sd_fmt = {
++ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
++ };
++ int ret;
++
++ ret = v4l2_subdev_call(dev->sensor, pad, get_fmt, dev->sensor_config,
++ &sd_fmt);
++ if (ret < 0)
++ return ret;
++
++ *fmt = sd_fmt.format;
++
++ unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__,
++ fmt->width, fmt->height, fmt->code);
++
++ return 0;
++}
++
++static int __subdev_set_format(struct unicam_device *dev,
++ struct v4l2_mbus_framefmt *fmt)
++{
++ struct v4l2_subdev_format sd_fmt = {
++ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
++ };
++ int ret;
++
++ sd_fmt.format = *fmt;
++
++ ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config,
++ &sd_fmt);
++ if (ret < 0)
++ return ret;
++
++ unicam_dbg(1, dev, "%s %dx%d code:%04x\n", __func__,
++ fmt->width, fmt->height, fmt->code);
++
++ return 0;
++}
++
++static int unicam_calc_format_size_bpl(struct unicam_device *dev,
++ const struct unicam_fmt *fmt,
++ struct v4l2_format *f)
++{
++ unsigned int min_bytesperline;
++
++ v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, MAX_WIDTH, 2,
++ &f->fmt.pix.height, MIN_HEIGHT, MAX_HEIGHT, 0,
++ 0);
++
++ min_bytesperline = bytes_per_line(f->fmt.pix.width, fmt,
++ f->fmt.pix.pixelformat);
++
++ if (f->fmt.pix.bytesperline > min_bytesperline &&
++ f->fmt.pix.bytesperline <= MAX_BYTESPERLINE)
++ f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline,
++ BPL_ALIGNMENT);
++ else
++ f->fmt.pix.bytesperline = min_bytesperline;
++
++ f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
++
++ unicam_dbg(3, dev, "%s: fourcc: %08X size: %dx%d bpl:%d img_size:%d\n",
++ __func__,
++ f->fmt.pix.pixelformat,
++ f->fmt.pix.width, f->fmt.pix.height,
++ f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
++
++ return 0;
++}
++
++static int unicam_reset_format(struct unicam_device *dev)
++{
++ struct v4l2_mbus_framefmt mbus_fmt;
++ int ret;
++
++ ret = __subdev_get_format(dev, &mbus_fmt);
++ if (ret) {
++ unicam_err(dev, "Failed to get_format - ret %d\n", ret);
++ return ret;
++ }
++
++ if (mbus_fmt.code != dev->fmt->code) {
++ unicam_err(dev, "code mismatch - fmt->code %08x, mbus_fmt.code %08x\n",
++ dev->fmt->code, mbus_fmt.code);
++ return ret;
++ }
++
++ v4l2_fill_pix_format(&dev->v_fmt.fmt.pix, &mbus_fmt);
++ dev->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
++
++ unicam_calc_format_size_bpl(dev, dev->fmt, &dev->v_fmt);
++
++ dev->m_fmt = mbus_fmt;
++
++ return 0;
++}
++
++static void unicam_wr_dma_addr(struct unicam_device *dev, dma_addr_t dmaaddr)
++{
++ /*
++ * dmaaddr should be a 32-bit address with the top two bits set to 0x3
++ * to signify uncached access through the Videocore memory controller.
++ */
++ BUG_ON((dmaaddr >> 30) != 0x3);
++
++ reg_write(&dev->cfg, UNICAM_IBSA0, dmaaddr);
++ reg_write(&dev->cfg, UNICAM_IBEA0,
++ dmaaddr + dev->v_fmt.fmt.pix.sizeimage);
++}
++
++static inline unsigned int unicam_get_lines_done(struct unicam_device *dev)
++{
++ dma_addr_t start_addr, cur_addr;
++ unsigned int stride = dev->v_fmt.fmt.pix.bytesperline;
++ struct unicam_buffer *frm = dev->cur_frm;
++
++ if (!frm)
++ return 0;
++
++ start_addr = vb2_dma_contig_plane_dma_addr(&frm->vb.vb2_buf, 0);
++ cur_addr = reg_read(&dev->cfg, UNICAM_IBWP);
++ return (unsigned int)(cur_addr - start_addr) / stride;
++}
++
++static inline void unicam_schedule_next_buffer(struct unicam_device *dev)
++{
++ struct unicam_dmaqueue *dma_q = &dev->dma_queue;
++ struct unicam_buffer *buf;
++ dma_addr_t addr;
++
++ buf = list_entry(dma_q->active.next, struct unicam_buffer, list);
++ dev->next_frm = buf;
++ list_del(&buf->list);
++
++ addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
++ unicam_wr_dma_addr(dev, addr);
++}
++
++static inline void unicam_process_buffer_complete(struct unicam_device *dev)
++{
++ dev->cur_frm->vb.field = dev->m_fmt.field;
++ dev->cur_frm->vb.sequence = dev->sequence++;
++
++ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE);
++ dev->cur_frm = dev->next_frm;
++}
++
++/*
++ * unicam_isr : ISR handler for unicam capture
++ * @irq: irq number
++ * @dev_id: dev_id ptr
++ *
++ * It changes status of the captured buffer, takes next buffer from the queue
++ * and sets its address in unicam registers
++ */
++static irqreturn_t unicam_isr(int irq, void *dev)
++{
++ struct unicam_device *unicam = (struct unicam_device *)dev;
++ struct unicam_cfg *cfg = &unicam->cfg;
++ struct unicam_dmaqueue *dma_q = &unicam->dma_queue;
++ unsigned int lines_done = unicam_get_lines_done(dev);
++ unsigned int sequence = unicam->sequence;
++ int ista, sta;
++
++ /*
++ * Don't service interrupts if not streaming.
++ * Avoids issues if the VPU should enable the
++ * peripheral without the kernel knowing (that
++ * shouldn't happen, but causes issues if it does).
++ */
++ if (!unicam->streaming)
++ return IRQ_HANDLED;
++
++ sta = reg_read(cfg, UNICAM_STA);
++ /* Write value back to clear the interrupts */
++ reg_write(cfg, UNICAM_STA, sta);
++
++ ista = reg_read(cfg, UNICAM_ISTA);
++ /* Write value back to clear the interrupts */
++ reg_write(cfg, UNICAM_ISTA, ista);
++
++ unicam_dbg(3, unicam, "ISR: ISTA: 0x%X, STA: 0x%X, sequence %d, lines done %d",
++ ista, sta, sequence, lines_done);
++
++ if (!(sta && (UNICAM_IS | UNICAM_PI0)))
++ return IRQ_HANDLED;
++
++ if (ista & UNICAM_FSI) {
++ /*
++ * Timestamp is to be when the first data byte was captured,
++ * aka frame start.
++ */
++ if (unicam->cur_frm)
++ unicam->cur_frm->vb.vb2_buf.timestamp = ktime_get_ns();
++ }
++ if (ista & UNICAM_FEI || sta & UNICAM_PI0) {
++ /*
++ * Ensure we have swapped buffers already as we can't
++ * stop the peripheral. Overwrite the frame we've just
++ * captured instead.
++ */
++ if (unicam->cur_frm && unicam->cur_frm != unicam->next_frm)
++ unicam_process_buffer_complete(unicam);
++ }
++
++ /* Cannot swap buffer at frame end, there may be a race condition
++ * where the HW does not actually swap it if the new frame has
++ * already started.
++ */
++ if (ista & (UNICAM_FSI | UNICAM_LCI) && !(ista & UNICAM_FEI)) {
++ spin_lock(&unicam->dma_queue_lock);
++ if (!list_empty(&dma_q->active) &&
++ unicam->cur_frm == unicam->next_frm)
++ unicam_schedule_next_buffer(unicam);
++ spin_unlock(&unicam->dma_queue_lock);
++ }
++
++ if (reg_read(&unicam->cfg, UNICAM_ICTL) & UNICAM_FCM) {
++ /* Switch out of trigger mode if selected */
++ reg_write_field(&unicam->cfg, UNICAM_ICTL, 1, UNICAM_TFC);
++ reg_write_field(&unicam->cfg, UNICAM_ICTL, 0, UNICAM_FCM);
++ }
++ return IRQ_HANDLED;
++}
++
++static int unicam_querycap(struct file *file, void *priv,
++ struct v4l2_capability *cap)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ strlcpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver));
++ strlcpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card));
++
++ snprintf(cap->bus_info, sizeof(cap->bus_info),
++ "platform:%s", dev->v4l2_dev.name);
++
++ return 0;
++}
++
++static int unicam_enum_fmt_vid_cap(struct file *file, void *priv,
++ struct v4l2_fmtdesc *f)
++{
++ struct unicam_device *dev = video_drvdata(file);
++ struct v4l2_subdev_mbus_code_enum mbus_code;
++ const struct unicam_fmt *fmt = NULL;
++ int index = 0;
++ int ret = 0;
++ int i;
++
++ for (i = 0; !ret && i < MAX_ENUM_MBUS_CODE; i++) {
++ memset(&mbus_code, 0, sizeof(mbus_code));
++ mbus_code.index = i;
++
++ ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code,
++ NULL, &mbus_code);
++ if (ret < 0) {
++ unicam_dbg(2, dev,
++ "subdev->enum_mbus_code idx %d returned %d - index invalid\n",
++ i, ret);
++ return -EINVAL;
++ }
++
++ fmt = find_format_by_code(mbus_code.code);
++ if (fmt) {
++ if (fmt->fourcc) {
++ if (index == f->index) {
++ f->pixelformat = fmt->fourcc;
++ break;
++ }
++ index++;
++ }
++ if (fmt->repacked_fourcc) {
++ if (index == f->index) {
++ f->pixelformat = fmt->repacked_fourcc;
++ break;
++ }
++ index++;
++ }
++ }
++ }
++
++ return 0;
++}
++
++static int unicam_g_fmt_vid_cap(struct file *file, void *priv,
++ struct v4l2_format *f)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ *f = dev->v_fmt;
++
++ return 0;
++}
++
++static
++const struct unicam_fmt *get_first_supported_format(struct unicam_device *dev)
++{
++ struct v4l2_subdev_mbus_code_enum mbus_code;
++ const struct unicam_fmt *fmt = NULL;
++ int ret;
++ int j;
++
++ for (j = 0; ret != -EINVAL && ret != -ENOIOCTLCMD; ++j) {
++ memset(&mbus_code, 0, sizeof(mbus_code));
++ mbus_code.index = j;
++ ret = v4l2_subdev_call(dev->sensor, pad, enum_mbus_code, NULL,
++ &mbus_code);
++ if (ret < 0) {
++ unicam_dbg(2, dev,
++ "subdev->enum_mbus_code idx %d returned %d - continue\n",
++ j, ret);
++ continue;
++ }
++
++ unicam_dbg(2, dev, "subdev %s: code: 0x%08x idx: %d\n",
++ dev->sensor->name, mbus_code.code, j);
++
++ fmt = find_format_by_code(mbus_code.code);
++ unicam_dbg(2, dev, "fmt 0x%08x returned as %p, V4L2 FOURCC 0x%08x, csi_dt 0x%02x\n",
++ mbus_code.code, fmt, fmt ? fmt->fourcc : 0,
++ fmt ? fmt->csi_dt : 0);
++ if (fmt)
++ return fmt;
++ }
++
++ return NULL;
++}
++
++static int unicam_try_fmt_vid_cap(struct file *file, void *priv,
++ struct v4l2_format *f)
++{
++ struct unicam_device *dev = video_drvdata(file);
++ struct v4l2_subdev_format sd_fmt = {
++ .which = V4L2_SUBDEV_FORMAT_TRY,
++ };
++ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
++ const struct unicam_fmt *fmt;
++ int ret;
++
++ fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat);
++ if (!fmt) {
++ /* Pixel format not supported by unicam. Choose the first
++ * supported format, and let the sensor choose something else.
++ */
++ unicam_dbg(3, dev, "Fourcc format (0x%08x) not found. Use first format.\n",
++ f->fmt.pix.pixelformat);
++
++ fmt = &formats[0];
++ f->fmt.pix.pixelformat = fmt->fourcc;
++ }
++
++ v4l2_fill_mbus_format(mbus_fmt, &f->fmt.pix, fmt->code);
++ /*
++ * No support for receiving interlaced video, so never
++ * request it from the sensor subdev.
++ */
++ mbus_fmt->field = V4L2_FIELD_NONE;
++
++ ret = v4l2_subdev_call(dev->sensor, pad, set_fmt, dev->sensor_config,
++ &sd_fmt);
++ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
++ return ret;
++
++ if (mbus_fmt->field != V4L2_FIELD_NONE)
++ unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n");
++
++ v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format);
++ if (mbus_fmt->code != fmt->code) {
++ /* Sensor has returned an alternate format */
++ fmt = find_format_by_code(mbus_fmt->code);
++ if (!fmt) {
++ /* The alternate format is one unicam can't support.
++ * Find the first format that is supported by both, and
++ * then set that.
++ */
++ fmt = get_first_supported_format(dev);
++ mbus_fmt->code = fmt->code;
++
++ ret = v4l2_subdev_call(dev->sensor, pad, set_fmt,
++ dev->sensor_config, &sd_fmt);
++ if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
++ return ret;
++
++ if (mbus_fmt->field != V4L2_FIELD_NONE)
++ unicam_info(dev, "Sensor trying to send interlaced video - results may be unpredictable\n");
++
++ v4l2_fill_pix_format(&f->fmt.pix, &sd_fmt.format);
++
++ if (mbus_fmt->code != fmt->code) {
++ /* We've set a format that the sensor reports
++ * as being supported, but it refuses to set it.
++ * Not much else we can do.
++ * Assume that the sensor driver may accept the
++ * format when it is set (rather than tried).
++ */
++ unicam_err(dev, "Sensor won't accept default format, and Unicam can't support sensor default\n");
++ }
++ }
++
++ if (fmt->fourcc)
++ f->fmt.pix.pixelformat = fmt->fourcc;
++ else
++ f->fmt.pix.pixelformat = fmt->repacked_fourcc;
++ }
++
++ return unicam_calc_format_size_bpl(dev, fmt, f);
++}
++
++static int unicam_s_fmt_vid_cap(struct file *file, void *priv,
++ struct v4l2_format *f)
++{
++ struct unicam_device *dev = video_drvdata(file);
++ struct vb2_queue *q = &dev->buffer_queue;
++ struct v4l2_mbus_framefmt mbus_fmt = {0};
++ const struct unicam_fmt *fmt;
++ int ret;
++
++ if (vb2_is_busy(q))
++ return -EBUSY;
++
++ ret = unicam_try_fmt_vid_cap(file, priv, f);
++ if (ret < 0)
++ return ret;
++
++ fmt = find_format_by_pix(dev, f->fmt.pix.pixelformat);
++ if (!fmt) {
++ /* Unknown pixel format - adopt a default.
++ * This shouldn't happen as try_fmt should have resolved any
++ * issues first.
++ */
++ fmt = get_first_supported_format(dev);
++ if (!fmt)
++ /* It shouldn't be possible to get here with no
++ * supported formats
++ */
++ return -EINVAL;
++ f->fmt.pix.pixelformat = fmt->fourcc;
++ return -EINVAL;
++ }
++
++ v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, fmt->code);
++
++ ret = __subdev_set_format(dev, &mbus_fmt);
++ if (ret) {
++ unicam_dbg(3, dev, "%s __subdev_set_format failed %d\n",
++ __func__, ret);
++ return ret;
++ }
++
++ /* Just double check nothing has gone wrong */
++ if (mbus_fmt.code != fmt->code) {
++ unicam_dbg(3, dev,
++ "%s subdev changed format on us, this should not happen\n",
++ __func__);
++ return -EINVAL;
++ }
++
++ dev->fmt = fmt;
++ dev->v_fmt.fmt.pix.pixelformat = f->fmt.pix.pixelformat;
++ dev->v_fmt.fmt.pix.bytesperline = f->fmt.pix.bytesperline;
++ unicam_reset_format(dev);
++
++ unicam_dbg(3, dev, "%s %dx%d, mbus_fmt 0x%08X, V4L2 pix 0x%08X.\n",
++ __func__, dev->v_fmt.fmt.pix.width,
++ dev->v_fmt.fmt.pix.height, mbus_fmt.code,
++ dev->v_fmt.fmt.pix.pixelformat);
++
++ *f = dev->v_fmt;
++
++ return 0;
++}
++
++static int unicam_queue_setup(struct vb2_queue *vq,
++ unsigned int *nbuffers,
++ unsigned int *nplanes,
++ unsigned int sizes[],
++ struct device *alloc_devs[])
++{
++ struct unicam_device *dev = vb2_get_drv_priv(vq);
++ unsigned int size = dev->v_fmt.fmt.pix.sizeimage;
++
++ if (vq->num_buffers + *nbuffers < 3)
++ *nbuffers = 3 - vq->num_buffers;
++
++ if (*nplanes) {
++ if (sizes[0] < size) {
++ unicam_err(dev, "sizes[0] %i < size %u\n", sizes[0],
++ size);
++ return -EINVAL;
++ }
++ size = sizes[0];
++ }
++
++ *nplanes = 1;
++ sizes[0] = size;
++
++ return 0;
++}
++
++static int unicam_buffer_prepare(struct vb2_buffer *vb)
++{
++ struct unicam_device *dev = vb2_get_drv_priv(vb->vb2_queue);
++ struct unicam_buffer *buf = container_of(vb, struct unicam_buffer,
++ vb.vb2_buf);
++ unsigned long size;
++
++ if (WARN_ON(!dev->fmt))
++ return -EINVAL;
++
++ size = dev->v_fmt.fmt.pix.sizeimage;
++ if (vb2_plane_size(vb, 0) < size) {
++ unicam_err(dev, "data will not fit into plane (%lu < %lu)\n",
++ vb2_plane_size(vb, 0), size);
++ return -EINVAL;
++ }
++
++ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
++ return 0;
++}
++
++static void unicam_buffer_queue(struct vb2_buffer *vb)
++{
++ struct unicam_device *dev = vb2_get_drv_priv(vb->vb2_queue);
++ struct unicam_buffer *buf = container_of(vb, struct unicam_buffer,
++ vb.vb2_buf);
++ struct unicam_dmaqueue *dma_queue = &dev->dma_queue;
++ unsigned long flags = 0;
++
++ spin_lock_irqsave(&dev->dma_queue_lock, flags);
++ list_add_tail(&buf->list, &dma_queue->active);
++ spin_unlock_irqrestore(&dev->dma_queue_lock, flags);
++}
++
++static void unicam_set_packing_config(struct unicam_device *dev)
++{
++ int pack, unpack;
++ u32 val;
++
++ if (dev->v_fmt.fmt.pix.pixelformat == dev->fmt->fourcc) {
++ unpack = UNICAM_PUM_NONE;
++ pack = UNICAM_PPM_NONE;
++ } else {
++ switch (dev->fmt->depth) {
++ case 8:
++ unpack = UNICAM_PUM_UNPACK8;
++ break;
++ case 10:
++ unpack = UNICAM_PUM_UNPACK10;
++ break;
++ case 12:
++ unpack = UNICAM_PUM_UNPACK12;
++ break;
++ case 14:
++ unpack = UNICAM_PUM_UNPACK14;
++ break;
++ case 16:
++ unpack = UNICAM_PUM_UNPACK16;
++ break;
++ default:
++ unpack = UNICAM_PUM_NONE;
++ break;
++ }
++
++ /* Repacking is always to 16bpp */
++ pack = UNICAM_PPM_PACK16;
++ }
++
++ val = 0;
++ set_field(&val, unpack, UNICAM_PUM_MASK);
++ set_field(&val, pack, UNICAM_PPM_MASK);
++ reg_write(&dev->cfg, UNICAM_IPIPE, val);
++}
++
++static void unicam_cfg_image_id(struct unicam_device *dev)
++{
++ struct unicam_cfg *cfg = &dev->cfg;
++
++ if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
++ /* CSI2 mode */
++ reg_write(cfg, UNICAM_IDI0,
++ (dev->virtual_channel << 6) | dev->fmt->csi_dt);
++ } else {
++ /* CCP2 mode */
++ reg_write(cfg, UNICAM_IDI0, (0x80 | dev->fmt->csi_dt));
++ }
++}
++
++static void unicam_start_rx(struct unicam_device *dev, unsigned long addr)
++{
++ struct unicam_cfg *cfg = &dev->cfg;
++ int line_int_freq = dev->v_fmt.fmt.pix.height >> 2;
++ unsigned int i;
++ u32 val;
++
++ if (line_int_freq < 128)
++ line_int_freq = 128;
++
++ /* Enable lane clocks */
++ val = 1;
++ for (i = 0; i < dev->active_data_lanes; i++)
++ val = val << 2 | 1;
++ clk_write(cfg, val);
++
++ /* Basic init */
++ reg_write(cfg, UNICAM_CTRL, UNICAM_MEM);
++
++ /* Enable analogue control, and leave in reset. */
++ val = UNICAM_AR;
++ set_field(&val, 7, UNICAM_CTATADJ_MASK);
++ set_field(&val, 7, UNICAM_PTATADJ_MASK);
++ reg_write(cfg, UNICAM_ANA, val);
++ usleep_range(1000, 2000);
++
++ /* Come out of reset */
++ reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_AR);
++
++ /* Peripheral reset */
++ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR);
++ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR);
++
++ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE);
++
++ /* Enable Rx control. */
++ val = reg_read(cfg, UNICAM_CTRL);
++ if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
++ set_field(&val, UNICAM_CPM_CSI2, UNICAM_CPM_MASK);
++ set_field(&val, UNICAM_DCM_STROBE, UNICAM_DCM_MASK);
++ } else {
++ set_field(&val, UNICAM_CPM_CCP2, UNICAM_CPM_MASK);
++ set_field(&val, dev->bus_flags, UNICAM_DCM_MASK);
++ }
++ /* Packet framer timeout */
++ set_field(&val, 0xf, UNICAM_PFT_MASK);
++ set_field(&val, 128, UNICAM_OET_MASK);
++ reg_write(cfg, UNICAM_CTRL, val);
++
++ reg_write(cfg, UNICAM_IHWIN, 0);
++ reg_write(cfg, UNICAM_IVWIN, 0);
++
++ /* AXI bus access QoS setup */
++ val = reg_read(&dev->cfg, UNICAM_PRI);
++ set_field(&val, 0, UNICAM_BL_MASK);
++ set_field(&val, 0, UNICAM_BS_MASK);
++ set_field(&val, 0xe, UNICAM_PP_MASK);
++ set_field(&val, 8, UNICAM_NP_MASK);
++ set_field(&val, 2, UNICAM_PT_MASK);
++ set_field(&val, 1, UNICAM_PE);
++ reg_write(cfg, UNICAM_PRI, val);
++
++ reg_write_field(cfg, UNICAM_ANA, 0, UNICAM_DDL);
++
++ /* Always start in trigger frame capture mode (UNICAM_FCM set) */
++ val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM;
++ set_field(&val, line_int_freq, UNICAM_LCIE_MASK);
++ reg_write(cfg, UNICAM_ICTL, val);
++ reg_write(cfg, UNICAM_STA, UNICAM_STA_MASK_ALL);
++ reg_write(cfg, UNICAM_ISTA, UNICAM_ISTA_MASK_ALL);
++
++ /* tclk_term_en */
++ reg_write_field(cfg, UNICAM_CLT, 2, UNICAM_CLT1_MASK);
++ /* tclk_settle */
++ reg_write_field(cfg, UNICAM_CLT, 6, UNICAM_CLT2_MASK);
++ /* td_term_en */
++ reg_write_field(cfg, UNICAM_DLT, 2, UNICAM_DLT1_MASK);
++ /* ths_settle */
++ reg_write_field(cfg, UNICAM_DLT, 6, UNICAM_DLT2_MASK);
++ /* trx_enable */
++ reg_write_field(cfg, UNICAM_DLT, 0, UNICAM_DLT3_MASK);
++
++ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_SOE);
++
++ /* Packet compare setup - required to avoid missing frame ends */
++ val = 0;
++ set_field(&val, 1, UNICAM_PCE);
++ set_field(&val, 1, UNICAM_GI);
++ set_field(&val, 1, UNICAM_CPH);
++ set_field(&val, 0, UNICAM_PCVC_MASK);
++ set_field(&val, 1, UNICAM_PCDT_MASK);
++ reg_write(cfg, UNICAM_CMP0, val);
++
++ /* Enable clock lane and set up terminations */
++ val = 0;
++ if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
++ /* CSI2 */
++ set_field(&val, 1, UNICAM_CLE);
++ set_field(&val, 1, UNICAM_CLLPE);
++ if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) {
++ set_field(&val, 1, UNICAM_CLTRE);
++ set_field(&val, 1, UNICAM_CLHSE);
++ }
++ } else {
++ /* CCP2 */
++ set_field(&val, 1, UNICAM_CLE);
++ set_field(&val, 1, UNICAM_CLHSE);
++ set_field(&val, 1, UNICAM_CLTRE);
++ }
++ reg_write(cfg, UNICAM_CLK, val);
++
++ /*
++ * Enable required data lanes with appropriate terminations.
++ * The same value needs to be written to UNICAM_DATn registers for
++ * the active lanes, and 0 for inactive ones.
++ */
++ val = 0;
++ if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) {
++ /* CSI2 */
++ set_field(&val, 1, UNICAM_DLE);
++ set_field(&val, 1, UNICAM_DLLPE);
++ if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) {
++ set_field(&val, 1, UNICAM_DLTRE);
++ set_field(&val, 1, UNICAM_DLHSE);
++ }
++ } else {
++ /* CCP2 */
++ set_field(&val, 1, UNICAM_DLE);
++ set_field(&val, 1, UNICAM_DLHSE);
++ set_field(&val, 1, UNICAM_DLTRE);
++ }
++ reg_write(cfg, UNICAM_DAT0, val);
++
++ if (dev->active_data_lanes == 1)
++ val = 0;
++ reg_write(cfg, UNICAM_DAT1, val);
++
++ if (dev->max_data_lanes > 2) {
++ /*
++ * Registers UNICAM_DAT2 and UNICAM_DAT3 only valid if the
++ * instance supports more than 2 data lanes.
++ */
++ if (dev->active_data_lanes == 2)
++ val = 0;
++ reg_write(cfg, UNICAM_DAT2, val);
++
++ if (dev->active_data_lanes == 3)
++ val = 0;
++ reg_write(cfg, UNICAM_DAT3, val);
++ }
++
++ reg_write(&dev->cfg, UNICAM_IBLS, dev->v_fmt.fmt.pix.bytesperline);
++ unicam_wr_dma_addr(dev, addr);
++ unicam_set_packing_config(dev);
++ unicam_cfg_image_id(dev);
++
++ /* Disabled embedded data */
++ val = 0;
++ set_field(&val, 0, UNICAM_EDL_MASK);
++ reg_write(cfg, UNICAM_DCS, val);
++
++ val = reg_read(cfg, UNICAM_MISC);
++ set_field(&val, 1, UNICAM_FL0);
++ set_field(&val, 1, UNICAM_FL1);
++ reg_write(cfg, UNICAM_MISC, val);
++
++ /* Enable peripheral */
++ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPE);
++
++ /* Load image pointers */
++ reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_LIP_MASK);
++
++ /*
++ * Enable trigger only for the first frame to
++ * sync correctly to the FS from the source.
++ */
++ reg_write_field(cfg, UNICAM_ICTL, 1, UNICAM_TFC);
++}
++
++static void unicam_disable(struct unicam_device *dev)
++{
++ struct unicam_cfg *cfg = &dev->cfg;
++
++ /* Analogue lane control disable */
++ reg_write_field(cfg, UNICAM_ANA, 1, UNICAM_DDL);
++
++ /* Stop the output engine */
++ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_SOE);
++
++ /* Disable the data lanes. */
++ reg_write(cfg, UNICAM_DAT0, 0);
++ reg_write(cfg, UNICAM_DAT1, 0);
++
++ if (dev->max_data_lanes > 2) {
++ reg_write(cfg, UNICAM_DAT2, 0);
++ reg_write(cfg, UNICAM_DAT3, 0);
++ }
++
++ /* Peripheral reset */
++ reg_write_field(cfg, UNICAM_CTRL, 1, UNICAM_CPR);
++ usleep_range(50, 100);
++ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPR);
++
++ /* Disable peripheral */
++ reg_write_field(cfg, UNICAM_CTRL, 0, UNICAM_CPE);
++
++ /* Disable all lane clocks */
++ clk_write(cfg, 0);
++}
++
++static int unicam_start_streaming(struct vb2_queue *vq, unsigned int count)
++{
++ struct unicam_device *dev = vb2_get_drv_priv(vq);
++ struct unicam_dmaqueue *dma_q = &dev->dma_queue;
++ struct unicam_buffer *buf, *tmp;
++ unsigned long addr = 0;
++ unsigned long flags;
++ int ret;
++
++ spin_lock_irqsave(&dev->dma_queue_lock, flags);
++ buf = list_entry(dma_q->active.next, struct unicam_buffer, list);
++ dev->cur_frm = buf;
++ dev->next_frm = buf;
++ list_del(&buf->list);
++ spin_unlock_irqrestore(&dev->dma_queue_lock, flags);
++
++ addr = vb2_dma_contig_plane_dma_addr(&dev->cur_frm->vb.vb2_buf, 0);
++ dev->sequence = 0;
++
++ ret = unicam_runtime_get(dev);
++ if (ret < 0) {
++ unicam_dbg(3, dev, "unicam_runtime_get failed\n");
++ goto err_release_buffers;
++ }
++
++ dev->active_data_lanes = dev->max_data_lanes;
++ if (dev->bus_type == V4L2_MBUS_CSI2_DPHY &&
++ v4l2_subdev_has_op(dev->sensor, video, g_mbus_config)) {
++ struct v4l2_mbus_config mbus_config;
++
++ ret = v4l2_subdev_call(dev->sensor, video, g_mbus_config,
++ &mbus_config);
++ if (ret < 0) {
++ unicam_dbg(3, dev, "g_mbus_config failed\n");
++ goto err_pm_put;
++ }
++
++ dev->active_data_lanes =
++ (mbus_config.flags & V4L2_MBUS_CSI2_LANE_MASK) >>
++ __ffs(V4L2_MBUS_CSI2_LANE_MASK);
++ if (!dev->active_data_lanes)
++ dev->active_data_lanes = dev->max_data_lanes;
++ }
++ if (dev->active_data_lanes > dev->max_data_lanes) {
++ unicam_err(dev, "Device has requested %u data lanes, which is >%u configured in DT\n",
++ dev->active_data_lanes, dev->max_data_lanes);
++ ret = -EINVAL;
++ goto err_pm_put;
++ }
++
++ unicam_dbg(1, dev, "Running with %u data lanes\n",
++ dev->active_data_lanes);
++
++ ret = clk_set_rate(dev->clock, 100 * 1000 * 1000);
++ if (ret) {
++ unicam_err(dev, "failed to set up clock\n");
++ goto err_pm_put;
++ }
++
++ ret = clk_prepare_enable(dev->clock);
++ if (ret) {
++ unicam_err(dev, "Failed to enable CSI clock: %d\n", ret);
++ goto err_pm_put;
++ }
++ dev->streaming = 1;
++
++ unicam_start_rx(dev, addr);
++
++ ret = v4l2_subdev_call(dev->sensor, video, s_stream, 1);
++ if (ret < 0) {
++ unicam_err(dev, "stream on failed in subdev\n");
++ goto err_disable_unicam;
++ }
++
++ return 0;
++
++err_disable_unicam:
++ unicam_disable(dev);
++ clk_disable_unprepare(dev->clock);
++err_pm_put:
++ unicam_runtime_put(dev);
++err_release_buffers:
++ list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
++ list_del(&buf->list);
++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
++ }
++ if (dev->cur_frm != dev->next_frm)
++ vb2_buffer_done(&dev->next_frm->vb.vb2_buf,
++ VB2_BUF_STATE_QUEUED);
++ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
++ dev->next_frm = NULL;
++ dev->cur_frm = NULL;
++
++ return ret;
++}
++
++static void unicam_stop_streaming(struct vb2_queue *vq)
++{
++ struct unicam_device *dev = vb2_get_drv_priv(vq);
++ struct unicam_dmaqueue *dma_q = &dev->dma_queue;
++ struct unicam_buffer *buf, *tmp;
++ unsigned long flags;
++
++ if (v4l2_subdev_call(dev->sensor, video, s_stream, 0) < 0)
++ unicam_err(dev, "stream off failed in subdev\n");
++
++ unicam_disable(dev);
++
++ /* Release all active buffers */
++ spin_lock_irqsave(&dev->dma_queue_lock, flags);
++ list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
++ list_del(&buf->list);
++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
++ }
++
++ if (dev->cur_frm == dev->next_frm) {
++ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR);
++ } else {
++ vb2_buffer_done(&dev->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR);
++ vb2_buffer_done(&dev->next_frm->vb.vb2_buf,
++ VB2_BUF_STATE_ERROR);
++ }
++ dev->cur_frm = NULL;
++ dev->next_frm = NULL;
++ spin_unlock_irqrestore(&dev->dma_queue_lock, flags);
++
++ clk_disable_unprepare(dev->clock);
++ unicam_runtime_put(dev);
++}
++
++static int unicam_enum_input(struct file *file, void *priv,
++ struct v4l2_input *inp)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ if (inp->index != 0)
++ return -EINVAL;
++
++ inp->type = V4L2_INPUT_TYPE_CAMERA;
++ if (v4l2_subdev_has_op(dev->sensor, video, s_dv_timings)) {
++ inp->capabilities = V4L2_IN_CAP_DV_TIMINGS;
++ inp->std = 0;
++ } else if (v4l2_subdev_has_op(dev->sensor, video, s_std)) {
++ inp->capabilities = V4L2_IN_CAP_STD;
++ if (v4l2_subdev_call(dev->sensor, video, g_tvnorms, &inp->std)
++ < 0)
++ inp->std = V4L2_STD_ALL;
++ } else {
++ inp->capabilities = 0;
++ inp->std = 0;
++ }
++ sprintf(inp->name, "Camera 0");
++ return 0;
++}
++
++static int unicam_g_input(struct file *file, void *priv, unsigned int *i)
++{
++ *i = 0;
++
++ return 0;
++}
++
++static int unicam_s_input(struct file *file, void *priv, unsigned int i)
++{
++ /*
++ * FIXME: Ideally we would like to be able to query the source
++ * subdevice for information over the input connectors it supports,
++ * and map that through in to a call to video_ops->s_routing.
++ * There is no infrastructure support for defining that within
++ * devicetree at present. Until that is implemented we can't
++ * map a user physical connector number to s_routing input number.
++ */
++ if (i > 0)
++ return -EINVAL;
++
++ return 0;
++}
++
++static int unicam_querystd(struct file *file, void *priv,
++ v4l2_std_id *std)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ return v4l2_subdev_call(dev->sensor, video, querystd, std);
++}
++
++static int unicam_g_std(struct file *file, void *priv, v4l2_std_id *std)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ return v4l2_subdev_call(dev->sensor, video, g_std, std);
++}
++
++static int unicam_s_std(struct file *file, void *priv, v4l2_std_id std)
++{
++ struct unicam_device *dev = video_drvdata(file);
++ int ret;
++ v4l2_std_id current_std;
++
++ ret = v4l2_subdev_call(dev->sensor, video, g_std, &current_std);
++ if (ret)
++ return ret;
++
++ if (std == current_std)
++ return 0;
++
++ if (vb2_is_busy(&dev->buffer_queue))
++ return -EBUSY;
++
++ ret = v4l2_subdev_call(dev->sensor, video, s_std, std);
++
++ /* Force recomputation of bytesperline */
++ dev->v_fmt.fmt.pix.bytesperline = 0;
++
++ unicam_reset_format(dev);
++
++ return ret;
++}
++
++static int unicam_s_edid(struct file *file, void *priv, struct v4l2_edid *edid)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ return v4l2_subdev_call(dev->sensor, pad, set_edid, edid);
++}
++
++static int unicam_g_edid(struct file *file, void *priv, struct v4l2_edid *edid)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ return v4l2_subdev_call(dev->sensor, pad, get_edid, edid);
++}
++
++static int unicam_enum_framesizes(struct file *file, void *priv,
++ struct v4l2_frmsizeenum *fsize)
++{
++ struct unicam_device *dev = video_drvdata(file);
++ const struct unicam_fmt *fmt;
++ struct v4l2_subdev_frame_size_enum fse;
++ int ret;
++
++ /* check for valid format */
++ fmt = find_format_by_pix(dev, fsize->pixel_format);
++ if (!fmt) {
++ unicam_dbg(3, dev, "Invalid pixel code: %x\n",
++ fsize->pixel_format);
++ return -EINVAL;
++ }
++
++ fse.index = fsize->index;
++ fse.pad = 0;
++ fse.code = fmt->code;
++
++ ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_size, NULL, &fse);
++ if (ret)
++ return ret;
++
++ unicam_dbg(1, dev, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
++ __func__, fse.index, fse.code, fse.min_width, fse.max_width,
++ fse.min_height, fse.max_height);
++
++ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
++ fsize->discrete.width = fse.max_width;
++ fsize->discrete.height = fse.max_height;
++
++ return 0;
++}
++
++static int unicam_enum_frameintervals(struct file *file, void *priv,
++ struct v4l2_frmivalenum *fival)
++{
++ struct unicam_device *dev = video_drvdata(file);
++ const struct unicam_fmt *fmt;
++ struct v4l2_subdev_frame_interval_enum fie = {
++ .index = fival->index,
++ .width = fival->width,
++ .height = fival->height,
++ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
++ };
++ int ret;
++
++ fmt = find_format_by_pix(dev, fival->pixel_format);
++ if (!fmt)
++ return -EINVAL;
++
++ fie.code = fmt->code;
++ ret = v4l2_subdev_call(dev->sensor, pad, enum_frame_interval,
++ NULL, &fie);
++ if (ret)
++ return ret;
++
++ fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
++ fival->discrete = fie.interval;
++
++ return 0;
++}
++
++static int unicam_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ return v4l2_g_parm_cap(video_devdata(file), dev->sensor, a);
++}
++
++static int unicam_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ return v4l2_s_parm_cap(video_devdata(file), dev->sensor, a);
++}
++
++static int unicam_g_dv_timings(struct file *file, void *priv,
++ struct v4l2_dv_timings *timings)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ return v4l2_subdev_call(dev->sensor, video, g_dv_timings, timings);
++}
++
++static int unicam_s_dv_timings(struct file *file, void *priv,
++ struct v4l2_dv_timings *timings)
++{
++ struct unicam_device *dev = video_drvdata(file);
++ struct v4l2_dv_timings current_timings;
++ int ret;
++
++ ret = v4l2_subdev_call(dev->sensor, video, g_dv_timings,
++ &current_timings);
++
++ if (v4l2_match_dv_timings(timings, &current_timings, 0, false))
++ return 0;
++
++ if (vb2_is_busy(&dev->buffer_queue))
++ return -EBUSY;
++
++ ret = v4l2_subdev_call(dev->sensor, video, s_dv_timings, timings);
++
++ /* Force recomputation of bytesperline */
++ dev->v_fmt.fmt.pix.bytesperline = 0;
++
++ unicam_reset_format(dev);
++
++ return ret;
++}
++
++static int unicam_query_dv_timings(struct file *file, void *priv,
++ struct v4l2_dv_timings *timings)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ return v4l2_subdev_call(dev->sensor, video, query_dv_timings, timings);
++}
++
++static int unicam_enum_dv_timings(struct file *file, void *priv,
++ struct v4l2_enum_dv_timings *timings)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ return v4l2_subdev_call(dev->sensor, pad, enum_dv_timings, timings);
++}
++
++static int unicam_dv_timings_cap(struct file *file, void *priv,
++ struct v4l2_dv_timings_cap *cap)
++{
++ struct unicam_device *dev = video_drvdata(file);
++
++ return v4l2_subdev_call(dev->sensor, pad, dv_timings_cap, cap);
++}
++
++static int unicam_subscribe_event(struct v4l2_fh *fh,
++ const struct v4l2_event_subscription *sub)
++{
++ switch (sub->type) {
++ case V4L2_EVENT_SOURCE_CHANGE:
++ return v4l2_event_subscribe(fh, sub, 4, NULL);
++ }
++
++ return v4l2_ctrl_subscribe_event(fh, sub);
++}
++
++static int unicam_log_status(struct file *file, void *fh)
++{
++ struct unicam_device *dev = video_drvdata(file);
++ struct unicam_cfg *cfg = &dev->cfg;
++ u32 reg;
++
++ /* status for sub devices */
++ v4l2_device_call_all(&dev->v4l2_dev, 0, core, log_status);
++
++ unicam_info(dev, "-----Receiver status-----\n");
++ unicam_info(dev, "V4L2 width/height: %ux%u\n",
++ dev->v_fmt.fmt.pix.width, dev->v_fmt.fmt.pix.height);
++ unicam_info(dev, "Mediabus format: %08x\n", dev->fmt->code);
++ unicam_info(dev, "V4L2 format: %08x\n",
++ dev->v_fmt.fmt.pix.pixelformat);
++ reg = reg_read(&dev->cfg, UNICAM_IPIPE);
++ unicam_info(dev, "Unpacking/packing: %u / %u\n",
++ get_field(reg, UNICAM_PUM_MASK),
++ get_field(reg, UNICAM_PPM_MASK));
++ unicam_info(dev, "----Live data----\n");
++ unicam_info(dev, "Programmed stride: %4u\n",
++ reg_read(cfg, UNICAM_IBLS));
++ unicam_info(dev, "Detected resolution: %ux%u\n",
++ reg_read(cfg, UNICAM_IHSTA),
++ reg_read(cfg, UNICAM_IVSTA));
++ unicam_info(dev, "Write pointer: %08x\n",
++ reg_read(cfg, UNICAM_IBWP));
++
++ return 0;
++}
++
++static void unicam_notify(struct v4l2_subdev *sd,
++ unsigned int notification, void *arg)
++{
++ struct unicam_device *dev =
++ container_of(sd->v4l2_dev, struct unicam_device, v4l2_dev);
++
++ switch (notification) {
++ case V4L2_DEVICE_NOTIFY_EVENT:
++ v4l2_event_queue(&dev->video_dev, arg);
++ break;
++ default:
++ break;
++ }
++}
++
++static const struct vb2_ops unicam_video_qops = {
++ .wait_prepare = vb2_ops_wait_prepare,
++ .wait_finish = vb2_ops_wait_finish,
++ .queue_setup = unicam_queue_setup,
++ .buf_prepare = unicam_buffer_prepare,
++ .buf_queue = unicam_buffer_queue,
++ .start_streaming = unicam_start_streaming,
++ .stop_streaming = unicam_stop_streaming,
++};
++
++/*
++ * unicam_open : This function is based on the v4l2_fh_open helper function.
++ * It has been augmented to handle sensor subdevice power management,
++ */
++static int unicam_open(struct file *file)
++{
++ struct unicam_device *dev = video_drvdata(file);
++ int ret;
++
++ mutex_lock(&dev->lock);
++
++ ret = v4l2_fh_open(file);
++ if (ret) {
++ unicam_err(dev, "v4l2_fh_open failed\n");
++ goto unlock;
++ }
++
++ if (!v4l2_fh_is_singular_file(file))
++ goto unlock;
++
++ ret = v4l2_subdev_call(dev->sensor, core, s_power, 1);
++ if (ret < 0 && ret != -ENOIOCTLCMD) {
++ v4l2_fh_release(file);
++ goto unlock;
++ }
++
++ ret = 0;
++
++unlock:
++ mutex_unlock(&dev->lock);
++ return ret;
++}
++
++static int unicam_release(struct file *file)
++{
++ struct unicam_device *dev = video_drvdata(file);
++ struct v4l2_subdev *sd = dev->sensor;
++ bool fh_singular;
++ int ret;
++
++ mutex_lock(&dev->lock);
++
++ fh_singular = v4l2_fh_is_singular_file(file);
++
++ ret = _vb2_fop_release(file, NULL);
++
++ if (fh_singular)
++ v4l2_subdev_call(sd, core, s_power, 0);
++
++ mutex_unlock(&dev->lock);
++
++ return ret;
++}
++
++/* unicam capture driver file operations */
++static const struct v4l2_file_operations unicam_fops = {
++ .owner = THIS_MODULE,
++ .open = unicam_open,
++ .release = unicam_release,
++ .read = vb2_fop_read,
++ .poll = vb2_fop_poll,
++ .unlocked_ioctl = video_ioctl2,
++ .mmap = vb2_fop_mmap,
++};
++
++/* unicam capture ioctl operations */
++static const struct v4l2_ioctl_ops unicam_ioctl_ops = {
++ .vidioc_querycap = unicam_querycap,
++ .vidioc_enum_fmt_vid_cap = unicam_enum_fmt_vid_cap,
++ .vidioc_g_fmt_vid_cap = unicam_g_fmt_vid_cap,
++ .vidioc_s_fmt_vid_cap = unicam_s_fmt_vid_cap,
++ .vidioc_try_fmt_vid_cap = unicam_try_fmt_vid_cap,
++
++ .vidioc_enum_input = unicam_enum_input,
++ .vidioc_g_input = unicam_g_input,
++ .vidioc_s_input = unicam_s_input,
++
++ .vidioc_querystd = unicam_querystd,
++ .vidioc_s_std = unicam_s_std,
++ .vidioc_g_std = unicam_g_std,
++
++ .vidioc_g_edid = unicam_g_edid,
++ .vidioc_s_edid = unicam_s_edid,
++
++ .vidioc_enum_framesizes = unicam_enum_framesizes,
++ .vidioc_enum_frameintervals = unicam_enum_frameintervals,
++
++ .vidioc_g_parm = unicam_g_parm,
++ .vidioc_s_parm = unicam_s_parm,
++
++ .vidioc_s_dv_timings = unicam_s_dv_timings,
++ .vidioc_g_dv_timings = unicam_g_dv_timings,
++ .vidioc_query_dv_timings = unicam_query_dv_timings,
++ .vidioc_enum_dv_timings = unicam_enum_dv_timings,
++ .vidioc_dv_timings_cap = unicam_dv_timings_cap,
++
++ .vidioc_reqbufs = vb2_ioctl_reqbufs,
++ .vidioc_create_bufs = vb2_ioctl_create_bufs,
++ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
++ .vidioc_querybuf = vb2_ioctl_querybuf,
++ .vidioc_qbuf = vb2_ioctl_qbuf,
++ .vidioc_dqbuf = vb2_ioctl_dqbuf,
++ .vidioc_expbuf = vb2_ioctl_expbuf,
++ .vidioc_streamon = vb2_ioctl_streamon,
++ .vidioc_streamoff = vb2_ioctl_streamoff,
++
++ .vidioc_log_status = unicam_log_status,
++ .vidioc_subscribe_event = unicam_subscribe_event,
++ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
++};
++
++static int
++unicam_async_bound(struct v4l2_async_notifier *notifier,
++ struct v4l2_subdev *subdev,
++ struct v4l2_async_subdev *asd)
++{
++ struct unicam_device *unicam = container_of(notifier->v4l2_dev,
++ struct unicam_device, v4l2_dev);
++
++ if (unicam->sensor) {
++ unicam_info(unicam, "Rejecting subdev %s (Already set!!)",
++ subdev->name);
++ return 0;
++ }
++
++ unicam->sensor = subdev;
++ unicam_dbg(1, unicam, "Using sensor %s for capture\n", subdev->name);
++
++ return 0;
++}
++
++static int unicam_probe_complete(struct unicam_device *unicam)
++{
++ struct video_device *vdev;
++ struct vb2_queue *q;
++ struct v4l2_mbus_framefmt mbus_fmt = {0};
++ const struct unicam_fmt *fmt;
++ int ret;
++
++ v4l2_set_subdev_hostdata(unicam->sensor, unicam);
++
++ unicam->v4l2_dev.notify = unicam_notify;
++
++ unicam->sensor_config = v4l2_subdev_alloc_pad_config(unicam->sensor);
++ if (!unicam->sensor_config)
++ return -ENOMEM;
++
++ ret = __subdev_get_format(unicam, &mbus_fmt);
++ if (ret) {
++ unicam_err(unicam, "Failed to get_format - ret %d\n", ret);
++ return ret;
++ }
++
++ fmt = find_format_by_code(mbus_fmt.code);
++ if (!fmt) {
++ /* Find the first format that the sensor and unicam both
++ * support
++ */
++ fmt = get_first_supported_format(unicam);
++
++ if (!fmt)
++ /* No compatible formats */
++ return -EINVAL;
++
++ mbus_fmt.code = fmt->code;
++ ret = __subdev_set_format(unicam, &mbus_fmt);
++ if (ret)
++ return -EINVAL;
++ }
++ if (mbus_fmt.field != V4L2_FIELD_NONE) {
++ /* Interlaced not supported - disable it now. */
++ mbus_fmt.field = V4L2_FIELD_NONE;
++ ret = __subdev_set_format(unicam, &mbus_fmt);
++ if (ret)
++ return -EINVAL;
++ }
++
++ unicam->fmt = fmt;
++ if (fmt->fourcc)
++ unicam->v_fmt.fmt.pix.pixelformat = fmt->fourcc;
++ else
++ unicam->v_fmt.fmt.pix.pixelformat = fmt->repacked_fourcc;
++
++ /* Read current subdev format */
++ unicam_reset_format(unicam);
++
++ if (v4l2_subdev_has_op(unicam->sensor, video, s_std)) {
++ v4l2_std_id tvnorms;
++
++ if (WARN_ON(!v4l2_subdev_has_op(unicam->sensor, video,
++ g_tvnorms)))
++ /*
++ * Subdevice should not advertise s_std but not
++ * g_tvnorms
++ */
++ return -EINVAL;
++
++ ret = v4l2_subdev_call(unicam->sensor, video,
++ g_tvnorms, &tvnorms);
++ if (WARN_ON(ret))
++ return -EINVAL;
++ unicam->video_dev.tvnorms |= tvnorms;
++ }
++
++ spin_lock_init(&unicam->dma_queue_lock);
++ mutex_init(&unicam->lock);
++
++ /* Add controls from the subdevice */
++ ret = v4l2_ctrl_add_handler(&unicam->ctrl_handler,
++ unicam->sensor->ctrl_handler, NULL, true);
++ if (ret < 0)
++ return ret;
++
++ q = &unicam->buffer_queue;
++ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
++ q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
++ q->drv_priv = unicam;
++ q->ops = &unicam_video_qops;
++ q->mem_ops = &vb2_dma_contig_memops;
++ q->buf_struct_size = sizeof(struct unicam_buffer);
++ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
++ q->lock = &unicam->lock;
++ q->min_buffers_needed = 2;
++ q->dev = &unicam->pdev->dev;
++
++ ret = vb2_queue_init(q);
++ if (ret) {
++ unicam_err(unicam, "vb2_queue_init() failed\n");
++ return ret;
++ }
++
++ INIT_LIST_HEAD(&unicam->dma_queue.active);
++
++ vdev = &unicam->video_dev;
++ strlcpy(vdev->name, UNICAM_MODULE_NAME, sizeof(vdev->name));
++ vdev->release = video_device_release_empty;
++ vdev->fops = &unicam_fops;
++ vdev->ioctl_ops = &unicam_ioctl_ops;
++ vdev->v4l2_dev = &unicam->v4l2_dev;
++ vdev->vfl_dir = VFL_DIR_RX;
++ vdev->queue = q;
++ vdev->lock = &unicam->lock;
++ vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
++ V4L2_CAP_READWRITE;
++
++ /* If the source has no controls then remove our ctrl handler. */
++ if (list_empty(&unicam->ctrl_handler.ctrls))
++ unicam->v4l2_dev.ctrl_handler = NULL;
++
++ video_set_drvdata(vdev, unicam);
++ vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT;
++
++ if (!v4l2_subdev_has_op(unicam->sensor, video, s_std)) {
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_STD);
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_STD);
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUMSTD);
++ }
++ if (!v4l2_subdev_has_op(unicam->sensor, video, querystd))
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_QUERYSTD);
++ if (!v4l2_subdev_has_op(unicam->sensor, video, s_dv_timings)) {
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_EDID);
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_EDID);
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_DV_TIMINGS_CAP);
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_DV_TIMINGS);
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_DV_TIMINGS);
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUM_DV_TIMINGS);
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_QUERY_DV_TIMINGS);
++ }
++ if (!v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_interval))
++ v4l2_disable_ioctl(&unicam->video_dev,
++ VIDIOC_ENUM_FRAMEINTERVALS);
++ if (!v4l2_subdev_has_op(unicam->sensor, video, g_frame_interval))
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_G_PARM);
++ if (!v4l2_subdev_has_op(unicam->sensor, video, s_frame_interval))
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_S_PARM);
++
++ if (!v4l2_subdev_has_op(unicam->sensor, pad, enum_frame_size))
++ v4l2_disable_ioctl(&unicam->video_dev, VIDIOC_ENUM_FRAMESIZES);
++
++ ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
++ if (ret) {
++ unicam_err(unicam, "Unable to register video device.\n");
++ return ret;
++ }
++
++ ret = v4l2_device_register_ro_subdev_nodes(&unicam->v4l2_dev);
++ if (ret) {
++ unicam_err(unicam,
++ "Unable to register subdev nodes.\n");
++ video_unregister_device(&unicam->video_dev);
++ return ret;
++ }
++
++ ret = media_create_pad_link(&unicam->sensor->entity, 0,
++ &unicam->video_dev.entity, 0,
++ MEDIA_LNK_FL_ENABLED |
++ MEDIA_LNK_FL_IMMUTABLE);
++ if (ret) {
++ unicam_err(unicam, "Unable to create pad links.\n");
++ video_unregister_device(&unicam->video_dev);
++ return ret;
++ }
++
++ return 0;
++}
++
++static int unicam_async_complete(struct v4l2_async_notifier *notifier)
++{
++ struct unicam_device *unicam = container_of(notifier->v4l2_dev,
++ struct unicam_device, v4l2_dev);
++
++ return unicam_probe_complete(unicam);
++}
++
++static const struct v4l2_async_notifier_operations unicam_async_ops = {
++ .bound = unicam_async_bound,
++ .complete = unicam_async_complete,
++};
++
++static int of_unicam_connect_subdevs(struct unicam_device *dev)
++{
++ struct platform_device *pdev = dev->pdev;
++ struct device_node *parent, *ep_node = NULL, *remote_ep = NULL,
++ *sensor_node = NULL;
++ struct v4l2_fwnode_endpoint *ep;
++ struct v4l2_async_subdev *asd;
++ unsigned int peripheral_data_lanes;
++ int ret = -EINVAL;
++ unsigned int lane;
++
++ parent = pdev->dev.of_node;
++
++ asd = &dev->asd;
++ ep = &dev->endpoint;
++
++ ep_node = of_graph_get_next_endpoint(parent, NULL);
++ if (!ep_node) {
++ unicam_dbg(3, dev, "can't get next endpoint\n");
++ goto cleanup_exit;
++ }
++
++ unicam_dbg(3, dev, "ep_node is %s\n", ep_node->name);
++
++ v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), ep);
++
++ for (lane = 0; lane < ep->bus.mipi_csi2.num_data_lanes; lane++) {
++ if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) {
++ unicam_err(dev, "Local endpoint - data lane reordering not supported\n");
++ goto cleanup_exit;
++ }
++ }
++
++ peripheral_data_lanes = ep->bus.mipi_csi2.num_data_lanes;
++
++ sensor_node = of_graph_get_remote_port_parent(ep_node);
++ if (!sensor_node) {
++ unicam_dbg(3, dev, "can't get remote parent\n");
++ goto cleanup_exit;
++ }
++ unicam_dbg(3, dev, "sensor_node is %s\n", sensor_node->name);
++ asd->match_type = V4L2_ASYNC_MATCH_FWNODE;
++ asd->match.fwnode = of_fwnode_handle(sensor_node);
++
++ remote_ep = of_graph_get_remote_endpoint(ep_node);
++ if (!remote_ep) {
++ unicam_dbg(3, dev, "can't get remote-endpoint\n");
++ goto cleanup_exit;
++ }
++ unicam_dbg(3, dev, "remote_ep is %s\n", remote_ep->name);
++ v4l2_fwnode_endpoint_parse(of_fwnode_handle(remote_ep), ep);
++ unicam_dbg(3, dev, "parsed remote_ep to endpoint. nr_of_link_frequencies %u, bus_type %u\n",
++ ep->nr_of_link_frequencies, ep->bus_type);
++
++ switch (ep->bus_type) {
++ case V4L2_MBUS_CSI2_DPHY:
++ if (ep->bus.mipi_csi2.num_data_lanes >
++ peripheral_data_lanes) {
++ unicam_err(dev, "Subdevice %s wants too many data lanes (%u > %u)\n",
++ sensor_node->name,
++ ep->bus.mipi_csi2.num_data_lanes,
++ peripheral_data_lanes);
++ goto cleanup_exit;
++ }
++ for (lane = 0;
++ lane < ep->bus.mipi_csi2.num_data_lanes;
++ lane++) {
++ if (ep->bus.mipi_csi2.data_lanes[lane] != lane + 1) {
++ unicam_err(dev, "Subdevice %s - incompatible data lane config\n",
++ sensor_node->name);
++ goto cleanup_exit;
++ }
++ }
++ dev->max_data_lanes = ep->bus.mipi_csi2.num_data_lanes;
++ dev->bus_flags = ep->bus.mipi_csi2.flags;
++ break;
++ case V4L2_MBUS_CCP2:
++ if (ep->bus.mipi_csi1.clock_lane != 0 ||
++ ep->bus.mipi_csi1.data_lane != 1) {
++ unicam_err(dev, "Subdevice %s incompatible lane config\n",
++ sensor_node->name);
++ goto cleanup_exit;
++ }
++ dev->max_data_lanes = 1;
++ dev->bus_flags = ep->bus.mipi_csi1.strobe;
++ break;
++ default:
++ /* Unsupported bus type */
++ unicam_err(dev, "sub-device %s is not a CSI2 or CCP2 device %d\n",
++ sensor_node->name, ep->bus_type);
++ goto cleanup_exit;
++ }
++
++ /* Store bus type - CSI2 or CCP2 */
++ dev->bus_type = ep->bus_type;
++ unicam_dbg(3, dev, "bus_type is %d\n", dev->bus_type);
++
++ /* Store Virtual Channel number */
++ dev->virtual_channel = ep->base.id;
++
++ unicam_dbg(3, dev, "v4l2-endpoint: %s\n",
++ dev->bus_type == V4L2_MBUS_CSI2_DPHY ? "CSI2" : "CCP2");
++ unicam_dbg(3, dev, "Virtual Channel=%d\n", dev->virtual_channel);
++ if (dev->bus_type == V4L2_MBUS_CSI2_DPHY)
++ unicam_dbg(3, dev, "flags=0x%08x\n", ep->bus.mipi_csi2.flags);
++ unicam_dbg(3, dev, "num_data_lanes=%d\n", dev->max_data_lanes);
++
++ unicam_dbg(1, dev, "found sub-device %s\n", sensor_node->name);
++
++ v4l2_async_notifier_init(&dev->notifier);
++
++ ret = v4l2_async_notifier_add_subdev(&dev->notifier, asd);
++ if (ret) {
++ unicam_err(dev, "Error adding subdevice - ret %d\n", ret);
++ goto cleanup_exit;
++ }
++
++ dev->notifier.ops = &unicam_async_ops;
++ ret = v4l2_async_notifier_register(&dev->v4l2_dev,
++ &dev->notifier);
++ if (ret) {
++ unicam_err(dev, "Error registering async notifier - ret %d\n",
++ ret);
++ ret = -EINVAL;
++ }
++
++cleanup_exit:
++ if (remote_ep)
++ of_node_put(remote_ep);
++ if (sensor_node)
++ of_node_put(sensor_node);
++ if (ep_node)
++ of_node_put(ep_node);
++
++ return ret;
++}
++
++static int unicam_probe(struct platform_device *pdev)
++{
++ struct unicam_cfg *unicam_cfg;
++ struct unicam_device *unicam;
++ struct v4l2_ctrl_handler *hdl;
++ struct resource *res;
++ int ret;
++
++ unicam = devm_kzalloc(&pdev->dev, sizeof(*unicam), GFP_KERNEL);
++ if (!unicam)
++ return -ENOMEM;
++
++ unicam->pdev = pdev;
++ unicam_cfg = &unicam->cfg;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ unicam_cfg->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(unicam_cfg->base)) {
++ unicam_err(unicam, "Failed to get main io block\n");
++ return PTR_ERR(unicam_cfg->base);
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ unicam_cfg->clk_gate_base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(unicam_cfg->clk_gate_base)) {
++ unicam_err(unicam, "Failed to get 2nd io block\n");
++ return PTR_ERR(unicam_cfg->clk_gate_base);
++ }
++
++ unicam->clock = devm_clk_get(&pdev->dev, "lp");
++ if (IS_ERR(unicam->clock)) {
++ unicam_err(unicam, "Failed to get clock\n");
++ return PTR_ERR(unicam->clock);
++ }
++
++ ret = platform_get_irq(pdev, 0);
++ if (ret <= 0) {
++ dev_err(&pdev->dev, "No IRQ resource\n");
++ return -ENODEV;
++ }
++
++ ret = devm_request_irq(&pdev->dev, ret, unicam_isr, 0,
++ "unicam_capture0", unicam);
++ if (ret) {
++ dev_err(&pdev->dev, "Unable to request interrupt\n");
++ return -EINVAL;
++ }
++
++ unicam->mdev.dev = &pdev->dev;
++ strscpy(unicam->mdev.model, UNICAM_MODULE_NAME,
++ sizeof(unicam->mdev.model));
++ strscpy(unicam->mdev.serial, "", sizeof(unicam->mdev.serial));
++ snprintf(unicam->mdev.bus_info, sizeof(unicam->mdev.bus_info),
++ "platform:%s %s",
++ pdev->dev.driver->name, dev_name(&pdev->dev));
++ unicam->mdev.hw_revision = 1;
++
++ media_entity_pads_init(&unicam->video_dev.entity, 1, &unicam->pad);
++ media_device_init(&unicam->mdev);
++
++ unicam->v4l2_dev.mdev = &unicam->mdev;
++
++ ret = v4l2_device_register(&pdev->dev, &unicam->v4l2_dev);
++ if (ret) {
++ unicam_err(unicam,
++ "Unable to register v4l2 device.\n");
++ goto media_cleanup;
++ }
++
++ ret = media_device_register(&unicam->mdev);
++ if (ret < 0) {
++ unicam_err(unicam,
++ "Unable to register media-controller device.\n");
++ goto probe_out_v4l2_unregister;
++ }
++
++ /* Reserve space for the controls */
++ hdl = &unicam->ctrl_handler;
++ ret = v4l2_ctrl_handler_init(hdl, 16);
++ if (ret < 0)
++ goto media_unregister;
++ unicam->v4l2_dev.ctrl_handler = hdl;
++
++ /* set the driver data in platform device */
++ platform_set_drvdata(pdev, unicam);
++
++ ret = of_unicam_connect_subdevs(unicam);
++ if (ret) {
++ dev_err(&pdev->dev, "Failed to connect subdevs\n");
++ goto free_hdl;
++ }
++
++ /* Enable the block power domain */
++ pm_runtime_enable(&pdev->dev);
++
++ return 0;
++
++free_hdl:
++ v4l2_ctrl_handler_free(hdl);
++media_unregister:
++ media_device_unregister(&unicam->mdev);
++probe_out_v4l2_unregister:
++ v4l2_device_unregister(&unicam->v4l2_dev);
++media_cleanup:
++ media_device_cleanup(&unicam->mdev);
++
++ return ret;
++}
++
++static int unicam_remove(struct platform_device *pdev)
++{
++ struct unicam_device *unicam = platform_get_drvdata(pdev);
++
++ unicam_dbg(2, unicam, "%s\n", __func__);
++
++ pm_runtime_disable(&pdev->dev);
++
++ v4l2_async_notifier_unregister(&unicam->notifier);
++ v4l2_ctrl_handler_free(&unicam->ctrl_handler);
++ v4l2_device_unregister(&unicam->v4l2_dev);
++ video_unregister_device(&unicam->video_dev);
++ if (unicam->sensor_config)
++ v4l2_subdev_free_pad_config(unicam->sensor_config);
++ media_device_unregister(&unicam->mdev);
++ media_device_cleanup(&unicam->mdev);
++
++ return 0;
++}
++
++static const struct of_device_id unicam_of_match[] = {
++ { .compatible = "brcm,bcm2835-unicam", },
++ { /* sentinel */ },
++};
++MODULE_DEVICE_TABLE(of, unicam_of_match);
++
++static struct platform_driver unicam_driver = {
++ .probe = unicam_probe,
++ .remove = unicam_remove,
++ .driver = {
++ .name = UNICAM_MODULE_NAME,
++ .of_match_table = of_match_ptr(unicam_of_match),
++ },
++};
++
++module_platform_driver(unicam_driver);
++
++MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.com>");
++MODULE_DESCRIPTION("BCM2835 Unicam driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(UNICAM_VERSION);
+--- /dev/null
++++ b/drivers/media/platform/bcm2835/vc4-regs-unicam.h
+@@ -0,0 +1,253 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++/*
++ * Copyright (C) 2017-2020 Raspberry Pi Trading.
++ * Dave Stevenson <dave.stevenson@raspberrypi.com>
++ */
++
++#ifndef VC4_REGS_UNICAM_H
++#define VC4_REGS_UNICAM_H
++
++/*
++ * The following values are taken from files found within the code drop
++ * made by Broadcom for the BCM21553 Graphics Driver, predominantly in
++ * brcm_usrlib/dag/vmcsx/vcinclude/hardware_vc4.h.
++ * They have been modified to be only the register offset.
++ */
++#define UNICAM_CTRL 0x000
++#define UNICAM_STA 0x004
++#define UNICAM_ANA 0x008
++#define UNICAM_PRI 0x00c
++#define UNICAM_CLK 0x010
++#define UNICAM_CLT 0x014
++#define UNICAM_DAT0 0x018
++#define UNICAM_DAT1 0x01c
++#define UNICAM_DAT2 0x020
++#define UNICAM_DAT3 0x024
++#define UNICAM_DLT 0x028
++#define UNICAM_CMP0 0x02c
++#define UNICAM_CMP1 0x030
++#define UNICAM_CAP0 0x034
++#define UNICAM_CAP1 0x038
++#define UNICAM_ICTL 0x100
++#define UNICAM_ISTA 0x104
++#define UNICAM_IDI0 0x108
++#define UNICAM_IPIPE 0x10c
++#define UNICAM_IBSA0 0x110
++#define UNICAM_IBEA0 0x114
++#define UNICAM_IBLS 0x118
++#define UNICAM_IBWP 0x11c
++#define UNICAM_IHWIN 0x120
++#define UNICAM_IHSTA 0x124
++#define UNICAM_IVWIN 0x128
++#define UNICAM_IVSTA 0x12c
++#define UNICAM_ICC 0x130
++#define UNICAM_ICS 0x134
++#define UNICAM_IDC 0x138
++#define UNICAM_IDPO 0x13c
++#define UNICAM_IDCA 0x140
++#define UNICAM_IDCD 0x144
++#define UNICAM_IDS 0x148
++#define UNICAM_DCS 0x200
++#define UNICAM_DBSA0 0x204
++#define UNICAM_DBEA0 0x208
++#define UNICAM_DBWP 0x20c
++#define UNICAM_DBCTL 0x300
++#define UNICAM_IBSA1 0x304
++#define UNICAM_IBEA1 0x308
++#define UNICAM_IDI1 0x30c
++#define UNICAM_DBSA1 0x310
++#define UNICAM_DBEA1 0x314
++#define UNICAM_MISC 0x400
++
++/*
++ * The following bitmasks are from the kernel released by Broadcom
++ * for Android - https://android.googlesource.com/kernel/bcm/
++ * The Rhea, Hawaii, and Java chips all contain the same VideoCore4
++ * Unicam block as BCM2835, as defined in eg
++ * arch/arm/mach-rhea/include/mach/rdb_A0/brcm_rdb_cam.h and similar.
++ * Values reworked to use the kernel BIT and GENMASK macros.
++ *
++ * Some of the bit mnenomics have been amended to match the datasheet.
++ */
++/* UNICAM_CTRL Register */
++#define UNICAM_CPE BIT(0)
++#define UNICAM_MEM BIT(1)
++#define UNICAM_CPR BIT(2)
++#define UNICAM_CPM_MASK GENMASK(3, 3)
++#define UNICAM_CPM_CSI2 0
++#define UNICAM_CPM_CCP2 1
++#define UNICAM_SOE BIT(4)
++#define UNICAM_DCM_MASK GENMASK(5, 5)
++#define UNICAM_DCM_STROBE 0
++#define UNICAM_DCM_DATA 1
++#define UNICAM_SLS BIT(6)
++#define UNICAM_PFT_MASK GENMASK(11, 8)
++#define UNICAM_OET_MASK GENMASK(20, 12)
++
++/* UNICAM_STA Register */
++#define UNICAM_SYN BIT(0)
++#define UNICAM_CS BIT(1)
++#define UNICAM_SBE BIT(2)
++#define UNICAM_PBE BIT(3)
++#define UNICAM_HOE BIT(4)
++#define UNICAM_PLE BIT(5)
++#define UNICAM_SSC BIT(6)
++#define UNICAM_CRCE BIT(7)
++#define UNICAM_OES BIT(8)
++#define UNICAM_IFO BIT(9)
++#define UNICAM_OFO BIT(10)
++#define UNICAM_BFO BIT(11)
++#define UNICAM_DL BIT(12)
++#define UNICAM_PS BIT(13)
++#define UNICAM_IS BIT(14)
++#define UNICAM_PI0 BIT(15)
++#define UNICAM_PI1 BIT(16)
++#define UNICAM_FSI_S BIT(17)
++#define UNICAM_FEI_S BIT(18)
++#define UNICAM_LCI_S BIT(19)
++#define UNICAM_BUF0_RDY BIT(20)
++#define UNICAM_BUF0_NO BIT(21)
++#define UNICAM_BUF1_RDY BIT(22)
++#define UNICAM_BUF1_NO BIT(23)
++#define UNICAM_DI BIT(24)
++
++#define UNICAM_STA_MASK_ALL \
++ (UNICAM_DL + \
++ UNICAM_SBE + \
++ UNICAM_PBE + \
++ UNICAM_HOE + \
++ UNICAM_PLE + \
++ UNICAM_SSC + \
++ UNICAM_CRCE + \
++ UNICAM_IFO + \
++ UNICAM_OFO + \
++ UNICAM_PS + \
++ UNICAM_PI0 + \
++ UNICAM_PI1)
++
++/* UNICAM_ANA Register */
++#define UNICAM_APD BIT(0)
++#define UNICAM_BPD BIT(1)
++#define UNICAM_AR BIT(2)
++#define UNICAM_DDL BIT(3)
++#define UNICAM_CTATADJ_MASK GENMASK(7, 4)
++#define UNICAM_PTATADJ_MASK GENMASK(11, 8)
++
++/* UNICAM_PRI Register */
++#define UNICAM_PE BIT(0)
++#define UNICAM_PT_MASK GENMASK(2, 1)
++#define UNICAM_NP_MASK GENMASK(7, 4)
++#define UNICAM_PP_MASK GENMASK(11, 8)
++#define UNICAM_BS_MASK GENMASK(15, 12)
++#define UNICAM_BL_MASK GENMASK(17, 16)
++
++/* UNICAM_CLK Register */
++#define UNICAM_CLE BIT(0)
++#define UNICAM_CLPD BIT(1)
++#define UNICAM_CLLPE BIT(2)
++#define UNICAM_CLHSE BIT(3)
++#define UNICAM_CLTRE BIT(4)
++#define UNICAM_CLAC_MASK GENMASK(8, 5)
++#define UNICAM_CLSTE BIT(29)
++
++/* UNICAM_CLT Register */
++#define UNICAM_CLT1_MASK GENMASK(7, 0)
++#define UNICAM_CLT2_MASK GENMASK(15, 8)
++
++/* UNICAM_DATn Registers */
++#define UNICAM_DLE BIT(0)
++#define UNICAM_DLPD BIT(1)
++#define UNICAM_DLLPE BIT(2)
++#define UNICAM_DLHSE BIT(3)
++#define UNICAM_DLTRE BIT(4)
++#define UNICAM_DLSM BIT(5)
++#define UNICAM_DLFO BIT(28)
++#define UNICAM_DLSTE BIT(29)
++
++#define UNICAM_DAT_MASK_ALL (UNICAM_DLSTE + UNICAM_DLFO)
++
++/* UNICAM_DLT Register */
++#define UNICAM_DLT1_MASK GENMASK(7, 0)
++#define UNICAM_DLT2_MASK GENMASK(15, 8)
++#define UNICAM_DLT3_MASK GENMASK(23, 16)
++
++/* UNICAM_ICTL Register */
++#define UNICAM_FSIE BIT(0)
++#define UNICAM_FEIE BIT(1)
++#define UNICAM_IBOB BIT(2)
++#define UNICAM_FCM BIT(3)
++#define UNICAM_TFC BIT(4)
++#define UNICAM_LIP_MASK GENMASK(6, 5)
++#define UNICAM_LCIE_MASK GENMASK(28, 16)
++
++/* UNICAM_IDI0/1 Register */
++#define UNICAM_ID0_MASK GENMASK(7, 0)
++#define UNICAM_ID1_MASK GENMASK(15, 8)
++#define UNICAM_ID2_MASK GENMASK(23, 16)
++#define UNICAM_ID3_MASK GENMASK(31, 24)
++
++/* UNICAM_ISTA Register */
++#define UNICAM_FSI BIT(0)
++#define UNICAM_FEI BIT(1)
++#define UNICAM_LCI BIT(2)
++
++#define UNICAM_ISTA_MASK_ALL (UNICAM_FSI + UNICAM_FEI + UNICAM_LCI)
++
++/* UNICAM_IPIPE Register */
++#define UNICAM_PUM_MASK GENMASK(2, 0)
++ /* Unpacking modes */
++ #define UNICAM_PUM_NONE 0
++ #define UNICAM_PUM_UNPACK6 1
++ #define UNICAM_PUM_UNPACK7 2
++ #define UNICAM_PUM_UNPACK8 3
++ #define UNICAM_PUM_UNPACK10 4
++ #define UNICAM_PUM_UNPACK12 5
++ #define UNICAM_PUM_UNPACK14 6
++ #define UNICAM_PUM_UNPACK16 7
++#define UNICAM_DDM_MASK GENMASK(6, 3)
++#define UNICAM_PPM_MASK GENMASK(9, 7)
++ /* Packing modes */
++ #define UNICAM_PPM_NONE 0
++ #define UNICAM_PPM_PACK8 1
++ #define UNICAM_PPM_PACK10 2
++ #define UNICAM_PPM_PACK12 3
++ #define UNICAM_PPM_PACK14 4
++ #define UNICAM_PPM_PACK16 5
++#define UNICAM_DEM_MASK GENMASK(11, 10)
++#define UNICAM_DEBL_MASK GENMASK(14, 12)
++#define UNICAM_ICM_MASK GENMASK(16, 15)
++#define UNICAM_IDM_MASK GENMASK(17, 17)
++
++/* UNICAM_ICC Register */
++#define UNICAM_ICFL_MASK GENMASK(4, 0)
++#define UNICAM_ICFH_MASK GENMASK(9, 5)
++#define UNICAM_ICST_MASK GENMASK(12, 10)
++#define UNICAM_ICLT_MASK GENMASK(15, 13)
++#define UNICAM_ICLL_MASK GENMASK(31, 16)
++
++/* UNICAM_DCS Register */
++#define UNICAM_DIE BIT(0)
++#define UNICAM_DIM BIT(1)
++#define UNICAM_DBOB BIT(3)
++#define UNICAM_FDE BIT(4)
++#define UNICAM_LDP BIT(5)
++#define UNICAM_EDL_MASK GENMASK(15, 8)
++
++/* UNICAM_DBCTL Register */
++#define UNICAM_DBEN BIT(0)
++#define UNICAM_BUF0_IE BIT(1)
++#define UNICAM_BUF1_IE BIT(2)
++
++/* UNICAM_CMP[0,1] register */
++#define UNICAM_PCE BIT(31)
++#define UNICAM_GI BIT(9)
++#define UNICAM_CPH BIT(8)
++#define UNICAM_PCVC_MASK GENMASK(7, 6)
++#define UNICAM_PCDT_MASK GENMASK(5, 0)
++
++/* UNICAM_MISC register */
++#define UNICAM_FL0 BIT(6)
++#define UNICAM_FL1 BIT(9)
++
++#endif